How to cut jeans beautifully at home. How to make ripped jeans? How to make holes in jeans at home

The fashion for worn and torn jeans has been around for a long time. But only five years ago they appeared on the catwalks and were finally recognized as high fashion designers. The 2019 season is no exception. Ripped jeans are quite popular. You can buy a ready-made new product, or you can rip the jeans yourself.

Read our article on how to fashionably cut denim trousers at home.

How to choose jeans?

Fashionable slits sometimes give old things a second life. Surely every fashionista has at least one pair of jeans that it’s a shame to throw away, but can no longer be worn. They are perfect for experimentation. If the resulting slits are successful, the old pants will turn into a fashionable new thing.

To break up your jeans, choose a mid-weight model. Very thin and too thick materials will not work: the slots will look ugly.

Ripped jeans with a straight silhouette look most impressive. Too wide or narrowed models are difficult to tear beautifully on your own. Take them on if they are already hopelessly damaged.

The slits look most impressive on classic “denim” colors: light blue and blue. Transverse threads of a light shade create the very contrast that attracts fashionistas in ripped jeans.

Fashionable tight-fitting jeggings or trousers with a high elastane content are unlikely to tear beautifully. The slit will unsightly spread when put on, and there will be no frayed fringe at the edges.




Necessary tools for cutting jeans

All necessary tools must be prepared in advance.

To create slits on jeans you will need:

  • Jeans;
  • Stationery knife;
  • Nail scissors;
  • Pumice or sandpaper;
  • Chlorine-based bleach;
  • Plastic plate to protect the opposite side;
  • Tweezers.

Preparatory work

Ripped jeans look best paired with distressed jeans. Therefore, you will first have to “age” the pants.

Spread the experimental jeans on a flat surface. Place a plastic or any other plate inside the legs so as not to damage the back.

Now you can start rubbing your jeans with sandpaper or pumice stone. Try to avoid the knee area, as the tissue there quickly thins naturally. Artificial aging can lead to the formation of unplanned holes.


Types of fashionable slits on jeans

  • Noodles– several frequent transverse incisions;

  • One or more large incisions;

  • Shaped cut;
  • Small holes,single or many at once.

The slots can be of one type or in combination. Before you begin, first consider the design and shape of the cuts. Do not forget that with wear and washing, the size of the holes and abrasions will increase. Don't make them too big or too close together, otherwise you risk getting one big shapeless hole.


Before starting work, try on the jeans and mark the places of future cuts with a pencil or a dry piece of soap. If your figure is far from ideal, do not make slits in problem areas. Limit yourself to a few small holes in the knee area. Remember that any decor, including slits and fringe, focuses attention on this part of the body.

For slots, the rule of horizontals and verticals works. Thus, vertical holes along the axial threads will visually elongate the legs, and horizontal slits and “noodles” will widen them. Therefore, make such cuts only if you have a slim figure.


Vertical cuts can be made covered with uncut transverse threads. To do this, you need to pull out several longitudinal threads through the slits at the top and bottom. The result will be a fringe effect. Such holes look very modest, since they do not reveal too much of the body, and at the same time impressive.

  • Having made the cut, you need to “dishevel” its edges a little. To do this, pull out several transverse threads.
  • The slits will look more natural if the edges are slightly whitened. Pour bleach on them for 10 minutes and then wash them.
  • It is better to wash your jeans by hand after the experiment. Firstly, this will prevent you from damaging your washing machine with chlorine bleach. And secondly, when hand washed, the edges of the slits will additionally fray and take on a natural shape.

Slot technology

So, start creating.

  • To make a small hole - a slit, make a cross-section in a verified place with a stationery knife. Try to get strictly between the transverse threads so as not to damage them. Then the fringe will turn out beautiful and even. Now use a needle or tweezers to release the transverse light threads and “ruffle” the longitudinal blue ones. You can further bleach the edges.

Processed with VSCOcam
  • To make a vertical slit with fringe, make two parallel horizontal cuts of the desired width at the top and bottom. Grasp the resulting loop with your finger and carefully, using tweezers, pull out all the longitudinal threads.


  • If you are going to make several cuts, try on the product after each one. This way you can stop in time if you no longer like the result.

  • If you are going to make a large or curly cut, you will need to additionally reinforce the edges with non-woven fabric. This is necessary to keep the shape better. The same should be done for very wide cuts, for example, on the knee (in this case, interlining will be needed in the corners of the slot).

Video on the topic of the article: how to fashionably cut jeans

Ripped jeans are in fashion right now. They fit perfectly into a casual style and complement any summer wardrobe. It’s not difficult to create beautiful scuffs and tears in jeans at home. If you have old jeans that you want to transform in this way, the tips in this article will be useful to you.

What can you wear with torn jeans? They go with almost everything: with a T-shirt and sneakers you get a simple and stylish look for every day, and with a smart blouse and heels you get a complete look for a party. However, ripped jeans come in many different varieties: frayed, cross-cut, cut out pieces of fabric, and some combine all of these.

Photos will help you decide exactly how you want to rip your jeans:

Ripped jeans add an edge to everyday looks, adding sass and independence to even the most understated, classic outfit. Fades and slits look stylish with almost any style of jeans - straight-leg versions, skinny styles, and trendy boyfriend jeans.

Here's another way to rip jeans - here, not just stripes are cut, but round holes. These jeans can be worn even in the fall with translucent tights. This model looks especially organic when the edges of the jeans are also cut without seams.

Horizontal cuts with abrasions look especially stylish on light-colored jeans. The white threads remaining at the tear site are practically indistinguishable in color from the main fabric and, as a result, look unusual. Light ripped jeans on tanned skin will look especially interesting.

Now simple horizontal cuts on the knee have become fashionable. As long as you don't bend your legs, they are almost invisible. This is a stylish, minimalist option for tearing jeans for those who find scuffs across the entire surface of the fabric too provocative.

How to rip jeans correctly?

Don't rush to make cuts on your jeans right away. Although they look natural and casual, this is a deceptive impression - ripping jeans needs to be carefully and thoughtfully for the result to look truly stylish. First, decide where exactly you want to rip your jeans. Here are the most popular options:

  1. Jeans torn at the knees
  2. Jeans ripped above the knee
  3. Jeans torn above front pockets
  4. Torn back pocket
  5. Cropped jeans

All these options can be combined in various combinations. What are the most popular ways to rip jeans?

  1. Attrition (transverse white threads)
  2. Horizontal cross cuts - from small to long, occupying the entire front of the jeans
  3. Oval and round holes

To ensure that jeans torn at home are no different from those bought in a store, you need to make the cuts carefully and competently, following simple recommendations.

  1. Always mark the cut location on the fabric in advance with soap or chalk. Don't draw lines by eye. First, put on your jeans and think about where you want to see tears and scuffs, mark these places, and only then draw clear lines. This will help you avoid unpleasant surprises when the gap intended at the knee ends up being higher or lower.
  2. Denim is very stretchy, which means all your cuts will stretch and get bigger over time. This is especially true for round holes.
  3. If you can't decide on a design, just find ripped jeans that you like and copy the rips and frays from them. This way you will know exactly what the final result should look like.

How to tear jeans at the knees?

Simple horizontal cuts at the knees and wide openings are now popular. Let's look at how to tear jeans this way.


To make a transverse stripe on your knee you need:

  1. Put on jeans and draw a line. The strip should be exactly in the middle, on the bend of the knee.
  2. After this, take off your jeans and make the line smoother and clearer. P
  3. Place something flat and thick on the inside of the jeans - for example, a piece of plywood, so as not to damage the back side.
  4. Then make a neat cut with a sharp utility knife along the marked line - scissors won't work because they won't give you a straight line.
  5. When you have made a cut, you can pull back the threads with a needle along its edges - this will give the effect of tearing the fabric.

You can rip your jeans by cutting a round hole at the knee:

  1. In the same way, put on your jeans to mark the desired areas, then take them off and clearly draw an oval or circle. Keep in mind that over time the hole will stretch and increase in size.
  2. The oval also needs to be carefully cut out with a knife, placing a flat, hard board on the inside. When finished, you can run a fine grater along the edges of the cut to create a worn effect.

In combination with a horizontal or round cut, several short, frequent horizontal cuts look great:

  1. Just determine their place and make a few movements with a knife, and then create the effect of carelessness by pulling the threads with a needle along the contour
  2. Such cuts will look best at the knee or slightly above, where the fabric tightly fits the legs
  3. You should not make them below the knee, because they will be almost invisible there

How to make distressed jeans?

Often there are not just torn, but frayed jeans. The abrasion is formed using transverse white threads. It can be done almost anywhere - on the knee, below the knee, above the knee, at the hip or in the back pocket.

The white threads, which we need for beautiful fraying, form the inner side of the fabric, and the blue ones form the colored side.

  1. To make a scuff, mark a spot for it and make light movements with the float from left to right.
  2. You don't need to use too much force to avoid accidentally damaging the white threads, otherwise you won't get abrasions.
  3. If the grater did not completely remove the outer blue layer of the fabric, you can pick up the excess threads with a crochet hook and pull them out.
  4. Once you have created the desired fraying, all that remains is to finish the edges.
  5. A smooth transition from white to the main color of denim looks good. This can be achieved by treating the edges with pumice. It will fluff up the threads, add volume to them and lighten them slightly, which will give that same transition.

How to tear men's jeans?

To rip men's jeans, you can use all the same techniques as for designing women's jeans. Cuts and abrasions on the knee will look good - this is almost a win-win option. You can also make fraying or many frequent cuts just above the knee or on the pockets.

Men often wear black jeans. Keep in mind that they may make the scuffs look a little different. If the jeans are also painted black on the reverse side, you will not be able to achieve the same effect of color difference when worn. And, if you have a white back, be prepared that the contrast with black will be stronger.

Video: How to tear jeans?

About ten years ago, ripped jeans first came to the Russian market. The older generation was simply perplexed by “worn” jeans. And young people happily wore the new product. However, since that time, ripped jeans have stood apart from world fashion; one might say, they have been a little forgotten.

In 2012, designers decided to return the old hit to our wardrobes. Ripped jeans have once again gained wild popularity among fashionistas.

In this article, we will look step by step at how to make ripped jeans yourself. To do this, three simple lessons will be presented to your attention.

We rip jeans at home

Not every fashion is considered practical, but in the case of ripped jeans, it literally gives old jeans new life. Surely every girl has jeans that she no longer wears, but it’s a shame to throw them away. Thanks to the fashion trends of the summer season, you can make an ultra-fashionable new thing from an old item with your own hands. But there are limitations: you should use only jeans made of medium-weight fabric as a basis; denim that is too thin or dense will not work.

Required Tools

To beautifully rip jeans at home you will need:

  • actual jeans,
  • stationery knife,
  • pumice (can be replaced with sandpaper if desired),
  • chlorine bleach,
  • plastic plate (for placing inside),
  • nail scissors.
  • Any ripped jeans look great if they have a distressed effect. Therefore, before you put holes in your jeans, you need to age them.

To do this, spread the jeans evenly on a surface convenient for work and insert a plate of plastic or any other material into the legs. The plate is needed to prevent you from cutting right through the jeans. Take a pumice stone and start rubbing it on your pant legs. However, you should avoid the knee area; friction makes the density of the jeans thinner, so unplanned holes may form over time.

you can do it yourself

If you haven’t yet decided what kind of ripped jeans you want to end up with, although you really want to have a fashionable item in your wardrobe, take advantage of the experience of the stars. Hollywood fashionistas have always loved ripped jeans; they are especially suitable for walking. However, at a fashion party you can also see a couple of celebrities wearing ripped jeans. This fashion has no boundaries, and ripped jeans make you look stylish and fashionable every time.

will always be relevant, especially in the summer season

Step-by-step instruction

As noted earlier, you can make your own ripped jeans in a variety of ways. We offer you three simple options that can be done at home without much difficulty.

Lesson #1

lesson 1 step #1 step #2 step #3 step #4 step #5 step #6

Ripped jeans are coming back into fashion; it would seem that they were already forgotten back in the nineties. But, as we know, fashion is cyclical, and once again famous couturiers bring models to the catwalk wearing jeans with scuffs and holes.

These jeans have become a real hit this season. If you want to be known as a real fashionista, you should definitely have at least one such stylish thing in your wardrobe.

There is no need to buy expensive ripped jeans, especially since they are not cheap. It is quite possible to turn old jeans into a real fashion masterpiece.

To do this, choose the right jeans. They should not be too narrow or wide. Because the finished cuts on skinny jeans will stretch even more, and on wide ones they will become completely invisible. So, the jeans have been chosen. What else do you need? Take a sharp utility knife, scissors and chalk.

We will need chalk at the very beginning stage. Hang the jeans on a hanger, mark where the cuts will be, they should be symmetrical and not very close to each other, because the denim can crumble over time and instead of neat cuts you will end up with a huge hole that will not make the product attractive. Mark the places of the cuts with chalk, then look at the jeans from the side, moving a few meters away from them. If you are satisfied with everything, proceed to further work.

It is worth noting that quite large slits will be fashionable in the new season. However, before you do them, be critical of your external data; if your legs and butt are far from ideal, you should not emphasize your shortcomings. Make neat cuts that will not draw attention to problem areas.

  1. So, everything is ready to transform your old jeans. Take a sharp utility knife and make cuts of the required size. You should be cutting, not tearing. Denim fabric tends to quickly fall apart when it rips, and a large hole usually appears at the tear site, which only grows over time. We don’t need this effect at all, since we are making a beautiful, designer thing.
  2. Then you need to fray the edges of the resulting holes and pull out a little extra thread. This usually results in a two-tone effect since denim is always lighter on the inside.
  3. If you end up with hanging threads that are too long, be sure to cut them, otherwise it will look completely sloppy.
  4. The threads around the cuts can be thoroughly ruffled and combed with a wide comb, then you will get a more “fluffy” version.
  5. You can also rub the hole a little and then the effect will be different – ​​worn. This feature is also in fashion today.

In addition, you can make not only longitudinal cuts, experiment, make stars, hearts and other shapes. They can also be beautifully frayed around the edges, making them look very original and fresh.

To begin with, make very few cuts and try them on, because the fabric will stretch on the body and the holes will become more noticeable. And you can always add a couple more cuts, but there’s no way to remove them. So don't rush, take more time, get creative, and you'll end up with chic ripped jeans, no worse than those from famous designers.

So, you finished the job, tried it on and were satisfied with the result. Then rinse the finished jeans in cold water and dry. Then iron it and you can wear it with great pleasure!

Ripped jeans - style

It should be said that when wearing such jeans, be sure to do hair removal. Otherwise, your legs, which are visible in the slits on your jeans, will not look aesthetically pleasing at all. Pay attention to the choice of underwear, it must be suitable.

Also think about what clothes you will wear with ripped jeans. It is very important that your image looks like a single, harmonious ensemble. A great option is T-shirts, tops, shirts tied in a knot, denim jackets. Designers and stylists offer complete freedom of choice when it comes to footwear – these can be boots, over the knee boots, sneakers or high-heeled shoes.

How to make ripped jeans? Video

As you can see, having spent very little time, you could easily create a stylish basis for a fashionable wardrobe!

Of the many types of clothing, jeans are the most popular in the world. And no matter how many pairs of these trousers we have in our wardrobe, among them there will always be a pair of our favorites. And if they suddenly lose their appearance due to an unexpected tear or abrasion, it will seem like a real disaster. But don’t despair: today it’s even fashionable, and therefore many fashionistas, on the contrary, are looking for a way to make ripped jeans from worn or completely new trousers.

How to make ripped jeans

So, to make a fashionable thing, you first need to take out a pair of worn-out but loved jeans from the bins of your closet and try to make them torn.

  1. For such experiments, medium-density denim is better suited.
  2. You will also need a sharp knife, you can use a stationery knife.
  3. A small piece of plywood.
  4. A piece of chalk and a vacuum cleaner, which will be used to remove lint and threads after cutting.

First, you should decide on the degree of “vandalism” you want: small abrasions, discreet cuts or super torn trouser legs. However, it is important to take into account that tears in the buttocks or knees often look ridiculous, so you need to think carefully about where to cut the tissue. After this, you need to outline the pattern of cuts as clearly as possible with chalk. Then the trousers are hung at eye level to evaluate the result from a distance. When everything suits you, you can begin action.

For your first try, it’s better to take jeans that you don’t mind ruining.

Before that, you need to place a small plywood under the places of future cuts on the jeans. This is done in order to make the cut as evenly as possible without damaging the opposite part of the jeans. Then a neat cut is made across the selected trouser leg according to the intended pattern. After all the cuts are made, a certain part of the threads perpendicular to the cuts is removed to weaken the transverse threads, which are quite strong and slightly lighter than the main color of the trousers, which will add style to the decor. It is advisable to make cuts at the same distance.

If there are large gaps between them, for the best effect you need to do them a couple at a time, and cuts made close together are an ideal option. After making the cuts, you need to use a knife to clean the longitudinal threads from the remaining lint. All that remains is to use a vacuum cleaner to completely remove any remaining threads.

To make your own ripped jeans more effective, you will have to arm yourself with bleach containing chlorine and carefully walk along the edges of the torn areas. In order to stuff your hand, you need to do this process on a separate piece of denim or in an inconspicuous place on your trousers.

If you want to decorate torn denim trousers with lace, you just need to turn the jeans inside out and sew openwork fabric under the cut areas, which can be purchased at any fabric store or simply cut from an unnecessary lace blouse. Black lace goes well with dark jeans, and gray or white lace with light jeans. The lace is sewn on with fine stitches using threads to match the color of the jeans. It is also important not to stitch the trouser leg all the way through, but try to capture only the inner threads, which will avoid untidy stitches around the perimeter of the cut. Upon completion of work, you need to wash the jeans and iron them. These trousers are washed by hand, placed in a gauze bag or an unnecessary pillowcase, since the washing machine can completely tear them.




If you are still not sure that you can handle decorating your favorite trousers, you can watch a video tutorial, for example this one, before making ripped jeans:

An action seen, rather than just read, is always perceived better.

After the appearance of such outfits on the streets of cities, older residents were generally shocked by them. Therefore, it is all the more necessary to be able to correctly combine them with the rest of your wardrobe. Although many stylists believe that ripped jeans can be safely worn with all more discreet things and literally with any shoes. But at the same time, it is important to adhere to the basic rule: the upper part of the outfit must be harmoniously combined in style with the shoes. And if we talk about specific options, there are a lot of them:

  • A blouse and high-heeled shoes combine interestingly and stylishly with ripped jeans, which is ideal for a party;
  • in your everyday wardrobe, ripped jeans can be combined with a classic, practical top and flats without heels;
  • on a country trip, you can wear ripped jeans and a loose T-shirt with sneakers;
  • on hot summer days, it is appropriate to complement ripped jeans with a chiffon tunic, while wearing sandals with high wedges.

Jeans with holes go with absolutely any shoes. With elegant pumps...

...with open heeled sandals...

...with ankle boots...

...with ballet shoes...

...with brogues or oxfords...

...with sneakers...

...and even with flip-flops.

True, sometimes, even after practicing how to make old jeans torn, you can get an undesirable result. But don’t be upset: firstly, the trousers were originally old and you probably wouldn’t be able to go anywhere in them. Secondly, even in these jeans you should feel irresistible, because you certainly won’t see anything similar on anyone else. Besides, maybe this particular form of cuts will soon become fashionable, perhaps even thanks to you. After all, for so many years now, these torn outfits have been trendy clothing, then slightly losing ground, then again soaring to the top of fashion. And they differ precisely in the way they cut denim. Stylists believe that ripped jeans will not fall into oblivion very soon and therefore give a completely reasonable hint: everyone should have these stylish pieces of clothing in their wardrobe. And there is absolutely no need to spend huge amounts of money on purchasing ripped jeans made by famous designers. You can transform your favorite, albeit old, denim into a very stylish thing yourself. The main thing is desire, attentiveness and a flight of imagination.

Celebrities in jeans of varying degrees of ripping

By the way, having learned it, you can supplement the experience gained with fantasy details and then you will get a completely new style of daring trousers.

So, to make ripped jeans more impressive and challenging, you should have some free time, a lot of patience, and add a couple of slits on the pockets or on the belt to the standard holes or abrasions.

You can also try to go beyond the generally accepted framework and cut out round holes, give them the shape of hearts or triangles. These figures can be trimmed with floss threads, decorated with rhinestones, lace, sequins, ribbons, and beads. After testing all possible types of “torture” on jeans, you can easily and safely even make... curtains from them. After the first trousers, your hand will gain sufficient experience, and you will be able to continue not only to become more sophisticated in decorating ripped jeans, but also to practice performing other design feats.








Making a fashion item with your own hands

Besides, how to make trendy ripped jeans using the method of cuts, our needlewomen are looking for the answer to the question of how to make jeans frayed or truly torn. Unlike the first method, in the second, sandpaper or pumice will be added to the tools necessary for the “operation”. As before, the model you like is selected. It is not so important where the prototype is taken from - from the Internet or a boutique. The main thing is to decide on the method of decorating: holes, slits or abrasions. After all, jeans are considered torn even if they simply have abrasions, which after machine washing will themselves turn into natural holes. Use a pencil (or chalk) to mark the locations of future holes. Again, before making beautiful ripped jeans, it's important to remember that vents look best below or above the knee. So, the trousers are laid out on a smooth surface. Then a block or plastic is placed between the legs under the intended place. When making slits, the fabric is cut along the drawn line with a utility knife. The transverse threads are pryed up with a needle and removed with tweezers. The holes are made in the shape of the letter “H”, and to make the cross threads easier to remove and the hole to look visually larger than it actually is, the cross bar in the letter needs to be made a little longer. You can also make two slits in parallel, and carefully remove the short longitudinal threads, which is very important in how to make beautiful ripped jeans. To perform abrasions, the prepared area must be rubbed with pumice. For a more original effect, you can scratch the intended area on the jeans with a razor. Again, the perimeter of the abrasion, cut or tear is treated with bleach and the jeans are finally washed.

Making jeans with holes and scuffs

Such unpretentious trousers also have certain requirements for a woman’s body type, depending on their cut. It turns out that straight trousers are suitable for large hips. The holes in this case are located vertically and not too often, which will give the figure a slim and visual elongation. When deciding on the ideal figure, you can choose any cut, but skinny denim trousers with provocative slits on the knees and hips will most emphasize your slimness. If you are short, holes should be placed only in the upper part of the trousers or on the calves, which will make the figure more defined and light. The most desperate girls can choose acid or neon jeans for even more brightness, which will make the look even more daring. True, to go with this color of jeans, you need to choose neutral light-colored things, so as not to turn into a palette of poisonous tones, from which simply ripped jeans will turn into “eye-opening” pants. After all, it is important to adhere to balance and harmony in everything, even in matters how to make stylish ripped jeans, which will help to emphasize not only individuality, but also the sense of proportion and taste of the owner of such trendy trousers.

Photo

These stylish jeans go with almost anything.

Not a bad option for a garage party

Wonderful everyday ensemble

Casual style

A brilliant (literally) look for a disco. Become the queen of the club!

Video