Knitted sandals for 2 years. Crochet baby sandals for girls. We knit simple and warm crochet booties-sandals: a few tips

Booties - crochet sandals for boys and girls

Summer booties - crochet sandals, suitable for both boys and girls

Booties - crochet sandals, description and master class

Crochet booties - sandals for boys and girls - perfect for summer.

Size: 3-6 (6-12) months.

Materials: yarn Sugar 'n Cream (100% cotton, 71 g./110 m.) - 2 colors, hook 5.0 mm., two buttons.
Knitting density: 15 double crochets * 8 rows = 10*10 cm.
Attention! so that the booties do not turn out small, check the density of knitting and take a cotton of medium thickness (this is 100 g - 155 m)!

Crochet booties, description for size 0-3 months:

Sole:
1st row: 9 in / p., Knit 3 tbsp. b / n in the second loop from the hook, 1 tbsp. b / n next. 5 loops, 1 half. s / n in the next. loop and 7 half. s / n in the last loop, turn the work, knit along the other sides of the chain, 1 half. s / n in the next. loop, 1 tbsp. b / n in the last. 5 loops = 22 loops, do not connect, knit in a spiral.
2nd row: 2 tbsp. b/n. in the first loop of the first row, 2 tbsp. b / n next. 2 loops, 1 st. b / n next. 7 loops, 2 tbsp. b / n next. 5 loops, 1 st. b / n in the next 7 loops = 30 loops.
3rd row: (1 tbsp b / n in the next loop, 2 tbsp b / n in the next loop) - 3 times, 1 tbsp. b / n next. 7 loops, (1 tbsp b / n in the next loop, 2 tbsp b / n in the next loop) - 5 times, 1 tbsp. b / n next. 7 loops, connecting column in the first loop of the row = 38 loops.
Finish work.

Foot:
1st row: 1 in / p., 1 tbsp. b / n next. 27 sts, turn work (leave last 11 sts open) = 27 sts.
2nd row: 1 in / p., 2 tbsp. b / n together, 1 tbsp. b / n next. 11 loops, 2 tbsp. b / n together, 1 tbsp. b / n in the last. 12 sts = 25 sts, turn.
3rd row: 1 in / p., 2 tbsp. b / n together, 1 tbsp. b / n next. 10 loops, 2 tbsp. b / n together, 1 tbsp. b / n in the last. 11 sts = 23 sts, turn.
4th row: 1 in / p., 1 tbsp. b / n in the first 9 loops, 1 half. s / n in the next. 5 loops, 1 st. b / n in the last. 9 sts, turn = 23 sts.
5th row: 1 in / p., 1 tbsp. b / n in the first 3 loops, knit only for the front arch of loops 1 conn. column next. 6 loops, 1 st. b / n next. 5 loops, knit only for the front arch of loops 1 conn. column next. 6 loops, 1 st. b / n in the last. 3 loops = 23 loops.
Finish work.

For the left bootie:

For the right bootie:
Sew on buttons.

Crochet booties, description for size 6-12 months:

Sole: knit two in color 1 and two in color 2.
1st row: 10 in / p., Knit 3 tbsp. b / n in the second loop from the hook, 1 tbsp. b / n next. 5 loops, 1 half. s / n in the next. 2 loops and 7 half. s / n in the last loop, turn the work, knit along the other sides of the chain, 1 half. s / n in the next. 2 loops, 1 st. b / n in the last. 5 loops = 24 loops, do not connect, knit in a spiral.
2nd row: 2 half. s / n. in the first loop of the first row, 2 half. s / n in the next. 2 loops, 1 half. s / n in the next. 8 loops, 2 half. s / n in the next. 5 loops, 1 half. s / n in the next 8 loops = 32 loops.
3rd row: (1 tbsp b / n in the next loop, 2 tbsp b / n in the next loop) - 3 times, 1 tbsp. b / n next. 8 loops, (1 tbsp b / n in the next loop, 2 tbsp b / n in the next loop) - 5 times, 1 tbsp. b / n next. 8 loops, connecting column in the first loop of the row = 40 loops.
Finish work.
Connect two soles of different colors with connecting posts.

Foot: connect the thread of color 1 at the end of the formation of the fingers (see photo 2, = 11 central loops for the fingers), knit
1st row: 1 in / p., 1 tbsp. b / n next. 29 sts, turn work (leave last 11 sts open) = 29 sts.
2nd row: 1 in / p., 2 tbsp. b / n together, 1 tbsp. b / n next. 12 loops, 2 tbsp. b / n together, 1 tbsp. b / n in the last. 13 sts = 27 sts, turn.
3rd row: 1 in / p., 2 tbsp. b / n together, 1 tbsp. b / n next. 11 loops, 2 tbsp. b / n together, 1 tbsp. b / n in the last. 12 sts = 25 sts, turn.
4th row: 1 in / p., 1 tbsp. b / n in each loop of the row = 25 loops, turn
5th row: 1 in / p., 1 tbsp. b / n in the first 10 loops, 1 half. s / n in the next. 5 loops, 1 st. b / n in the last. 10 sts = 25 sts, turn
6th row: 1 in / p., 1 tbsp. b / n in the first 3 loops, knit only for the front arch of loops 1 conn. column next. 7 loops, 1 st. b / n next. 5 loops, knit only for the front arch of loops 1 conn. column next. 7 loops, 1 st. b / n in the last. 3 loops = 25 loops.
Finish work.

For the left bootie: connect thread 2 in the first row of the base of the foot on the left side (see photo 4), knit with connecting posts up to the last row of the top of the foot, dial 6 in / p. for the buttonhole, knit with connecting stitches around the booties to the first row on the other side of the work.

For the right bootie: knit as for the left, only a hole for buttons from 6 v / p. do it on the other side.
Sew on buttons.

Knitting crochet booties-sandals It will take you little time, and everyone will enjoy the result. The length of the sole is 12 cm. Our sandals are knitted for a child of 6-12 months.

For work you will need:

• Yarn Pekhorka Successful blue (100% cotton; 50g - 220m);
• YarnArt Summer yarn (70% cotton - 30% viscose; 100g - 400m);
• Hook number 2.

Legend:

• VP - air loop;
• CCH - double crochets;
• RLS - single crochet;
• SS - connecting column;
• CC2H - a column with 2 crochets;
• CC3H - a column with 3 crochets.

The first part of the video tutorial on crocheting the soles of booties-sandals:

Description of the process of knitting soles for crochet booties-sandals:

Below is a diagram by which you can tie yourself.

Crochet soles for booties-sandals:

• 1 row: 1 VP and in the 2nd loop from the hook we begin to knit - 7 sc, 7 dc and in the last loop we knit 8 dc (rounding the toe) and now we knit the opposite side - 7 dc, 8 sc and knit 3 sc in the same loop ( heel rounding), SS;
• 2 row: 3 VP, 15 dc, 5 turning loops, we knit in one loop 2 dc each (5 times), go to the opposite side and knit 16 dc, 3dc in one loop, 4 dc in one loop, 3 dc in one loop, sl-st ;
• 3 row: 3 VP, 15 CCH, turning loops - in one loop - 2 CCH, 1 CCH, in one loop -2 CCH, 1 CCH, in one loop -3 CCH, in one loop - 3 CCH, 1 CCH, in one loop - 2 CCH, 1 CCH, in one loop -2 CCH. We pass to the opposite side 16 CCH, in one loop - 2 CCH, 1 CCH, in the bottom of the loop - 2 CCH, 1 CCH, in one loop -3 CCH, in one loop - 3 CCH, 1 CCH, in one loop -2 CCH , 1 CCH, in one loop -2 CCH, SS.
• 4th row: RLS.

For each of the soles you need to tie 2 insoles. Only 4 pieces.

We apply 2 insoles with the wrong side to each other and knit RLS in a circle with white yarn.

The second part of the video tutorial on crocheting the top of booties-sandals:

We knit a heel with a strap

We mark the middle of the heel, count 7 loops in different directions and also mark with pins.

We report 7 loops from the pin and start knitting the right sandal:

• 1 row: (blue yarn) 3 ch, 6 dc, 15 ch, 7 dc, 21 ch (strap);
• 2 row: turn knitting, 1 VP and knit the entire row of RLS;
• 3 row: 3 VP, we knit the entire row of CCH, at the end of the strap we do not knit 9 loops. These will be the holes for the buttons. We knit like this: * 1 VP, skip one loop and knit 2 CCH * - 3 times.
• 4 row: (white yarn) we tie the entire heel and RLS strap.

The left sandal is knitted in the same way. Only the strap should be in the other direction, so we will have 1 row like this - 21 VP, 7 CCH, 15 VP, 7 VP. Further rows will be like the right sandal.

We knit a toe and straps of sandals

You can print the diagram below.

Knitting pattern for a strap and harness for sandals:

We collect 16 VP with blue yarn.

We knit a side harness (white yarn in 2 threads). We mark on both sides with pins the place where we will start knitting the harness. We attach the thread and knit 1 VP, 5 RLS. Next, we continue to knit RLS to the length of the harness we need, it all depends on the fullness of the foot, I have 7 cm. We leave the end of the thread long, in order to then sew the harness on the opposite side.

We begin to knit the central harness (blue yarn in 3 threads). We mark with two pins where the beginning and end of the harness will be. We attach the thread and knit:

• From 1 to 4 row: 1 VP, 7 RLS;
• 5 row: 6 VP, 2 VP, skip 2 loops and knit 2 СС3Н, 2 VP, skip 2 loops and knit 1 СС3Н in the last loop. It turned out a hole for the side harness.
• From 6 to 10 row: we knit 7 sc;
• 11 row: 6 VP, skip 2 loops - 1 СС2Н, 2 VP, in the last loop 1 СС2Н. There is a hole for a strap.
• 12th row: RLS.

We pass the side harness through the hole and sew it on the opposite side. We pass the strap through the second hole. We sew on a button. Sandals are ready.

Any mother-needlewoman is happy to knit for her kids. After all, what is made with your own hands is filled with love and warmth.

To create true DIY magnificence, you just need a little patience and follow my instructions. And then you will succeed! To complete this master class, it is necessary to choose only high-quality yarn in order to avoid an allergic reaction on the delicate skin of the child.

You will need:

• Yarn 100% acrylic;
• Hook #3;
• Brooches or other decorations, ribbons;
• Scissors, thread and needle.

List of abbreviations:

• V.p. - air loop
• S.n. - a column with 1 crochet
• S.b.n. - single crochet

How to crochet sandals - a master class for beginners:

The sole and upper part of sandals.

1. We collect 10 vp with a light green thread. Then you need to insert the hook into the 8th loop and continue knitting s.n. In the next four rows, add 1 loop at the same time on both sides of the knitting. After 4 rows are knitted, the number of columns will be 16. When 24 rows are knitted from the beginning of work, it is necessary to start decreasing. To do this, you must simultaneously knit 2 loops together along the edges of the product. So you need to knit only 4 rows, in the end there should be 8 columns. At the end, it is necessary to tie the entire part of the s.b.n. in a circle.

We start knitting the heel in height.

1. To do this, you need to count 7 rows from the beginning of knitting the sole and start to perform one row of s.n., while capturing only the back of the loop of the lower columns. Having knitted a row to the opposite side, you need to dial 30 ch. and attach to the beginning of the heel. This will be the first strap of a knitted sandal.

2. We knit it with s.n. in a full circle, while not forgetting to perform three reductions of the columns: the 1st must be knitted exactly in the middle. It consists of 5 columns in one. The 2nd is performed at the place where the strap is attached to the heel. To do this, knit 3 columns in one loop. And the 3rd is performed similarly to the second, only on the opposite side.

3. Next, we continue knitting the heels evenly on both sides, subtracting 2 columns each. So we knit two rows. Again we perform a set of 30 ch, for the next strap, but unlike others, it should not have decreases. It is this strap that we will fasten, for better fixation of the sandal booties on the leg, therefore, it must have a free end.

4. At the end, we perform lace. To do this, we knit 1 s.n., 1 ch. and s.n. We perform sandal on the entire upper part of the booties, including on the strap. Next, we knit arches: 1 s.b.n., 3 s.n. and so on to the end of the row.

5. We knit the remaining straps. We introduce a hook under the first strap and knit a row of s.n., while not forgetting to grab only the back thread of the loop of the bottom row. We attach the thread to the sixth column from the previous strap and dial 12 ch, 6 next sc. we knit from 6 columns of the previous strap (exactly in the middle of the booties), then we knit 12 ch. We knit the next row with s.n.

We also knit the last strap from the 6th column from the previous strap. We collect 10 ch, 6 s.b.n., 10 ch. Then we perform a series of s.n. In the middle we knit 6 columns into one.

6. On the edge of the sole we perform openwork: 1 s.n., 1 ch, 1 s.n., and so on throughout the circle. Then 3 s, 1 s.b.n. around the entire circumference of the sandal. On the bends of the sole we knit 3 columns from each loop. We knit the second sandal in the same way.

We decorate our knitted sandals.

1. We stretch the ribbon along the edge of the lace and tie a bow out of it on the back surface of the booties-sandal.

2. Next, we do the same with the upper part of the booties-sandal and the strap-lock. We tie a bow on the side of the sandal, it will be a full-fledged clasp.

3. Then we proceed to decorate the central part of the sandal. For this fit any jewelry. It is she who will determine the true beauty of the entire product. For my booties, I picked up Barbie doll jewelry. It is perfect for girls of all ages. We fasten the jewelry with a thread as tightly as possible. After all, the baby is very curious and can, if desired, taste it, so do not spare the thread.

4. Well, now you know how to knit sandal booties for a princess! These sandals will decorate any outfit of a little fashionista!

Crochet booties-sandals are summer shoes for babies who still cannot walk and are in a stroller during a walk. In such "shoes" the child will feel comfortable, as well as look beautiful and very elegant. You can knit booties-sandals with your own hands, this will require basic crochet skills and a little time.

We knit simple and warm crochet booties-sandals: a few tips

We choose the hook number depending on the thickness of the threads, they should be approximately the same. In this case, knitting will be as convenient as possible, and the canvas will turn out to be even and beautiful.

All additional accessories, for the safety of the baby, must be firmly and securely sewn on, especially when it comes to small items that can be swallowed.

This model is good because it is quite easy to knit, it will take quite a bit of time, so it is suitable for beginner knitters. In addition, according to the above master class, you can knit booties for both girls and boys, you just need to choose the appropriate color.

To knit it, you will need the following materials:

• children's cotton yarn (about 50g);
• hook of suitable size;
• knitting markers.

Sole knitting pattern:

1. We start with the sole, you will need to immediately knit 4 identical blanks, that is, you will need two for each bootie. We collect a chain of 14 air loops, then we knit according to the above pattern. We focus on the size of the child's legs, if necessary, add rows by analogy.
2. We apply two soles to each other so that all the edges coincide, fasten with a safety pin. We tie in a circle with semi-columns, we get the pins.
3. The upper part of the booties will consist of straps and lacing. With the help of markers on the sole, we mark the points where the straps will be located: two pairs in front and a pair on the heel.
4. From the marked points, we begin to knit all the straps in straight and reverse rows as follows: we hook the hook into the loop of the base, we knit one air loop for lifting, 2 single crochets, 1 air loop for lifting, we knit 4 rows like this, then we perform 3 air loops for lifting , 2 double crochets, cut the thread.
5. Laces: we collect a chain of 200 air loops, we knit them with connecting posts. We steam the finished laces with an iron.
6. We thread the laces into the straps (between the top two columns) so that the ties are on the back side.

If the sandals are intended for a boy, then it is enough to knit them according to this description in the appropriate color. Booties for girls can be additionally decorated, for example, by tying flowers and sewing to the straps.

Trying to crochet cute booties-sandals for a baby

This model of knitted sandals was created especially for little beautiful and tender girls. Despite the simplicity of their execution, they are very beautiful and elegant.

To knit these booties-sandals, you will need the following materials:

• children's cotton yarn in two colors;
• hook of suitable size;
• two buttons;
• needle, scissors.

Sole knitting pattern used:

1. We start knitting from the sole. We collect a chain of 8 air loops, then we knit the sole according to the scheme given above. We knit 2 blanks from yarn of one color and two from yarn of the second color. We focus on the size of the child's legs, if necessary, add rows by analogy.
2. We take two soles of different colors, apply them to each other, tie them in a circle with a half-column, connecting them to each other.
3. We find the central loop on the toe, count 8 loops from it in both directions, leave this part open. We knit the rest of the rows in straight and reverse rows with single crochets (6 rows in total). Cut the thread, hide the tip.
4. We tie the edges of the sides with a thread of a different color, we make a loop of 10 air loops in the upper part.
5. Sew on buttons.

The booties are ready!

A selection of videos on the topic of the article

To date, needlewomen have come up with a huge variety of crocheted models of children's sandals - from the simplest to the very complex. Having understood the principle of knitting such shoes for kids, you can create unique models with your own hands. For inspiration, we have selected several videos with interesting master classes on knitting such shoes for kids.

Booties sandals with three straps GREEN GLAMOR!

We collect 16 air loops. In the fourth loop from the hook we knit 3 tbsp. with a crochet. Next, we knit according to scheme 1. In the 4th row you should get 70 st. b.s. (pic 1)
5th row knit st.b.n. for the back thread. Knit the 6th row with the usual st.b.n. (Figure 2). Break the thread.

Straps.

Fold the sole in half and find the center at the toe. The middle should be 5 columns. Tie a thread with a regular knot and tie 13 air loops, then attach it to the opposite side of the spout with a half-column without a crochet (ps.b.n.) (distance 5 st.b.n.). Next, knit according to scheme 2 (only what is indicated in blue and dark red). The nose should look like in fig. 3. Do not break the thread.

Heel.

In the last row, you clung to the sole with 2 half-columns b.n. Further:
1 row: ch 3, attach them to pst.b.n. to the strap (skip 3 dc). Tie 34 st. n. and also attach pst. b. n. to the strap.
2nd row: ch 1 and the whole row of st. b.s. = 35 st.b.n.
3 row: Again ch 3 and 34 st. With. n., 4 vp, 3 tbsp. s.n. in the middle of the strap, ch 4
Next is a row of arches for the ribbon. 5 v.p., st.s.n. through 1st.s.n. the previous row. St. s.n., 1 v.p., st.s. n. repeat the entire row in a circle.
Start the next row with pst. b.s. in an arch, 4 ch, st.s.n., 1 c. p., st.s.n. again in the arch. And so the whole series.

Strapping.
You can simply tie with single crochets. And maybe pst. b.s. in an arch, 2 air. loops, pst. with a crochet. Repeat the entire row.

I almost forgot, my little secret, to keep your booties neatly shaped, wet them and give fom with your hands!

BOOTS

Sandals with 4 straps White tenderness, Pink sweets

This model is slightly longer in the nose. They fit in the same way as with 3 straps, but for the sole you need to dial 22 loops and knit in the same pattern. In the third strap, you should make an increase in the middle as in the 1st and 2nd = 23 st. In the fourth, knit without increments = 25 tbsp. And in the heel, in the third row, instead of 4 ch. knit 6 ch

1.

2.

3.

Another beauty for baby

Sole.

We collect 16 air loops. In the fourth loop from the hook we knit 3 tbsp. with a crochet. Next, we knit according to scheme 1. In the fourth row, you should get 70 st.b.n.

Knit row 5 with a half-column with a crochet (p / st.s n.): we make a crochet and insert a hook under the posts.

Knit the 6th row with the usual st.b. Break the thread.

Straps.

Fold the sole in half and find the middle at the toe. The middle should be 5 columns. Tie a thread with a regular knot and tie 13 air loops, then attach to the opposite side of the nose with a half-column without a crochet (pst.b.n.) (distance 5 st.b.n.) Then knit according to scheme 2.

Heel.

In the last row, you clung to 2 pst.b.n. to the sole. Further:

1 row: ch 3, attach them to pst.b.n. to the strap (skip 3 dc). Tie 34 st.s.n. and also attach the pst.b.n. to the strap.

2 row: ch 1 and the whole series of st.b.n. = 35 st.b.n.

3 row: Again ch 3 and 34 st.s.n.. 4 VP, 3 st.s.n. in the middle of the strap, ch 4, attach pst.b.n.

5 row: ch 3 and knit the whole row of st.s.n. Break the thread.

Strapping.

Now we begin to tie the bottom, we start from the center behind the booties, with a hook we grab 2 loops of the pigtail, which we formed when knitting the 5th row of the insole and knit a row of shuttlecocks: st.b.s. and st.s.n. in one loop, ch, skip one loop, and so repeat in a circle. Break the thread.

In the same way, tie the top of the booties.

Now you can stretch a satin ribbon into the holes