Mistakes when applying gel polish. Step-by-step technology for the correct application of gel polish at home

Nowadays, it is not difficult to make a stylish manicure at home. The stores offer a wide range of special devices for creating a manicure: varnishes, gel coatings, stencils, etc. Until recently, home manicures were notable for their fragility, the reason for this was the weak durability of the varnish. But now everything has changed, it has become public gel polish or, as it is also called, shellac. The main feature of this material is that it stays on the nails for more than two weeks.

What is gel polish in manicure

The procedure for creating a manicure using gel polish is currently offered in almost every beauty salon, and there are also a huge number of manicure specialists working at home. Recently, many girls began to buy all the necessary equipment for creating a manicure using a gel coating, and, accordingly, do it at home. But, nevertheless, when all the necessary materials have already been acquired, the question arises: “How to do a manicure?”. We will answer this question by talking in detail about the technology for the correct application of gel polish at home.

Before you start creating a manicure, you need to understand what gel polish (Shellac) is. The gel polish itself is a porous polymer that allows air to pass through. It has a number of advantages:

  • It lasts up to 4 weeks, which saves time on manicure, because even the best varnish does not last more than 5 days.
  • It does not require any special skills, it is applied quite simply.
  • Variety of color options. Every girl can choose a gel according to her mood.
  • Gel polish perfectly levels the surface of the nails of the plate;
  • Does not spoil the structure of the nail itself.

However, such a manicure also has its drawbacks, which in general do not spoil the overall picture of its merits. For example:

  • The high cost of the procedure, especially if you do a manicure in the salon, then a high-quality and neat manicure from a good master is not very cheap. Applying gel polish on your own at home also requires the cost of tools and materials (UV lamp, special acetone-containing liquids, etc.)
  • Wearing a manicure using shellac for a long time is harmful. Therefore, after 4-5 times of application, the nails must be given time to rest and recover.
  • Difficulty in removing gel polish. This will not work with regular nail polish remover. It is necessary to use only acetone-containing liquids and spend a sufficient amount of time on the procedure for removing the gel.

What is needed to create a manicure

To create a durable high-quality shellac manicure, you need to have a certain set of tools and materials.

Before coating the nails with shellac, they must be well processed, for this you will need the following tools:

  • . They are used to process the free edge of the nails and give them the necessary shape.
  • . Needed to get rid of overgrown skin at the base of the nails.
  • . It is used for polishing the surface of the nail plate, as well as for removing the keratin layer.
  • . Used to align the free edge of the nail plate.
  • . Used to remove excess cuticles.
  • . With their help, you can easily lift and push back the cuticle.

After processing the nails with the above set of tools, directly to create a manicure, you will need the following materials:

Possible errors when applying gel polish

Gel polish technology is famous for its strength and durability, in theory this is true if you know all the intricacies of applying gel polish. However, in practice, due to lack of knowledge in this area, girls, doing manicures at home, make a number of mistakes that can subsequently shorten the period of wearing a manicure, lead to cracks and chips in the coating. To avoid these unpleasant consequences, we will talk about the mistakes that should not be made when applying shellac:

  1. Before processing the cuticle, some masters soak their nails with a bath, and so, it is important not to overdo it here, otherwise it can lead to excessive moisture of the nail plate and you will have to resort to the help of a dehydrator.
  2. If the cuticle is poorly processed and the nail is not cleaned well enough from pterygium, then air can get under the gel polish, which will further lead to peeling of the artificial coating.
  3. If the nail plate is not sanded well enough before starting to apply shellac, especially in the area of ​​​​the cuticle and free edge, this can also lead to premature peeling of the varnish.
  4. Insufficient degreasing of the nail plate with the help of special tools also reduces the period of wearing a manicure.
  5. Disregard for the processing of the end and sides of the nail with special tools (primer, ultrabond), which ensure good adhesion of the gel coating to the nail plate.
  6. Applying too thick a layer of gel polish. Each layer should be thin to avoid insufficient drying.
  7. It is also important to seal the cut (end) of the nail with each subsequent layer, so your manicure will last longer.
  8. If your nails are thin and often break, then it is better not to neglect the use of a strengthening gel and align the nail plate with a base. It is better to use a soluble gel so that when removing a manicure, avoid cutting off.
  9. It is very important to take seriously the choice of such products as the base and top, because they are responsible for the quality of your manicure and ensure its durability. In no case should you save on these materials.
  10. The use of single-phase coatings is also undesirable. Use three-pot gel polishes, then it will be much easier to avoid premature peeling and chipping.
  11. Avoid using gel polishes that can only be removed by filing. This procedure can often threaten to damage your nail plate. Use coatings that require soaking.

If you follow these simple rules for applying shellac, you will be able to please yourself and those around you with your beautiful nails much longer.

Is it possible to remove gel nail polish at home

Nails covered with gel polish do not require specific care, the rules for its maintenance. However, getting rid of the “overgrown” manicure is more difficult than getting rid of the usual varnish. In a specialized cosmetic store, you need to purchase gel polish remover (Shellaca).

Removing gel polish from nails at home

So, they need to moisten the cut cotton pads (Fig. 2), attach them to the nail platinum and wrap each nail with foil so that the product does not evaporate (Fig. 3). After waiting about 20 minutes, remove the foil and cotton pads, the gel will come off with them (Fig. 4), its remains can be removed with an orange stick and sawing off with a grinding file (Fig. 5).

You can read more about removing gel polish, including with a machine, in the article:

The use of gel polish in manicure is the smartest solution in creating a manicure. In order for it to please you for a long time, it is necessary to use rubber gloves for prolonged contact with water and household chemicals.

Video: Technique for applying gel polish at home

beautiful and healthy

For a manicure to be beautiful, the nails must be healthy. Gel polish is not applied to thin, brittle and exfoliating nails. Most coatings simply will not be able to stay on them. In addition, gel polish can even be harmful to such nails. There is only one that is acceptable for problem nails.

There are many ways to keep your nails healthy. It is best to combine:

    Taking good vitamins

    Regular manicure

    home care procedures

Constant care for the nails will soon bear fruit. And to make it easier for you to navigate this difficult issue, get acquainted with ours. In addition to it, it will not be superfluous to study recipes and, as well as find out. Do not forget which you buy at the pharmacy.

If your nails have already lost their former beauty, use high-quality medical varnishes. They also have .

What is important to know before starting the procedure?

There are a few basic things to remember before starting the procedure. They will help you make the perfect manicure that will stay with you for a long time.

The first and most important rule: the workplace should always be clean. Although gel polish is very resistant to chipping and abrasion, it still has a weak spot. When a mote gets between the layers, the structure of the coating is broken. As a result, already within the first week after the manicure, chips and peeling of the coating may appear.

The reason for the violation of the structure of a manicure with gel polish can even be sawdust after processing the nail plate.

Therefore, professional craftsmen equip their workplace with a special vacuum cleaner.

If you are doing the procedure at home, thoroughly clean the work surface. remove loose makeup away and collect hair in a ponytail.

Gathering tools

If you are going to do a manicure with gel polish for the first time and have not taken training courses, it is important to choose good tools. The quality of a manicure depends not only on the materials that you will apply to the nails, but also on the tools. Cheap files will spoil the structure of the nail plate, due to bad lamps, the layers of gel and varnish will not dry out. Even the wrong wipes can lead to peeling and cracking!

How to choose a saw?

The file must be chosen in accordance with the condition of the nails.

There are different degrees of abrasiveness of saw blades. Fine-grained files are softer. they can be used for thin, damaged nail plates. Rougher tools will work better on thick nails.

No need to take iron nail files - they inevitably lead to delamination of the nail plate.

If you don't like classic soft options, consider glass instruments instead. They delicately file off the nail without harming the structure.

Buff for polishing

In addition to the usual file for shaping the nail plate, you will need a polishing tool. It can be a special soft nail file or a buff.

A buff is a three-dimensional block, on each side of which there is an abrasive surface. They can be different: some are rougher, others are soft. But there are buffs in which the sides have the same abrasiveness.

You need a soft tool that you will use for delicate polishing.

Why do you need a pusher?

A cosmetic pusher is needed to work with the cuticle.

From is a short rod with a beveled tip.

A cosmetic pusher is convenient to use in order to push the cuticle away from the nail plate.

For home use, it is better to take soft models made of rubber and plastic - they are less traumatic. The cosmetic pusher can be replaced with an orange tree stick.

How to choose a lamp?

The durability of your manicure and the duration of the procedure will depend on the lamp. There are three types of lamps: LED, UV and CCFL. Each of them has its own advantages and disadvantages. We described in more detail the recommendations for choosing lamps in.

What else might you need...

In addition to the standard set of tools, you may need:

    Brushes. First, you may not like the basic brush from the product. Some firms are not too attentive to this stage of manufacturing products. It may be too wide or thin. Sometimes the cut of the pile is uneven and as a result the varnish is applied inaccurately. Secondly, brushes will be needed for nail-art.

Required Funds

In addition to tools, you will also need some tools. Although for the coating itself you will only need a base, color and top, you can’t do without the rest of the components.

Cuticle remover

cuticle remover is the cost of our persistent attempts to persuade you to unedged manicure. Remover consists of fruit acids and alkalis. It literally dissolves dead cuticle cells. You can read more about this useful tool.

Degreaser

The degreaser cleans the nail plate from dirt and removes excess moisture. As a result, the base coat adheres better to the nail and the manicure lasts much longer. We have already written a detailed one. It will help you choose the right tool.

Base, color and top

You can choose the base, color and top from any manufacturer. But, if this is your first time doing a manicure with gel polish, it is better to give preference to products from the same line. It could be or. At first, until you get your hands on it, even enough is enough for you. When you have experience, you can safely combine products from different manufacturers.

Klinser

Clinser is a very important tool when creating a manicure with gel polish. It is needed to remove the sticky layer from the nail. Perhaps this step seems like a waste of time to you. But by missing it, you reduce the quality of your manicure and deal a blow to its longevity. about the importance of the clinser and draw a conclusion for yourself: do you need this tool or not.

Cuticle oil

Only at the last stage will you need cuticle oil. gel polish is not compatible with fatty substances, so moisturizing follows the removal of the sticky layer. The oil keeps the cuticle moisturized and healthy. So you protect your nails from infection and deformation of the nail plate. On our website you can find on this score.

As an addition to other tools, you can use . This is a special liquid tape that is applied around the nail plate and prevents you from staining the skin with varnish.

The nuances of applying layers

Having prepared all the necessary tools, you need to study the nuances of applying layers. The correct technique for creating a manicure with gel polish is very important. Without following the sequence and features of the technology, you can not count on a durable and beautiful coating.

lacquer square

The first nuance you need to get acquainted with is the lacquer square. It is not necessary to do it at all, but it significantly increases the period of wearing a manicure.

To make a lacquer square, you will need clear lacquer. The most common, not gel.

Lacquer square should be done after you shape the nail plate, remove the cuticle and clean the nails with a degreaser.

Just step back from the edges of the nail plate 2-3 millimeters on each side and paint over the inner area (that is, the middle of the nail plate) with clear varnish.

When it dries, you can proceed to cover the nails with a base coat.

Layer thickness

When creating a gel polish coating, each layer should have its own thickness.

There are three main tools, as we mentioned earlier. This:

    color coating

The features for each of them are:

    The base should be thin. Professional manicurists advise to collect the very drop of funds on the brush. A ball of gel, the size of half a match head, will suffice. It must be carefully distributed over the entire nail in a thin layer. A thick base will not adhere well to the nail and color coating. As a result, the manicure will simply peel off.

    It is followed by a color coating. It also needs to be applied in a very thin layer - otherwise it will not dry out. The drop size of the color coating is the same as for the base product. You apply the color in a thin layer, spread it over the entire nail plate. It is better to make several translucent layers, dry them thoroughly and get a bright, durable coating than to be upset because of an unsuccessful manicure.

    The base is applied as the last layer. And this layer should be denser than the previous ones. Since nothing is applied over the base, there is no need to worry about its adhesion. At this stage, it is more important for us to create a dense “shell” that will literally protect the nail from impact and friction. In addition, the volume layer of the top gives the manicure a beautiful glossy shine.

Edge sealing

In a manicure with gel polish, it is very important to seal the ends.

The end is the very tip of the free edge of the nail plate, with which you can rest against the pad of another finger. When you apply layers, they all end here.

Until the moment of sealing, the layers of funds look like sheets of paper folded on top of each other. They don't merge, they just stick to each other.

Sheets of paper can be folded into a folder. She will combine them into a single block.

The same thing happens when sealing layers. To do this, the top tool is slightly brought to the end of the nail. It kind of wraps around the edges of all previous layers, fastening them together.

Drying time in the lamp

But do not forget that the beauty of a manicure is not only complex effects. A beautiful coating is impossible without observing the correct technique for its creation and healthy nail plates.

Many women have long appreciated the durability, excellent decorative properties, wear duration and other important characteristics of shellac, in which ordinary nail polish is noticeably inferior. But only the correct application of layers of shellac on the nails, followed by drying the coating in a UV lamp, can ensure the incredible “survivability” of a luxurious manicure for several weeks. The technique of applying shellac to nails is so simple that you can easily master it at home with the help of video tutorials for beginners and a step-by-step master class with photos of each stage of the procedure.

The tandem of lacquer and gel in one bottle successfully replaces traditional nail extensions, as durable layers of shellac protect long, brittle nails from damage. Solid gel-varnish coating securely fixes the given shape of the natural plate and helps prevent its delamination.

The obvious advantages of using shellac include the possibility of performing a fashionable "salon" level manicure at home, a high polymerization rate (drying each layer of the coating), resistance to external influences (including household chemicals), maintaining the shine and intensity of manicure shades during socks, safe for natural plate removal of gel polish without sawing. And during a long vacation, shellac is simply irreplaceable, since a manicure made with it does not require correction and you can safely enjoy your vacation.

♦ COMMON MISTAKE

The use of low-quality gel polish for manicure or a violation of the technique of applying shellac to nails can lead to a rapid loss of glossy sheen, peeling of the coating, cracks and chips. Be sure to familiarize yourself with the typical mistakes that women make during the procedure, and carefully study the video tutorials for beginners on how to do a manicure using gel polish at home.

Incorrect storage.
Do not leave shellac bottles in an open place in direct sunlight, which changes the properties of the decorative material. Room lighting also shortens the shelf life of gel polish. Keep all bottles in a dark place and close them immediately after using gel polish;

The tips of the nails are uneven and rough.

When preparing the nail plates for applying shellac, very carefully grind the free edge with a suitable manicure file. If the tips of the nails are not smooth and even, then during the sealing of the end, lumps will begin to collect on them, which can lead to chipping of the hardened coating;

Cuticle treatment with emollient oil before the procedure.

Process the cuticle with protective and emollient agents after completing all stages of manicure. The oil creates a greasy layer, weakening the adhesion (adhesion) between the surface of the nail and the base layer;

Polishing of nails before the procedure.
Treatment of the surface of the nail plates with a polishing buff impairs adhesion. To improve adhesion between the plate and the coating, treat the surface of each nail with a suitable nail file with fine abrasive to get a roughness;

Using an acid primer.
If you use shellac to perform a manicure, then it is generally not necessary to treat your nails with any primer to improve adhesion. In any case, use only an acid-free primer and apply the base coat on the nails immediately, without waiting for the primer to dry completely;

Improper degreasing of nails.
Before applying the base layer, you must very carefully remove moisture and all fat from the nail plates. Treat the fingers with disinfectant foam, carefully wipe each nail with a lint-free cloth (you can moisten it with Nail Prep), and then apply a degreaser (fresher or instant drying dehydrator) to the nails and periungual ridges;

Shaking the bottle of gel polish.

Vigorous shaking of the bottle leads to the appearance of small bubbles, which complicate the procedure for applying shellac to the nails in an even layer. It is quite enough to slightly rotate the bottle in different directions to evenly distribute the pigment that has settled to the bottom;

Spreading of the base layer.
If you apply the base in a thick layer, then it will begin to spread, falling under the side rollers and on the cuticle during drying in a lamp. Try to apply the base in a thin layer and very carefully so as not to go with the brush on the cuticle and on the side rollers;

Thick base coat.
Colored shellac should be applied to the base in a very thin layer. Carefully squeeze the brush against the edge of the bottle before the procedure and move from the cuticle to the tip of the nail. During the polymerization process, a thick layer of gel polish hardens unevenly and waves and swelling may appear in some areas of the coating;

The end of the nail is not sealed in time.
Bring the brush over the edge of the nail when applying the base, top, and the first base coat of shellac. Please note that the entire end of the nail is completely sealed. Moisture will enter the layers of the coating through a poorly sealed tip of the nail and the shellac will begin to peel off;

Incorrect removal of the dispersion layer.
A sticky dispersion layer remains on the nails after polymerization of each coating layer in a UV lamp. But the sticky layer perfectly binds all layers of the coating and it needs to be removed only from the top layer (and not from each) with a clinser. By the way, it is best to apply the top (finish coat) with a separate brush and then dry this layer thoroughly in a UV lamp (1.5-2 minutes, depending on the lamp power) to achieve a spectacular glossy sheen;

Poor polymerization of the coating.
If at least one layer of the coating is uneven or not sufficiently dried in the lamp, then the decorative manicure will not adhere well to the nails. Place your fingers in the center of the device, do not press them against each other. Try to accurately observe the polymerization time. If the applied coating layers do not harden enough in the allotted period of time, then it's time to change the UV bulbs in the device.

♦ CORRECT APPLICATION OF SHELLAC ON THE NAILS AT HOME

Tools and materials:


UV lamp (36 watts; if LED, 18 watts is enough);

· A set for hygienic manicure (nippers or scissors with narrow cuticle blades, a pusher with a rounded spatula, nail files, orange sticks);

· Lint-free wipes;

· Brush for removal of dirt;

Base (to protect the nail from the active components of shellac);

Colored shellac (base coat);

Top (finish coat);

Degreaser (dehydrator, fresher);

· Klinser (for removal of a sticky layer from a finishing covering);

Emollient cuticle oil.


Step by step application of shellac on nails:

❶ Make a warm bath for nails and hold your fingers in it for 10 minutes. Wipe your hands dry and do a hygienic manicure (push back the cuticle and remove the keratinized skin with a remover or manicure trimmer, trim the nails and give the free edge of each nail the desired shape);

❷ We grind the surface of the nail plates with a nail file with a fine abrasive to remove the shine and make the nails more matte. This procedure improves the adhesion of the base coat to the surface of the nail;

❸ Carefully wipe the nails with a lint-free cloth moistened with a degreaser. After degreasing, try not to touch the surface of the nail plates with your fingertips;

❹ Now we apply a base coat with a thin layer on each nail of one hand, carefully squeezing the brush against the edge of the bottle before the procedure. The end of the free edge is completely sealed. If the base gets on the skin around the nails, then carefully remove it with a cotton swab dipped in nail polish remover;

❺ Place your fingers in the UV lamp, being careful not to touch the base coat on the body of the device. The polymerization time of the base layer depends on the power of the lamp (from 30 to 120 seconds);

❻ After polymerization, try not to touch the hardened coating, as a sticky dispersion layer remains on it (it is not necessary to remove it). Gently apply a thin layer of colored gel polish. During the procedure, you can seal the end, but not necessarily;

ALSO DISCOVER...

- this is a real manicure trend of our time. After all, such a coating keeps on the nails for 20 days or more, while maintaining brightness and not chipping. And the materials for such a super-resistant coating are quite affordable. But a paradox arises - there are a lot of people who want to work with gel polish, but, unfortunately, not every master adheres to the correct technology. But it is the observance of technology that guarantees the durability of manicure, satisfied customers and, as a result, good earnings!

So, how to apply gel polish correctly and why should you choose this particular coating?

The instruction has been updated and relevant in accordance with the new technologies of 2018!

Why gel polish? Photo-instruction for applying gel polish

Gel polish is a highly durable color coating. It remains on the nail plate for 14-21 days, and does not lose its luster and does not chip off. You can completely keep the gel polish on your nails even after 3 weeks, but the nail will grow back from the cuticle and become sloppy. The coating is not repaired, but re-created. Fortunately, this will only take up to 40 minutes of time.

See how to apply gel polish on a photo - and you will easily figure out how to create a flawless, colorful and long-lasting manicure.

Materials and tools for work

There is nothing super complicated in how to properly apply gel polish on nails if you properly organize your workplace in advance. We will need:

  • lamp for drying gel polish - can be UV or LED;
  • orange stick for cuticles;
  • lint-free wipes;
  • disinfectant liquid for processing tools and hands;
  • degreaser and dehydrator Nail Frasher;
  • base (or 12 ml), topcoat (7 ml or 12 ml);
  • color coating - Kodi gel polishproviding shine and brightness;
  • adhesive remover: Cleanser.

The use of gel polishes, primers, finishes and degreasers from Kodi guarantees the strength and aesthetics of a manicure. In addition, when using any shade from a diverse palette of Cody, you do not need to file off the nail plate - this is an atraumatic technology that preserves the health of your nails.

Application technology step by step

So, we have prepared the tools and materials - now we move on to how to apply gel polish on nails. Each stage of the technology is important, because the ideal result can only be obtained by following all the recommendations:

1. We prepare the nail plate. This can be as a classic manicure if necessary, or simply giving the nail plate the correct shape. To shape the nail, we use a drop file suitable for working with natural nails. Also be sure to bend the cuticle with an orange stick.

2. We carry out washed down the nail. Attention! The nail does not need to be filed - it only performs surface grinding to ensure better adhesion of the gel polish to the nail.

3. Disinfect the nail plate.

4. The nail plate is degreased and dried. To do this, we use Kodi's Nail Frasher, which acts as a degreaser and dehydrator at the same time. The tool removes dirt and grease, dries the nail plate and disappears very quickly - which means you can continue right there.

5. We cover the nails with an acid-free primer. On the surface of the nail, it turns into a “double-sided tape”. Naturally, you need to apply the primer very carefully so that the base does not “pull up”. The primer covers the entire nail, not reaching the lateral ridges and the cuticle by 0.5-1 mm.

6. We cover the nails with a base - a thin layer, rubbing movements. Be sure to process the ends. We dry the base in a UV lamp for 2 minutes, and in a LED lamp for 30 seconds.

7. Apply a thin layer of color coating, moving from top to bottom. Be sure to paint over the end part of the nail - this will avoid chipping when worn. Dry the first layer in the lamp, then apply the second and dry again.

8. We complete the procedure by applying the finishing layer. Finishing necessarily pass the end of the nail. Dry in a lamp.

9. The dispersion sticky layer is removed with a special tool - Cleanser. The use of special equipment guarantees the durability of the coating. If you ignore this point, the coating can quickly collapse.

10. Apply cuticle oil.

A little about the care of gel polish

Gel polish Cody retains its attractiveness for a long time, not being damaged by water and household chemicals. In the process of wearing such a coating, it is not recommended to cut and file nails, but you can remove the cuticle.

Most often, such a procedure can be done in beauty salons, or at home with a specialist. We will show you how to apply gel polish at home.

Currently, gel polish is very popular and when performing a manicure, the choice falls on it. This is due to the fact that the coating can stay on the nails for a long time, up to 2 weeks, and it also makes the nail plate noticeably stronger. Most often, such a procedure can be done in beauty salons, or at the home of a specialist, but today on the website we will show you how to apply the coating yourself at home. Our tips will help you understand the technology of using gel polishes for beginners.

Required Tools

The fact that manicures are most often performed by specialists is largely due to the fact that you need to have special tools to cover your nails with gel polish. But if you stock up on them for your own use, you can provide yourself with a beautiful manicure for a long time.

Must have:

  1. LED lamp or UV lamp- it is a mandatory attribute, since it is with the help of it that the gel polish solidifies. It affects the varnish with special ultraviolet radiation and is completely safe for health.
  2. Base- an indispensable tool that provides protection to the surface of the nails and better adhesion of colored varnish.
  3. top- Applied at the end, it provides a strengthening of the coating and prolongs the duration. The top is glossy and matte.
  4. Themselves gel polishes of various colors, according to your taste and color.
  5. Degreaser- a special tool that allows you to clean and degrease the surface of the plate, thereby ensuring its stronger adhesion to the varnish.
  6. Nail treatment tools: files, buffs, tweezers, tweezers, pusher, lint-free wipes (it is better to avoid using cotton pads, as they leave debris on the coating).
  7. Decor: sequins, nail stickers, rhinestones.
  8. For beginners, especially for self-use, for the first time it is better not to take very expensive products. It is better to buy at an average price and in small quantities, and next time choose based on experience.

Step-by-step application instructions

In order to perform a high-quality manicure and not forget anything, you need to properly prepare your workplace. First of all, free up enough space on the table, provide it with lighting and put all the necessary tools in front of you so that you don’t have to look for them in the process.

Before applying gel polish directly, you need to prepare your nails well:

  1. The remnants of the previous manicure are carefully removed, removing even the smallest points.
  2. Next, you need to do a regular manicure, cut off the burrs, remove the cuticle, correct the shape of the nail and file the edge from bumps.
  3. With a buff, you need to walk over the entire surface of the nail plate.
  4. Nails are degreased with a special tool.

After the preparation stage, you can proceed to cover the nails:


Video: step-by-step instructions from the manicure master

Removing the coating from the nail plate

When the nails have grown enough and the manicure does not look aesthetically pleasing, the coating must be removed from the nails. In order to properly remove it, it is not enough just to rub the nails with a cotton pad dipped in a special liquid. This is done in a slightly different way:

  1. With a nail file, you can walk along the upper glossy layer, sawing off a shiny surface, especially for the butt.
  2. Cotton pads need to be cut into 4 parts, apply a remover to each.
  3. Wetted pieces of discs are superimposed on each nail, and are well fixed on top with foil.
  4. After 10 - 15 minutes, the foil can be removed from the fingers, the varnish should swell on its own and peel off the nail. If a small amount remains, then it can be carefully removed with a wooden stick (pusher). Do not use metal tools for these purposes, otherwise the nail plate itself may be damaged.

If during removal the gel polish had time to harden in the air, then you need to repeat the procedure.

In order for the manicure to last as long as possible on the nails and look beautiful, you need to follow a few tips that will help you avoid mistakes:

  • before work, it is better not to do nail baths, less than two hours before manicure;
  • if there is not enough experience, then you should not work with all the nails at once, it is better to paint 1-2 nails in turn;
  • during the day it is better to avoid strong contact with water, especially when washing floors, visiting the pool;
  • do not apply a thick layer, remove excess product on the brush.

Manicure Ideas

When working, you can also give free rein to your imagination and make various patterns on your nails.

Some of the simplest nail design ideas that you can do yourself at home:

  1. Using Multiple Colors- now it has become fashionable when the nails are painted in different shades, when only one or even a combination of colors on one finger stands out. In addition, you can use a thin brush and use it to draw on the nails.
  2. Decoration with rhinestones or stones- a monochromatic or colored manicure can be decorated with various pebbles, in the same way, highlighting only one nail, or used on each finger. Jewelry must be applied to the last, still sticky layer of gel polish, you can use special glue, and then dry it in a lamp. And after that, fix with a layer of top.
  3. Loose sequins- with such a shiny powder you can decorate the entire surface of the nail, or apply a drawing with a thin brush until the varnish is dry, pour sparkles on it that will stick to it. And then fix the whole drawing with a top.
  4. Various pictures or shiny ribbons- the principle is the same, you need to place the sticker you like on the sticky top layer, and then apply the top and fasten it under the lamp.




















Video “Apply gel polish yourself”

Have you tried gel manicure yet? Be sure to share your experiences and ideas in the comments!