How to make a tank turret out of cardboard. DIY paper tank, diagram for beginners. Corrugated cardboard tank

Making a tank out of cardboard with your own hands

In order to create a vehicle, only in a smaller version, not so much will be required. Almost anything can be recreated from the materials that are always at hand, and a little more time, patience and imagination. A good example of such modeling is making a tank out of cardboard, which is used for packaging various goods. This can be a great option for spending a weekend with your children. They will certainly be happy, because children bring joy to any activity that they can do together with adults.

Necessary materials

As mentioned above. To create a tank model you will need very simple materials, namely:

• Packaging cardboard.
• Stationery scissors.
• Ball pen.
• A small ruler.
• PVA glue.
• Scotch, where would we be without it?

When all the materials are prepared, you can get down to business.

First: First, on a small piece of cardboard, you need to draw out all the main components of your future tank and then carefully cut them out. There are a lot of small parts, so it’s better to draw them out and cut them out right away. First you need to make two strips of cardboard measuring 20x1 centimeter, then two more strips of 10x1 centimeter and 8 small circles. They are easiest to make from 1x1 centimeter squares.

Second: what was done at the first stage was the tank tracks. To give them the appropriate shape, you should take these strips and fold them into an oval shape, secure their ends with tape, so they will stick. Strips of shorter length must be glued to one of the sides of each caterpillar using glue. You will have to hold them for a while until the glue sets. Once both pieces are glued together, you can cut off the excess cardboard.

Third: It's time to glue the cut out circles. On the empty side of your ovals, carefully glue the circles, after smearing them with glue. They need to be placed at the same distance; they act as wheels.

Fourth: it is necessary to make the following parts that will make up the tank, for this you need to cut out two rectangular pieces of cardboard measuring 5x7 centimeters, two strips 5x0.5 centimeters and one strip measuring 5x1 centimeters.

Fifth: glue the tracked parts of the tank to the long sides of one of the prepared rectangles, having previously coated them with glue. You need to glue one wide strip to the back of the tank, and two thin strips in front. Thus, you get the bottom of the tank with tracks; you need to glue a second rectangle on top. The result is a finished lower part - the base.

Sixth: to make the top of the tank you need to cut out of cardboard one square measuring 5x5 centimeters, one rectangle 5x1 centimeter and three strips 5x0.5 centimeters .

Seventh: On three sides of the square you need to glue three corresponding strips. Then glue what happened to the finished part of the tank using glue. The part that remains open must be sealed with a larger strip at an angle. It is better to cover empty triangles with cardboard of the required size.

DIY cardboard tank photo

Eighth: I need to make a turret for the tank. To do this, prepare the following parts from cardboard: rectangles with dimensions: 4x1, 3.5x2.5, 3.5x1 centimeter, one piece each, two rectangles measuring 2.5x1 centimeter, one trapezoidal figure made from a rectangle measuring 3.5x1 centimeter.

Ninth stage: you need to glue the trapezoidal part to the largest rectangle, and glue two identical parts on the sides at an angle of 90 degrees. The parts that remain must be used to cover the remaining elements.

The tank model is ready

Tenth stage:

Watch the video on the topic: DIY Tiger cardboard tank

Model of tank ready. Many stages can easily be entrusted to a child, so the activity will not only be useful, but also develop the motor skills of children’s fingers. See useful crafts at.

Today it no longer surprises anyone that not only boys, but also girls are actively interested in how to make a tank out of paper. A passion for paper models or simply the desire to make a pleasant surprise for their child or beloved man pushes girls to such a feat as assembling a paper tank. Believe me, even the simplest model will surely hit your favorite “tanker” in the heart.

The widest selection of paper tank templates and layouts is, of course, on Aliexpress:

How to make a tank out of paper quickly

A men's holiday, be it a birthday, the day of all military personnel - February 23, or the professional holiday of all tank crews (by the way, the second Sunday of September) - is an occasion to create a postcard with your own hands depicting, of course, a tank. How to make a tank out of paper quickly if you don’t yet dare to make more complex products than?

We offer you this version of a holiday card. To create it you will need green colored paper and old postcards for. On the back of the postcard, draw a drawing of a tank; its complexity will depend on your level of preparation. It is enough for a child to cut out the simplest silhouette from two ovals, but you can cut one that is very similar to a real tank. Separately, cut out and glue the barrel of the tank, decorate the applique with images cut out from old postcards. In order to give the card a relief, the technique of grain appliqué was also used. PVA glue is applied to the bottom edge of the postcard, and without waiting for the glue to dry, the surface is sprinkled with fine yellow grain. Shake off the excess from the card when the grains stick. Instead of “sandy” soil, you can make green grass from cereals by gluing finely cut strips of green colored paper left over from cutting out the tank onto PVA.

The next little tank may seem very simple to you, but it can be assembled in literally a minute and is perfect for stormy tank battles on the floor of the nursery. To assemble such a tank you will need a strip of regular A4 paper. From one sheet you can get two or three tanks for your division. Using scissors, carefully cut the sheet lengthwise into strips. We bend the corner of each strip so that the right corner is folded first, and then the left, forming an X-shaped fold. Using it, we bend the edges, getting an envelope from each edge. All that remains is to connect the edges together in a circle, insert the barrel glued together from a small piece of paper and draw identification marks on the tank and you are ready.

How to make a paper tank step by step master class

For more complex models, advice on how to make a tank out of paper, step-by-step master class must be included. After all, such tanks already contain many small parts that can only be developed independently after years of training.

Real professionals in assembling paper tank models are happy to share their creations with like-minded people, organize groups on social networks where they exchange experiences and simply show off. Therefore, if you need detailed advice on how to how to make a tank out of paper, master class with photos or even a step-by-step assembly video, then it’s worth finding such a specialized site. If you don’t aim that far, then you can start with simpler models.

The basis for the tank that you see in the photo will be cardboard boxes that need to be covered with colored paper. In order to make the boxes of the correct sizes and proportions, we will make them from matchboxes. For the lower part, you need to glue four matchboxes together; for the tower, one box is enough. We carefully cover all the parts with thin green paper, cutting off any excess pieces with scissors. Glue the tower to the base using glue. Now we roll a tube out of paper, fix the shape with glue and attach it to the tower from the front side. To decorate the tank, we will need black paper, from which we cut out circles - the wheels of the tank, and also make a caterpillar from black paper. We bend a long shelf of paper like an accordion, bend it into an oval and glue it to the sides of the bottom box. By the way, if you want to equip your tank with a rotating turret, then in addition to , you will need a small green plastic cover. We must make a hole in its center, as well as in the center of the large and small boxes. The bolt will be a plastic cocktail tube, one side of which is melted to form a plug. Then, when you string all three parts (small box, lid and large box) onto this plug, the lower edge of the tube is cut off, also melted and securely fixes the structure. Now, when firing, your tank can rotate its turret in all directions.

How to make a modular origami tank out of paper

Will help us with how to make a paper tank, modular origami. It differs from the traditional one in that the figure is assembled not from one sheet of paper, but from many paper modules that are inserted into each other in a certain sequence. Fans of modular origami compare the construction of such figures to assembling a construction set or a complex puzzle. A tank assembled using the modular origami technique, even without gluing, will be strong enough for active children's play.

For a small tank like the one pictured above, you will need about 1,700 green paper folded modules. Detailed instructions on how to assemble the base unit can be found on any assembly website. You need to start collecting with a large circle of thirty modules, then increasing it in height. As a result, you will have a rectangular tank turret. We also assemble the tank tracks on the basis of a circle, but the basis is already fifty modules, that is, the circle is longer, and the width of the tracks is six to seven modules. From ten modules we begin assembling a ball-wheel; at least three such parts are needed. In the end, when you put all the parts together, you will have a nice looking battle tank. A little trick - if you make modules from multi-colored paper, you can create a camouflage color for your tank, alternating the colors of the modules, as if knitting with melange threads.

At the base of the next tank there is a small secret - matchboxes covered with green paper. They allow the structure to have a more strict shape, and besides, the glue will certainly make the craft more durable and will not allow it to fall apart even during active play, which is very important if we want to learn how to how to make an origami machine out of paper.

How to make a tank out of paper - master class

But boys make their tanks not only for play. By carefully, painstakingly recreating the appearance of real military vehicles, albeit in a reduced form, on a scale of 1:100, they improve their knowledge of mechanics and practice drawing. In addition, the process of collecting, and the process of finding information itself, how to make a tank out of paper, master class according to its assembly, it can greatly bring father and son together when the game turns into a real process of learning something new and interesting.

All paper model lovers go through basic stages in honing their skills. At first it is papercraft - when you can buy a magazine or a sheet of thick paper in a bookstore with details printed on the paper. All you need to assemble a beautiful tank is to carefully cut out all the parts and then fasten them together using glue or other recommended methods. The good thing about this method is that you will almost certainly get a beautiful tank that looks as much like the original as possible.

An ordinary white sheet of thick paper gives us more space for creativity. It's like in the cartoon about a box of pencils - a white sheet of paper can turn into absolutely any wonder of the world, you just need to add your imagination. You need to remember that the paper should be thick enough, apply all the “basting” lines with a simple pencil, without tracing, and when you are ready, color it. Cut out the parts after the main coloring so that during this process you do not wrinkle or bend the paper parts. For the most complex crafts, there are articles dedicated to how to make a paper tank, video and photos of each step of implementation, which recognized tank gurus are happy to share with beginners.

The tank has become a popular theme for today's new art of manigami (from the English moneygami - origami made from money) -. This is not only a great way to beautifully give a person the required amount of money, but also a sign of good taste. Although, who knows, maybe if you give such a folded bill to a friend who is into tanks, he will not use the money for its intended purpose, but will keep your beautiful gift.

How to make a paper tank diagram

And finally, let’s imagine, to fully disclose the topic of today’s article - how to make a tank out of paper, diagrams collection, the same papercraft that we already mentioned above.

As you can see, the diagram clearly shows the sequence of parts and where they are attached to each other. The advantages of this scheme are that all the parts are already painted, there is no need to paint them and select colors. The diagram can be printed on a sheet of paper, but make sure that it is not too thin. For work, choose sharp small scissors, which are easier to cut out small parts, as well as medium-sized straight office scissors for parts with a straight, long edge. Take the cutting process responsibly, because a mistake made on any part will lead to the fact that you will have to reprint the entire diagram again.

Tank assembly diagrams can be quite simple. The effectiveness of such a tank, its resemblance to a complex, large model, is achieved through the use of carefully drawn details. The tracks, wheels, parts of the turret and hull of the tank are recreated very accurately. With the help of papercraft schemes, you can play not only tank battles from the Second World War, but also make the newest and most modern models of tanks that are in service in various armies of the world. A child’s passion for collecting paper models does not always develop into a passion for weapons or wars, but it will certainly make him neat, diligent, learn to understand mechanics, and interest him in basic physical processes. By the way, this will be useful for girls too.

Other news

Creating various paper crafts has long been a popular activity among parents and their children. It came from Asian countries, where since ancient times people have improved their skills in origami and making paper figures. This kind of activity can be excellent training for both the baby and the parent.

In the early 90s, psychologists and specialists working with children noted the benefits of this type of activity for children. This is great for developing motor skills. and children's spatial imagination. If kids like to tear and crumple paper more, then older children can instill a love for folding origami, which will later develop into the creation of unique figures using glue, threads and other secondary materials.

Paper crafts develop imagination. In addition, by observing how a simple sheet is transformed into some beautiful model, analyzing the folds of lines and developing in this direction, you can improve your spatial thinking skills, which, of course, is needed in geometry. There were calculations that stated a higher percentage of mathematicians among people who were engaged in paper crafts in childhood.

A voluminous homemade cardboard tank - colorful and quite realistic - is quite easy to make. And making a wedge combat vehicle is no more difficult - the main thing is to carefully study the pictures depicting the desired model, so as not to get confused in the colors and details, and of course, follow our instructions and recommendations step by step.

Very often different models and instructions for making a paper tank with your own hands are recommended for boys. It is not surprising that from an early age one can notice in a boy a young commander who needs an army and equipment for his military strategy. This does not mean that girls cannot create tanks - speaking of this, the child himself can choose the things that interest him. Only interest and curiosity will help you create a truly beautiful and unique figurine.

You should start with the simplest model, which will suit many children starting in this area:

The first tank model is ready! It turns out to be small and can hardly claim originality or uniqueness, but it looks very good in appearance and the baby will probably like it. And most importantly, this model does not require special skills and is not difficult to complete.

Gallery: paper tank (25 photos)

DIY paper KV-1

Making a model of this tank in rows is more difficult and takes much longer than a regular one, but the result is guaranteed to be much more beautiful and consistent with the original. You can find it on the Internet There are countless different ready-made models for making this particular paper figurine, but, naturally, you can try to assemble and create it yourself. It must be taken into account that this model requires a huge supply of nerves and patience, attentiveness and accuracy. KV-1 is usually started by people with some experience.

Making paper tanks is not such a difficult task, as it might seem at first glance. Having enough patience and perseverance, you can not limit yourself to the Tiger or KV-1 models, but go for more complex types of tanks. The main thing is to enjoy the process and rejoice at each successfully obtained model.

With this article you will learn how to make a paper tank with your own hands. This instruction includes 2 options for making such crafts. They vary in complexity and technique. The first master class is quite simple and quite suitable for beginners. The second is labor-intensive and complex. If you don't have any experience with origami, try a simpler one first.

A paper tank sounds quite serious. It seems that making such a craft is very difficult. And this is not true at all! Given some free time and some patience, you can easily create one. Read on and you will learn how to make a paper tank with your own hands.

Materials and tools:

• plain or colored A4 paper;
• gray pencil;
• thin metal ruler;
• PVA or stationery glue;
• scissors.

How to make a simple tank out of paper

This craft is easy to make and perfect for beginners. To make it, you will need one sheet of A4 colored paper, a small piece of paper in a contrasting color, scissors and a pencil.

Production time – 20 minutes
Difficulty level – easy.

Step 1: Make the folds
Take a standard A4 sheet of paper.


Fold it in half lengthwise.


Fold the top left corner to the bottom edge. Iron the folds well and unfold.


In the same way, fold the bottom left corner to the top edge. Expand.


You should end up with cross-shaped folds.

Step 2: Form the Flaps
Place the craft vertically. Fold the right corner down.


Divide the bottom side into 2 equal parts.


Leave the first part in place, and fold the second to the lower right corner.


Repeat on the left side.


At the top in the foreground you should have a regular triangle.


Repeat on the other side.

Step 3: Narrow the Middle
Fold the bottom side towards the center line.


Fold the paper right down the middle and turn it back toward the bottom edge.





Iron all the folds with an iron ruler so that they are even and neat.

Step 4: Form the Tower
Fold the bottom corner of one of the triangles up.


Lift the right one up as well.


Roll the craft into a cylinder with all the formed elements facing up.


Insert the “arrow” inside the square.


Fold the remaining two corners of the “arrow” into the lower pockets so that you get it as follows (see photo below).

Step 5: Add a Muzzle
Take a small rectangle of a contrasting shade.


Roll it into a thin tube.


Insert the tube inside the tower. Ready!

You can also make this tank by watching the following video.

How to make a paper tank with a rotating turret

To create this origami you will need:

• 1 sheet of A4 paper,
• scissors,
• pencil,
• iron ruler,
• glue,
• a thin object for smoothing out small wrinkles.

Production time – 1 hour
Difficulty: medium

Step 1: Form the Undercarriage
Take a sheet of A4 paper.


Fold it in half, and then in quarters. Cut the sheet into 2 equal parts in the middle, that is, into 2 long strips (in the photo these strips are folded in half in width).


Take one of the strips and divide it into 2 parts in width, that is, in fact you should have 2 quarters of an A4 sheet in your hands. Set one quarter aside and work with the other.
Fold the quarter sheet in half.


Expand. Fold the bottom side towards the center line.


Fold the right side towards the center as well.


Roll the craft into a cylinder.


Press this cylinder down.


Bend all corners of the resulting figure by approximately 0.5 cm.


Fold all the corners inside the shape.

Use a metal ruler to smooth out the folds to make them more pronounced.


Fold the top flap towards the center of the figure.


Repeat on the other side.


Lift the right semicircular pocket at the bottom slightly. Make it longer.

Repeat this on all 4 sides.


Tuck the outer flaps on both sides to the highest point.


Turn the craft over. Fold the corners up approximately 0.5 cm.


Repeat on all 4 sides.


Fold the folded corners back down.


Place the side elements perpendicular to the axis.


Using the previously folded folds, bend the craft upward along its perimeter.

The chassis is ready.

Step 2: Make undercarriage protection
Take the second quarter of an A4 sheet.


Fold the top edge about 0.6 cm, then fold it over again. You need to wrap the paper in one direction 2 times. When folding, it is convenient to use a metal ruler.

Repeat on the opposite side.


Place the protection on the chassis. The width of the first should be approximately 0.1-0.2 cm longer than the second.


Fold the extreme corners along the folds on one side by approximately 0.5 cm.


Fold the corners inward along the curved lines.

Iron the folds with a ruler.


Tuck the outermost element up so that the “horns” stick out to the side.


Turn the craft over and insert the chassis into it. The latter should fit comfortably and tightly into the protection.


Draw a line with a pencil for the second edge of the protection.


Fold the paper inward at the marked point.


Fold the corners on the second side of the protection approximately 0.5 cm. Fold the corners inward along the marked folds.

Fold the rear flaps down, reducing their width by approximately 2 times. Make them longer.


Repeat on the other side.


Take protection and chassis. Put the first one on the second one and check how well they fit together. If necessary, correct minor defects by lengthening or shortening the protection accordingly.

Step 3: Make the fixing element
At this stage you need to make a fixing element for the chassis and protection on which you will put the tower. Also, with its help, the tower will be able to rotate in different directions.
Take the second half of the A4 sheet.


Fold the right edge towards the center line. Unbend.


Cut a quarter of this piece along the folded line.


Fold the paper in half lengthwise and mark creases along the edges.


Fold both edges towards the center along the marked folds.


Fold the corner down on the right.


On the opposite side, also bend the corner so that you get a triangle in the foreground.


Expand. You should end up with cross-shaped folds.


Fold the side flaps inward along the marked folds so that you have a triangle in the foreground.

Fold the left corner from the bottom side up.


Repeat on the other side. You should have the following figure.


Fold the bottom side towards the center line.


Fold the top side towards the center as well.


Place the craft on the chassis so that the square element is exactly in the center.


Next, you begin to bend the figure around the chassis. Make sure that it follows all the contours of the element placed inside.


Wrap the craft around the chassis completely. Trim off any excess length.

Insert one edge of the element into the other so that the square is located at the top at the center point.




————————————————-
Disconnect the fastening.

Place the guard on top of the chassis.

Wrap these parts again with an element with a square at the top. Some actions will be quite difficult to perform, but do not rush, act carefully and you will succeed.

The lower part of the tank is ready!

Step 4: Make a Tower
Cut out a square with a side of approximately 6-7 cm. Bend it along both diagonals.

Fold the paper in half.

Fold the corners down to create a perfect triangle.

Turn the figure over.

Fold the left corner towards the top.

Repeat on the other side.

Rotate the craft. Fold the side corners to the center line so that they are slightly shifted upward.

Insert the lower flap on the right side into the pocket located at the bottom of the side flap.

Insert the right flap into the pocket as well. It should look like this.

Turn the craft over.

Lift the inner pockets slightly upward.

Turn the pocket slightly outward.

Repeat on the other side.

Fold the top corner down. You have made the base for the tower.

Step 5: Make the Turret Guard and Muzzle
Cut out a piece of paper measuring 8 cm x 6 cm. For this work, you can use paper of the same shade that you previously used or use a contrasting color. We used a different shade and it really looks cute! If you use different shades of paper for each element, it will look original and fresh!

Fold the piece in half in width. Next, you need to fold this paper in three along the points indicated by the arrows in the photo below.

Here the paper is already folded in three.

Open one spread. Fold the lower left corner from bottom to top. In the same way, symmetrically fold the right corner to the top. Pull the middle up and fold the craft in half. Gently pull the inner valve upwards.

Unfold the craft.

Decorate the third part on the other side of the craft in the same way.

Make sure that the internal valves are placed symmetrically.

Take your tower.

Insert one edge of the green guard into the inner pocket at the top of the tower.

From the bottom side, insert the protection into the inner pocket at the bottom of the tower. Cut off the excess length of the protection.

Fold the cut corner into the middle.

Place the defense on the tower and secure both elements. If necessary, use a little glue.

Cut a small rectangle to fit the circumference of the tower.

Roll it into a thin strip.

Bend one end of the strip perpendicularly and fold it in half to form a small triangle at the top.

Insert this end inside between the green guard and the tower.

Wrap the strip around the tower. Insert its other end on the other side of the protection. If necessary, secure the work with glue.

Roll a tube from a thin piece of paper and secure with glue. This will be the muzzle.

Place the turret on the chassis. To do this, insert the square located at the top of the chassis into the internal pockets at the bottom of the tower.

Place the barrel inside the tower and secure it with glue.

The work is ready!

We tried to tell you in as much detail as possible and show you the technique for making this tank. But if you still have questions and you don’t fully understand how to make this paper tank correctly, watch the following video.

2. You should have a fold in the shape of the letter X at each end of the rectangle. Now you should form each corner so that the result is a multi-layered triangle. To do this, you need to fold each of the two inner corners to the center of the letter X, bring the corners together and press them in a little.

3. For the second end of the rectangle, repeat the same steps. This should be done from the “wrong” side so that a double-sided arrow with sharp ends is ultimately formed, but these ends should be located in opposite planes to each other.

4. Bend the corners of the upper part of the “arrow” so that a diamond is formed on one edge, which is made up of two corners.

5. Bend one of the corners on the opposite side so that it connects with the bottom, and bend its edge upward. You will have a flap that needs to be bent in the opposite direction. Repeat the same action with the other corner. On this side, you will also end up with a diamond shape.

6. Place the product with the wide side facing you, lift its side parts and insert one part into the other. An arc is formed with paper valves attached to the top. The formed arc is your paper tank, at the top of which there is a real “tower”.

7. The tank is almost ready. All that remains is to add tracks and a muzzle (gun) to it. The missing parts are quite simple to make: bend the side edges of the tank and form tracks from them. To make a paper muzzle, roll up a tube and insert it into the hole in the “turret” of the tank.

Now the paper tank is done!

Also watch the video on how you can make other tanks out of paper!

If you use the knowledge on creating paper tanks from this article, then you will definitely succeed. Happy paper tank making!