Do-it-yourself non-slip sole for winter shoes. The most non-slip sole

For our climate, ice is such a common occurrence that people have already come up with many means, thanks to which it becomes possible to minimize the likelihood of an unwanted landing, with all the ensuing consequences. So, what do pedestrians need to do so that doctors in emergency rooms have less work to do, and they themselves do not have to lie in a cast all winter?

The sole, which in itself is not slippery, is one of the most important points for ensuring one's safety when moving through the streets during icy conditions. In order to choose the right shoes, you will need to be guided by the following rules:

1. You need to pay close attention to the relief of the sole. The ideal option is a tread with a uniform deep pattern, the elements of which will be directed in different directions (thus it will be possible to provide the maximum friction force that prevents a fall).
2. When shopping for shoes in a store, be sure to check how much they slip. To do this, it will be enough to run the sole on the smooth floor of the store. And one more thing - shoes made of low-quality materials at low temperatures become more slippery and hard.
3. Recently, shoes such as ugg boots have become very popular. Please note - they can only be worn if they are adapted to the cold winter and movement on ice.
4. In winter, there can be no talk of any smooth soles! You can learn to "balance" in such shoes, but why once again expose yourself to unjustified risk?
5. The sole must be soft. The softer it is, the higher will be the adhesion to the frost-bitten surface.
6. Remember: in winter, the most important thing is not the appearance of the shoes, but its reliability. Agree, ensuring your safety on the ice is much more important than "being in trend."
7. The country of origin also matters. Shoes made in Russia or in the Scandinavian countries would be preferable.

Slippery soles: what to do?

1. In the event that the purchase of new shoes is not included in your budget, you can limit yourself to using removable rubber soles equipped with steel spikes. This, of course, will not add aesthetics, but the probability of a possible fall will be minimal.
2. It is possible to use "anti-ice" sole pads, which are attached directly to slippery soles.

Do not forget about the time-tested folk methods of dealing with ice. Here are some of them:

1. Using strips of sandpaper, the back of which is adhesive. This option is quite effective (three days of safe movement on ice is guaranteed) and does not spoil the appearance of the shoes as much as all the others.
2. Glue "Moment", applied to the soles of your shoes, will perfectly protect against slipping for a week. Just before going outside, it will be necessary to grind it with a large emery cloth.
3. To ensure the safety of movement along the street in ice, old felt boots can be used. To do this, it will be necessary to cut them, and attach pieces of matter to the sole with small carnations.

Possible shoemaker help

Putting soft polyurethane or metal heels is the best thing a shoemaker can do to keep your soles from slipping. Yes, and piercing the soles does not hurt.

In many cases, people decide to turn to shoemakers for help. And this is understandable - for a relatively small fee, they can make the soles of your shoes significantly less slippery, without violating its aesthetic appearance.

Proper gait on ice

1. You need to walk slowly, while carefully looking under your feet.
2. Never keep your hands in your pockets. Balance will be much easier to maintain even if both hands are occupied by the load.
3. We choose the safest route.
4. It is best to move in small steps.

Which method is preferable

Each of these measures to make your soles less slippery has its own advantages and disadvantages. Home remedies are inexpensive, but their effectiveness is short-lived. But the shoemaker can improve your shoes quite reliably, but he will have to pay for the work.

So it is best to combine several of the above funds on one pair of shoes. This will allow you to protect yourself as much as possible when walking on ice. A good example is that on a sole equipped with metal heels, you can apply glue for a moment, let it dry, and then grind it. Efficiency will exceed all your expectations.

And in conclusion, we re-focus your attention on the fact that winter shoes in ice should first of all be distinguished by their functionality and reliability, and the issue of aesthetics is already fading into the background. Pregnant women and the elderly should be especially careful when moving on ice, since they have the maximum possible harm to health from a fall. In the event that, nevertheless, the fall could not be avoided, in no case try to fall "on your hands". The chance of a fracture is very high.

When choosing shoes, we first of all pay attention to its appearance, price and convenience. And only when we are in a new thing on the street, especially on ice, we begin to think about such an important quality of shoes as a non-slip sole. But slippery shoes threaten not only discomfort, but also the risk of injury when walking the streets, especially for the elderly.

So how do you choose shoes that are sure to be non-slip at all times?

Winter non-slip shoes are characterized by a rather embossed sole with significant flexibility, which provides good grip on any road and prevents slipping from bumps and bumps. If we talk about the material, then the polypropylene sole is considered less slippery than the rubber one. It is not advisable to give preference to high heels in winter, because such shoes will not be stable enough and will begin to slip.

If you have already bought shoes and it turned out to be unstable - do not despair. There are several proven ways to make the soles of shoes non-slip. Conventionally, they can be divided into professional methods and folk advice.

1. You can give relief to a flat sole yourself with a nail, grater or any sharp object. But do not overdo it, so as not to damage it too much, which may affect the moisture and heat resistance of the shoe.
2. Use coarse sandpaper. It is useful not only for rubbing the sole and scratching it in this way, but also for sticking individual patches on the heel and toe, which will provide more comfortable movement in ice.
3. Sticking materials such as fabric-based patches, felt, durable foam rubber or rubber to the sole will significantly reduce the sliding properties of the shoe.
4. You can build improvised spikes on the sole. To do this, you need small screws and nails.
5. The original method should be used if you have Moment glue. It consists in the fact that the specified glue is applied to a slippery sole over its entire surface with ornate patterns, and sprinkled with coarse sand or small pebbles on top. Leaving the shoes after that for a day to dry, you will get universal all-terrain vehicles.
6. Surprisingly, rubbing the soles with raw potatoes also gives a good effect and helps to stay more stable on the ice.

As you can see, making winter shoes non-slip is not so difficult.

For this, only desire and a few quite accessible materials are enough.

Professional anti-slip shoes

If you are not a fan of improvisations and are ready to fork out, then we are in a hurry to please you: today there are several varieties of special devices on sale that will provide a non-slip sole for winter shoes. Among them are the following:

Related articles:

The transitional period has begun. Ice on the street.

Even the softest sole on a shoe may not save a person from ice and slipping. The risk of falling in these conditions and injury is very high.

Now we will consider several options - how to make anti-slip pads for anti-slip shoes at home with your own hands. And if you do not have the opportunity to buy these linings, then we will tell you how to make sure that your shoes do not slip in ice.

1) Option 1.

We take an old felt boot. We cut off a piece from it and nail it with small carnations to the sole of our shoes. Or glue it to the sole. Usually such an option using an old felt boot (a piece of felt is also suitable) will help to resist slipping shoes if there is no rain (not damp) outside, if there is no snowfall. If all this is present (snow or rain), then the felt will simply take on a small crust and will also slide along the road, as if you were skating. This method protects shoes from ice for 7-10 days. Then the felt is washed off.

2) Option 2.

To make your own anti-icing shoes, you will need Moment glue. Apply glue to the sole of the shoe with a snake.

How to make your own shoes non-slip

Let's let it dry a little. Then with a match we smear it on the sole with a small snake. After a day, when the glue dries, rub it a little with a large sandpaper so that its surface becomes rough. Usually this method protects against ice for 4-6 days (for a week).

3) Option 3.

Simplest. Take a large adhesive plaster and stick it in pieces to the sole of the shoe. The effect is about the same - for 3-4 days you will have enough protection against ice. But it is necessary that there is no snowfall or rain, so that the adhesive plaster does not take on a crust.

4) Option 4.

The hardware store sells special strips with sticky sandpaper (see photo). They are usually used near shops, pasted on the porch so that visitors do not fall in winter. In the same way, they can be glued to the sole of the shoe, like a patch. Usually this method is enough for 2-3 days with ice, as the sandpaper quickly wears out when walking on asphalt or at the entrance of the house.

5) Option 5.

The use of various heels made of polyurethane. This material is soft, like silicone, and does not tan when iced. Therefore, it clings well to the ice and prevents a person from sliding on it. Usually these heels last the whole season.

6) Option 6.

Metal heels. They are manufactured and sold specifically for those regions where ice is frequent. Or for special services that work in the mountains or in conditions of frequent slipping of shoes. These can be special heels with spikes, with nails, heels around the perimeter of the shoe, etc. But in the city, where after the street people enter the room, these heels are somehow uncomfortable, they knock like metal horseshoes. Therefore, they should be used only as a last resort, when other methods do not help.

7) Option 7.

Special anti-icing pads for shoes. They are rubber. And from below they have metal spikes, like a studded car tire. Wearing such slips on shoes, a person will walk very steadily on ice and not fall.

And the most important thing. How not to fall into the ice.

First tip. It is necessary to choose shoes specifically for winter. That is, so that the sole is not made of plastic, which in the cold becomes “oak, wood” and slides like skates. And to be made of polyurethane, which remains soft in the cold.

Second tip. The sole of the shoe must be grooved. Then she will "grab" the ice, preventing her from slipping.

Third tip. Develop the habit of walking in ice in a special way, not like in summer. How to walk on ice? Very simple: a) we bend our legs a little at the knees and do not straighten them to the end until we step on a normal, stable surface. b) take small, short, slow steps. If we go fast, wide, if we run, then we will quickly fall into the ice. C) be sure to look under your feet, marking areas with ice. If we do not look under our feet, then we will not be ready for dangerous areas, and the risk of falling in this case is very high.

Helpful Hints:

How to cut a snowflake out of paper in 1 minute: HERE.

Buying shoes for the winter is more difficult than for any other season. I want it to be stylish, beautiful, comfortable, warm and reliable at the same time. Choosing a shoe that combines all these qualities is not easy.

And there is one such important detail as a slippery sole. It can bring a lot of trouble and discomfort in winter. But it is about her at the time of purchase that is often forgotten.

So what to do if you have already purchased shoes, but it turned out to be slippery? How to deal with this problem at home? Let's consider several ways.

How to make the sole non-slip - adhesive plaster, sandpaper, felt

These are simple and common methods that were used by our parents.

• Adhesive plaster. Only not bactericidal, but on a coarse fabric basis. Cut off suitable pieces and stick them on the toe and heel of the shoe. This method is short lived. The patch quickly wears off, gets wet and peels off. We must be prepared for the fact that it will have to be updated at least every other day.
• Felt. The technology is the same as with adhesive tape. But it lasts longer - about a week, if you use good glue.
• Sandpaper. There are two applications. Glue pieces of paper on a cloth basis, as in previous cases. Or just rub the sole well with fine-grained sandpaper, sandpaper. This procedure will need to be repeated periodically.

How to make the sole non-slip - sand, glue, melted nylon

Here you will have to work longer and more carefully, because there is a risk of spoiling the sole. But these methods are considered more effective.

• Sand and glue. Take Superglue or Moment. Well lubricate their soles. And quickly, before the glue dries, sprinkle sand on top. To securely fasten shoes, you need to leave them to dry for several hours.
• Hot sand. Heat the sand in the oven to a high temperature. Take out the pan. Put your shoes on it and wait for the hot grains of sand to stick to the sole.
• Melted capron. Set fire to a piece of nylon, for example, an old stocking. When it starts to melt, drip onto the sole. As a result, bumps are formed that prevent slipping.

How to make the sole non-slip - radical methods

Such radical methods must be treated with caution so as not to spoil the shoes.

• Pattern on the sole. You will need improvised means: a soldering iron, a burner, a hot nail or a rod. With their help, carefully make a pattern or relief on the sole.
• Homemade spikes. Screw small screws into the sole and cut off the protruding parts. Please note that the sole must be thick for this, and shoes should be used exclusively on the street.

How to make the sole non-slip - ways for every day

These methods are the easiest to perform, but you will have to do the manipulations every day.

• Raw potatoes or hairspray. Rub the sole with raw halved potatoes before going outside. Or generously spray hairspray over the entire surface.
• Thorough frequent washing. It will help if the sole is embossed, not smooth. After each trip to the street, thoroughly wash your shoes, cleaning the dirt clogged in the cavities on the sole.

Having tried all these methods, you can, of course, find your best option in the fight against slippery shoes. But it is still better to turn to professionals in the workshop. They know their business well and will help to cope with the problem quickly, reliably and aesthetically.

The first snow has already fallen. It is cold at night - and with a slight thaw, ice forms. A period of bruises and fractures threatens those who do not know how to protect themselves from falling on the streets.

Proper footwear

We advise you to postpone chic high-heeled boots until spring weather. Look for simpler shoes in stores. Examine the sole. Smooth - not at all for the winter months. You need a tread with a deep and even pattern so that the shoes do not slip when you have to walk on a snow-covered street.

Put on your boots and go shopping. Is the sole flexible enough? The softer it is, the better it will keep you on a frosty surface. And in low-quality shoes, a stiff mark will harden even more.

Overlays "anti-ice"

If you do not have money for expensive shoes, we will show you how to make the soles non-slip on your boots or boots. Buy removable soles made of good rubber. They are equipped with steel spikes. The view is not very elegant, but the risk of injury is minimized.

Another way is anti-ice pads. These are hoops, chains and other devices worn on shoes or boots.

Buy led access - rubber stretch for shoes. They have a metal sole with spikes. Very good ice protection. The disadvantage is that the metal knocks heavily while walking on the floor, asphalt.

On sale there are also "rubber socks" with screws, but without an iron plate. This option is not noisy.

Shoe workshop

Contact a shoe repair professional. They will put a prophylaxis made of rubber or rubber. This is a great tool to keep your balance on a snowy track.

Also use soft polyurethane heels. You are saved for the whole winter. Metal ones work too. They are placed around the perimeter soles. They come with thorns or small carnations. However, in this case, you will start to click in the subway and on the pavement like a good horse. But on a slippery street, it will keep you from falling.

Miscellaneous recipes

Our grandmothers coped well with the problem of instability on winter roads. They knew what to do to keep the shoes from slipping. For example, they cut off two pieces from old boots and glued them to the sole or nailed them with small carnations. True, such protection against icing lasted 7-10 days.

You can use Moment glue to draw a thick snake on the sole. Dry and grind to small zigzags. After a day, walk with a large sandpaper so that the sole becomes rough. But this way - for a week.

Sprinkle more sand on the smeared sole with resin-based glue. Get a layer of anti-slip agent. In this case, the glue will not dissolve in the snow.

Some people apply several layers of plaster or sticky emery strips. A day or two quietly walks along the street. But with snow and rain, shoes with a plaster turn into skates.

Home craftsmen recommend sticking on shoes and sponges for washing dishes. But this is short-lived and not aesthetically pleasing. Therefore, it is better not to save on health, but to buy branded shoes that are prepared for walking on slippery streets.

Olga Nikitina

Reading time: 9 minutes

A A

You can't envy doctors from emergency rooms now - they have begun a hot season of bruises and fractures. And the reason for everything is ice, again the ZhEKs did not have time to prepare for the winter and illiterately chosen shoes.

Proper footwear for icy conditions, special shoe covers to protect against icy conditions

The rules for choosing anti-slip shoes are quite simple:

• We focus not on the trend and the height of the studs, due to which our legs are visually lengthened, but on protection against falls and on reducing the risk of lying in a cast for a couple of months. The country of origin is better to choose the one that is familiar with the cold – Russia, Scandinavian countries, Ukraine.
• We study the sole. Requirements: tread - with a uniform deep pattern directed in different directions (for better grip on an icy road).
• Putting on shoes and trying to feel the traction on the slippery floor of the shop. Remember that the sole hardens in the cold, and low-quality shoes will be slippery and hard in the cold.
• We pay attention to everything we love ugg boots only if they adapted to the Russian winter and have improved soles (comfort, tread).
• No smooth soles! Even if you don’t want to take off this “charm”, and the sensations in boots are “like in slippers”. Of course, you will learn to balance in them (by the end of winter), but at first you will have a hard time.
• Check the softness of the sole. The softer - the higher the adhesion to the frost-bitten surface.

Video: How to walk on ice?

No money for expensive high-quality shoes? We buy removable soles based on high-quality rubber equipped with steel spikes. Not particularly elegant, but the risk of falling will be minimized.


Another option - lining "anti-ice" in different versions (hoops, chains, etc., worn on the soles).

Slippery shoes - what to do: the best home remedies for ice on the street

Properly prepared sole - successfully experienced winter.

What "grandmother's recipes" are used today to protect shoes from untimely slipping?

• Felt. We cut off a couple of pieces from old boots, after which we glue (or nail with small carnations) to our sole. Such protection against icing will last you for a week, a maximum of 10 days.
• Clay Moment. Apply with a neat snake to the soles, dry, smear with a smaller zigzag. After a day, rub with a large "skin" to a state of roughness. This "antilda" is enough for a week.
• Glue several plates to the sole classic large patch . For a day or two, you can feel more confident. As in this case, and in all others that involve gluing fabric "fuses" to the soles, you should remember: in rainy weather and in snowfall, these devices turn your shoes almost into skates. Therefore, they are not suitable for "wet" weather.
• We buy special emery strips (available in any household / stores) on a sticky basis, glued on the soles, for 2-3 days we forget about the pose of a tightrope walker.

Also craftsmen rub the soles raw potatoes, sprinkle sand over freshly applied glue, glue sponges for washing dishes, etc. But such products are short-lived and do not differ in aesthetics. Therefore, it is better to immediately choose high-quality shoes, taking into account all the nuances of "anti-slip".

What can a shoe shop offer to protect shoes in ice on the street?

• We put soft heels made of polyurethane in the shoe shop and throughout the season we move cheerfully and without fear. To be sure, you can also spike the soles in the same place.
• We put metal heels(along the perimeter, with spikes, with carnations, etc.). Clicking on them in the subway and other public places is not very decent, but on the street you can be calm.

How to walk in ice on the street?

As soon as ice appears on the roads, we begin to move through the streets, as if with crystal vases in our hands (from a sideboard with family treasures). And it is right! You should not count the remaining bullfinches and study yourself in shop windows - look under your feet(the ice of mouthing does not forgive).

Therefore, we remember Rules for competent movement in ice:

• We change our walk. We do not run after the bus, we do not hurry, we walk slowly, with small steps, stepping on the entire sole.
• We don't keep our hands in our pockets. With a sudden fall, this recklessness can cost not only a fracture, but also a traumatic brain injury. Hands busy? Distribute your weight evenly on your hands.
• Don't forget the right shoes.
• Calculate dangerous sections of the path and change the route in advance (or go as carefully as possible).
• Drive with caution along the roads - reduce the risk of flying directly under the car.
• Learning how to fall properly We do not fall on our hands to exclude fractures and sprains. When losing balance, we try to group, bend our knees (in the direction of fall) and press our hands to the body, and touching the ground, we roll over to “dissipate” the impact force. Avoid falling on your back with any acrobatic stunts.
• Keeping the body while walking slightly leaning forward .
• Don't kick back , if someone hurt his shoulder, being late for his business.
• Don't miss a visit to the doctor , if, nevertheless, the fall occurred, and the blow was strong.

If you are not very careful, the recommendations fly out of your memory immediately after reading, and you will not remove the hairpins “never and for nothing”, then carry it with you in your purse a pair of cotton tights or stockings - in the emergency room, they will come in handy. A stocking pulled under the cast will protect you from itching, skin irritation and the feeling of tight hairs.