Stencil of a five-pointed star a4 format. How to make a star with your own hands: a master class. Paper star is easy

Holidays, themed evenings, theatrical performances - all this requires certain paraphernalia. And just decorating the house with interesting items, especially if they are made by hand, is always nice. In our article we will tell you how to make a star out of paper. Everyone will be able to choose for themselves the method they like from the many proposed.

Content:

How to make a small paper star

The presented stars look very beautiful when there are a lot of them, and they are multi-colored, since their size is small (about 2 cm).

Before starting work, prepare:

colored paper (can be replaced with glossy or unnecessary magazines);
scissors.

Progress:

Star for cutting: templates, stencils and patterns for printing

Templates

stencils

Scheme

Volumetric paper star

The presented star looks beautiful in a children's room for decorating the interior; on New Year's holidays, you can hang it on a Christmas tree, a wall, attach it to a chandelier, or simply decorate a gift.

The following items should be in the workplace:

high-density colored paper (can be replaced with colored cardboard);
pencil;
glue;
scissors;
ribbon.

To get a beautiful three-dimensional star, follow the algorithm below.

volumetric star

Take 2 square paper sheets and fold them in half, first on one side, then on the other, so that when you straighten the sheet, you get 2 fold lines - horizontal and vertical. Then fold twice diagonally.

With scissors, cut the paper a little (about half way) from the top and bottom along the folds, and then from the left and right.

Following the drawings, fold the edges from the cut lines.

To fix the craft, take the glue and process it on the back of all the star rays.

Then make the second asterisk according to the previous description.

Glue the two stars together as shown in the picture. You can decorate them with sequins, beads, rain, etc.

Star: origami

Stars made in the style of origami look original and stylish when made from notebooks for music or newspaper sheets.

Let's get to work:

Five-pointed paper star

If you want to make a voluminous five-pointed star, then we advise you to choose such material for work as cardboard.

In addition to cardboard, scissors, paints, a simple pencil and glue should be in the workplace.

Progress:

Star of Bethlehem

Method 1

Such a star will become a decoration in any room and not only on Christmas days. But we’ll warn you right away that it will take a lot of time, the work requires dedication, scrupulousness and patience. But the result will surely please you.

Before you begin, you should have the following materials on hand:

plain office paper (coloured) A4 in the amount of 50 pcs.;
dense threads;
PVA glue;
stationery scissors;
stapler.

Let's start doing crafts.

Star of Bethlehem
Take the sheets and cut into 2 pieces lengthwise.
Twist all paper pieces so that one edge is denser, the other is looser, coat with glue and squeeze a little more. These will be the rays of our future star.
Take a stapler and start with 3 beams. Fix them in the form of a fan.
You should put such fans on the prepared dense thread and tighten it tightly.
You will get a ray-shaped ball on a string. This is our star, which can now be hung in any place convenient for you.

Advice! If in your work you use not colored paper, but plain white paper, then spray paint will help to give the star beauty and shine.

Method 2

Making a star that glows in the dark

There is nothing complicated in creating a luminous star, as it seems at first glance. Just take any template of the star you like, make beautiful holes of any shape (round, diamond-shaped, triangular, pentagonal, etc.). After that, carefully pull any garland with small bulbs through these holes. When the job is done, the template must be fixed with glue. This version of the star is a great way to update an old unsightly garland and give the interior magic.

Advice! The stars can be hung separately on ribbons, or you can simply connect them all with a garland and lay them out on a windowsill or other surface.

Video instructions

Finding a suitable and understandable video is a real gift for needleworkers. We have selected for you the most interesting, in our opinion, video instructions for creating stars in different variations.

Volumetric paper star:

Origami five pointed star:

Origami Star Flower:

Star 3D:

For interior decoration or themed holidays, such a decorative element as a star is often used. There are a lot of variations on the theme of making a star: large and small, voluminous and flat, double or single. Materials for making crafts also vary significantly. It can be paper, cloth, foil, wire and other improvised means. In this article, we will consider the most popular formats for making paper stars. Well, a selection of thematic photos, detailed diagrams and video material of a master class on making a star with your own hands will make the task easier.

How to make a small paper star

Such stars are small (1.5 cm), but in large numbers they look very impressive and original.

To work, you will need colored or glossy paper (you can also use old glossy magazines) and scissors.

First, blanks are made: paper strips are cut, 29x1.1 cm in size. The width and length of the strips can be changed according to the desired size of the future star.
Make a small loop from the strip (at the edge), then bend the protruding short end. It turns out a pentagonal figure, press it slightly.
Turn the product over (pentagon) and continue working with the long end of the strip.
With a strip, we begin to tightly, gradually wrap the pentagonal figure, without pinching it too much. At least 10 such wraps are obtained, that is, each face of the star is wrapped twice.

Hide the remaining edge of the strip under the bottom.
The next stage: the transformation of the pentagon into a full-fledged star. Holding the workpiece with one hand, with the nail of the other hand, press on the middle of the face of the pentagon, forming the rays of an asterisk. Five pressures - and the star is ready!

Such stars look very stylish in the interior: they can fill a glass vase or a jar. And if you do this business with the children, the motor skills of the fingers are perfectly trained.

How to make a paper star

To make such three-dimensional stars, you will need thick decorative paper, scissors and glue.

Draw blanks for the rays of the star, print and transfer to the desired paper.
Bend along the lines and glue along the edge (gluing allowances are given).
Then, glue the five prepared templates together, getting a three-dimensional star.

The size of the stars can be adjusted independently by increasing or decreasing the size of the template.

How to make an origami paper star

Such stars look great and stylish from newsprint or music paper.

Fold a square-shaped sheet in half, then bend the triangle of one of the vertices.
Do the same maneuver with the other vertex of the rectangle.
Attach the opposite corner of the rectangle to the intersection point of the previous folds.

Next, bend the rays of the future star along the drawn lines. The remaining shapeless tail of the workpiece is cut off.
With the correct execution of all the folds, on the spread you can see the pentagon pattern.

The final stage is the most difficult. To get a star, you need to carefully bend and wrap the resulting template along the lines.

So, in this article, the most popular ways of making a paper star were considered. Completely different in appearance and manufacturing method, the presented options will ideally fit into the festive interior and become a spectacular decoration.

Do you want to decorate your home, classroom, desktop, Christmas card or need a little surprise? Try to make a paper star. A beautiful star will decorate any celebration! In this article I will show and tell you how to make a star out of paper. Choose which star you want to make. I will offer many ways to make simple and voluminous stars.

What do you need to make a star?

If you decide to make a paper star, then you will first need paper. It could be:

cardboard,
plain white paper,
foil paper,
colored origami paper,
newsprint,
scrap paper, etc.

You will also need: glue, scissors, jewelry (sequins, beads) and a little patience.

How to make a big voluminous star

A large three-dimensional star is good for decorating rooms or a Christmas tree. For such a star, you will need thin cardboard or thick paper.

Download the templates from the link - print and cut out the necessary blanks from cardboard. You will need to make 2 sheets with template #1 and one sheet with template #2.
Cut out templates, bend them along the dotted line.
Assemble all 5 pieces with glue. You will get a five-pointed paper star.

Such a star looks good from music paper, foil paper or thin shiny cardboard.

You can decorate the finished star with glitters, sparkles or special paint.

How to make a paper star

A simple but spectacular star can be made from plain paper. The star turns out to be voluminous and beautiful. You can make several of these stars and hang them on a thread. These stars look good both on the Christmas tree and just in the room.

Star template -

Cut out 2 stars from paper, bend them along the given lines and glue them with an offset, as shown in my video. You will make a wonderful star if you use beautiful colored or shiny paper.

How to cut a star out of paper

Sometimes we need a pentagonal star. It can be pasted on a postcard or a poster. To cut out such a star, you just need to know the paper folding technique.

Watch my video tutorial on folding such a simple star and you will learn right away!

How to make lucky stars from a strip of paper

Did you know that stars can be folded from a simple strip of paper? These funny little plump stars are commonly referred to as "stars of happiness." They are very easy to assemble. And needlework stores even sell ready-made cut strips of different colors and patterns for these stars.

Folding stars of happiness is very easy. Take a strip of paper, tie a knot at the end and begin to fold the strip. Then hide the remaining tail and slightly push the figure.

You can watch my video tutorial on how to fold these cute little stars.

Small stars of happiness can be strung on threads and you get a whole curtain - such a rain of stars. You can make a bracelet or earrings out of stars. And also just pour the finished figures into a beautiful bottle, vase or just a gift bag.

How to make an origami paper star

A very beautiful three-dimensional paper star will turn out if you make it using the origami technique. This beautiful star looks great both on the Christmas tree and on a gift.

Of course, for beginners in origami, it will be a little more difficult to fold it, but if you have patience and a great desire, then I believe that you will definitely succeed in this star.

See my master class on making a beautiful paper star:

How to make a star out of old books or newspapers

An interesting star can be made from sheets of an old book or newspaper. Each individual lstick is twisted into a thin bag, which then needs to be fixed on a cardboard blank in the form of a star.

Please note that the pages of the book will require a lot))

To decorate such an original star, you need to cover the tips of each element with sparkles. To do this, dip the bag in PVA glue and then lower it into a box of sparkles. Stick all the bags on a cardboard blank - in the end, you will get a big newspaper star.

But, in my opinion, it is still a decoration in retro style. But you might like it.

Stars glowing in the dark

Adorable paper stars that glow in the dark can be easily made by hand. To do this, you need to cut holes in the template. It can be small stars, rhombuses, or some intricate pattern. Next, in each star you need to place a garland light bulb. Every house has an old working, but not very pretty garland. Why not build luminous stars out of it?

We place the light bulb in the star and glue the template. It remains only to hang this beauty and wait for darkness.

These glowing stars look just awesome!

How to make a paper star of Bethlehem

Often, for matinees and holidays, you need to build a Bethlehem star. This is an 8-ray star and it is quite easy to make it out of paper.

You just need to download and print the template and make several blanks from paper, each time slightly reducing the size. Then you have to stick the stars on top of each other and decorate them.

You can decorate the star of Bethlehem with sparkles, rhinestones, beads and other materials. To the top you need to attach a lace or ribbon.

How to make an openwork star kusudama

In addition to ordinary paper stars, there are openwork slotted stars of kusudama. This is a star-ball, made in the technique of vytanki. A paper template for such a star is first cut with a clerical knife or small scissors, and then all the details are glued into a ball. This piece looks just amazing!

You can even come up with your own openwork pattern for kusudama.

I hope you will definitely like paper stars and make the most beautiful star out of paper!

A paper star will not only become a home decoration on the eve of the Christmas holidays, it is suitable for educational activities with children. A do-it-yourself voluminous paper star is made quite simply, while joint lessons will help develop the child's imagination and his motor skills.

An ordinary sheet of paper can be a suitable space for creativity. Having given it the desired shape, the craft can be decorated by painting with felt-tip pens, paints. Fantasy and sleight of hand will help the kid create a masterpiece. And how to make a three-dimensional star out of paper, this article will tell.

Necessary materials and tools

All the tools and materials that may be useful in the work can be found in everyone's home. Therefore, absolutely anyone can do this work. To create a star you will need:

paper;
protractor;
compass;
scissors;
simple pencil;
decorations.

Instructions for creating a three-dimensional star

They start making crafts by choosing paper. For work, you can use both a regular sheet and bright multi-colored paper. A do-it-yourself voluminous paper star can be made of durable paper; in this case, the craft will come out quite dense, and it can be used as a decorative decoration for a room or a Christmas tree toy.

On the back of colored paper, you need to draw a circle, the diameter of which will correspond to the size of the star. For these purposes, a compass is suitable, but if it is not there, then you can use a saucer or other round object. After that, you need to draw a line from the edge to the center of the circle.

At the second stage, a conveyor ruler will come in handy. With its help, from a straight line, you need to mark an angle equal to 72 degrees, and draw a line. Thus, it is necessary to mark the entire circle - you get five lines.

The next step is to connect all the lines into a star. In the center of the part, you need to draw additional lines as illustrated in the picture. After that, the asterisk must be cut out and bent along the main lines so that the drawing looks inward. If thick paper was used in the work, then the folds should be worked on much more carefully so that they are as pronounced as possible. For these purposes, you can use any blunt object (ruler, back of a knife, etc.).

Do-it-yourself voluminous paper star is done quickly enough. In conclusion, you need to make a small loop so that a beautiful craft can be hung on a Christmas tree or somewhere else.

double volume

This option is a continuation of the first instruction, which tells how to make one convex part. This master class will tell you how to make a double volume.

According to the previous example, two similar elements should be performed. A template for a three-dimensional star made of paper is presented below. Its difference lies in the fact that there are additional elements designed for gluing parts.

The elements cut according to the template must be shaped and glued according to symmetrical additions. It remains to wait until the glue dries, and the volumetric paper will be ready.

Star from book pages

And although this star looks very beautiful, many may not be happy with the fact that they have to ruin books. This is not necessary at all, because they can be replaced with old magazines, newspapers or technical publications.

When thinking about how to make a three-dimensional paper star, you should first of all take care of the materials and tools necessary for work. You will need a voluminous paper star, it can be made by following the master classes presented above. In addition, you need to prepare scissors, glue, as well as an old book.

The first step is to make a lot of paper bags. For each of them you need a paper rectangle equal to one fourth of a book page. When a lot of details are ready, they must be glued to a paper star as shown in the photo. In conclusion, a little glue should be applied to the bags and sprinkled with glitter crafts.

Do-it-yourself voluminous paper star is made quickly and easily. To make it a wonderful decoration for a room, a Christmas tree or a gift, you can experiment with colors and sizes. Such elements can be fastened together using threads, glue or double-sided tape.

What a beautiful starry sky! Millions of small lights burn in the vast sky, forming the most unusual constellations. What are stars? These are not just points in the sky, in fact, they are special planets, heated to such a temperature that they are able to radiate a large amount of light and energy. Following the instructions on how to make a star out of paper, it is not difficult to create such beauty with your own hands. We can say that stars are flares, but what kind? The time during which they emit light is different for each. Surely, everyone is familiar with sparklers - you light them, and small sparks are sprayed on all sides - also stars. They glow for a short time - a second - and there is no longer a flash.

It is worth comparing the Sun - the closest large star to the Earth. How much light and heat it gives to the living planet! Millions of years will pass until it goes out, but now every creature lives thanks to the energy of the Sun. What a pleasure it is to watch the bright sun reflecting from the mirror-like snow sheet in winter, to bask in the spring under a warm May ray or sunbathe on a sandy beach on a hot day! In autumn, the orange sun seems to merge with the golden leaf fall. On a bright day and the mood is excellent, which cannot be said about cloudy weather. They say it's dark at night without the sun. But what about the Moon? No, this is not a star, but the light that it gives off is the rays reflected from the Sun, which has gone beyond the horizon.

constellations

Not only the Moon pierces the darkness of the night with light, there are other stars - those very visible points that burn brightly high above. Thanks to ancient astrology, modern astronomy and other "cosmic" sciences, 88 constellations are currently known, 47 of which were discovered many centuries ago. Constellations are groups of stars located in celestial space so that from them the human imagination could recreate the images of certain figures. In each group, the brightest, less bright and dimmer stars are distinguished. In ancient times, they were given great mystical (cult) significance, they belonged to different religions, superstitions, deities. Some of these ideas have survived to this day, however, the impact on a person’s fate is described by more realistic methods of biological and psychological influence, a vivid example of this is modern astrology. Why do you need knowledge of the constellations? Having made such a decision on how to make a star out of paper with your own hands, you can dream up by folding the completed elements into familiar shapes or, for example, create your own composition of the night sky.

paper star light

Stars in terms of beauty attract people with their bright light. Raise your head - and thousands of rays simultaneously capture visual perception - so that your head is spinning in pleasant delight. When inventing how to make a star out of paper, a person was guided by the desire to create an image, a likeness of heavenly bodies, from ordinary material available to everyone. Light - rays streaming from the main source, the representation of these rays - sharp tips extending from the center of the paper model. A regular star is a group of beams of equal size (including volume). However, for the sake of diversity, there are models with a different number of branches that differ from each other, following the prompts of your imagination, it will not be difficult to make a beautiful interesting star.

Application of crafts

Well, how such beauty cannot but affect the most solemn holiday of the year. The New Year tree - the main beauty of the evening - was honored to wear a bright star on top, like a crown. This emphasizes the special significance of a coniferous tree among other New Year's attributes; fluffy spruce paws are also often hung with asterisks. So the forest princess becomes simply irresistible in her appearance. Following the example of how to make a paper star for a Christmas tree, everyone can make similar decorations and dress up a green beauty.

In addition to the Christmas tree, the star is used as decoration in other cases. Beautiful crafts serve as an addition to the interior, festive clothes (for example, to a children's party), magnificent small paper sparks are used for various celebrations.

The red five-pointed star is the hallmark of the Red Army. On the eve of February 23 (or another military holiday), the boys are invited to do their own crafts using a glued three-dimensional star. This will emphasize the firm attitude of the growing strong half to the male military duty to defend their family and homeland. The craft will be a great gift for dad, uncle or grandpa on a suitable holiday.

volumetric star

Instructions on how to make a three-dimensional paper star will help you quickly and easily complete this craft.

To work, you need to prepare paper (of any chosen color), a compass, a protractor, scissors, a pencil, a ruler.

1. On a sheet of paper, using a compass, a circle of the selected radius is drawn (the length of each of the rays of the star depends on the length of the compass solution).

2. A radius is drawn anywhere - a segment connects the center (the point of the compass needle) and any point on the circle.

3. The star, in this case, is five-pointed. 360 degrees of a circle are divided by five, as a result, there are 72 degrees per ray. If a different number of rays is required, the circle is divided accordingly (4 rays - 90 degrees, 6 rays - 60 degrees, 7 rays - about 52 degrees, etc.). A radius is drawn every 72 degrees.

4. The length of the sides of the rays is determined by the following action. Points are marked on each radius at the same distance from the center. The greater the distance, the shorter the rays.

5. A perpendicular is drawn through each indicated point - from one edge of the circle to the other.

6. Segments are drawn from the center to each point of intersection of the perpendiculars.

7. The figure is cut out along the outer lines of the depicted star.

8. Volume is created by subsequent bending along short segments inward and outward along the central lines of the rays.

Volumetric star is done!

double volume

The previous instruction on how to make a three-dimensional paper star contains information for making a convex part on one side of the bounding plane. This example will show you how to do double volume.

1. Following the example of the previous instruction, two identical elements are performed - five-pointed stars. However, here, in addition to the main outer surface, elements will be needed to connect the two parts into one figure. These are special "ears" that complement the shape from the sides of the rays. The figure can be cut according to the printed pattern.

2. Embedded elements are similarly given a three-dimensional shape.

3. The design is glued along symmetrically cut additions.

4. Glue dries.

Double star in volumetric form is ready!

Star

The following instruction offers to execute a simple small asterisk.

1. A thin strip (1-3 cm) is cut from a sheet of paper of any color (preferably dyed on both sides) along the entire length of the sheet.

2. The strip is neatly tied into a loose knot in the middle and slowly tightened (just as carefully so that the paper does not tear).

3. The paper on all the loops of the knot must be pressed along one plane (putting it on the table, iron it on top).

4. Turning the pentagon in the middle (knot) to any side, you need to find the part of the strip that goes on top. The protruding end, located at its edge, must be placed on it and tucked shortly, tearing off the excess part.

5. The second end wraps evenly around the remaining pentagon, wrapping around each face it encounters. It is not scary if the end is long and it will take a long time to wrap. This is a positive moment in the further creation of volume.

6. Having reached the end, the end of the strip must be tucked under the nearest overlay (if necessary, tear off the excess).

7. The angle of each vertex of the flat pentagon is compressed with fingers perpendicular to the surface.

It turns out a little interesting star!

Origami

The following method will also tell you about creating a three-dimensional shape, how to make an origami star out of paper.

1. A square sheet is cut out of paper. The square is folded in half. The corner of the rectangle rises from the fold to the upper length and unbends, similarly - another corner of the same width.

2. The bottom corner of the opposite width comes to the center of the intersection of the last folds. Further, the same corner is pressed with its side against a new fold.

3. The lower right corner of the rectangle goes to the last oblique fold.

4. The imaginary large half bends back to the smaller one.

5. The upper part of the resulting figure is cut off so that the cutting line is approximately equal to the new smaller side. It turns out an isosceles triangle.

6. The whole figure is revealed. A massive star is forming.

Origami: method number 2

This origami-style instruction will tell you how to make an eight-pointed star.

To work, you need several square sheets of paper and sleight of hand.

1. One of the squares is bent in half diagonally and turned back.

2. The upper sides are applied to the resulting fold line.

3. The lower sides also rise towards the middle.

4. The upper corner obliquely bends down and turns back, similarly at the same angle - to the other side.

5. The figure is turned upside down and upside down at the same time. The upper corner folds convexly, and the lower one follows it up along the upper oblique folds.

6. Similarly to the received part, 7 more blanks are made.

7. The blanks are connected: the small corner of each next one is inserted inside the large corner of the previous part.

It turns out a great eight-pointed figure! You can also try such work as making a star out of rubber bands, this type of craft is more complex, but no less interesting.

For many years, the five-pointed army star has been a symbol of two wonderful holidays, such as February 23 - Defender of the Fatherland Day, and May 9 - Victory Day. This symbol is used in the symbols of the army, with its help they designate the rank of a military man. The five-pointed star is essentially a symbol of the era and the great state. Therefore, I suggest you learn how to make this beautiful symbol - a three-dimensional paper star.

To make a star, we need:

The template with which the whole process will go;
Colored paper or cardboard;
Glue;
Scissors;

Cut out two pieces according to this pattern. You can print it out or draw your own. The color of the parts may differ, this must be done from thick colored paper or cardboard.

The red lines show the gluing sites. The dashed line indicates the folds. To bend the parts in these places, you need to resort to a process called creasing, but simply punching. We take for this not a writing rod from a ballpoint pen, but it is even better to do this with the edge of an ordinary teaspoon. We apply the ruler to the dashed line and push the fold line with our tool, after which we carefully bend it, as a result of the manipulations done, we should get what is shown in the photo.

we bend the gluing points and coat them with any glue, you can use glue stick, in this case, unlike the use of PVA, our paper or cardboard will not get wet and will not deform. We glue them.

In the example, the halves of the star are made from different colors.

Volume star from two sheets of paper

This option is the most simple one you can think of. In order to make a star by February 23, we will again use colored paper or colored cardboard, however, in the case of the latter, it is worth looking for double-sided colored cardboard for you.

We cut out the star according to the template, or draw it with our own hands, I will tell you how to do this at the end of the article.

The red line indicates the cut that is needed in order to connect the two crafts into the final result.

On the second part, the cut will not go from top to bottom, but from bottom to top.

We join the parts by introducing them into each other with cuts.

All this will look even better if you decorate them with satin ribbons or glitter.

How to draw a beautiful and neat five-pointed star with even rays

For this we need:

Compass;
Pencil;
Ruler;

I will write down the next steps step by step:

We draw a circle of such a diameter that the star inscribed in it corresponds to the size of your future craft.

Then we draw a line AB through the center, and a perpendicular to it.

To draw an exact perpendicular in the middle, you need to draw two semicircles from points A and B whose radius is greater than the radius of our main circle, as a result, these two semicircles drawn from two diametrically opposite points intersect, draw a line through the intersections of the circles.

Let's denote the point of intersection of the perpendicular lines as point O. We divide the segment AO in the same way as we described above, we get points E in the middle of the segment AO.

From point E we draw a circle whose radius will be equal to the radius CE, that is, we put the tip of the compass at point E, and the writing part at point C, and with this radius we draw a part of the circle that intersects with the line AB. At the place of the serif, we put the point F. EF is the radius we need, equal to the length of the side of the inscribed pentagon in the circle.

Next, we take a radius equal to EF with a compass solution and from point C we make a notch on the circle, then we put the tip of the compass at the intersection of the notch and the circle, after which we repeat this procedure 5 times, as a result of which you should return back to point C. Mark in places intersection of the circle and the point serifs, erase everything except the points. Now it remains for us to connect the dots so that we get a five-pointed star, the second option is to connect the dots so that we get a pentagon.

Conclusion

Making decorations for the holidays of the Victory and Defenders of the Fatherland out of paper is not at all difficult, because even a small child can handle it. This article will help you learn how to make such crafts for children. I also advise you to watch a few videos on which people make such stars with their own hands. By the way, in addition to the patriotic motive, our crafts can serve as decorations for children's rooms, they will look amazing if you hang them under the stream, painting them with sparkles or fluorescent red, which will give your child a real starry sky, which you will make yourself with minimal manufacturing costs.

Video

When decorating a Christmas tree or a room for the New Year, it is impossible not to remember such a decorative element as a star. You can decorate the top of the Christmas tree or even the entire Christmas tree with it by hanging a lot of stars on a thread. And you can add a festive mood by decorating the room itself with paper stars.

Volumetric paper star - step by step instructions

A three-dimensional star can become a beautiful decorative element for decorating the top of the Christmas tree. And by making it from beautiful paper and adding sparkles, you will get a really original star.

Necessary materials:

paper or semi-cardboard
scissors
ruler
simple pencil
stationery glue

Main stages:

How to make stars from colored paper - step by step instructions

If you need to make more than one star, but a large number, and even in the shortest possible time, then this master class will help you. Such Christmas decorations can be made with a child, because they are easy to make. For convenience, you can print a star template from the Internet on the selected paper, and then quickly cut them out with the baby and connect the parts together. For the reliability of the design, the stars should be fixed with clerical glue.

Necessary materials:

colored paper or semi-cardboard in different shades
scissors
simple pencil

On a note! Do-it-yourself voluminous paper stars are very easy to make. To create such decorations for the Christmas tree, you cannot do without colored paper, but it is best to take decorative paper with New Year's or winter elements. But if you still decide to take paper or half-cardboard, then pick up material of different shades and be sure to double-sided.

Main stages:

A simple do-it-yourself paper star - step by step instructions

If you need a flat paper star, then you can make it using the origami technique, as in the master class we prepared. It is easily assembled from simple paper squares, which allows you to make crafts for the New Year in the shortest possible time. For better reliability, you can apply a drop of glue to each element, which will allow the star not to fall apart into separate parts and elements.

Necessary materials:

two shades of colored double-sided paper
stationery glue
ruler
scissors
simple pencil

Main stages:

OTHER

Thinking about what to do with the kids in labor classes for International Women's Day? Take advantage of our…

Nowadays it is difficult to surprise a person, but it is possible. To make a non-banal congratulation for a wife, husband, sister or mother, ...

Sometimes there are times when you need a three-dimensional paper star. Whether it's New Year or Defender of the Fatherland Day. A…

Stars have always played a special role in our lives. In ancient times, they found their way home and oriented themselves ...

Origami is an amazing Japanese art, which results in the creation of unusual crafts from plain paper.…

Children differ from adults, perhaps, in that they always sincerely believe in a dream. Think back to your childhood. You…

New Year is one of the most comfortable and interesting holidays. Some people prepare for it for a long time and creatively, using ...

We make bright boxes with our own hands, a master class. Buying or making a gift for a loved one with your own hands is still ...

We tell you how to make an origami heart with your own handsThe origami technique is magical: with its help you can do not only ...

The step-by-step instruction “How to make a three-dimensional paper star” will help you create lovely New Year crafts with your own hands and you can decorate whatever you want for the holiday.

Photos and diagrams "" will make the creative process unpretentious, exciting and fast. We offer 3 options for volumetric stars.

For a volumetric star you will need:

Sheets of colored paper. For the third version of the star - colored cardboard. And you can make white stars and paint with paints, felt-tip pens ...
Pencil and scissors
Glue for connecting figures and their parts.

The first option is how to make a three-dimensional paper star

From sheets of colored paper, cut out two squares of the same size.
We fold one of the squares in half on one side, then on the other:

Then fold the square in half diagonally twice, as in the picture:

We make 4 cuts from the edge to the middle of the folds, which we mark in advance with a pencil:

We bend the edges of the future volumetric star. We carefully look at the photo and repeat:

Glue the edges of the rays under the fold and glue:

One half of the volumetric star is ready:

Step 6
In steps 1-5, we make the second half of the star:

Step 7
We smear with glue the rays of one of the halves from the inside:

Connect the shapes carefully. An amazing voluminous star made of paper is ready:

The second option is how to make a three-dimensional star out of paper

The star consists of two parts. Cut them out like this:

It turns out such cute details for a three-dimensional star:

Carefully, along the fold lines, bend the parts, as shown in the photo:

Bend back the places for gluing parts. The first detail of the future volumetric star is ready:

Do the same for the second piece for the star. Use paper of a different color, then the star will shine even brighter :).

To glue the two halves of the star, smear all the places for gluing with stationery glue and carefully connect the parts:

The five-pointed paper star is ready!

The last and the simplest option how to make a paper star

For one craft, cut out 2 five-pointed stars of the same size from colored cardboard. Draw them yourself or use this diagram:

Make cuts on each star as shown in the diagrams.

Scheme of a notch on one star:

Scheme of the notch on the second star:

Connect the stars by inserting one into the other through the cuts made according to the schemes and you get a pretty star:

Any voluminous star made of paper can be decorated with drawings or applications, then hung by a thread. They will be great neighbors or.
Good luck!

Posted On 12/19/2017

To make a voluminous five-pointed star, you only need a square sheet of paper or cardboard, and two minutes of your time.

So, to make a three-dimensional star, take a square sheet, fold it in half. Remember: all other actions must be performed so that the sheet folded in half lies folded down.

Fold the leaf in half again - we get a fold strip.

Now we need two more stripes - for this we need to fold our workpiece in this way:

And then like this:

Then we fold it like this:

And we evenly bend the right side to the resulting line:

Next, fold our workpiece in half, bending back:

Next step: bend the corner to get another fold line - you will need to cut along it, resulting in a triangle:

Keep this side facing you:

We bend:

We straighten:

And cut and get:

In principle, the star is ready - it remains to unfold it and slightly tweak all the lines to make it work as it should:

That's all, you can paint with gouache or paints if you made it from white paper.
Of course, this is far from the only way to make a three-dimensional star, and in the future we will definitely tell you about other options so that you have plenty to choose from.

classic model
Eight-pointed decoration
star lamp
With a surprise inside

Decorating a room or any other place for a festive event with garlands, pendants, hand-made panels is very popular. Almost any decor element can be made using the simplest materials, such as cardboard or paper sheets. Even if you want to turn everything around into a starry sky, this is not a problem, because there are a lot of ways to create different shapes of stars from paper.

classic model

Do-it-yourself five-pointed paper stars are made quite simply and even without the help of glue. You just need to master some basic origami techniques:

To work, you need a square leaf. Fold it in half and place it folded side down (towards you).
Bend the upper right corner (two paper layers) inward, towards the middle of the sheet, only slightly smoothing the place of the bend. Expand the corner. Do the same for the bottom right corner. You have an intersection left on the sheet.
Now attach the lower left corner to the center of the resulting intersection. Smooth out the fold.
Turn the same corner of the sheet back to the bend. And iron the resulting fold again.
Bend the lower right corner to the resulting triangle on the left side. Iron the fold.
Turn the right side back along the line of alignment of the triangles.

A figure similar to a bag should come out: at the bottom - a narrowing, at the top - paper of different heights. The upper part must be cut along the oblique. Lay mentally a slash from the top of the triangle on the side to the opposite side so that it crosses it below the middle. Cut off the excess.

When you unfold the sheet, you will only have to straighten or push the lines of the rays of the asterisk with your hands again. Such crafts are convex only on one side, but this is their advantage when you want to create, for example, a wall panel from them or stick them on any plane.

Eight-pointed decoration

You can make paper stars with your own hands voluminous on both sides. Such figures can be hung from the ceiling or on the Christmas tree as toys.

Place a square piece of heavy paper in front of you, face up. Bend it in half: first from the bottom up, then turn the bent half back, then from the side and turn the half back in the same way.
Place the sheet face down. Bend the bottom left corner to the top right, iron the fold, straighten the sheet. Do the same for the bottom right and top left corners. And here is a four-pointed asterisk in front of you.
On the reverse side of the sheet, on lines that are bent inward (not convex!), Mark the middle of each ray starting from the center of their intersection. In total, you must put down four points-marks.
From the edges of the rays along the fold, make cuts to the points. Bend the resulting incised edges inward, towards the rib. Coat any half with glue and glue it with the other folded edge. One "star" half is ready.
Do another one in the same way. Then grease the center of the crafts with glue and align them so that the directions of the rays do not match. To the middle, you can glue a rope for which the decor will be hung.

If you forgot to attach the thread - no problem! You can attach it to the ray by making a hole in it and threading the ribbon.

star lamp

Heavenly bodies emit light. How to make a three-dimensional paper star as bright? Cut out patterns and place a light source inside!

Draw a line on the sheet in the center, its length depends on how long you want to see the star beam. On either side of it (about 30 degrees), set aside segments a little longer (the edge of the star), and then one more on each side (at 60 degrees), but already the same length as the first line. Merge the line segments into a shape. It will look a little like a heart.
At the top (from the 30 degree line - the edge - to the center and back to the edge) draw a stripe of about 5mm. Draw the same strip to the right of the side of the figure. These strips are needed so that the parts can then be glued together.
Between the edges of the beam and the fold lines, mark the middle. Here you will need to make holes, "arranging" them in rows. If you do them in each section between the ribs and bends, then you will have four rows.
Cut out the workpiece, make holes. Perform scoring (bend the lines correctly).
Lubricate the strip on the right with glue and glue the left side of the workpiece to it.
Got the first ray.
The remaining four rays are made in the same way, thread the garland into the last one before gluing.
For the glued strips that remained at the top of the rays, assemble the star decoration by placing the garland inside.

The pattern does not have to be made in the form of holes. You can cut any, as long as the holes are not too large, otherwise the garland will be noticeable.

How to make a three-dimensional star out of paper. 3 options

With a surprise inside

Another way to make paper stars with your own hands, without bothering yourself with complex drawings, is to lay several flat blanks on top of each other:

Cut out several identical stars from cardboard (the number depends on the thickness of the cardboard and the desired height of the craft). If you want to hide a souvenir inside, then cut a circle in the center of each sheet figure.
Glue the blanks one on top of the other. Leave a few more for the lid.
To make the lid close tightly, stick a few cardboard circles on it with the same diameter as the indentation at the bottom.

Now you can decorate the star box at your discretion: self-adhesive film, sequins, fabric, paints.

Speaking of decor! Asterisks can be pasted over with pieces of CDs of a suitable size. Then your crafts will not be inferior in beauty and real heavenly bodies!

To make a five-pointed star, you need a rectangular album sheet. Or a sheet of colored paper of the same proportions.

Step-by-step instruction.
1.

cut paper stars

Fold the landscape sheet in half as shown.

3. Now we bend the lower left corner up as in the picture.

5. Cut off the excess from the resulting folded figure. The sharper the cut angle, the sharper the corners will be on the star.

Many faced the problem - How to draw a regular pentagon?
But in all known methods, at least compasses or rulers are required. The same method allows you to draw a polygon - a star, having only scissors at hand.

Having cut out such a model, you can use it as a template for drawing or for making children's applications and paper crafts. Cute stars are made from small rectangles. To do this, bend the album sheet in half, then in half again, unfold it - and you will get four rectangular identical blanks for your stars.

We will be glad if you post an article on your blog or website with an active link to the Children's Games website or to this article.

How to make a paper star

Want to decorate your home, classroom, desktop, Christmas card, or need a little surprise? Try making a star out of paper.

A beautiful star will decorate any celebration! In this article I will show and tell you how to make a star out of paper. Choose which star you want to make. I will offer many ways to make simple and voluminous stars.

What do you need to make a star?

If you decide to make a paper star, then you will first need paper. It could be:

cardboard,
plain white paper,
foil paper,
colored origami paper,
newsprint,
scrap paper, etc.

You will also need: glue, scissors, jewelry (sequins, beads) and a little patience.

How to make a big voluminous star

A large three-dimensional star is good for decorating rooms or a Christmas tree. For such a star, you will need thin cardboard or thick paper.

Download the templates from the link - print and cut out the necessary blanks from cardboard. You will need to make 2 sheets with template #1 and one sheet with template #2.
Cut out templates, bend them along the dotted line.
Assemble all 5 pieces with glue. You will get a five-pointed paper star.

Such a star looks good from music paper, foil paper or thin shiny cardboard.

You can decorate the finished star with glitters, sparkles or special paint.

How to make a paper star

A simple but spectacular star can be made from plain paper. The star turns out to be voluminous and beautiful. You can make several of these stars and hang them on a thread. Such stars look good both on the Christmas tree and just in the room.

Star template -

Cut out 2 stars from paper, bend them along the given lines and glue them with an offset, as shown in my video. You will make a wonderful star if you use beautiful colored or shiny paper.

How to cut a star out of paper

Sometimes we need a pentagonal star. It can be pasted on a postcard or a poster. To cut out such a star, you just need to know the paper folding technique.

Watch my video tutorial on folding such a simple star and you will learn right away!

How to make lucky stars from a strip of paper

Did you know that stars can be folded from a simple strip of paper? These funny little plump stars are commonly called "stars of happiness." They are very easy to assemble. And needlework stores even sell ready-made cut strips of different colors and patterns for these stars.

Folding stars of happiness is very easy.

How to cut a star out of paper?

Take a strip of paper, tie a knot at the end and begin to fold the strip. Then hide the remaining tail and slightly push the figure.

You can watch my video tutorial on how to fold these cute little stars.

Small stars of happiness can be strung on threads and you get a whole curtain - such a rain of stars.

You can make a bracelet or earrings out of stars. And also just pour the finished figures into a beautiful bottle, vase or just a gift bag.

How to make an origami paper star

A very beautiful three-dimensional paper star will turn out if you make it using the origami technique. This beautiful star looks great both on the Christmas tree and on a gift.

Of course, for beginners in origami, it will be a little more difficult to fold it, but if you have patience and a great desire, then I believe that you will definitely succeed in this star.

See my master class on making a beautiful paper star:

How to make a star out of old books or newspapers

An interesting star can be made from sheets of an old book or newspaper. Each individual lstick is twisted into a thin bag, which then needs to be fixed on a cardboard blank in the form of a star.

Please note that the pages of the book will require a lot))

But, in my opinion, it is still a decoration in retro style. But you might like it.

Stars glowing in the dark

We place the light bulb in the star and glue the template. It remains only to hang this beauty and wait for darkness.

These glowing stars look just awesome!

How to make a paper star of Bethlehem

Often, for matinees and holidays, you need to build a Bethlehem star. This is an 8-ray star and it is quite easy to make it out of paper.

You just need to download and print the template and make several blanks from paper, each time slightly reducing the size. Then you have to stick the stars on top of each other and decorate them.