What is warmer for a fur coat: fox or mink? About the most practical and warm fur coat

Now it’s rare for a seller to say that his fur coats are not the warmest and most wearable. If this is admitted, then sales will drop markedly, which will affect his salary. Therefore, it is in his own interests to tell that you just paid attention to the warmest type of fur coat, and in general it has no flaws, but only advantages.

Moreover, information about warm fur coats is often distorted beyond recognition. Rabbit fur coats can pass for the warmest fur coats, and the advertised mink no one doubts that it is the warmest of all fur coats. The power of advertising convinces and encourages purchases, sometimes unconsciously, which then leads to regrets about the purchase.

The warm properties of a fur coat directly depend, first of all, on the style, length and density of the fur, as well as on the habitat of the animal. It is quite natural that if an animal lives in the north, then its fur will be the warmest. Because it helps the animal to survive in harsh climatic conditions. And vice versa, if the animal was bred on a fur farm in the middle lane, with a mild climate, then the fur will not be as warm as, say, that of the Finnish fox.

In addition, the length of the fur coat also matters and the style. If her sleeves are spacious, and in itself a short resembling a coat, then there can be no talk of any thermal properties.

Therefore, we can immediately say that the warmest and most practical fur coats are sewn from the fur of animals that live in the north. Where the coldest temperatures occur in winter and harsh winters, the fur will be the warmest. Since without such fur, the animal would not have survived the harsh winter, when the temperature can drop to minus 40-50 degrees.

Fur coats are the warmest.

northern wolf
reindeer
marine mammals

Naturally, such sheepskin coats are popular among the peoples of the far north and allow them to endure severe frosts tolerably. It is believed that a sheepskin coat made from reindeer fur is so warm that you can even sit in it in the snow.

But such short fur coats are considered exotic for regions with mild climates and are not as popular as in the far north. And yes, these boots are not cheap. But on the other hand, it is precisely in terms of their thermal properties that such fur coats are in the first place and they have no equal.

Further in second place are camel and llama coats. But camel fur is considered exotic, rare and, moreover, heavy and uncomfortable to wear. Therefore, it is rarely used. But llama fur coats are much more common.

What fur coats are the warmest and most wearable

Even in past centuries, it was believed that the most wearable and warm fur coats can be sewn from fur.

Beaver
Sheepskins
Bear

True, such furs were selected mainly for men's fur coats. For women, furs were chosen softer and more beautiful.

Sable
arctic fox

But they are less wearable.

But beaver fur coats have no equal in terms of wear resistance and thermal insulation properties.

Do not let moisture through
Practically do not get wet
Keep warm
Not subject to abrasion

You have to wear a beaver fur coat for 20 years so that it starts to wear out and wear out. Here is such a high-quality beaver fur. True, if the beaver's fur is sheared, then the ability to retain heat is reduced. Previously, beaver fur coats were made warmer, but they were also heavier. Now, thanks to modern processing methods, they are lighter, but the ability to retain heat can also be reduced. Much depends on how the skin was processed.

As for otter and bear fur coats, they are quite rare and are considered exotic.

Further after fur coats from a beaver there are fur coats from a fox, an arctic fox, a marten, a raccoon. In appearance, they are beautiful, lush and, of course, very comfortable, light and warm. It is thanks to the lush, thick, long fur that such fur coats perfectly retain heat. But unfortunately, they are not as popular as mink.

The warmest fur coats and resistant to moisture and precipitation are made from fur

Nutria
seals
Karakul

Such fur coats are well suited for those who live in a temperate continental climate, where mild frosts are replaced by thaws with rain. Since such fur coats are not afraid of rain, moisture.

Next in line is the mink. If you ask the seller of mink coats what kind of fur is the warmest fur coat. That majority will answer that it is the mink coat that is the warmest, most practical and has no flaws at all.

But it is only thanks to advertising that it has become so popular. In fact, it does not retain heat as well as the types of fur coats listed above. And how can she keep warm and protect from frosty winds, if she looks like an ordinary fur coat, especially since her pile is not as thick as that of a fox and arctic fox.

In addition, mink coats are different in their properties to keep warm. Much depends on the country of origin and the region where the mink is grown.

The northern type of mink is distinguished by large, heavy and thick fur, a northern mink coat will be warmer than a nutria coat.

The southern type of mink is the most popular now. Fur coats from the southern mink are light, shiny, thin. And not designed for severe frosts. By its property to keep warm, it can be compared with plucked nutria and a rabbit. But it is thanks to the different colors of mink fur that the mink has become so popular and expensive. But for its ability to keep warm, it is no better than the same fur coat from a rabbit or a hare.

Fur coats retain heat worse

Such fur coats are more suitable for those who live in the southern regions. Where moderate, light frosts. Since from severe frosts, such fur coats will not save. Mouton fur coats are not suitable if the thermometer drops to minus 10.

Worst of all keep warm and the least wearable and practical, this fur coat is made of ermine and chinchilla. True, some sources are trying to prove that chinchilla fur can warm due to its density. Only that's how long it can warm, if the fur itself is tender enough, like a cobweb, and quickly wears out.

A chinchilla fur coat is not intended for everyday wear. They are better suited for special occasions to emphasize their status, status, belonging to the upper class.

The same applies to ermine fur coats. Its fur is thin, short and not at all able to retain heat. It is more like an ornament of an outfit, a status. Ermine and chinchilla coats will be cold for winter, and are best for moderately cool weather.

A fur coat has been considered a symbol of wealth, taste and style since time immemorial. Plus, it's still very warm. It is known that a fur coat warms better than a sheepskin coat or down jacket.
How to correctly understand which fur coat is the warmest, which fur and style to give preference to? Choosing the right high-quality fur coat is an art that costs a lot of money and is often acquired exclusively with one's own experience. Without a doubt, it is better not to experiment with such an expensive acquisition, but to learn from other people's missteps and listen to the advice of professionals from the world of fur fashion. Therefore, the main condition when choosing a winter coat, a fur jacket or a sheepskin coat is that it should be warm, durable and comfortable. Yes, and among other things, in the Far East and Siberia, as before, fierce cold rages in winter, from which it is so pleasant to hide in a short or long fur fluff of winter outerwear made of real fur.

1) The first tip on how to determine which fur coat is the warmest is to choose the right fur. In the cold winter season, a fur and fluffy sheepskin coat or fur coat made of red fox, white or blue fox, expensive sable, muton (sheepskin), chinchilla, wolf, raccoon dog, classic mink, astrakhan fur, domestic nutria, cozy all-weather beaver or fur seal. In winter, it is models of sheepskin coats and fur coats made of natural fur that are relevant, and artificial furs have faded into the background.

2) If your climate zone is not very cold, but wet and humid, then you should choose a fur coat made of waterproof wolverine, otter, nutria, beaver or fur seal fur.

3) The coldest fur coats and sheepskin coats are products made from marmot, chic ermine and sheared rabbit. The longer the fur, the warmer it is, and things made of sheared fur are famous for being one of the coldest, and with the exception of “cleanly showing off” in front of friends, they are no longer good for anything in a practical sense, and especially in the ruthless Siberian frost. .

So what is the warmest coat? The warmest sheepskin coats and fur coats are made of muton and fox fur, as well as nutria, chinchilla, beaver, arctic fox, sable, mink, cat and astrakhan fur. Without a doubt, when choosing a fashionable winter fur coat, a woman first of all pays attention to how dazzling she will look and look in a chosen fur coat. The most durable are fur things from otter and seal (endure up to 20 seasons), beaver (18 seasons), astrakhan fur and mink (10 seasons). Fur coats made of arctic fox, fox, sheepskin and sable will please the eye for 8 seasons. From nutria, squirrels, foxes and muskrats, fur coats will last 4 seasons, and from chinchilla and rabbit only 2-3 seasons.

Evenks, Khanty, Mansi and representatives of other northern tribes cannot imagine life without fur. They never had a fashion for fur coats and sheepskin coats. Where temperatures drop below -50 degrees in winter, furs are more of a necessity than an elite exotic. In central Russia, it rarely gets colder than -25, so we can afford to dress up in furs that don’t particularly warm. Perhaps, the fur coat or vest from the store catalog that you liked belongs to those. To find out for sure, let's figure out which fur is the warmest, and which one is more decorative.

Fur coats in which it is not scary to fall asleep in a snowdrift

Khanty, Mansi, Yakuts prefer natural fur to fashionable artificial fur: deer, wolf. A natural fur coat made of reindeer fur is so warm that it is not cold to sleep in the snow in a frost of -40..-50 degrees.

Wolf hair is coarser than deer, but warms a little worse. Therefore, the skin of a wolf is often used for fur coats, warm accessories, such as hats or muffs. The fur of a fur seal and a seal, which the northerners also do not disdain, is suitable for tanned products and is not inferior to a deer coat in the ability to keep warm.

Warm furs for the Tundra from Peru

Not all deserts are hot, and not always. In the Tundra, in the deserts, it is so cold at night that you can die even in a winter jacket. Therefore, the few inhabitants of the cold desert always keep a supply of fur things in their wardrobe. The warmest of them are llama coats.

In the frosty Arctic, llama fur coats, oddly enough, came from Peru (South America). In Peru, it is rarely colder than +17 degrees in winter, because there llamas and their closest relatives - camels, are more often used as beasts of burden. And in places where snow is a common phenomenon in winter, fur coats made of llama skins are considered one of the warmest outerwear.

At the European Fashion Week in the collections "Winter 2016/17" llama coats were demonstrated by models Burberry, Carolina Herrera. The long hair of the alpaca llama fits perfectly into the styles of hippie chic, grunge, glamour.

Authentic Russian fur for Siberian frosts

In Rus', men's fur coats of hunters and vests of lumberjacks were sewn from bear fur. A dense undercoat allows the clubfoot to hibernate without fear of freezing during severe frosts. In terms of warmth, a bear's fur coat is inferior only to deer and fur seal fur.

Women's fur coats were not sewn from a bear - very heavy fur. For fragile Russian women's shoulders, fox, sable, rabbit and mink are more pleasant. , polar fox and fox warmed Russian young ladies at a time when overseas merchants and royal people became trendsetters. But modern dressing: shearing, beating, plucking - noticeably steals heat from the fur

Decorative furs that practically do not heat

The fur of a rabbit, nutria, astrakhan fur, a ferret and a marmot is suitable for fashionable models of “autolady”, vests and sheepskin coats for continental winter. On frosty days, it is better not to wear these fur coats, otherwise there is a risk of catching a cold. A variant of a winter rabbit or its counterpart in terms of warmth - a muton - is a fur coat with a warm lining, possibly even fur.

The warmest fur is deer, it will be a little cooler in a fur coat made of a bear and a wolf, but these options are good if you often have to be outside in frost colder than -20 degrees. For Moscow and the central regions, the warmth of mink, arctic fox, fox is enough. But from a rabbit and a ferret, it’s better not to take it for the winter, at most for the fall, to wear over a leather jacket or raincoat. They do not warm well, but they look stylish and are suitable for creating spectacular images for every day or for a special occasion.

The end of winter is the time when sales begin in fur stores, and any fashionista can buy the fur coat of her dreams at a very attractive price. When choosing high-quality natural fur products, you always have to take into account a lot of subtleties. Even if you have already had to wear "mink" and "sable", you are not immune from mistakes when buying a new thing. Therefore, on the pages of the "Beautiful Half" we decided to talk about how to choose a fur coat and discuss the most pressing problems that arise in this case.

Neither cut, nor design, nor colors, nor even the price of a fur coat are indicators of its quality. The main criterion by which a smart woman chooses a good fur coat is its wear resistance. Another factor is directly related to this factor - the service life of the product. And everything seems to be clear here: the less the fur is deformed during wear, the longer the fur coat will retain its best consumer characteristics. And when choosing a fur coat, the heat resistance of the fur is not the least important. But it is usually taken into account only by residents of the northern regions. For most southern fashionistas, a fur coat is just an image and status item: sometimes they don’t care whether this garment can withstand a forty-degree frost or not.

What fur is better?

In the rating of sympathy for Russian women, mink coats have been leading for many years. They still remain a symbol of well-being, high social status and good taste. But for all its beauty and external gloss, mink does not belong to the most durable and wear-resistant furs - it has rather “average” indicators. And experts evaluate the quality of fur coats from a particular fur according to the following hundred-point scale:

hare - 5 points, high heat resistance, average service life - 1 season;

rabbit (long pile) - 10 points, high heat resistance, average service life - 2 seasons;

sheared rabbit - 30 points, low heat resistance, average service life - 2-3 seasons;

marmot - 30 points, low heat resistance, average service life - 3 seasons;

protein - 30 points, moderate heat resistance, average service life - 4 seasons;

desman - 35 points, moderate heat resistance, average service life - 4.5 seasons;

nutria - 40 points, moderate heat resistance, average service life - 5 seasons;

lynx - 45 points, moderate heat resistance, average service life - 5-6 seasons;

red fox - 45 points, high heat resistance, average service life - 5-6 seasons;

muskrat - 45 points, moderate heat resistance, average service life - 5-6 seasons;

sheepskin - 50 points, high heat resistance, average service life - 6 seasons;

karakul - 50 points, moderate heat resistance, average service life - 6 seasons;

marten - 60 points, high heat resistance, average service life - 7 seasons;

arctic fox - 60 points, high heat resistance, average service life - 7 seasons;

raccoon - 65 points, high heat resistance, average service life - 9 seasons;

mink - 70 points, moderate heat resistance, average service life - 10 seasons;

sable - 80 points, high heat resistance, average service life - 12 seasons;

fur seal - 85 points, moderate heat resistance, average service life - 15 seasons;

beaver - 90 points, moderate heat resistance, average service life - 18 seasons;

otter - 100 points, moderate heat resistance, average service life - 20 seasons.

Fur dressing

Ideally, a fur coat made of natural fur is supposed to be soft, elastic and resistant to deformation. If you deliberately wrinkle it, then it should straighten out on its own, and there will be no traces in the form of creases on the surface of a well-dressed fur. Now remember an important point: softness and lightness are not the same thing. A “weightless”, “airy” fur coat, no matter what fur it is made of, is a deliberate marriage. The bottom line is that unscrupulous manufacturers often stretch the fur during dressing, since special technologies have long been worked out. As a result, the skin on which the pile rests becomes incredibly thin, and the villi seem to “move away” from each other. There is no longer a close fit necessary to maintain heat between them.

The correct dressing of the fur or not can be determined in another curious way - by smell. Handicraft fur coats usually do not smell very pleasant. And the fur, processed according to all standards, will not irritate your olfactory organs. Branded things simply cannot have a repulsive smell.

If the fur has a long pile, then when checking for quality, it would not hurt to stroke it “against the wool” - just run your hand in the right direction. Breaking and falling out villi are a signal that something is clearly wrong with the fur coat.

How to choose a mink coat

Perhaps no other fur is faked as often as mink. Therefore, when buying a mink coat, it is worth spending time studying it closely. First of all, look at what is under the pile. Between the main villi of the fur - the so-called awn of the mink is a short fluff - the undercoat. If it is not there, then in front of you is not a mink, but its imitation.

All hairs on mink fur are usually the same length. Even a small difference that can be seen with the naked eye is critical.

When stroking against the wool, the pile on the mink coat should in no case become “sticky” - it usually immediately takes its original position.

And another alarming signal is the loss of villi. You can even grab a few hairs with your fingers and pull them gently - of course, without applying excessive force. Easily separated villi are a sign of poor-quality fur.

Mink fur has a pleasant natural sheen. Its main natural color is brown, and shades can be both light and dark. The most common brown shade, it is typical for the European mink. Natural colors include white, gray, black.

Fur coats made of black mink with a short pile are now in special demand and are known under the name "blackglama". Due to the very short length of the guard hair, blackglam fur coats seem not to be fur, but velvet. This variety of mink is cultivated in the USA. Its luxurious color is often referred to as the "color of oil."

Mouton coats

Mouton is a way of dressing sheepskin. The raw material for it is the skins of Australian sheep, but the fur processing technologies are not the same in all countries. For example, in Russia, muton fur is impregnated with formalin, which creates an airtight "shell" around each hair and increases the resistance of the pile to external influences. The Russian muton wins in terms of wear resistance over foreign counterparts, since in other countries formalin processing is recognized as harmful production and is prohibited. However, the quality of such fur coats is truly unrivaled.

A good muton fur coat will not only protect in cold weather, but also withstand tests in the form of wet snow and other atmospheric precipitation with dignity. It will not be covered with "pellets" during wear - unfortunately, handicraft fur coats sometimes suffer from this drawback. With proper processing, the muton acquires a pleasant unobtrusive sheen - it can also be considered one of the positive signs.

A muton fur coat does not need an additional insulating lining - this fur itself copes well with the functions of a “heater”.

On the surface of the fur coat there should be no matted areas of fur. This shortcoming, in principle, is not particularly terrible, as it is easily corrected with a comb, but only an old muton can have such a look. It is quite possible that the material for sewing a fur coat was not selected too meticulously.

How to choose a fur coat from a beaver

Beaver fur takes an honorable second place in the wear resistance rating, second only to otter fur. You can wear such a fur coat without problems from 18 years old and more - it all depends on the accuracy of the hostess. The beaver, as you remember, is a semi-aquatic animal - it spends a lot of time in the water. Therefore, its skin is not afraid of moisture. On the contrary, after a walk under a wet snowfall, a beaver coat becomes fluffier.

Natural beaver fur is very pleasant to the touch if you iron it in the direction of the pile. As soon as you move your hand in the opposite direction, you will immediately feel a slight tingling sensation. By the way, this is a specific feature of the beaver - other furs do not have it.

Plucked beaver fur coats are now in fashion, and many women suspect that this type of dressing of boar fur has a bad effect on the quality of the fur coat. In fact, a plucked beaver is practically no different in properties from a regular beaver.

Natural beaver is quite an expensive pleasure. There are many fakes on the market - fur coats made of cheap fur, but "stylized" like a beaver. This is either a nutria - it can be recognized by the absence of undercoat, or a rabbit - sellers usually call these fur coats "beaver", misleading the buyer.

How to choose a fur coat from a raccoon

Raccoon coats are one of the best outerwear options for a long and harsh winter. Visually, it is always easy to distinguish them from the background of all the others - the raccoon fur is distinguished by volume and fluffiness. At the same time, they are light enough - as much as necessary for comfortable wear.

An unpainted raccoon is recognizable by its dark awn and silvery hair tips. But fur coats from it are less and less common on the market, and tinting is gaining more and more popularity. In any case, raccoon fur should have a thick undercoat, and it itself is soft, tender and elastic. Sometimes, under the guise of a raccoon coat, an inexperienced customer can be offered an analogue from a raccoon dog - outwardly, such products look exactly the same, but the rough texture of fur and mezdra gives out a fake “with a head”.

However, here it is worth making one lyrical digression. The fact is that the famous Finnish raccoon also belongs to raccoon dogs - this breed was bred artificially, specifically to obtain fur with high consumer characteristics. Finnish raccoon fur coats are a sign of Finnish quality. They are not cheap, but fully justify the investment made in them.

We also recommend reading articles:
How to choose a hat for a fur coat?
Oversized style: as if "from someone else's shoulder"
Women's duffle coat and 20 ways to wear it

On chilly winter days, nothing will warm you up like a natural fur coat. It has been and remains the dream of every woman since ancient times, when animal skins were the first clothing of man. Nowadays, a fur coat not only gives warmth and comfort in the harsh winter, but is also a sign of taste, wealth, and the status of a woman. If you fall asleep and wake up with the thought of a fur coat or freeze in front of the windows of fur salons, mentally trying on an outfit for yourself, then it’s time to go in search of a suitable option, armed with information about which fur coat is better to buy for the winter so that it serves more than one season and pleased with its warmth, comfort, beauty. Today we will tell you which fur is better for a fur coat and what are the basic requirements for fur products. Knowing everything about furs, you can safely go in search of the fur coat of your dreams.

The main characteristics of fur products

Natural fur is very expensive, so the choice of a fur coat must be approached with all responsibility. The main requirements for fur products are:

Thermal characteristics. The ability of a fur coat to warm its owner depends on the length of the product, the density of the fur, and the elasticity of the pile.
Wearability. This is one of the main properties of fur. Many factors affect the durability - both the quality of the fur and the conditions for its storage.

Let's take a closer look at each product feature.

Thermal properties

The heat-shielding properties of the skin of an animal depend on the following factors:

Length, elasticity of the pile.
Hair thickness, down.
The number of air bubbles inside and between the hairs.
Looseness of the flesh. Very often, in order to reduce the weight of the product, the core is stretched. As a result, the gaps between the hairs increase, and the air gap decreases.

If we classify animal skins according to heat-shielding properties, then the coldest are:

Gopher.
Rabbit.
Ermine.
Goat.

The average thermal characteristics are:

Mink.
Beaver.
Fox.
Chinchilla.

The following animals have the warmest furs:

Sable.
Fox.
Wolf.
Mouton.

When choosing a product, be sure to check the density of the down. Run your hand over the coat and against it, and you will see the density of the fur, the down. Blow on the layer: if the villi immediately return to their place, then the fur is of high quality. The thicker the pile, the thicker the fur layer, the warmer the product.
Hair should be long and shiny. The longer it is, the warmer the coat will be. In a fox, wolverine, arctic fox and raccoon, the hair length can reach 40 mm, in a muskrat, sable 25-40 mm, in a mink - 25 mm. The arctic fox is able to withstand temperatures up to -60 degrees, thanks to its long pile. Fur coats made of polar fox are able to warm in the coldest winter. In addition, the fur of this animal looks luxurious, blue fox fur coats are especially valued.

What fur is best for a fur coat?

To decide which material to choose a fur coat from, you must first answer two questions.

Purpose of purchase

If you need clothes "to go out", then the issues of thermal performance and wearability go by the wayside. More often in this case, the decisive factor is the brand and an impressive figure on the price tag:

Chinchilla, ermine, mink skins are suitable as an indicator of their own prestige. Remember that such products are sewn on a lining without insulation, so in cold weather you can freeze in such a coat.
A fur coat designed to protect against frost and wind should be made of fox or muton fur.

Important! Choose to wear models made of solid fur. They warm better in cold weather than products sewn from separate plates. Sheared fur also cannot boast of its heat-shielding properties.

Conditions under which you will wear the product

For a humid climate, waterfowl furs are suitable. For example:

Otter.
Muskrat.
Nutria.
Beaver.

In severe frosts it is better to warm:

Sable.
Mouton.
Wolf, fox.

For a milder "European" climate fit:

Mink.
Rabbit.
Fox.
Marmot.
Chinchilla.
Ermine.

Overview of the properties of different furs

Let's compare animal furs in terms of thermal characteristics in order to answer the question, a beaver or mink fur coat - which is better?

Mink and beaver. The fur of these animals is distinguished by beauty, practicality and wear. However, a beaver coat definitely wins in terms of keeping warm.
Mink and muton. Of course, a mink coat emphasizes the status of a woman, as it looks luxurious, rich, and very expensive. However, the muton is ahead of the mink in terms of thermal characteristics. Mouton is a specially processed sheepskin, and products made from it tend to maintain the optimum temperature.

Important! If earlier products from a muton did not have a very attractive appearance, today fur coats look no worse than mink ones, thanks to special processing and painting. In addition, the muton is resistant to dampness, durability, and caring for such products is not difficult.

Fox. Fox fur coats are considered the warmest because of the length and density of the pile. Models made of silver fox are distinguished by softness and beauty.

Important! Fur coats made of black and silver fur belong to the category of elite clothing.

The wearability of fur is one of the main characteristics of the product.

The cost of fur products is quite high, and it is absolutely impractical to buy them for one season. It is very important that the purchased fur coat serve its owner for more than one season, while maintaining its original attractive appearance.

Wear is one of the properties of fur and depends on the following factors:

Wear resistance of the pile.
The strength of the bond between skin tissue and hairs.
Wear resistance of the skin.
Dressing and coloring.
Storage conditions.

The furs of the following animals are considered the most wear-resistant:

Otter. You can wear an otter product for 20 years. The wearability of otter fur is considered to be 100%, and the wearability of other types of fur is calculated in relation to this indicator.
Sable. Products made of sable fur will delight for 12 seasons.
Mink will please its owner for 10 years.
Raccoon - 9 seasons.
Marten and arctic fox - up to 7 seasons.
Sheepskin and astrakhan fur will please the owner of 6 years.
Nutria and fox - about 5.
Sheared rabbit - 4 seasons.
Hare. The fur of a hare is considered the most fragile. A fur coat from it will last only 1 season.

Important! The durability of the product is determined not only by the natural properties of the skin, but also by the processing method and the skill of the manufacturer. The wear indicator of the product will be higher if the fur is “winter”. It is distinguished by a thick down and a higher density and length. And vice versa - during the period of molting of animals, the strength of the bond between the mezdra and the hair decreases. These skins are not of high quality.

Fur coloration also reduces the wear rate by 10-20%. But a haircut, on the contrary, increases this figure by 20-40%. Therefore, sometimes long fur is sheared in order to prevent matting and breaking off. It should be remembered that sheared ermine, gopher and rabbit fur warms much worse.

Choose fur products exclusively from northern countries - Canada, Russia, USA, Finland. Only in cold climates can natural thick fur be grown.
When purchasing a fur coat, check the fur. Crumple its edge - it should easily take its original position. Smell the fur - high-quality skin does not have sharp chemical and biological odors.

How to choose a fur product for many years?

Pay attention to the following signs of the quality of a fur product in order to finally decide which fur coat is better to buy for the winter:

Kind of animal. Products with a short service life can be purchased for children. They grow quickly, and it is not necessary for them that the fur coat retains its attractive appearance for many years.

Important! Things made of rabbit, squirrel and hare (fur coats, hats, vests) are distinguished by good thermal qualities and low price.

Treatment. Mezdra should be white and not make any sound when shaken. If the mezdra crunches, it means that the fur is overdried, and its yellow color indicates that the fur is old.

Important! Pay special attention to the lining: if it is not sewn on tightly, then this indicates that the manufacturer is confident in the quality of the product and allows the buyer to evaluate the dressing of the skin from the inside.

Fur dyeing. Fur dyeing can be done for different purposes. Very often, the manufacturer tries to hide product defects under the paint. For this, dark shades are used. However, some fur needs to be dyed because it does not look very attractive in its original form, for example, nutria. Today, dyeing is done with high-tech dyes that do not affect the quality of the fur. So, if you want to buy a purple fox fur coat, then get it.

Important! To check the quality of the dye and see if the fur will get dirty when worn, wrap a few hairs with a handkerchief and rub a little. If there are no marks left on the fabric, then you can not worry about the quality of staining.

Sewing. Allowed fur products, sewn "in dissolution", and whole. Tailoring depends on the fur of the animal:
1. If the animal has a thick mezdra (raccoon, nutria, beaver), then the products are usually sewn “in dissolution” so that the fur coat “sits down” better on the figure and does not look like a case.
2. If the mezdra is thin (mink), then the product sewn “in dissolution” will give harmony to full ladies.

Important! In any case, the tailoring of the product depends on the style, length, color. Pay attention to the quantity and quality of stitches. The smaller they are, the stronger the fur product.

Longer wear products of a wide silhouette with a three-quarter length and adjustable cuffs. And vice versa - welt loops with fur trim and a zipper will very quickly disable the coat.
To avoid the temptation to put a bunch of keys and a mobile phone in your coat pocket at the same time, purchase the product only with an inside pocket.
The best option for a mantle belt is fur, as suede and leather belts quickly damage the pile.
Buy a coat only in a fur salon or in a store that has proven itself well. Such companies care about their reputation and product quality. In addition, in such a company you will be given a warranty card for 1 year.
Beware of fake fur products. Sometimes an inexperienced buyer is offered products made from Canadian sable, but there is no such beast in nature. Under the guise of a sable, they sell a marten. Of course, marten products are also very beautiful, but they cannot be compared with Russian sable.

Important! By touch, you can tell a marmot from a mink. Marmots have hair of different lengths, but the mink has the same hair and does not prick.

Pay special attention to the seams. They must be stitched neatly and thinly. To make sure the quality of the seams, feel them. If they are not palpable at all, it means that glue was used instead of threads. Such a coat can simply fall apart in a few days.

Important! Seams on kinks and stretchy parts of the coat (armpits, pocket trim, upper back) should be with built-in soft ribbons to strengthen when stretched and deformed.

The marking of the wrong side of the fur product must have information about the country of origin, the date of tailoring (processing) of the fur.

Rules for the care of fur products:

Before you hide your fur at the end of the winter season, be sure to clean and dry it.
At home, store the product in a closed cabinet and a special case. The distance from the cabinet to the heaters must be at least 1 m.
Ventilate the product periodically during storage and renew the moth remedy in time. It is impossible to pour manto with naphthalene.
If the fur coat gets wet while wearing, then first shake it off excess moisture and lay it on a horizontal surface. Dry the product at room temperature, away from heaters and heaters. Carefully comb the dried fur in the direction of pile growth.
Hang the product on a broad-brimmed coat hanger.
It is impossible to store products made of dyed and undyed fur side by side.