Modern styles of children's dresses: examples of each style. Do-it-yourself elegant dress for a girl: patterns and knitting patterns Ready-made pattern for a children's dress for 10 years

Some special event or even just a birthday.

I want a holiday and guests.

What if this holiday is intended for a little girl?
I want a double holiday!
I want everything to be perfect and flawless.
I want to organize an event on a grand scale.
Or not even on a grand scale, but you just want to give your child a holiday.
But what to do when the prices for elegant dresses are just off the charts?
I suggest sewing a festive elegant dress for a girl yourself.
It will be better than any store-bought dresses!
If you know how to sew or you have a great desire to learn, then you can do it!
Sewing such a dress is very easy and quick, especially since the pattern is provided free of charge.

Dress pattern:

Using this pattern you can sew not just one festive dress for a girl, but three of them:

True, in order to cut out models No. 1 and 2, you need to model the pattern a little.
Model No. 1
This dress can be combined from two fabrics - checkered and striped. The skirt is flared, with a yoke. The bodice consists of two parts. This dress has a bob neckline. Puff sleeve with a narrow cuff at the bottom.
Model No. 2
This summer dress for a girl is made of patterned fabric and trimmed with lace and plain fabric. There are small pleats at the front. The dress will look very good with a belt.
Model No. 3
The highlight of this dress are the wings sewn into the relief line. The dress fastens at the front with buttons. There are tuck folds on the shelf. The skirt is flared at the bottom, the top of which is gathered. This dress looks very good with a belt.
The pattern of this dress is designed for size 34, with a height of 134 cm (without seam allowances).
Fabric consumption for a dress: 1 m 55 cm, with a fabric width of 106 cm.
When choosing the style of a children's dress, you need to remember that you can choose the simplest model, but put all the emphasis on the choice of details (braid, lace, fabric, bows, etc.).

Every girl at least once in her life dreams, just like the heroine of her favorite fairy tale “Cinderella,” to be at a real ball. And not only to appear, but also to look like a fairy-tale princess at this ball: in a beautiful dress, with an intricate hairstyle, elegant shoes, and light makeup. And even if your fashionista can only wear this dress once, still give your child a fairy tale, and your princess will remember such a miracle transformation for a long time. Our dress pattern for girls will help you turn your beauty not only into a princess. By changing the length of the skirt, the color of the fabric and its texture, it can easily be transformed into an airy snowflake, a mysterious flower fairy, and even a Spanish gypsy beauty. Fluffy multi-layered skirts will help you create both an airy tutu and an exquisite ballet Chopin dress. This basic pattern will help you create completely different looks.

Show a little more imagination with ruffles, rhinestones, and bows. Add elbow-length gloves, a miniature clutch bag, and make a tiara.

Patterns replaced (July 2016)

You can download a dress pattern for a girl for free using the following links:

* As a result of payment, you will automatically be sent a file with a pattern to the email you specified. If the file has not arrived, you need to check whether you entered the correct postal address when paying. If the postal address is correct, but the file has not arrived, you must immediately contact the address [email protected]

Patterns are given without seam allowances

The composition of the pattern set:

note The skirt consists of several layers. The bottom one is fabric that holds its shape, the top ones are soft organza or chiffon.

A variety of dress fabrics at an affordable price can be purchased in the VITEX online store.

Below is a description of sewing an elegant christening dress from one of our readers.

I originally planned to make a beautiful dress for my niece that she could wear to her christening and a couple of other holidays. I liked this model for its simplicity and the ability to choose a pattern for the desired size. My niece has already slightly outgrown 92, but does not reach 98 cm (the girl is 2.5 years old). I decided to sew a little longer and chose a 98 cm pattern. As it turned out later, I did the right thing, because it fit with difficulty. I printed and cut out the patterns, for sewing I chose white chintz as the main fabric and lace as the additional upper tier of the skirt. I bought 2.5 meters of lace braid, three flower bows and 2 meters of thin braid with rhinestones. Although the pattern came with sleeves and I even cut them out, I did not sew them in. I decided that this dress would look nicer without them. I made double patterns for the body up to the waist so that the chintz would not show through and would look neater. Then I sewed all the details in them, I got patterns up to the waist in two copies. I sewed the necklines, head slits and turned the product right side out. After that, I stitched from the front side of the armhole, first folding the ends and running thin lace along the seams so that they were not noticeable. The top of the product was almost ready. I would like to note that I cut exactly according to the patterns at 98 cm, and did not make additional seam allowances. And then, when the dress was ready, it fit snugly. Therefore, if you are sewing exactly to your size, then add additional allowances so that the girl fits well. You can also slightly enlarge the neckline, sew a zipper at the back or add small buttons. In order for the child’s head to pass through without problems, it is necessary that the two halves of the back are sewn together only at the very bottom and leave a deep cut. I got a little stuck on this and had to embroider it twice, making more.
Afterwards, I started cutting out the bottom, only I decided to make the top lace layer of the skirt more fluffy and therefore did not cut it like the bottom one, but simply gathered it together and stitched it in place. I cut the bottom layer exactly according to the finished pattern. It turned out very elegant and the length was just right. I trimmed the bottom of the top lace layer with rhinestone braid. So that the threads would not be conspicuous, I sharpened them with a very thin fishing line. It was transparent and unnoticeable. I trimmed the bottom layer of the dress with lace. Then I connected the top and bottom of the dress from the inside out and machined all the edges. I wanted the bottom of the dress to somehow sparkle - for this I lightly grabbed it in an accordion and lifted the ends of the skirt in front on both sides. I sewed a white flower into the gripping areas and another one on the left chest. To make the dress look even more elegant, I bought a very wide transparent mesh ribbon with large flowers embroidered with white braid. I sewed it at the waist to the outside of the dress using hand stitches with clear thin fishing line. Due to its large size, it turned out that the top of the braid was under the bust, and the bottom went over the lace skirt. But it looked good. On the back of the slit I sewed a small button and made an air loop from white threads. But since, as I already wrote, the cut had to be lengthened, at least three buttons were needed. I finished them off later. This is where my work with the dress ended - it turned out very airy and beautiful.

In any children's store you will find a lot of dresses for little fashionistas, be it festive or knitted. Leading fashion houses also do not deprive their youngest clients of attention. But quite often, children's things cost so much that the mother will think three hundred times before taking out her wallet. Do you want to dress up a child or teenager, but finances don’t allow it? You can do a lot yourself if you try hard enough. Where can I get patterns for children's dresses for beginners? Making simple patterns with your own hands is not difficult at all and is free; we will now talk about some of the methods.

Not everyone knows about this, but to sew a dress for a girl, a pattern is not at all necessary! Without a pattern you can sew:

• folk style outfit;
• ball gown;
• summer sundress.

Are you wondering where to start? Let's do the sundress then - it's the easiest thing. But first you need to take some measurements - it's best to write them down if you are not going to limit yourself to just one product.

Measure:

• the growth of your little daughter;
• chest girth;
• waist circumference;
• hip girth;
• shoulder length;
• sleeve length (you won’t need it for a sundress, but if you’ve already taken measurements, it’s useful to do everything at once);
• expected length of the product.

Important! For a sundress with straps, measure the length of the product from the armpit to the expected hemline.

Choosing fabric

In general, sewing for small children is a pleasure. The seams are short, little fabric is needed, no darts or complex details. The simpler the style, the better. It is enough to choose a beautiful fabric, and even the most basic, but neatly sewn dress will look like a princess.

Important! You can also use scraps left over from your mother’s new dress, or alter something of your own for your daughter – good, but already boring.

If you are choosing a material for a summer sundress, it is better to choose one that drapes well:

• crepe de Chine;
• chiffon;
• thin chintz;
• satin;
• poplin;
• gauze.

Important! Chintz fits just perfectly - inexpensive, very hygienic, bright, suitable for a New Year's dress. And it’s okay that it fades quickly - anyway, by next summer my daughter will outgrow this dress.

Also, to sew a light children's dress with your own hands, you need:

• linen elastic;
• braid to match the fabric - for straps and edging.

We sew a sundress

Perhaps this model with elastic and straps is the simplest DIY dress for a girl. If you are sewing it from an opaque fabric, it will be a single layer. It is better to fold the gauze in two layers or make a cover. Below are photo sketches.

Operating procedure:

1. Spread the fabric in one layer with the wrong side up.
2. Draw a top line perpendicular to the edges.
3. From this line, set down the length of the product, plus allowances for the drawstring at the top and for processing the bottom - you can immediately mark the lines of the drawstring.
4. Through this mark, draw another perpendicular to the edges.
5. Along the line that runs along the lobar, set aside a segment equal to the circumference of the chest, multiplied by 1.5 or 2 (depending on how well the fabric drapes: if it is gauze, it is better to make lush gathers, if chintz or satin - more modest ).
6. Cut out the part.

Assembling a sundress

How to sew a children's dress with your own hands? Very simple. This model has only one seam, plus bottom processing, plus a drawstring:

1. Start with the drawstring - iron the top edge to the wrong side, then bend the fold 0.5 cm and stitch it all together (it’s better to make a decorative stitch on the front side).
2. Sew the back seam along the wrong side, leaving the area near the drawstring unsealed so that you can insert the elastic.
3. Insert the rubber band.
4. Try the blank on your daughter.
5. Mark the places for the straps.
6. Cut 2 pieces of braid and sew on the straps.
7. Hem the bottom - hand hem or topstitch.
8. Along the hem you can sew the same braid from which the straps are made.

Important! The straps of this sundress can be tied.

Sundress on a yoke

If you need a dress for a girl, you can sew it yourself from two different fabrics. For example, take satin for the yoke, and crepe de chine for the bottom. But nothing prevents you from constructing a similar thing from the same material.

This summer dress with a yoke is also made like a sundress, only the straps are better made wide and from the same fabric as the yoke, and this model does not have a drawstring.

Important! It is better to cut out the yoke first on paper - it looks like a strip 5-6 cm wide and a length equal to the half-circumference of the chest. There will be 4 parts - two for the front and two for the back. These are the simple patterns of children's dresses for beginners that you can use.

Operating procedure:

1. Lay out the fabric lengthwise (you can use two layers at once).
2. Cut out 4 strips of the specified size from it (do not forget to add allowances for all cuts) - the grain thread coincides with the short side.
3. Cut out the hem - to do this, subtract the width of the yoke from the total length of the product (like the previous model, it is measured from the armpit to the bottom).
4. Cut out 2 straps - these are also strips 5-6 cm wide, but, unlike the yoke, when cutting, the grain thread coincides with the long side.

Straps

Start assembling this model by preparing the straps:

1. Fold the strips in half with right sides facing out.
2. Place the long seam allowances inside.
3. Iron them.
4. Topstitch the seam and topstitch the straps around the entire perimeter.

Yoke

To quickly sew a baby dress with your own hands, connect the yoke with the straps, and then sew on the bottom:

1. We sweep the strips in pairs: one for the outside, the other for the inside.
2. We sweep each one into a ring.
3. Let's try one of them on a model.
4. We mark out places for the straps - both on the part of the yoke that will be on the outside and on the part on the inside.
5. Carefully rip apart the basting and straighten the rings.
6. We fold the strips intended for the front part with the right sides facing each other.
7. We put straps between them.
8. Sew together the top seam.
9. We turn the yoke inside out so that the long parts of the straps should be on the front side.
10. Iron the seam.
11. We do the same with the back parts - after you stitch them, the straps should be sewn in.
12. We sew together the side seams of the yoke - the allowances should be on the inside.

Assembling a summer dress

Your yoke with straps is ready. All that remains is to stitch the hem, but first you need to prepare it:

1. Sew the back seam.
2. Press the seam allowances to the sides.
3. Sew along the line of stitching to the yoke with a basting stitch and make gathers.
4. Place the top edge of the main part between the yoke pieces and baste.
5. Sew the main part to the yoke.

The dress is almost ready, all that remains is to trim the bottom.

Dress according to pattern

You can sew a children's dress with your own hands using a pattern. Clothing for small children is also good because many things can be sewn using the same patterns. For example, on a T-shirt or tank top. To do this, it is not at all necessary to rip the thing apart - you can simply circle it. It's better to do this on paper first so you can model the cutout:

1. Trace the shirt.
2. For the back of a straight dress, simply extend the side lines down to the desired length.
3. For the shelf, also continue the lines down to the same length.
4. Find the middle of the cutout.
5. Draw a line down from this point.
6. Set aside 2 cm.
7. Connect this new point to the beginning of the shoulder seams.

1. Cut out 2 parts - front and back.
2. Cut out the facings for the neckline and armholes - just trace them first along the contour of the pattern, and then make a parallel outline at a distance of 2.5-3 cm (you need to outline by aligning the front side of the part with the back of the facing).
3. Sew the shoulder and side seams of the main parts, pressing the allowances to the sides.
4. Sew the neck pieces along the shoulder seams.
5. Press seam allowances.
6. Turn the main dress inside out.
7. Baste the facings so that their right sides are on the wrong side of the dress.
8. Sew facings along the cutouts.
9. Fold the free edges by 0.5 cm and stitch - preferably with a finishing stitch from the front side.
10. After that, all you have to do is trim the bottom.

DIY elegant dress for a girl

Are you thinking about how to dress up a princess for a matinee, but you have almost no time left? Nothing complicated. Now we’ll talk about how to sew a children’s dress with a full skirt - this is the best option, and you can make it in a couple of hours.

You will need:

• material for the top (if you have a beautiful swimsuit or bodysuit, it will be absolutely fine - the top can be made from these items);
• tulle or guipure for a skirt;
• wide elastic band for the belt;
• large compass;
• long ruler.

Top

The top is made in the same way as for a simple sleeveless dress - that is, the T-shirt is outlined, but only to the waist. The cutout is modeled.

If you are sewing a dress from a swimsuit, simply cut off the bottom part or turn the swimsuit into a bodysuit by cutting it between the legs and sewing an inconspicuous button there. Why do you need a clasp? Then, so that your little princess does not feel any inconvenience and does not rack her brains over what to do if the need arises to go to the toilet.

We start assembling from the top - we simply sew the parts together in the same way as when making any other clothing. You can immediately process the top and armholes, unless, of course, you are going to sew in a zipper.

Making a skirt

A circle skirt looks just perfect on a little girl. It can be floor-length or very short, in the style of a dude. You only need two measurements - waist circumference and the length of the skirt itself.

Important! What to sew from? A brilliant invention of designers - tulle. Keeps its shape perfectly - no need to starch. You can cut it however you like; it costs nothing to cut out several layers at once.

It’s better to make a template in advance:

1. Calculate the construction, the radius of the notch - divide the waist circumference by 6.28.
2. Draw a circle with this radius on a piece of paper.
3. Add the length of the product to the radius.
4. Draw a second circle from the same center - you will get a ring.
5. Cut out several layers of tulle - they can be the same, but you can make ruffles of different lengths.

Your next steps depend on what the top is made of:

• Materials such as supplex or jersey have excellent stretch, so you can simply sew the skirt first to the elastic, and then the entire structure. - to the bodice.
• If the material does not stretch so well, you cannot do without a zipper. It is best to sew it in the middle of the back, from the top to the skirt. In this case, the neckline is processed after the zipper takes its place.

Video material

In short, there are plenty of models for little girls from 2 months old, and many can be sewn using the most primitive patterns. The most important thing is to carefully handle all the details. The slightest carelessness on children's clothing is visible much more clearly than on adult clothing, and can significantly ruin the look.

There is no sweetness with these girls:

Before they have time to grow up, they demand outfits!

Every day there is excitement

Every day of care:

Oh, these young ladies!

Oh, these fashions!

In this article we tell you how to create a pattern for the base of a dress for a girl of younger and older age.

In this article we tell you how Make your own pattern for the base of a dress for a younger or older girl.

If you have a little fashionista, I mean a daughter or granddaughter, then you just need to master the technique of creating patterns for girls. Children grow out of clothes very quickly, and every time you want to update your children's wardrobe, you will have to create a new pattern. It may seem difficult the first time. But I assure you, the second, third time everything will be much easier. And the fifth time, starting to build, you will know all the calculations by heart. It's not difficult at all. Moreover, we offer STEP-BY-STEP instructions for constructing a pattern drawing. Line by line and the pattern is ready. It's simple.

Today we will learn how to build a pattern basics dresses. And later, on the basis of this foundation, we will master the modeling of different styles of children's clothing. It is very exciting! I don't even know who will enjoy it more. You - from the very process of creating a children's wardrobe, or your little “client”, receiving new outfits as a gift from you. In my opinion, this is a mutually beneficial cooperation. Moreover, the benefit, first of all, is the moral satisfaction of both parties. This is cool!

To make the correct pattern, you must have accurate measurements taken. If mistakes are made when taking measurements, the drawing will turn out to be inaccurate and the dress will not fit well on your figure.

Measurements are taken with a measuring tape, which is not loosened or pulled too tightly. The girl, dressed in light clothing or underwear, should stand without tension, in a normal position. A cord or thin belt is tied along the waist line.

When taking measurements, it is necessary to clarify the height of the shoulders. Shoulders can be high, normal or sloping. Everything is like adults.

The correct construction of the drawing largely depends on this measurement.

As an example, we will create a pattern for size 32. You take your young lady's measurements.

Dress for girls

To create a pattern drawing, you will need the following measurements:

On the left side of a sheet of paper,

Having stepped back 7 centimeters from the top cut, draw a vertical line on which to measure the length of the dress and put points A and H. Draw horizontal lines through points A and H to the right.

From point A to the right, set aside the measurement of the half-circumference of the chest plus 6 cm for a loose fit (for older girls, add 5 cm for a loose fit) and place point B.

AB = 32 + 6 = 38 cm.

From point B, lower the perpendicular until it intersects the bottom line. Designate the intersection point as H1.

From point A down, set aside the length of the back to the waist plus 1 cm (for older girls plus 0.5 cm) and place point T.

AT = 29 + 1 = 30 cm.

Draw a horizontal line through point T to the right. Designate the point of intersection with line BH1 as T1.

From point T down, set aside 1/2 of the back length measurement to the waist and place point B

29: 2= 14.5 cm

Through point B to the right, draw a horizontal line until it intersects with line BH1. Designate the intersection point as B1.

From point A to the right, set aside the back width measurement plus 1.5 cm and place point A1

14 + 1.5 = 15.5 cm

Armhole width.

From point A1 to the right, set aside ¼ of the half-chest measurement plus 1 cm (for older girls, plus 0.5 cm) and place point A2.

A1A2 = 32: 4 + 1 =9 cm.

From points A1 and A2 down, draw vertical lines of arbitrary length.

From point A to the right, set aside 1/3 of the neck half-circumference measurement plus 0.5 cm and place point A3.

AA3 = 14: 3 + 0.5 = 5.2 cm.

From point A3 upward, draw a perpendicular, on which set aside 1/10 of the neck half-girth measurement plus 0.8 cm and place point A4.

A3A4 = 14:10 + 0.8 = 2.2 cm.

Divide the angle at point A3 in half, from point A3 along the line dividing the angle, set aside 1/10 of the neck half-girth measurement minus 0.3 cm and place point A5.

A3A5 = 14: 10 - 0.3 = 1.1 cm.

Connect points A4, A5, A with a smooth concave line.

Back shoulder line.

From point A1 down, set aside 2.5 cm for normal shoulders (1.5 cm for high shoulders, 3.5 cm for sloping shoulders) and place point P. Connect points A4 and P with a straight line on which

remove the shoulder length measurement from point A4 plus 1.6 cm for the dart and place point P1.

A4P1 = 10.3 + 1.6 = 11.9 cm.

From point A4 to the right, set aside 3.5 - 4 cm and place point O. From point O down, draw a vertical line, on which set aside 6 cm and place point O1. From point O to the right, along line A4P1, set aside 1.6 cm and place point O2. Connect point O1 with a straight line to point O2, on which set aside the value of segment OO1 from point O1 and place point O3. This construction can be done using a compass (see Fig. 10).

By connecting points O3 and P1 with a straight line, we complete the design of the shoulder line.

From point P down, set aside 1/4 of the half-chest measurement plus 7cm and place point G

PG = 32: 4 + 7 = 15 cm.

Draw a horizontal line through point G to the left and right. Designate the point of intersection with the line AN as G1, the point of intersection with the line of the armhole width as G2, and with the line BH1 as G3.

Back armhole cut.

From point G up, set aside 1/3 of the distance PG + 2 cm and place point P2

GP2 = GP: 3 + 2 = 15: 3 + 2 = 7 cm.

Divide the angle at point G in half and along the line dividing the angle from point G, set aside 1/10 of the width of the armhole plus 1.5 cm and place point P3.

GP3 = 9: 10 + 1.5 = 2.4 cm.

Divide the width of the armhole GG2 in half and place point G4. Connect points P1, P2, P3, G4 with a smooth line. We get the back armhole line.

Front armhole cut.

From point G2 up, set aside 1/4 of the half-chest measurement plus 5 cm and place point P4.

G2P4 = 32: 4 + 5 = 13 cm.

From point P4 to the left, draw a horizontal line, on which set aside 1/10 of the half-chest measurement and place point P5.

32:10 = 3.2 cm.

From point G2 up, set aside 1/3 of the value of the segment G2 P4 and place point P6.

G2P6 = G2P4: 3 = 13: 3 = 4.3 cm.

Connect points P5 and P6 with a dotted line, divide it in half, set aside 0.8 - 1 cm from the division point to the right, and mark this point with the number 1. Divide the angle at point G2 in half. From point G2 along the angle dividing line, set aside 1/10 of the width of the armhole plus 0.8 cm and place point P7.

G2 P7 = 9: 10 + 0.8 = 1.7 cm.

Connect points P5, 1, P6, P7, G4 with a smooth line.

We have finished building the front armhole.

Shelf neck cut.

From point G3 up along line H1B, set aside 1/2 of the half-chest measurement plus 3.5 cm (for older girls, plus 2-2.5 cm) and place point B1.

G3B1 = 32: 2 + 3.5 = 19.5 cm.

From point G2 along line G2A2, set aside the value of the segment G3B1 and place point B2. Connect points B1 and B2.

From point B1 to the left, set aside 1/3 of the neck half-circumference measurement plus 0.5 cm and place point B3.

В1Вз = 14: 3 + 0.5 = 5.2 cm.

From point B1 down, set aside 1/3 of the neck half-circumference measurement plus 2 cm and place point B4.

B1B4 = 14: 3 + 2 = 6.7 cm.

Connect points B3 and B4 with a dotted line and divide it in half.

From point B1 through the division point, draw a line on which set aside 1/3 of the neck half-girth measurement plus 1 cm and place point B5

B1B5 = 14:3+1 =5.7 cm.

Connect points B3, B5, B4 with a smooth line. We get the line of the front neckline.

From point G3 to the left, set aside the measurement of the center of the chest plus 1 cm (for older girls, plus 0.5 cm) and place point G6.

Г3Г6 = 7+1=8 cm.

From point G6, draw a perpendicular to line B1B2, mark the intersection point as B6.

From point B6 downwards, set aside 1 - 1.5 cm and place point B7. Connect point B7 with a straight line to point B3 and a dotted line to point P5.

From point P5 to the right along the dotted line, set aside the measurement of the shoulder length minus the value of the segment B3B7, minus 0.3 cm and place point B8.

10.3 - 2.8 - 0.3 = 7.2 cm.

Connect points G6 and B8 with a straight line, along the continuation of which from point G6 set aside a value equal to the segment G6B7 and place point B9. Connect points B9 and P5 with a straight line.

(This construction can be done using a compass. From point G6, as from the center, draw an arc through point B3 to the left, until it intersects with a straight line and place point B9). Choose the option that is convenient for you.

Side seam line.

From point G to the right, set aside 1/3 of the width of the armhole and place point G5 (9:3 = 3cm).

From point G5, lower the perpendicular to the bottom line, mark the points of intersection with the lines of the waist, hips and bottom as T2, B2 and H2.

For determining general tuck solution along the waist line, add 2cm to the half-waist measurement, for older girls 1cm (28+2=30cm), then subtract this value from the width of the dress between points TT1 (38-30= 8cm).

The size of the front dart opening is equal to 0.25 of the total dart opening along the waist line (8x0.25=2cm), the side dart opening is 0.45 of the total dart opening (8x0.45=3.6cm),

rear 0.3 of the total solution (8x0.3 = 2.4 cm).

To calculate the dress along the hip line, add 3 cm to the hip half-girth measurement (for older girls, 2 cm) for a loose fit; from the resulting value, subtract the width of the dress obtained when constructing the drawing between points BB1 (38 + 3-38 = 3 cm).

Distribute the result equally between the shelf and the back (3:2 = 1.5 cm).

From point B2 to the left and right, set aside 1.5 cm and place points B3 and B4.

From point T2 to the left and right along the waist line, set aside half of the side dart solution (3.6: 2 = 1.8 cm) and place points T3 and T4.

Connect points T3 and T4 with straight lines to point G5 and extend the line up to the armhole line.

Connect points T3 B4 and T4 B3 with dotted lines, which you divide in half.

Set aside 0.5 cm from the division points to the left and right and connect them with smooth lines to points T3 and B4, and, accordingly, T4 and B3.

Front waist line.

From point T1, set aside 1.5 cm down and place point T5. Connect points T5 and T4 with a smooth curve.

From point B1, set aside 1.5 cm down and place point B5. Connect points B3 and B5 with a smooth curve.

Divide the distance between the points GG1 in half, designate the division point as G7. From point G7, lower the perpendicular to line BB1. Designate the intersection points with the waist and hip lines as T6 and B6, respectively. From point T6 to the left and right, set aside half of the back dart solution (2.4: 2 = 1.2 cm) and place points T7 and T8. From point B6 up, set aside 3 cm. Connect the resulting points.

Design of the dart on shelf.

From point G6 down, draw a vertical line until it intersects with line B3B5. Mark the intersection points with the waist and hips as T9 and B7, respectively. From point T9 to the left and right, set aside half of the front dart solution (2: 2 = 1cm) and place points T10 and T11. From point G6 down, and from point B7 up, set aside 4 cm and connect them with points T10 and T11.

Design of the side seam line.

Draw vertical lines from points B3 and B4 down, mark the points of intersection with the bottom line as H3 and H4. If the dress should be widened, then set aside 3-5 cm from points H3 and H4 to the left and right and connect them with straight lines to points B3 and B4.

From H1, set aside 1.5 cm down and mark point H5. Connect points H5 and H3 (and in the extended version, the lower point of the side seam 3) with a smooth curve. If the dress is widened towards the bottom, it is necessary to adjust the bottom line of the back. From point H downwards, set aside 1-1.5 cm, place point H6 and connect it with a smooth curve to the lower point of the side seam of the back 3.

All. Pattern construction is complete

Remind you, that this is a dry drawing, a kind of frame from which a style of any complexity can be modeled. The simplest thing you can do yourself is a yoke on the bodice, or cut the dress along the waistline and gather the lower part of the dress (skirt), or make a frill along the bottom of the dress, etc.

In the next issue we will build

In subsequent issues we will learn how to model, and then we will begin to master sewing technology.

I wish you all creative inspiration!

Every mother wants her beloved daughter to be the most beautiful and look like a princess. Any image can be brought to life thanks to a dress. But sometimes children's clothing costs much more than adult clothing. Therefore, the most profitable solution would be to sew a dress with your own hands.

This will, of course, take more time than shopping, but it will save a lot of money, and mom will be much more pleased if the dress she made becomes her daughter’s favorite. You can create absolutely anything at your discretion. In the article, anyone will find interesting information on how to sew the most common types of outfits; each dress pattern is also described in detail. It will be a good example for a girl to see her mother doing needlework. And if the child is six years old and above, then he will be happy to help you.

A simple pattern for a simple dress for a girl

If you decide to start sewing for the first time, you should start with the simplest things. The version of the dress, or even a sundress, proposed below, was created specifically for beginners, and you can show your imagination by choosing an interesting fabric or decorating the product with homemade bows or flowers. This dress is made of two main parts - front and back.

The dress should be loose and light so that the child can walk comfortably in it. Therefore, the main measurement will be the volume of the hips, but you can add some extra if you want to make the dress looser.

However, if you do not have large supplies of fabric, then take only as much as you need.

As mentioned above, the sundress consists of two parts, for each of them you need to take half measurements. When drawing a pattern, you should note the length of the armhole. It should be approximately 9-12 cm. It all depends on the child’s height and his physique. The dress pattern for the girl is ready, the main thing is to take the measurements correctly. After you have drawn the pattern, transfer it to the fabric, not forgetting about the allowances on all cuts. All that remains is to cut and stitch.

We sew a New Year's dress

Now let's move on to a more complex type of dress - this is a New Year's suit. In this outfit, your daughter can be a snowflake or a fairy. If you already have suitable fabric at home, then it can be sewn in one day, especially considering that the pattern for the girl’s dress is made from a T-shirt. The fabric can be any at your discretion, but it is advisable to take satin for the upper part (you will also need it for the very bottom layer of the skirt), and organza for the skirt.

Simple patterns from a T-shirt

To do this, you will need an unnecessary T-shirt or tank top that is the right size for the girl. The T-shirt should not be ripped open, but simply cut along the seams, starting with the sleeves, and then along the shoulder and side seams.

If your intended dress is without sleeves, then cut them off and leave two halves (front and back) without them. If you want a dress with sleeves, then leave the halves as they are.

It remains a difficult task to take measurements of the child:

1. To start, measure from your shoulder to your waist, this will be the length of your top.
2. Next - from the waist to the expected length of the outfit. To make it easier to measure, loosely tie a rope around the girl’s waist.
3. The measurements should be taken to the front of the T-shirt. Draw a new line using a slightly convex line. Keeping the seam allowance in mind, cut along it.
4. Place the part you just cut to the back of the T-shirt and draw the bottom cut with chalk. Also cut along the new line.

There is no need to make patterns for the skirt.

Now the dress pattern for the girl for the holiday is ready.

Cut out the dresses

Let's start by cutting out the skirt. To do this, you need to cut a strip 2.5-3 m long and 0.5 m wide from the fabric you chose for the top of the dress, for example, satin (0.5 m will be the length of the skirt). After that, do the same, only using the fabric you chose for the skirt. For example, from organza.

Next we start cutting out the top part. To begin, take the ready-made patterns for the front and back, attach them side by side and outline them on the wrong side of the fabric with a simple pencil. To sew in the fastener, fold the cut out back lengthwise and cut the fabric down 10 cm in the middle.

All that remains is to cut out the belt. It is enough to cut a ribbon 20 cm wide from the remnants of organza. Additional elements: a belt, a bow, a flower - it is convenient to make from remnants and scraps of fabric, since they are completely free. Don’t throw away dress patterns for girls, because with their help in the future you can sew more than one outfit, differing only in color or material.

Sewing a dress

1. We start by processing the cut for the fastener. It needs to be sewn up with edging tape or a double strip.
2. Afterwards you will need to stitch and overcast the shoulder sections. Don't forget to iron them to the front.
3. Next we go in order, we need to edge the armhole sections.
4. Let's move on to the skirt. Connect the 2 strips made from different fabrics, stitch, overcast and, of course, iron them.
5. Afterwards, one of the sections of the future skirt should be stitched, both from the first fabric and from the second.
6. Having previously made it on the machine so that the top thread loops, we begin to connect your two skirts. Turn the already closed strips right side out. Place one closed side into the other. Sections that remain unprocessed should be pinned together. Stitch them.
7. The matter remains small. You need to pull the loose ends of the threads together. The assemblies should be distributed equally. Remember that the length of the cut of the skirt should be equal to the length of the cut of the top of the dress.
8. Finally, you need to connect the top to the skirt. The skirt should be on the wrong side, and the top of the dress should be on the front. When joining, the top should be slightly inside the skirt. The upper part can be decorated with lace.
9. Process the belt and attach a flower to it.

Now the dress for the New Year is ready.

We sew a fluffy evening dress

Finally, all that remains is to make a dress, which, when tried on, the girl will be delighted with for a long time. It should be remembered that, as elsewhere, the pattern of a ball gown for a girl is the main component in sewing an outfit. If you do it right, and even choose beautiful fabrics, the baby will feel like just a princess. What girl doesn’t dream of visiting a fairy tale?

The most difficult task is to choose the style, fabric and color of the future dress. When choosing a material, you need to pay attention to the fact that the fabric does not prick, but is soft and pleasant to the touch. If you are going to sew an outfit for a school-age girl, then beads and rhinestones are appropriate, and if the child is still very small, then you should not sew on any decorations smaller than a bow or a flower, as he can tear them off and start tasting them.

After the final choice of color and style, we begin to sew directly. When sewing this dress, as in the case of the previous one, you can make your work much easier by making sure that the pattern for a girl’s ball gown is made from her own T-shirt. Thus, the top will be almost ready.

Simple full skirt

In fact, the pattern of a fluffy dress for a girl is no more difficult than a regular one. The main question is how to sew a full skirt. In fact, everything is very simple. It is enough to cut out a rectangle four times the width of the girl’s hips. Adjust the length of the product at your discretion. And for the belt, you need to cut a strip from the fabric a meter wide, longer than the girl’s waist circumference, and about 10 cm long. The optimal length of the product is the one that reaches the middle of the shin. This way the girl will look festive, and at the same time nothing will bother her at the hem. The outfit must be tried on at any stage, even at the stage of patterning children's dresses. It will be difficult for girls to stand patiently every time mom needs to take measurements. Therefore, you can turn on her favorite cartoon and continue to work calmly.

Possible failures

Don't be upset if you didn't succeed in sewing the dress the first time. It is extremely difficult to make patterns for a girl, especially taking measurements. But if you continue to work and don’t focus on failures, then eventually you and your beauty will get the dress of your dreams. The main thing is to remember that patterning an elegant dress for a girl takes time and effort. Usually, if you rush too much, the product turns out sloppy and careless.

Do not think that the dress you sew will not be useful anywhere else. Even if your child never wears it again, it will be a great template for making other outfits. Using this example, it will be much easier to sew a new product in the future, especially since you already have experience. And your daughter will only be happy with a new beautiful dress.

Remember the main thing

I would like to remind you that you are sewing the outfit for your girl, and not for yourself. Therefore, do not forget to listen to the wishes of the child, whatever they may be. After all, it is he who wears the dress, not you. And if the girl doesn’t like it, then her mood will be spoiled, and your efforts will be in vain.

In conclusion, I would like to say: do not be afraid to experiment and try something new. Patterning an elegant dress for a girl is not as difficult a job as it seems. The main thing is to adhere to accurate measurements and know how to use a sewing machine. For the rest, rely only on your imagination.