How to sew a skirt to the floor from satin. Feminine skirt to the floor: ideas and patterns. How to save money

Sewing a simple skirt to the floor will not be difficult even for a novice craftswoman. After all, you can do without a pattern, it will be enough to make just a few measurements. In this article, we will analyze in detail what and how to measure, how to cut out details and sew. For those who do not want to bother with building a drawing, I offer ready-made free patterns of a long skirt, which can be downloaded at the end of the article.

How to build a skirt pattern to the floor

First we need to decide on the fabric. It is desirable that it be stretched in the transverse direction. Otherwise, the skirt will hinder movement.

Required measurements:

• Waist,
• Hip circumference (optional measurement, needed for verification),
• Length from waist to outside of foot.
• Step length (needed so that the skirt does not hinder movement).

With the first three measurements, I think there should be no questions. But in order to measure the length of the step, or rather it would even be to say the circumference, you need to take your usual step and measure the circumference with a centimeter tape, clasping the ankles.

On a fabric folded in half, set aside a quarter of the OT on top, for example, if your waist is 68 cm, then you will need to set aside 17 cm + a seam allowance.

Set aside the length along the fold line, for example 90 cm. From the point obtained, lay off a quarter of the step circle to the side. So, if your measurement of this value was 88 cm, then you will need to postpone at least 22 cm. Of course, you can measure more, but if you take a smaller segment, keep in mind that walking in a skirt will not be very convenient. To remedy the situation, you will have to make an incision, but we sew without it.

Finally, check if the skirt is tight at the hips. To do this, measure about 18-20 cm below the waist and measure the width in this area, it should be at least a quarter of the circumference of your hips. If you have a narrow waist and very wide hips, you will have to slightly increase the waist mark, and increase the width of the lower segment by the same amount.

Method number 2. According to the method of Marlene Mukay.

Marlene Mukay suggests building a long skirt pattern based on the circumference of the hips. Below are drawings of such skirts. We see that a rectangle is initially drawn, the width of which is a quarter of the OB. We measure a quarter of OT from above, and another quarter of OB is deposited along the bottom from the edge of the rectangle. The edges of the skirt need to be slightly rounded. In my opinion, Marlene Mukai's patterns are one of the most accurate and at the same time simple. By the way, all measurements in the drawings are indicated taking into account allowances. Size chart below.

How to sew a maxi skirt

Cut out the pattern pieces. Lay them right sides together and sew the side seams. Perform a bottom hem.

To process the top, cut a strip of fabric, the length of which will be equal to OT, the width is about 20 cm. Fold it in half and sew it to the top cut of the skirt. If you have very wide hips, and the fabric is not elastic, then you can cut a longer strip, and then insert an elastic band into it or stitch rubber veins.

Other maxi skirt options

Here are some more options for long skirts. The size chart for these drawings is the same as for Marlene Mukay's patterns.

From season to season, floor-length skirts do not lose their popularity. And this is not surprising. This model looks romantic and feminine. It gives the image a special charm and mystery. In addition, floor-length skirts are practical and comfortable. We can say with confidence that this is a universal element of the wardrobe, since floor-length skirts are suitable for women of different ages and builds. You can wear such clothes for going to the theater, and to the office, and for a walk in the park.

Modern fashion designers and designers do not get tired of experimenting with textures, decor and styles, creating more and more new variations on the “floor skirt” theme. To sew this thing, it is not at all necessary to be a couturier or a cutter with many years of experience. Even an inexperienced needlewoman can sew a skirt to the floor with her own hands.

The famous Tatyanka skirt

Skirts to the floor, gathered at the waist, do not go out of sight of fashionistas. Their variations are still relevant and loved by admirers of different styles in clothing.

iSperky.sk

Progress

1. Add 50 cm to the hip circumference. This is the width of the product.
2. The length should be determined based on your own height. To the expected value, you need to add 15 cm for the seams.
3. If you plan to sew a skirt with a cut-off belt, it must be cut separately. Cut a strip of the required length and width, remembering to add 5 cm to the waist circumference and a few centimeters to the width for the seams.
4. This part must be folded into a ring, stitched in the longitudinal direction, leaving unsewn sides. Pass an elastic band of the appropriate thickness and length through one of these holes.
5. Fold in half the material prepared for sewing a skirt. Sewing the edges, get a pipe. If you use not one length of fabric, but 2 separate parts, then there will also be 2 side seams.
6. Collect the top of the product. The easiest way is to thread the fabric of the upper part up to your waist + 5 cm. Please note: the fabric will fall softer if small gatherings are replaced with several folds.
7. Gently pulling the top of the product, sew on a belt with an elastic band sewn into it.
8. Process the bottom. Fold 2-3 cm of fabric inward, sweep and pass through the machine stitch.

Floor-length six-piece skirt

Such a skirt allows you to favorably emphasize the waist line, visually stretch the silhouette and make it more elegant. It is appropriate to put on a six-piece shirt both for an informal meeting and for work in the office - the main thing is to choose the right fabric and color scheme.

semyablog.ru

How to sew a skirt to the floor

1. Using a measuring tape, take the necessary measurements: waist, hips and length of the product.
2. Add 2 cm to the waist (for freedom of fitting) and divide the sum by 6. The resulting value is the width of one wedge at the waist.
3. Similarly, get the width of the wedge along the hips, only you need to add not 2 cm, but 4 cm to the girth of the hips.

Building a pattern

1. Draw a rectangle ABCD on a large sheet of paper, where AB is the width of the wedge along the hips, AD is the length of the product. Divide the resulting figure into 2 equal parts with a line.
2. From a point in the middle of AB, retreat from 16 to 20 cm. This indicator depends on the expected splendor: 16-18 cm - lush, 20 cm - freely falling. By connecting both points (on one and the other side), you will get the line of the hips (LB). At the top of the rectangle, indent around the edges and mark the LT (use the width of the wedge at the waist).
3. Connecting LT and LB, extend the line to the lower side of the ABCD figure. Indent from corner C - 1 cm up. Connect the resulting point smoothly to the center of the wedge. Do the same with angle D.
4. Lay out the finished pattern on the cut. It is important to consider the texture and color of the material. Leave allowances for the seams: 1-1.5 cm - on the top, 1.5-2 - on the side, 2.5-3 cm - for processing the bottom.
5. Carefully sweep all the details, sew and process the seams. Fold the top and bottom inward and stitch.

Chiffon floor-length skirt - nothing could be easier

These skirts, floating and weightless, are the best solution for hot weather. In a beautiful chiffon skirt, you will feel very comfortable and look just amazing.

femaline.com

Even a novice seamstress can handle sewing a chiffon skirt to the floor - just follow a simple algorithm.

1. Prepare everything you need for work: a piece of fabric 2x1.5 m, matching threads, an elastic band for the belt (width is up to you). The length of the petticoat may not match the length of the skirt and be much shorter (but preferably not less than 30 cm). When buying fabric, do not forget to take into account the cost of the petticoat.
2. Fold the cut in half. Stitch the edges and carefully work the seams. In the same way, work out the product from above and below.
3. Set aside the waist circumference + a few centimeters on the seams, sweep and stitch the edges. Connect to the main part of the product using zigzag seams.

Benefits of long skirts

A floor-length skirt can be narrow or wide, with ruffles or flounces, with slits or original cutouts. Different widths and types of belts, pockets, decorative elements - floor-length skirts are truly diverse.

A warm woolen model will keep you warm in cold weather, and a chiffon model will be a real salvation in the heat. A large number of models are at your disposal: “tatyanka”, six-piece, skirt-year, sun, half-sun. Find what you like and suits you, feel free to experiment with colors and textures, use interesting combinations and express yourself in clothes the way you have long wanted.

It is not the first season that a long skirt has been in the center of attention of fashion designers. No wonder, because this piece of clothing gives the image an incredible femininity and mystery. Thinking about how to sew a long skirt? Believe me, there is nothing difficult in this. Let's look at a few tailoring options.

Choosing a material

Before you sew a long skirt, decide on the material. To create a summer skirt, buy a piece of chiffon, thin cotton, viscose or silk. For a model designed for the off-season, thin wool or tight knitwear is preferable. The fabric should drape well, lie down in soft folds.

How to sew a long skirt with an elastic band quickly and easily

This is one of the easiest ways. It is necessary to take such measurements: waist circumference and length of the future product. Next, we build a pattern on paper, as shown in Figure 1. A \u003d first measurement + 3 cm, B \u003d A + 22 cm, C \u003d second measurement + 5 cm for allowances. Fold the fabric in half inside out. Place the pattern diagonally and cut it out (Figure 2). Now connect the side seams, sew the belt into the hem. It remains to process the hem and insert the elastic. It turned out a comfortable skirt with a small flare. If you want to make it more romantic, you can cut and sew a frill along the hem.

How to sew a long tiered skirt

This model looks especially advantageous on slender tall girls. Sewing it is not difficult, but you will need two types of fabric: light (cotton, chiffon) for tiers and knitted for the base. Take the following measurements: half waist, half hips, length of the product. First you need to prepare the base. Draw a rectangle, the length of which is equal to the length of the skirt, and the width of the half-girth of the hips. Then make the waist area a little narrower so that the product sits well on the figure. And slightly expand the bottom of the skirt from the knee to make it comfortable to walk. Process the side and bottom seams, insert an elastic band into the waistband. We do the tiers like this: we cut out strips of the desired width, we process one edge on an overlock. We sew the second edge, tighten the thread to make folds. We sew the finished tiers onto the base. They need to be slightly overlapped so that the base is not visible. Another variation of this model is when the tiers are sewn on both sides, the thread is pulled together and the tiers are sewn together. In this case, the basis can not be done.

How to sew a long skirt with slits in front

This model opens legs and looks very sexy. It must be sewn from a thin flowing fabric, for example, chiffon. We also need a wide elastic band for the belt. We measure the semicircumference of the waist, hips and the length of the future product. We lay out the material in one layer with the wrong side, we build two rectangles (front and back). The length of the front is equal to the length of the skirt, the width is the half-girth of the hips. The length of the back is also equal to the length of the product, and the width is two half-circumferences of the hips. First, we sew, slightly gathering, a small rectangle to the belt. On the elastic we find the center and sew a large rectangle. This should be done so that it slightly covers the front of the sides. Places where two rectangles overlap each other need to be sewn up. We process the free edges of all parts.

Now you know how to sew a long summer skirt. It should be worn with loose tops, a denim jacket and flat shoes. Create your own unique skirt and be in trend this summer!

Wrap skirt from the site "Everything is in our hands" (link after the article). Below is the author's text.

Such a slice with two tiers sewn on.

Its width is slightly less than two waist volumes, the height of the lobule and two tiers is equal, the assembly coefficient is approximately equal to two.

The fabric should be thin, I have cambric.

Since I will not wear it as a dress and always wrap it on the same side, next time I will sew the upper part half as a slice, half straight. To keep the legs covered.

In the meantime, when plowing, the eggs are partially visible. But you can flaunt the petticoat.

In general, I like the skirt, it’s not difficult to sew it, though you need a lot of fabric, almost 5 meters with a width of 150 cm (but this is 52 sizes). The main thing is that you do not need to build a pattern, only the upper part can be drawn on paper.

Once upon a time, skirts with an assembly at the waist were already in fashion and were called "Tatyanka". The difference between a modern fashionable skirt in length and fabric: the length is almost to the floor, the fabrics are soft, well draped.

For sewing such a very simple skirt, chiffons, thin silks and knitwear, thin, creased (crumpled) cotton fabrics are suitable, pleated fabrics look very good in this model.

Our skirt is made of knitted fabric with a slight addition of elastane.

1. For this skirt, we need only three measurements, waist, hips and skirt length (ready-made).

For hips 100-105 cm, one skirt length + allowances is enough for a fabric width of 150 cm.

For wider hips, count so. Hips + 1/3.

For example: hips - 120 cm

80+OB(120)=200cm

2. Equalize the cuts and the edge on the double folded fabric and edge right on it.

We measure the width of the hem on the elastic band about 7.5-8 cm.

Then the skirt length + 2 cm allowance. I have a meter, but it can be smaller for a height of 170, on average 95 cm. But everything is individual.

We cut off.

If you have two lengths of the skirt, then cut off exactly the same length of the second piece of fabric.

We sew the seams with an overlock.

On the reverse side of the fabric from the face, we also measure the width of the hem for the elastic (it’s more convenient to tuck it immediately on the typewriter).

We make a cut on the loop, for the entrance of the elastic band and overcast it.

On the sewing machine, we process the lower edge of the skirt and the upper one under the elastic.

If not, then after overcasting the sections, we sew them on the usual one according to the basting (the bottom of the skirt is 2 cm, the upper edge along the elastic is 7.5-8 cm)

We iron the cuts. We insert an elastic band 1/3 less than the waist circumference. And wear it with pleasure!

Sincerely, Margaret.

The style of this skirt is known to everyone and loved for a hundred years, but for beginner dressmakers, a scheme for calculating the width of parts will be useful. Sewing this skirt is a breeze, the only tedious thing is distributing the assembly. To make it easier for yourself, make notches at the control points on all the parts, then chop off the parts by aligning these points. It is much more convenient to distribute the assembly in small segments. By the way, whoever doesn’t like gathering at the waist can change the upper tier and take it from a pencil skirt pattern with darts and a zipper in the seam, and do the rest according to the scheme. And don't forget to add extra seams! (S.Z.)

You can never have too many skirts! And not a single woman will deny herself the pleasure of sewing another magnificent skirt according to the patterns proposed in this section. And there are several reasons for this. Firstly, to even sew the most complex skirt, just a couple of days is enough, and simple models of skirts, for example, a sun skirt or a Tatyanka-type skirt, can be sewn in a couple of hours.

Secondly, in order to sew a skirt, a small amount of fabric is enough. And sometimes craftswomen can create real masterpieces even from cuts of fabrics stale in their chests.

And the third reason why most craftswomen love to sew skirts is the incredible amount of creative ideas and ready-made skirt patterns on our website. You can use the developed patterns as they are, or you can add your own ideas to the product, add the details you want. Creativity is in your hands!

If you are new to sewing and don't know where to start, we recommend that you first create a basic skirt pattern according to your own measurements. You will be surprised how easy this can be done by following our instructions. Each ready-made skirt pattern contains a link to the base pattern, and you can use it.

If you are limited in time and for some reason cannot build a basic skirt pattern yourself, we also made sure that you can download it for free. The pattern for download is presented on the site in 5 standard sizes.

It is important to note that for sewing some types of skirts, a basic pattern is not required: for example, for a bell skirt, sun skirt, “semi-sun”, “Tatyanka”, for a skirt with frills and many other styles of fluffy skirts, it is enough to take only 2-3 measurements .

Each model contains not only information on modeling and cutting, but also detailed instructions for sewing each model. In addition, we have prepared for you master classes of those sewing operations that are often performed when sewing skirts - for processing darts, belts, belt loops, pockets, fasteners, folds, gathers and much more.

Choose your favorite models of skirts, cut and sew together with the Sewing School website!

Few people will remain indifferent to the A-line skirt, because this model conquers at first sight, first of all, with its elegance. A slight flare of the hem allows you to create a very feminine and sophisticated silhouette, and the deep blue color of the model is a win-win option for creating unique looks in different styles. The A-line skirt is very combinative, and it can be successfully combined with jackets, knitted jumpers or blouses - in any case, you are guaranteed an elegant look and a great mood. A-line skirt pattern in this lesson.

This knitted suit can not only be sewn from the finished material, but also knitted. It consists of a jumper and a skirt - a voluminous top and a fitted bottom - a great collaboration of two completely independent pieces. Together they create an integral ensemble, however, each of them can act separately, as a combi-partner with other products of your wardrobe. For example, such a knitted skirt can be perfectly combined with a loose blouse, and a jumper with denim trousers.

Let's look at a variation on the flounces theme and model a skirt with a one-piece frill that turns into a bow. Perhaps, such a model will seem too voluminous to someone, in this case, you can always reduce both the length of the shuttlecock and the size of the bow itself. The skirt presented in the article is made by us from gabardine, a sand shade that is relevant this season, and looks great! It is better to combine such a product with a tight-fitting top - a top, a short pullover, a blouse, etc.

If you want to give your favorite skirts a new twist, then there is no easier way than adding straps to them! Just look at these adorable models! A classic pencil skirt, a sun skirt and a denim A-line skirt - three completely different models on long straps look equally impressive. We offer you ready-made patterns of these charming skirts that you can sew yourself.

The aesthetics of modern society in terms of wardrobe and appearance follows the path of minimalism - today naturalness, high-quality materials, and precise cut are more valued in clothes. Fashion is cyclical, and the trends that we are seeing today are just another round of history. So let's enjoy this period of time to the fullest and sew one of the most classic skirt models - a four-piece skirt. The modern model is made of denim and looks incredibly feminine and luxurious in a new interpretation.

Why do we love denim clothing? Because it is very comfortable, practically does not wrinkle, does not require any additional care, and besides, it never goes out of fashion! And how many products of various products can be sewn from such fabrics! Today we decided to offer you to model a denim skirt pattern that will fit perfectly into any wardrobe and can even be a great alternative to jeans that are so firmly rooted in it.

When warm days begin, and we spend most of our free time outdoors, it can be difficult to find an extra minute for sewing. Despite the fact that during such periods there is less time left for creativity, craftswomen are ready to sit at the sewing machine at night to show off in a new thing in the morning. In such cases, ready-made patterns come to the rescue, which significantly save time and effort and help to create exactly when it is needed. The asymmetric wrap skirt is one of the most popular skirt models that almost never goes out of fashion and is quite easy to sew. In this tutorial, we have prepared for you a ready-made pattern of an asymmetrical wrap skirt in 5 sizes, which you can download absolutely free.

Simple - does not mean boring at all, because the basis for creating bright things is not complexity, but the originality of the idea! Tatyanka skirt, which we suggest you sew in our next lesson, brilliantly confirms this well-known rule. It is so easy to sew that even beginners can sew such a model in just an hour. In this case, the result will be amazing! What is a Tatyanka skirt and why is it so easy to sew? The whole secret is that you do not need to build a pattern for such a skirt. The product is sewn without a pattern from a rectangular piece of fabric, gathering or folds are performed at the waist. From our next lesson, you will learn how to calculate the required amount of fabric for a skirt, as well as cut out and sew this sunny Tatyanka skirt on the belt.

A wrap skirt with an asymmetrical hem line, the pattern of which we offer you in this lesson, is not only a real hit of the season - it may well become a hit in your wardrobe! Made of thin pink foam cotton with a one-piece belt, this skirt will perfectly emphasize the waist line and correct the lush hips. Light side flares and deep folds visually change the proportions, stretching the lower part of the figure, while the open wrap line allows you to showcase your beautiful legs. If you decide to sew such a model for yourself, you do not have to spend time on building and modeling a pattern, because you can download a ready-made skirt pattern in 5 full-size sizes for free!

Using simple geometric shapes in modeling can give amazingly interesting results, and the skirt that we invite you to model is a good example of how you can create a real masterpiece with a simple technique. To do this, you do not need to resort to any intricate folds, draperies, complex cuts, and so on and so forth. Rectangle-circle-rectangle is an axiom that should be remembered and used as often as possible! Modeling a straight skirt with a frill - in this lesson.