How to make a men's leather bracelet with your own hands. How to make DIY leather bracelets

Bracelets are one of the most popular types of jewelry. Therefore, many fashionistas and fashionistas want to know how to make a leather bracelet. In order to please yourself or a friend with a stylish decoration, first of all, you should find suitable schemes.

Such diagrams clearly show what the finished product will look like:

And also answer the question of how weaving occurs:

How to make a leather bracelet for men

Men's bracelets are most often woven from leather. They look elegant, courageous and even a little brutal. The jewelry weaved by you will be the best gift for your loved one. And in order to make your work easy and enjoyable, below is a step-by-step master class on leather products.

You will need:

1) A small piece of leather;

2) A set of buttons;

3) Button insert kit:

4) Hammer and knife.

Sequencing:

1) Prepare a piece of leather, cut it to the desired shape according to the length of the wrist.

2) We fix with a pin the place where we want to make a button.

3) Remove the bracelet and lay it out.

4) We lay out the buttons and nozzles on them.

5) In total, you will need four types of buttons with nozzles.

6) We make punctures on the skin in those places where the pins were. You can use a gypsy needle.

7) We expand the hole. Insert the rod and hit it with a hammer.

8) You should get such a hole.

9) We make the same hole on the other side.

10) We put nozzles on a plastic plate.

11) Insert the button.

12) Insert the bottom of the button. It needs other tools.

13) We put nozzles on the plate.

14) Insert the button like this.

15) It should turn out like this.

The bracelet is ready.

You can decorate the product with another button.

How to make a leather bracelet for women

Leather bracelets on the hands of women look very original. They go well with jeans and sportswear. Women's jewelry is more elegant and refined than men's. They are usually thinner and more difficult to manufacture. Today we invite you to get acquainted with the weaving of a very simple and original women's leather bracelet.

You will need:

1) Thin belt.

2) Chain.

3) Scissors.

4) Hole punch.

Sequencing:

1) Cut out two rectangles from the belt.

2) We cut out the arrows from the skin, it is possible according to the template.

3) We make two holes in the arrow and stretch the chain into them.

4) We wrap the chain around the wrist, cut off the excess.

History of leather jewelry: myths and truth

Leather jewelry is easy to make and very durable. Your young man will be able to wear them for many years. And every time he puts on a bracelet, he will think of you.

Bracelets, both men's and women's, have a long history of existence. A thousand years ago, in the north of Russia, birch bark jewelry was made. And in distant southern states they made similar products from bird feathers.

Leather bracelets do not have such a deep and ancient history. However, their story can get a little scary if you consider one thing. Now in some countries of Africa, Australia and the distant lost islands of the Pacific Ocean, natives living in wild primitive tribes wear very strange bracelets.

These wrist ornaments are made from the tanned hides of animals as well as the dried skins of enemies. It is a symbol of strength, power and victory.

Men's leather jewelry has a rich history, they trail a trail of mystery, bloody battles and fierce battles. Therefore, women consider them very beautiful and sexy.

Women rarely wear this kind of accessories. They are preferred mainly by ladies dressing in a sporty style. These beauties look very good in sports jackets, jeans and sneakers. And leather jewelry suits them amazingly.

A selection of videos on the topic

Leather bracelets are versatile accessories that have been in fashion for several seasons and remain popular. Women's baubles are woven and flat, because the preferences of girls are different. But many agree that handicrafts are interesting and look much more original than those sold in stores.

They come in different colors, sizes and shapes, you can use a wide variety of weaving patterns and a huge selection of methods for weaving leather products.

Such products can look both elegant and extravagant. It depends on the weaving method. How to learn to weave leather bracelets? First you need to purchase small pieces of leather and cut them into strips. There are many weaving patterns, but it is better to start with the simplest ones.

Braid bracelet

This is one of the simplest and most elegant solutions for a leather bracelet.

Weaving products can be done in several directions.

Wrap a long leather strap around your wrist and add 2 centimeters to this length, this should be enough. The width of these strips can be different. You can try to weave from narrow strips with a width of 1.5 to 3 centimeters;

Using a hole punch, make holes at the ends of the strips;
In the holes, you can fix a metal button or thread laces through them. These are standard ways to fix the ends of products;
This blank can also be decorated with rivets or patterned holes;
Then, you should weave a traditional braid of three strips.

You can weave a slightly unusual braid in a different way

Using a ruler, a wide leather ribbon should be divided into three parts of the same width and evenly cut along, but not completely. The ends can be decorated with decorative buttons;
As a result, you get three stripes, from which you need to weave a braid: No. 1 - on the left, No. 2 - in the middle, No. 3 - on the right;
You can start weaving. One edge of the bracelet must be passed between strips No. 2 and 3 and lowered down. As a result, the stripes will be twisted;

Then you need to pass the edge of the bracelet between strips No. 1 and 2 and lower it down;
We repeat the previous steps one by one until the bracelet is ready;
The last step should be to straighten the bracelet.

Different types of leather behave differently depending on its softness, dressing and thickness. Some bracelets will turn out tight, some more loose, it all depends on the technique and quality of weaving, as well as on the skin and its plasticity.

If you have mastered one version of leather weaving, you can continue to learn how to weave bracelets using various techniques.

Baubles with embroidery

You can add a leather ribbon decorated with appliqués, colored threads or interesting studs to a thin woven bracelet.

This can be a strap about 3-4 cm wide. You can buy special leather for baubles or take an old belt, bag or upper part of a soft old boot.

Leather can be black, it will contrast beautifully with bright embroidery, brown leather also looks beautiful and stylish.

You should also stock up on metal embellishments, such as heart-shaped ones, which can be purchased at any craft or scrapbooking store.

You can embroider with thick stitches of bright thread or decorate the product with decorative elements. Such a product can be fastened with an ordinary button.

How to weave a bauble out of leather

You will need:

narrow strips of leather or leatherette of any color;
thick cord or wire;
lighter;
large lock with a hook;
scissors;
Super glue.

How to weave a bauble:

Cut a piece of wire or lace 15 cm long;

Scorch the ends of the lace with a lighter or other fire;
Make a loop;
Using glue, you need to attach the loop to the surface on which you will weave the bracelet;
Insert the leather cord ok under the wire;
Braid the wire like a double flat knot used in the macrame technique;
Repeat until you have tied the entire cord. Knots can only be placed on one side or on two;
Cut off excess cord;
Glue the lock at the end, hiding the ends of the wire and both ends of the leather strip underneath.

It is not at all difficult to learn how to weave various leather accessories. Such products are probably not suitable for a business lunch or a trip to the theater, but in other cases, they can be actively used as an interesting accessory.

They will look especially good with country, casual or ethnic style clothes.

Girls, summer is coming and wouldn't it be time to take care of updating the jewelry box? I propose to start today with a couple DIY leather bracelets- They are easy and simple to make. Interested? Then let's go gutting Mom's old leather jackets and Dad's belts. The only request - do not succumb to nostalgia for parenting and cut your father's straps into thin stripes. Go.

Option one.

This is a braided bracelet. Delicate, beautiful, thin. He asks for a pair in his hand, so I advise you to immediately weave a few pieces. To make it, you can buy a blank made of leather, or you can make it yourself: Cut a wide strip of leather in two lines along, and put buttons on the ends with an awl.

Now is the time to start weaving. Pass the lower end of the bracelet alternately through the honey with three strands and straighten the twisted strips so that the bracelet is flat.

Each of the braided bracelets differs only in the thickness of the braids. Don't worry if you can't weave the bracelet the first time. Train and become a pro.

Option two.

This bracelet is made in pastel lavender colors. It is gentle and thin. Perfect for spring and summer outfits.

We will need:

white, light green and lavender thread (about 40 cm each)
strip of white leather (40 cm)
silver chains about 20cm
silver plug with clasp
scissors and glue

Step 1: Cut the thread into nine pieces about 20 cm, two for each color (green, lavender, white and white leather) and a silver chain. Put them in groups of three, as in the photo. Fasten the edges of the ribbons.

Step 2: Start weaving. To get an even pattern, make sure that the multi-colored threads remain in the middle of each strand.

Step 3: When you get to the end, secure before cutting off the ends. Glue the ends of the bracelet and clasp together.

Step 4: If the bracelet is too short, extend it with a chain.

That's it - your bracelet is ready!

Option three.

For this bracelet, you will need some sewing machine skills, but the result is worth it. In our version it is white and pink DIY leather bracelet, but you can swap colors and choose a different composition.

So, get ready to go:

scissors, knife;
a piece of white leather measuring 3x25 cm;
dense pink fabric;
hooks;
ruler;
sewing machine.

Cut the skin into nine strips 0.33 cm wide. Divide the strips into three parts: three strips each and weave the braid.

Fold the pink fabric as shown in the picture and sew it to the skin. Fasten the hooks. Everything, the bracelet is ready - it's time to show it to your girlfriends.

Option four.

This bracelet is fundamentally different from the previous three in that it is not woven with braids. Measure your hand and calculate the length of the leather strips (you will need two of them). In addition to them, stock up on coarse thread and follow the instructions shown in the figure. Good luck.

Option five.

This cute bracelet contains a lot of elements: braided braid, stones, and even chains. I recommend you be well prepared.

Materials:

knitted fabric
thread, needles, pins
scissors
ruler or tape measure
leather cord
thin metal chain
2 wooden beads
2 clasps
jewelry pliers

Following the instructions in the photo, you will get a beautiful bracelet. Remember to measure your wrist at its widest point - at the thumbto know the exact length of your bracelet.

Jewelry and accessories made of leather always look very interesting. For any style of clothing, you can choose the right product. and with their own hands from the remnants of the skin from old unnecessary things. For example, it will take only half an hour to weave a leather bracelet, and you do not need to have any special skills or tools.

Leather of any dressing and color is suitable for such a stylish decoration: a simple pigtail-shaped bracelet will look great both from rough thick leather and from thin, well-dressed.

To make a leather braid bracelet you will need:

DIY leather bracelet in the form of a pigtail: a master class

On the wrong side of the leather cut, use a pen and a ruler to draw a “pattern” of the bracelet. The length of the pigtail bracelet should be at least 19 cm. You need to make two cuts along the middle (not reaching the edge) to get three cords. The width of the cords is 3-6 mm (the thinner the skin, the narrower the cords should be), respectively, if the width of the cords is 4 mm, then the width of the bracelet will be 1.2 cm. The length of the slots themselves is 16 cm.

Cut out the blank with sharp thin scissors.

You can start weaving. It is more convenient to put the workpiece vertically, mentally number the cords from left to right 1, 2, 3.
Weaving consists of repeating four steps.

Step 1. Unscrew the lower part of the bracelet between cords 2 and 3.

At first glance, such an “abracadabra” should turn out.

Step 2 Gently straighten the cords to get the weave: 1st to 2nd, 3rd to 1st, 2nd to 3rd.

Step 3 Turn the bottom of the workpiece from front to back between cords number 3 and 2.

Step 4 Distribute the weave neatly upwards, as a result, the initial arrangement of cords 1, 2, 3 should be obtained.

Repeat steps one through four. As a rule, a double repetition of the steps is enough for such a length of the bracelet to get a neat finished weaving with a pigtail. Spread all the cords evenly with your hands.

Round the edges of the workpiece with scissors, make holes for fastening on each side of the leather bracelet with an awl.

For a lock connection, you need a thin leather cord: cut off a strip of leather about 20 cm long and about 3-4 mm wide with scissors.

Now, for a lock-connection, it is necessary to glue a blank from several small pieces of leather (size no more than 1.5 × 1.5 cm). In general, it is better to do this procedure in advance (a day in advance), because it takes about 24 hours for strong bonding.

When the stack of leather pieces is glued together, trim the edges in a circle, for a neater look, you can sand the edge. In the middle, make a hole with an awl (you can pre-heat it).

Pass the prepared thin cord through the holes on the edges of the bracelet (from the inside to the front side). This is where tweezers with sharp and thin edges will help very well, because you need to thread the cord in such a way that the holes do not expand much, otherwise the mount will not be tight.

Then also thread the ends into the prepared circle of leather, measure the required length of the cord, cut and tie knots at the ends.

Do-it-yourself leather bracelet in the form of a pigtail is ready.

A leather bracelet will look even more interesting if you weave it so long that it goes around the wrist several times.

The option is more complicated - make the bracelet wider, for example, by 9 cords, but weave in the same way, dividing the cords into three groups.

How to make weaving from leather? How to learn quickly? How to become a master and give beauty to yourself and your loved ones? We'll talk about this in the article. Fashion does not stand still. Very often in magazines, at fashion shows, leather dominates. Previously, leather products were reflected in clothing, but recently leather accessories are gaining popularity. Consider the basics of working with the material.

Needlework progress

The history of leather work is quite interesting. Processing began to be practiced from the Stone Age, when clothes made of skins, belts, belts and bags gradually appeared.

Weaving is a variant of leather processing, where craftsmen combine several techniques to create a product. Often in jewelry practice there are woven macrame elements made from lace.

What can you create from? It is easy to use unnecessary leather things. For example, gloves, briefcases, etc. But do not forget about the quality of the material. Pay special attention to thickness, elasticity and coloration. It will be more difficult to work if the product has a pattern or some kind of ornament.

But the masters advise not to remake the old into the new. It is better to spend money on new leather so that the accessory is worn longer and is attractive. Each thing has its own expiration date, so often unnecessary things can ruin all the work. Leather is sold in specialized stores. I am glad that there are many colors and options for products.

For beauty

It is easy to make bracelets with your own hands, which are becoming more and more popular. Such products look elegant and beautiful. It all depends on weaving. You need to purchase pieces of skin that will become the basis and cut them into strips. It requires few materials and a lot of attention to make.

So, let's begin. Consider several weaving options that are suitable even for men. The first option is a pigtail bracelet.

It is thin, delicate and looks beautiful on the hand. Such an accessory is multifunctional, because it can be worn at any time of the year.

We need a leather blank. If there is none, then cut a wide strip of leather, put buttons at the ends, as the diagram shows.

Depending on the fittings, the style of decoration changes.

The second option is "Women's Secrets". The accessory is suitable for bright summer outfits. You can choose the color yourself, for all the will of ideas. The technique is simple, even a child can handle it.

Take a thread of three colors, a strip of leather, several chains, a plug with a clasp, scissors and glue.

We cut the thread into 9 parts (20 cm in two pieces). We lay them out in threes, after fixing the edges.
We start to weave. Follow every movement so that the product is even and beautiful.
At the end, pay attention to the clasp. Fasten the bracelet before trimming the ends. Lubricate the ends of the bracelet and clasp with glue. Accessory is ready!

To make sure it works correctly, look at the photo:

The third option is an unusual braid.

To get a wicker product, we take three identical leather ribbons.
Remember the numbering of the strips: 1-left, 2-in the middle, 3-right.
We start weaving. We pass the edge of the product through No. 2 and No. 3, lower it down. The stripes are twisted.
We pass the edge between No. 1 and 2, lowering down.
We repeat the previous movements until the end of work on the product. We straighten.

Types of bracelets masters are divided into categories. They differ in design.

Thin and thick accessories:

Accessory with buttons, clasps:

With patterns or rhinestones:

With several turns around the wrist:

In addition to the usual weaving, there is a circular weaving. In addition to thin skin, you will need a rope. It is she who is braided with cords.

Progress:

There are four birch cords about 2 cm long. We are preparing a rope of the same length. Pay attention to the diameter - from 3 to 5 mm.
With glue (preferably "Moment") we connect the ends in a circle (in length - 15-20 mm). We fix the place of gluing with a thread.

We divide the cords into two parts. Remember the left and right parts, mentally numbering. We take the left in the left hand, and the right - in the right.
Let's use a schema.

When the length is about 130-140 mm, then we fix the end with a thread.
Lubricate the non-woven ends with glue. Leave to dry.
Flatten the ends of the tubes. Make a place for the fixer, install.

Here is a result that looks like a whip:

Leather bracelets are not eternal, because they are made of delicate material. High-quality products are not always found in stores, so check its strength at the time of purchase, the presence of excess - threads. Of course, the leather belt also needs to be checked. Often they can wear out, wipe out and lose their shape. It is dangerous to buy products in online stores, there is no way to check the quality and verify the authenticity of the brand. Try to make your own accessory. It's easy to enjoy the job. But it is even more pleasant to wear a thing made by yourself.

Video on the topic of the article

The creation of woven leather products is an art that came to us from ancient times, at first glance it seems incredibly complex and incomprehensible. However, this is not at all the case, because there are a lot of types of weaving, and they all differ in the complexity of execution. For items such as belts and bracelets, the most common ways to weave leather are braid, braid, and single puzzle. Today we will tell you how to make accessories woven from leather material with your own hands. If you decide to make something out of leather yourself, then you will definitely need the lessons on how to weave leather, presented below.

Jewelry made of leather or leatherette is suitable for both men and women.

Circular braiding method

Any technique of weaving four cords, including this one, shrinks the skin. For this reason, it is better to cut the laces slightly longer than necessary. As for the thickness, it is recommended to use a thin cord for circular weaving, because the product will turn out to be more voluminous.

Cut four cords and tie the ends together. For convenience, we will denote them as A, B, C and D starting from the left and ending with the right. Fix the blank on the paper holder, or by gluing it to the table with tape.

To avoid confusion, for the first time it is better to weave from multi-colored laces, or mark each one by tying a colored thread to it.

Weaving a voluminous bracelet

Weaving begins with cord D. Bring it to the left over B and C, so that the order changes to A, D, B, C. Then move B to the left, behind D, to make A, B, D, C. Throw A-lace to the right over B and D, then interlace with cord D. If done correctly, the ends of D and A will be in the center, B will be on the left, and C on the right.

Take B and A in your left hand, and D and C in your right hand. Pull them in different directions to tighten the weave. Draw cord C over D and A, then move A to the left through C. Move cord B to the right through A and C, and C, in turn, through B. Tighten the weave again, spreading the pair of laces to the sides.

Repeat all the steps several times until you get the desired length of the product. Finishing work, tie the ends of the laces. Special fittings, such as end clips or ready-made clasps, are ideal for connecting braided cords into a bracelet.

Single puzzle method

Cut a long strip of leather and cut longitudinal strips in it. The ends must remain intact. You will get a strip of leather cut into three cords.

Fix one end of the strip in place. Pull the lower end towards you, and then pass it between the 2nd and 3rd stripes - this will make weaving easier. On top of the braid, wind the first cord onto the second, and then pull it between the second and third. Throw cord 3 through the first, the second through the third. At the end, pull the end of the weave back on yourself and pass it between the laces 2 and 3.

Repeat these steps following the pattern until you are done. At the end, make a loop again by pulling the strip between the cords.

To make women's bracelets, add various beads, rhinestones and other details to the weave.

Weaving a leather whip

To weave a whip yourself, you first have to cut the skin to prepare the first knee (the one below). It is better to weave from thin strips 5-7 mm wide. A knee may consist of 5 or more stripes. It is advisable to use long and straight stripes.

Before you start cutting, mark a piece of rawhide, marking a strip equal in width to all the strips, and step back from the end 5-10 mm for fastening.

The lower knee is woven like this: spread the strips to the sides and alternately weave them, weaving the strips either on the right or on the left. Make sure the pattern is symmetrical. The knee should gradually thicken. To do this, add an insert made of rawhide or similar material to the middle of the weave. About 5 cm before the end, stop increasing the diameter of the weave and weave another 8 cm without the liner.

The next parts of the whip should be thicker than the previous one. To do this, either increase the volume of the liner, or the width or number of stripes. The whip is made from an ordinary stick. You can cut various patterns on it, or leave the surface flat - as your fantasy tells you.

Braided strap

Using various weaving techniques, you can make a variety of leather accessories, including a belt. Prepare 3 shoelaces made of leather, leatherette or suede, each about 5 meters long. A round steel ring is suitable as a buckle. You will also need superglue.

Fold the laces in half, forming a loop - you need it to secure the buckle. The last cord on the right will be the basis of weaving.

Tie a knot by stretching the cord as shown in the photo. Tighten the ends well. Weave the rest of the knots in the same way.

Next, turn the main cord to get a wavy pattern. Continue to knit knots, now in the direction from right to left. Weave as much as you need. If the cord is too short, lengthen it with glue.

The creation of leather bracelets is reminiscent of something primitive - of the times when the first people invented jewelry. Now such jewelry is at the peak of popularity, symbolizing freedom and non-recognition of the rules.

Try making your own leather bracelets to subdue fashion trends.

Selection of materials

Craftsmen who make leather bracelets with their own hands know that each needlework scheme requires a certain type of material.

For example, if you want to create wide symmetrical or asymmetrical bracelets with a minimum of jewelry, you will need thick rough leather - saddlecloth and crust. Most often, men's bracelets are obtained from saddlecloth.

If you need thin woven bracelets and baubles, choose soft leather ribbons, like suede or yuft - they bend and stitch well.

Make a wide blank, which you decorate with many ribbons and stones, from leatherette - it is soft and easy to process with needles and hole punchers. In addition, leatherette is much cheaper than natural material.

Women's bracelets

In the last few years, world-famous designers have introduced fashion for leather bracelets. Lines lined up in jewelry stores to buy Chan Lu leather bracelets with natural stones, nuts and rivets.

But after all, handmade jewelry is in no way inferior to the originals! Try it, it's very simple.

Leather bracelet with beads

The embellishment consists of several strands of suede, bracelet clasps with flat clips, and beads with holes large enough to fit your laces through.

Prepare the required number of pieces of lace, equal in length to the size of your wrist + margin for knots.

Clamp one side of the laces with the clasp clip.

On one of the threads, start stringing beads with your own hands, securing them on both sides with knots. Do the same for all other threads.

After completing the process, secure the free ends of the laces with a clip of another clasp.

Your bracelet is ready! To diversify the appearance of the jewelry, use several types of beads, alternating them on a thread or putting each new type on a new cord.

Braided bracelet with chain

These leather bracelets can be worn not only with casual wear, but also worn for special occasions due to their sparkling appearance. Beaded bracelets are woven in a similar way, which are also versatile in wearing.

In the process, you will need clasps for the bracelet with ring fasteners, 1 long piece of suede ribbon and 1 thin gold chain.

Pass the ribbon and chain through the ring of the first part of the fastener. Arrange them so that you have 2 side leather laces and a double chain in the middle.

Start weaving with your own hands an ordinary three-strand pigtail.

After weaving is completed, fasten the parts of the bracelet in the ring of the second clasp.

Now you can put on your leather bracelet. You can thicken such bracelets by fastening together several similar weaves at once.

To learn how to weave the popular Chan Lu leather bracelets with your own hands, check out the following video tutorial.

When creating such bracelets with your own hands, round or faceted natural stones are used. They are easy to replace with cheaper plastic beads that look like turquoise, coral or pearls.

All women's leather bracelets can be worn with sports, casual, safari and marine styles, that is, with clothes for nature, walking and relaxing in neutral tones similar to the skin color on the bracelet.

Bracelets for men

Men's leather bracelets are distinguished by their simplicity and conciseness compared to women's. Often the maximum decoration of such jewelry is rivets, spikes or types of weaving.

Now you will try to make a woven men's leather bracelet with your own hands. During work, you will need a piece of leather 5 centimeters wide and about 20 centimeters long.

Draw a pattern for the product on the back of the leather. The length of the bracelet must be at least 19 centimeters. In the middle, make 2 cuts that do not reach the edges by 1.5-2 centimeters.

Lay the blank vertically and mentally or with an erasable pencil number the cords from one to three. Pull the bottom edge of the bracelet between 2 and 3 cords.

Straighten the cords as you progress the weaving. Continue weaving in the following order: the first cord with the second, the third with the first, the second with the third.

Bring the bottom of the blank with your hands forward between the third and second cords.

Adjust the cords again so that the lines descend to the bottom of the workpiece in the correct order - the first, second, third cord.

Repeat steps two through four. You should have a finished braid.

Give the desired shape to the edges of the bracelet and make holes with an awl.

Set the bracelet aside. To fasten, glue together several pieces of leather and leave to dry for a day. When the workpiece dries, round the edges, make a hole in the middle and smooth out the bumps with sandpaper.

Pass a thin leather cord through the holes in the bracelet. Pull both of its edges through the resulting leather nut. Tie the ends of the cord in knots.

Weaving is quite simple in execution, so it will be possible to master it the first time.

The jewelry will be a welcome gift for your man. These bracelets are perfect for casual street style. Quality work will even go well with classic-style suits if you are heading to an informal meeting. But at a gala event it is better to appear without a bracelet.

Children's bracelets

Children love to imitate adults by decorating themselves and putting on parental clothes. Make DIY leather bracelets for a little fashionista or fashionista that will attract a child with a bright design. Such bracelets will be able to compete in popularity even with well-known rubber band bracelets.

You will need a long thin leather cord and bright floss threads. This decoration is universal - depending on the colors of the threads you choose, it can be given to both girls and boys.

Wrap the bracelet loosely around your wrist 2 times and add tie allowances. Cut off the measured length.

Secure the cord with tape. At a distance of approximately 5 centimeters, drip glue and attach the first color of the floss. Start winding the thread tightly around the cord until you reach the distance you need. Place a drop of glue again and secure this thread.

Start wrapping the bracelet with a thread of a different color. Continue alternating colors until you have braided about 2 inches of the bracelet. Secure the last color of the floss with a needle and glue.

Knot the rest of the cord around the second side of the cord. The knot must be strong, but the cord must pass through it freely.

Repeat the previous steps on the other side of the cord and tie the cord again.

To make it easier for you to make strong knots on a leather thread, wet it with warm water and remember well to soften and give elasticity.

Kids will easily wear such jewelry to kindergarten, school or for a walk. And thanks to the bright design, the bracelets are suitable for any everyday children's clothing. But with elegant dresses and formal suits, it is better not to wear them.

Hand jewelry has been relevant at all times. Today, a variety of jewelry made with your own hands from improvised materials is in fashion. You do not need to master any special techniques and skills, there are many ways to make an original piece of jewelry in a few simple steps. How to make leather bracelets with your own hands using different techniques?

What materials are needed for the bracelet?

The main material - leather, natural or artificial - depends on the chosen technique. Any old leather clothes, bags or even soft tops from boots and other shoes will do. You can make elegant thin bracelets from leather cord or use it for weaving. Accessories are also needed - fasteners, rivets and some decorative elements. You can use scrap of obsolete jewelry - beads, fragments of chains, rhinestones and crystals. In order to make leather bracelets with your own hands, you will also need tools. A sharp knife or scissors is needed to give the skin the desired shape. An awl, needles, wire cutters, and other tools may also come in handy, depending on what materials will be used.

Weaving leather bracelets: simple and beautiful braids

To create a pigtail bracelet, you will need three laces or strips of material. We fasten them together and weave a classic braid. We fasten the ends, sew or otherwise fasten fasteners. Another way is to take a fairly wide strip of leather, cut it into three parts in the middle, but leave it intact at the ends. Weave these three separate parts, as if turning the elements of the strip inside out. It is much easier to attach fasteners to a decoration made using this technique, the weaving will turn out to be more even. You can additionally decorate the bracelet with metal pendants or other decorative elements. Making jewelry will take a few minutes. Using this technique, you can make women's or men's leather bracelets.

Rigid weaving

If you have thick vegetable tanned leather, you can make a miniature copy of the trouser belt on your hand. Cut off a suitable strip of leather, choose a fastener - it is better that it be a buckle or buttons. Leather bracelets made with this technique can be decorated with special paints suitable for use on the base material, rivets or other elements. An interesting effect can be achieved by applying several decorative thin leather laces or strips to the main canvas of the bracelet. You can also make curly holes, a pattern of eyelets, or something else.

We make leather bracelets: with our own hands, but on a ready-made basis

If only thin leather or a substitute is at hand, a wooden blank for a wide bracelet will help out. On the base we glue a strip of leather on the outside or we fit the entire bracelet. If desired, you can combine several separate pieces of leather by gluing them with an overlap or connecting them with decorative seams.

They come in different colors, sizes and shapes, you can use a wide variety of weaving patterns and a huge selection of methods for weaving leather products.

Braid bracelet

This is one of the simplest and most elegant solutions for a leather bracelet.

Weaving products can be done in several directions.

Wrap a long leather strap around your wrist and add 2 centimeters to this length, this should be enough. The width of these strips can be different. You can try to weave from narrow strips with a width of 1.5 to 3 centimeters;
Using a hole punch, make holes at the ends of the strips;
In the holes, you can fix a metal button or thread laces through them. These are standard ways to fix the ends of products;
This blank can also be decorated with rivets or patterned holes;
Then, you should weave a traditional braid of three strips.

You can weave a slightly unusual braid in a different way

Using a ruler, a wide leather ribbon should be divided into three parts of the same width and evenly cut along, but not completely. The ends can be decorated with decorative buttons;
As a result, you get three stripes, from which you need to weave a braid: No. 1 - on the left, No. 2 - in the middle, No. 3 - on the right;
You can start weaving. One edge of the bracelet must be passed between strips No. 2 and 3 and lowered down. As a result, the stripes will be twisted;
Then you need to pass the edge of the bracelet between strips No. 1 and 2 and lower it down;
We repeat the previous steps one by one until the bracelet is ready;
The last step should be to straighten the bracelet.

If you have mastered one version of leather weaving, you can continue to learn how to weave bracelets using various techniques.

Baubles with embroidery

You can add a leather ribbon decorated with appliqués, colored threads or interesting studs to a thin woven bracelet.

This can be a strap about 3-4 cm wide. You can buy special leather for baubles or take an old belt, bag or upper part of a soft old boot.

Leather can be black, it will contrast beautifully with bright embroidery, brown leather also looks beautiful and stylish.

You should also stock up on metal embellishments, such as heart-shaped ones, which can be purchased at any craft or scrapbooking store.

You can embroider with thick stitches of bright thread or decorate the product with decorative elements. Such a product can be fastened with an ordinary button.

How to weave a bauble out of leather

You will need:

narrow strips of leather or leatherette of any color;
thick cord or wire;
lighter;
large lock with a hook;
scissors;
Super glue.

How to weave a bauble:

Cut a piece of wire or lace 15 cm long;
Scorch the ends of the lace with a lighter or other fire;
Make a loop;
Using glue, you need to attach the loop to the surface on which you will weave the bracelet;
Insert a leather cord under the wire;
Braid the wire like a double flat knot used in the macrame technique;
Repeat until you have tied the entire cord. Knots can only be placed on one side or on two;
Cut off excess cord;
Glue the lock at the end, hiding the ends of the wire and both ends of the leather strip underneath.