Connecting rows in circular crochet. Circular knitting: Circular pullover without yoke. Knitting in the leg of the column

All products knitted in a circle from the bottom up, before the start of the armholes, are basically the same - a pipe is knitted in a circle. At this seam point, you can apply any of several methods to complete the part.
You can knit the yoke by connecting all the details and working in a circle up to the neck, or knit the front and back parts separately to form any armhole, and sew in the sleeves later.

Circular knitting of a pullover without a yoke from the bottom up: step 2

When knitting in the round without a yoke, start at the bottom edge, placing a marker at the beginning of the circular row indicating an imaginary side seam. (when stitches are to be added at the side seams, a second marker is not needed until the beginning of the armholes.)

Circular knitting of a pullover without a yoke from the bottom up: step 3

By dividing the product before the armholes into front and back pieces, you can start modeling the armholes in the division row or in the next row. It's a little easier to separate the loops first and then start shaping the armholes. If you are dividing sts without an overlay, start at the left side seam marker and work to the opposite end of the front. Place a second marker at the midpoint of the fabric to mark the right side seam, if you haven't already done so. Remove the loops on the holder, leaving the loops on the knitting needles for knitting the back of the product.

Circular knitting of a pullover without a yoke from the bottom up: step 4

To form an armhole on the split row at the first marker, cast off the desired number of sts for armholes, work to the second marker and slip on the holder as described above. Bind off the back armhole sts on the next two rows. Continue to work back in straight and reverse rows, as on straight needles, using extra yarn.

Circular knitting of a pullover without a yoke from the bottom up: step 5

To knit the front, return the loops back to the knitting needle; Start at the right side seam and work the first row from the wrong side. This is a very important point, especially if you are knitting a relief pattern or modeling as you work. If you formed an armhole on the split row, remember to bind off the armhole sts on the right side seam on the first purl row.

So, in the previous lesson, we learned how to crochet a circle in a spiral with single crochets. But this is not the only way to crochet a circle. In some cases, for example, if the product is knitted in multi-colored stripes, the fact that the beginning and end of the row are obtained at different levels can be inconvenient. Many patterns also cannot be beautifully knitted in a spiral. In these cases, circular knitting is used with connecting posts and lifting air loops. For brevity, we will refer to this method as: crochet in a circle.

In this lesson, we are using a slip loop as the starting ring. See here:. The circle will be knitted with double crochets.

Important: in order for the circle to be even and flat, it is important to correctly determine how many columns need to be connected in the first row. In the previous lesson, we knitted a circle with single crochets starting with 6 stitches. But the number of columns in the first row is not always constant: it depends on the height of the column and on the manner of knitting. So, over time, each knitter develops her own knitting characteristics: for some, the leg of the column is shorter and denser, for some, the loops are freer. If you get, for example, that when knitting with single crochets, the circle is tightened around the edges and it turns out not flat, but convex, then you need to dial not 6, but more in the first row, for example 8 columns. The height of the double crochet is approximately twice the height of the single crochet - which means that there should be twice as many columns in the first row - 12.

So, form a sliding loop, which will be the initial ring in our case. We knit 2 lifting air loops. We mark the loop on the hook (it will be the first in the next row) with a marker.

Now we knit 11 double crochets in a loop: in the front row we get 12 columns, including lifting loops. We close the circle by knitting a connecting column into the first loop marked with a marker.

Knitting in a circle - we close the first row with a connecting column

For the formation second row again we knit two lifting air loops, move the marker so as not to lose the beginning of the next row, and we knit two columns with a crochet in each loop. In the second row you should get 24 columns, including lifting loops.

So we knit circle after circle, we do not turn the work over. We make additions according to the circle rule: in each next circle, the number of columns between additions is one more. In the second row we knit two columns in each loop - we get 24 columns, there are no columns between additions. In the third row, we do the addition through one column, we get 36 columns. In the fourth - after two, we get 48 columns; and so on. We will get that in each row we will add 12 columns - the same as it was in the first row. Lifting loops are considered a column.

is a way to improve your neat knitting skills. Needlewomen often have a problem with shifting the seam when knitting in a circle with double crochets, and also this seam is too noticeable. And it is precisely this problem that we propose to solve today in three main ways. After all, we often knit many things in a circle - hats, socks, mittens, vests, dresses, bags and more. And I would not want the seam to spoil the impression of the finished product. Join now!

1. Turning rows

Video lesson on an even seam when crocheting in the round using turning rows:

Description of the knitting progress:

We collect the required number of loops, close in a circle.

We collect 2VP, instead of the usual 3x, corresponding to the height of the SSN. So the beginning of the row will look neater.

We knit the usual row of CCH in a circle.

We knit a connecting loop at the end of the row into the second lifting loop.

We unfold the canvas with the wrong side towards us. We collect 2VP and knit now in the opposite direction with double crochets.

We continue knitting, alternating rows. Those. we knit from the front, then from the wrong side.

The result is an even seam, but the pattern will be slightly different from the usual look. Those. knitting will be more embossed. The light pink sample shows this method.

2. Knitting in the leg of the column

With this method of knitting, the seam turns out to be perfectly even, but the knitted fabric itself turns out to be a little stiff.

Video lesson on an even seam with circular crochet by knitting into the leg of the column:

Description of the knitting progress:

Instead of 3 lifting VPs, we collect 2 at the beginning of each row, for accuracy.

We introduce the hook not into the loop of the base, as we used to knit, but into the leg of the double crochet of the previous row. And so we knit the whole row.

As you can see, each column goes strictly on top of each other and the junction is ideal.

Here, for comparison, is the usual knitting in a circle with an offset and using this method.

3. Knitting in one loop 2 CCH

This option is a little more labor-intensive than the previous one, but it also has a place to be.

Video lesson on an even seam with circular crochet using an additional column:

Description of the knitting progress:

We start the row with a set of two air loops.

In the same loop we knit CCH.

We continue to knit with columns in each subsequent loop of the base.

We end each row with a connecting column in the loop of the base of the first column, and not in the lifting VP.

As you can see, the seam is less visible. Here you have 2 samples again for comparison. The blue one uses a third way to solve the misaligned seam problem.

We hope everything worked out for you.
Share with us your result and leave comments.
Author Svetik

Friends, today I bring to your attention information on how to crochet a circle. Trust me, this will help you. The circle shape is very often used in knitting, especially in crochet.

In general, now we will take a closer look at how to crochet a circle using various columns and derive a small rule for the future, so that it is just easier to remember all this and apply the information received in practice. The main thing is to carefully read what is written below, there will be questions - ask in the comments to the article.

A crochet circle can be crocheted using absolutely any of the columns, whether it be a connecting column, a single crochet, a half crochet with a crochet, or double crochets (columns with any number of crochets). There is practically no difference in the technology of crocheting a circle when using different types of columns, there is only a difference in the execution of the columns themselves, and hence the difference in the first row of each circle, or rather the difference in the number of knitted columns.

This difference is due to the fact that each column has its own height, therefore, the higher the columns, the more of them must be done in the first row of the circle in order to make it flat.

When the first row of the circle is connected, then further actions consist only in performing uniform increases in each row.

A uniform increase is an increase through an equal number of loops

How to make increments for crochet circle

But the increase on the canvas can be distributed in different ways. And the appearance of the circle directly depends on this. We can get:

1. Circle with an increase in wedges (increases in each row are made strictly above the increases in the bottom row) photo

In this regard, peculiar wedges are obtained on the canvas. They form small "corners" along the edges of the canvas and the circle is not quite even. But, nevertheless, this is the easiest to remember and the most common way to knit a circle.

1. Increased circle without wedges (increases in each row are made with a shift of one loop relative to the increases in the bottom row)

Here you get a real circle - even and neat, but without a scheme “before your eyes” it’s quite easy to get lost ...

In addition, the increases themselves can be done in two ways ...

Typically, additions are made by knitting two columns at once from one loop. But you can also do it as follows: in the place where you need to make an increase, tie 1 column and 1 air loop (instead of two columns). For example, you can tie a circle with double crochets in this way. In this case, there will be small holes in the knitted fabric, but sometimes this is very useful ...
Moreover, the smaller the columns and the thicker the thread, the less noticeable these holes are.

This method of increase is good for knitting summer hats - panama hats. And in my opinion it is justified only when forming a circle with increases in the form of wedges.

How to crochet a circle with single crochets

Knitting any motif from the center, including the circle, begins with the initial loop. For the initial loop, you can use either a closed loop or a sliding loop or an amigurumi loop - it all depends on the thickness of the threads, the selected pattern and the desired result. Read more about how to start knitting a motive from the center in the article.