Which fan is better to put in a manicure table. Manicure extractor that removes odors and dust from the desktop. Extraction from a computer cooler: step by step instructions

The workplace of a manicurist requires order and cleanliness. During the processing of nails, especially when using a manicure device, a lot of dust and dirt is generated. Cleaning all this all the time is quite problematic, but in this case a modern solution comes to the rescue - an extractor hood (vacuum cleaner for manicure). This device works almost silently, but at the same time effectively eliminates a large amount of dust. Installing a manicure vacuum cleaner facilitates the work of the master and makes the process more comfortable for clients. We will tell you how to make a hood with your own hands at home, as well as how to choose a manicure vacuum cleaner when buying.

How to make a desktop manicure hood with your own hands

A manicure vacuum cleaner is not only a salon tool. Many modern masters work at home, so they also need this device. You can not only buy a desktop hood in a professional store, but also make it at home with your own hands. This will require a few improvised materials and tools, as well as knowledge of the basic principles of creating a device.

Extract from the cooler

The first popular way to make a hood is from a computer cooler. In this case, you will need basic ideas about the technical device of the processor. So, to create a vacuum cleaner, we need:

A simple computer cooler is the basis for creating a manicure vacuum cleaner

The switch on the power cord will simplify the operation of the device

A manicure hood built into the table is much more convenient and practical. It does not take up additional space on the surface and does not interfere with the workflow. To create it, you will need almost the same tools and materials as in the manufacture of a vacuum cleaner from a cooler. You need to additionally use only a simple pencil and a hacksaw. The procedure is as follows:

The hood built into the countertop is convenient and practical

Video: do-it-yourself built-in hood for a manicure table

How to choose a manicure vacuum cleaner

In professional stores, you can also purchase both types of hoods: portable and built-in. Each master chooses an option for himself based on personal preferences. At the same time, before buying, you need to familiarize yourself with several basic rules for purchasing vacuum cleaners for manicure:

1. Pay attention to the power of the engine. The larger it is, the better the hood will cope with dust. A high-quality vacuum cleaner draws air flow at a distance of at least 20 cm.
2. Make sure that the vacuum cleaner handles not only dust, but also toxic fumes from varnishes and paints.
3. If you prefer mobility, then you should choose a portable hood. The device should be with a slight slope for the convenience of the client.
4. Determine how busy the vacuum cleaner is.

For a salon with a large number of visitors, you will need a powerful unit with a large dust collector. For home use, you can choose a more modest model.

A portable manicure hood should be with a slight slope

Popular manufacturers of manicure hoods

The following manufacturers should be considered when buying a manicure vacuum cleaner:

Thus, the hood is an indispensable thing on any manicure table. These devices are used both in salons and at home and are designed to fight dust and toxic fumes. Vacuum cleaners are built-in and portable. Both types can be either purchased at the store or made by hand.

Professional beauty salons, where nail care procedures are performed, cannot do without such a necessary thing as a manicure vacuum cleaner. Many women purchase it for use at home.

Why is it needed?

Polishing and polishing of the nails on the hands and feet is not complete without the formation of dust - the remnants of horny tissue, dried manicure varnishes and paints. The latter contain many harmful chemicals - solvents, pigments, carcinogens. Small particles floating in the air enter the lungs, which can cause allergies, asthma, tracheitis and other respiratory diseases.

They negatively affect the skin, eyes, lead to headaches. Therefore, it is so important to clean the workplace from dust after each procedure.

In addition, the workplace itself in a nail salon should look perfectly clean and tidy. If the respiratory tract can be protected from harmful dust with a gauze bandage on the face, then only a manicure vacuum cleaner can handle the rest of the problems. Such devices facilitate the work of the master and give the nail salon more representativeness.

Principle of operation

Regardless of the type of manicure vacuum cleaner, they all work due to an electric motor that rotates the blades at a high speed of 2500-3000 rpm, due to which the air, together with the dust present in it, is drawn into the hood and enters the bag-shaped dust collector. It needs to be cleaned from time to time, but there are also disposable plastic containers, which, after filling, are simply thrown away and replaced with new ones.

The principle of operation is not much different from a conventional household vacuum cleaner, but there are certain differences. The device for a nail salon should be compact, not heavy. If it is built-in, then the dimensions should allow it to be placed on the table. The mass of these units usually does not exceed 2 kg, the noise level is not more than 48 dB, the engine power is 20-30 W. With such characteristics, it will not interfere with either the client or the nail master, saves energy and is easy to carry if the model is not built-in. Such devices are powered by a 220 V household network.

Varieties

There are several types of nail vacuum cleaners, all of them have their own characteristics and advantages.

The hood is the most popular model of such vacuum cleaners. It has a plastic case with a powerful fan, the speed of rotation of the blades can reach 3000 rpm. High-quality models are made almost silent, the noise level in them does not exceed 62 dB, which provides a comfortable environment in the nail salon. Dust enters the removable dust bag, after use it is easily removed from the outlet pipe and replaced with a new one.

There are 2 options for such hoods: built-in or portable. The first type is tightly mounted in a manicure table, the front panel of the blade and fan are located horizontally or at a slight angle. During the procedure, hands should be held directly above the hood; for safety, the fan is closed with a protective grille. The advantages of built-in models of hoods are high power, the absence of unnecessary vibration, and the convenience of working on a rigidly fixed device. The disadvantages are the inability to move the device to another place and the need to mount it on a table, cutting a hole in the tabletop.

photos

Portable hoods are a small panel with a vertical fan that is connected to the network through a regular power cord. The advantages of this type over built-in appliances are that they can be moved to any place, the main thing is that there is an outlet in the vicinity. The case is made of plastic, the fan is covered with a metal protective grill, and the weight usually does not exceed 1.5 kg.

A separate option is a floor hood for manicure, which has a lot of power. and is able to cope with any amount of dust in a short time. A massive housing with an electric motor, a fan and a dust collector is installed on the floor, and an exhaust hose goes from it to the workplace. Despite the highest cleaning efficiency, the floor hood consumes more power and takes up a lot of space in the cabin.

There are very convenient desktop models of manicure vacuum cleaners in a cylindrical body. They have 5 holes at the top for each finger. After processing the nails, the brush is placed on such a vacuum cleaner, each finger takes its place. So you can comfortably hold your hand on the stand for a long time. The appearance of such devices is very elegant and original.

What to look for when choosing?

Before buying a nail vacuum cleaner, it is necessary to take into account criteria such as engine power and speed, noise level during operation, weight and dimensions. Be sure to pay attention to the presence of a protective grill, it should prevent the tightening of small objects and protect fingers during procedures. The power of the device should be such that it is able to draw in an air-dust stream at a distance of 15-20 cm. A good vacuum cleaner can save the room not only from harmful microparticles, but also from the strong smells of varnishes and solvents.

Built-in models should be chosen only if the final interior of the salon is thought out and no redevelopment is foreseen. In this case, it is necessary to provide a socket near the device.

For convenience and mobility, it is best to choose a portable hood model with a plastic case. It is easily placed on any horizontal surface, takes up little space, does not require installation. The most successful solution would be models with an inclined palm rest, they will allow the client not to feel discomfort during a long manicure.

Depending on the workload of the device, it is worth choosing the right volume of the dust collector, determining how often you will have to change filters and plastic dust bags. For large salons with a constant influx of visitors, it is worth buying a powerful outdoor unit, and for a house, a portable hood in a plastic case with small dimensions.

The time of continuous operation also plays an important role, many of these devices have limitations on this value. Some devices have additional useful features: timer, automatic start or bright backlight. For a prestigious beauty salon, such bonuses will be important. You should also pay attention to the length of the power cord, it should reach the nearest outlet.

In addition to the technical characteristics of the hood for manicure, an important aspect is the manufacturer. It is necessary to choose proven companies that have proven themselves in the market of cosmetic products. It is worth considering some brands in more detail.

Popular Models

Manufacturer Max Since 2011, it has been supplying the market with manicure products and devices that are of high quality and popular among women. Manicure hoods « Max Storm», « Max Ultimate»are presented in several varieties, all vacuum cleaners are guaranteed for 18 months.

The Max Storm dust collector hood has a stylish white body with a palm rest. The kit includes interchangeable 3D dust bags, they are multi-layered, that is, they provide maximum insulation and do not tear. The device is portable and can be easily installed on any horizontal surface. The front part with a ventilation grill and a palm rest are located at a slight angle, this model is called an "hourglass".

Technical characteristics of the device:

• engine power - 32 W;
• noise level during operation - 40 dB;
• blade rotation speed - 3100 rpm;
• productivity - 164 cubic meters. m/hour;
• dimensions - 280x350x155 mm;
• weight of the device - 964 g.

With such speed and power, the Max Storm hood copes well with any amount of dust, it works so silently that it allows you to speak without raising your voice.

In addition to this product, Max presents built-in hoods for nail salons "Max Storm" and "Max Ultimate", a portable hood " Max Ultimate 2» and a powerful device specifically for pedicure with a footrest.

Powerful portable vacuum cleaner Emil X2» with a 60 W motor will provide clean air at any intensity of procedures both in the salon and at home. They have an hourglass shape similar to the Max Storm hood and excellent technical characteristics. With a fan speed of 3100 rpm, this device has a capacity of 400 cubic meters / hour, the noise level emitted during operation is 62 dB.

The body is made of glossy white ABS plastic, pleasant to the eye and touch. Keeping your hands on the stand for a long time will be very comfortable. To protect fingers and prevent small objects from falling into the fan blades, there is a chrome-plated grille on the front panel. Dust is collected in two-layer white bags. The device is switched on using a push-button switch located on the 220 V power cord.

Russian manufacturer " Ultratech» occupies a high rating in the market of goods for manicure and pedicure. They are presented with cute-looking multi-colored models of manicure vacuum cleaners with a plastic body. Models « Ultratech SD-117» with a power of 24 W provide reliable dust extraction with virtually silent operation. The dimensions of the device are 265x315x130 mm, weight - 1.95 kg. Products come with a six month warranty.

Portable vacuum cleaners "Ultratech" are made of colored plastic, which is protected from the action of solvents and other aggressive substances used in manicure. Available in red, yellow, purple, beige, black and white. The fan is closed with a chrome grille, the device is turned on with a button on the front panel, the standard cord is 220 V.

Hood « Air Magic» from ECO is a powerful device with a floor arrangement. It is suitable for large salons where regular intensive ventilation is required. In addition to dust, it eliminates the sharp unpleasant odors of chemical solvents. In addition to the massive white floor housing, the device is equipped with an exhaust plastic hose-pipe, the end of which is located above the workplace.

The dimensions of the hood are 700x350x350 mm, weight 18 kg, so you need to choose the place of its installation in advance. The noise level is relatively low for such power - only 40 dB. The device allows you to effectively clean the air in the room by 80-90%. The kit includes special double cleaning filters that are easy to replace.

How to do it yourself?

Making your own exhaust device for manicure / pedicure is quite simple. Its main part - a 30-60 W electric motor with blades is found in many devices. It can be an ordinary kitchen or desktop fan, a computer cooler. The main thing is to choose a suitable power supply with the appropriate voltage for such a unit. A kitchen hood fan sold in hardware stores already has a power supply with a transformer; for operation, it only needs to be connected to a household network.

If the manicure hood is made from a computer cooler, then you should choose a suitable unit for it, their standard voltages are 5 and 12 V, observing the polarity.

After choosing the main working part, it is necessary to think over the reliable intake of air and ensuring the removal of dust. For a portable vacuum cleaner, you can use plastic, wood or other material that can be easily processed, the main thing is to cut a hole for the fan housing and fix it securely. Soft, easily processed material is also needed in order to fix the protective grille on the front panel of the hood.

A flexible plastic hose is put on the back of the fan, you need to choose the right diameter. It is displayed in the dust collector from any improvised materials.

If you decide to make a stationary nail vacuum cleaner yourself, then you can use flexible corrugated acrylic or plastic hoses for the hood, which are easy to find on sale.

A convenient solution would be to lead such a hose directly to the street or to the ventilation shaft. This eliminates the need to constantly change dust collectors.

Manicure vacuum cleaner is an obligatory item on the table of a nail service master. It is needed to collect dust when filing natural nails, extended nails or before applying gel polish.

A professional vacuum cleaner is able to protect the manicurist from the following troubles:

• Allergy.
• Shortness of breath, difficult breathing.
• Polluted air in the office.
• Pain in the eyes from the ingress of dust particles during filing and hardware manicure.
• Settling of dust on furniture in the room, clothes.

The presence of a vacuum cleaner on the master's desk shows that the salon cares about the health of customers, the tidy appearance of the premises and the professionalism of employees. It is imperative to buy such equipment if manicure services are provided at home - children and relatives of the master suffer from nail dust and small residues of decorative substances. One of the most prominent manufacturers of this equipment in the Russian market is Max

Principle of operation

On the upper part of the body of the vacuum cleaner there is a grill, under it there is a fan. The device is connected to the network and sucks in air. The filter bag cleans the air that has entered the device from dust, particles of nail treatment products. Clean air is released into the room. Dirt and small fractions settle in a dust collection container - a bag. After filling the bag, the container is cleaned. The device is ready for a new cycle of operation.

Types of vacuum cleaners for manicure

Dust suction devices during nail treatment are divided into several types according to the following criteria:

Compact and larger models are produced. To work at home or in a small salon, it is enough to buy a vacuum cleaner with a size of 330x310x160 cm.

Installation location

Floor, desktop. Overall models with a pipe for dust extraction are placed under the table. A compact portable version with a bag fits on the table.

Mobility

Built-in, portable. The built-in version is more expensive, but has more power, is compact and inconspicuous on the table. Portable models also serve as a stand for the hands of customers. You can take them with you on the trip to the customer's manicure home, put on the table in the salon. The body surface is made of non-slip plastic, so customers' hands do not slip off. The device takes up little space on the table, is removed to the side after use, the bag can be easily removed and cleaned. Average power - 65 W, low noise - 50-55 dB.

How to use

After purchasing a vacuum cleaner, you can start using the appliance immediately. Perform the following manipulations:

1. Attach a dust bag to the fan.
2. Place the vacuum cleaner on a flat surface.
3. Turn the fan grill towards the client, the bag should be next to the master.
4. Turn on the device in the network, press the start button. The mains voltage must be 220 V.
5. Adjust the power. First turn the knob to the maximum position, then decrease if necessary.
6. Make sure that the bag is tightly fixed, there are no unnecessary objects on the fan, dust does not fly out of the bag.
7. Bring the client's hands to the grill, hold at a height of 1-2 cm from the top of the device. Start filing.
8. After finishing work, turn off the device with the button, unplug the cord from the mains.
9. Wipe the top of the case with a clean cloth, clean the bag.

How to care for your device

A manicure vacuum cleaner requires careful maintenance. It is necessary to clean the bag and wipe the body after working with each client. The basic principles of care are the following simple recommendations:

• Remove dust from fan blades, protective cover.
• Shake out the bag daily or after each manicure session.
• Wash the dust container as needed. You can use a delicate machine wash (water temperature - 40 ° C) or a hand wash.
• Wipe the case after unplugging the vacuum cleaner from the mains with a soft, damp cloth.
• Solvents, acetone or other aggressive cleaning agents must not be used to clean the vacuum cleaner!
• Change the dust bag every 1.5 months (with active use) or every 3-4 months (if you use the vacuum cleaner once a week).
• In the event of a problem, contact an appliance repair technician.

The process of carrying out a manicure is always accompanied by a large amount of dust, which is formed both from sawing off the nail plate and when removing the coating. Despite the fact that the particles are not visible to the eye, their negative impact on human health should not be underestimated. This is especially true for people with respiratory diseases or allergies. To combat microscopic particles, many nail salons use special devices - hoods that can collect all the dust in the master's working area. But what to do at home, because the purchase of such a device is far from affordable for everyone. In this case, a nail vacuum cleaner can be made by hand.

Circuit drawing

Manicure hoods do not have a complex design, and therefore self-production does not require special skills. The main thing is accuracy and patience. The frame of such a device consists of several main elements, which are indicated in the drawings below.

In order to connect the fan, you must follow the diagram:

What will be required

In order to independently make a fan for manicure, you will need:

• plywood blanks, 1 cm thick, according to the drawings above;
• leatherette, 35 cm wide;
• related tools (screwdriver, soldering iron, pliers, scissors, brush, tongs);
• fasteners;
• foam rubber;
• glue gun;
• glue;
• fan;
• gasket for the fan;
• ventilation grille;
• 12 V power supply;
• reciprocal connector for the power supply;
• button;
• bag for shoes.

Device assembly process

The manufacturing and assembly procedure consists of several stages:

1. First of all, leatherette is cut out from plywood on the side blanks, with an allowance of 1 cm along the edges. After that, using a glue gun, the material is glued to the body parts.
2. The side parts of the body are assembled with screws and a screwdriver. On one side, a hole is made for the button. Next, the edges of the parts are additionally glued with a glue gun.
3. A piece with parameters of 46 × 24 cm is cut out of foam rubber, which is glued to the upper parts of the case. After that, a hole for the fan is cut in it.
4. Additionally, a piece is cut out of the leatherette, which corresponds to the parameters of 52 × 30 cm, and is attached to the case with a glue gun.
5. The fan hole is cut with scissors, leaving about 1 cm of material around the edges, which is then glued to the back of the hole using glue and a glue gun. The most convenient way to do this is with incisions around the entire hole.
6. From the inside, a gasket for the fan is glued to the hole, after which the upper part of the case is attached to the sides with screws.
7. A button is fixed in the side hole. All gaps are treated with a glue gun.
8. A fan is installed from inside the case and fixed with screws, after which a ventilation grill is installed on top.
9. The wires coming out of the fan are soldered to the switch toggle switch. Also put two wires (output) on the connector for the power supply. In order for the wires not to interfere, they are glued to the inner side of the vacuum cleaner body.
10. A shoe bag is fixed on top of the inside of the fan, which will act as a garbage collector.

How to embed in a table

In addition to portable models of manicure vacuum cleaners, there are also stationary models that are immediately built into the table. To make such a hood at home, you will need:

• fan;
• fan grill;
• corrugated pipe;
• bag to collect dust and debris.

The assembly process is not very difficult:

1. On the table, determine the location of the ventilation grill, after which a hole of the desired size is cut out.
2. A fan is fixed under the table top.
3. From below, a corrugated pipe is attached to it, at the end of which a shoe bag (or any other one made on a non-woven base) is placed.
4. A grid is fixed on top of the fan.

Expert opinion

Nikolai Petrovich

Subpage for an expert

If necessary, you can install a design of several fans at once, which will significantly increase the power of the vacuum cleaner.

You can make your own hood for manicure quite quickly and without much effort. The main thing is to pre-prepare all the necessary tools and materials. In addition to convenience, in this case, you can get significant economic benefits. After all, a purchased vacuum cleaner for manicure is a rather expensive thing, which, however, cannot be dispensed with.

Those who are engaged in manicure know that when removing gel polish, a large amount of dust is always formed. Dust particles adversely affect the health of both the master and the client.

To reduce this impact, many use special devices - vacuum cleaners or hoods that can draw in dust particles.

You can buy such a device for several thousand rubles, or you can simply and quickly do it yourself.

To make a vacuum cleaner for manicure, we need:

1. Fan (cooler) from an unusable computer power supply.
2. Network adapter for 9-12V.
3. A bag or cloth made from a non-dense material.

Description of the manufacture of the vacuum cleaner

I had a burned out computer PSU with a large fan. For our device, just what you need.

Understanding BP. Remove the fan cover. We cut one side to get a slope, like a factory-made vacuum cleaner. See photo:

Here's what happened:

On the cut side, so as not to be cut off on sharp edges, and on the opposite side we put on the tubes cut along the length (cambric or something similar) and glue it. They will also be legs. You can not cut off the side, but bend it inward.

Then I came across a bag from some purchase made of loose fabric and the size suitable for a fan.

That's how quickly and inexpensively a wonderful home-made vacuum cleaner turned out, not inferior to expensive factory ones!

If desired, you can make a home-made more beautiful case, add a switch, voltage regulator. You can find or buy a fan powered by 220V - it will still cost less than buying a new vacuum cleaner.