Make a tank out of cardboard that shoots. Craft a tank made of colored paper. Step-by-step instructions for assembling a megatank

We make a tank out of cardboard with our own hands

In order to create a vehicle, only in a reduced version, not so much is required. Almost anything can be recreated from those materials that are always at hand, and a little more time, patience and imagination. A good example of such a simulation is making a cardboard tank, which is used for packaging various goods. This can be a great option for spending a day off with the kids. They will certainly be happy, because children bring joy to any activity that can be done with adults.

Necessary materials

As mentioned above. To create a tank model, you will need very simple materials, namely:

Packing cardboard.
Stationery scissors.
Ball pen.
Small line.
PVA glue.
Scotch, where without it.

When all the materials are prepared, you can get down to business.

First: first, on a small piece of cardboard, you need to draw all the main components of your future tank and then carefully cut them out. There are a lot of small parts, so it's better to draw them and cut them out right away. First you need to make two strips of cardboard measuring 20x1 cm, then two more strips of 10x1 cm and 8 small circles. They are easiest to make from 1x1 centimeter squares.

Second: what was done at the first stage is the tank tracks. To give them the appropriate shape, you should take these strips and fold them into an oval shape, fix their ends with tape, so they will hold. Shorter strips must be glued to one of the sides of each caterpillar with glue. You will have to hold them for some time until the glue grabs. When both parts are glued, you can cut off the excess cardboard.

Third: it's time to glue the cut out circles. On the empty side of your ovals, carefully glue the circles, after smearing them with glue. You need to place them at the same distance, they play the role of wheels.

Fourth: it is necessary to make the following parts of which the tank will consist, for this you need to cut out two rectangular pieces of cardboard 5x7 centimeters in size, two strips 5x0.5 centimeters and one strip 5x1 centimeters.

Fifth: glue the caterpillar parts of the tank to the long sides of one of the prepared rectangles, after lubricating them with glue. Glue one wide strip to the back of the tank, and two thin ones in front. Thus, it turns out the bottom of the tank with caterpillars, you need to glue the second rectangle on top. It turned out the finished lower part - the base.

Sixth: to make the top of the tank, you need to cut out one 5x5 cm square, one 5x1 cm rectangle and three 5x0.5 cm strips from cardboard .

Seventh: on three sides of the square you need to glue three corresponding stripes. Then glue what happened to the finished part of the tank with glue. The part that remains open must be sealed with a strip larger in size at an angle. Empty triangles are best sealed with cardboard of the right size.

DIY cardboard tank photo

Eighth: you need to make a tower for the tank. To do this, prepare the following parts from cardboard: rectangles with dimensions: 4x1, 3.5x2.5, 3.5x1 centimeters one by one, two rectangles whose dimensions are 2.5x1 centimeters, one trapezoid figure made from a rectangle measuring 3.5x1 centimeters.

Ninth stage: you need to glue the trapezoid part to the largest rectangle, and glue two identical parts on the sides at an angle of 90 degrees. The parts that are left need to be used to close the rest of the elements.

Tank model is ready

Tenth stage:

Watch a video on the topic: Do-it-yourself Tiger cardboard tank

Model of tank ready. Many stages can be easily entrusted to a child, so the lesson will not only be useful, but also develop the motor skills of children's fingers. See useful crafts at.

All the guys love to manage toy military equipment - invent plans of operations, send soldiers on reconnaissance, take out tanks to certain positions. Most often, these toys are purchased, interesting, expensive, but often broken in children's hands. And if your child started a large-scale battle, and the toys were missing - work with the kid and explain to him how to make a tank out of paper with your own hands.

Plain paper tank

Beginners should try to make a tank. With your own hands, you can try to make a standard model.

To do this, you will need a piece of plain A4 paper.

Step-by-step instruction:

Such instructions will help you understand how to make a paper tank with your own hands. Most often they like to make the KV-1 tank out of paper, but it is very difficult for children, so you should start with simple crafts that you can do with your baby.

Cardboard craft

Many want to create a tighter tank and are interested in how to make such a toy out of cardboard or strong paper. The basic manufacturing procedure, of course, each person can have his own. In addition, the technique for creating some models will not be clear to a beginner. But this model of a tank made of cardboard will be within the power of any person, even those who have no experience.

Detailed job description

Detailed step-by-step instructions will help you cope with any task. You can create a tank from thick paper or cardboard as follows:

That's it, work completed. Similarly, you can make a Tiger tank out of paper. Having learned to build standard machines, you can try more complicated design. Having made a cardboard tank in the form of the first toy, the boy will move on to the next craft. It can be not only certain types of armored vehicles, but also motorcycles, mopeds, jeeps, vans, helicopters, planes and airplanes.

Who knows, maybe in a few years the kid will become an engineer of real sea vessels. or large spacecraft. And it all started with an ordinary toy, which in appearance looked more like a simple box, and not a model of military equipment. Therefore, it is necessary from childhood to instill in children the ability to think correctly and develop the desire to bring their fantasies to life.

A very impressive paper craft - a five-gun megatank (Megatank) from the game Advance Wars for game console Nintendo D .The tank looks very formidable and the motives of Soviet tanks can be traced in its design. For example, the T-28 tank (three turrets) and, probably, the main prototype, the five-turreted T-35 tank. Treat with understanding the presence of crafts of three guns in the main tower. In Advance Wars, this tank had exceptional firepower. See how to make such a paper tank with your own hands. A template and detailed step-by-step instructions with photos and videos are attached. Such a home-made megatank is a good alternative to a souvenir or a gift bought in a store, for example, for February 23 or the day of the tanker.

How to make a MEGATANK out of paper with your own hands

The Mega tank craft is several times more difficult to make than a simple one due to the presence of a large number of small parts. To work, you will need the following tools: scissors, a stationery knife, a ruler, a pen with empty paste, paper glue. According to pasting experience, it is better to have three types of paper glue on hand - glue stick, PVA glue and synthetic transparent glue.

A four-sheet paper megatank template can be downloaded from the author's website Ninjatoes papercraft (archive) or in the format pdf. The model presented below is printed on four A4 landscape drawing sheets, if possible, you can duplicate the printing of sheets No. 2-3 of A4 size on office paper (this will simplify the assembly of the smallest details). I admit that the megatank model will be even more spectacular if it is printed on A3 sheets.

Please note all details are numbered. The numbering supports the assembly sequence, which is very convenient. Almost all places of gluing parts to each other are marked. Based on assembly experience, I recommend that you follow this sequence, that is, if possible, cut out the part, assemble it and glue it in place. This will reduce build errors.

Sheet 1. Megatank

Sheet 2. Megatank

Sheet 3. Megatank

Sheet 4. Megatank

The dotted lines indicate the lines of paper bends away from you, and the dots indicate the lines of bends towards you. The pictograms "scissors" indicate areas for cutting. The places of the cuts are indicated by a line with arrows at the ends. All dotted lines must be traced with a blunt object using a ruler or manually (use an empty ballpoint pen). It is better to do this before cutting out the details of the megatank from the template. Before gluing, the parts must be bent along the lines. Parts are shaped for assembly, if necessary, bent more strongly, twisted so that the springing effect of the paper during gluing is minimal. Make sure the glue is dry before installing the glued parts. The most time-consuming work will be when assembling parts from sheets No. 2 and No. 3. If you organize an assembly team, then three people will assemble this tank in one evening.

Step-by-step instructions for assembling a megatank

Step 1. All the details of sheet No. 1 are cut out and formed. Don't forget to make four cuts in the piece.

Line cutting

Hull details

Step 2. The bottom (part 2) is glued to the top cover of the case (part 1).

Step 3. The side walls are glued to the body with their own hands (details 3-4). See photo.

Step 4. The axis of rotation of the tower is glued to the body (detail 5). Two lamellas are inserted into the slot, and the bent petals are glued.

Bonding the sides of the body

Attaching the superstructure

Step 6. Glue the axis of rotation of the turrets by analogy with step 4 (parts 11 and 21).

Step 7. We begin to assemble a small turret (parts 12-14). We glue, but do not glue the top cover of the turret (part 12). We glue part 13 and glue part 14 inside.

Step 8. We glue part 13 into the turret with 12 lamellas down, center the part relative to the hole with a ballpoint pen.

Step 9. Insert the turret into axis 11. The turret should rotate on the axis. we insert the first washer 15 inside onto the axis. We bend the lamellas of the axis 11 outward and glue them to the washer.

Step 10. Glue the second washer on top of the washer 15. The turret must rotate! Glue the top of the turret.

Turret assembly

Step 11. Glue part 16 to the turret. We glue the cannon 17 and glue the black insert 18 inside.

Step 12 Glue cannon 17 to the turret. We glue the head 19 and the helmet 20 of the tanker.

Step 13. Glue the helmet 20 to the head 19 and glue the tanker to the turret. By analogy, we collect the second turret (details 21-30).

Turret cannon

Step 14. We assemble a large tower (part 31), glue the bottom sector into the tower (part 32).

Step 15 Assemble the bottom of the tower. First, we glue a narrow strip to the lamellas of the bottom part with a hole. Then we glue the bottom to part 32, do not forget to fill the end petals of a narrow strip inside the tower.

Step 16 Install the turret on the hull. And by analogy with the installation of small turrets, we glue two washers (parts 33) onto the axis. The turret must rotate.

Step 17. We glue the part of the sight 34 and the part 35 of the hatch cover of the megatank inside the tower with our own hands.

Step 18. Glue part 36 of the periscope and ventilation shaft 37 to the tower.

Step 19. Glue part 38 to the tower. Assemble and glue the right cannon (parts 39-40), the central and left cannon (parts 41-44).

Step 20 Assemble the tank commander. Part of the torso (detail 45). Right and left hand, details 46-47 and 48-49 respectively. Glue head 50 and helmet 51. Glue the pieces together.

Step 21 Glue the commander figurine into the hatch of the tank.

Today, no one is surprised that not only guys, but also girls are actively interested in how to make a tank out of paper. Passion for paper models or just the desire to make a pleasant surprise for your child or beloved man pushes the girls to such a feat as assembling a paper tank. Believe me, even the simplest model will surely hit your favorite "tanker" in the heart.

The widest selection of templates and layouts of paper tanks, of course, on Aliexpress:

How to make a paper tank quickly

A men's holiday, whether it's a birthday, the day of all the military - February 23, or the professional holiday of all tankers (by the way, the second Sunday of September) - an occasion to create a postcard with your own hands depicting, of course, a tank. How to make a tank out of paper quickly if you don’t dare to make more complex products than?

We offer you such a version of the holiday card. To create it, you will need green colored paper and old postcards for. On the back of the postcard, put a picture of a tank, its complexity will depend on the level of training. It is enough for a kid to cut out the simplest silhouette of two ovals, and you can cut it out very similar to a real tank. Separately cut and glue the muzzle of the tank, decorate the appliqué with images cut from old postcards. In order to give relief to the postcard, the technique of groats application was also used. PVA glue is applied to the lower edge of the postcard, and, without waiting for the glue to dry, the surface is sprinkled with small yellow grits. Shake off the excess from the card when the grains stick. You can make green grass instead of “sandy” soil from cereals by gluing finely cut strips of green colored paper on PVA, which is left over from cutting out the tank.

While this next small tank may seem simple to you, it assembles in just a minute and is perfect for stormy tank battles on the nursery floor. To assemble such a tank, you will need a strip of plain A4 paper. From one sheet you can get two or three tanks for your division. With scissors, carefully cut the sheet lengthwise into strips. We bend the corner of each strip in such a way that first the right and then the left corner are bent, forming an X-shaped fold. Using it, we bend the edges, getting an envelope from each edge. It remains only to connect the edges together in a circle, insert the muzzle glued from a small piece of paper and draw identification marks on the tank and you are ready.

How to make a tank out of paper step by step master class

For more complex models, the tips in addition how to make a paper tank step by step tutorial included necessarily. After all, such tanks already contain many small details that can only be developed independently after years of training.

Real professionals in assembling tank models from paper are happy to share their works with like-minded people, organize groups on social networks where they exchange experiences and just show off. Therefore, if you need detailed advice, how to make a tank out of paper, a master class with a photo or even video assembly step by step, it is worth finding such a specialized site. If you don’t aim that far, you can start with simpler models.

The basis for the tank that you see in the photo will be cardboard boxes that need to be glued with colored paper. In order to make the boxes of the correct size and proportions, we will make them from matchboxes. For the lower part, four matchboxes must be glued together, and one box is enough for the tower. We carefully glue all the details with thin green paper, cutting off its excess pieces with scissors. Glue the tower to the base with glue. Now we twist the tube out of paper, fix the shape with glue and attach it to the tower from the front side. To decorate the tank, we need black paper, from which we cut out circles - the wheels of the tank, and also make a caterpillar out of black paper. We bend a long shelf of paper with an accordion, bend it into an oval and glue it to the sides of the bottom box. By the way, if you want to equip your tank with a rotating turret, then in addition, you will need a small green plastic cover. We need to make a hole in its center and also in the center of the big and small boxes. A plastic straw for cocktails will act as a bolt, one side of which is melted to obtain a plug. Then, when you string all three parts (a small box, a lid and a large box) onto this plug, the lower edge of the tube is cut off, it is also melted and securely fixes the structure. Now, when firing, your tank can rotate its turret in all directions.

How to make a modular origami tank out of paper

Help us in how to make a paper tank, modular origami. It differs from the traditional one in that the figurine is assembled not from one sheet of paper, but from many paper modules that are inserted into each other in a certain sequence. Fans of modular origami compare the construction of such figures with assembling a designer or a complex puzzle. A tank assembled using the modular origami technique, even without gluing, will be strong enough for active children's play.

For a small tank like the one pictured above, you will need about 1,700 pieces of green paper. Detailed instructions on how to fold the base module can be found on any assembly site. It is necessary to start collecting with a large circle of thirty modules, then increasing it in height. As a result, you will get a rectangular tank turret. We also assemble the tank caterpillars on the basis of a circle, but fifty modules are already laid as the basis, that is, the circle is longer, and the caterpillars are six to seven modules wide. From ten modules, we begin to assemble a ball-wheel, we need at least three such parts. In the end, when you connect all the details, you will have a nice battle tank. A little trick - if you make modules from multi-colored paper, you can create a camouflage color for your tank, alternating the colors of the modules, as if knitting with melange threads.

At the base of the next tank there is a small secret - matchboxes covered with green paper. They allow the design to have a more rigorous shape, besides, the glue will surely make the craft more durable and will not let it fall apart even with active play, which is very important if we want to learn how to how to make an origami car out of paper.

How to make a paper tank - master class

But after all, the boys make their tanks not only for the game. Carefully, painstakingly recreating the appearance of real military vehicles, albeit in a reduced form, on a scale of 1:100, they improve their knowledge of mechanics and train in drawing. In addition, the process of collecting, and the process of finding information itself, how to make a tank out of paper, master class on its assembly, it can be great to bring father and son together, when the game turns into a real process of learning new and interesting things.

All lovers of paper models go through the main stages in honing their skills. In the beginning, this is papercraft - when you can buy a magazine or a sheet of thick paper in a bookstore, with details printed on paper. All you need to assemble a beautiful tank is to carefully cut out all the details, and then fasten them together using glue or other recommended methods. This method is good because you will almost certainly get a beautiful and as similar to the original tank as possible.

More space for creativity gives us an ordinary white sheet of thick paper. It's like in a cartoon about a box of pencils - a white sheet can turn into absolutely any wonder of the world, you just need to add your imagination. It must be remembered that the paper should be thick enough, apply all the “basting” lines with a simple pencil, without pointing, and when you are ready, color it. Cut out the details after the main coloring, so as not to wrinkle or bend the paper parts during this process. For the most complex crafts, there are articles dedicated to how to make a paper tank video and a photo of each step of execution, which the recognized gurus of tank business are happy to share with beginners.

The tank has become a popular topic for today's new art of manigami (from the English moneygami - origami from money) -. This is not only a great way to beautifully give a person the necessary amount of money, but also a sign of good taste. Although, who knows, maybe if you give a friend who is fond of tanks such a folded bill, he will not use the money for its intended purpose, but will keep your beautiful present.

How to make a paper tank diagram

And finally, let's imagine, for the full disclosure of the topic of today's article - how to make a tank out of paper collection, the same papercraft that we already mentioned above.

As you can see, the diagram clearly shows the sequence of parts, the place of their attachment to each other. The advantages of such a scheme are that all the details are already painted, they do not need to be painted and matched with colors. The scheme can be printed on a sheet of paper, but make sure that it is not too thin. For work, pick up sharp small scissors that make it easier to cut small parts, as well as medium-sized straight office scissors for parts with a smooth, long edge. Responsibly treat the cutting process, because a mistake made on any part will lead to the fact that you will have to reprint the entire diagram again.

Tank assembly schemes can be quite simple. The effectiveness of such a tank, its resemblance to a complex, large model, is achieved through the use of carefully drawn details. Caterpillars, wheels, details of the turret and hull of the tank are recreated very accurately. With the help of papercraft schemes, you can play not only tank battles of the Second World War, but also make the newest and most modern models of tanks that are in service in various armies of the world. The child's passion for collecting paper models does not always develop into a passion for weapons or wars, but it will definitely make him neat, diligent, learn to understand mechanics and interest in basic physical processes. This, by the way, will be useful for girls too.

Key news tags:

Other news

Hello to all glue lovers! Today we offer make a paper model the legendary tank of the Soviet army during the Second World War - T-34. Do T-34 paper tank will not be more difficult than the models of tanks previously published: "", "".

The T-34 tank, thanks to the high combat and technical characteristics demonstrated during the tests, was adopted by the Red Army at the end of 1939. In the spring of 1940, as one of the tests, two prototypes of the T-34 tank were run from Kharkov to Moscow and back. During the trip, the tank confirmed its high technical qualities. After this test, it was decided to produce the T-34 at the main large enterprises of the USSR.

We glue the T-34 tank from paper

To create a paper model of a tank, you will need to print the tank parts diagrams, cut them out and glue them.

Any printer is suitable for printing circuits, because. black and white details of the tank can be painted with paints.
Use thin cardboard or photo paper to print large parts of the tank.
For small details, you can use regular office paper.
To create even curves, place a ruler over the fold line and run along it with the back of scissors or a non-writing pen.
Use scissors and a utility knife to cut out the tank detail.
It is desirable to cut and glue the parts sequentially, moving from one glued part to gluing the next.
If the part has an inner circle, then it should be cut first, and then the part itself.
For gluing tank parts, use Moment transparent acrylic glue or any other equivalent.
Before gluing, paint over the ends of the part, this will improve the appearance of the model.
When gluing the tank, follow the instructions