Knitted slippers with knitting needles in two colors. Knitting traces: models with descriptions. Warm slippers: diagrams

Every person dreams of home comfort and coziness. In general, the entire environment in the house contributes to this. Comfortable house slippers also play an important role. To provide yourself and your loved ones with real convenience, it is recommended to tie them with your own hands. On the one hand, this is a reason to have a good time, because, as you know, this type of needlework has a calming effect. On the other hand, this is quite simple to do. Step-by-step instructions for beginners with photos will help you achieve your plans.

Required materials and tools

The main tool for knitting slippers is knitting needles. The density of the future product depends on their thickness. For example, if you plan to knit lace slippers, thick knitting needles will come in handy. For warm and durable stitches, thin knitting needles are required. They can be connected with fishing line or without it.

Yarn is used as the material for knitting slippers. It is important that it is durable, does not fade, does not wear out, and is pleasant to the touch. Otherwise, it will not be possible to create a high quality product. The most suitable yarn is with the addition of synthetic threads. If you choose pure wool, the slippers will be prickly and slippery.

Additional tools and materials - scissors, needle, measuring tape, hook.

House slippers size

There are different patterns for knitting house slippers, and the choice of size depends on this. If you make a product in the form of footwear, measurements are taken in the same way as when knitting regular socks. In this case, you can use the data from the table.

In other cases, when a thick sole or insole is used for slippers, the size is determined as the shoe size.

Step-by-step instructions for knitting baby slippers

You can knit slippers for every family member, from a newborn to grandparents. This master class presents a female version of footwear, which is also suitable for a girl. The main thing is to choose the right size. You will need a green thread of two shades: dark and light.

Below is a step-by-step instruction for beginners with photos and descriptions, following which you can knit slippers:

You need to start by calculating the loops. They will need to be cast on with 31 dark green threads.
You need to knit 2 rows with single crochet stitches. The result will be a garter stitch. After this, you should attach a thread of a light shade and make 2 similar rows. Then knit 2 rows again in garter stitch using a dark thread.
Next, you need to knit a row with a light green thread in this way: 1 loop is knitted, 1 is removed. Such alternations must be done until the middle of the row (up to 16 loops).
From the middle of the canvas you need to make a shell. To do this, knit 1 knit, yarn over, 1 knit, yarn over, and so on until 9 stitches are obtained. The remaining half of the row is knitted similarly to the first.
The next row continues knitting as in point 3 (until the middle of the row). Then 1 loop is removed, 1 is knitted until the row ends.
The next row should be knitted like this: the loops that are knitted should be knitted, and those that are removed should be removed again. In this case, the thread is in front of the loop. The shell itself is made using single crochet stitches.
Next, 2 rows need to be knitted with facial loops using a dark thread.
The following rows are repeated until the required number of shells is obtained. In this example there are five of them. Don’t forget that the center will be different in each row, since you are adding yarn overs. Thus, after the fifth element there will be 71 loops on the knitting needles.
When all the shells are ready, you need to knit 2 rows using knitting needles using a dark-colored thread. Next, you will need to alternate 2 rows with different shades 4 times. All this is done with garter stitch.
The top of the slipper is ready, now with the same knitting needles you should start knitting the sole according to the “heel” principle. For its width, only 9 loops are enough. The sole is made with dark yarn. Considering that there are currently 71 stitches on the knitting needles, you must first knit 31 garter stitches, and the next 9 like this: 8 - knit stitches, 9 - together with 10 knit stitches.
After this, the product is turned around on the other side, the first loop is removed, 7 are the front loops, 9 and 10 are the purl loops.
Then the fabric from which the slippers will be created is again turned over to the other side and the steps are repeated until the loops on the sides are completed.
Now it's time to knit the back of the slipper with knitting needles. To do this, you will have to repeat the pattern of the side panel. The backdrop starts from the bottom of the product. In other words, you need to perform 2 rows with a dark thread, then 2 rows with a light thread, then again 2 rows with a dark thread, and so on. You need to proceed as follows: the first loop is removed, the remaining loops that are on the knitting needle are knitted, the last one is knitted together with the loop of the side row.
Then the canvas needs to be turned over to the other side. The first loop is removed, the rest are knitted to the end of the row, the last loop is knitted together with the side one.
Thus, knitting continues until the end, adhering to the pattern.
It turns out such an interesting backdrop, as in the photo.

The knitted slipper is almost ready. All that remains is to close the loops, trim the thread, and hide the ends. Now you can admire a product made by yourself.

In this master class, you can knit any slippers with knitting needles, just use a different color of yarn, a different pattern. There is no doubt about the quality if you carefully approach the choice of thread and the knitting process itself with full responsibility.

Video for beginners: how to knit slippers

Homemade slippers knitted by yourself cannot be compared with purchased products. In addition to the fact that they are original, you can completely create them to your own taste, use your favorite pattern, decorations, etc. Knitted slippers are comfortable and warm.

Below is a video tutorial for beginners. It will help you knit footprints that will always keep you warm.

It is not necessary to use garter stitch to make slippers with knitting needles. There are a huge number of patterns in which you can get confused. Some needlewomen prefer exclusively stocking stitch. According to them, such products look more attractive.

In the video you can see how to knit slippers with knitting needles in stocking stitch.

There is no need to be afraid of experiments. It will not be difficult for experienced needlewomen to come up with their own pattern and knit slippers, knowing the basic technique. Below in the video you can see a lesson on knitting women's leotards with embroidery.

Handmade slippers can not only warm up all family members. This is also a unique gift that will be a pleasant surprise for any hero of the occasion.

On two knitting needles, their types, knitting methods, manufacturing features, we will reveal the secrets of knitting slippers from experienced craftswomen.

What are slippers?

Classic slippers look like short socks; only the feet, heels and toes are covered. This type of indoor footwear is very popular, but despite this, slippers that are suitable in size, appearance, and color are difficult to find in the store. But if you have basic knitting skills, it won’t be difficult to make your own slippers with 2 knitting needles. The description is not difficult to understand.

Bound ones will be your best friend on cold winter evenings. They will warm your cold feet. Footprints made from thin, lightweight thread will allow your feet to “breathe” in the summer. Some women accept them not only as indoor shoes, but also as a beach option. Knit yourself slippers on 2 knitting needles. Even a beginner can handle the description of knitting summer slippers.

Features of knitting slippers

An excellent way to recycle the remains of different threads would be on 2 knitting needles. To make soft and cozy prints, you don’t need a lot of experience as a knitter.

There is a general scheme for the procedure for knitting slippers on knitting needles:

using wool yarn, cast on 43-47 stitches on knitting needles, knit four stripes with granny stitches - this is the edge of the product;
divide the loops on the knitting needles equally, highlight the middle loop;
knit the main part of the slipper, yarn over in front of the selected loop, knit it, yarn over again. When making slippers on 2 knitting needles in this way, it is not necessary to consult the description; you need to knit rows and periodically try them on on your feet.
After completing the main part, start knitting the sole.

Secrets from the masters

The fabric of the product can be knitted from individual motifs, but for beginners in needlework it is better to get their hands on it by making one-piece knitted slippers-footprints on 2 knitting needles. It is better to familiarize yourself with the description of the stages of work in advance.

You can decorate the tracks with decorative elements - flowers, rhinestones, ties, bows.
To become fashionable, you need to lengthen the slippers with an openwork top.
Experienced needlewomen recommend decorating the slippers with a knitted ribbon, which is made after knitting the sides, wraps around the ankle and is secured at the instep.

Slippers-sneakers with 2 knitting needles with description

It is quite difficult to knit them on two knitting needles, so let’s consider the manufacturing process on five.

150 g of thread.
Stocking needles No. 3.
Stocking needles No. 3.5.

The process of knitting sneakers

To make cuffs, cast on 56 stitches on a pair of needles number 3, dividing them into 4 needles (14 pieces each).

Tie ten ring rows with an elastic band 1 * 1.

There should be a strip of 4 stitches on the back half of the cuff and a strip of 2 stitches on the front of the cuff.

For the next 12 ring rows, continue knitting the front as before, and behind make 2 vertical stripes from purl stitches.

Heel execution.

Make one circular row, then change the threads from the first knitting needle to the fourth, then use only them. Turn the product over, in each row transfer the starting thread to another needle without knitting, perform 28 rows with granny loops, making vertical columns through the heel.

Heel turn.

transition thread, 9 knit stitches on the left, decrease the loop to the left, turn the product over;
transition thread, 9 knit stitches on the left, knit 2 purl threads at the same time, turn the work over;
transition thread, 9 knit stitches on the left, decrease to the left, unfold the product;

Continue knitting in this way until there are 12 stitches left in the work. Then make a circular row on these loops.

Using an empty knitting needle, cast on 15 stitches on the heel side and knit them.

Divide 12 heel stitches into two equal parts, distribute them on 4 and 1 knitting needles.

Knit with knit stitches on needles 1 and 4, and on needles 2 and 3 with an elastic band 1 * 1.

Decreases to form the toe are made at the end of 1 knitting needle and at the beginning of 4, in each row, until there are 14 loops left on each knitting needle.

Knitting a toe.

Decrease every other round until there are 8 stitches left on each needle. Then decrease the loops in each circular row. When there are 2 loops on the knitting needles, cut the thread and tighten.

Making straps for laces

Make strips in the upper half of the sock. To do this, pick up every second loop along the edge of the beginning of the elastic from the cuff to the toe.

Knit 4 rows with knit stitches.

Make a row for the holes: knit 2 knit stitches at the same time, yarn over, 2 knit stitches.

Additionally knit one purl row. Fasten the loops.

Making the soles of sneakers

Throw 7 loop-shaped threads onto 3.5 knitting needles.
8 facial.
Transition thread, 2 knit stitches, make 1 yarn over, 2 knit loops, make 1 yarn over, 3 knit stitches. At the end of the row there will be 10 stitches in the product.
Grandma's loop.
Grandma's loop.
Transition loop, knit 2, make 1 yarn over, knit 4 loops, make 1 yarn over, 3 knit stitches. At the end of the row there will be 12 stitches on the needles.
From 6 to 18 rows knit with facial loops.
Transition thread, 3 knit loops, make 1 yarn over, 4 knit loops, make 1 yarn over, 4 knit loops. At the end of the row there will be 14 stitches on the knitting needles.
From 20 to 33 rows knit with facial loops.
Transition loop, 3 knit stitches, make 1 yarn over, 6 knit stitches, make 1 yarn over, 4 knit stitches. Upon completion of the row, the product will have 16 loops.
Rows 35 to 48 are knitted with knit stitches.
1 transition thread, 3 knit stitches, make 1 yarn over, knit 8. loops, make 1 yarn over, 4 knit stitches. At the end of the row there will be 18 stitches in the work.
From 50 to 60 rub. knit with stockinette stitch.
1 transition loop, 3 knit stitches, make 1 yarn over, 10 knit loops, 1 yarn over, 4 knit stitches. When the row ends there will be 20 stitches in the work.
From 62 to 84 rows knit with facial loops.
Transition loop, knit 2 loops at a time, 14 knit loops, knit 2 knit loops at a time, 1 knit loop. At the end of the row there will be 18 stitches on the needles.
Grandma's loops.
Grandma's loops.
Transition thread, knit 2 loops at a time, knit 12 loops, knit 2 loops at a time, knit 1. At the end of the row, there will be 16 stitches left on the needles.
Grandma's loops.
Grandmother's knitting.
Transition thread, knit 2 loops at the same time, 10 knit stitches, knit 2 loops at the same time, 1 knit thread. At the end of the row, there will be 14 stitches left in the product.
Grandma's loops.
Grandma's loops.
Transition thread, knit 2 loops at a time, 8 knit stitches, knit 2 loops at a time, 1 knit thread. At the end of the row, there will be 12 stitches left in the work.
Face loops.
Face loops.
Transition thread, knit 2 loops at a time, 6 knit stitches, knit 2 loops at the same time, 1 knit stitch. When the row ends, there will be 10 stitches on the needles.
Face loops.
Close the working threads of the product.

Sew the parts, secure the threads. Sneakers-slippers are ready.

"Lazy" slippers on 2 knitting needles with description

The main advantage of “lazy” slippers is that they are made in pairs at once. You will need two balls of thread and knitting needles. Very easy to make with 2 knitting needles. Let's look at the description.

Throw on 27 loops from the first ball and 27 loops from the second.

K8, p1, k9, p1, k8.

Do the same with the second set of loops.

Face loops.

Up to 23 is the same as row 2.

Shaping socks.

1 knit stitch, 1 purl stitch - repeat 13 times.

Up to the 12th row, knit as the 4th row.

In rows 12 and 13, 27 loops are reduced to 8 in two stages: every 2 loops are knitted together. After completing the 12th row, 14 loops will remain, after completing the 13th row, 8 loops will remain.

Now you need to assemble the slippers. Pull yarn through the last 8 stitches and pull tight. Sew the edges of the product. Lastly, sew the seam that will bring the heel together.

So the slippers on 2 knitting needles are ready. You probably didn’t have any difficulties with the description. To completely match your product with the original, you will need to gain a little patience and experience. Mastery comes with practice. A very exciting activity is knitting slippers on 2 knitting needles. With the passage of time you will not have any problems with the description.

Before you start working on slippers, select the material and tools.

Yarn. What do you need to know?

Varieties of yarn

Natural

cotton

Pros: yarn, easy to work with; wide range of colors
Cons: long drying time after washing; If the washing temperature is incorrect, the product may “shrink”

Pros: yarn, easy to work with; quick drying after washing
Cons: the color range is limited to natural shades; If the washing temperature is incorrect, the product may “shrink”

wool

Pros: the yarn is warm; large selection of colors and types
Disadvantages: the yarn is very finicky in subsequent care; if the washing temperature is incorrect, the product may “shrink”; if dried/ironed incorrectly, it may stretch; often irritates the skin and can cause allergic reactions (especially in children); wears out quickly with active wear

Mixed

Combines the best properties of natural and artificial materials

Artificial

polyester
acrylic

Pros: good selection of colors; the yarn is easy to work with; good heat capacity (especially acrylic)
Cons: yarn can become electrified; characterized by poor hygroscopicity; during wear, so-called “coils” may appear on the product; some note the characteristic “creaking” of the yarn

Knitting needles and crochet hook. How to choose the tool number?

For threads less than 4 mm thick, the needle thickness should be 1 mm larger. For example, the thickness of the yarn in the figure is 1 mm, the knitting needles are 2 mm
For threads with a thickness of more than 4 mm, the thickness of the knitting needles should be 1.5-2 mm larger. For 3mm yarn, the best working needles are 6mm needles.

If you are going to knit a voluminous pattern with braids (plaits), the size of the knitting needles should be another 0.5 mm larger
An openwork pattern or a pattern with dropped loops requires knitting needles 0.5 mm smaller than expected based on the thickness of the yarn

A small reminder on choosing the thickness of yarn and knitting needles is presented in the infographic below

The hook is selected by analogy with knitting needles

Important: the tool number corresponds to its thickness. For example, No. 2.5 means that the thickness of the knitting needles/hook is 2.5 mm

Basic knitting techniques for knitting needles

The simplest set of knitting stitches

Advice. If you are working with thin yarn, it is better to make a cast on 2 knitting needles, so the edge will be more elastic

To calculate the length of the free end of the thread for a set of loops in centimeters, multiply the number of loops in the description by 2
Make a loop in any way convenient for you and put it on knitting needles folded together. Tighten the loop a little
Thread the threads around the thumb and index fingers of your left hand. The free end of the thread should be on the thumb, the thread from the ball should be on the index finger. Secure the threads by pressing them against your palm with your free fingers.
Hold the loop on the knitting needles with the index finger of your right hand

Hook the thread lying around your thumb with a knitting needle (movement 1 with the red dotted line in the diagram)
Guide the knitting needle with the thread hooked on the left side of the index finger (movement 2 by the dotted line in the diagram)
Make a knitting movement from top to bottom → from right to left → under the thread on the left of your thumb. Then slip the yarn off your thumb, forming a loop on the needle (movement 3 with the dotted line in the diagram). Cast on the required number of stitches

How to knit a knit stitch

How to knit a purl loop

How to knit a yarn over

How to knit two stitches together with a knit stitch slanted to the right

How to knit two stitches together with a knit stitch slanting to the left

How to close loops

Basic crochet techniques

The first loop of the air chain

First loop and air chain

Single crochet, half double crochet, double crochet

Elastic band made of posts, ring, connecting post

The basics are covered, let's start knitting

Beautiful knitted slippers, description

Trendy patchwork style slippers will definitely please and warm the people you love. The knitting technique is very simple and even beginner knitters can do it.

In addition, the pattern “Squares knitted diagonally” is suitable not only for knitting slippers, but also for making blankets or decorative pillows

A short introduction before work

Determine your foot length. The photo below will tell you how to do this correctly.

The diagonal of the base square should be equal to ½ the length of the foot. For example, for a foot with shoe size 37 and a foot length of 22.6-23.3 cm, you will need a square with a diagonal of 11.3-11.7 cm and a side of 8-8.5 cm

Advice. Before you start working directly on the slippers, knit a test square from the selected yarn and calculate the loops taking into account the performance characteristics of the yarn, the knitting needles you have chosen, and your knitting style

The description below assumes the finished product will fit a women's average size (37-38 or M)

Required materials and tools:

yarn of your choice (for women's and men's slippers - 300-400 g, for children's slippers - 150-200 g)
knitting needles 2.25 (correspond to yarn characteristics)

Basic knitting - garter

Knit and purl rows are knitted with knit stitches

Knitting density: 46 loops = 10 cm

How to knit square 1 and square 2. Design of the toe/toe of the product

Cast on 37 stitches on the knitting needles
1st row and all odd numbers: knit stitches
2nd row: 1 edge loop, 16 knit stitches, 3 knit stitches together (slip 1 of the three loops without knitting, knit the 2nd and 3rd stitches together, put the removed loop on the knitted one), 16 knit stitches, 1 edge loop . After knitting a row, there are 35 stitches left on the knitting needle.
3rd row: 1 edge, 15 knit, 3 stitches together, knit, 15, 1 edge. After knitting a row on a knitting needle - 33 loops
5th row: 1 edge stitch, 14 knit stitches, 3 knit stitches together, 14 knit stitches, 1 edge stitch. After knitting a row on a knitting needle - 31 loops
Knit, decreasing three loops in each even row until there are 9 loops left on the knitting needles

Take a control measurement of the connected element and make sure that the diagonal of the square is equal to ½ the length of the foot of the future owner of the slippers

You have 9 loops of square 1 left on your knitting needle. They will become the basis for square 2
1st row: 9 square stitches 1, knit, add 14 stitches along the edge row of the left side of the square. On the knitting needle: 23 loops
Row 2: Knit 14 stitches and extend the row with 14 stitches along the other edge of the square. You have 37 loops on your knitting needle

Knit by analogy with square 1
All odd rows: knit

When the last loop is closed, you will have a kind of “boat” that will form the toe of the future sneaker

How to knit square 3 and square 4. Design of the side parts of the product

Cast on 37 knit stitches along the edge row of one side of the sock
Continue knitting according to the pattern
All odd rows: knit
All even: knit 3 center stitches together

When square 3 is completed, knit symmetrical square 4

How to knit square 5 and square 6. Heel design

Continue working according to the established scheme
Cast on 37 knit stitches along edge sides of squares (3 and 4)
All odd rows: knit stitches
All even: knit 3 center stitches together
Continue knitting until there are 9 stitches left on the needle.
By analogy with the design of the toe of the product, design the last square of the heel

All that remains is to create an armhole for the ankle and the slippers are ready. The knitting algorithm for the second slipper is similar to the first
The armhole is designed in any way convenient for you

using stocking needles
hook

Knitted slippers for beginners

If the previous slippers seemed too complicated due to the elements that are tied to each other, try knitting the model below

All you need to do is knit 8 squares with a side of 9 cm and a diagonal of 12.7 (foot length 25 cm, size 39-40)
Basic knitting - garter
Once all the squares are ready, arrange them according to the diagram and sew them together

Wonderful and cozy house shoes are ready

Men's knitted slippers, diagram

This model is distinguished by its ease of execution, since there is no “toe” decrease in stitches typical for slippers, which scares off inexperienced knitters.
These slippers will warm both men's feet and little children's feet.

Materials and tools:

Thick yarn with density (110 m/50 g) - 200 g
Knitting needles (according to yarn) - #4.5

Knitting density: 16 loops = 10 cm
Algorithm for knitting slippers, size 43 (27 cm along the length of the foot)

Upper cuff

Cast on 55 stitches on the knitting needles
Work the first nine rows in garter stitch.
10th row: purl all stitches

middle part

Select the central knitting loop (28th in a row). The loop can be highlighted with a pin, a special marker ring, or bright thread
11th row: edge loop, 26 knit stitches, yarn over, center loop knitted over, yarn over, 26 knit stitches, edge loop. There are 57 loops on the knitting needle
Row 12 and all subsequent even rows up to row 38: purl stitches
13th and all subsequent odd rows up to the 37th row: edge loop, knit stitch section, yarn over, central loop is knitted, yarn over, knit stitch section, edge loop
37th row: edge loop, 40 knit stitches, yarn over, center knit loop, yarn over, 40 knit stitches, edge loop. On knitting needles - 85 loops

Bottom edge

39th row: all front (edge, 83 loops, edge)
Row 40: knit all
Row 41: knit all
Row 42: knit all

Sole

43rd row: edge loop, 2 knit loops together with a slant to the left, 37 knit loops, 2 loops together with a slant to the right, central knit, 2 loops together with a slant to the right, 37 knit loops, 2 loops together with a slant to the left, edge loop. On knitting needles - 81 loops
Row 44 and all even rows: purl stitches
45th row: edge loop, 2 knit loops together with a slant to the left, 35 knit loops, 2 loops together with a slant to the right, central knit, 2 loops together with a slant to the right, 35 knit loops, 2 loops together with a slant to the left, edge loop. On the knitting needles - 77 loops
47th row: edge loop, 2 knit loops together with a slant to the left, 33 knit loops, 2 loops together with a slant to the right, central knit, 2 loops together with a slant to the right, 33 knit loops, 2 loops together with a slant to the left, edge loop. On knitting needles - 73 loops
Close the loops.

The second half pair is knitted similarly. Sew along the edge and sole.

Video: How to crochet men's slippers?

Women's knitted slippers, diagram

Delicate and very elegant slippers, similar to elegant ballet shoes

Materials and tools:

Yarn - 100-150 g
Knitting needles (according to yarn) - #2.5

Basic knitting: knit (odd rows are knitted with knit stitches, even rows are knitted with purl stitches)
Additional knitting: garter stitch (all rows are knitted with knit stitches)

Knitting density: 20 loops = 10 cm

Algorithm for knitting slippers, size 37 (23 cm along the length of the foot)

Cast on 35 stitches on the knitting needles, continue working, focusing on the diagram

1st row: edge loop, 33 knit stitches, edge loop
2nd row: edge loop, 32 knit stitches, add one loop from the broach, 1 knit stitch, edge loop
3rd and all subsequent rows up to 17th: knit stitches
4th row: edge loop, 33 knit stitches, add one loop from the broach, 1 knit stitch, edge loop. There are 37 loops on the knitting needle
6th row: knit by analogy with the 4th.

Repeat adding stitches until there are 44 stitches on the needles.

Cast off 20 stitches on straight side B (see diagram), knit the remaining stitches in stockinette stitch (1 row)

On side B, cast on 20 stitches again. Knit 18 rows in garter stitch, removing 1 stitch from side A at the beginning of each knit stitch (knit 2 stitches 1 knit). Repeat decrease 9 times

From side B, cast off 8 loops. Proceed to design the sole of the half-pair (you can use a thread of a darker color)

The sole is knitted in garter stitch. In each even row, increase 1 knit stitch on both sides of the row. Repeat the addition 8 times. The number of loops will increase by 16.

Then decrease each even row by 1 stitch on each side of the row. Repeat decreasing 8 times until you return to the original number of stitches.

Close the loops. Sew the seams.

How to knit a rose:

Cast on 50 stitches on the knitting needles
Knit 6 rows in stockinette stitch
Close the loops
Twist the knitted ribbon in the shape of a flower, secure with threads
Sew a rosette to a slipper

You can decorate your slippers with decorative bows, buttons, sequins, etc.

The second half pair is knitted in mirror symmetry

Children's knitted slippers, diagram

By analogy with the previous pattern, you can knit wonderful children's slippers

And another great idea for simple children's slippers, knitted with your own hands

To make such slippers you will need two rectangles:

one for the sole. Accordingly, the width of this element is equal to the width of the foot, and the length is equal to the length of the foot. Don't forget the seam allowances!
the second is the top of the sneaker. The width should match the width of the rectangle-sole, the length should be 2 times the length of the first part

Sew the blank rectangles according to the pattern and decorate as you wish

Important: slippers are sewn in a mirror image!

Knitted slippers with felt soles, diagram

The proposed option will not require much time and effort, but will provide warmth and comfort.

All you need:

felt sole
yarn
knitting needles and needle and threads for stitching

Knit a long piece of fabric into a scarf. The length and width of the fabric depend on the size of the insole

When the fabric is ready, sew it to the insole, following the diagram for children's slippers presented above and the photo below

Knitted slippers-socks, diagram

Sock slippers, known as Japanese knitted slippers, are very comfortable and, like everything Japanese, extremely easy to make.

Video: Knitting Japanese slippers and socks with knitting needles

Crocheted slippers-boots, pattern

A detailed master class on crocheting slippers-boots is presented in the video below

Video: Master class on crocheting slippers-boots

Video “Knitted slippers without seams. Knitted slippers" will reveal the secrets of mastery

Video: Knitted slippers without seams. Knitted slippers

The cold weather has arrived, and at this time of year, more than ever, you want to be warm and cozy. Of course, you want to keep your feet warm. Knitted slippers can help with this. They are quite warm, comfortable and beautiful, and they are also a great gift for your loved ones.

Master class for you on how to knit slippers

Knitting beautiful warm slippers on two knitting needles, with diagrams and descriptions at hand, is quite simple.

The proposed option is quite simple even for beginners. One of the advantages is that they are knitted in pairs at the same time.
To work you will need knitting needles and yarn of two colors, 138 meters each. Before starting work, you should prepare the yarn into balls (if it was in skeins). Considering that two products are knitted at the same time, skeins of different colors are connected into two balls. You can also make them plain.

29 loops are cast on the knitting needles from one ball and the same number from the other ball. One set for one slipper, and another for the second. Thus, both products will be knitted exactly the same. This guarantees the identity of the slippers.

Now you can start knitting. First row - k9, p1, k9, p1, k9. Thus, the first row of the slipper ends up on the second knitting needle. The first row of the second slipper is also knitted.

The second row is knitted with knit stitches. Thus, two V-shaped lines are formed. 23 rows are knitted. Even if you lost count, you can count the knit stitches that form the lines; if there are 24 of them, then the first stage is complete. The resulting slipper base will be size 37.

Shaping the toe. The next 8 rows are alternating k1, p1. And so all 29 loops on both slippers. In the last two rows, the total number of loops 29 is reduced to 8. This is done in two steps: every two loops are knitted together, since the number of loops is odd, the last loop is knitted in its place, thus leaving 15 loops, the product is turned over and the procedure is repeated, after which there should be 8 loops left.

Now the last step remains - to assemble the products. The thread is cut so that it is enough for the seam. Very carefully, one of the future slippers is removed from the knitting needle and, starting from the last loop, the thread is pulled through all the loops and pulled tight. Before doing this, you should make sure that the V-shaped ridges are on the outside.

This calculation is suitable for sizes 36 -38, if you need a larger size product, you can knit 11 knits, 1 purl, 11 knits, 1 purl, 11 purls. And so there are 28 rows, and the sock is done in 10 rows. For a child, you can try knit 7, knit 1, knit 1, knit 7, knit 18 rows, sock knit 6 rows. The resulting slippers stretch quite well, so they will fit more than one size.

The size of the slippers, in the proposed description, is 36-37, which corresponds to an average length of 22 cm.

The slippers are knitted from the bottom up. Cast on 84 stitches on needles No. 3, knit the first 14 rows in garter stitch, and then begin knitting the leg. From the middle of the row, the knitting of the two middle loops begins, so two parts of the trace come out - the outer and the inner. This is how you knit up to 42 rows of approximately 10 cm. Next, 12 rows are knitted in garter stitch. Now all that remains is to assemble the finished product by sewing it along the lines of the sole and heel.

Another option for knitting slippers

Knitting begins with a set of loops, the number of which depends on the size of the leg. On average, for an adult, you need about 40-60 loops. It is only necessary that their exact number be odd.

First, the top of the slipper and its sides are knitted. Any dense knitting, for example, garter stitch or 1x1 stitch, is suitable for this. For slippers with a lapel, 20 rows or more are knitted, and for slippers without a lapel, 10 rows will be enough. The knitted fabric is divided in half, leaving one loop in the center. The toe is knitted up in garter stitch.

In each row, the first half is knitted up to the middle loop, a yarn over is made, the middle loop is knitted, and the yarn over is done again. This way the product is knitted until the required depth is reached. The next step is to create the sole.

The fabric is divided into three parts, the middle one will consist of 11 loops. It is knitted as follows: the first part is knitted to the middle one, then 10 loops are knitted from the middle part, and the 11th is knitted together with the 12th, which is the first in the third part.

Then it is knitted to the end of the row, the product is turned over and the procedure is repeated until there are no loops left for the sole - 11 loops in the middle. For the back of the heel, all remaining loops are knitted in several rows, knitted together with the first loop of the side parts on one side and the other.

Another description is seamless socks on two knitting needles. Very beautiful and light model.

The socks begin to be knitted from the toe of the sock up, the product will eventually turn out without a seam.

Then you need to determine the average circumference, add the resulting values and divide by two. Based on the resulting number, the required number of loops is calculated.

Now you can start knitting.

The yarn is connected to an additional thread, the length of which is about 35 cm. Half of the calculated loops are cast on the knitting needles. The first row is knitted with knit stitches, the second row is knitted with purl stitches, the last stitch is not knitted.

The next row is knitted, the last stitch is not knitted. And so on until a third of the calculated loops remain. Then the number of working loops begins to increase. In subsequent rows, one slip stitch is knitted.

To avoid large holes, it is worth lifting the side loop onto the left knitting needle and knitting it together with the next purl stitch, in the purl row, and the knit stitch in the knitting row. Knit this way until all the loops are worked. This creates a toe.

Next, the loops that were secured with an additional thread are included in the work. The first loop is lifted and transferred from the left knitting needle to the right, all other loops are also raised until they are all on the right knitting needle.

The auxiliary thread is carefully removed. Knitting continues as follows: the first loop raised from the auxiliary thread is knitted, the next loop is removed and the thread appears in front of it, then one loop is knitted again, and the next one is removed, and so on until the end of the row, knitting the last loop.

Next row: slip the first stitch, knit the next one, then purl it and repeat until the end of the row. In one row one half of the loops is knitted, in the other the second, thus the pipe comes out.

When the length of the product becomes equal to the length of the foot without the heel, knitting of the heel begins. After one, the loops are removed onto the auxiliary knitting needle.

The remaining loops are knitted in the same way as for the toe of the sock. First, the number of working loops is reduced to a third, then one loop is put into work in each row until they are all used. All loops are transferred to one knitting needle, one knit stitch is knitted in turn from the front knitting needle, and one loop is removed from the back knitting needle.

Then it is knitted in the same way as the foot, up to the height at which the elastic begins. The elastic band is knitted as follows.

One loop is removed, one is knitted, the next is removed, the thread is in front of the work, one is purl, the next is removed, the thread should be in front of the work. And so on until the required height of the elastic band is obtained.

All loops are closed and the sock is ready.

Did you like the master class on how to knit warm slippers with your own hands? Share on social media networks with girlfriends!

Watch the detailed master class How to crochet slippers and boots on video:

Leave your comment

Socks-slippers!

Let's say we take a blue and a red thread! Cast on 49 loops with blue thread. Knit 2 rows. Then we change the thread and knit 2 rows with red thread. Then we reattach the blue thread.
And now carefully row 5: we remove the first loop as usual, we also remove the second loop, we knit the 3rd loop with a knitted blue thread, we simply remove 4, knit 5, 6 we remove, 7 knit,..., 47 knit, 48 we remove, 49 we knit purl as usual ! You should end up with loops of different colors on the needle alternately.
We knit the 6th row like this: we remove the first loop with a blue thread, we also remove the 2nd loop, but so that the blue thread is behind the front of the loop, that is, it should pass on the wrong side of the product, the 3rd loop is front, the 4th loop is like 2, etc. d. to the end of the row.
Row 7: take the red thread and knit 2 rows.
9th row: take the blue thread, and start knitting the same way as in the 5th row, remove one, knit one..., so we knit 23 loops, remove the 24th loop, and from the 25th loop we make 9 loops (knit, yarn over, knit, yarn over, etc. .d.), 26 remove, 27 front, etc. to the end of the row.
10th row: we knit exactly the same as the 6th row, and we knit the loops that were knitted from the 25th loop of the previous row, and continue the same as in the 6th row.
Row 11-12: take the red thread and knit.
Now we knit 9,10,11,12 rows alternating to make 7 flowers (9 out of 1) - the number of flowers can be added or subtracted depending on the size of the foot.
It turns out that you finished with two rows of knit stitches with red thread.
Knit the next rows as 5,6,7,8.
And then you knit the trail, just as I described it in the first case.
I knitted the trail with threads of two colors together. In our case, blue and red. This makes the trail denser! You can also add synthetic thread to the mark for strength.

Well, the sock is ready. Try it!

The footprint and heel are knitted like this.
You should have 105 loops on your knitting needles (if you knitted according to my description on the basis that 7 flowers are knitted). I knit the trail from 11 loops. that is: (105-11)/2=47. In total you knit 47 loops. Then 10 more loops, knit the 11th and 12th loops together, then turn the knitting, knit 10 loops again, 11th and 12th together, turn again, and so on until you run out of loops. It turns out almost the same as the heel of a sock. Then close the loops and sew the heel. Knitting is finished.