Booties with ruffle knitting without seams. How easy it is to knit adorable baby booties. Ideas and schemes for baby booties

Booties are considered one of the first types of shoes that future mothers knit for a baby. They are very practical: because of the soft sole, they do not injure the delicate foot of the baby and keep it warm. Today, there is a very large variety of booties: these are booties in the form of socks, boots, shoes or sneakers, sneakers or sandals with knitted straps. Also, booties can be made in the form of a lamb or a dog, berries or with lapels. You can decorate such shoes with anything: bows, beads, leaves, flowers, eyes. These are, of course, complex options for booties, but we will analyze easier options, such as, for example, booties without a seam with knitting needles. You can also knit on two knitting needles, but then you have to make that ugly seam that many craftswomen do not like. Let's start knitting!

We stock up on knitting needles

The process of making booties on 4 knitting needles can be traced on the example of a master class.

In order to make such booties, you need to stock up on knitting needles (in the amount of four pieces) and yarn.

Choose softer and lighter pastel colors of yarn. Bright colors most often contain harmful substances and will cause allergies in a child. Also pay attention to the composition of baby yarn. It should consist only of natural fibers: wool, cotton, in extreme cases, acrylic. This master class is suitable for both beginners and experienced craftswomen.

It is necessary to start knitting from the foot: we collect seven loops and we knit the first line from the front loops. We will knit with a shawl stitch. In order to make a foot extension, in even rows, it is necessary to double crochet three times after the first and before the last loop. If we double crochet in the wrong side, then the next step is to knit the front crossed.

Make sure that holes do not form during the knitting process. Those 13 loops that turned out after the increase, we knit another twenty-six rows. Then once we make an increase on the sides and continue to knit. As a result, we should get forty-six rows. In order to shape the sole, we knit two loops together on both sides of the product. There should be seven loops left to cast off.

The next step will be to make a rise and go to work with four spokes. To do this, we need to choose the amount from the edge side and closed loops so that there are 12 loops on the part where the toe is located, and on the sides - a paired amount.

After we have knitted the product, you can proceed to decorate it. To do this, put into work a contrasting thread (so that it is noticeable that this is an ornament) and knit one row. And in the next line, alternate two facial loops together and one crochet. After that, we tie two more rows with facial loops and replace the thread with the main color. Start forming the skin (cloves): while knitting a new row, it is necessary to grab the main thread with each loop that we worked with before we started knitting the border.

If you are just a beginner and do not know how to do this, then we suggest that you sew a border with a needle very simply. After that, we need to knit nine more rows in a circle in garter stitch.

Now we go back to the toe, to those 12 loops that were left. The toe must be knitted in the same way as the heel, namely, on each side we add one loop from adjacent knitting needles, and then we knit two loops together. We work until forty-two loops remain on all the knitting needles.

We work with the lower leg: we knit thirty to thirty-six rows with a garter stitch or an elastic band. Experienced craftswomen can knit with a rice pattern, or you can also enter a contrasting thread and make a couple of stripes.

Well, the last step is to decorate seamless loops on 4 knitting needles for beginners. You can sew on a beautiful button or make pom-poms on the sides. You can also decorate the muzzle of the little animal or crochet a beautiful fold. There are many patterns, it all depends on your imagination and skill.

And also you can see other patterns of seamless booties.

There are many different models of booties for newborns with diagrams and descriptions. The most successful of them are worthy of embodiment for newborn boys and girls. Consider step by step several options for beginners and more experienced craftswomen.

Selection of yarn for booties

Before you get started, it is important to choose yarn and tools. For it is worth paying special attention to the composition and tactile sensations from the threads. To work on booties, you need to choose a yarn of medium thickness. The footage should be about 200-300 meters per 100 g of yarn.

Composition options are:

Cotton. Natural thread with pleasant tactile qualities. A product made of such threads can be put on a baby on a bare foot. But they won't keep you warm in the cold. From cotton, you can knit summer shoes for babies.
Wool or semi-wool. From such threads you will get warm socks or boots for the baby. But they should not be worn on a bare foot, as wool can cause irritation. From wool, you can knit winter booties for newborns.
Acrylic. Today, many yarn manufacturers offer a special series of children's synthetic threads. Acrylic is quite soft and moderately retains heat. Such a product can be put on a child on a bare foot or on a toe. Acrylic products do not lose their original appearance for a long time, do not roll, do not deform.
Wool mixture, any mixed thread has pleasant tactile qualities and is quite warm. In addition, such threads are wear-resistant, thanks to the acrylic included in the composition.
The manufacturer can be chosen according to your taste. More expensive brands of yarn offer high quality threads, soft, hypoallergenic.

Knitting needles for knitting booties for newborns should be selected according to the thickness of the yarn and knitting features. Booties can be knitted on 2 or 4 knitting needles. Schemes and descriptions of these methods are given below.

Knitted booties socks

Booties in the classical sense are small knitted shoes for newborns or infants. Today, craftswomen have developed and described a large number of different models of this accessory. It can be knitted sandals, sneakers, boots or other fancy types of knitted shoes for babies. Very popular, functional and easy-to-carry socks booties, which are possible for newborns, the scheme and description are presented below.

This model is knitted according to the classic version. The upper part of the bootie imitates a sock. Usually it is performed with a 2 by 2 elastic band with a collar.

Materials:

Any yarn - 100 g.
Hosiery straight knitting needles of a suitable number - 4 pieces.

Used types of knitting:

Stocking knitting (all rows are facial).
Rubber band 2 on 2.

Stages of work:

You need to start with the sole. Dial 36 loops on the knitting needles in any convenient way.
Knit the first 2 rows.
For increments, you need to place markers. One marker on the left and right, stepping back 2 loops. Side parts of 15 loops. Highlight the middle 2 loops with markers.
Knit the next row, inc before the first and second marker, then knit 2 middle loops, increase after the third marker, knit 15 loops and increase after the last marker. Remove markers.
Knit the next row with facial loops without increments.
The additions on the sole alternate. 1 row without increase, and 1 with increase. Increases in each row increase by 1 loop. The side parts will always be 15 loops, the middle loops increase.
So you need to knit until there are 10 loops in the center, and 6 loops are added on the sides.
The markup is as follows: extreme 6 loops, marker, 15 side loops, marker, 10 middle loops, marker, side 15 loops, marker, extreme 6 loops.
After we knit another 9 rows with facial loops without increments. This is the top of the booties.
Now you need to put markers for the toe. On the left and on the right, you need to set aside 14 loops. The middle part is 12 loops. Between the middle and side parts - 8 loops and 8 loops on the other side of the center.
Now you need to make reductions to form a sock. You need to decrease the loops of the central part between the middle markers, knitting 2 loops together at each central marker.
So knit with decreases until there are 4 loops left in front of the extreme markers on the inside.
The sock is tied, you can change the thread to a different color.
First we knit the central part between the markers with yarn of a different color, reducing the remaining 4 loops at each marker
You need to continue knitting in a circle, distributing all the work on 3 knitting needles. You need to knit with facial loops, stitch 2 rows. Stop at the toe.
Knit rib 2 by 2 to the desired height. Approximately 22 rows.
Close loops.
The bottom of the booties needs to be sewn.

It is necessary to raise the side loops of the booties along the edge at the place where the color of the threads changes, not reaching 4 loops to the toe.
Cast on 12 sts on the third needle.
Start with stitches on a new needle and knit in the round for 8 rows. Close loops.
Sew on the edge of the strap and decorate with a button.

For a more illustrative example, you can watch a video with a master class on booties-socks.

Master class on knitting booties without a seam

It is very important that it is comfortable for the baby and does not rub the leg. Therefore, booties can be knitted in a seamless way according to the following scheme and description.

For work you need:

Yarn - 100 g.
Knitting needles - 5 pieces, straight.

First, the sole is knitted on two knitting needles. Cast on 8 stitches on the needles. Next, do this:

Knit the first row.
Knit the second row only 1 and purl the last loop.
In the third row, at the beginning and at the end of the row, you need to add 1 loop. Through the row, add more loops along the edges of the row.
Knit for the length of the sole with facial loops.
In the penultimate row, decrease the cast-on loops and finish the original 8 loops.
Now you need to pick up the loops along the edges of the sole and go to circular knitting on 5 knitting needles. It is necessary to distribute the loops as follows: 10 loops of the toe on 1 knitting needle, the same number of loops for the side parts and 10 loops for the heel.
Now the rise is knitted in a circle for 10 rows with an elastic band 1 by 1.
Now you need to knit a sock. To do this, on the front of 10 loops, you need to make decreases, knitting only the front loops in straight and reverse rows, do not knit the heel.
After you need to go back to circular knitting and knit the upper part of the booties with any pattern.

Such a model is obtained without tearing off the thread and without a seam. This pattern is very easy to make and perfect for beginner knitters.

Do you know how to knit?
Vote

Knitting booties for beginners

A simple and versatile model of booties, which is described below, is suitable for beginner craftswomen. Work begins from above on 5 knitting needles in circular knitting. Patterns used: garter stitch, front surface and 1 on 1 elastic.

On the knitting needles you need to dial 37 loops and close in a circle, knitting the extreme loops together. In the circle you should get 36 loops, 9 on each knitting needle.
Knit 12 rows in 1 x 1 Rib.
Completes the upper part of the booties with holes for threading the lace. Knit it alternating 2 stitches together, knit 1, yarn over.
Now work front 11 sts in garter st for 18 rows. This is a toe.

On the sides of the toe, pick up 9 loops and knit on all 4 knitting needles in a circle with a garter stitch for 10 rows.

Next, knit the sole from the front 11 loops, in each row, capturing 1 loop from the side knitting needles.
Knit heel and sole loops 2 together.

It remains only to decorate the booties, thread the lace or braid.

According to these diagrams and descriptions, you can make excellent knitted shoes for a newborn boy or girl with your own hands.

Video tutorials will be a good help for beginners, as they show in detail how to knit decreases or increase, where to put markers and change the direction of work, other little things that are obvious to an experienced master, but incomprehensible to a beginner. But with such lessons, you can safely start any model of booties you like with knitting needles for newborns.

Knitted booties for girls

Knitted summer booties for newborn princesses can be knitted according to the following description. You need to prepare for work:

Threads in two shades. In the master class, these are pink and white. It is better to take cotton, as this model is for summer.
Needle set of 5 pieces.
Beads and a narrow ribbon for decoration.

Work on these sandals for girls must begin with the sole:

It is advisable to draw a pattern on a piece of paper in a cage, where each cell corresponds to 1 loop of 1 row.
According to the pattern, you need to tie the sole with the first color of the thread.
On the edge of the sole, you need to pick up the loops and distribute them on 3 knitting needles. There are 60 sts on the sample: 21 sts on each side and 18 sts on the toe.
Knit 1 row with the second light.
Work 14 rows in 2-color ribbing. Here a patent gum is knitted with alternating threads. Facial loops - pink, purl - white.
Next, switch to garter stitch and alternate colors in each row. Knit 4 rows.
Bind off all sts, leave 20 heel sts on needle.
Knit in stocking st for 8 rows, pick up 20 more sts and work 8 more rows in stocking st to form a strap.

It remains to decorate the booties knitted with embroidery, ribbons or beads.

Knitted booties for newborn boys

For boys, you can knit booties in the shape of a typewriter. For work, you need to choose threads of bright colors in two basic shades and black and yellow for finishing.

Knitting needles need to be taken thin.

Getting Started:

Cast on 48 stitches.

Knit two rows without changing the facial ones.

Do the third row like this: hem, yarn over, knit 22 loops, yarn over, 2 yarn over, 22 yarn over, hem.
Fourth row: facial unchanged.
Fifth row: hem, 1 p., yarn over, 22 p., yarn over, 4 p. yarn over, 22 p., yarn over, 1 p., hem.
The sixth row of facial unchanged.
Seventh row: hem, 2 sts, yarn over, 22 sts, yarn over, 6 sts, yarn over, 22 sts, yarn over, 2 sts, hem.
The eighth row of facial unchanged.
Row 9: hem, 3 sts, yarn over, 22 sts, yarn over, 8 sts, yarn over, 22 sts, yarn over, 3 sts, hem.
Knit next 2 rows with base color.

Change color to white and knit 2 rows.
Change the thread, return to the main color. Knit 6 rows.

Form a nose. Divide the loops into 10, 22, 10, 22. Decrease from the front side, knitting 2 together from the wrong side, from the wrong side - 2 together from the front. Until there are 15 loops left on the sides.

Knit from the inside the first 14 loops.
Attach a white thread and knit 12 loops, unfold. Knit back and forth 8 rows.

Knit 2 more rows, capturing the loops of the main color at the beginning and at the end of the row.

Preparing for the birth of a child for a mother often becomes a period of creativity and the discovery of hidden talents. Someone begins to get involved in sewing future clothes for the baby, and someone knits wonderful children's things. Booties are one of the cutest and most touching items in a baby's wardrobe.

Types of baby booties for boys and girls

The first shoes of newborn boys and girls can be classified based on their similarity with adult shoes. Among them are:

But this is not the whole list of possible types of booties. There can be many criteria for their separation:

by color (pink for girls, blue for boys and universal colors);
according to the seasons (dense for cold weather, openwork for the summer season, etc.);
in appearance ("bunnies", "berries", "flowers", "dogs", "sheep").

Which of the options for the execution of baby booties will be chosen depends on the desire, mood and creative abilities of the craftswoman.

Baby booties knitting guide

Any creative work requires some preparation. It is very important that everything you need is at hand, and that all the initial data is obtained.

For knitting small children's shoes - booties you will need:

knitting needles, which must correspond to the thickness of the selected yarn;
yarn for knitting the required colors and the right amount;
a needle with a large eye, with which parts of the product will be sewn together;
decorative elements (beads, satin ribbons, buttons, ribbons, etc.);
knitting markers for some types of booties.

Also, it is very important to decide on the size of future booties. To do this, you first need to decide in what period of time, in what season and in what weather conditions they will be used.

Based on this, the age of the baby and the size of his legs will be clear. This is very important, because in the first year of life, children grow very quickly. Booties knitted exclusively for a newborn may no longer fit in size at 3 or 4 months of age.

You can, of course, knit booties with some margin in size. However, it is much more pleasant if they sit on a tiny leg like a glove.

It is difficult when the knitting process itself takes place when the child is still in the mother's tummy, or the booties are made as a gift. For such situations, there are average sizes:

for a newborn, the size of the legs is about 7-9 centimeters;
from three months to six months - about 9-10 centimeters;
six to eight months use data - 11 cm;
from eight months to ten - 12 cm;
from ten months until the baby reaches the age of one year - 13 cm.

This data should help in determining the required size of booties and the correct calculation of the loops.

Step-by-step instructions for knitting booties for beginners with diagrams and photos

How to knit booties with knitting needles? Do not despair if you have little knitting skills and experience. For every skill level, you can find the model of booties that is sure to turn out great.

Knitted shoes with complex patterns or an original design solution can also be born from beginners. But it’s better, after all, to begin with, to try to connect a simpler option, for example, this one.

Consider a description of the process step by step with a photo. Knitting begins with the sole according to the proposed pattern in garter stitch.

Then, we take 4 knitting needles and we collect loops on them from the foot in this way:

booties on the toe - 10 pcs.;
on the sides - 20 pcs.;
on the heel - 7 pcs.

It is necessary to knit eight rows on 5 knitting needles with a “front surface” pattern.

Now we begin to make decreases: we connect two loops together at the meeting points of the “toe” and side knitting needles. For 2 rows, only 4 loops are reduced.

After, we use only the knitting needle for the toe of our booties and make decreases: we take 1 side loop and 1 toe loop and knit together. Knitting is turned over and repeated. Decrease should be done until the following number of loops:

toe - 10 pcs.;
sidewalls - 7 and 8 pieces;
heel - 7 pcs.

At the end, we use the “single gum” pattern and knit it on five knitting needles for 20 rows. Then we close the loops, break the thread.

According to the proposed scheme, we knit dog ears and sew to the main product. We make the dog's nose and eyes.

By this principle, you can knit rabbits, and kittens, and other unknown animals. If you try, you can collect a whole collection of animals.

The simplest method of knitting booties without a seam with knitting needles - description and photo

Unusual booties can be created with knitting needles without a single seam. They turn out to be very beautiful and cozy, since nothing from the inside will create discomfort for the baby’s leg. Seamless knitted shoes in this case are perfect for children who are just starting to walk. Therefore, this lesson will consider knitting booties for a child from 10 to 12 months old.

In order to make booties in a seamless technique, you will need:

five knitting needles, the size of which must correspond to the thickness of the selected threads;
yarn (preferably acrylic) - 50 gr.

So, how easy is it to knit booties without a seam with knitting needles? Knitting begins with the cuff of the booties. So, we initially collect 37 loops on the knitting needles. Then we distribute them in the same amount on four knitting needles.

Thus, you should get a neat little square. We knit the very first of the rows with facial loops to connect everything in a circle. To do this, you need to knit two extreme loops together.

Next, 12 rows need to be knitted with a single elastic band. To make our booties look beautiful, you can try to knit peculiar holes, into which a ribbon, ribbon or decorative lace is then inserted.

To make them, a rapport is knitted (a repeating part of a pattern, a pattern): two facial loops are knitted together and a single crochet. After that, we go around the cuff in two rows of the front surface in the following order to distribute the loops on the knitting needles as follows:

the first - 11 loops (the junction in a circle);
the second - 7 loops;
the third - 11 loops;
fourth - 7 pieces.

Let's move on to the toe booties. We will need a third knitting needle with 11 loops. Without affecting the other three knitting needles, we knit 18 reverse rows using the "garter stitch" technique.

We are transgressing to the birth of the "side". For this, the edge loops of the toe will be used and the previously left section will be put into operation. We collect one loop on the hem and knit ten rows using the “garter” knitting technique.

The next part is the sole of the booties, which connects to the "side". It is knitted in stockinette stitch. This process looks like this: we knit 11 loops in the middle; the extreme is knitted together with the "side" by means of two loops together. When there are no more loops left on the side needles, knitting in this way ends.

When all loops have been thrown over, knitting must be "closed" by knitting three loops together. We make a closure: the first loop will be closing, we take the second from the first knitting needle, and the third from the second.

In the very last loop we stretch and tighten the thread, hiding it in a convenient way.

You can decorate ready-made booties with a contrasting ribbon with a bow for a girl, or with a bright decorative lace on a symbolic knot for a boy.

An easy way to knit openwork booties with knitting needles (photo attached)

Openwork booties look very impressive. Perfect for warm weather. In them, the baby's leg will "breathe" due to the free circulation of air through the "holes" in the openwork pattern.

Initially, it may seem that they are difficult to knit. However, this is not the case at all. These cute booties for a baby from birth to three months can be created in one free evening without much work and effort. It is worth believing that this is a very interesting and exciting activity that can drag on for a long time.

Let's try to knit such cute openwork shoes.

We start knitting with the soles of the booties. We make a set of loops on the knitting needles in the amount of 31 pcs. Carefully knit garter stitch 15 rows. Do not forget to make an increase for the soles of future booties. They will be in the odd rows of our knitting.

Increases should be placed one loop at the beginning and at the end of the row. And also, on both sides of the 16th loop in the row. We do such additions of loops until 63 loops are located on the knitting needle. After that, we continue to knit 7 rows with the same garter stitch, but there is no need to add loops.

From the next row, knitting of an openwork pattern begins according to the principle

first row - all facial loops;
second row - all purl;
third row - 2 front loops together + yarn over;
fourth row - purl loops.

The first row of openwork stripes looks like this:

on the front side of the product you need to knit 36 facial loops;
loops that are 37 and 38 must be knitted together;
we turn the work;
10 loops knit purl;
We knit the 11th and 12th loop together with the wrong side;
the next row is directly openwork strips (nakid and 2 loops together).

You need to be very careful not to get lost because of the crochets. It is worth remembering that 10 loops must be located in the center. We knit the 11th and 12th together. Openwork stripes should be repeated through three rows in the fourth.

We knit in this pattern until 14 loops remain on both sides. After that, we knit side loops (14 pcs.) And middle ones (10 pcs.). You should get 24 rows of openwork stripes looking up. We close the loops.

The next step is the assembly of the product. You need to sew the top, back and sole.

Following this simple scheme, you get beautiful “openwork boots” booties - fashionable and stylish. Using different colors and their combinations, each new pair of these booties will look completely different than the previous one.

Stylish booties-sneakers for a newborn: a master class with a photo

From birth, the baby should be instilled with a sense of beauty. This applies to the choice of clothes and shoes too. Small knitted booties in the form of sports shoes will make your child visible and bright during a walk in the fresh air.

It is not very difficult to knit such stylish shoes for the crumbs. The main thing is to choose and distribute the colors of the yarn correctly so that you get a pattern that resembles adult sneakers.

To knit such booties-sneakers for the age from 0 to 3 months (for a newborn), you will need the following:

White, red and blue yarn in the amount of 100 gr.;
Five knitting needles No. 3.5;
sewing needle;
Hook;
Knitting marker.

It is very convenient that the entire product will be knitted with a garter stitch.

So, we collect 38 loops on the knitting needles and we knit the very first row only with facial loops. Take a knitting marker and set it in the middle of knitting.

We begin to add loops: 2 loops on each side of knitting in every 2nd row. In addition, the increase must be done in the middle according to the scheme:

edge loop;
one crochet;
17 facial loops;
again one crochet;
we knit two facial;
again one crochet;
17 facial loops;
one crochet;
edge loop.

In the next row we knit 19 loops, in the next 21 and so on. As a result, you need to reach 54 loops (we count together with the edge loops). The result should be the bottom of the sole of chic booties.

We turn to knitting the lateral part of the sole. It is necessary to knit the front row with purl loops and vice versa. This technique is necessary to give the booties a shape. As for the height, her needlewoman chooses it according to her desire.

We continue to knit to the established marker with facial loops. Next, we move on to the formation of the sock. To do this, you need to knit in short rows - two loops before the marker and the same number after it. Then we begin to add at the end of each row one loop. You need to reach 12 loops.

We knit like this without adding (increase). We connect the 12th loop with the side. In this technique, we knit 6 rows of white (light) yarn, and the other three with blue.

We continue to knit with blue threads to the required length, and then the part needs to be tied.

We proceed to the sides of our knitted sneakers. We knit all the loops and make an increase in the amount of 4 loops towards the toe of the product in each row.

So, 38 loops should remain. We knit four rows that visually look like two. We begin to gently reduce. This must be done every time in the second row at the very beginning and at the end.

In the same place, it is necessary to make decorative holes for the laces. To make them beautiful, it is worth knitting them like this: tie two loops together and make one crochet. We hem the sole of the resulting sneakers, and tie the side part.

You can crochet a small lace or buy a ready-made one. Insert it into the holes prepared in advance and tighten it nicely.

Such simple sneakers-booties can be knitted even by a beginner. Everything is quite simple and clear.

Baby booties on 2 knitting needles for beginners

On two knitting needles, you can knit a large number of the most incredible booties in design. At the end, they can be decorated with various decorative elements:

pom-poms;
beads;
Ribbons;
Braid;
Buttons;
Embroidery, etc.

To work, you will need 2 knitting needles and 50 grams of yarn of your choice of color, a needle for stitching parts.

Consider in detail how to knit baby booties on 2 knitting needles. We collect 39 loops on 2 knitting needles in the classical way. We take out one knitting needle and start knitting. You can choose the pattern "gum". With him, booties will fit the baby's leg well. As an option - garter knitting. This pattern looks great too.

We begin to knit the cuffs of future booties of the required height. The path will be, in our case, 18 rows and we make holes for a lace or ribbon so that the booties do not fall off the legs and hold firmly with the active movements of the crumbs. We knit the purl row.

Now you need to divide the resulting knitting into 3 equal parts of 13 loops and knit the first of them, and then set aside. Now we take the middle 13 loops and knit the part to the desired length, which depends on the chosen size, for example, 14 rows for a leg size of 8 cm.

Without tearing off the thread in the process of knitting, we begin to raise the loops on the right with the knitting needle on which the pending loops are located. So, we knit the middle loops with the same knitting needle and raise exactly the same number of loops as on the right side. We knit them all and still pending loops.

We begin to knit the side of the booties. To do this, use all the loops.

We pass to the sole of our product. Again, you have to share. We take knitting and divide it like this: 13 middle loops, 13 more loops along with those that were raised on the sides of the middle part (details). You should get 21 loops (right and left). We knit 21 loops on the left (wrong side row) and set aside.

We knit the loops of our sole like this: at the end of each row, we need to knit together the last loop, taken from the middle ones, and the first of the postponed ones. So it is necessary to continue until 6 pending loops remain on the first and second knitting needles.

The needle is put into work. With its help, remove the remaining loops and fasten them.

Now the product must be sewn at the back and turned inside out. Decorate with decorative elements.

In the work, you can use different patterns in combination or use only one.

In order for the result of the finished booties to please the eye, and for them to retain their cute original appearance for a longer time, a few tips should be given:

It is worth choosing the exact size of booties. To do this, you need to measure the baby's foot from the heel to the big toe. Based on this, correctly calculate the set of loops on the knitting needles.
Do not choose too thick threads. The product will look rough. But if this was planned in advance, then you can also try to make beautiful booties from bulk yarn.
Knitting needles must be selected according to the thickness of the yarn. Usually, recommendations for their size are indicated on the labels for the hanks.
It is not recommended to use poorly sewn small details on booties. The kid can easily tear them off and swallow them.
Don't be in a hurry. Handmade things look good when they are made slowly, with love and due diligence.
You can use a crochet hook to add extra lace details and details to the booties.

Knitting booties on knitting needles is quite simple. Choose the version of children's shoes that you like best and knit for your pleasure. Maybe, thanks to your imagination, you will come up with new versions of baby booties!

The next video shows another option for knitting booties.

Booties without seams with knitting needles: how to knit them correctly according to the pattern

Booties are one of the first types of clothes that moms knit for their babies. There are a great many types of booties today: in the form of socks or boots, sneakers or shoes, sneakers or sandals with knitted "strap".
They come with and without lapels, they can look like berries or various animals, complemented by knitted flowers, leaves, buds, ears, eyes, ruffles, laces. There are simpler models - for beginners, there are more complex ones, for experienced craftswomen. According to the method of execution, booties are distinguished with a seam and seamless. The first option is knitted on two knitting needles, the second - on four.

What are the advantages of seamless booties

That's right, seamless booties knitted on four knitting needles have their undoubted advantages, which novice knitters may not be aware of:

while wearing, the places of the seams do not rub the delicate skin of the child;
in models for older children who are already stomping around the house themselves, the seams will not press and interfere with movement;
in the process of knitting, you don’t need to worry that the seam will turn out to be sloppy, because for beginners there is a high risk of stretching the work a little during stitching or, conversely, sitting down - the knitted fabric has such an unpleasant feature - it does not hold its shape as clearly as the warp threads at the fabric. Then the booties will turn out a little skewed or pulled together at the seam. Therefore, for beginners, without experience in sewing knitted fabrics, it is better to master the seamless options first (although at first they may seem more complicated);
in the process of wearing, mommy does not need to worry that the seam threads will bloom, because seamless models do not have it.

Note! If you, as a novice craftswoman, after these arguments decide to knit
, without doing this before, remember that such things do not have purl rows - the process goes in a circle. Some inconvenience can be caused just by the absence of the usual mechanism: turning the product after each row, and the presence of four knitting needles in the work. You will get used to this feature quickly enough, there should not be any special difficulties during work.

Video: Baby booties

Where to start knitting? There are not many options here, as they say: either from the sole or from the lower leg. For beginners, it is better to choose the first option, since it allows you to move to four knitting needles gradually: the sole is knitted in the usual way for them - the set comes with two knitting needles. And only after that the work continues on four.

We knit booties on four knitting needles

Beginning of knitting We knit from the foot. To begin with, we will cast on 7 loops (including 2 edge loops) and knit 1 person. R. - Knit in garter stitch. Further, to expand the foot three times in even rows after the first and before the last pet. we make a crochet, which in out. R. we knit faces. crossed so that holes do not form. The resulting 13 pet. knit another 26 p. Next, from the sides, you need to make one more increase and bring the number of r. up to 46. To give the sole a shape further on both sides in the facial p. we knit 2 sts together until 7 sts remain. Close them.

Rise: we go out on four knitting needles Now we need to choose new ones from the edge side chains and closed loops so that there are 12 loops on the front part, where the toe will be formed, and an even number on the rest.

We decorate the booties with a scalloped border Since this is an ornament, it is better to introduce a contrasting thread into the work. We knit 1 row for her, in the next row we alternate 2 faces together. and 1 yarn. Then we knit two more circles with facial ones and change the thread to the main one. Now we will form the teeth. To do this, when knitting the next row, grab with each loop the main thread that was knitted before the start of knitting the border.

For beginners, this may seem complicated. Then you can just sew the border with a needle. We continue - another 9 circles of shawl.
The toe looks like a heel. We must go to 12 p. for the toe. We knit a toe according to the principle of the heel: only this part will be in the work, on each side we will add one stitch to it from neighboring knitting needles and knit 2 together (the wrong side appears here, we knit it from the wrong side), while on four knitting needles 42 loops will not remain (of which 12 are toes).

Shank Next, we knit the shaft of our seamless booties. It can be done both in garter stitch and in ribbing, or, for example, in a rice pattern. It is necessary to knit 30-36 circles. Here you can again introduce a contrasting thread, making it a couple of stripes so that it is in harmony with our border.

Next, we make seamless booties knitted on four knitting needles, this process depends on your taste and skills. For beginners, it will be enough to sew on a beautiful button or pom-poms from the sides, more experienced craftswomen can think of something like ears, eyes, noses - you get a funny face, crochet a rose, or come up with something else, or find ideas on the net.

Video: Lesson on knitting seamless booties

Schemes of baby booties

Comments

We knit marshmallow booties according to the scheme and photo with a description
Knitting booties: a step-by-step master class (photo, video lesson)

Booties are a kind of shoe-socks sewn from fabric, leather or knitted from yarn, which are designed for children under the age of one year.

The main purpose of such shoes is to keep children's feet warm, and, of course, in beauty.

Booties always have a soft sole - it does not cause discomfort to a child whose feet are not yet strong. They become the first shoes for newborn babies - they are not yet shoes, but they are no longer socks.

With the help of booties, the baby, who has already begun to crawl and sit, gradually gets used to walking and wearing shoes.

How to choose the right yarn for baby booties?

When choosing yarn for booties, you should pay attention to those varieties that were originally designed for knitting children's products.

Such yarn is hypoallergenic, undergoes stricter safety and quality control during production, and is also marked with a special mark by the manufacturer.

How to understand that the yarn is intended for children? Most often, this is indicated by the name: “Baby”, “Baby”, “Fidget”, in foreign brands in the name of the yarn you can see the word “baby”.

Basic requirements for baby yarn

If it was not possible to find such threads, yarn for booties should be selected according to the following criteria:

naturalness

Threads should predominantly consist of natural fibers, such as wool or cotton. In extreme cases, you can take acrylic. Remember that synthetic yarns can block air circulation and become electrified.

Booties, knitted from natural threads, will easily absorb moisture and allow children's legs to breathe.

However, when working with natural yarn, it must be taken into account that after the first wash, the knitted product will decrease slightly in size, so baby booties should be a little big on the leg.

Color

Do not choose yarn that is too bright, poisonous shades. When wearing such shoes, there will be a risk that particles of the dyes used will be released, having a negative effect on the delicate baby skin.

However, there is no need to go from one extreme to another, dressing the child exclusively in white knitted socks.

Modern stores offer a huge selection of pastel-colored yarn, and psychologists recommend paying attention to shades of yellow, green or orange, since these are the colors that young children love the most.

Thread thickness

The thickness of the yarn should be selected based on the season of wearing booties. However, even in winter, you should not choose too coarse and thick threads that can damage the baby's sensitive skin.

How to determine the size of future booties?

In order to take measurements from the baby's legs, you should take a sheet of paper. Stepping back from one of the edges of the sheet two or three centimeters, it is necessary to draw a straight line.

You need to attach a child's heel to the resulting line and mark on the sheet with a line the place where the baby's thumb ends. In order for the measurement to be complete, it is also necessary to note the widest place of the foot.

To the resulting width and length, so that the booties fit freely, add 1.5 centimeters.

On average, in a newborn child up to three months, the length of the foot is 9 centimeters, in crumbs from three to six months - 10 centimeters, and in a baby from six months to nine - 11.5 centimeters.

For knitting, you will need from 55 to 75 meters of yarn and knitting needles number 2-4.5 (we select them depending on the thickness of the yarn, the thicker the threads, the thicker the knitting needles).

We knit simple booties on 2 knitting needles: instructions for beginners

Knitting booties with knitting needles is not difficult at all. We offer the simplest master class for beginners on making warm lapel shoes, which, if desired, can be decorated with uggs or even children's sneakers.

For knitting you will need to prepare:

half-woolen, woolen or acrylic yarn;
two knitting needles number 2 (or number 3).

Knitting begins with the sole. The initial number of loops that will be cast on depends on the size of the baby's foot.

Thus, if you decide to knit shoes for a newborn or for a two-three-month-old baby, you need to dial thirty-five loops on the knitting needles, two of which will be hem. (If your child is older, the initial number of loops will need to be increased).

The further scheme of work is as follows:

The first row is knitted completely facial. The first loop is removed, and the last is knitted with the front.
Second row: the 1st edge loop is simply removed and yarn over. 15 loops knit facial, yarn over, three facial and yarn over, fifteen facial and yarn over, after which the hem is knitted. There should be thirty-nine loops in total.
3rd row is knitted.
Fourth row: the first edge loop is removed, after which the yarn over is made and 16 loops are knitted, then the yarn over and 5 loops are facial, again the yarn and 16 loops are facial, yarn over. The row ends with an edge loop. There should be 43 loops in total.
In the fifth row, all loops are knitted.
Sixth row: the first loop is removed and yarn over. Next, 17 loops are knitted with facial loops, a crochet is made. Then knit seven and yarn over, knit seventeen and yarn over again. The row ends with an edge loop. Upon completion, you should get 47 loops.
In the seventh row, all loops are knitted.
Eighth: edge, then yarn over and knit 18, yarn over and knit nine, yarn over and edge. The result should be fifty-one loops.
The ninth row begins with the removal of the edge loop. Twenty-five are knitted, yarn over is made and 26 more are knitted. A wedge is tied for rounding.

Next, we knit the rise from the tenth to the twentieth row, it must be knitted with facial ones. The edging is knitted as usual (see point 1).
To tie the upper part, it is necessary to divide all available parts into three parts: along the 21st loop on the sides and ten in the center.

The twenty-first row is knitted from the edge loop, followed by 29 front, then two are knitted together with the front. After that, the knitting is turned over.

The twenty-second row begins with the removal of the first loop behind the back wall, then 8 are knitted on the wrong side, and then two together - together on the wrong side. Turn.

The 23rd row begins with removing the loop behind the front wall, then eight front ones go, two loops are knitted together with the front. The item is rotated again.
The 24th row begins with removing the loop behind the back wall, eight purl, after which two purl are knitted together. To knit the 25th - 36th row, it is necessary to alternate the 23rd and 24th rows in shifts.

The 37th row begins with the removal of the first loop behind the front wall, then nine are knitted, the next twelve are again facial and, at the end, edge. In total, after knitting 37 rows, 36 loops should remain.

Next, an elastic band is knitted. The 38th row is knitted with the front ones (except for the hem ones), and from the 39th to the 58th row an elastic band is knitted: the front and back 1 * 1 alternate.
The final stage is the closing of the loops.

Then, along the back wall, the resulting bootie is sewn together, and the elastic is tucked out.

The second bootie is knitted according to the same pattern.

Warm shoes for a newborn baby are ready!

How, based on the above master class, you can knit impromptu sneakers, the following video will tell in detail:

Marshmallow booties: a step-by-step master class

Marshmallow booties can be called one of the most attractive varieties of knitted children's shoes. They owe their name to the well-known sweets - marshmallows, which they look very similar to.

In order to knit "marshmallows" you will need yarn of 2 colors and two knitting needles with a diameter of 2.5 mm.

We perform the following steps step by step:

On the knitting needles, you need to dial twenty-five loops from the yarn of the main color (our main color will be blue).

Next, a fabric 15 centimeters long is knitted using the garter stitch method, after which ten loops are closed.

Then you need to take the threads of an additional (in our case, yellow) color and knit four rows in stocking stitch (1-3 rows - facial, 2-4 rows - purl).

Next, with blue yarn, you need to knit two rows of facial loops, one row of purl and one facial.
Thus, it is necessary to knit eight strips of yellow and seven blue.

Then the loops are closed, and the resulting striped "accordion" is sewn to the beginning of the knitted track.

In order to sew the sole, you need to sew a blue detail at the bottom with a thread, then collect the lower part of the "accordion" on a thread and pull it off completely, and pull off the top part not completely, so that the remaining opening is visually sufficient for the baby's legs.

Similarly, we knit the second "marshmallow". Then, if desired, we decorate the resulting booties: we knit and sew on a bow, flower or other decoration.

In more detail, a master class on making marshmallows can be viewed in the following video:

The simplest booties for a newborn

We bring to your attention another simple step-by-step master class on knitting booties-socks for a newborn.

The booties knitting pattern described below is designed for a baby's leg aged 3 months, six months and a year - the numbers for the last two ages will be given in brackets.

For work, you will need 55 (65-75) meters of yarn, the thickness of which is 150 meters per 100 grams, and two knitting needles numbered 4.5.

So, let's start knitting.

We collect 27 (35-43) facial loops on the knitting needles.
The first and each subsequent odd row is knitted.
2nd row starts with knit 1, yarn over, 12 loops (16-20) are knitted, 1 loop is added, knit 1, yarn over again, 12 (16-20) loops are knitted, again yarn over and one knit. 31 sts (39-47) should remain in the row.
Row 4 starts with knit 1, yarn over, knit 14 (18-22), yarn over, knit 1, yarn over, then knit 14 (18-22), yarn over, knit 1. At the end of the row, 35 loops should remain (43-51).
Row 6 starts with knit, then yarn over, knit 16 (20-24), yarn over again, knit one, yarn over, knit 16 (20-24), yarn over, knit last. At the end, 39 loops remain.
Then eleven rows are knitted using the garter stitch method.
In order to reduce the toe on two knitting needles, it is necessary to knit:

1 row: knit 15 (19-23), then knit 2 together, knit five, slip one, knit the next one stitch through the slip, slip off. The knitting turns.

2nd row: two front loops are knitted together, five front ones, 1 loop is removed, 1 front loop is pulled through the thrown one, the thread is in front of work, 1 is thrown off like a wrong one. Knitting is turned over.

3: two loops are knitted together, five loops are knitted, one loop is discarded, the next one is knitted with the front one through the removed one, the loop with the thread is removed again before work. The product is rotated.

4: knit as the second row.

5: two loops are knitted together with the front, five are knitted, the loop is thrown off, one front is pulled through the removed one, the last loop is removed. Turn.

6 - 8: knit in the same way as knitted 4 - 5 rows.

9: knit two loops together, knit five loops, one loop is removed, knit one loop, stretched through the dropped loop. Further, until the end of the row, facial loops are knitted.

The second sock is knitted in the same way.