Dye a mink coat at home. How to dye fur at home - seasonal wardrobe update

Undoubtedly, it will be much easier to take it to a dry cleaner or to specialists. Then the fur coat will definitely not deteriorate under any circumstances. However, you can do it yourself, but at your own peril and risk. When painting or changing the color of this kind of clothing, many factors should be taken into account - the age of the fur coat, the density of the seams, the possibility of the skin drying out. Can you dye a mink coat? Answer: of course. But first it has to be processed.

For this you will need:

· glycerin;

· ammonia;

· special means for washing of fur products;

It is necessary to carefully coat the inside of the skins themselves (and not the lining) with glycerin. This is necessary so that they do not dry out after getting wet.

And the fur itself should be treated from dirt with an alkaline solution, which consists of three teaspoons of salt, one teaspoon of ammonia and a similar amount of detergent. All this must be poured into one liter of warm water and add a pinch of soda. Then mix thoroughly.

All this must be applied to a fur coat, laid out on the floor without folds, from the front side, carefully brushing the fur with a brush. This procedure will clean it of dirt, due to which the paint may lie unevenly. After that, the fur should dry on its own.

How to dye a fur coat yourself?

Now you can paint.

1. To solve the question of how to dye the fur, you will need several packages of high-quality hair dye (depending on size and density) and a large ceramic bowl.

2. The paint in it must be diluted according to the instructions on the package.

3. Then, paint should be applied to the unfolded fur coat with a special brush or brush, after slightly wetting the fur. It is advisable to put on gloves before this - if necessary, it will be possible to equalize the substance directly on the clothes.

4. After 30-40 minutes, rinse the fur in water with vinegar, and then blot thoroughly with paper towels until slightly damp. It is forbidden to wipe and wring out the fur more actively.

5. Then you should let the coat dry on its own. You can stretch it a little on the shoulders so that it does not sit down.

Fur fades in the sun. Precipitation also affects its brightness. As a result, even the most expensive and high-quality fur coat begins to look shabby and old over time. Painting will help get rid of signs of wear.

First, clean the fur: comb it, remove dust and other small debris. If this is not done, foreign particles will not allow the paint to lie evenly. Then choose the tool you will work with. Remember that even the most persistent options will only maintain a given color for 1 season. By the beginning of the next painting there will be no trace left.

How can fur be dyed?

Most often, housewives turn to either professional dyes designed for use on fur products, or ordinary hair dye. The latter will have to be purchased in large quantities. Especially if the pile is long, thick, and the fur coat does not apply to shortened models.

Also be sure to test for compatibility. Apply the purchased dye to an inconspicuous area of \u200b\u200bfur. Keep the allotted time. Wash away. Wait a couple of days. If during this period nothing terrible happens to the thing and the resulting shade suits you, proceed to full-scale painting.

What is needed for work?

List of items and materials that will be needed in the process:

salt, soda;
glycerin, ammonia;
specialized product for washing fur things;
water.

Self painting algorithm

So, it is necessary:

Before applying some types of paint, you will have to wet the fur. Just spray some water from a spray bottle.

Important nuances

During application, try to paint over all areas, do not miss anything, but move quickly. Otherwise, one part of the product will be painted over better than the other. This will happen due to the different duration of exposure to pigments. If there are problems with the speed of completing tasks or there is no experience, it is worth resorting to a spray gun. Just don't bring it too close to a piece of clothing. It is necessary to spray from a distance (approximately 50 cm).

Important! If you use specialized paint sold in spray cans, it should be sprayed from a distance of 60–70 cm.

At the end of the application, soak the paint for the allotted time. The length of the wait depends on the active dyes, but usually the instructions say 30-45 minutes. After the set time has elapsed, rinse the fur coat in the vinegar solution and blot the pile with paper towels. This will remove any remaining paint.

It is forbidden to wring it out with your hands, twist it, drive it with sponges or take other manipulations aimed at drying it as soon as possible. For this purpose, you can use only napkins.

The next step is optional but recommended. Experienced housewives advise immediately after removing the remaining dye, apply a mask for colored hair to the undercoat. Professional products are best suited, which not only protect the color from washing off, but also take care of the hair structure. Their effect will be noticeable in 2-5 minutes. After this time, rinse the clothes again.

How to dry properly?

After all the work, the fur coat is placed on wide coat hangers, ideally suited in size. It is also worth paying attention to what material the thing is made of. Thin steel simply cannot stand it and will bend from the weight of a damp fur coat, if it is, say, mink or sable fur. That is, there is no point in focusing on the fact that the hanger has never been deformed under a fur product before, because until that moment outerwear has always been dry.

Optimal option: durable wooden hangers. Put them together with a short fur coat in a warm room. Try to make sure that the heaters, if they work, are as far away from the fur as possible. If good hangers are not at hand, you can resort to another method of drying.

Action algorithm:

let the water drain;
apply glycerin and set the direction of the pile, if necessary;
fold in half;
place on a hard, flat surface (the fur should be on top);
put a well-absorbent cloth;
periodically change the absorbent cloth to dry.

At first, this will have to be done every 1.5-2 hours, then the duration of the break will begin to increase. In general, drying a fur coat takes from 3 to 5 days. During this time, experts recommend combing the product and inspecting its undercoat for strange changes.

In the event of bald spots, deformation and other defects, immediately contact a dry cleaner for help. Perhaps the fur can still be saved.

Have you ever thought about how to dye fur at home. But surely every modern fashionista has a vest, a sheepskin coat or a fur coat made of natural or faux fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, or, perhaps, you will come up with the idea of changing the appearance of an old little thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, at an impressive cost, they do not always meet the expectations of customers. That is why the question of how to dye fur at home, whether it is possible, in general, to carry out this procedure on your own, is very common today. We will talk about it in the framework of this material.

Preparatory activities

The success of the "operation" largely depends on how well the preparatory measures will be carried out. Having decided to update the shade of the fur or radically change it, do not forget to clean it, because the dirt prevents the deep penetration of the dye, respectively, the result of dyeing affects.

For cleaning, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at the nearest pharmacy. All components must be thoroughly mixed with each other until a homogeneous mass is obtained. On the mezdra (bottom layer of the skin), to prevent drying out, apply a greasy cream, for example, for children. Then, armed with a brush with hard bristles, you should apply an alkaline solution to the fur, distributing it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.

What to paint?

If you do not know how to dye fur at home, what means to use for this, you have come to the right place. To date, there are enough professional paints and compositions in specialized stores, but hair dye is still no less effective and affordable. You can find it in any supermarket at an affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.

So, for dyeing, you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to the option with hard bristles.

fox fur

How to dye fox fur at home? Luxurious vests made of fox skins have been a trend of the last few years. They will be relevant in the near future, which is why the owners of such luxury need to properly care for it: update the shade of fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of the fur product. So why not take advantage of this opportunity?

Deciding on a shade

If you do not know how to dye natural fur at home, in particular fox fur, it is important to get acquainted with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing the fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

Let's start coloring

For maximum results, wet the fox fur with water, then proceed to apply the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to withstand the time indicated on the package. After that, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.

Mink

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be approached more demandingly. The same hair dye is perfect, but it is better to give preference to a professional series that will give the most natural natural shade, and it will last much longer than budget counterparts. But some recommend using spray paint. In this case, it is necessary to apply paint from a distance of 60-70 cm in several layers. Do not be afraid to layer paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use the general rules that work with any fur. In everything, the dyeing procedure completely repeats the procedure for transforming fox fur, described above.

Mouton fur

This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made of mouton fur gives. But not everyone knows how to properly care for the fur, which is why, with time of operation, there is a need for additional dyeing.

Mouton products are rightfully one of the most unpretentious, but speaking of staining, you should be patient, be extremely careful and accurate. Since how to paint fur at home with paint in the case of a muton. The pile of such fur is quite thick, dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small section of the fur product - in case of spots and bald spots, it is better to abandon the idea of \u200b\u200bself-dyeing and entrust it to professionals.

Artificial fur

Do you think only natural fur causes admiration and admiring glances of others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have turned the whole idea of fashion, beauty and luxury upside down. If you have a jacket or bag in this material in your wardrobe, update them with dyeing. Want to know how to dye faux fur at home? We will tell you about it.

The same hair dye is suitable for dyeing - in the case of faux fur, you can experiment, give preference to brighter, more acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get the perfect result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.

Summing up

We tried to figure out how to dye fur at home, and gave some of the most effective ways. With the proper approach to the procedure, the use of high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information provided and be sure to use our advice and recommendations.

It happens that your favorite fur product (hat, fur coat, collar, jacket) begins to lose its attractiveness, fades, becomes covered with ugly spots, sheds. Or you want to “update” the same fur coat, giving it a more saturated shade that is relevant in the new season. If you don't feel like throwing away a piece of clothing and don't have the funds to purchase something new, you can try repainting it to extend its lifespan. So how to dye fur at home without ruining the thing? Simple enough!

Preparing the product for painting

If your fur coat made of arctic fox, mink, beaver is quite old, it is better not to waste time on its “update”, because the fur may not withstand dyeing. And with a relatively new fur coat and hat, you can experiment. But first, prepare your garment for painting by thoroughly cleaning it before this procedure, because a dirty, soiled pile may not be dyed properly.

In water heated to 36 - 38 degrees, dissolve 20 grams of table salt, a couple of grams of baking soda and a twenty percent ammonia solution, adding a little shampoo. This amount of ingredients is enough for one liter.

In this solution, the skins must be stained for one hour. Then they need to be pulled out, squeezed and rinsed. For the process of dying fur, a solution of 500 grams of slaked lime, 250 grams of vitriol (iron) and 150 grams of alum diluted with 10 liters of water is also used. Apply this mixture to a fur coat or hat with a brush. When the fur is dry, rinse it in clean water.

How to dye fur: basic rules

If you still decide to update your fur product, find out how to dye fur at home with hair dye.

Choose a dye that is darker than the original shade, then small defects and imperfections in the skin will not be visible. Just remember that after about eight to nine months, the hair dye will begin to peel off, the coloring process will have to be repeated.

Things that are white or beige are well painted in different colors: both bright red and brown. And brown fur can be changed with dark chestnut or black dyes. In order not to accidentally spoil the product, first apply paint to the edge of the fur clothing.

How to choose a mink coat. What to look for? We determine the correct size of gloves. How to do this, read in this article. To look perfect on the handle.

It is better to paint the product in a large plastic tank; slightly wet the fur before painting. Put on rubber gloves to rub the paint more thoroughly. When your collar or hat is completely painted over, rinse it in water, adding a little vinegar to it. Stretch the skin on a flat wooden board, secure with pins and dry. To make the product shine, after drying, treat it with a balm for colored hair.

White fox fur coats often turn yellow. Spray paint for suede will help to remove this defect. It is necessary to spray the dye from a can at a distance of 70-100 meters from the fur coat. Apply the dye to the damaged tips, comb the fur coat with a brush so that the hairs do not stick together.

So easily and quickly at home, you can dye things made of natural and artificial fur.

Any fur product on any girl looks very beautiful and expensive, and you can wear it for more than one year. However, such things have a huge drawback - after a long wear, the villi begin to fade, lose their original appearance. From this article, you will learn how to dye fox fur at home so that you continue to be pleased to flaunt in a warm, beautiful little thing.

Preliminary preparation

Before you start painting a fur product, you need to prepare it, namely, get rid of all the dust and dirt on the villi. Otherwise, after the painting procedure, unpleasant stains and stains may form on the product, which will make it lose its former attractiveness even more.

So, for the procedure for cleaning a fur garment, it is necessary to prepare an alkaline solution. For a liter of water, the following proportion must be observed:

1 tsp dishwashing detergent or laundry detergent;
5 g ammonia;
12 g of edible salt;
10 g of soda.

Important! If you didn’t have ammonia and soda at home, prepare a solution where other ingredients are needed in equal proportions:
Alcohol.
Vinegar.

The cleaning process is as follows:

Mix all ingredients.
Apply the resulting liquid mixture to the entire area of the fur product using a brush.
Rinse the product with clean water.

Important! To avoid drying out, lubricate the inside of the product with some kind of oily hand cream.

Let's move on to painting

Although any fur is a delicate material, you can dye fox fur at home, and even in different ways. Now we will talk about them.

Universal way

Since animal fur is very similar in structure to human hair, it is better to use good hair dyes for dyeing fur at home. This method is suitable for dyeing fox fur, as well as for mink and rabbit.

Important! Do not forget that you need to pay attention to the structure of the villi. For example, mink and fox fur have stiffer hairs, which cannot be said about rabbit or silver fox. For this reason, two packs of dye may be needed.

First of all, you need to make sure that the desired shade is selected. For this reason, before you start painting the entire product, test the effectiveness of the substance on an inconspicuous area of \u200b\u200bthe clothing. Further:

Apply paint using a brush.
Spread the mixture over the surface with your hands.

Important! For this, it is better to use gloves.

Keep the substance on the product for as long as it is written on the package.
Rinse thoroughly with clean, warm water.
Leave it to dry.

Important! During drying, it is better not to use fans or hair dryers - this will only harm the pile.

After the product has dried, it is necessary to place it in a solution of warm water with vinegar - this will help fix the paint on the pile and extend the wear life.

Important! To give mink, rabbit or fox fur extra shine, you can use a hair balm. To do this, apply a solution of water and balm to the fur, soak for a few minutes and rinse it off.

It is better to dye fur at home with hair dye in natural, basic colors. Otherwise, the fur may not behave as you wish. Eg:

Mink fur from the fact that it was dyed in a light color can turn yellow and lose its expensive look forever.
And with the fur of a white rabbit - on the contrary, you can experiment by giving it different shades, however, it is strictly forbidden to highlight it.

Important! If you doubt your abilities and are afraid to carry out the dyeing procedure yourself, it is better to take the fur product to a special workshop, where professionals will undertake this procedure.

We paint a mink

A mink fur coat is distinguished by its expensive look and durability to wear. In order to dye mink fur at home, you need to stock up on the listed materials:

Color matching hair dye.
Spray.
Comb with frequent teeth.
Shampoo and hair balm.
Oily cream.

To dye a mink coat or hat, you must follow the above algorithm:

Pre-clean the thing from fat deposits and dust.
Treat the mezdra with a greasy hand cream.
Prepare hair dye according to package instructions.
Slightly moisten the fur surface using the prepared spray bottle.
Now you can proceed to the main procedure - start painting a mink coat at home. To do this, apply the coloring matter using the same spray gun. The distance should be approximately 55 cm.
Align the tone by walking over the surface of the comb.
Wash off the paint with warm water and shampoo, rinse the product with a solution of water and hair balm.
Again apply cream or glycerin to the mezra.
Lay the product on a flat surface, wait for it to dry.
Comb the pile in the direction of its growth.

We paint a fox fur coat

The fox fur coat lends itself most well to artificial coloring. In order to paint it in the desired color, you need to prepare the following materials:

Hair dye that matches the shade of the fur product.
Glycerin or fat cream.
Balm.
Gloves.
Paint brush.
Vinegar.

To carry out artificial coloring of fur at home, you must follow the above algorithm:

Lubricate the mezdra with a fat cream or glycerin.
Stretch the material on a flat horizontal surface.
Put on protective gloves and start applying the coloring composition, simultaneously smoothing the villi with your hand.
Wait for the time indicated on the paint package.
Rinse the product in warm water.
Wash it in vinegar solution.
Treat a fur coat or hat with a balm diluted in water, rinse off the solution after a couple of minutes.
Lubricate the mezdra again with a greasy cream, stretch and let it dry on its own.