Do-it-yourself panel made of jute threads. Jute filigree master class: Panel "Underwater world". How to make a jewelry box using jute filigree? Photo of the beautiful work of an experienced master Sergey Shevchenko

With the help of jute filigree, you can create beautiful patterned crafts, lampshades, panels, boxes and more, while they look so unusual and elegant that it is impossible to look away!
The most pleasant thing about this relatively new type of needlework is that jute filigree does not require any special expensive devices and materials, all of which are available to anyone.
The main material is jute cord. Agree, it is not difficult to buy a reel. And if the idea involves working in color, then it can be painted in a variety of colors with acrylic paints. In addition, you will also need tweezers, a thin knitting needle, transparent Titanium glue, although regular PVA, an awl and scissors will do. Well, if you are a beginner, then you will need stencils of patterns. They can be made by hand or purchased at any of the needlework stores.
In order to start working in this technique, you first need to decide on the pattern. Let these be the most uncomplicated drawings, but clearly drawn. To do this, you can make a sketch yourself or use a ready-made one. Next, this drawing must be placed in a transparent plastic file.
Along the entire contour of the sketch, you need to carefully apply glue, and lay a jute cord on top. Many craftsmen apply glue not to the sketch, but directly to the jute, which is carefully twisted with tweezers and placed on the adhesive base. With a thin knitting needle, the thread is straightened according to the pattern. In this way, you can work on the entire field.

After filling in the sketch, the work needs to be dried. To do this, it can be placed under a press and left to dry for about 6 hours. After that, using a knife, carefully separate the future product from the base and varnish it.
The finished work may consist of several parts, which are then combined into one whole. Also, jute filigree can be supplemented with other decorative elements: beads, rhinestones and many others, all this is also attached to the sketch with glue.


And here is the idea that just captivated me. For the base of the lamp, a blue glass bottle decorated with acrylic paints was used, and the lampshade was made with openwork filigree.


Looking at this master class, I understand that I have never seen such a beautiful napkin holder!


Another great example of a lamp. The work was used natural and bleached jute. The base is decorated with jute twigs and swirls, marbles and imitation pearls.


A great idea for lovers of cozy tea drinking. Why not decorate your kitchen with such an unusual decorative element!


And with the help of jute filigree, you can make hair ornaments. Beautiful, isn't it?

A panel in this technique can be a great addition to your room. Of course, the creation of such a picture will take a lot of effort and time, but the result is clearly worth it!



And you can see the whole process of working in this unusual, but very beautiful technique by watching this video.

I wanted to make one picture, only from colored twine. I've had this picture on my wishlist for a long time. Here I made it!

We will need:

• scissors,
• sample,
• glue Titanium,
• twine plain, bleached and colored,
• stain of different colors.

I have Walnut for gray, Mahogany for red and pink, Larch for red and Oak for brown. We make pink and red from bleached twine, the rest from ordinary twine. For a minute, dip the twine in the stain, rinse, wring out and dry.

Here is the template. I made the picture as a team as a constructor, each detail separately, and then assembled it into a picture.

First we make sand, it is waves. I used regular and brown twine. We lay out the pattern as if there are no shells and algae.

That's how it happened.

Then they peeled off the template, removed the excess glue with a hot knitting needle and put it aside. We started making starfish.

Here she is. First the contour, and then we fill it.

From below we pass with bleached twine and from above round growths (or whatever they have).

While the starfish is wet, bend it.

Now the shell, first the contour with bleached twine, then we make the shadows with red twine, then we fill in pink and brown growths on top.

Sea sponges. I make the contour of the hats of bleached twine double, so it turns out more voluminous. The sponges themselves are made of gray twine.

Something like that. We make each part separately, separate it from the template, remove excess glue and set it aside.

Here is such a flower. I don't know what it's called.

The outline is red, fill it with pink and circle in the center. We bend too.

Now here is a shell. Outline of bleached twine.

Here you can see the volume of the flower.

Then at the shell we make shadows with red twine.

And fill it with pink. And also bend.

Now algae. First the contour, then we fill it.

And while it is wet we bend it.

This is how we leave it to dry. When dry, remove to the side.

There's a double weed here.

And here are some more algae. Cut the same short segments, make the edges sharp and bend them in half. And we coat the long rope with glue, bend it and glue the processes to it.

But it is best not to glue them together right away, but to glue the processes to the algae already in the picture itself.

Now let's make rocks. Fold a snail of brown twine and use your fingers to give the desired shape.

Then we remove it from the file and put the pebble on the finger bone and press it in, we get a convex pebble.

And so the rest of the stones.

And finally we got to the fish. Also, first contour with bleached twine.

And we fill it with multi-colored twine, and a small openwork on the gills and tail.

They removed it from the file, removed the excess glue and bent it as it should.

Here is the second fish. In some places, it was passed along the contour a second time for volume.

And the third fish.

Now we make a grid. To do this, I took a thinner twine.

Here I already trimmed the mesh, removed all the deprivation.

I started making corals, but I realized that I couldn’t bend it with twine, it wouldn’t be beautiful, there were too many zigzags. That's why...

I decided to make corals from dyed millet! Their texture is just like small balls.
I dyed the millet red. To do this, she poured millet into a bag, added red gouache, tied the bag and mixed it. Fast and clean hands.

Now I took the Titan and squeezed it out according to the coral pattern.

Here the glue is just visible, the main thing is not to go beyond the contour !!!

They fell asleep completely.

They pressed it a little on top and immediately shook it off, where the millet was glued!

And here is another thread.

And now, for greater strength, I go through the top with PVA glue.

So the whole branch is missed, I do the same with the other. Left to dry overnight.

And in the morning I began to separate it from the file, first with my finger.

And then she helped with a knife.

Everything came off very easily, turned it over and left it to dry.

Now we make a flower that is on the coral. Again outline with bleached twine.

Then fill with pink and a circle in the center.

We make volume. On the palm and press the center.

Now the second layer of the flower, outline with pink twine.

Glare from bleached twine. Everything else is filled with pink.

Separately, I made several petals from red twine and added to the flower. Each petal is bent.

Well, all the details together, it remains to assemble the picture.

Separately, we make a pano and a frame.
We make the base from a three-layer cardboard and a little more than a template by 2-3 cm, because. the frame will lie on the base and slightly go beyond it. From the same cardboard we cut out the slats and wrap them with twine.

We cover the base with a self-adhesive film. Reiki is also ready.

We collect our picture, observe the layers, what follows.

I have already collected almost everything, it remains to launch fish into our aquarium.

And here they are. Made bubbles with glass pebbles. It's become much more fun!

Now we need to decorate the frame. I made a lot of leaves like this. Everything was worn out, it was the most difficult, or rather the most boring part of the work.

We bend and glue them on the frame, do not touch the edges yet, all the leaves are located in the center.

Here the rails are ready, it remains to connect them.

This is how we connect the corners.

And cover them with leaves.

And here it is already hanging in place!

Let's spin, turn and turn around!!!

Closer left corner.

Right. Here and a small starfish hid.

Bottom right corner.

And bottom left.

The whole bottom is whole.

Top.

A flock of fish.

Flower closer.

And the seabed is closer. These are sponges.

Starfish.

Another shell.

Here I want to show the scope of the picture.

Algae, I like them very much, well, they are alive.

Maritime network closer.

And each fish separately.

Here is a corner with a starfish. The junction of the rails is almost invisible in the photo, and if you look at the whole, it is not noticeable at all. She put a bead in several shells, like a pearl.

Another corner.

Well, once again, the whole work entirely!

The wall is still empty, but who knows.

Bottom view.

And again, all the work entirely!

The Jute Filigree technique involves the creation of light and elegant crafts from twine or a thick cord. The techniques of filigree jewelry technique came to this art from the weaving of twisted wire.

Jute filigree involves the creation of light and elegant crafts from twine or thick thread

Working with natural thread is so pleasant that it immediately attracts young and beginner needlewomen. Simple tricks and a simple algorithm of actions allow you to quickly master this magnificent old technique.

Before starting the creative process, you need to stock up on simple and affordable materials:

• twine or any thick thread;
• transparent glue "Moment" or "Titanium";
• PVA glue for processing;
• scissors;
• tweezers;
• acrylic paints or acrylic varnish.

Stencils serve as the basis for filigree work. They can be drawn, relying on your own imagination or printed from the Internet. The sketch should be drawn with clear black lines on A4 white paper and placed in a transparent file.

The oilcloth will serve as the basis on which all the details will be glued. After processing and drying, the openwork craft is easily separated from the oilcloth base.

To make a simple jute napkin, you need to draw two patterns: a circle with a diameter of 5-6 cm and the outlines of a future craft.

Work begins with the twisting of the "snail". A small loop is created and new circles are wrapped around it. A small amount of glue is squeezed onto the template, and the folded circle is placed on the file.

Important! To complete the work, the jute thread is always cut obliquely with scissors.

The tip is carefully glued and merges with the common workpiece.

The next step is the manufacture of an openwork base. Glue is applied along all the contours of the template and threads of the desired length are placed. It is convenient to work with narrow tweezers or fingers. To keep your hands clean, it is advisable to use wet wipes!

When all the threads along the outer and inner contours are glued, you can proceed to the manufacture of fastening "snails".

These small circles of thread folded in a circle will connect the openwork details of the napkin. The finished craft should be carefully smeared with a solution of PVA glue with water (1 to 1).

After the blanks have completely dried, they must be separated from the file and glued together.

If desired, the needlewoman can paint the napkin with acrylic paints. Gold or silver colors are ideal.

There are a lot of patterns for making openwork napkins and coasters. The main thing is to approach the creative process with soul and indefatigable imagination.

Gallery: jute filigree (25 photos)

Jute twine filigree: a master class and lessons from the masters of making an openwork vase

The art of jute filigree attracts not only young needlewomen, but also young guys with a creative streak. A master class on making an elegant twine dish is presented by a novice master from the Belgorod region Vladislav Trush.

For work, he uses a glass base vase and cling film, on which he will apply elegant openwork patterns.

The base dish is covered with a transparent film, in the center it is abundantly smeared with glue, and the laying of the thread begins with a traditional snail. For convenience, the master holds the workpiece with sharp scissors and cuts off the oblique ends with them.

The next step is the formation of "droplets" around the central circle. The master cuts 10-12 threads of the same length from the ball and puts neat petals on the glue.

In the same way, internal droplets are laid out in a circle, and the pattern is more saturated and rich.

To fix the structure around the entire circumference of the workpiece, 3-4 rows of jute thread are planted on the glue.

The next stage of work is the formation of the second circle of petals. The master decided that they would have an inclined broken shape and consist of 3 decreasing droplets.

In the empty spaces between the curls, the young craftsman places small snails, which will have a fastening and decorative function.

The master carefully coats the finished work with PVA glue diluted in water. Allows it to dry completely, gently peels off cling film and excess glue, and then decorates with golden acrylic paint.

An elegant vase for strawberries is ready! A young novice master can make a great gift for March 8 for his mother or for his girlfriend with his own hands.

Jute filigree from threads, twine or ropes: step-by-step instructions for making a napkin holder

The art of jute filigree is based on laying natural threads in snails, drops and curls. They can be fixed to the surface with glue, then separated from it or remain in the form of decorative elements on the original basis.

New schemes for work are offered by an experienced needlewoman with experience. Based on its stencils, you can make an original openwork napkin holder.

The art of jute filigree is based on laying natural threads in snails, drops and curls.

Craftswomen use glass pebbles, rhinestones and twine thread of different colors in their work.

To make a napkin holder in the form of a chestnut leaf, you will need hanks of gray-green and emerald shades, as well as brown pebbles for the legs and the central “nut”.

According to the prepared scheme, placed in a file, the needlewoman lays out the threads, generously lubricating the base with transparent glue.

The inner veins of the leaf are made with a gray-green thread, and the contours are beautifully decorated with bright emerald twine.

On a note! Jute of any color is available for sale, but the master can always change the shade of the thread to his liking. To do this, it is desirable to paint it before starting work, completely dipping it in high-quality acrylic paint.

All leaves of the back wall of the napkin holder are made in the same way, at the base they are fastened in circles on both sides of the workpiece.

The next step is to make the front wall of the napkin holder. The detail is made according to a small scheme with the placement of a central stone on a round base.

To connect the walls of the napkin holder, you need a reliable base. They serve as a wooden blank of 4 sticks, wrapped in jute thread.

2 openwork details and 4 small legs are securely attached to a dense base. It turns out a magnificent napkin holder for festive family feasts.

How to make a jewelry box using jute filigree? Photo of the beautiful work of an experienced master Sergey Shevchenko

Jute filigree is made up of simple patterns in the form of the letters "C" and "S", as well as filling empty spaces with snails and figure eights.

To make a rope box, you will need: a base box, oilcloth, jute twine, glue and a good creative mood.

The progress of painstaking jewelry work in the following stages of the creative process:

Prepared stencils are glued onto the base cardboard box, and all sides are covered with a protective film.

With the help of liquid glue, beautiful curls, circles and contour entanglements are fixed. When all the blanks are dry, they can be separated from the base and, if desired, painted with acrylic paint.

The bottom of the box is formed by laying the thread on the sides of the square. The twine is immediately placed on the glue, wrapped in one direction until the entire space from the corners to the center is filled.

For beauty and density, the bottom can be reinforced with circles and connecting rays.

In addition to the decor, the master decided to line the box with soft red velvet details, added pearls and white rhinestones. And as a fastening mechanism I used small door hinges.

The result exceeded all expectations! It turned out a magnificent box, which will be a chic birthday present for your beloved wife.

Making an original gift: a butterfly in the technique of jute filigree

In the eternal search for ideas for gifts, you can stop at making beautiful butterflies using jute filigree technique. For such a presentation, you need a minimum of material and 30-40 minutes of free time.

In the eternal search for ideas for gifts, you can stop at making beautiful butterflies using jute filigree technique.

1. To make the butterfly bright, it is advisable to use threads of different colors and add beads and glass pebbles as decor.
2. On the finished template placed in the file, it is necessary to apply liquid transparent glue and carefully lay out the flexible twine threads.
3. Where the sketch lines are thick, you will have to glue 3-4 short strips of jute.
4. The color scheme of the butterfly is chosen according to the taste of the needlewoman.

The black dots in the diagram are decorated with small twisted snails; in addition, they can be decorated with pebbles or flat beads.

The body of the insect is formed by oval bases, on which large brown rhinestones are glued. After treatment with PVA glue and complete drying, the craft can be easily separated from the oilcloth base.

Bright butterflies can serve as an independent decorative decoration or be placed on any fabric, wooden or metal base.

Feather of the Firebird: a talisman for happiness from jute thread

Skillful home needlewomen are real dreamers and inventors. From ordinary twine, they can make beautiful talismans for happiness and good luck.

A simple example is the feather of the Firebird. It will take a small skein of twine, a little transparent glue and a couple of beautiful pebbles to create it.

First, as always, you need to make a sketch and place it in a transparent file. Apply glue along the contour of the pattern with a thin stream and carefully lay the jute thread, cutting off the oblique ends.

To place a glass pebble in the center of the pen, it is necessary to make a base for it - a round snail from a working thread.

It is advisable to additionally lubricate the ends of a natural thread with glue, then they will not be frayed and will neatly hide in the work.

Those bends in the picture that will be decorated with rhinestones need to be reinforced with 2-3 strips of jute.

The finished work must be carefully smeared with diluted PVA glue and set aside for 1-2 hours.

On a note! When the craft is completely dry, it must be separated from the base, remove excess glue with a hot soldering iron, a heated screwdriver, or simply cut with scissors.

An original talisman in the form of a Firebird feather can decorate a coffee table, a mirror in the hallway, a kitchen cabinet or a wall above the bed.

Jute filigree is a simple and fascinating technique, you can download diagrams and pictures on the Internet for free. It does not require special knowledge and special schemes. You can even use children's coloring pages as templates for making original crafts. After mastering the simplest patterns in practice, you can easily switch to creating complex paintings in openwork filigree technique.

Dish or tray in jute filigree technique: master class (video)

Galina

after the product is ready, how can I remove the glue so that it is neat?

Galina

Can you tell me how to remove the glue residue from the product?