Sketches of mittens potholders. We sew potholders: the main kitchen accessory

The kitchen in the house is often almost the most important room. After all, not only all kinds of dishes are prepared here, the whole family gathers at the table, guests meet, important dates are often celebrated.

It is very important that the kitchen is comfortable and beautiful. Comfort in it will help to create special textiles that you can make yourself. tack, perhaps the very thing with which you can try to start creating your own unique kitchen.

How to sew a potholder with your own hands?

The main requirement for tacking is low thermal conductivity., so you need to make it two or even three layers. As for the design and shape, potholders can be absolutely anything - round, square, in the form of a mitten or in the form of a fruit. And yet the most common types of potholders are square and mitten-shaped.

If you want to sew potholders using the patchwork technique, then read the articles Do-it-yourself patchwork, Patchwork for beginners.

Square oven mitt

In order to independently sew a tack-square, You will need:

thick cotton fabric, the size of which is 18x18 cm - 2 parts;
a piece of batting 18x18 cm - 1 piece;
thin cotton ribbon for edging 4x80 cm in size - 1 piece (it is cut out along the oblique);
threads to match the color of the fabric;
wooden ring with a diameter of 4 cm.

On one piece, mark 35x35mm squares at a 45 degree angle. Then connect the batting and the part you marked out, line up the cuts and make lines according to the markup. Take the second part and lay it face up on the resulting quilted part, make a line around the perimeter at a distance of 4-5 mm from the cut; 4.

Prepare a strip for edging - bend the cut in half and iron. Then fold the sections and also iron. As a result, you will get a strip with a width of 10 mm. Starting from the middle of one side, make a fringing of the cuts of the pot holder. Before completing the edging, form a hanging loop, 4 cm long, from the remnants of the strip and thread the prepared holder ring.

How to sew a potholder for the kitchen in the form of a mitten?

To make a mitt, You will need:

thick cotton fabric measuring 70x20 cm;
a piece of batting 70x20 cm;
thin cotton fabric measuring 20x20 cm;
strip for edging 50 cm long;
threads of the desired color;
wooden ring with a diameter of 4 cm.

Fold the fabric in half so that its right side is inside. Cut out the details of the pot holder, there should be 2 pieces each - batting, a dense cotton top, a thin cotton lining. Lay the top, lining and batting pieces on top of each other and stitch in 35x35mm diamond patterns.

Trim the outer edge of the mitten. Attach a loop with a ring to the outer cut. Fold the quilted blanks with the front part inward and stitch them along the cut, the seam width should be 1 cm. Turn the tack right side out and iron well.

How to sew beautiful potholders in the shape of a heart?

A beautiful and original potholder is tack in the form of a heart.

You will need the following materials:

matching color fabric
stuffing material, e.g. foam rubber,
red braid,
desired thread color.

We also need your great desire to do something very touching.

Draw a heart according to your own template and divide it into 3 parts.

Cut out a whole heart from the fabric of the same color (this will be the back of the potholder) and 2 extreme parts also from the material of the same color.

Sew on the tape around the edges from the inside and back. Make a pattern of the middle of the heart from a material of a different color. Now sew all the parts of the heart together, remembering to sew the back.

Cut off the resulting excess material and fill the heart with filler (it is better to use a thin one). Sew along the red ribbon, and your heart tack is ready.

Photos taken from the site: www.liveinternet.ru

DIY maple leaf tack

A beautiful and unusual potholder can be potholder-maple leaf.

Cut out the maple leaves according to the template. For one tack, you need 3 such sheets, each subsequent leaf should be slightly smaller than the previous one.

Sew a loop to the base of the first sheet. Then fold 3 leaves together and stitch them together to create maple veins.

Photos taken from the site: handmade.antikus.ru

How to sew potholders for the kitchen from drape?

A beautiful and uncomplicated version of the potholder comes out of the drape. This material is quite dense and therefore does not require an additional layer. Cut out 1 or 2 pieces and finish the edges.

Original potholders from the drape are obtained in the form of cats. Draw on paper not very big cute cats. Cut out the details from the drape. Sheathe the edge with a colored thread with a single crochet and make a loop. Embroider the cat's face with threads and make button eyes.

Potholder for a cozy kitchen is ready!

By experimenting with different types of fabrics, fillings, appliqués and other decorations, you can start creating cute and pleasant things. They will be able to decorate not only your own kitchen, but also the kitchen of your girlfriend, mother, grandmother or mother-in-law. A little imagination - and a wonderful handmade gift is ready!

Especially forlucky girl. en— CNezhana

Potholders for the kitchen are a necessary and absolutely irreplaceable thing. And if it is made with your own hands, organically fits into the interior, then this will be a significant plus in the aesthetics of cooking. It's no secret that you want to once again hold in your hands an elegant cute little thing, on which time was spent. Moreover, making a pot holder for the kitchen with your own hands will not be difficult, you just need to choose the necessary material and come up with its appearance.

This necessary little thing appeared next to the first hearths in the caves of our ancestors, when fire firmly took its sacred place in the life of primitive people. Of course, the first potholders were not as comfortable and elegant as modern kitchen utensils. Most likely, these were large leaves from nearby trees, shrubs, or pieces of the skin of animals killed in the hunt. But the ancient mistresses quickly appreciated their indispensability, improving the form and material for execution over the centuries.

Over time, the potholder began to turn into an element of kitchen decor, in which a woman spent most of her life. At first, these were handicraft items, the hostess herself invented and brought to life original potholders for the kitchen with her own hands. Over time, they even ceased to be necessary household items, turning into elegant lace details of interior decoration. They were collected, fashion trends were created, they became stylish gifts for all kinds of holidays and anniversaries. At the beginning of the last century, housewives rushed headlong into tack-mania. They collected bit by bit information on how to sew potholders for the kitchen, bringing to life more and more original potholders that became works of art.

Later, entrepreneurs drew attention to potholders, who began to create kits for the kitchen, which included aprons, several types of potholders and towels. Today, the industry has gone even further, offering housewives molded silicone potholders that are easy to use, do not deform from high temperatures, are resistant to detergents and cleaners, and do not change shape and color from prolonged use. You can choose a silicone glove or a funny beak in a variety of colors.

But, despite the opportunity to purchase a standard set in the store, the creation of do-it-yourself potholders for the kitchen continues to be the prerogative of lovely women who are trying to decorate their life, kitchen, find application for talent and imagination. After all, sometimes it is this small object that can significantly change the interior, decorating it, bringing a twist to its simplicity and routine.

What can be used to make a potholder

Thrifty housewives rarely spent money from the budget on the purchase of tacks. And why? Indeed, for their manufacture, any material is suitable, the scraps of which can be found in every home, or old things gathering dust in the closet. The main thing is that the fabric is dense enough to protect hands from possible burns received from touching hot dishes or accidentally spilling boiling water.

If there are a large number of old denim items lying around the house, then they are perfect for these purposes. Dense material in this case will reliably protect the hand from the hot touch of dishes or steam. In addition to denim, any cotton flap, felt scraps, or the remains of knitting threads with a hook will do. And how to sew a potholder for the kitchen, the most popular today, can be found in the following chapters.

If you don't have a sewing machine

Do not be upset and think about how to sew a potholder for the kitchen, if there are no sewing skills, there is no sewing machine, and the desire to do something original, individual is huge. You can easily sew a potholder for the kitchen with your own hands, you just need to choose the simplest shape for it, choose the right fabric. It can be a rectangle, a circle or a heart, for example. It is better that the fabric is natural, not crumbling during sewing, easy to wash, a synthetic winterizer, batting are suitable for laying.

Having made a pattern on cardboard, transfer it to the fabric in two parts, duplicating it on a padding polyester. Baste the gasket with the parts folded face to face, leaving a small area to turn inside out. You can sew them with any known seam, “by the needle”, for example, given that the smaller its step, the tighter the connection will be.

After turning the product, carefully align its shape, helping with a pencil or pen. Turn the unsewn edges inward, insert a ribbon for hanging and sew with a decorative seam, continuing it around the entire perimeter of the product. Even the simplest seam will look stylish if its step is maintained, the distance from the edge of the product is the same everywhere. Having stuffed your hand a little on the simplest design, you can move on to a more complex sewing technique without a sewing machine - patchwork.

Patchwork in the kitchen

Sewing from scraps of clothing and household items, patchwork, was known even before our era. At first it was a necessity in homes where people could not afford new clothes or blankets. Therefore, women collected whole parts of old textiles, pieces of leather or linen, sewed them together, getting the necessary things.

Today, patchwork is a way of self-expression and evidence of great perseverance. After all, in order to create the smallest object in the patchwork technique, you need to know some important rules, great patience. Therefore, it should be approached by people who are not so much creative as patient, perfectionists.

One of the most important rules for making a really high-quality, beautiful patchwork product is patterns. Before proceeding with cutting, sewing, it is necessary to create templates for each element of the product from thick paper or thin plastic. Typical layouts for parts for beginners can be found on the Internet or in special magazines. There are indicated not only the dimensions of each element, but also the sequence of their connections.

To make potholders for the kitchen with your own hands using patchwork technique, it is advisable to select pieces of fabric of approximately the same structure, easy to cut and not deformed. The best option would be coarse calico, cotton, linen, costume fabric or tapestry. Before opening, they should be washed for possible shrinkage, ironed.

The joining of the parts should be started only after they are all cut and assembled on a flat surface for fitting. Before attaching each subsequent element, the seams should be smoothed with an iron. Do-it-yourself potholders for the kitchen can be sewn in two styles of patchwork technique:

The first successful products in the patchwork style sometimes inspire a person so much that he devotes all his free time to creating magnificent beauty and originality products for home use. After all, even from the same pieces of fabric you can create completely different products, you just need to change their order or shape of the pattern. And it begins more and more often with the simplest and most unsightly at first glance do-it-yourself potholders for the kitchen. The photo below shows a clamp made in a more complex technique called “patchwork corners”. This is already a work of art, which is a pity to use, it is better to find a place for it on the wall.

Patchwork-style details can not only be sewn, but connected with a crochet hook and a thin thread. And if there is no desire to mess with the fabric, the soul lies only in working with knitting needles or with a hook, then you can make a knitted pot holder for the kitchen.

Knitted tack

For those who know how to knit, you can try making a knitted potholder for the kitchen. Each needlewoman always has a few small multi-colored hanks left after knitting sweaters or hats. The most suitable will be a thick cotton thread or thinner in several layers.

Knitting of potholders for the kitchen begins, like all the previous ones, from inventing a design. If it is flat, then you need to calculate the dimensions that are most convenient for the hostess.

The simplest, affordable even for a beginner needlewoman, is a round tack. It is enough just to crochet a few loops and knit in a circle with columns or columns with a crochet to get an original little thing. You can take such a potholder as a basis, beating its design and turning it into a cute kitten or ladybug.

It is necessary to start knitting potholders in the form of mittens after drawing up a pattern on paper and counting the necessary loops. It should be remembered that a mitten that is too tight is difficult to constantly remove and put on, which is necessary during cooking. And an excessively large one will constantly strive to leave the hand, sometimes at the wrong time. Therefore, it is necessary to circle the hand on the pattern with a margin of 1-2 cm around the perimeter. You can knit it like a regular mitten with five knitting needles, with a cover using a hook or in the form of two parts, which can then be sewn. It is advisable to wash and dry the threads for knitting before work to exclude possible shrinkage of the finished product.

How to sew a potholder for the kitchen from felt

If you had to work with felt, then the impression always remains positive and the desire to continue to invent crafts from it does not dry out. This is the most fertile material - it is easy to cut, does not crumble, does not deform when cutting, does not require overcasting. The only drawback is that you need to pay a certain amount for its purchase, and it is quite high. But if there is felt and the desire to create is great, then you can proceed to the pattern.

Since kitchen mittens and potholders are always in sight, they must be neat and beautiful. Therefore, it is better when there are a lot of them on the farm, so that from time to time you can change them.

In addition, to sew potholders for the kitchen with your own hands, you do not need to have serious experience and needlework skills, so you can sew them together with your child.

And also original homemade potholders are a great idea for a gift and even ... a small hand-made business.

Choosing fabric and filling

The main thing in sewing potholders with your own hands is the right choice of fabric and filler.

The best fabrics for potholders are natural fabrics such as linen, chintz or cotton. But try to choose dense fabrics - they will last longer.

Tip: You can also use scraps of old jeans.

You can choose not only original fabrics, but also shapes - hearts and mittens, strawberries and Christmas trees, squares and stars. Also keep in mind that different forms of pot holders differ in functionality, which means that it is best to make a complete universal set: a few squares, a long pot holder, a mitten.

Filler must be inserted inside the tacks. Most often it is a synthetic winterizer, batting, felt or drape. Batting and other dense, thick natural materials for sewing tacks are more suitable, since the synthetic winterizer has a high thermal conductivity and, at the same time, a low melting threshold.

Tip: You can use an old terry towel folded in several layers as a filler.

Embroideries, appliqués, ruffles, etc. are used as decoration.

How to sew a potholder-mittens

So, how to sew a potholder quickly and easily? Let's first sew such a traditional mitten with a fringing and an eyelet.

There are many ways to sew mittens, but the principle is about the same - using 6 layers - 4 pieces of fabric and 2 pieces of filler.

First we need to make a tack pattern. Place your palm on the paper (or directly on the fabric), indenting 2.5-4 cm from it, schematically draw the outlines of the mitten as in the photo on the right, and then cut out the resulting template.
Cut out 2 pieces of lining fabric and 2 pieces of front fabric according to your pattern. You can cut all 4 pieces from one material, but it is better to choose a soft, natural, pleasant to the touch fabric for the inside of the mitten, and a dense, beautiful, colorful fabric for the front side so that the spots on it are less noticeable. We chose different types of cotton fabrics for the inside of the mitten and its front part - for originality and clarity of the example.
Now, also in the shape of a mitten, cut out 2 pieces of filler. We remind you that it is better to refuse synthetic materials. In our case, ordinary white fleece is used, but it is better to take a denser and thicker fabric, for example, the same batting.
And now you need to put all the details in a puff sandwich in the following order:

We fold two blanks from the facial fabric to each other "face" as in photo No. 1.
Now, on top and bottom of the already folded front parts, we put blanks-mittens from the filler (photo No. 2).
And finally, we apply the purl fabric in the upper layer “face” up, and in the lowest layer we put the last blank (purl) “face” on the table (photo No. 3).

Now let's start sewing. All edges are sewn with an indent of 5-7 mm, and as a result we get an inverted tack.

Now we cut off the excess fabric at the edges (about 3 mm from the seam) and make cuts in all the fillets (photo below) so that our mitten turns out neatly.

Now we turn the product inside out and decorate the sleeve with a piping - an oblique trim (preferably not satin, but cotton), a strip of fabric, braid or ribbon. Since our goal is to show the easiest and fastest way to sew potholders with our own hands, we use a ready-made bright inlay and simply wrap our mitten with it, fasten with pins and sew. If you are using fabric, then it must be attached with a folded edge. At the end, we sew a loop from the same inlay and our mitten is ready.

Here is another cute potholder, sewn according to the described method.

Also see our other articles:

If you want to complicate the task a little and make the mitten quilted, then you need to slightly change the sewing process as follows:

First you need to “quilt” one three-layer blank simply from rectangular fabric cuts, folded in the same order as described in the instructions in paragraph 4, and then the second. Keep in mind that the threads should match the front material of the mittens. You will get 2 quilted rectangular parts of the future potholders, which need to be folded together so that the wrong sides look outward from the bottom and top of the “sandwich”. And finally, we sew the folded parts along the contour of the mitten template (see paragraph 1). Next, we process the edges of her sleeve with braid or fabric and sew on a loop.

We sew a square pot holder or a hot stand

Now let's start sewing a square potholder, which is very, very easy to sew - unlike mittens, here we use: 2 pieces of batting and 2 pieces of face fabric. Patterns are made for all parts measuring 20x25 cm (or any other). You also need a strip of fabric for the loop - 8x15 cm, and of course an ironing board, iron, needle and thread, a sewing machine and scissors.

Work is carried out according to the following algorithm:

Again, a “sandwich” is made from the fabric: 1st layer - batting, 2nd layer - fabric face up, 3rd layer - fabric face down, 4th layer - batting. Such puff blanks need to be made 2 pcs.
Two blanks are sewn together from 3 sides, while the lining should still be outward.
The tack is turned inside out, ironed.
The loop is sewn and takes root.
The fourth side is stitched.

a square tack can also be quilted if desired;
you can also sew a pocket to one side;
by the same principle, you can sew potholders in the shape of a heart, a circle, stars, etc. with your own hands.

Here are some ideas for sewing potholders with your own hands according to the basic principle described above (scroll the photo to the right).

Patchwork potholders

Patchwork potholders look unusual, but before you start sewing, you should decide on the technique of connecting patches. Here are 3 main ways:

Building blocks - you will need to make square elements, and then process them on a typewriter.
Pattern sewing - pieces are cut according to special patterns. These are elements such as birds, leaves, hearts.
Sewing on the base - here the elements are not sewn together, but sewn to a pre-prepared base.

To make a simple patchwork product, you need to prepare three colors of fabric, a knife, threads that match the color of the fabric, pins and a ruler. Then we prepare shreds - squares with a side of 10 cm. Each of the squares is cut into triangles, and they are already stacked as required by the schemes. All triangles are sewn together, and one side of the product is obtained. The second side is made according to the same principle, and lining material is placed between them. Then the edges are carefully sewn up, and a loop is attached to the corner - that's it, the tack is ready.

And here is a selection of fresh tack ideas for experienced and beginner needlewomen using the patchwork technique (scroll the photo to the right).

The oven mitt, which is an essential attribute of any kitchen, must be sewn with high quality and from dense materials that will protect the delicate skin of the hands from burns. The modern market offers a choice of hundreds of different options for such products, but it is often very difficult to find the optimal one. It is better to try to sew it yourself. Anyone can make potholders for the kitchen with their own hands, because. for this you do not need to have special skills and serious experience in needlework.

What are kitchen potholders

An oven mitt is an accessory specifically designed to protect hands from injury and burns when cooking. If you need to warm up a bowl of soup in the microwave or heat water on a gas stove, then this accessory will become a real helper. Potholder can be not only a functional product, but also an original aesthetic decoration of any kitchen. A bright and interesting-looking accessory will become an interesting stroke in the interior of the room, adding a certain personality to it.

The history of the emergence of such a product has more than one thousand years. The first options, most likely, were large leaves from trees or a piece of animal skin. Ancient housewives appreciated such accessories, and over the centuries their shape and material have only improved. Over time, from ordinary household items, they turned into elegant things with designer decoration, which became an interior decoration.

Kinds

You can get original potholders if you make them yourself from improvised materials. For their manufacture, you can use cotton fabric, denim, felt and some others. Depending on the material of manufacture, the tacks are textile, silicone. According to the purpose, the following types of tacks are distinguished:

Single. They have high thermal conductivity, ideal for small surfaces: lids from pots, pans, kettles.
Double. Differ in average thermal conductivity, suitable for grabbing a pan, getting a hot baking sheet.
Mittens. It is recommended to use in pairs. They have low thermal conductivity, but are suitable for pots, pots, large containers.

Optionally, pot holders are decorated with embroidery, applique (flat or voluminous) and made in the classic patchwork style. The styles described can be combined. Housewives, guided by their imagination, sew square and figured products in the form of berries, Christmas trees, rabbits, butterflies, hearts. In their work, they use a variety of schemes and patterns:

squares;
ohio star;
solomon star;
carousel or mill;
Russian;
vortex;
house;
hourglasses.

The choice of material for sewing potholders with your own hands

You can make beautiful potholders out of fabric with your own hands, provided that you choose the right material, filler. Helpful Hints:

The best fabrics for making potholders are considered natural, for example, cotton, chintz, linen. You should choose those fabrics that are easily swept away and do not crumble. Give preference to dense options, because. they will last longer and better protect against high temperatures.
Do not use flammable fabrics, which include satin, synthetics. Synthetic fabrics have an increased risk of fire (they ignite easily), as they Often you have to take dishes from an open fire.
You can use old jeans. A fabric of this type folded in two layers will be dense and will not let any heat through.
Another great option is felt. It is ideal in that it does not crumble and keeps its shape perfectly.
A seal must be inserted inside the product. Often it is used as a drape, felt, batting, synthetic winterizer. Dense, thick natural materials are more suitable (the same batting), because. synthetic winterizer has a low melting point and high thermal conductivity. Even a terry towel folded in several layers can be used as a layer.

How to sew a potholder

To make your own potholder original, you can combine different styles using triangles and squares. Such a patchwork technique will help to achieve interesting effects. Useful tips for self-sewing potholders:

Before cutting, you will need to wash and iron the selected shreds.
Additionally, check if the fabric is shedding - for this purpose, soak the shreds in hot water. If the water becomes colored, then discard such material.
For easy storage of the accessory, you will need to make a loop.
When making a pattern, do not forget to leave 1 cm around the edges for hemming the product.

Square

A do-it-yourself square-shaped potholder is one of the easiest options. You will need two pieces of batting and face fabric. Manufacturing technique:

Make a pattern of all elements with a size of 20x25 cm. For a loop, you will need a strip of material - 8x15 cm.
It is necessary to prepare a pair of puff blanks, in each of which fold the layers in the following sequence: batting, fabric face up, fabric face down, batting.
Sew two blanks together on three sides. The lining should be on the outside.
Turn the tack inside out and then iron it.
Next, sew and attach a loop.
At the end you will need to sew the fourth side. If desired, the square can be quilted.
The described principle is suitable for the manufacture of tacks in the form of a circle, stars, heart, etc.

Mitten

The mittens are very practical. It is almost impossible to get burned in it if the thickness of the material is optimal. For the pattern, take your own hand as a basis, which you need to circle on paper. At the same time, step back from the edge of the picture 5-6 cm, forming a rounded contour. To make such a tack with your own hands, you will need a fabric, a sealant (for example, synthetic winterizer), adhesive interlining, metal rings for decoration. Main stages:

After laying the finished pattern on the fabric, cut out 4 parts for each mitten: one straight, and the second in a mirror image. Prepare a non-woven lining for each piece - 4 pieces in total.
Cut strips for eyelets, edging. The size for the first elements should be 10x4 cm, for the second - 7.5x32.5 cm.
The same elements need to be cut out of non-woven fabric, then glue the edging, assemble the parts and quilt.
Sew all the component parts and turn inside out. Sew on a curly loop and edging. Details can be swept or pricked with pins before sewing on a typewriter.

figurines

With a little experience, you can make a potholder with your own hands in the form of a particular figure. The pattern is of primary importance, because. on how competently you make it and calculate the number of details, the more effective the result will be. The easiest way to make a "mouse" tack:

Prepare the pattern. Fold the thick fabric in half and cut out the details of the future potholder based on the pattern.
Cut out one detail of the accessory from the padding polyester and another from the striped fabric.
The head of the mouse is best made from light fabric, and the rest of the product from green. For the ears, use a light fabric (4 parts).
To sew the edges, cut strips of 3 cm wide from the striped material and a small piece for the eyelet.
On the wrong side of the striped material, put a dense fabric, and on top - a piece of padding polyester. Make parallel diagonal stitches.
Attach a double-folded rope that will serve as a loop. Sew the ears, and then turn them inside out.
Sew together the detail of the head from light material and the rest of the “mouse” from green. Attach an element of dense fabric to the wrong side of the resulting part, stitch it.
Fold the front and back sides of the accessory, stitch them along the edges.
Attach a long strip to the back side, wrap its edges, tuck and stitch.
At the end, sew a nose from a button (brown), eyes from beads (black) to the “mouse”.

Patchwork

Making a patchwork style kitchen accessory will require patience, skills, but the result will be spectacular. First, decide on the technique for connecting the pieces:

Base sewing. In this case, the elements are not sewn together, but sewn to a ready-made base.
Pattern sewing. Patchwork is cut according to special patterns. It can be elements such as leaves, hearts, birds.
Standard blocks. First you need to make square elements, and then process them on a sewing machine.

To make a do-it-yourself tack from scraps beautiful and durable, please note that the parts should be cut strictly along the shared thread, otherwise the accessory may be deformed. The technique is as follows:

Prepare a fabric of three colors and threads that should match the tone of the fabric.
Make patches in the form of squares with a side of 10 cm. Then cut each element into triangles.
Lay the triangles in accordance with the chosen scheme, sew together - in the end you get one side of the accessory. Do the second one in the same way.
Place the lining material between the two sides, carefully sew up the edges and attach a loop to the corner.

Knitted pot holders

Another way to create a practical and effective kitchen accessory is to crochet, because even a simple pattern will help to make a beautiful pot holder. Please note that too voluminous schemes will not work, otherwise it will be inconvenient to use the accessory. The motive for this may be different.

Moreover, making a pot holder for the kitchen with your own hands will not be difficult, you just need to choose the necessary material and come up with its appearance.

History of potholders in the kitchen

What can be used to make a potholder

If you don't have a sewing machine

Patchwork in the kitchen

traditional, where the second layer is a solid fabric;
quilting, where the end result is two canvases stitched together with a padding layer.

Knitted tack

Knitting of potholders for the kitchen begins, like all the previous ones, from inventing a design. If it is flat, then you need to calculate the dimensions that are most convenient for the hostess.

How to sew a potholder for the kitchen from felt

You can come up with the shape of a future potholder for a kitchen made by yourself or “peep” on the Internet. A drawing printed in the desired format can be easily transferred to the material using carbon paper. Next, the details are cut out, sewn together. You can work both on a sewing machine and with the use of hand seams, skillfully using them as an additional decorative element. It is only important to monitor their neat appearance. This greatly affects the final result.

Seamstresses experienced in working with felt recommend a good alternative to this rather expensive material - in any hardware store you can buy viscose cleaning wipes, which are in no way inferior to it. And you can decorate with an appliqué of colored pieces of fabric, felt or the same napkin, sewing it on with a blind seam or stitching it on a typewriter. You should work with the decor before stitching the parts of the tack, leaving it in the end.

Potholders with embroidery

The simplest potholder, made in one color, can be turned into a real decoration for the kitchen with a little imagination and a hank of floss. Having prepared the base, transfer to it with the help of a carbon paper the desired drawing, taken from sources or invented on your own. It can be cross-stitch or satin stitch of complex elements. But even the simplest stitches, plain snowflakes, crosses, rhombuses made of a contrasting thread will greatly decorate a do-it-yourself kitchen pot holder.

There are a huge number of techniques for decorating products using embroidery: cross stitch and satin stitch, beads and ribbons, a monochrome or color pattern. Before making a choice, it is worth deciding on the final purpose of the potholder. After all, silk or satin ribbons will quickly lose their elegant look, beads can break, crumble if used to work with hot pots and baking sheets. But embroidery with cotton threads will serve no less than the tack itself. And do not dwell on the variety of themes for embroidery, choosing only kitchen or fruit and vegetable. Flowers, small insects or cute stylized faces of animals and birds will look very stylish.