How to make a rose from velvet paper. How to make a paper rose with your own hands: master classes of varying complexity

Good afternoon. Today I want to show you the fastest ways to create paper roses. And give ready-made diagrams and templates for do-it-yourself paper roses. We will start with the fastest ways (that even a child can do) - that is, the lesson is suitable for kindergarten teachers and primary school teachers. And then we’ll move on to more complex techniques for making paper roses. You will also find here workshops on making large roses from paper, suitable for decorating holidays and wedding ceremonies.

Let's start making paper roses with your own hands. But first, let’s make a small digression and see what practical application your future rose crafts will find.

Paper roses

For all occasions.

Paper roses can decorate your gift wrapping. Moreover, you can make your own cardboard packaging with your own hands. Below I give a drawing of a box in the form of a piece of cake with paper rose cream.

You can use paper roses to serve the table at a romantic dinner, anniversary, or wedding.

Paper roses can become part of the festive decor at a wedding. Roses can become a bride's bouquet. Such a bouquet will be nice to keep for the friend who caught it.

You can give a bouquet of such roses to your loved ones and friends. Wrap it in music paper and decorate it with dew drops from ordinary Soviet SILICATE GLUE.

You can decorate a wall in your house with them or decorate a holiday. Run a wire along the wall and tie paper roses and leaves onto it.

THREE FAST WAYS

Make a rose out of paper.

For those who are in a hurry, at the very beginning of the article I include the three fastest ways to make a rose with your own hands from paper. These methods already have stencil templates. You need to quickly trace, cut and assemble the rose.

The first method is to string layers of rose petals onto string (or wire). Each layer is 2 petals (opposite in vector). Between them in the central roundel there is a hole made with a hole punch.

Here's the diagram. You can place a piece of paper directly on your monitor screen. The diagram will be visible on the surface of the sheet. Quickly trace the outline with a pencil. Cut them out - and now you have the blanks in your hands.

Now you need to do:

3 pieces of the first size,
2 pieces of the second size,
2 pieces of the third size,
and the middle part (No. 4).

I drew the middle part small, it didn’t fit on the diagram– you can leave it like this, or you can increase it. You can draw it yourself - in fact, it is an ordinary snail, one side of which looks like petals drawn by hand. Draw a spiral, snails, and then outline it with petal arches.

Or you can enlarge it on the screen MPa - to do this, press and hold the Ctrl key with one hand, and with the other hand, rotate the mouse wheel away from you (this will make the picture enlarge a little) - achieve the desired degree of magnification - and trace this enlarged part onto a sheet of paper.

By the way, you can tint the details with watercolors, walk through the browns of the petals - so that the rose has shades and halftones. This way it will look more natural.

The diagram for assembling a paper rose is shown in the photo below.

Step 1. First we string it onto the hole three big details– we move them relative to each other so that the petals spread out in a circle. And we fix it with glue, glue the round middle parts of the part together.

Step 2. Then we string 2 pieces of second size– cross to cross, petals on 4 sides.

Step 5. On top of the glued rope we place our snail spiral, which can be slightly twisted in your hands and wrapped so that it fits into a petal twist.

Step 6. On top of this twist draw the center of the rose with a marker. Or glue bead. Or cut any paper stamen. Or roll it up crumpled piece of colored paper and insert like a paper bead in the center. That is, use what you have on hand.

Terry paper rose.

You can also take any shape of petals and also change their size to get a template for a new rose with your own hands. Here stencils for shaggy roses with uneven edges of paper petals.

Lush rose with rounded petals.

Here in the picture I painted over the petals specifically- as a hint that you can make a rose in which the color of the center smoothly flows to the edges - from dark pink to light pink, as happens with some varieties of natural roses.

You can increase the size of the template by pressing the Ctrl button on your keyboard and rolling the mouse wheel away from you (or towards you to make it smaller).

And then place a sheet of paper on the screen and trace the translucent design with a pencil.

2 ways to make a rose

Made from crepe paper

We cut the paper into rectangles. Then we place these rectangles on top of each other with their corners (as in the figure below). Each time we put a drop of glue under the bottom - so that in this linear installation all the parts are glued to each other at the corners. As a result, we got a toothed tape.

In the photo, this rose contains candy inside. But this is optional. You can use a ball of crumpled paper. And so, around this lump we begin to wrap our jagged tape. As a result, we received a bud.

Now we need another toothed belt - but from semicircular parts. Tape with rounded teeth. We wrap the bud with this rounded ribbon of petals - and we get a plump, lush paper rose.

Here's another quick way to make a rose using crepe paper.

We fold the papers into even wide folds - so that they do not move relative to each other, we fasten them with a stapler.

We cut out a petal from this fold - large, medium, small - we get a pack of petals of each size.

We make blanks from green crepe paper.

We make a cocoon around the wire from a strip of crepe paper. When the cocoon is thick, we begin to shape the petals - we spread each one with glue in the lower part.

We start with small ones, move to medium ones and end with large ones. We get a lush paper rose from crepe corrugated paper.

As you can see, a rose is also quickly and easily obtained. A good way for those who have stocked up on crepe paper.

From the manner of arranging rose petals, and it depends on their shape, what kind of rose you will get. Here in the photo below we see roses, also created in the same way– but they look a little different. Because the shape of the petals is different.

In nature, there are a variety of roses - you can see that they differ in the shape of their petals. You too can develop your own varieties of roses from crumpled paper. If each petal is crushed, squeezed at its top, then we will get a new rose bud, a half-closed, rumpled terry variety.

Well, now let's move on to the painstaking techniques of creating a paper rose. There will be more complex, less fast ways to make a paper rose. But this is only for the first time. Once you gain experience, you will be able to twist such roses with closed hands - quickly and without fuss.

Paper rose

FROM TWISTED STRIP.

If you take an ordinary STRAIGHT strip of paper, you can wrap it in a rose. Just start wrapping it around the toothpick. First we make the winding with a regular roll. And then we continue to wrap the paper tape around itself with a TWIST.

That is, the tape simply twists - with an oblique bend. We make twists as we wrap the ribbon around the stick.

Take any unnecessary sheet of paper (draft) right now, cut a strip and try to twist it like this. Practice a couple of evenings - and one day you will figure out exactly how to twist the ribbon in the BEAUTIFUL way - how often to make twist turns, at what angle.

And also – using the same technique – you can also fold a rose from a straight strip of CREPE PAPER. Fold the long strip carelessly along in half. And wrap it around the base stick in the same way. It will work out lush delicate paper rose.

Ball-trees in a pot are decorated with such roses. A foam ball is covered with crepe roses and stuck into a pin sticking out of a flower pot.

Here is a rose twisted from a red and green napkin. Fast and easy.

Paper rose

SPIRAL METHOD

(and 4 of its varieties)

You can take not direct strip of paper - and spiral paper strip. And then we will get a new rose model. Like this one.

But this model is complex - it’s a bit difficult to twist and glue it. There is nothing for ordinary pva glue to cling to - although it works, you need to hold it with your hands for a long time. It is best to use glue from a hot gun in this model - then the work will go faster.

Here is a master class that shows how to make such a rose from paper. On a sheet of cardboard we draw a spiral-snail. Cut it out. And we begin to twist it around the stick. PLEASE NOTE the twisting does not start from the middle end - but from the edge.

This method of making a paper rose there are modifications- that is, slightly modified options. Let's look at them.

Modification of the spiral method No. 1 – PEAL.

We start twisting and assembling the rose in exactly the same way - not from the central edge of the spiral - but from the outer edge.

The arches of the petals on such a spiral rose DO NOT HAVE TO BE ROUND. You yourself can change the shape of the edge and get new varieties of paper roses.

For example, here is a template with jagged Jagged EDGES of pink petals. Or a rose with a sharp petal.

Modification of the spiral method No. 2 – SQUARE.

And here another modification of this method make a rose out of paper. Here our spiral is not round - but square - and even with uneven edges. And this is the rose that comes out of it. Uneven as if alive, recently blossomed wild Rose.

Modification of the spiral method No. 3 – ADDITIONAL PETALS

And here is a spiral rose, which is pasted around the edges with lush convex petals.

Step 1. Making a spiral rose. This will be the middle of our future lush rose.

Step 2. We prepare flat petals - 4 pieces of each size (small, medium, large).

Step 3. Cut each petal at the bottom. And we place the edges of the cut on top of each other, on the glue. This is how the petals become convex.

Step 4. Cover the rose with petals, first smaller ones, then larger ones.

Modification of the spiral method No. 4 – LACE

And instead of a spiral shape, you can take a ROUND one. And also roll the round strip into a rose.

And to make it more elegant, you can take this round strip from a lace paper napkin, as in the photo below.

You can also cut the same rose not from paper - but from felt, or even from a fluffy washcloth.

PAPER ROSES

From toilet paper rolls.

Here is a master class where a rose is made from recycled cardboard.

Step 1. A six-petal template is cut out of plain paper using the snowflake method. That is, we fold a square sheet as for a snowflake and cut it in a semicircle). We unfold it and get a flower.

Step 2. Cut the toilet paper rolls, flatten them on a wet towel - press them, then dry them

Step 3. We transfer the template to the sleeve paper - then we roll up the rose. The first layer is in a tight bud. We design the other layers as lush rose petals made of paper.

ROSES FROM PAPER

SNOWFLAKE method.

I called this method a snowflake because the beginning of creating such a rose coincides with the beginning of cutting out a snowflake from paper. Here, too, you need to fold a sheet of paper into four, and then into a triangle. And cut out a semicircular module from it - when you unfold it, you get an octagonal flower.

Cut out 4 octagonal flowers. These will be 4 tiers of our future rose. Each tier needs to be changed.

In the upper tier we remove 4 petals with scissors (4 remain)
In the second tier we remove 3 petals (5 remain)
In the third tier we remove 2 petals (6 remain)
In the fourth lower tier of the rose, remove 1 petal (7 remain)

Now you need to glue these trimmed flowers into cups - to do this, we place one marginal petal on the second marginal petal - with glue. We get cups - 2 petals, 4 petals, 5 petals, 6 petals.

We bend the petals of each cup using a round pencil. We put the cups on each other. At the bottom we glue a green paper bottom to them - they are attached to it with glue.

We fold the leaves into a fan. Forming a flower.

And using exactly the same method you can make a rose from the same roll of toilet paper.

In this way you can create any type of paper rose. With torn petals, with round petals, with pointed ones.

Large paper rose

TECHNIQUE OF INDIVIDUAL PETALS.

You can make a large rose - where each petal is the size of an A4 sheet. We buy colored office paper – a whole pack. We cut the petals into different sizes. We make each petal convex - for this we make a cut in its lower part with scissors - and glue the sides of the cut overlapping each other.

Then we collect the colors on a round paper base. We cut a folded sheet of paper into a fringe - and roll it into a roll - YOU RESULT IN A stamen of a rose.

Depending on the shape of the petals, you can get different shapes of paper roses. Below you can see how your imagination can create new pink flowers.

The same color of paper can create an interesting composition of roses if all the flowers are of different shapes and sizes.

Here are some ready-made templates for such large paper roses. YOU can come up with your own petal shapes. And see what comes of it in the end.

In such roaa it is not necessary to make a TWICE STAMINA. Can be done spiral rose center(lesson earlier in this article).

Or you can make the middle in the form of a DENSE BUD. In the master class below we see just such a rose. And you can see How exactly is such a boot assembled? it is made of a cross-shaped petal shape . Each side has a cross and rises up and crumples into a bud.

You can make a large rose for a beautiful photo portfolio. Buy a pack of pink office paper and collect your own unique paper rose - so big and lush.

And from the scraps of this office paper make the roses smaller. They can decorate the holiday table. Or paste over the mirror frame. Use as decor on gift wrapping. You can also make an artificial bouquet from these paper roses.

Moreover no matter what shape you have leftover scraps of paper. To make such a rose, it is not necessary to take petals of a SYMMETRICAL SHAPE. You can twist a rose from irregularly shaped petals.

Cut it out three petals in the shape of a heart(these will be the edge petals). We cut each of them at the bottom - and put the cuts overlapping each other - on glue.

And then we glue such convex petals to each other.

Three other half-shaped petals– we roll them into a roll – on top of each other. We glue the roll into the middle of our first three petals using strips of paper. We get a rose.

These are the ideas for paper roses that I have collected in this article. Now you have become an expert in this matter - and you understand perfectly well that you can do all this with your own skillful hands. So get down to business and let your world bloom with lush roses of happiness.

Happy paper roses.

Olga Klishevskaya, especially for the site

If did you like this article
And you want to thank our free author for this painstaking work,
then you can send any amount convenient for you
on his personal YaD wallet - 410012568032614

Of course, fresh flowers never cease to amaze with their perfection. But, unfortunately, beautiful bouquets cannot please with freshness and fragrance for too long. In return, you can enliven the interior with an original composition, which will decorate the room for a long time. To do this, try making something with your own hands, for example, from paper. There are many ways to make the queen of flowers - the rose. Let's look at the two most accessible and simple ones. Below is how to make it easily - simple and corrugated.

Creating a three-dimensional composition from buds

It is more traditional to make a standard bouquet of several flowers on stems with leaves (photo 1). This method will be presented below in this article in the description of working with corrugated paper. But try to make something unusual too. A composition in the form of many small buds that are fixed on a base cut in the shape of a disk will look very original (photo 2). The composition can be formed in two types - flat and volumetric. In the first case, all the flowers will be on the same level. But a voluminous craft looks more extravagant. So, let's take a closer look at how to easily make a paper rose.

Material and tools used

To work you will need simple colored paper. At the same time, it should be quite dense and colored on both sides. The color scheme can be completely different. But the best option is definitely to choose shades from pale pink to purple-burgundy. To design the layouts, prepare a simple pencil, ruler and scissors. During the production of buds and to secure them to the base, quick-drying glue (such as “Moment”) is useful. It is best to use cardboard material as the “frame” of the craft, which will hold its shape well when paper products of a certain weight are attached to it. This is especially worth considering if you are choosing a technology for making three-dimensional crafts. An additional inner layer will be added to the total mass. For it, you can take whatever is suitable at hand (taking into account the need to further roll it up into a roll): a piece of fabric, padding polyester, soft paper or newspaper. An excellent solution would be to cut out a blank of the desired shape from polystyrene foam, which is a very light material. The final piece is a light, wide ribbon on which the product is hung on the wall.

How to make an easy paper rose? Bud manufacturing technology

Cut a square from a sheet of paper.
Then, marking a point in the center, begin drawing a spiral line. In this case, the distance between the sides of the turns should be approximately 1.5-2 cm.
Cut out the workpiece, moving along the line. Leave a small circle untouched in the center (photo 3).
Start twisting the bud from the outer end, placing the ribbon tightly into the cylinder.
After the flower is fully formed, loosen the layers somewhat.
Finally, glue the middle part of the tape from the bottom to the resulting product to secure the shape.
Make as many buds as needed to fill the available space based on the craft.

As you can see, paper roses are very easy to make. It's very easy to do the job step by step, isn't it?

Composition design

Having prepared the required number of flowers (photo 4), proceed to assembling the craft. To do this, first make a base from cardboard (or from packaging boxes) in the shape of a circle of the required size (50-60 cm). Then cut a hole inside it with a diameter of 10-15 cm. After this, firmly attach a layer that gives volume to the base (rolled padding polyester, paper, etc.), and begin to paste flowers over the workpiece. Sprinkle the finished composition with glitter varnish and tie with ribbon. As you can see, this description of how to make an easy paper rose will help even a child make an original craft. The main thing is to follow the instructions provided and apply a little effort and patience.

How to make flowers from corrugated paper (roses)?

A bouquet made using a different technology turns out to be more believable. Prepare pink and yellow corrugated paper, a pencil, scissors, glue and thread for work. You will also need wire and paper in green shades for the rose stem. On pink paper, draw several petal templates of different sizes, cut them out, and then use the templates to make the required number of flowers (photo 5). And from the yellow one, make a “stamen” - a rectangle of several layers, cut on one side in the form of a fringe. As a rule, in order for a flower to turn out lush, at least 20 different petals are required. Then begin the step-by-step assembly of the flower - from inserting the center to gradually obtaining a bud by layering the petals (photo 6). Once fully formed, rosebuds made of paper are secured at the bottom in a circle with threads and decorated with green paper. At the beginning of work, you can immediately insert a wire into the middle - the future stem.

Bouquet decoration

Using green paper, make leaves. Then, starting from the bottom, wrap the prepared long strip around the wire, moving in a spiral. Closer to the bud, place several leaves at a short distance from each other. Make at least 5-7 flowers, each of which may differ in size from the previous one. Compositions of fully opened flowers in combination with buds that have not yet fully blossomed look very natural. This original bouquet of paper roses will decorate any interior. And the final touch can be “flavoring” the composition - sprinkle the flowers with your favorite perfume.

When spring comes, we want to decorate our home with fresh flowers: miniature bouquets of snowdrops and the first forest flowers take place on the dining table, delighting us with their appearance and delicate aroma, but even in winter we want to decorate our home with flowers - that’s why we can fulfill DIY paper roses. If we use dense material for flowers, then the flowers will be stored for a long time without losing their beauty. In order to get a bright bouquet, you can use not only paper, corrugated paper or napkins, but also other materials, for example, creating flowers from beads is popular, but this type of creativity is only available to experienced craftsmen.

How can you use paper flowers? Firstly, to decorate your home, they can be placed in a vase or basket. Secondly, they are often used to decorate gift boxes or cards. Thirdly, it can become an element of festive table setting.

Deserves special attention unusual DIY paper roses- Kawasaki flower, which is made using the origami technique. A true master of this oriental art of working with paper sheets, Toshikazu Kawasaki is the author of the rose folding technique using a square sheet. In this craft, we do not need scissors (just to get a square sheet) and glue, and the bud will be made only by sequentially bending and folding a paper sheet.

Beautiful DIY paper roses

They are extremely popular among crafts. beautiful roses made from paper with your own hands. The paper flower turns out to be very delicate; it can be used in home decor, to create cards, and to decorate gifts for any occasion. Anyone can make such a flower, even a preschool child, but first you need to watch master classes on several simple methods.

The first method can be called the simplest; it will allow you to make a neat rose in a few minutes. And if you make a lot of such buds, you can make a bright spring bouquet that will delight you for a long time. The original use of such flowers is to decorate a gift box with their help; they can replace a lush bow.

For such a rose we will need thick red or pink paper, although you can make the flower in fantastic colors - blue or purple. The main tool for making all paper crafts is scissors; if a child is working on a craft, then he should be offered stationery scissors, whose tips are not sharp, but at the same time they cut paper perfectly. For fixation, we will use PVA glue, because it glues paper elements just fine, and even if a child spills glue or stains the surface with it, it can be easily washed off with warm water.

At the base of each rose there will be a paper square, its dimensions are 10 by 10 cm. For a smaller flower, accordingly, a smaller square will be needed. Now you need to draw a spiral on the square: it should start in the very center and end when the spiral reaches the edge of the square. You need to cut in the opposite direction, starting from the edge and until you reach the center.

As you can see, DIY paper roses quickly can be done, because this spiral is the basis for our rose, and now all that remains is to twist it. The core needs to be twisted more tightly, you can add a little glue to make it stick. The other end of the spiral must also be secured with glue.

As a stem we will use a dry tree twig, decorated with two green leaves, which can also be cut from paper. Several of these roses can take place in a vase, which will become a stylish decoration for your home in any weather, especially in the winter season, when there is a shortage of fresh flowers and bright colors.

DIY paper roses quickly

Another way, how to make paper roses with your own hands, will also not take up much of your time. We will need the same set of materials as for the previous craft: thick paper of any color, glue and scissors. Instead of glue, you can use adhesive tape, with which you can quickly glue the paper together without waiting for the glue to dry.

A sheet of thick A4 paper must be folded in half lengthwise, and then in half again, again lengthwise, so we will draw the sheet into four stripes, all that remains is to unfold it and cut along the fold lines. It is convenient to cut paper using a stationery knife, but working with such a sharp tool will be unsafe for a child.

The cut strips must be glued together to form a long strip of paper. The ends of the strip must be glued together with glue or adhesive tape. This strip will become the basis of the future bud: let's start twisting it on one side, we need to get a dense core, and the rest of the strip should be folded in half and wrapped around the center, as shown in the photo tutorial. By wrapping layer by layer around the core, you will get a beautiful bud. You can make such a rose even from a white sheet, and paint the tips of the petals with paints.

DIY paper roses: master class

If this is your first time doing DIY paper roses, master class This tutorial on how to create buds from crepe will definitely come in handy. In addition to two sheets - green and red, you will also need a wooden stick or skewer for the stem, which can also be made from wire. Floral tape is used to decorate the stem. To draw the outlines of the petals you will need a pencil, and to cut them out you will need scissors.

The petal in this case will have the shape of a heart, since we need to cut out six identical hearts, we will need to make a template. The finished template on thick cardboard should be traced six times and then cut out. The size of the template depends on how large you want your flower to be. In this master class, the height of the heart reaches 15 centimeters.

If you use thin wire or wooden skewers for the stem, it is advisable to fasten the three pieces together so that the stem is strong. You need to decorate the stem with floral tape, and if you can’t find floral tape, you can use a thin satin ribbon and glue to secure it.

Now we need to start shaping the petals: first, you need to stretch them wide with your fingers; crepe allows you to give the elements a concave shape, which is very convenient if you want to create a realistic bud. Next, we will need a pencil, onto which you should wrap the top edge of each workpiece.

Next, you can form a bud: first, wrap the first petal around the stem and secure it at the bottom with tape or glue. Then, in the same way, you need to use the remaining petal blanks, wrapping them around the core.

But these are only the petals of our rose, and for it you should make another cup, using green corrugation for this. You need to cut a strip from the corrugation, then twist it into a spiral and slightly press in the middle. The petals should be glued in the center of the cup.

When we have several flowers on a stem ready, we can make a bouquet, to decorate which we will also make small green leaves. The leaves should be attached to the curved stem, and when arranging the bouquet, you will tie the leaves with floral tape to the main stem.

Unusual DIY paper roses

Sometimes, to create beautiful and unique DIY paper roses, photo templates may be needed. On the Internet you can find suitable blanks that need to be printed on a printer. In the photos of the master class you can see what template we will need; you can draw it yourself on paper.

Scissors, wooden skewers, glue and a pencil are additional materials that we will use in the process of creating a beautiful flower. The paper we need should be thick enough, painted on both sides. Using a color printer, you can print colored blanks on a white sheet.

After you have printed them, you need to cut out all the petals and leaves. The ends of the petals should be bent using scissors. It is necessary to bend on both sides, and bend the leaves in half lengthwise. All petals on the printout are numbered; the numbers indicate the order in which the petals need to be attached to the skewer.

The petals need to be twisted sequentially around the base, fixing them with glue until they are formed.

DIY paper roses

The most popular material to make is corrugation. Its advantages include the fact that it is very thin; due to its wavy texture, the petals can be given a natural shape. Children enjoy working with corrugation; it is easy to cut with scissors and glue together.

This is not only a decorative element for your home, but also a wonderful gift for a loved one. A homemade candy bouquet will be an excellent gift for a teacher, but children must take part in the creative process.

We will need green and pink corrugations, but you can make buds in yellow, white or bright red. Scissors and glue will become additional tools for completing the craft, and we will use wire instead of stems. We will need as many pieces of wire as you want to make flowers for your bouquet.

You can make a flower by combining several shades of red: from a light pink center to bright red edges. Since the corrugation is very thin, it can be cut by folding it in several layers, so all the petals will be the same size and for this there is no need to prepare a template and trace it on the sheet several times.

The corrugated sheet should be folded several times in length, then in width, we will get a rectangle of a suitable size for creating petals. we will create heart-shaped petals that should be cut out, so at one time we will cut out eight blanks at once.

To give them a natural look, you can straighten them a little with your fingers and stretch them towards the bottom. From the green corrugation, cut a strip 3 cm wide, with which you need to wrap the wire, fixing it with glue. On one side we need to wind a spiral of green corrugation, which will become a cup for our future rose. Next, you need to form a bud by layering the petals.

Greetings. Let's continue the topic. We recently made crafts, and today I want to create the queen of flowers - a rose. It looks very good in any interior and on any application.

It is often made to decorate gifts or holiday decor. For example, large voluminous roses can decorate a wedding, birthday or International Women's Day, and also become the main decor for a photo zone.

I have selected the most understandable master classes, following which step by step, you will definitely succeed. There are easy options that can be made with children, and there are more complex ones that need to be created carefully. But absolutely everything is doable, so let's get started.

I think that starting from school, most children have done origami at least once. Even in its simplest form, for example, they did or.

Making a flower is a little more difficult, but it is quite possible for both a schoolchild and an adult. Today I will share with you 4 step-by-step diagrams that show you step by step what needs to be done to make a rose.

So, the first diagram is in front of you. For it you need to take a square sheet, you can cut an A4 landscape page. I advise you not to use small sheets if you are just learning this technique.

The second diagram is incredibly detailed. She describes each step that needs to be done in order for you to get this flower.

Origami does not involve the use of glue and scissors. But in this case, we will need to make more beautiful leaves, so we will give them a little shape at the last stage.

The following diagram shows how to make a rose from modular origami. This option is interesting, but also more labor-intensive than the previous two. Also, each step is described in detail, which will be convenient for those who are just beginning to hone their skills in this technique.

I suggest you watch the video in which the master makes an unusual beauty that also curls up into a cube. This idea interested me, so I’m sharing it with you.

You can use not only colored sheets, but also newspapers.

Volumetric rose made of corrugated paper with a candy inside with a template

It is now popular to make wonderful sweets with a surprise from corrugated paper. The whole craft is wrapped around a candy. And most often such compositions are created for gifts. These roses look like real ones and are not very difficult to make.

I will give three instructions on how to make such beauties. They differ in the shape of the petals. By this I want to show that the chosen shape and size will greatly change the appearance of the flower.

In addition to corrugated, you can use crepe; it is also great for the techniques described. For one rose you need to cut three different petal shapes. The widest goes to the outer layers. And the narrowest ones create the middle and wrap the candy.

1. The necessary details are in front of you.

2. Each petal needs to be stretched in the middle and the edges should be curled with your fingers. They have already become like real ones.

3. We begin to wrap the candy.

To ensure that all layers adhere better, use hot glue to secure the bottom of the parts.

4. Layer by layer we apply the parts and fix the end of the bud with thread to keep the candy inside well. But this needs to be done by wrapping the bottom of the flower with wire or a kebab skewer. They will act as a stem for us.

This is what the result looks like from above.

6. Open the petals.

The next master class is very similar in the sequence of stages, but has a different shape of petals. Three sizes are also used here, but they all have the same shape.

I suggest trying to make flowers from unusually shaped parts.

There are two types of them used. One of which is a perky heart.

For one rose you need at least five petals, the more there are, the more fluffy and open it will be.

If you do it without candy, then immediately attach the first petal to the wire with hot glue.

We stretch all the parts a little in width, they become concave and we curl the edges to make them more similar to the real ones.

We begin to collect the bud. First we take narrow and then wide prepared parts.

For those who do not have professional materials for such products, I advise you to use the same crepe or corrugated paper to wrap the stem.

If you use several shades, you get bright and beautiful compositions.

To make the flower more realistic, select sheets of several shades of the same color, from dark to light, so you can create a natural gradient that all plants have.

How to make a paper flower with children?

The easiest way to make a craft with kids is to use napkins. They already have the required dimensions and are easy to roll and glue.

I offer an idea on how to quickly make a rose without glue.

Decorative napkins also provide several variations in how to fold the craft. The flowers turn out delicate and delicate.

Another simple option is to use a template. You draw a wavy spiral, cut along the outline and roll it, straightening each layer.

The same technique is shown below, but its difference is that the edges of the workpiece become frayed. They fold inward and thereby create a fluffy center.

Using the same spiral technique you can make slightly different flowers.

To do this, a template is drawn separately and cut along the lines. Do you see that the petals are more clearly defined here and there is a smooth edge?

Cut it along the contour.

And fold it from the end, correcting the outer petals.

You can finish the product with your fingers. The child will definitely be able to twist the part.

It is advisable to fill the bottom with hot glue so that the spiral does not unfold. This rose has the most beautiful and realistic petals than the results of previous versions using the spiral technique.

And one of the simplest options is to cut out a very ordinary spiral. Usually they start with this option, because it does not require any special skill at all.

I think that you liked the ideas and you will be able to create a beautiful decor.

For example, you can decorate a panel like this with flowers made using the techniques described above.

How to easily make a flower in five minutes with your own hands?

Incredibly beautiful buds can be made in just five minutes. And for this we will need corrugated paper again. We need a long strip five centimeters wide. The longer it is, the more blooming the flower you will get.

So, we bend the edge, turning it out a little, as in the photo.

We do this along the entire length of the strip.

And we begin to twist it.

Don't forget to fix the edges.

Another fun and quick idea is created from tissue paper. It is thin and translucent. But it allows you to make voluminous crafts.

1. We need a rectangle, centimeters long and 7 centimeters wide.

2. Fold it in half so that the edges match.

3.And wrap the resulting workpiece around your finger with the fold upward.

4. Secure the bottom with a stapler and straighten the layers.

5. We will need a lot of these buds.

What creative people can’t come up with! For example, make beauty out of egg trays. It’s both environmentally friendly and looks amazing. All instructions are shown in the diagram.

Another quick rose idea. True, it is more labor-intensive than the previous ones, but it will not take more than fifteen minutes for an adult.

If you don't have such shaped staplers, cut out the parts by hand. But such assistants are sold in most office supply stores. And the kids will definitely appreciate such a purchase.

We will need parts of the same size, but with different numbers of petals. Therefore, we take three parts and make cuts in each. For the first we only cut one line, for the second we cut out a petal, for the third we remove two.

Roll up each piece and cut off the bottom.

Glue each piece together and see if your result is similar to the image.

We form the center from the cut petal, attaching it to the wire. Then we insert this part into the trefoil, then into the middle blank.

The outermost will be the largest. We remember that all layers need to be secured so that the craft does not fall apart.

This option works well from thick sheets or cardboard. It will be especially beautiful if you take a sheet with texture or reliefs. By the way, all these options can be repeated from felt. If suddenly you have such a desire.

Master class on a large paper rose for beginners with diagrams

Popular now. They are made in different sizes, from standard to full size. These crafts are used to decorate photo studios, photo zones, decorate the interior, and simply give to each other.

This big beauty is made from crepe paper. Remember, above we looked at several options for petals that can be cut from corrugation? So, here we need heart-shaped parts.

The process is the same when creating ordinary flowers. We stretch each petal in width and bend the ends. A bud is assembled, around which layers of petals are glued.

For the stem, you can take a wire whose width corresponds to the volume of the bud. Of course, the thin one will not withstand it.

Here's a beauty for large spaces.

The craftswoman shows you the whole stage step by step. And it is almost the same as the previous one. But the details are many times greater.

All layers must be glued together, otherwise the petals simply won’t hold on under their own weight and will fall apart. You may need a whole pack of glue sticks because the parts are large.

Any woman can make such crafts. And then put your creation to decorate the hall or living room.

For large volumes, one roll may not be enough for you, so buy at least two of them.

Beautiful flower using quilling technique

Quilling has several directions. For example, there is laying out flat modules on the surface of the drawing. The results are bright and delicate compositions, but I will not describe this method today; it requires complete immersion in the technique. Today we will deal with a voluminous rose.

This option can be repeated with satin ribbons. You've probably already seen similar fabric flowers on brooches or other clothes. The sequence of actions is the same, but we use different material.

If you find it difficult to repeat the steps according to the scheme, then I suggest you watch the video in which the master shows how to fold the strip.

All the options I've given are beautiful and will help you out if you need to quickly decorate a gift or create decor for a holiday. And it’s also worth teaching children such wonderful creativity.

One of the most beautiful flowers is the rose. This plant amazes with its multi-layered structure and pleasant aroma. This type of flower culture decorates all holidays and celebrations. Many shades allow you to choose the right option for a particular occasion.

Recently, paper floristry has become especially popular. These flowers will never wither or lose their original appearance.

Beautiful handmade roses are used to decorate a photo zone, as a small gift or as interior decorations.

What can you use to make a beautiful rose?

Modern materials make it possible to produce any paper composition that will not leave anyone indifferent. These are mainly: cardboard, corrugated and colored paper, thin wire.

Paper rose using origami technique

How to learn to make roses with your own hands? For this, several methods and techniques have been developed that guarantee the desired result.

One of these is origami. It is suitable for both adults and small children. Here it is necessary to follow the sequence of straightening and bending the paper web at the desired angle.

The Internet provides detailed instructions on how to make roses with your own hands. To make crafts, it is recommended to purchase special paper. It is soft and flexible during the work process.

The technique includes several points:

Fold the double-sided sheet in half. From the resulting rectangle we make a square measuring 21 cm x 26 cm.
Next, bend the figure in half. As a result, we get a triangle. Unbend the side and move to the other corner. The end result should be a convex triangle.
We bend the unfolded square with its edges diagonally.
After this, we make connections on the sides. The result is a double triangle.
All 4 corners are folded towards the center point.
We fold the resulting sharp protrusions in half again.
We tuck each subsequent corner into the middle.
The result is a neat triangle with a hole at the bottom.
Next, straighten the resulting petals. The photo of a homemade rose shows the entire sequence of actions.

Rose made of colored paper

Unusual ideas and methods for making roses at home are amazing in their diversity. A flower made of colored paper has won universal recognition among novice needlewomen. This material is perfectly amenable to deformation and any manipulation. Two techniques have been developed for the production of paper decor.

The first is to roll the spiral part in a circular manner. For this you will need:

scissors;
a sheet of red paper;
glue stick.

On the reverse side we draw a large spiral. It should be 20 cm in diameter. After this, cut out the resulting drawing. The result is a “curly” rose element.

At one end you need to twist the future flower bud. Continue twisting until the entire spiral is neatly deformed. The result is a beautiful blank that can be used for crafts or decorating flat surfaces.

The second method for a decorative flower made of colored paper is to use thin strips. The product turns out to be delicate and neat.

For this you will need:

double-sided paper;
strong glue;
scissors;
ruler;
simple pencil.

On the sheet we draw a line 45 cm long and 5 cm wide. After this, carefully cut out the resulting blank. We fold one corner and glue it in the form of a small triangle. This will be the reference point of the product in the future.

When the edge dries, we begin twisting from the other end. The result will be a rose with faceted petals. It can also be used as a decorative design for the walls and ceiling of the interior space.

Corrugated paper rose

We bring to your attention a detailed master class on how to make a rose with your own hands. This type of material is soft and has beautiful textured lines. They add elasticity to the paper structure.

To make this flower you need to prepare:

corrugated paper in red, yellow and green;
scissors;
petal and leaf patterns;
glue stick;
thin wire.

On the red and yellow sheet we begin to trace the patterns in order. The inner petals will be a delicate shade, and the outer petals will be a rich color. When the blanks are ready, carefully cut them out and begin to form a rosebud.

We twist the internal elements with each other until we obtain the characteristic textured line of the flower. We superimpose each subsequent detail on the previous one. As a result, we get a multi-layer structure that imitates a real plant.

At the top of the flower we glue a thin wire. Next, we begin to wrap it in spiral movements. The density of the material will add naturalness to the future design of the paper rose.