How to make shoes waterproof? Shoes get wet - what to do? How to impregnate leather shoes so they don't get wet

Shoes that leak water can cause a severe cold. How many times have I been seriously ill, lying at home with a fever and a sore throat, getting my feet wet on the street. The question arose before me of what to do to make my shoes and boots waterproof.

I want the shoes to last as long as possible and be waterproof. Accordingly, constant care is required and water-repellent impregnation is necessary, which I do with my own hands. Now I treat even new shoes with a product prepared at home.

It is very important to regularly apply a waterproof coating to prevent moisture penetration on your shoes, be it melted snow or spring and autumn puddles. I’ll tell you how I prepare and apply shoe moisture impregnation step by step with a photo.

It’s not difficult to prepare moisture-resistant impregnation; I think you’ll find candles at home. Castor and linseed oil can be bought at the pharmacy.

Castor oil - 2 teaspoons
Flaxseed oil - 2 teaspoons
Paraffin - 1 teaspoon (candle grated)

Flaxseed oil is good for health. It is used for cosmetic purposes to improve facial skin, so the oil will not go to waste if there is a residue left in the bottle. Castor oil is useful for lubricating eyebrows and eyelashes for rapid growth. These products will make our shoes healthier from getting wet and are necessary for the beauty of women.

How to prepare impregnation for shoes

Processing my boots is not a difficult job at all, the main thing is to follow the sequence of actions and it will take very little time.

I have different candles at home. We grate it on a fine grater and get crumbs.

Add two teaspoons of linseed and castor oil to the dishes, add one heaped teaspoon of paraffin.

Stir until completely dissolved and heat on a steam drum.

Let the mixture cool to a warm state. Pour the resulting mass into a prepared jar, possibly from a baby food jar, or an empty cream jar.

How to properly treat shoes

Before processing shoes, they must be clean and dry. First, I clean the dirt from my shoes with a dry brush and an old toothbrush will do for cleaning the soles. I don’t throw away used toothbrushes; they come in handy for helping with many household chores.

Then, with a damp cloth or foam sponge slightly moistened with a solution of laundry soap, I wipe the top and bottom of the shoes, the seams of the shoes and let them dry before the next processing step.

Before applying the prepared product, I will run a hot jet of hair dryer over the entire surface of the shoes for better absorption and the formation of a protective layer.

I take a cotton pad that women use for facial care and apply a thick layer of ointment-cream to my shoe.

I ran the hairdryer over my shoe one more time so that the beneficial mixture that repels water was more absorbed.

I leave it for 7-8 hours, let our mixture be absorbed. I do not recommend going outside immediately after applying the protective layer. It is necessary to dry the shoes and allow time for the product to be completely absorbed.

I check by dripping water from a glass onto the shoe, and I see droplets of liquid flowing from the shoe.

I usually do the processing in the evening, and in the morning my favorite boots are ready to go out into rainy weather and slush. My feet will be dry unless I intentionally wade through deep puddles.

Waterproof impregnation of shoes and the price in money, how much money I spent on a home remedy for moisture with my own hands:

Flaxseed oil - 2 teaspoons - 15 rubles
Castor oil - 2 teaspoons - 1 ruble
Paraffin candle - 1 teaspoon of crushed candle - 2 rubles

Total - 18 rubles

Castor and linseed oil left over from preparing the impregnation will be useful for health and female beauty. Self-prepared shoe impregnation cost me less than store-bought.

By treating your shoes with a waterproof layer, prepared with your own hands, we will not only keep your feet dry, but also increase their wear resistance. This wonderful folk recipe will not let you down and your feet will be dry.

My conclusion

Time-tested people's councils work and help us in many cases. I talked about one of my methods for making shoes waterproof. Any seasonal footwear and water-repellent treatment applied on a regular basis will help your shoes not get wet in wet weather conditions.

Using the prepared composition at home regularly 2 times a week, I help preserve my boots and boots for a longer period of time for my shoes and the habits of my household.

I will be glad if the article was useful. I will answer questions if any arise.

Good health to you, don't get sick

By treating shoes with a waterproof layer, prepared with our own hands, we will not only keep our feet dry, but also increase their wear resistance. This wonderful folk recipe will not let you down and your feet will be dry.

With the onset of slushy, damp weather, during the rainy season, you want to provide your feet with maximum warmth and dryness. And if in the summer it is enough to properly dry shoes that have been caught in the rain, then in the off-season and winter this is not enough.

Waterproof shoes.

The lucky ones who managed to choose shoes that would not get wet need not read further. For those who are acutely concerned about keeping their shoes from getting wet, here are our tips.

Why do shoes get wet?

There are several reasons why shoes get wet:

peeled, damaged shoe soles.
poor-quality connection of the sole with the shoe or boot (uneven, missing seams, the presence of holes and microcracks).
poor quality product. This includes poor quality material and irregularities in the shoe manufacturing process.
contact of shoes with chemical reagents. Sprinkling the streets with anti-ice chemicals is certainly necessary. However, our shoes and boots suffer from this, become deformed and begin to get wet.
Initially, during the production process, the product was not treated with a special impregnation that makes the shoes waterproof.
artificial leather and synthetic material cannot withstand severe frosts, crack and lose moisture resistance.

Waterproof outsole.

First of all, both when purchasing and when leaking, we pay attention to the sole. The cause of wet feet is often due to poor quality or damaged soles. It is unlikely that you are walking through deep puddles. In order to get your feet wet in shoes with poor-quality or damaged soles, it is not necessary to stand ankle-deep in water for a long time. In most cases, shoes get wet not because of the base material, but because of problems with the sole. So we inspect the sole and take the following measures:

if the sole is poorly glued, then it must either be re-glued or stitched. Since only a few have the talents of shoemakers, you will have to take the problematic product for stitching or gluing to a shoe workshop.
soles with defects in the form of cracks or holes can be treated with drying oil. First, sand the sole a little, then apply drying oil and leave to dry. If you doubt your own abilities, you can install outsoles on the original sole in problem areas. Only this should be entrusted to the master.
Poor quality seams are coated (impregnated) with any water-repellent cream or spray for waterproof shoes. There are folk remedies to put on your shoes to prevent them from getting wet. But more about them below.

In order not to worry about how to treat your shoes in the future, so as not to get wet, when purchasing boots or shoes, pay special attention to checking the quality of the seams and soles.

How to soak shoes so they don't get wet.

You can protect your boots or boots with the help of special means to protect shoes from getting wet. Such creams and sprays are sold in any shoe store. Among the protective agents, the most effective ones should be noted:

Salamander Universal SMS. This spray for shoes, so as not to get wet, is designed for any material (leather, suede, textiles). It not only protects boots from moisture and dirt, but also takes care of the appearance of the product.
Ecco. It is a fast-acting spray because it dries in a matter of seconds. It differs in that when used, shoes become not only waterproof, but also remain breathable.
Salamander. A rich cream designed to prevent leather shoes from getting wet. It has high water-repellent properties, helps restore shine, paints over abrasions, and eliminates roughness. The cream contains natural wax.
Collonil Nanopro. You won’t find a better way than treating nubuck shoes to prevent them from getting wet. It can also be successfully used to create the thinnest, invisible, absolutely impenetrable and deep film on leather boots, velor ankle boots, and textile boots.
Kiwi AquaStop is intended not only for natural materials, but also for artificial leather.
Rough leather boots or shoes can be protected from moisture and salts using Grangers G-Wax impregnation cream.
100% protection is also provided by high-quality Swedish impregnation SMS Olvist. This is an excellent way to treat suede shoes so that they don’t get wet or warp.

How to treat shoes with store-bought protective products to prevent them from getting wet.

Proper application, not just purchase, can protect your shoes from moisture absorption and keep your feet comfortable.

Before applying the protective agent, clean the boots from dirt, wash them and leave until completely dry.
A one-time spray of the spray will not be enough. You need to spray the product until the aerosol stops being absorbed into the material of the boots or shoes.
water-repellent creams are applied three times with a time interval of one day between applications. Only then will the cream begin to work.

When choosing a cream to prevent your winter shoes from getting wet, pay attention to the percentage of fats included in the product. It must be at least 40%.

You should lubricate your shoes to prevent them from getting wet either a couple of hours before going outside. It’s better to carry out this procedure a day before going out.

We remember that we use cream for leather boots, and aerosol for suede, nubuck and textiles.

Waterproof shoes at home.

The point of any water-repellent cream is its high fat and wax content. Since the structure of suede will not tolerate rough interference with fats and wax, so that suede shoes do not get wet, it is better not to wear them in rainy weather. But, if you still have no options, then only aerosols are suitable for this material.
For other materials, there are ways to treat shoes at home so that they don’t get wet.

Before treating your shoes to prevent them from getting wet with home remedies, do a test on a small area of the shoe or boot in the seam area.

And now, in fact, the folk remedies themselves. To protect your boots, we offer products that you have on hand or those that you can easily and without significant expense purchase:

medical Vaseline. It has excellent water repelling properties. You need to lubricate the entire surface of the shoe with Vaseline and go especially carefully along all the joints and seams.
We prepare a composition of lamb fat, linseed oil and turpentine. We take oil and lard in equal proportions, and turpentine - 1/5 of the volume of oil and lard. Lamb lard should be melted first. Mix all ingredients and apply warm mixture to boots. To apply to your shoes, use a lint-free, soft cloth.
A proven homemade water-repellent cream is made from wax (you can replace it with paraffin) and linseed oil in a 3:1 ratio. Before treating shoes with wax, so as not to get wet in the future, the wax should be melted. Add linseed oil to warm wax and rub the mixture into boots/shoes.
if you need to increase the protective properties of a rough leather product, then use castor oil. After rubbing the oil into the leather, be sure to polish your shoes. To enhance the water-repellent properties, you can add any animal fat to castor oil.

The fat of waterfowl has the best water-repellent properties.

An excellent way to make waterproof shoes with your own hands is beeswax. Add turpentine and crushed rosin to beeswax and you have a homemade water-repellent cream. For 20 grams of beeswax you will need 10 grams of regular turpentine and 50 grams of rosin.
Another mixture of components already known to you includes 20 grams of glycerin, 40 grams of liquid fish oil, 30 grams of turpentine and 10 grams of beeswax. To prepare this cream, you need to sequentially mix fish oil, turpentine and beeswax. Melt these components over low heat and only then add glycerin. The cream should be applied to shoes while warm.
and finally, a method that does not require special materials or abilities. Take paraffin (melt a candle that you have in your house, just not a colored one) and melt it. While warm, spread the paraffin over the entire surface of the shoes, carefully treating the seams and butt joints. The layer should be dense. Then turn on the hair dryer and heat the waxed boot or boot. Melting under the influence of temperature, the wax will begin to fill small holes and invisible pores, which are precisely the reason why water gets into the product.

Prepare your shoes for the rainy season in advance. And then your feet will always be dry and comfortable.

In the autumn and winter season, wet shoes become a real disaster. After a walk, your feet always end up wet, your shoes quickly lose their original appearance, and there’s no need to talk about the unpleasant smell from wet boots.

What to do if your boots get wet, and how to prepare your shoes for winter?

Why do shoes get wet in winter, and how to properly prepare them for this time of year?

Everyone knows that wet feet are a reason to come down with a fever and runny nose. Therefore, it is important that shoes remain dry during the snowy or rainy season.

Why do boots get wet in winter?

The sole has come off. Most often, such a “wet matter” is associated precisely with damage to the sole or its poor-quality “adhesion” to the boot itself.
Poorly made shoes. Cheap boots “2 pairs for the price of 1” are always of poor quality. Manufacturers use low-quality materials, and the production process leaves much to be desired. Considering that suede and leather themselves do not allow moisture to pass through, we can confidently talk about poor-quality seams or the presence of holes and cracks.
Chemical reagents. They are used to sprinkle roads in the winter, and it’s no secret that such products can “kill” even the strongest boots in one winter.
No special impregnation on shoes (note – the task of the manufacturer).
Synthetic materials. Frost causes artificial leather and other synthetic materials to crack, as a result of which shoes also lose their “moisture resistance.”

So that when winter begins you don’t have to urgently shell out for a second pair of shoes, buy it in advance.

Prepare your first pair for winter with the help of simple tips and specialists from a shoe workshop:

We evaluate the integrity of the sole, seams, leather and accessories.
We wash and clean the surface.
We change heels (if necessary) and strengthen the heels.
We sew (strengthen) the seams.
Reinforce (if necessary) the sole. This preventive measure will help compact the sole, protect it from rapid abrasion and provide anti-slip properties. It is important to ensure that the master uses only high-quality material that will be resistant to reagents and frost. For example, wear-resistant rubber or polyurethane. Such a budget option as resit (note – and microporous rubber) should be abandoned.

You can also...

Impregnate poor-quality seams with a special agent with water-repellent properties. True, this manipulation will have to be repeated periodically.
Dry the cracks and holes (note - sand the surface, and then apply drying oil and wait for it to dry).
Install outsoles (rolling) on top of your sole if you do not want to change it completely.
Buy fat-containing (nutrient) products for leather shoes. They will restore elasticity to the boots and prevent cracking.
Buy creams/aerosols based on beeswax for patent leather shoes.
Find special products for shoes with breathable membranes. Such products will enhance the water-repellent effect and support pore breathing.

7 best folk recipes that will make shoes waterproof at home!

It’s not only in winter that you have to think about water-repellent agents for shoes. They won’t interfere with summer shoes either (who likes squishy shoes).

For your attention - folk and store-bought remedies for protecting shoes from moisture.

Strengthening the water-repellent properties of leather shoes: 7 best “folk” recipes

Lamb lard (about 50 g) + flax oil (about 50 g) + regular turpentine (10 g). Mix the ingredients, having previously melted the lard, and apply the still warm mixture to the boots using a soft cloth.
Wax + flax oil. Melt 30 g of wax (you can use paraffin) over low heat and mix with pre-purchased linseed oil (10 g is enough). Apply the warm mixture to the boots and gently rub in with a woolen cloth.
Castor oil. As a rule, every girl has it. But it is recommended to use it exclusively for rough skin (note: it will ruin thin skin). Simply rub the oil into the leather surface and polish.
Beeswax (about 20 g) + regular turpentine (about 10-15 g) + crushed rosin (no more than 50 g). Mix all ingredients and apply to boots with a soft cloth. Wait for absorption.
Glycerin (about 20 g) + liquid fish oil (40 g) + turpentine (about 30 g) + beeswax (about 10 g). Mix everything, melt over low heat and mix with glycerin. Next, apply the mixture to the shoes.
Castor oil + any animal fat. We take these components in equal proportions, after melting the fat. Next, mix them and apply the mixture to the shoes and their seams.
Wax or paraffin. Rub the boots with a candle until the surface is completely covered. Next, we heat this wax coating evenly using a hairdryer. An ingenious recipe that reliably saves shoes from getting wet.

Important!

You cannot use paraffin, wax and organic creams for suede shoes - they require a more subtle approach.

For suede, suitable aerosols and emulsions are widely available in stores.

7 best store-bought products for protecting boots from getting wet

Salamander Universal SMS. This spray is suitable for leather, textiles and suede. Reliably protects shoes from dirt and moisture, and also improves their appearance. The disadvantage is the strong smell (it is better to use the spray outside or on the balcony). The average price is about 350 rubles.
Ecco. A unique effective spray that protects against moisture and dirt and does not disturb the air exchange of the material. It dries instantly and is economical to use. The average price is about 500 rubles.
Collonil Nanopro. A revolutionary spray based on fluorocarbonate compounds is a real find for leather, textiles, nubuck, velor, etc. Creates the thinnest and most invisible, absolutely impenetrable and deep film on shoes. One of the advantages is high efficiency. The disadvantage is the price. The spray will cost an average of 600-800 rubles.
KiwiAquaStop. This spray is suitable for leather and nubuck, as well as suede, textiles and artificial leather. Reliably protects shoes (dirt, moisture and reagents), dries quickly, restores appearance, and easily fits in a bag. Costs about 200 rubles.
Salamander cream. Fat nourishing skin cream. Powerful water-repellent properties, restore shine, cover up abrasions, cost-effective, natural wax in the composition, no pungent chemical odor. The average price is about 160 rubles.
Grangers G-Wax. A very effective impregnation cream for rough skin. Purpose – cleaning and protection from moisture and salt. Created on the basis of beeswax. The average price is about 350 rubles.
SMS Olvist. High-quality Swedish impregnation for 100% protection against moisture and dirt. Designed for textile leather. Fully approved by customers. The average cost is about 300 rubles.

Of course, just buying the perfect product for your shoes is not enough.

It is also important to apply it correctly!

Method of 3rd application of impregnation. We apply the product to shoes three times with an interval between procedures of 1 day. Only after such a procedure can you be sure of the reliability of your shoes.
Using a spray, we spray it with more than one spray , and until the product stops being absorbed into the structure of the shoe.
When using impregnation on old shoes, be sure to thoroughly clean the surface first. shoes, then wash and dry thoroughly. And only then can you apply the product.
Choosing the right product! For example, oily water-repellent creams are only suitable for rough leather, while for other materials it is better to use sprays and emulsions. It is also worth noting that leatherette is not able to absorb oils and sprays.

Video recipes for all occasions, how to make shoes waterproof

Video: The secret to protecting shoes from moisture!

Video: How to extend the life of leather shoes to 20-30 years

Important!

If you bought expensive shoes for the winter, and they got wet in the first week of winter, you have every right contact the seller and request a refund or an equivalent exchange.

If the seller refuses, according to the law, you can insist on an independent examination procedure and sue, demanding reimbursement of all your costs, the amount spent on shoes, as well as payment for moral damages.

The site site thanks you for your attention to the article! We will be very pleased if you share your recipes for making boots or shoes waterproof!

The water-repellent properties of leather shoes are lost after several weeks of wear. And with the onset of slushy weather, this can cause colds, since the feet need dryness and warmth. Therefore, you need to know how to treat your shoes so they don’t get wet, and how to make them waterproof even in the wettest weather.

For this, there are many factory and folk remedies that cope with this task very effectively.

Why do shoes get wet?

Shoes can leak for the following reasons:

Sole defects and repairs

Many people are interested in the question of what to do if their shoes get wet. When shoes leak, you first need to check the sole, since often the cause of wet feet is associated with its damage or poor quality. If the sole has defects or is of poor quality, then in wet weather it is better not to risk your health by wearing such shoes for a walk. It is necessary to carefully inspect it, identify defects and take the following measures:

In order not to be tormented in the future by the question of how to protect your shoes from getting wet, carefully check the quality of the soles and seams when purchasing.

Suede and leather care

Low-quality leather allows moisture to pass through quite quickly, so figure out how to soak your shoes from getting wet so that they don’t wear out and your feet are dry.

Leather

Shoe care can be carried out using special water-repellent compounds for any materials. There are plenty of these funds on the market, and it will be easiest to use them. For leather, impregnation in the form of a spray, special cream or wax is suitable. It should be borne in mind that emulsion cream will not protect against moisture, so you need to choose an organic product with a high content of oils, waxes and fat.

You can use folk remedies that will protect your leather shoes from getting wet.

Instead of cream, castor oil is used to treat skin and seams.

You can also prepare special mixtures:

Recipe No. 1

Turpentine - ½ tbsp. l.

Fish oil - 4 tsp.

Flaxseed oil - 4 tsp.

Recipe No. 2

Wax or paraffin - 1 tsp.

Flaxseed oil - 1 tsp. or animal fat and castor oil (1:1).

Flaxseed oil can be replaced with rendered animal (goose) fat. It is believed that waterfowl have the most suitable composition of fat deposits.

Suede and nubuck

Cream and wax are not suitable for suede. To protect this material from moisture, you need to use special impregnations in the form of a spray, which are made on the basis of waterproof emulsions.

Regardless of the type of material and processing method, impregnation can only be done on dry and clean shoes 6 hours before going outside. If necessary, the procedure must be repeated regularly, since the water-repellent effect of the spray and wax is not endless.

To ensure that your shoes are worn for a long time and do not get wet, impregnate new shoes with a protective substance. To do this, lubricate and treat them with a suitable product several times at daily intervals. If the product no longer actively absorbs cream, oil or spray, it means it has become saturated. After a little drying, you can safely go about your business.

Other materials

Store-bought water-repellent products are not suitable for leatherettes and fabrics, since artificial leather does not absorb fat, and it is simply stupid to treat light textile shoes with oil or cream. Although leatherette shoes can still be saved.

If leatherette shoes allow water to pass through, it means the sole is damaged or poorly sewn. You already know what to do in these cases: repair it yourself or take it to a workshop, and after repair you can wear it without risk to your health.

How to treat shoes so they don't get wet

Protecting your shoes from water with special means will extend the life of your boots. Such sprays and creams can be purchased at a shoe store. The most effective of them are I:

Proper treatment of shoes with protective agents

To ensure maximum protection of shoes from getting wet, you need to apply the appropriate product correctly. . To do this you need:

When choosing a cream for winter shoes, pay attention to the amount of fat contained in the product - it should be at least 40 percent.

It is advisable to lubricate shoes a day before using them.

For leather boots, sneakers and combat boots, creams should be used. Textiles, nubuck and suede are treated with aerosols.

How to make shoes waterproof at home

Water-repellent (hydrophobic) properties Any protective cream is supported by a high content of wax and fat. And it’s not difficult to purchase such products cheaply or prepare them at home. There are some effective and simple recipes that will help protect your shoes from getting wet.

Treat leather shoes and boots with Vaseline. To do this, you need to lubricate the entire surface of the shoe with this product, and especially carefully saturate all the joints and seams.

You can prepare the following composition:

Rendered lamb lard and flaxseed oil - equal proportions.
Turpentine - 1/5 of the volume of lard and oil.

All components are mixed and the warm mixture is applied to the boots using a flannelette rag.

Use an effective water-repellent cream that you can prepare at home. To do this, you need to take wax (can be replaced with paraffin) and linseed oil in a ratio of three to one, respectively. The wax should be melted, linseed oil should be added to it, and the resulting mixture should be rubbed into shoes or boots.

To enhance protective properties For rough skin, you can use castor oil. After the procedure of rubbing into leather material, the shoes must be polished. To increase the water resistance of the product, animal fat can be added.

Beeswax is an excellent way to protect boots from getting wet. If you add crushed rosin and turpentine to it, you will get an effective water-repellent cream, which in its protective properties is not much different from its factory-made counterparts. To prepare this product you will need:

Beeswax - 20 gr.
Turpentine - 10 gr.
Rosin - 50 gr.

Another good recipe from ingredients you already know:

Turpentine - 30 gr.
Beeswax - 10 gr.
Liquid fish oil - 40 gr.
Glycerin - 20 gr.

To prepare this shoe polish, you need to successively mix turpentine, beeswax and fish oil. Melt the mixture over low heat and then add glycerin. Warm cream is applied to leather shoes.

The following method is quite simple and does not require special abilities or available materials. Take a white candle and melt it. Distribute warm paraffin in a dense layer over the entire surface of the boots or shoes, carefully treating butt joints and seams.

Then turn on the hair dryer and heat the waxed shoes. Wax under the influence of temperature will begin to melt and fill invisible pores and small holes, which are the reason for water getting into the product.

Preventive measures

To avoid having to urgently resolve the issue of how to protect your shoes from getting wet, you should take the necessary preventive measures immediately after purchase. In stores you can now find a lot of different special products that differ in composition:

But before using this or that product, you need to know the features of applying a cream or spray:

If you stick to these professional recommendations, and also use traditional home methods, your feet will always be dry and warm, despite the vagaries of the weather.

Attention, TODAY only!

In wet and cold weather, in mud and slush, we may encounter a problem when our shoes get wet. Because of this, the condition of the material deteriorates, it becomes deformed and loses color. In addition, wet shoes can lead to a person catching a cold and getting sick. This problem can be corrected using professional and folk remedies. In this article we will look at how to make shoes waterproof at home.

There may be several reasons for this process. First of all, these are peeled or damaged soles and poor quality of products, uneven and missing seams, holes and microcracks in products. And during use, boots, boots or shoes wear out, crack, and lose moisture resistance.

To avoid these problems, experts recommend choosing only high-quality and durable shoes made from natural materials. Such products do not get wet and have a long service life. Synthetic materials, including artificial leather and suede, quickly deform and crack, get wet easily, lose their original color and shine, and presentable appearance.

If holes and cracks have formed on the sole, it is best to treat the defects with drying oil, pre-treat the area with sandpaper and degrease with gasoline or acetone. If the sole is poorly glued, we re-glue or glue the part, in this case we take the shoes to a shoe workshop.

In addition, shoes are negatively affected by chemicals that are used to de-ice roads in winter. Such products deform the products, and they begin to let moisture through. To protect your shoes, treat a new pair with special water-repellent agents before the first wear.

During operation, impregnating shoe creams, sprays and other compounds are used for products. Select the appropriate preparations depending on the type of material and color of boots, boots or shoes. In addition to professional ones, you can also use folk remedies. Let's find out in more detail what to do to prevent your shoes from getting wet.

Treatment with protective water-repellent impregnation

You can make shoes waterproof using a special protective impregnation, which forms a transparent film on the surface of the shoe, preventing liquid from being absorbed. The moisture simply flows down without affecting the products.

When choosing a product, pay attention to the amount of fat that is included in the drug. It must be at least 40%. At the same time, choose creams for leather, and spray or aerosol for suede, nubuck or textiles. We offer a list of the most effective means:

Salamander Universal SMS universal protective products are suitable for every type of material, including leather, suede and textiles. They protect the surface and maintain the presentable appearance of the shoes;
Kiwi AquaStop is another universal product that is suitable for both natural and artificial materials. It is more accessible;
Salamander is suitable for treating leather products. The cream is characterized by a fatty composition with high water-repellent properties and the content of natural wax. It not only prevents the material from getting wet, but also restores shine, covers up abrasions and scratches, eliminates roughness, and provides reliable care for leather shoes;
Esso fast-acting spray dries in a few seconds. It makes products waterproof, while maintaining the breathable properties of natural materials;
Collonil Nanopro is the best product to treat nubuck and suede shoes, boots or textile or velor boots. It creates the thinnest and most invisible, deep and impenetrable film. Ensures proper care of materials and prevents getting wet;
For rough skin, choose Grangers G-Wax salts and impregnations;
SMS Olvist is a Swedish drug that creates maximum moisture protection for a suede pair. As a result, suede does not get wet, does not warp or deform. How to properly care for suede shoes, see here.

For the desired effect, it is important to properly saturate the shoes. Before applying impregnation, the product must be thoroughly cleaned of dirt and dust, rinsed and dried. Do not handle dirty, dusty or wet shoes! The product should be applied until it is absorbed into the material. A light spray is not enough!

After treatment, dry the products for nine to ten hours. To achieve maximum reliable protection, use the triple impregnation method. To do this, treat the surface with the product three times at intervals of 24 hours.

If you do not want to use store-bought drugs, you can choose traditional methods. But keep in mind that artificial materials are not susceptible to oils and drying oils. And for suede and nubuck shoes you cannot use paraffin, wax and organic compounds!

Folk remedies for treating shoes

Take 50 grams of linseed oil and lard, ten grams of turpentine. Melt the lard and mix the ingredients. Apply the resulting composition while warm to the surface of the shoes using a soft cloth;
Melt 30 grams of wax over low heat and mix with linseed oil in a volume of ten grams. Apply the warm mixture to the material and rub gently with a woolen cloth;
For rough skin, you can use castor oil. It will create a protective water-repellent film and preserve the shine of the shoes. But it is not suitable for delicate materials and thin leather, as it can damage the products. To process, you need to rub the oil into the surface and polish the shoes;
Castor oil can be mixed with animal fat in equal quantities, after melting the fat. Mix the components and apply the resulting mixture to the surface and seams of the boots;
Mix 20 grams of beeswax, ten grams of turpentine and 50 grams of crushed rosin. Apply the composition to shoes or boots and leave until completely absorbed;
Take 30 grams of turpentine, 40 grams of liquid fish oil and ten grams of beeswax. Mix the ingredients, melt over low heat and add 20 grams of glycerin. Mix and apply the resulting composition to the shoes;
We rub wax or paraffin into the surface of shoes or boots. Heat the coating evenly with a hairdryer. This is a quick and easy way that will reliably protect leather shoes from getting wet.

If your shoes are wet

If you do get your shoes wet, you need to dry them thoroughly. At the same time, you should not place suede or leather products on the radiator or near heating devices. They shorten the life of products, which then crack and become deformed.

Shoes should be dried at room temperature under natural conditions. After complete drying, the shoes are treated with cream or spray.

Insoles from wet shoes are removed and dried separately. It is better to have at least two pairs of boots, boots and shoes for each season, so that wet shoes have time to completely dry and soak.

To speed up the drying process, place crumpled newspapers without illustrations or photographs or light paper inside each shoe or boot. When newspapers become wet, replace them with dry ones. For more information on how to properly dry shoes, see the link https://vsepodomu.ru/garderob/kak-bystro-vysushit-obuv/.

DIY water-repellent impregnation for shoes

What to do if your boots get wet, and how to prepare your shoes for winter?

Why do shoes get wet in winter, and how to properly prepare them for this time of year?

Everyone knows that wet feet are a reason to come down with a fever and runny nose. Therefore, it is important that shoes remain dry during the snowy or rainy season.

Why do boots get wet in winter?

The sole has come off. Most often, such a “wet matter” is associated precisely with damage to the sole or its poor-quality “adhesion” to the boot itself.
Poorly made shoes. Cheap boots “2 pairs for the price of 1” are always of poor quality. Manufacturers use low-quality materials, and the production process leaves much to be desired. Considering that suede and leather themselves do not allow moisture to pass through, we can confidently talk about poor-quality seams or the presence of holes and cracks.
Chemical reagents. They are used to sprinkle roads in the winter, and it’s no secret that such products can “kill” even the strongest boots in one winter.
No special impregnation on shoes (note – the task of the manufacturer).
Synthetic materials. Frost causes artificial leather and other synthetic materials to crack, as a result of which shoes also lose their “moisture resistance.”

So that when winter begins you don’t have to urgently shell out for a second pair of shoes, buy it in advance.

Prepare your first pair for winter with the help of simple tips and specialists from a shoe workshop:

We evaluate the integrity of the sole, seams, leather and accessories.
We wash and clean the surface.
We change heels (if necessary) and strengthen the heels.
We sew (strengthen) the seams.
Reinforce (if necessary) the sole. This preventive measure will help compact the sole, protect it from rapid abrasion and provide anti-slip properties. It is important to ensure that the master uses only high-quality material that will be resistant to reagents and frost. For example, wear-resistant rubber or polyurethane. Such a budget option as resit (note – and microporous rubber) should be abandoned.

You can also...

Impregnate poor-quality seams with a special agent with water-repellent properties. True, this manipulation will have to be repeated periodically.
Dry the cracks and holes (note - sand the surface, and then apply drying oil and wait for it to dry).
Install outsoles (rolling) on top of your sole if you do not want to change it completely.
Buy fat-containing (nutrient) products for leather shoes. They will restore elasticity to the boots and prevent cracking.
Buy creams/aerosols based on beeswax for patent leather shoes.
Find special products for shoes with breathable membranes. Such products will enhance the water-repellent effect and support pore breathing.

7 best folk recipes that will make shoes waterproof at home!

It’s not only in winter that you have to think about water-repellent agents for shoes. They won’t interfere with summer shoes either (who likes squishy shoes).

For your attention - folk and store-bought remedies for protecting shoes from moisture.

Strengthening the water-repellent properties of leather shoes: 7 best “folk” recipes

Lamb lard (about 50 g) + flax oil (about 50 g) + regular turpentine (10 g). Mix the ingredients, having previously melted the lard, and apply the still warm mixture to the boots using a soft cloth.
Wax + flax oil. Melt 30 g of wax (you can use paraffin) over low heat and mix with pre-purchased linseed oil (10 g is enough). Apply the warm mixture to the boots and gently rub in with a woolen cloth.
Castor oil. As a rule, every girl has it. But it is recommended to use it exclusively for rough skin (note: it will ruin thin skin). Simply rub the oil into the leather surface and polish.
Glycerin (about 20 g) + liquid fish oil (40 g) + turpentine (about 30 g) + beeswax (about 10 g). Mix everything, melt over low heat and mix with glycerin. Next, apply the mixture to the shoes.
Castor oil + any animal fat. We take these components in equal proportions, after melting the fat. Next, mix them and apply the mixture to the shoes and their seams.
Wax or paraffin. Rub the boots with a candle until the surface is completely covered. Next, we heat this wax coating evenly using a hairdryer. An ingenious recipe that reliably saves shoes from getting wet.

Important!

You cannot use paraffin, wax and organic creams for suede shoes - they require a more subtle approach.

For suede, store-bought shoe products such as aerosols and emulsions, widely available in stores, are suitable.

7 best store-bought products for protecting boots from getting wet

Salamander Universal SMS. This spray is suitable for leather, textiles and suede. Reliably protects shoes from dirt and moisture, and also improves their appearance. The disadvantage is the strong smell (it is better to use the spray outside or on the balcony). The average price is about 350 rubles.
Ecco. A unique effective spray that protects against moisture and dirt and does not disturb the air exchange of the material. It dries instantly and is economical to use. The average price is about 500 rubles.
KiwiAquaStop. This spray is suitable for leather and nubuck, as well as suede, textiles and artificial leather. Reliably protects shoes (dirt, moisture and reagents), dries quickly, restores appearance, and easily fits in a bag. Costs about 200 rubles.
Salamander cream. Fat nourishing skin cream. Powerful water-repellent properties, restore shine, cover up abrasions, cost-effective, natural wax in the composition, no pungent chemical odor. The average price is about 160 rubles.
Grangers G-Wax. A very effective impregnation cream for rough skin. Purpose – cleaning and protection from moisture and salt. Created on the basis of beeswax. The average price is about 350 rubles.
SMS Olvist. High-quality Swedish impregnation for 100% protection against moisture and dirt. Designed for textile leather. Fully approved by customers. The average cost is about 300 rubles.

Of course, just buying the perfect product for your shoes is not enough.

It is also important to apply it correctly!

Method of 3rd application of impregnation. We apply the product to shoes three times with an interval between procedures of 1 day. Only after such a procedure can you be sure of the reliability of your shoes.
Using a spray, we spray it with more than one spray , and until the product stops being absorbed into the structure of the shoe.
When using impregnation on old shoes, be sure to thoroughly clean the surface first. shoes, then wash and dry thoroughly. And only then can you apply the product.
Choosing the right product! For example, oily water-repellent creams are only suitable for rough leather, while for other materials it is better to use sprays and emulsions. It is also worth noting that leatherette is not able to absorb oils and sprays.

Video recipes for all occasions, how to make shoes waterproof

Video: The secret to protecting shoes from moisture!

Video: How to extend the life of leather shoes to 20-30 years

Important!

If you bought expensive shoes for the winter, and they got wet in the first week of winter, you have every right contact the seller and request a refund or an equivalent exchange.