Home boots crochet pattern. Knitted summer boots with knitting needles. Crochet summer boots tutorial

Summer openwork boots have been filling store shelves with fashionable models for several years in a row. But sometimes it is very difficult to choose such shoes for the leg, but you want to be in trend.

There is an exit. Crochet stylish boots yourself, choosing your favorite yarn, style, colorful accessories for decoration.

How to crochet homemade boots

To begin with, try to make simple indoor boots, and then move on to more complex styles. Prepare for work: woolen yarn or acrylic - 100 gr, hook No. 3, awl, felt insoles. Boots will be assembled from 10 hexagons, five per foot. Knit motifs in a circle, weaving threads of different colors.

We knit motives

Designations: c.p. - air loop, art. b / n, art. s / n, art. s / 2n. - single crochet, double crochet, double crochet.

Dial 6 vp, close in the ring.
The first fragment - 4 ch, 15 st.s / 2n.
The second fragment - ch 2, 17 lush columns.
The third fragment - ch 2 lifting, nakid. Further relief columns in a circle.
The fourth fragment - ch 3 lifting + 2 st.s / n. in the arch, 3 st.s / n. in the next two arches, repeat to the end of the row.
Fifth fragment - 1 v.p. lifting, 3 st. / n. in the same loop, 1 st.b / n. in the next 10 loops. Then 3 st.b / n. in 11 loop.

If in doubt, see the diagram.

Making the top of the boots

Having knitted all the motives, collect them 5 pieces in a boot. Connect the parts together with single crochets. Start fastening the product from below, taking two blanks on the heel, one folded in the middle on the toe. The remaining two figures will go to the bootleg. Motifs can be any color, depending on your preference.

We collect boots

Take the insole along the leg.
Poke holes with an awl along the edge of the workpiece with a distance of 1 cm between them.
Tie the insole according to its shape with ordinary columns in three rows.
Tie the workpiece to the soles of st.b / n.

Comfortable boots are ready. They are perfect for a home dressing gown, giving everyday clothes a piquancy and zest.

How to crochet fishnet boots

Knit light summer boots from mixed or viscose threads. They will need about 150 grams, depending on the height of the shaft. Also prepare a thick needle, an awl, a hook and ballet flats, which will become the basis of your boots.

Sew the shoes with a chain stitch along the outside, making stitches at a distance of 0.5 cm from the sole.
Knit round st.s / n. - 8 rows, add or decrease the number of loops if necessary.
Toe and heel issue st.s 2 / n.
The bootleg connected by the chosen pattern, baste to the ballet flat.
Decorate the top of the product with a narrowed border so that the boots do not slip from the shin to the heels.

Tip: soak the product for a quarter of an hour in a starch solution and it will keep its shape for a long time.

Patterns for knitting crochet boots

Having understood the principle of making shoes, take on more difficult work. Check out our selection of models, get creative with decorations and get a pair of exclusive boots.

Lace boots with solid soles

Make such bundles from cotton yarn with lavsan. Cut off the textile top of the sports slippers - the sole is ready. Then decorate the rise, sides, heel with double crochets and get a boot to which you attach the bootleg. An openwork pipe is made from separate fragments of lace, which are connected in the process of work.

Lightweight boots in cotton yarn

If you have old moccasins, transform them into dainty boots by cutting off the straps and tying the base like booties with a patterned top. Knit the boot in the round with the desired pattern.

When soiled, wash bundles in warm soapy water. Rinse, starch.

Tip: dry your boots without wringing them by pulling them over plastic bottles of cold water.

So the job is done. Put on and wear a new thing with whatever you want: a dress, shorts, jeans - and you will look bright, stylish, unusual.

Nowadays, boots are an integral part of women's wardrobe. For winter colds, there are warm leather models, with fur and embossed soles. Autumn models save women's legs from getting wet, while summer boots become just a beautiful and stylish accessory.

When did boots appear? According to archaeological data, the appearance of shoes dates back to about 25 - 30 thousand years ago in North America. There are also a few samples discovered later in the territory of ancient Egypt, in Africa.

In those days, shoes were highly dependent on climatic conditions. In hot countries, the Greeks, Romans and Egyptians of antiquity wore mostly sandals, while the northern peoples preferred warm leather shoes and boots.

The Scythians preferred soft, narrow and high leather boots, into which they tucked their pants. They resembled a stocking and were attached to the leg with special straps. Such products were decorated with embroidery and fur. At that time, both women and men wore boots, while female models were with short tops, and they were made of red leather. This color was considered the most beautiful. Often they were embroidered with ornamental patterns.

In Europe, boots are first mentioned in the 15th century. They served primarily as men's riding shoes. They were very long, above the hips of the model. During the time of the French king Louis XIV, over the knee boots with square socks, high heels and spurs were very popular. In the middle of the 18th century, bright and pointed models became fashionable. By the 19th century, it was gradually replaced by the popularity of low shoes trimmed with fur.

Like many other things, boots at the very beginning were an indicator of the social level and level of wealth of a person. For example, in Rus', only the upper classes flaunted in morocco boots, while ordinary people had bast shoes and pistons on their feet. During the reign of Peter I, the popularity of boots became much less, but by the end of the 19th and beginning of the 20th centuries, almost all men in Russia wore boots. In the female version, there was a shortened shaft and trimmed with red morocco or cloth. The twentieth century was also marked by the creation of an asymmetric insole, which repeated the outlines of the foot; before that, shoes were not divided into right and left boots.

Now you can find a model for every taste, from a variety of materials, with heels, wedges or flat soles. Like any accessory that affects the whole image, handmade boots will always be out of competition. One of the varieties of such products will be crocheted boots.

In this article, we will offer several options for crocheted boots. They will all have one thing in common - a finished sole. And then there are options.

The first one is to give a second life to old shoes. It is quite possible that you have a pair of shoes, boots or even ballet flats lying around, the top of which is damaged. It may have been dirty, torn, or just worn out, but this pair has a very comfortable last. Then your new boots will not rub your legs under any circumstances and will become a great new, beautiful accessory in your wardrobe.

The second option is a new sole. Here, too, there is scope for creative activity and imagination of needlewomen. For example, you can make a knitted part, and then take the boots to a shoe shop and entrust the attachment of the sole to a specialist. Another option would be to buy comfortable slippers, perhaps even homemade ones, and turn them into beautiful boots. Typically, such shoes have a comfortable, soft and very often rubberized sole. Boots on this basis will perfectly withstand the street weather.

The next step is to choose threads. Everything will depend on what season you will be knitting boots for. If you want to make tight boots for fall or spring, use a wool-acrylic blend. The latter should be more, it is due to the artificial acrylic component that the product will be non-prickly, pleasant to wear and durable. For summer models, choose cotton or mixed threads with the addition of the same acrylic, viscose. Lightweight and breathable, these threads are perfect for warm weather, and the legs will be comfortable in them.

Crochet boots

Option 1

You will need:

Yarn 80% acrylic, 20% wool (in this master class black and yellow, but of course you can choose other colors) 135 m / 50 g;
Yarn "grass" yellow;
Hook number 3;
Slippers with a comfortable sole without a back;
Awl.

We will knit with a thread in two additions. The fabric part of the nose of the slipper must be cut off, leaving the very tip. We do not throw it away, it will come in handy later.

Now you need to make holes with an awl at an equal distance around the perimeter of the slipper. We pierce with an awl from the side in such a way as to capture part of the rubberized sole and insole. Now you need to make stitches with black yarn, as in the photo. We fix the thread, but do not tear it off.

We knit 1 row with connecting posts. The number of loops in each stitch will depend on the width of the stitch and the thickness of the yarn.

We knit the next row. s / n threads of yellow color.

To do this, you need the fabric part, which was cut off earlier. On paper, you need to make a spout pattern using the dimensions of the cut out part.

According to them, we perform the calculation of loops and knit the nose of Art. s / n.

Advice! Record all your actions and performed calculations. This will help when knitting the second boot.

Now you need to sew or tie the s.s. spout to harness. Try on the product, you may need to adjust the number of loops.

The next step is knitting the heels. We carry out Art. s / n. We attach to the sides of the spout with the help of s.s. It will take about 2-3 rows.

According to the scheme below, we knit the bootleg.

First r. 3 v.p.p. 1 vp, 3 tbsp. s / n in the same loop of the base, * 1 ch, skip 3 loops, 1 tbsp. b / n, 1 ch, skip 3 loops, knit in the 4th (3 tbsp. s / n, 1 ch, 3 tbsp. s / n) *, continue from *, finish row 2 tbsp . s / n in the first loop and 2 s.s.

Second r. 1 vp, * 3 vp, now we knit 3 tbsp. s / n with a common base and top in art. b / n of the first row, again 3 ch, 1 tbsp. b / n in 1 cp between triplets. s / n from one base *. We continue from *, we finish 1 s.s.

We knit all subsequent odd rows, like the first, even - like the second. The pattern will go in a checkerboard pattern, shifting every two rows.

Shaft length - individual. We knit the last two rows of the pattern with a contrasting thread.

Then we tie with two rows of Art. s / n yarn of the second color. Now you need to tie the yarn "grass". For her, you can take a hook of a larger number.

Now we knit a strap for decoration with a yellow thread. First row st. b/n. second row st. s / n and the third row of art. b/n. The length will depend on the circumference of the ankle. Now we need to connect the chain of cp. black yarn of the same length as the strap, and insert it between st. s / n.

Sew on the strap. On the outside, decorate with a button. It remains to knit a pair of boots.

Option 2

For those who prefer refined and elegant simplicity, we offer the following options.

The principle of attaching to the sole and knitting is the same. You can use different colors as a decor by tying the boot tops with stripes or decorate with flowers.

Option 3

Crochet boots with scales pattern

This knitting option is also called "crocodile skin". Not a single animal will suffer, and you will become the owner of "crocodile skin" boots.

In this model, it will be necessary to attach the sole after knitting, since here we also make the insole with a hook. Of course, you can take the finished sole and do the manipulations described above for tying it. Then knit according to the spout pattern suggested below. Try, experiment.

We start knitting from the sole. The work will take place in a circle (or rather an oval, but the principle is the same). In order to calculate the number of air loops in the set, it is necessary to measure the length of the foot and its width. Now subtract the second from the first value. The resulting digit* will be the length of the initial chain. We knit a sample of 10 x 10 cm and calculate the number of loops * in one centimeter. We multiply two numbers with * and get the number of loops in the typesetting row.

So, a chain of c.e. recruited.

First r. 3 v.p.p. and another 5 st. s / n in the same base loop. Now we knit st. s / n. in the last loop we knit 6 tbsp. s / n and go to knitting on the second side of the typesetting row. We finish 1 s.s. in the 3rd v.p.p.

Second r. 3 v.p.p. + 1 tbsp. s / n in the same loop, in the next five loops we knit 2 tbsp. s / n with a common basis, then 1 tbsp. s / n. In 6 st. s / n knitted from a common base we knit 2 tbsp. s / n. on the second side of the oval we continue to knit st. s / n. We finish 1 s.s. in the 3rd v.p.p.

Third r. We already have a small oval. The narrow sides consist of twos of Art. s / n, knitted from one base, 12 loops from each edge. In these loops we knit 2 tbsp. s / n with a common base, alternating with 1 tbsp. s / n. It turns out 18 loops. Next, we knit 1 tbsp. s / n on the side wide sides.

In the fourth row, along the edges on 18 loops, we knit 2 tbsp. s / n with a common base, alternating with 2 tbsp. s / n. It turns out 24 loops. We knit the wide sides, as usual, without increments.

The size of the sole is determined individually. You can make a drawing of the foot and periodically try on the work.

When the sole is finished, we continue to knit the toe and heel without breaking the thread. Thanks to the elastic band pattern of embossed columns, the finished boot will fit snugly on the leg.

Below is an example knitting pattern. The pattern will be saved, only the number of loops in the rows will change.

We knit one (first) row with simple st. s / n without increments.

Second r. we knit in a circle with embossed purl (concave) st. s / n. Please note that in the diagram the wider rows are the heel and nose.

Third r. We knit alternating convex and concave columns. It turns out an elastic band 1 x 1. Follow the pattern. Periodically try on the boot to adjust the number of loops.

To move on to knitting the bootleg, it is necessary to knit 1-2 rows of simple sts. s / n.

We begin to knit the bootleg with a “scales” pattern. Work is done in a circle. Below is a diagram.

First r. 3 v.p.p. + 1 tbsp. s / n in the same loop, * 2 ch, skip 2 loops, 2 tbsp. s / n with a common base *, continue from *.

Second r. we knit in the opposite direction, using the bodies of twos of columns with a crochet as a basis. 3 v.p.p., 4 tbsp. s / n (we introduce a hook between two st. s / n. and the right column serves as the base) + 1 ch. + 5 tbsp. s / n (we introduce a hook between two st. s / n, and the left column serves as the base). For convenience, we turn knitting upside down. Every first 2 tbsp. s / n with a common base serve as an arch for (5 st. s / n + 1 VP + 5 st. s / n). Every second 2 tbsp. we don’t knit s / n with a common base, when moving between scales we perform 1 ch.

Third r. Turn knitting back. We knit similarly to the first row. Fourth r. we knit "scales" in a checkerboard pattern relative to the second row.

The height of the top will depend only on your desire. The last row to perform art. b/n.

As an additional decor, you can sew on the outer edge of the button.

Option 4

Crochet boots with funny pom-poms

We also carry out this model with a knitted sole.

You will need:

Thin and thick acrylic yarn;
Hooks No. 4.5 and No. 5.

The sole is knitted similarly to the previous model. You can choose any other oval scheme on the Internet.

We knit the last row without increments of art. b/n.

We knit the upper part not from the bottom up, but along one long and narrow canvas. With hook No. 5 we collect a chain of 17 ch. thread in two additions (thick + thin). We knit in return rows with a crochet No. 4.5 half-st. s / n for the back half-loop. When the length of the fabric reaches the length of the leg circumference (this is about 30 rows), we finish knitting. We connect the resulting tape into a ring. We fix the thread, cut it off and hide it.

We will knit the bootleg from the top of the boot, fixing the loops of the first row into the side stitches. s / n, they act as a set of rows. We knit in return rows.

First r. we knit, alternating 2 tbsp. s / n in 1 lateral semist. s / n and 1 tbsp. s / n in 1 lateral semist. s / n.

The second, third and fourth rows are performed with embossed st. s / n.

Starting from the fifth row, we perform the narrowing of the bootleg. To do this, select 4 symmetrical loops at an equal distance from each other. We knit this row. s / n, in the marked loop we perform 2 tbsp. s / n with a common top. We knit for the back wall.

From the 6th to the 9th rows we knit with embossed st. s / n.

10th p. We knit similarly to the 5th, reducing four loops at an equal distance.

The 11th and 12th rows are performed with embossed st. s / n.

We begin to knit the rise of the boot.

The beginning of the 13th row is the central point of the future heel. Select the opposite central point of the future spout. We also mark the loop before and after it. Now we knit st. b / n to the loop in front of the middle loop of the spout. Here we knit 10 ch. and knit in them 3 v.p.p. and further a number of Art. s / n.

We got a branch for the spout.

We fix this strip from Art. s / n on the shaft in the loop located after the third marked. We knit further Art. b/n. We finish 1 s.s.

The next rows will be performed in a circle. s / n.

14th p. At 3 v.p.p. we knit branches for the spout 5 tbsp. s / n. finish row 1 s.s. in the 3rd v.p.p.

15th p. performed similarly to the 14th, in 5 tbsp. s / n, knitted in an arch of 3 ch spout, we knit 2 tbsp. s / n with a common base. Now the width of the spout is already 10 loops.

We knit rows 16 and 17 without increments of art. s / n.

We turn the work and knit the 18th row of semist. s / n. we fix the thread.

Now you need to connect the parts using 1 row of s.s. The line will be embossed.

The seam of the connection of the upper part of the boot (it is located across the rest of the knitting) is located at the back. It is necessary to tie a chain of ch with a thread in two additions. about 1 meter long. Mark its center and fasten on this seam.

Attach 1 pom-pom to each end.

How to make pom poms

To create pompoms, you will need two cardboard circles. They need to cut out the central round part and a small piece along the radius.

We fold the circles so that all the cut parts match. Now we begin to wind the thread without breaking away from the ball. The larger and denser the winding, the fluffier and more magnificent the pompom will turn out. When you consider the number of turns sufficient, you need to cut the wound threads along the circle with scissors. Now you need to slightly separate one cardboard from the other, place a piece of thread in the resulting hole. Now we tie it around a bunch of threads, align the cut ends and remove the cardboard. Shake and get a cute pom-pom.

We attach them to the ends of the chains and tie them beautifully by making several turns around the leg.

On the street (especially in the warm season) you can often find crocheted boots. Yes, now this is far from uncommon in stores, but do such shoe models differ in any special originality? Those who have a crochet hook or knitting needles can try to make similar knitted stylish boots for every day with a crochet hook, also with their own hands. You can find a suitable pattern on the Internet or trust your imagination. Of course, two identical pairs of shoes will definitely not work. After all, such knitting can be compared with the manufacture of lace and openwork napkins. Another plus is that this option will come out much cheaper than similar boots in the store. It is worth noting that you can make such shoes both for going out and for home. Indeed, sometimes it is very pleasant to dress your legs in warmth on cold winter evenings. The best part is that making such boots is not difficult for either masters or beginners.

You will need:

The process of crocheting boots with diagrams and a description of the work

Knitting takes place in two strands, so that the boots later turn out to be boots (and not socks), and this will also serve to create a rather dense texture.

Sock:

Assembly.

Pre-sampling.

Some more useful information for beginners

You can knit boots of completely different lengths. You can wear them both as boots and as ankle boots. If desired, they can be decorated with ribbons, beads or embroidery. Let your imagination run wild. Between the rows, you can still draw a thin decorative braid. To prevent the boots from flying off, towards the end you can narrow them a little. And in order for the boots to keep their shape, it is necessary to wash and starch them after manufacturing. Now you know how to crochet stylish boots for every day! Creative success to you! And nice shoes!

A selection of videos on the topic of the article

Good afternoon friends!

Today, I will tell you how to crochet homemade boots. This will be a description of knitted boots for adults. And how to knit warm indoor boots for kids, I told in

Each of us has a house, but the floor in it is different for everyone. Some people are warm, while others are not warm at all. And it is not always comfortable for our legs to walk on the floor with bare feet or in socks, or in indoor slippers. I propose an original version and a cozy solution to this problem - knitted house boots. Knitted boots keep our feet warm and prevent them from sweating due to the presence of small holes in the pattern. But this does not mean that they will be cold. On the contrary, in house boots it will be comfortable and warm.

To knit home boots we need:

White-orange yarn (artificial wool) - 50 g.
Red yarn (artificial wool) - 30 g.
Purple yarn (artificial wool) - 30 g.
Blue yarn (acrylic) - 40 g.
White yarn (acrylic) - 40 g.
White yarn (grass) - 30 g.
Insoles - 2 pcs.
Hook for knitting No. 3.

Knit sole

When all the materials are ready, you can start. The first thing we will knit is the “knitted sole”. To make the sole, you need to take only white-orange yarn.

Row number 1. Make a chain of 30 air loops, later in the text we will call (carriage. pet.).

Row number 2. Tie a chain in a circle, making additions in the middle, knitting one side, we knit three loops instead of 1 loop. Knit three loops at the end of the row.

Row number 3. Knit in a circle, making additions of loops in the middle and at the end.

Row number 4. Knit in a circle making additions in each 8 loop.

Row number 5. Knit a row, making additions in every 10th loop.

Row number 6. Knit a row without adding loops.

Row number 7. We make additions of new loops at the beginning and at the end of 2 woz. pet.

Row number 8. Knit a row without adding loops. We knit the second sole in the same way.

Knit sole

We knit the main details of boots

Let's start knitting hexagons. To do this, use white yarn (acrylic).

We knit hexagons

Row number 4. Dial a chain of three carts. pet., knit a column from a single loop of the last row and a column from a column of the last row, connect all three elements with one loop at the top. Knit 2 cart. pet. and knit another column from the last column, a column from the loop, and a column from the column, connect all three elements into one (pyramid). Knit to the end of the row.

We knit hexagons

Row number 6. Tie without additions.

The detail is ready. Such details must be connected 6 pcs.

Hexagon

We begin to knit details for the tops of our boots. We use white yarn (acrylic).

Row number 1. Dial a chain of 10 voz.pet. and connect with the first loop.

Row number 2. Knit 18 double crochets from the middle of the first row.

Row number 3. Knit a chain of 4 voz.pet., From the first loop of the row, knit a column, one voz. pet., column, so alternate until the end of the row. The columns should be 18 pcs.

Row number 4. Dial a chain of three carts. pet., knit a column from a single loop of the last row and a column from a column of the last row, connect all three elements with one loop at the top. Knit 2 cart. pet and knit another column from the last column, a column from the loop, and a column from the column, connect all three elements into one (pyramid). Knit to the end of the row.

Row number 5. Knit from two carts. pet. last row three columns, from the next two carts. pet. knit also three columns, and from the third two carts. pet. knit 5 stitches. Alternate similarly 3,3,5 columns to completion.

Row number 6. Knit a row without additions. Tie half of the part with white yarn (acrylic), and the other half with white yarn (grass).

We knit another such detail. These details will be located at the back, shins.

Back leg detail

Then, similarly, we knit two more parts, only the 6th row - tie the part with white yarn (grass) completely. These details will go to the front of the lower leg.

Front leg detail

We collect knitted boots

Now let's start connecting the details and the knitted sole. This will require purple yarn.

We tie a hexagon without "grass" to the sole. We tie to this hexagon on both sides one piece connected without the use of white “grass” yarn.

We collect knitted boots

Connect the parts at the back, i.e. details should tie the entire sole. At the back we tie a part that is half knitted with white yarn “grass”. In front of the top, we tie a part that is completely tied with white “grass” yarn.

We collect knitted boots

Similarly, we connect the details of the second home boot.

When the knitted home boots are ready, we tie the insoles with a hook, this is necessary so that they last longer and do not wear out.

Tie insoles to boots

Knitted house boots are ready. My boots are 38 sizes. To get a smaller size, you need to knit smaller circles and the sole along the leg.

These boots can be worn around the house in all seasons. They will not only warm your legs with warmth and comfort, but will also delight with their beauty.

Crochet home boots

P.S. If you like knitting and you have kids, check out more tutorials on how to knit a variety of booties.

Beautiful and fashionable knitted boots are the trend of the last few years. Not only do they look amazing, but they are also very easy to use. But the price of such shoes for many fashionistas seems sky-high. Therefore, you need to connect them yourself.

Types of knitted shoes

We are all used to the fact that crocheted knitted boots are a kind of substitute for indoor slippers: simple, comfortable, fun, but not smart. In fact, indoor boots are a small part of a huge number of elegant knitted shoes.

Craftswomen have long learned how to make warm autumn boots that protect their feet well from the first cold weather. But you need to wear them in dry weather, so as not to get wet.

Knitted summer boots also look beautiful. They emphasize the slimness of the legs and hide their minor flaws. At the same time, there are several styles of such shoes. The most common - with a wide top and high stocking boots.

Openwork high-heeled boots just look unsurpassed on your feet. They are great for everyday wear to work, and as a highlight of an evening outfit.

All this wealth of models and styles opens up great opportunities for craftswomen who seek to improve their creations, focusing on someone else's experience.

Sole preparation

No knitted boots can do without a sole, whether it be indoor shoes or a model for the street. Therefore, it is necessary to properly prepare it, so that later the boots serve as long as possible.

Consider the option with a felt insole, and then we will clarify the nuances for the street sole.

At the beginning of work in the insole, it is necessary to make holes around the entire perimeter. We choose an arbitrary distance between them, depending on the thickness of the thread and the size of the hook. Holes can be punched either with an ordinary awl, which will complicate further work a little, or with a special device that many craftswomen working with fabrics and leather have.

We begin to braid our sole. For these purposes, a single crochet is ideal. We do everything very carefully, because this is how the base for our boots is formed. And the further service life of the product depends on its quality.

If you take the sole for street shoes, then it is better to punch holes in it not from below, but from the side. This will extend the life of the threads, which are quickly frayed from contact with hard road surfaces.

Indoor knitted boots

When the sole is ready, we can get to work. To begin with, let's pay attention to the fact that boots can be knitted both immediately from the sole, and then sewn on or tied when the main work is completed.

The model shown in the photo is made completely with single crochets, so that the shoes turn out to be moderately warm and light.

We carry out 4-5 rows, starting to knit from the first row, which we made on a felt insole. At the same time, we do not add loops to get a good and high side.

The next step is knitting the top. First, we make 2-3 rows in a circle, and then another 1-2 rows only in front of the future boot. When the desired width is reached, close both edges and connect them together to make a knitted slipper.

We will get a boot if we knit a few more rows of single crochets around the formed armhole for the leg. Their number depends only on the desired height of the "freebie" of our shoes.

Simple summer boots

Here is another simple knitted boots. The description of the work on them is a bit similar to the previous model, but there are some nuances.

They are also knitted with single crochets. Only now initially shoes are divided into three parts: toe, heel and shaft. First of all, we knit a sock, starting from the edge of the tied sole. We cling to each new row for the previously prepared edge. Here it is very important to add the right number of loops at the beginning of work so that the foot can fit freely in the shoes.

Having knitted up to half of the sole, we proceed to work on its back part. Here the direction of knitting changes. We hook each new row not at the base, because we started knitting from it, but at the front, as if connecting them together. It is important not to forget to leave an armhole through which the foot will be inserted into the shoe.

And the last stage is knitting in a circle, as in indoor boots, until the shaft reaches the desired height.

Motif Boots

For some models, the description of crocheted knitted boots suggests that these shoes can also be made from individual motifs. It is squares that are best suited for these purposes, since it is easy to fold the finished product out of them.

The motive for such boots is better to take not very large, so that it is easier to collect them all together. The next square is ideal for these purposes. We start knitting with a ring of 5 air loops. On their basis, 15 double crochets and one lifting chain of 3 v / p are made.

In the next row, the same number of double crochets are made, but between them there should be an intermediate air loop. Then 1 more row of double crochets is knitted. In the next row, there is a transition from a round shape to a square one. The diagram shows all the stages of work. An oblique cross indicates crossed double crochets, the second of which is knitted behind the first.

For one boot, you need to knit about 13 squares. Their specific number depends on the size of the shoe and the motive itself.

Collecting motives

It is not enough just to make the right amount of square motifs. We still need to put together knitted boots. The photo of the finished product gives a rough idea of how this is done.

To begin with, 12 motifs are sewn into a single canvas. It turns out 3 squares in height and 4 in width. Then they are sewn together into a continuous pipe, but the two lower motifs remain free. This is exactly the place where the 13th square is inserted

This is done quite simply. We put the unfinished canvas on the surface, push the squares apart and insert a free motive between them. When it is sewn on one side, turn it 45 degrees and sew not the opposite side, but adjacent to the one that was sewn earlier.

If you figure it out, it turns out that we inserted the last motive into the boot at the corner. Thus, the sock turned out. Now it remains only to sew the finished product to the sole.

Don't forget to decorate

Any footwear should be not only practical, but also beautiful. This is confirmed by many photos of crocheted knitted boots. It is extremely important to pay special attention to their decor. But this issue should be approached carefully.

The thing is that the number and brightness of decorative elements depend on the chosen pattern. If a lot of openwork elements are used, then heavy decor can "steal" the positive effect. In this case, it is better to prefer a light organza bow, which will only add airiness to the product.

If the pattern is practically absent, then you can experiment a little. In the example with street boots with a single crochet, the author added a maximum of colors. From this, the boring pattern is practically not noticeable, but bright juicy stripes are striking.

Lush pompoms can be added to autumn boots of this type. They will not only decorate the shoes, but also help control the width of the bootleg if they are passed around the circumference of the boot.

Combined boots

We looked at how to make crocheted knitted boots from individual motifs and a solid product from the sole. The last option left is the combined one. In this model, the lower part is made from separate motifs. This helps to create better legroom. But the stocking itself is knitted with a different openwork pattern, after the lower part is sewn to the sole.

This approach provides a more accurate fit of the product to the size of the foot, since the stocking boot must fit perfectly. As a pattern, you can choose any openwork pattern. Therefore, it makes no sense to describe specifically this model. Moreover, the scheme here is designed for a high level of skill, which can prevent novice craftswomen from correctly fitting the stocking to the desired size. To prevent the top from slipping during wearing, you can knit a rubber band at the top or sew on a silicone ribbon.

Proper care

Any footwear requires a careful attitude. This is very important, because it is constantly in contact with pollution: dust, grass, resin, berry juices. Knitted boots are especially sensitive to this. That is why they need to be properly looked after.

Wash them in lukewarm soapy water only, try to twist them as little as possible, and dry them on the surface, not hanging.

And best of all - wear these boots as an exclusive addition to your festive outfit to feel like a real queen at any celebration.