The diagram for assembling an apple from three-dimensional modules. How to make a voluminous apple from colored paper: step-by-step photos. Stages of making a voluminous apple
Such modular "Orange" can be made in different versions - as a souvenir on a plate, or as a Christmas tree toy. Orange is assembled from 190 orange modules and 10 green ones.
Modular origami: "Orange" description of work:
1. Take 3 orange modules and arrange them as shown in the photo. Connect the modules together.
2. Assemble 3 rows of 19 modules each and close them into a ring.
3. Turn the ring out, lifting all the outer corners up at the same time.
4. Continue putting on rows of 19 modules each, placing the modules with the long sides facing out. The whole figure consists of ten rows. Start forming a ball from about the fifth row. Using your fingers from the inside, give the workpiece the desired shape. The modules of the last rows should converge closer and closer to the center. You can press the workpiece from above to flatten it.
5. Bend the wire for the loop as shown in the photo. You can use a paper clip for this purpose, trimming its ends a little.
b. Remove the 2 opposite modules of the last row. Place the loop in their place and insert the modules back. Thread a ribbon into the resulting loop.
7. Let's make leaves. To do this, unfold 2 green modules and lubricate the valves of one of them with glue.
8. Insert the glue-coated flaps of one module into the pocket of the second module.
9. Glue the valves of the second module on the back side.
10 . The junction of the modules will become the central vein of the leaf. Screw the corners onto the stick on either side of the central vein.
11. Squeeze the leaf a little from the back, forming the desired outline. The part bent in the photo will serve to attach the leaf to the orange.
12. Make five leaves and attach them to the orange, inserting the indicated parts into the spaces between the modules of the last row.
Note! An apple can be made in the same way as an orange, choosing combinations of any suitable colors. Make a leg from wire wrapped in paper.
Materials used from the book "Funny Figures. Modular Origami". Author Tatyana Prosnyakova.
Origami apple is one of the most popular paper origami. If you don’t know how to make an origami apple, then on this page you will find everything you need to assemble this simple paper figurine.
In the first photo you can see what you will get if you follow the assembly diagram below. The second photo of an origami apple was taken by one of our site users. It's not really origami, however, this apple is indeed made of paper. If you have photos of origami you have collected, send them to: This email address is being protected from spambots. You must have JavaScript enabled to view it.
Assembly diagram
Below is a diagram of how to assemble an origami apple from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then assembling the origami apple will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make an origami apple quickly and without looking at the diagram.
Video master class
Assembling an origami apple may seem like a daunting task for beginners. Therefore, we advise you to enter the query “origami apple video” on the largest video hosting site on the Internet, YouTube. There you will find many different videos about origami apples, which clearly show the steps to assemble an apple. We hope that after watching the video of the assembly master class, you will have no more questions about how to make an origami apple.
Here is an origami video on assembling an apple of a more complex design:
Symbolism
Traditionally, the apple is a symbol of life. In the biblical tradition, it is considered an attribute of paradise before the Fall and, because of this, acts as a symbol of joy, but also personifies temptation. Previously, it was even believed that offering an apple meant making a declaration of love.
I would like to somehow diversify the atmosphere in my home, without special expenses. How to do it? Any interior will become cozier and more original if it is supplemented with homemade products. In this case, all kinds of handmade techniques come to our aid. These can easily include modular origami. Using this technique you can create crafts on any theme for any interior. Let's try to decorate the kitchen with these apples. Together with you we will make one apple. Having mastered its implementation, you can do the rest yourself, slightly changing the coloring.
For work we will need the following materials:
- 7 sheets of orange paper;
- 5 sheets of yellow paper;
- a small piece of brown paper (twig);
- and a small piece of green paper (leaf);
- glue stick;
- stationery knife or scissors.
Let's get started
We produce 16 modules from one A4 sheet. We first cut the sheet into 16 equal parts. From each we make a module (look at the photos): 1 - the basis for the module; 2 – fold in half lengthwise; 3 – fold in half across, unbend; 4 – fold in the shape of an airplane to the fold line; 5 – turn over to the other side; 6 – bend the lower corners; 7 – bend the lower parts; 8 – bend it in half with the pockets facing out. Ready module.
For this apple, you need to make 112 orange and 76 yellow modules.
The first and second rows - 10 orange modules each.
We take the outer corners and press in the middle, turning the workpiece inside out. This must be done carefully, holding the workpiece on all sides.
Third row. We add 5 modules evenly, for a total of 15 modules. Of these, 5 are yellow and 10 are orange. We add as follows: on each corner of one module of the second row we put one module of the third row with one pocket, the second remains empty.
Fourth row. We evenly add 3 more modules. Total: 7 yellow, 11 orange. Place modules of each color on top of modules of the same color in the previous row.
Fifth row. We add 3 more modules. Total: 9 yellow, 12 orange.
Sixth row. We continue to add modules, 3 more. By adding little by little, our apple smoothly expands upward. Total: 11 yellow, 13 orange.
Seventh row. 12 yellow, 12 orange modules.
Eighth row. Evenly reduce by 5 modules. Total: 10 yellow, 9 orange modules.
Ninth row. 9 yellow, 10 orange modules.
Tenth row. Evenly reduce by 5 modules. Total: 6 yellow, 8 orange.
Eleventh row. 7 yellow, 7 orange.
The apple is almost ready. All that was left was a twig and a leaf. Cut out a rectangular strip of about 6 by 4 cm from brown paper. Lubricate it on one side with glue. Roll it into a narrow tube. 
This will be the twig. While the tube is damp from glue, it can be slightly bent to give it a more lively shape.
We insert the twig into the hole at the top of the apple between the modules.
We make a leaf from a piece of green paper (5 by 3 cm): bend the sheet of paper in half lengthwise, draw half of the leaf so that the middle of the leaf falls on the fold line. Cut it out. Without straightening, fold it like an accordion. We unfold it - we get a leaf with veins. Glue it to the branch using a glue stick.
The model origami apple is ready.
We present to your attention a master class on making an apple using the modular origami technique with your own hands. To create such a craft, you will need patience, because assembling and gluing all its edges will take you about an hour. And step-by-step instructions with a diagram and templates will tell you how to make an origami apple out of paper correctly.
Tools and materials Time: 1 hour Difficulty: 6/10
- 2 sheets of colored double-sided paper with a density of 300 g/m2;
- Printer;
- scissors;
- stationery knife;
- cutting mat;
- ruler;
- double-sided tape/foam tape.
Step-by-step instructions with photos
Decorate a children's party or themed party with stunning paper apples made by you yourself! Undoubtedly, they will add a touch of fairy tale to your holiday! It will take you about 1 hour to cut, fold and glue the origami apple. The finished craft measures approximately 11 cm in height, width and depth at its widest point.
Step 1: Cut out the template
Download the templates provided below.
Apple template for paper cutting
Print five pieces from the template onto thick paper and cut them out carefully along a solid line.
Step 2: Make the folds
To do this, take a ruler and place it on one of the dotted lines on one edge of the workpiece. Fold the paper up and smooth the fold with your finger. Then move the ruler to the next dotted line.
Working in this mode, fold the paper up on all 5 templates along their dotted lines.
Step 3: Pick the Apple
Next, you need to use foam or regular tape to glue all 5 parts according to their serial numbers. Parts with triangular protrusions must be glued into parts with flat edges. The floppy disk icon indicates where to stick the tape.
Start with number 1 and stick number 1 on template B to number 1 on template A (as indicated in the diagram).
It is important that the edges are glued strictly in order (1,2,3) and with the transition from template A to template B, from B to C, from C to D and from D to E. You need to start with part A.
As you work, be sure to observe the outside of the apple model and make sure that its edges fit neatly and evenly to each other. You may notice that the paper pieces are shaped as if you were gluing an apple peel in a circle.
Step 4: Take a cutting
After you collect the origami apple, all you have to do is make the cutting. To do this, glue part No. 49 of template E (indicated by arrows) into a tetrahedron. After that, insert it into the hole on the apple so that it looks like an apple stem.
Be careful not to overdo it, otherwise the cutting will go too deep inside and you will have to remove it with tweezers or make a new one.
To create an orange you will need
190 orange modules and 10 green.
Advice
Just like an orange, you can make an apple by choosing combinations of any suitable colors. The leg can be made from wire wrapped in paper.
1. Take 3 orange modules and arrange them as shown in the photo. Connect the modules together.
2. Assemble three rows of 19 modules each and close them into a ring.
3. Turn the ring out, lifting all the outer corners up at the same time.
4. Continue putting on rows of 19 modules each, placing the modules with the long sides facing out. The whole figure consists of ten rows. From about the fifth row, pay attention to forming a ball. Using your fingers from the inside, give the workpiece the desired shape. The modules of the last rows should converge closer and closer to the center. You can press the workpiece from above to flatten it.
5. Bend the wire for the loop as shown in the photo. You can use a paper clip for this purpose, trimming its ends a little.
6. Remove the 2 opposing modules of the last row. Put the loop in their place and insert the modules back. Thread a ribbon into the resulting loop.
7. Let's make leaves. To do this, unfold 2 green modules and lubricate the valves of one of them with glue.
8. Insert the glue-coated flaps of one module into the pocket of the second module.
9. Glue the valves of the second module on the back side.
10. The junction of the modules will become the central vein of the sheet. Screw the corners onto the stick on either side of the central vein.
11. Squeeze the leaf a little from the back, forming the desired outline. The part bent in the photo will serve to attach the leaf to the orange.
12. Make five leaves and attach them to the orange, inserting the indicated parts into the spaces between the modules of the last row.
