Braid with one ribbon. Weaving braids from a minimum number of strands with a ribbon. Openwork braid with two ribbons

In this master class, you will find a beautiful ribbon in a braid with kanzashi flowers - an original decoration for long hair.

The accessory consists of six movable flowers and a lush central bow with an additional flower attached to a clip. At first glance, the craft seems complicated, but in reality you need to make several identical elements. Step-by-step photos and detailed descriptions will help you understand the intricacies of needlework.

Preparation of materials for needlework

Floating jewelry is put on a sliding white ribbon 1.2 cm wide, which is woven into a braid. For one braid two such flower strips of 60 cm.

Materials for execution one mobile flower in kanzashi style:

6 pieces of purple and lilac satin ribbon - 5 * 5 cm;
6 squares of white ribbon - 2.5 * 2.5 cm;
half bead "dew" with a diameter of 0.8 cm;
beads to match the material - 12 pcs.;
silver hugger - a circle with rays with a diameter of 1.8 cm;
felt base under the middle with dimensions of about 2.5 * 2.5 cm;
a circle of felt under a flower with a diameter of 4 cm;
regular white elastic band (or elastic stretch trim) - a piece of about 3.5 cm.

Since for the manufacture of a ribbon in a braid you need six identical kanzashi flowers, multiply the number of specified materials by six.

Materials for manufacturing main bow for upper attachment to the braid:

4 wide pieces of lilac ribbon measuring 5 * 10.5 cm;
4 strips of white openwork lace (mesh in the form of diamonds) - 2 * 10.5 cm;
a long and thin strip of satin white ribbon -1.2 * 12 cm;
felt under the clip - a circle with a diameter of 4 cm;
clamp - length of the metal case 7.5 cm.

For big flower crowning the central bow, you will need:

16 squares of white and eight lilac satin ribbons 5 * 5 cm;
8 squares of lilac, white and purple ribbons 2.5 * 2.5 cm each;
felt circle under a kanzashi flower with a diameter of 4 cm.

For simulation middle central flower:

lilac adhesive-backed crystal, 1.4 cm;
silver rhinestone chain about 7 cm long;
white beads, 5 mm;
scattering of lilac beads;
felt circle with a diameter of 4 cm.

For decoration brushes(ends) prepare:

4 beads of lilac and white flowers, 0.8 cm each;
2 huggers - silver bells.

The crocodile clip will help to fix the main bow on the hair to model a beautiful hairstyle. It is convenient to tie the end of the braid with ribbon tassels.

How to make a ribbon in a kanzashi braid

It is better to postpone this MK if you are going to work in the kanzashi technique for the first time. The flower is not very complicated, but making six identical products so that they are a copy of each other is not so simple. Get your hands full by picking up both ponytail and braid elastics with one decorative piece.

If you are an experienced craftswoman, then feel free to take up needlework and pay attention to and.

Collect all materials and accessories for work.

From purple and lilac segments, make a double round kanzashi petal (only six pieces per flower). Fold the squares diagonally.

Fold both resulting triangles together, holding the structure with a clamp or needle, lower the corners down. Round the central gap, pull the ends back, cut off, forming a rounded droplet petal.

From a white ribbon half the size, make simple sharp petals by folding twice diagonally and rounding.

Collect purple roundness on a thread. Small simple sharp petals (6 pieces for each flower) are glued between the round ones.

Glue a beautiful transparent half-bead on a felt circle measuring 2.5 * 2.5 cm and sheathe it with beads. Next, cut around the circumference carefully so as not to touch the threads (you can singe the felt a little from the inside). Glue the resulting decor item onto the water lily hugger.

Decorate the centers of all the flowers for decoration. Cut the felt circles with a diameter of 4 cm prepared for the floating decor in two places to insert the elastic.

Using a glue gun, glue the ends of the elastic to the base. Connect all elements.

Following the master class, make six beautiful floating flowers. They all need to be the same, otherwise the kanzashi-style braid will look messy.

For the top bow, cut the lilac wide and white pieces from the mesh.

Align parts of different textures along the length and assemble volumetric loops, burning the ends with a lighter.

Prepare a batch of lilac and white squares in the indicated sizes to model the beautiful five-layered petals of the central flower.

Bend large and small squares twice.

From the resulting triangles, assemble two sandwiches, overlaying large parts on top of each other and small ones.

Curl the larger part of the petal, cut off the bottom in the form of a boat, do the same with a small slice. Then glue one piece to the other.

Glue eight five-layer elements around the circumference.

Similarly to the sharp white kanzashi petals, collect purple from squares of the same size.

Glue eight purple slices between the large main petals of the flower. Add a felt circle on top.

On the reverse side, also stick a felt circle, but larger.

Make a shining center in the previously indicated way, using a large crystal, a piece of transparent rhinestones and small beads.

Cut the felt along the outline.

Glue to the kanzashi flower on a small felt circle.

Collect a lush bow from previously prepared loops, rewinding the workpiece in the center with a thin satin strip.

Glue the decor on top.

Decorate the tassels with beads and bells, they will decorate the ends of the braid.

Glue the crocodile to the back of the bow using felt.

String floating decorations on the ends of a long ribbon - three pieces each.

Glue the loose ends to the bottom of the bow.

By the way, according to the same principle, it is easy to make jewelry for yourself or children with or described in our MK. Experiment with shades and shapes!

A master class on making a kanzashi ribbon in a braid for beginners was prepared by Svetlana Sorokina, step by step photos of the author. Especially for the online magazine "Women's Hobbies".

Currently, the interest of the female half of humanity in a variety of hair accessories is increasing. Many people prefer something more original to hairpins and hoops that are familiar to us - ribbons. The ribbon will wonderfully decorate any hairstyle, make it more interesting.

With this wonderful accessory, you can give a festive look to even the most ordinary daily hairstyle. Also recently, braided hairstyles are back in fashion. Photos of several types of decorating such braids with ribbons will be placed just below.

There are many types of braids and, accordingly, many ways to weave a ribbon into these very pigtails. It can be added to regular braids, French braids, four-strand braids, and even dreadlocks! The main advantage is that if you make such a hairstyle well, then it will look simply charming both when you go to visit or to a party, and at school, university or at work.

The most important thing in this business, as in many others, is to learn how to weave the ribbon into the braid correctly. And then every time you will get better and better.

The article will talk about the most popular method (the usual side of three strands). Please read this material carefully before starting work. We will try to tell you as simply and clearly as possible about how to weave a ribbon into a braid. The main thing is attentiveness. with ribbons - the work is not too difficult, so you can do it without outside help. The main thing is to have all the necessary devices, namely:

The hair brush or comb you use;

A small brush for bouffant;

Two transparent elastic;

Tape (color and thickness to choose from);

Hair fixation spray.

Comb your hair thoroughly along the entire length. There should be no knots and tangles, so it is worth combing each strand separately.

We take one small strand at the back of the head, lift it up and make a light pile at the roots. Repeat this procedure for the rest of the hair. Then we lower them to their original place, combing slightly from above, so that no traces of fleece can be seen on the surface. We throw the hair over one shoulder (right or left, to choose from) and make a ponytail, fastening the hair with an elastic band at the ear.

We take the tape and wrap it around the elastic band twice, then fasten it with a knot. We divide the hair into three equal strands (left, right and middle), adding our tape to one. Now weave an ordinary braid in the following way: throw the left strand over the one in the middle, making it a new middle strand. Then, holding one strand with one hand and the other strand with the other, make the braid tighter by spreading both hands slightly to the side. Now the right strand must be similarly thrown over the middle one. Re-tighten the weave. So keep going. Not reaching a few centimeters to the end of the hair, we fix the braid with a second elastic band woven into it with a ribbon.

Fix it all with a little hairspray. Ready! Now you know how to weave a ribbon into a braid! As accessories, you can use a hoop, hairpins and the like.

A long time ago, the braid was very popular. She met on the head of girls quite often. To date, this hairstyle has become no less popular, but there are much more variations of it. By mastering the technique of weaving a braid with a ribbon, you can stay on trend and look great at any time.

What is required for work

Before you start work, you need to prepare everything you need so that during work you are not distracted by extraneous matters. For this you will need:

The main benefits of hairstyle

Among the advantages of this hairstyle are the following:

this is a great option in the cold season, as it will perfectly retain its shape after a headdress;
this is a universal hairstyle that is suitable for any celebration or just for every day;
this is a great way to show your individuality and amaze others with your skill.

Step-by-step weaving and diagrams with a description

There are many variations and patterns of weaving braids. Each weave is unique and beautiful in its own way. The most popular options today are: spikelet (French spikelet) and 3D braids (consist of 4 or more strands).

It is better to start with something simple and easy, especially for beginners, and then move on to more complex weaving. The main criterion in weaving will be the purity of the hair.

Order of execution:

Initially, such a braid seems very simple, but it is not. This hairstyle can serve as a great alternative for every day, and the woven elements can change the hairstyle into a more evening and formal version.

Of three strands and ribbon

This is a classic braid pattern. Only this time, a ribbon is woven into it. Sometimes it may not work out the first time, but do not despair and learn. The most difficult thing is to do this hairstyle on your hair, so for training you can try it on a friend or on a mannequin.

The procedure for creating a hairstyle is as follows:

You can fix the hairstyle with varnish at the end, but it is undesirable to use a strong fixation, it forms a crust and the hairstyle looks unnatural.

Four-strand with one center

A huge plus of this hairstyle is that it looks voluminous on any hair. To make the braid look more voluminous, you need to include hair on both sides as you weave.

To make this hairstyle, follow the instructions:

This scheme is more complex than the previous ones, but after you master it, the rest will be easier for you. And learning to mastery will be faster.

- an excellent basis for many weaves. Of these, you can weave a braid of three, four, five and even more strands. In this description, you will learn how a braid with a ribbon of three strands is woven. It will be a beautiful twisted braid that can be braided for a girl to school.

You will need a comb with a thin end, with which it is convenient to part in the hair. Also prepare the ribbon, its width should not be large, a ribbon of 1-1.5 cm is suitable. The length of the ribbon should be twice the length of the hair in order to braid the pigtail to the end. But you can use a smaller ribbon, then the braid will have a tail.

How to weave a pigtail with a ribbon (twisted braid) - weaving diagram step by step with a photo:

Comb your hair thoroughly first. In weaving, the combing process is one of the main ones. Weaving will never look beautiful on uncombed hair.

Using the end of the comb, make a horizontal parting. It is required to separate about 1/3 of all hair. For now, you can remove the lower hair to one side and fix it there in the tail.

Separate a strand of hair on the left and attach a ribbon under it. For fastening, you can use silicone rubber.

Divide this section of hair into three sections. Put the rightmost strand of hair on top of the second strand.

Then start weaving the ribbon. To do this, put it on top of this strand (which was the first on the left).

In the next step, weave the right strand. It must be passed under a strand of hair and placed over the ribbon.

Now weave the left strand so that it lies above the hair strand and under the satin ribbon.

So we weave, observing a simple rule - a strand of hair on the left is always above the neighboring strand and under the ribbon, the next right strand is woven under the hair and above the ribbon. In short, you can remember "left - under, right - above."

The strands that you pick up on the left should form an even parting path.

The tape lies over the strand and over the extra hair that you take when you grab it and sort of tightens it, but slightly.

To weave the strands on the left, pick up hair from the front of the head.

Strand after strand should lie flat so that the front view does not resemble undulations.

To twist the braid, pick up the hair with your right hand only. On the left, the hair should hang freely.

Weave like this 2-3 times.

Now grab with both right and left hand. But when you take extra hair with your left hand.

Try to make a parting, then to pull and align the braid with this hair in a downward direction.

Hair grips should be taken in equal amounts and follow the same rule “left - under, right - over”.

Next, pick up one or two tight grips of the hair on the right and the braids will take a vertical direction.

Weave to the point where the ribbon lasts.

To prevent the braid from turning, fix it with 102 hairpins.

Now we take on the fluffing of the braid so that it looks more voluminous.

With two fingers of the right and left hands, simultaneously pull the curls in different directions. As in the photo.

It will turn out such a volumetric weaving with a ribbon.

At the end, the pigtail can be decorated with hairpins with black and white kanzashi flowers.

A pigtail with an interwoven ribbon looks elegant and neat. With such a universal twisted braid, you can go to school and cafes.

One of the most luxurious and spectacular accessories for braids are ribbons: openwork, satin, multi-colored. Braids with ribbons woven into them look unusual and fresh. Many mistakenly assume that such hairstyles are the choice of little girls. Actually it is not. A pigtail with a ribbon will perfectly complement any look and age, becoming an adornment for an event of any level. Today we will show you the creation schemes and tell you how to weave a braid with a ribbon, supplementing the lessons with step-by-step photos and videos.

Variations of "ribbon" braids

Violent imagination and indefatigable creativity of craftswomen have led to the fact that at the moment there is a sea of braid options with ribbons. These are intricate four- and five-strand braids, French variations, heart braids, baskets, spikelets, openwork weaving. If you figure it out and practice a little, then the patterns of their weaving will not seem tricky and complicated to you.

Consider step by step how to braid a braid of four strands with a ribbon.

We agree, you will have to work hard, carefully and step by step creating each link. However, the game is worth the candle - the result of your efforts will be an exclusive braid, as in the photo below, which you will definitely not find similar in your surroundings!

If we missed something, the presented video will help you fill in the gaps.

Three-strand braid intertwined with ribbon

Three-strand braids with thin ribbons look no less interesting. Despite the apparent complexity of execution, their weaving patterns are extremely simple. Let's analyze one of them step by step.

The completion of the work done will be such an elegant pigtail.

Weaving braids with ribbons is not such a difficult task as it seems at first glance. Everyone can master the technique of creation with persistent desire. But the result of all efforts will be a truly original hairstyle.

We present to your attention a few more interesting video tutorials: