Knitted shoes are super moccasins. Beautiful and cozy slippers-moccasins with your own hands! Detailed description of the work Moccasins crochet

We start with the sole.

Knit the sole as follows: cast on a chain of 10 loops, then make a single crochet in 2 loops from the hook and the remaining 8 loops in stb, and you have 9 loops, that is, stb. It was row 1.

2.3, 4, 5.6 row we make an air loop and then in each column, or (loop) we knit 1 stbn.

7 row we make an addition: we knit one stbn in the next 4 loops in the 5th loop we knit 2 stbn further 1 stbn in the remaining 4 loops, that is, you should have 11 stbn

8 row and 20 knit in each loop for 1 stbn and that 11 loops in each row, but do not forget to make an air loop at the beginning of each row.

21 rows in the first 4 loops, one stbn each, then in the 5th and 6th loop, 2 stbn each and the remaining 4 loops, 1 stbn each.

22 row of 26 air loops and dalia in each loop for 1 stbn and that 12 loops i.e. stbn.
27 row we make a decrease, we knit the first five loops of 1 stbn, and we knit the 6th and 7th loop together stbn, the next 5 loops of 1 stbn each should turn out 11 stbn

28 row air loop and in each loop 1 stbn total 11 stbn

29 row we make a decrease as follows: we knit the first 4 loops by 1 stbn, then 5,6,7 we knit the loop together with one stbn, the next 4 loops by 1 stbn, it should be 9 stbn

30 row 1 stb in each loop and you should have 9 stb

31 row again decrease: the first 3 loops are knitted by 1 stbn, the next 4, 5, 6 loops are knitted together with one stbn and then the last 3 loops are 1 stbn each. You must have 7 stbn

32 row, 1 stbn in each loop, as a result, 7 stbn. This was the last row of the foot. Do not cut the thread.

Dalia we tie the sides of 1 stbn. 35 stbn should come out on the side, then 1 stbn on the heel and there should be 7 stbn, the next side again 1 stbn each, as a result there should be 35 loops in the sock where the first column is done stbn. next loop pstb. the next 3 loops, one dc each, then pst and the last loop of stbn
We complete the work. You should have 78 stitches in the circle. We tear off the thread. The foot is ready (oh, sorry, when tying on the heel there should be 9 stbn).
Mark 12 points where you will decrease as shown on the slipper.

Now let's move on to the sides. We knit like this. Make a connecting loop, that is, attach the thread where you will make a strap or (I don’t know how to do it in Russian) And then we make 2 air loops and start knitting towards the heel. We hold the seamy side to you, that is, to the face.

1 row: 1 pst in each loop behind the back wall of the loop, that is, it will be a loop that is towards you, but where you have outlined, we make a decrease, i.e. 2 loops with one pst, and so in a circle, as a result, you should have 66 pst, connect with 2 air loops . Do not break the thread, continue to knit.

2 row: 2 air loops, unfold the knitting and knit 1 pst in each loop. We consider the air loops as the first pst, as a result, we connect 66 pst with 2 loops on the air column.

3 row: we make 2 air loops, Air loops are considered as the first pst. We unfold the knitting and in the first loop we make a half-column not for the loop, but for the previous column. the next loop pst and so on until the end of the row in and toga you should have 66 pst 33 of them pst for the loop and 33 pst for the front post we connect with 2 loops on the air column.

4 row: We make 2 air loops, turn the knitting and knit 1 st in each loop at the end of the row we connect with 2 loops on the air column, why the column and because every time you make 2 air loops it is considered that the first st should be 66 pst.
5 row: in this row we begin to make a strap in this row we do not turn knitting. 2 air loops. We consider the air loops as a pst, the next will be a pst for the front walls of the previous pst. farther pst for the loop and so we alternate to the place where you have the label of the strap. We make 2 air loops and turn the knitting, then we knit in the direction of the heel, 1 pst in each loop to the next point where you have planned a strap. We do not break the thread
We make 2 air loops and turn knitting 1 stitch behind the front wall of the previous stitch. 1 pst, 1 pst for fart, 1 pst, 1 pst for fart and 1 pst. It turns out 6 plst. we make 2 air loops and turn the knitting repeating from * We knit such 6 rows. We make 1 air loop and knit stbn in each loop for a total of 6 columns. We break the thread.
from the second row, knit for both loops
toe
cast on 8 stitches
1 row: in the 2nd loop from the hook your first stb, the rest of the sts to the end of the row.

2 and all subsequent rows, knit stbn, and do not forget to do air at the beginning of each row.

When you tie the length you need, tie in a circle exactly as the sole was tied, only in the corners knit 2 stbn in one loop.
This is for rounding.
I don't sew. and I knit with a connecting loop for both loops that are on the tongue and on the basis, that is, on the side.
8 loops are for all sizes, but I’ll pick the length myself, but if you want, I’ll send you the translation as in that scheme
According to the description, then you must knit 11 rows of 7 stbn and then tie as I said before.

Here are such wonderful knitted moccasins on the sole that lasievna offers to knit and shares with us a detailed master class.

So, I knit for my daughter, this is size 38, it doesn’t matter, we will follow the pattern. The yarn I have is Cotton Gold from Alize, 330 m in 100 g in two additions and one thread of Lily for strength. It turns out that I have one single crochet with a size of 5 * 5mm. I knitted tightly, hook Clover No. 3, the usual 1.5 mm metal. Whom the yarn is different in size, we go according to the pattern. Slippers are ordinary, Kislovodsk, such in Fix Price cost 50 rubles.

We cut off the fabric and pierce the sole along the edge at a distance of 5 mm in a circle along the upper edge for tying. Then we take a nylon thread (or main thread) and tie the edge of the sole. To do this, from the outside to the inside, we thread the hook into the hole, grab the thread, pull it out to make a loop.

Then we drag another loop from the adjacent hole and knit them together.

We repeat this action in a circle, we fix the thread, I just tied the beginning and end and cut it off. Then we take our yarn for moccasins and tie the sole in a circle under the resulting arches to a height of 2 cm in rows with a lifting loop. We cut the thread and hide it.

Now we measure the sole in length, at half the length we put markers on both sides. Mark the center front with a marker. We measure the widest part of the foot on the sole, take half and measure in both directions from the marker in the middle. This will be our toe. I got 9 loops (4.5 cm). We knit for the back halves of the loops (internal in our case), at the end we need to climb to the next row. To do this, we knit two connecting posts in the next two loops and turn the moccasin with the heel towards us, we knit the second row in the opposite direction. Again, in the next two loops of our side we knit 2 connecting posts, they end all rows. Knit more carefully!!! Otherwise, your moccasin will blow up to the Aurora cruiser by the end of knitting, it is better to write down each row according to the number of loops. From the third row, we begin to add loops in the front rows to expand the toe, in each first and last loop we knit two columns instead of one, in the wrong rows we knit without changes.

We knit our toe with increments to the markers, then we start the tongue. We knit 2 cm without increments (I have 4 rows), we begin to cut, I cut the loops three times on both sides through the row, that is, I cut the loops in the front rows. Then I got a tongue width of 7 cm, knitted another 3.5 cm (7 rows) without changes, close the loops, remove the thread. We tie the tongue with columns without a crochet.

We start knitting a back. We measure 3 cm from the connection of the toe with the side towards the front of the moccasins. We knit for the front halves of the loops along the tongue, then the rest of the heel for both halves of the loops in a circle around the heel (sorry for the pun), turn and knit in the opposite direction from the marker to the marker one more row. Then we decrease one loop, a single crochet, over the next two single crochets we knit 2 air loops (this is a hole for the lace), then we knit single crochets. For 4 columns before the end of the row, we knit 2 air loops, after 2 columns without a crochet, another column, we do not knit the last column for reduction. In the opposite direction, we knit all the loops with single crochets. It turned out two pairs of rows, with and without a hole. We alternate pairs so that we get 3 holes on each side, the last pair of rows - without a hole.

For the lace, I knitted a chain of 90 cm air loops, adding Italian lurex. For those who want to knit exactly according to the photo, you need to measure for the heel not 3 cm, but 1.5 cm towards the toe, the reductions are the same as in my case, only without holes. Then, on the side of the harness, we knit a row of single crochets, in the second row we leave places for holes for the lace, the third row is single crochets. At the junctions with the boot we make connecting posts. We tie the heel with a crustacean step, thread the lace. For knitting on the insole, everything is the same, only the insole is pierced from the bottom up.

Save so you don't lose.

Good day, dear needlewomen. Home comfort depends on many things. But if there are cool slippers at hand, which are also knitted with their own hands, then nothing threatens comfort. Cozy do-it-yourself moccasin slippers with a description are waiting for you today.

Everyone can knit such slippers if desired. To do this, you only need a description, threads, a hook and knowledge of your size.

For beginner craftswomen, a useful cheat sheet:

How to crochet moccasin slippers step by step diagram

Sole

Knit the sole as follows: cast on a chain of 10 loops, then make a single crochet in 2 loops from the hook and the remaining 8 loops in stbn. In total, you have 9 loops, that is, stbn. It was row 1.

2.3, 4, 5.6 row we make an air loop and then in each column or (loop) we knit 1 stbn,

7 row we make an addition: we knit one stbn in the next 4 loops, in the 5th loop we knit 2 stbn, then 1 stbn in the remaining 4 loops, that is, you should have 11 stbn.

8 row and 20 knit in each loop 1 stbn, total 11 loops in each row, but do not forget to make an air loop at the beginning of each row.

21 rows in the first 4 loops, one stbn each, then in the 5th and 6th loop, 2 stbn each and the remaining 4 loops, 1 stbn each.

22 row of 26 air loops and then 1 stbn in each loop, total 12 loops, that is, stbn.
27 row we make a decrease: we knit the first five loops of 1 stbn, and we knit the 6th and 7th loop together with stbn, the next 5 loops of 1 stbn each, it should turn out 11 stbn.

28 row air loop and in each loop 1 stbn, total 11 stbn.

29 row we make a decrease as follows: we knit the first 4 loops by 1 stbn, then 5,6,7 we knit the loop together with one stbn, the next 4 loops by 1 stbn, it should be 9 stbn.

30 row 1 stb in each loop and you should have 9 stb.

31 row again decrease: the first 3 loops are knitted by 1 stbn, the next 4, 5, 6 loops are knitted together with one stbn and then the last 3 loops are 1 stbn each. You should have 7 stbn.

32 row, 1 stb in each loop, in the end 7 stb. This was the last row of the foot. Do not cut the thread.

Parties

Next, we tie the sides of 1 stbn. 35 stbn should come out on the side, then 1 stbn on the heel and there should be 7 stbn. The next side is again 1 stbn each, in the end there should be 35 loops in the sock, where we make the first column stbn. Next loop pstb., the next 3 loops one stsn, then pst and the last loop stbn.

We complete the work. You should have 78 stitches in the circle. We tear off the thread. The foot is ready (oh, sorry, when tying on the heel there should be 9 stbn).

Mark 12 points where you will decrease, as shown on the slipper.
Now let's move on to the sides. We knit like this. Make a connecting loop, that is, attach the thread where you will make a strap or (I don’t know how it is in Russian, sorry). And then we make 2 air loops and begin to knit towards the heel. We hold the wrong side to you, that is, to the face.

1 row: 1 pst in each loop behind the back wall of the loop, that is, it will be a loop that is towards you, but where you have outlined, we make a decrease, that is, 2 loops with one pst and so on in a circle. As a result, you should have 66 pst, connect with 2 air loops. Do not break the thread, continue to knit.

2 row: 2 air loops, unfold the knitting and knit 1 pst in each loop. We consider the air loops as the first pst, as a result, we connect 66 pst with 2 loops on the air column.

3 row: we make 2 air loops, air loops are considered as the first pst. We unfold the knitting and in the first loop we make a half-column not for the loop, but for the previous column. The next loop pst and so on until the end of the row. As a result, you should have 66 sts, 33 sts for the loop and 33 sts for the front post. We connect with 2 loops on the air column.

4 row: We make 2 air loops, turn knitting and knit 1 st in each loop, at the end of the row we connect with 2 loops on an air column, why a column? Because every time you do 2 chain stitches, count this as the first stitch, it should be 66 stitches.

5 row: in this row we begin to make a strap, in this row we do not turn knitting. 2 air loops. We consider air loops as pst, the next will be pst for the front walls of the previous pst. Next, pst by the loop and so alternate to the place where you have the label of the strap. We make 2 air loops and turn the knitting, then we knit 1 pst in each loop towards the heel to the next point where you have a strap. We do not break the thread.

We make 2 air loops and turn knitting * 1 pst for the front wall of the previous pst., 1 pst, 1 pst for the previous pst, 1 pst, 1 pst for the previous pst and 1 pst. * It turns out 6 pst. We make 2 air loops and turn knitting, repeating from * We knit such 6 rows. We make 1 air loop and knit stbn in each loop, in the end 6 columns. We break the thread.

From the second row, knit for both loops.

toe

Cast on 8 stitches.

Row 1: In the 2nd loop from the hook, your first sc, the rest of the sc to the end of the row.

2 and all subsequent rows, knit stbn, and do not forget to do air at the beginning of each row.

When you knit the length you need, tie in a circle exactly as the sole was tied, only knit 2 stbn in one loop in the corners. This is for rounding.

I do not sew, but knit with a connecting loop for both loops, which are on the tongue and on the base, that is, on the side. 8 loops - this is for all sizes, but I choose the length myself.

According to the description, you must knit 11 rows of 7 stbn and then tie, as I said before.

How to crochet moccasins video

Subscribe to updates and visit us more often. See you soon!

There have been a lot of knitted shoes on the site lately, but each MK has its own nuances that can come in handy, so my hamster drags everything he sees here! (S.Z.)

Master class on sleeper moccasins from the author Oksana Urenko. Thanks for the detailed tutorial!

Slippers came to fashionistas from the home wardrobe. Translated from English, slippers are slippers that only rich aristocrats could afford. Initially, these are men's shoes, but women around the world have long appreciated the convenience and practicality of slippers. Semi-closed shoes with a flat sole, in the area of the instep, without laces, zippers or buckles - it is not surprising that now they are worn "to the feast and to the world" not only by men, but also by women. Slippers can be worn with almost any outfit, as you can easily choose the perfect one from a wide variety of materials and colors.

To create you will need:

1. Hook number 2

2. 100% cotton yarn called Narcissus and Soso

3. Sole (if there is no sole, Oksana suggests taking the sole from the sneaker)

And so let's get started ... We take the sole, pierce holes through 0.5 cm. We knit two rows with single crochets ...

Then we mark 11 middle loops. In the first loop we make one air loop and knit another 10 loops, as a result we get 11 loops ...

Now we insert the hook between the loops, as in the photo and pull out the loop, we knit the resulting loop with the loop on the hook ...

Like this ... And we knit two loops together.

Then we insert the hook again between the columns and simply pull the thread into the loop ...

Wrong row: insert the hook into the second loop from the hook and knit to the end of the row ...

Now we knit each row: we enter into the second loop from the hook and knit to the end ...

We knit to the desired width. For size 39 and a narrow leg, 31 loops are obtained ...

In order for the pattern to be openwork and with double crochets later on, it is advisable to finish the row like this: stretch the thread through the loop and draw it through the main loop ...

and you can link this option ...

Oksana took this pattern ...

Finish the row, insert the hook through the loop, then pull the thread through the loop ...

We knit with a pattern to the desired height. To align the pattern, knit on the front side single crochet, counting the loops, knit 3 rows ...

We knit the heel 14 rows ...

Knit the last row of the heel together with the toe ...

Now the binding...

Tie with a crustacean step ...

Moccasin slippers are ready!

Moccasins have always been considered the most comfortable, lightest shoes. We will crochet slippers using the principle of the structure of moccasins.

Let's start knitting with a triangle, which is called the outer toe. Then we knit the sides and the sole. In each detail, we start counting the rows from the first row.

Slipper size 37-38.

Materials and tools:

For work, I took bulk yarn 100% acrylic in three colors.
Hook number 3.5.
Scissors and tapestry needle.

Abbreviations used in the text

VP - air loop;
runway - air lifting loop;
RLS - single crochet;
CCH - double crochet;
PS - a magnificent column.

Description of work

sock

Outer toe We start knitting from the base of the triangle. We collect 15 VP.

1 row. 3 runways, in the fourth loop from the hook we knit a magnificent column: it consists of knitted 3 runways and two double crochets, knitted in half. Then we knit 3 loops on the hook in one go. We get the first lush column with a common top. Further, in each row, we knit the first magnificent column in this way. Then we knit ** 1 VP, skip one loop of the previous row, and in the next loop we knit a magnificent column of 3 CCH with a common top **. We repeat the pattern between the stars so that 8 magnificent columns are obtained in a row. In the last loop of the PS, we change the color of the yarn, we do not cut the working thread of the first row.

2 row. 2 runways. We knit lush columns in this row between the PS of the first row, introducing a hook under 1 VP. After each magnificent column we knit 1 VP. Lush columns are arranged in a checkerboard pattern.

3 row. Change the yarn color to orange. And we knit 6 lush columns in this row.

4 row. Again we pick up a dark green thread and knit 5 lush columns.

5 row. We knit four lush columns with a light green thread. At the end of the row, cut off the light green thread and switch to the orange thread.

6 row. We knit three lush columns with an orange thread. And go to the dark green thread. In total, for this size, seven rows should be connected and in the last row there are two magnificent columns.

Borders

When the triangle is ready, you can start knitting the sides. We introduce a hook on the right side of the triangle, pick up the thread and knit 35 VP. The number of loops depends on the size of the foot and the thickness of the yarn and hook, but in any case, it should be odd. We attach a chain of air loops to the second side of the triangle with a connecting loop.

1 row. We knit the sides with double crochets. We knit 2 runways, we knit the first double crochet into a loop, from which we knitted lifting loops. On a chain of air loops we knit 35 CCH.

We lay the free "tails" of the cut threads along the row and knit them into the canvas. When we reach the top of the triangle, we knit 3 CCHs from the side of the row, 3 CCHs into the arch between the lush columns, 3 CCHs on the other side of the row.

We continue to knit 3 dc on each side of the row. When we knit the third column of the last side, we knit only a crochet, then we insert the hook into the first column with a crochet of the beginning of the row and change the color of the yarn to orange.

2 row. 2 runways and 1 SSN in the same loop. Next, we knit columns with a crochet in each loop of the previous row.

In the toe part, we also knit without additions.

3 row. Enter the third color. 2 runways and 1 SSN in the same loop. Do not forget to tie the free ends of the thread into the fabric so that the wrong side is clean.

In the toe part we knit without additions. We do not cut the dark green thread.

The board is connected. Fold the workpiece in half, find the middle of the back and toe.

Mark the center of the heel and toe with a marker or thread of a contrasting color.

Sole.

We start knitting from the place where we finished knitting the side.

1 row. 2 runways and knit with double crochets to the middle of the heel, marked with a contrasting thread. We knit 3 CCH with a common top: in each column we knit a loop with a crochet.

We knit 4 loops on the hook in one step.

In the toe part, we also knit the central three columns with a lush column with a common top.

We knit a row to the end with double crochets. We close the row with a connecting loop into the second lifting loop. This is the first row of the sole.
2, 3 and 4 rows knit as the first.

Cut the thread and fasten.

Take a tapestry needle. Having fixed the thread at the beginning of the row, we begin to sew the workpiece with a seam over the edge. We capture both parts of each loop with a needle.