Crocheted hat: pattern “Tiger Cub. Crochet tiger hat Winter hat knitted for a boy: diagram

You will need: 30 g black, 25 g orange, some white acrylic yarn of medium thickness; hook No. 3.5; wool needle; 2 black and 2 orange buttons.

Patterns: air. p., art. b/n, semi-st., conn. Art. Knitting density. Half-stitch: 14 p. and 11 p. = 10 x 10 cm.

A cap

1st circle. r.: use an orange thread to make a thread ring, tie 2 air. p. rise instead of the 1st half st. and perform another 8 half stitches in the ring. Close the row of connections. Art. in the 2nd air. rise p. = 9 p. (including air lift p.).

2nd circle. r.: (add to all points): 2 air. p. lifting instead of the 1st semi-st., in the base 2 air. p. knit 1 half st. (addition). Knit 2 half sts.
from each point of the base. Finish the row of connections. Art. in the last air n. rise of the previous river. (= 18 half stitches).

3rd circle. r.: (add after 1 p.): With a black thread, tie 2 air. p. lifting, * 2 half st. in 1 st. base (1 addition) and 1 half st. in the next paragraph of the base*. Repeat from * to * until the end of the r. Finish the row of connections. Art. (= 27 half st.).

4th circle. r.: (add after 2 p.): 2 air. p. lifting, * 2 half st. in 1 st. base (1 addition) and 2 half st. in the next 2 paragraphs of the base*. Repeat from * to * until the end of the r. Finish the row of connections. Art. (= 36 half stitches).

5th circle. r.: (add after 3 sts): use an orange thread to tie 2 air. p. lifting, * 2 half st. in 1 st. base (1 addition) and 3 half st. in the next 3 paragraphs of the base*. Repeat from * to * until the end of the r. Finish the row of connections. Art. (= 45 half st.).

6th circle. p.: (add after 8 p.): 2 air. p. lifting, * 2 half st. in 1 st. base (1 addition) and 8 half st. in the next 8 paragraphs of the base*. Repeat from * to * until the end of the r. Finish the row of connections. Art. (= 50 half-st.).

7th circle. r.: (add after 9 sts): use a black thread to tie 2 air. p. lifting, * 2 half st. in 1 st. base (1 addition) and 9 half st. in the next 9 paragraphs of the base*. Repeat from * to * until the end of the r. Finish the row of connections. Art. (= 55 semi-st.).

8th circle. r.: (add after 10 p.): 2 air. p. lifting, * 2 half st. in 1 st. base (1 addition) and 10 half st. in the next 10 paragraphs of the base*. Repeat from * to * until the end of the circular row. Finish the row of connections. Art. (= 60 semi-st.).

9th circle. r.: (without additions): go to the orange thread, knit 2 air. p. rise instead of 1st half stitch, 1 half stitch. in each point of the base. Finish the row of connections. Art. (= 60 semi-st.).

Knit another 11 r. the same as the 9th row, performing alternately 2 rows. orange and 2 r. black thread. Finish the work.

Ears

1st circle. r.: use a black thread to make a thread ring, tie 1 air. p. rise instead of the 1st half st., then tie another 6 tbsp into a ring. b/n. Finish the row of connections. Art. in the 2nd air. p. for lifting the chal = 6 p., taking into account air. lifting point.

2nd circle. r.: (knit without additions): 1 air. p. lifting, 1 tbsp. b/n from each point of the base. Finish the row of connections. Art. (= 12 tbsp. b/n).

3rd circle. r.: (add to all sts): tie 1 air with an orange thread. p. lifting, 2 tbsp. b/n from each point of the base (adding). Finish the row of connections. Art. in air n. rise of the previous river. (=12 tbsp. b/n).

4th circle. r.: (knit without additions): 1 air. p. lifting, 1 tbsp. b/n from each point of the base. Finish the row of connections. Art. in air n. rise of the previous river. (= 12 tbsp. b/n).

5th circle. r.: (add after 1 p.): Knit 1 air with a black thread. lifting item, *2 tbsp. b/n in 1 p. base (adding) and 1 tbsp. b/n in the next paragraph of the base*. Repeat from * to * until the end of the circular row. Finish the row of connections. Art. (= 18 tbsp. b/n).

6th circle. r.: (knit without additions): 1 air. p. lifting, 1 tbsp. b/n from each point of the base. Finish the row of connections. Art. in air n. rise of the previous river. (= 18 tbsp. b/n).

7th circle. r.: (add after 2 sts): use an orange thread to tie 1 air. lifting item, *2 tbsp. b/n in 1 p. base (adding) and 2 tbsp. b/n in the next 2 paragraphs*. Repeat from * to * until the end of the r. Finish the row of connections. Art. (= 24 tbsp. b/n).

8th circle. r.: (knit without additions): 1 air. p. lifting, 1 tbsp. b/n from each point of the base. Finish the row of connections. Art. in air n. rise of the previous river. (= 24 tbsp. b/n).

9th and 10th circle. r.: (knit without additions): with a black thread, knit 1 air. p. lifting, 1 tbsp. b/n from each point of the base. Finish the row of connections. Art. in air n. rise of the previous river. (= 24 tbsp. b/n). Finish the work. Knit 2 identical parts.

Cheeks

1st circle. r.: use a white thread to make a thread ring, tie 1 air. p. lifting and another 10 tbsp in the ring. b/n. Finish the row of connections. Art. in the initial air. p. = 10 p., excluding air. lifting point.

2nd circle. p.: (add to all points): 1 air. p. lifting, 2 tbsp. b/n in each point of the base. Finish the row of connections. Art. in air n. rise of the previous river. (= 20 tbsp. b/n). 3rd circle. r.: (add after 1 p.): 1 air. lifting item, *2 tbsp. b/n in 1 p. base (adding) and 1 tbsp. b/n in the next paragraph of the base*. Repeat from * to * until the end of the r. Finish the row of connections. Art. (= 30 tbsp. b/n). Finish the work. Knit 2 identical parts.

Nose

1st circle. r.: use a black thread to make a thread ring, tie 1 air. p. lifting and into the ring another 8 tbsp. b/n. Close the row of connections. Art. in the initial air. p. = 8 p., excluding air. lifting point.

2nd circle. p.: (add to all points): 1 air. p. lifting, 2 tbsp. b/n in each paragraph of the base (adding). Finish the row of connections. Art. in air n. rise of the previous river. (= 16 tbsp. b/n). Finish the work.

Assembly: sew the cheeks and nose to the front of the hat. Make the ears flat, fold them in half, and sew them to the top of the hat at a distance of 9 cm from each other. Glue the eyes to the muzzle with silicone glue (glue the orange button on top of the black one).

Cap "Tiger cub striped"

During the cold season, your baby will definitely need a warm hat. The “Tiger Cub Striped” model is perfect for both boys and girls. Your fidget will always be the center of attention, collecting smiles and tender glances from passers-by.

Materials:
3 skeins of yellow wool blend yarn (130 m/50 g);
black and white yarn for finishing.
hook No. 3.5;
sewing machine;
scissors;
measuring tape or ruler;
glue gun

The hat is knitted for a head volume of 49 cm and a depth of 35 cm.

Description of knitting a hat

We knit the base of the hat according to pattern 1. We knit 11 rows (the number will depend on the thickness of the yarn and the density of the knitting), we get a hexagon with an approximate diameter of 14 cm.
We knit the 12th row without increases.
This is necessary in order to round the top of the cap.

In the 13th row we add 6 loops according to the pattern, the next row is five without adding. And so on until we reach the desired diameter.
Once the required diameter is knitted, we make no more increases. Now we knit the required depth - for us it is 35 cm. We knit 34 cm and leave 1 cm for the binding, and also knit a row between the ears at the back so that the cap on the neck is longer.

1.

We knit the ears without breaking the thread. We knit the first ear like this:
Rows 1-4 12 st. b/n, 5th row - 11 tbsp. b/n, 6th row 10 tbsp. b/n., 7 row 9 tbsp. b/n, 8th row - 8 tbsp. b/n, 9 row - 7 tbsp. b/n. The width of the ear is 8-9 cm. We tie the thread to the edge of the ear and knit 13 cm (neck) + 8-9 cm (second eye).

Turn the knitting and knit the second eyelet in the same way as the first.
We tie everything with single crochets - the frame is ready.

Let's start finishing. 1st row: (2 ch, 6 sts. b/n in the 2nd ch from the hook. 6 loops. 2nd row: 6 stitches. 12 loops. 3rd row: (st. b/n, inc.)*6 18 loops. 4th row 18 loops (no increases). 5th row - (2 tbsp. b/n, inc.)*6 - 24 loops. 6th, 7 -th, 8th rows - 24 loops without increases.

2.

Take a clamp needle and black thread and embroider on the ears. Sew the ears to the base.

For the muzzle we will need white and black yarn. Eyes circles from 12 tbsp. s/n (2 parts). We knit the muzzle according to pattern 2. Just reduce the oval and cast on a chain of 5 loops, 1-2nd rows - according to the pattern, tie the 3rd row with st. b/n. Spout: 1st row - 2 vp, 3 tbsp. s/n in the 2nd from the hook, 2nd row - approx., st. s/n, approx. We tie the entire nose st. b/n.
We knit stripes and bangs like this: a chain of 6-10 ch. (on bangs - 6, on sides - 10) tie st. b/n on both sides. Let's iron.
Sew all the details to the hat. Add mustache and eyebrows. We fasten the braids.

You can dress not only warmly, but also in an original way, especially for small children who can afford to wear bright, unforgettable things. These are the hats we suggest you knit for your babies and toddlers.

One of the most interesting models is a hat in the shape of a tiger’s head. If, in addition to it, you knit a scarf with the same face (or even spots like a real tiger), you will get a whole original set. The attention of others to the child and your skills will be guaranteed.

The most intricate detail in this hat is the tiger face and stripes. All this is knitted separately and sewn to a ready-made hat base. Diagrams of all the necessary parts are in the description. And the best part is that this hat is perfect for both girls and boys. True, for a girl you can slightly modify the model by adding a bow to one of the tiger’s ears. This way the product will look just right. Moreover, the bow does not have to be knitted or crocheted; you can, quite possibly, get by with a bow made of satin ribbon.

The baby's ears will be securely covered thanks to the shape of the model itself. And it is fixed very simply - thanks to the ties. That is why the model is ideal even for the smallest children who love to walk in any weather. And if the hat is insulated with a fleece lining, then it will also become an option for winter walks in any frost (which is now relevant for many areas).

The second hat is a model for a real gnome. The main decorative part of the model is the pompom at the very top of the head. It is made of thread in a contrasting color. By the way, you can use leftover black thread on a pompom if you have an extra ball in your handicraft bins. Yes, in fact, you won’t need a lot of thread for a hat (less than 100 grams), which means you can spend a couple of remaining balls of yarn from past achievements on it. But this model is intended for older children. The hat is not fixed on the head in any way, and a tiny fidget who is always trying to look in different directions will feel cool in it.

In general, if you have free time, and in the leftovers there are several balls of a suitable color waiting for their turn for a long time, you can make two hats for your child at once. They also include scarves (if there is enough thread), and there will be two complete sets. Each of them can be worn according to your mood. And the child will have plenty to choose from.

How to knit a hat for a boy?

With the onset of the first cold weather, the issue of purchasing warm clothes for children becomes urgent. But can anything be warmer than children's jumpers, sweaters, mittens or hats knitted from natural yarn? In addition, knitting for your son or beloved grandson is a pleasure.

The small size of things for children allows you to quickly finish the job, and the ability to independently select bright colors and original styles for children leads to better results than store offers.

If you are knitting a baby hat, then you can give free rein to your imagination! You will be sure that your baby is reliably protected from wind and drafts with a warm and comfortable hat. From this article you will learn how to knit a light hat for a boy for spring or a warm winter one.

Children's hat with knitted ears for a boy: description and diagram

If you think that knitting a hat for a boy is difficult and impossible, then you are mistaken. The main thing is that there is a desire to please the baby with a beautiful and warm hat of an original design.

It is better to knit a hat on circular knitting needles. Then the finished hat will not have rough seams that could rub the child’s skin.

The patterns that will help you knit a unique hat are mostly simple. It is enough to have only basic knowledge of “knitting art”.

What should you pay attention to when choosing a model and yarn for a baby hat?

Buy yarn for knitting only from natural materials so that the child’s head does not sweat under the hat and does not cause discomfort.
The finished product should not squeeze the head, slide or bunch up unsightly.
If you knit a hat exclusively from wool, the baby will quickly refuse to wear it: such a hat will be very itchy. Therefore, choose wool with the addition of synthetic additives.
Knit a hat for summer from cotton, and for autumn and winter choose wool and wool blends.

They begin to knit a hat for the child after taking measurements. Read about what measurements you need to take and what yarn to choose.

Count how many loops there are in 1 cm. Only after this can you start knitting a hat according to the chosen pattern.

Boy's hat with ears

After 6-7 rows knitted with an elastic pattern, start knitting according to the pattern until the fabric reaches 12-14 cm.

We decorate the bottom: 2 purl stitches are knitted together. After 2 rows, the decrease is repeated in the purl track.

Ears knit like this: cast on 23 loops and knit a 5 cm ribbed pattern.

Forming corners: we make 2 decreases in knit stitches on both sides each time we knit a knit row. We knit the remaining 3 loops on the knitting needles together.

Lilac hat for a boy

Diagram and description of the children's hat “KILKENNY”

Boy's hat "Budenovka"

Hat "Budenovka"

Video: children's hat knitted

Video: knitting a hat for a boy

Knitted hat for a boy for spring and autumn: description and diagram

A hat for spring and autumn is knitted in one thread from the following types of yarn: cotton with acrylic, acrylic only, merino wool, alpaca and microfiber.

Hat knitted with a “Braid” pattern

To knit a headdress, take a 100 g skein of thread and circular knitting needles No. 4 and No. 4.5.
We cast on 108 stitches on needles No. 4 and close them with a ring. We constantly check that the loops are not twisted.
Mark with a marker or pin the loop from which the first row begins.
We knit 5 cm with an elastic pattern, alternating purl and knit stitches (2 through 2).
Next we change the knitting needles (take half a size larger).
We knit according to the following pattern: cast on 1 purl loop, add 1 knit stitch (pull it out from the broaches).
We knit another 15 knit stitches and 2 purl stitches. Again we add a loop, which is formed from broaches, and knit facial loops - 15 pcs.
Next rapport: cast on 2 purl stitches, add 16 stitches knitted in knit stitch. Repeat 3 times and complete the row with a purl loop. We got 90 loops.

Now let's start knitting the braid pattern. We will knit using the following diagram:

Scheme of the "Braids" pattern

Decrease stitches using double-edged needles.
When the “braid” pattern is knitted according to the pattern, cut the thread. Now you need to pull it through the loops.
We will make a pompom using threads and cardboard circles using the standard method. All that remains is to secure it to the top of the head.

You can make a hat using this pattern knit without ears.

For an older boy, it is better to knit a different model of hat.

Knitted winter hat for a boy: diagram

In winter, the main thing for a mother is that her child does not freeze or get sick. A hat knitted by mother's or grandmother's hands will be much warmer than one bought in a store, because only the best yarn is selected for it.

Alpaca and cashmere threads are suitable for a winter knitted hat. You can combine yarn with mohair and goat down. For a boy prone to allergies, buy bulk acrylic.

Cap with a Scandinavian pattern on a soft wool lining

We calculate the number of loops according to the volume of the head.
We knit 7 rows from the cast-on edge with a simple elastic band.
Add six stitches evenly and knit the main part of the hat using the stockinette stitch pattern.

After 5 rows of stockinette stitch, let's start knitting the Scandinavian pattern according to this scheme:

To make knitted patterns, take threads of the following colors:

on the lower triangles - burgundy yarn
for zigzags - white
for the upper triangles - bright blue yarn color

If after knitting the pattern you still want to decorate the hat, then make another drawing of the cat. His the diagram is shown in the figure:

After both the Scandinavian pattern and the cat are knitted, we will begin to evenly decrease six loops in each row.
We connect the back seam using a thread of the main color.
We tie the ears as shown in the photo: cast on 22 loops and knit 15 rows with an elastic band. At the same time, decrease 1 loop from each row.
All that remains is to knit the lining: we will make it like a hat, but without patterns.

Video: Double cap. Knitting

Knitted children's earflap hat for a boy: description and diagram

Schemes of suitable patterns:

Video: How to knit a hat with earflaps for a boy?

And here's the continuation:

Video: How to knit a hat with earflaps for a boy using 2 knitting needles?

Knitted hat for a teenage boy: diagram

A universal hat model knitted with a zigzag pattern. How to knit it - see diagram.

Hat pattern

Continuation of the scheme

Another variant Hats for teenage boys:

If you decide to knit a hat for a teenager, then take yarn in subdued colors. Gray, brown, black or blue will do.

Using the pattern suggested above, you can easily knit a fashionable hat. The pattern is simple. Even a beginner knitter can handle it.

Other suitable patterns:

Hat for a teenager, knitted with a mesh pattern

Knitted beanie hat for a boy: knitting pattern

Have you spent a long time choosing a suitable knitted hat for a boy and settled on a beanie hat? Watch the video for details on how to knit it.

Video: Knitting. Beanie hat.

Knitted stocking hat for a boy: description and diagram

The stocking cap is now a very popular youth model. How to tie it - watch the video.

Video: Knitting. Knitting a Stocking Hat with knitting needles

Knitted hat and helmet for a boy with a detailed description

To knit a hat-helmet for a boy, stock up on 100 g of yarn and knitting needles No. 3.5. Diagram and detailed description are presented below:

Another option hats:

Cap and helmet for a boy 2-3 years old

Hat-helmet. You can knit this hat for both a baby and a boy of 2-3 years old

Knitted children's minion hat for a boy: description and diagram

Both boys and girls like the Minion hat. Knitting it is not difficult if you are careful and repeat all the steps strictly according to the description.

The hat is crocheted. The main pattern is a double crochet. Here's the diagram:

To prevent the cap from taking the shape of a skullcap, after knitting the bottom up to 12 cm in diameter, increases should be repeated every other row.

We knit the bottom of the hat. We make a row without increments. We knit a row again with additional loops. The bottom acquires the desired diameter. Now you need to continue working to the desired depth without increments.

We knit the bottom (diameter 12cm)

After 10-11 rows we will make 2 rows with black yarn.

After the yellow rows and black, you need to knit 3 more rows with blue yarn.

Calculating the number of yellow rows

Add fabric to the desired height with blue yarn.

Middle of the back of the hat

The middle of the back of the hat is where the rows began and ended.

Determining where the ears will be

We fold the hat in half and determine the place where we will knit the ears of the hat: it is located at a distance of 15 loops from the seam.

The outline of the cap is tied with a single crochet. The ties are 6 pieces of 100 cm each for one ear. For 2 ears - 12 pieces.

We tie the outline of the cap with a single crochet.

The ties are 6 pieces of 100 cm each for one ear. For 2 ears - 12 pieces.

Fold two pieces in half

Fold two pieces of the same color in half at once. We insert the loop into the outermost loop of the middle of the ear.

We pull the ends of the segments through the loop. We repeat the same action with the remaining segments.

Eye glasses: diagram

For knitting the 1st row, use a brown thread.
To knit 2 rows you will need white yarn. Knit in the back half loop.
For row 3, white yarn is used.
The black stripe is a guide for sewing on the eyes.

How to knit eyes

You can knit this hat literally in the evening. If you need something unusual and simple for your son or granddaughter, then knit a light hat for autumn or spring. The pattern consists of knit and purl stitches, which are combined in different ways.

Instructions for the hat are given for sizes 46-48. For knitting you will need 80 g of 100% merino wool and knitting needles No. 4.

We cast on 74 loops. We close the loops in a circle and knit 5 rows with a simple elastic band, alternating 1 front and 1 purl loops.
We begin to knit a pattern of knit and purl stitches: after the elastic, we knit a row of knit stitches.
We knit the second row after the elastic using purl stitches.
Next we knit 5 rows with facial loops.
After this - a series of purl loops.
We knit the next row with facial loops.
Again we knit 4 rows with an elastic band, alternating 1 knit stitch and 1 purl stitch.
Repeat the pattern 2 more times.
We knit a row with facial loops and decrease 6 loops in a row.
There should be 20 loops left on the knitting needles, which need to be tied together with thread.

Below are ideas for original knitted hats for boys:

Gray hat for a boy with thermal “car” stickers

For the hat you will need three colors of yarn and thermal stickers. The stripe on the cap is the road. The automotive theme is complemented by cars.

You can choose other stickers: cartoon characters, or robots. The strip can be knitted with brown or yellow yarn, then the strip will imitate a path. The hat is knitted using regular stockinette stitch.

Knitting pattern for a hat:

Knitted hat and scarf for a boy: diagram

Gray hat and scarf with snowflake

Scheme "Snowflakes"

Balaclava hat: diagram with description

How to knit a balaclava hat is described in detail

Children's hat with ties: diagram

If you want to knit a boy's hat with ties, watch the following video.

Video: how to knit a hat for a baby?

Children's hat with visor with ties

We start knitting in garter stitch from the middle strip: this is a strip running from the forehead to the neck.
Add loops along the edges, knitting squares, while simultaneously removing two loops along the diagonal.
How to knit squares? We cast on the required number of loops and decrease in the middle, removing two unknitted loops at a time: we cast on 1 knit loop and throw two over the knitted one.
We decrease in each row until we knit a square.
We decorate the bottom of the hat with an elastic band.
We knit the visor and strings separately and sew them to the finished hat. The visor is knitted in double stitch, starting from the front edge.
You can knit such a hat in one piece so that you don’t have to sew on the parts separately.