Flowers from ribbons 2 and a half centimeters. Do-it-yourself flowers from satin ribbons: a master class

Floral decorations made of satin ribbons are very unusual and beautiful. Handmade - they are the best gift for both children and adults.

The specifics of making flowers from satin ribbons

Do-it-yourself flowers from satin ribbons are a painstaking but exciting task.

The main tools for making jewelry are:

With proper use of available materials, the flowers come out strong, solid. They can be attached to elastic bands, hairpins, headbands, arranged in bouquets.

Petal types

Flowers from satin ribbons are collected from petals of various shapes. The main ones are sharp and round. Any kind of petal can be made by hand. The sharp shapes of the petals are suitable for making flowers such as aster, chamomile, dandelion, sunflower, bluebell and others.

Varieties of sharp petals are:

Flowers such as roses, lilacs, ranunculus, peony and others are created from round petals.

Varieties of round petals are as follows:

two-color round (double);
round for a rose;
round inverted;
round flat;
round narrow;
round heart.

Master class for beginners: a simple flower in 5 minutes

A satin ribbon can turn into a flower in just 5 minutes. From this it can be calculated that, for example, a do-it-yourself hairpin will be completed within 7-10 minutes. You must follow the instructions exactly.

Step 2. Harvesting petals. This will require:

fold a square of satin ribbon diagonally, mark conditionally sharp ends with numbers 1 and 2;
combine ends 1 and 2. In the resulting triangle, designate new acute angles with numbers 3 and 4;
fold ends 3 and 4, resulting in a sharp petal;
cut off excess material (cut a right angle parallel to the folded side and an acute angle parallel to the fold);
solder the cut edges with a candle or a lighter, fixing the petal with tweezers for convenience.

Step 3. Forming a flower. The bases of the petals must be connected with a thread like beads, tightened and decorated with a flower. Then you should glue the petals together for a more secure fixation.

Step 4. Decorating. The middle of the flower must be decorated with a bead or a button (optional). It is possible to add rhinestones or small pebbles to the center of the petals.

Satin ribbon flower 2.5 cm - step by step instructions

A 2.5 cm wide satin ribbon is perfect for creating lush flowers with your own hands. In finished form, they resemble a spray rose. The execution technique is simple.

Step 1. Preparation of the necessary materials:

pieces of tape 2.5 cm wide and 7 cm long;
needle with thread;
fire;
scissors.

Step 2. Preparation of petals . It is necessary to melt the cut edges of the tape, bend the tape on each side so that a trapezoid is obtained, and additionally melt it to secure it. Then you need to do the same with all the tapes.

Step 3. Forming a flower. It is necessary to sweep each petal blank along the bottom edge, pull off the thread and fasten it, then sew the bases of the petals so that a flower is obtained.

To add volume, you can fix 3 more petals on top or leave the flower as a single layer.

Step 4. Decorating. Beads glued in the center imitating the core of a flower will look harmonious.

for headband

Any flowers are suitable for decorating the headband, such as large and lush roses, peonies, chrysanthemums, zinnias, as well as small roses, jasmine, bluebell.

To make a headband with a jasmine branch, you will need:

a rim wrapped with a satin ribbon of the color of the first green;
a strip of rounded felt 2 × 16 cm of the same color;
yellow plastic stamens - 1 bunch;
pieces of white satin ribbon 5 × 5 - 25 pieces;
pieces of green satin ribbon 2.5 × 3 cm - 25-30 pieces;
thread, needle, scissors, glue.

Jasmine flowers are formed very simply. It is necessary to sweep a rhombus with a white thread on a white segment, then tighten the thread, insert a plastic stamen inside and sew it up. It takes 3 to 5 minutes to make 1 jasmine flower.

Important! When weaving, the thread should not be interrupted, otherwise it will not be possible to form a flower.

To make a sheet from a green piece of satin ribbon, you need to fold it in half and round it with scissors on one side. Then you should melt the edges and, while they are soft, slightly deform them in the manner of a jasmine leaf, gather the lower edges and melt.

The finished elements are glued evenly onto a strip of felt to end up with a jasmine branch. It is necessary to let it grab and stick the finished composition directly on the rim.

For hairpins

To decorate hairpins, small flowers of low weight are often chosen, otherwise the hairpin will not hold the hair well and slip. Small roses, one small chamomile, aster are considered ideal options. A very fast and beautiful flower is obtained from just 3 petals. A satin ribbon 5 cm wide is cut into pieces of 5 cm. Circles must be made from the resulting squares.

It is necessary to fold them in half and sweep in an arc, tighten, forming a petal with your fingers. Then you need to sew together 3 petals, glue a bead in the center. The resulting flower is glued to the hairpin. Note. If the flower is not large enough, you can increase the number of petals to 5-7. However, it is necessary to choose a larger core.

Ribbon roses

There are at least 5 techniques for making roses from satin ribbons.

For beginners, the following option is suitable:

kanzashi chamomile

To make chamomile you will need:

First you need to prepare the petals. To do this, the square of the atlas is folded diagonally, then the sharp corners are folded towards the center. The resulting petal is folded in half. Cut off the tip and scorch with fire. Then fix with tweezers on the other side and cut off the base parallel to the fold. Scorched with fire so that the ends are soldered together. 15 such petals are harvested.

Gently glue the petals at the base, forming a camomile. Glue a yellow button or circle of yellow felt into the center. Kanzashi chamomile can decorate a hairpin, a children's handbag or a headband.

Lush satin ribbon flower

A lush flower is obtained, formed from round petals, scorched around the entire perimeter. They are carefully glued in layers to the base. Petals should be at least 10-12 pieces. They can be either the same color or different.

The set of tools is similar:

satin squares with a side of at least 5 cm;
scissors;
fire;
stamens - 3-5 pieces;
glue gun.

Aster

For the manufacture of asters, you will need the following accessories:

pieces of satin ribbon 2.5 × 5 cm;
tweezers;
scissors,
fire;
glue gun;
several circles of felt.

For a flower of medium size, 30-40 petals are needed. It all depends on the desired number of layers and the diameter of the aster. The petal is made in two stages.

Stage 1. A strip of satin is folded in half lengthwise and clamped with tweezers. The edge is cut at an acute angle and soldered with fire.
Stage 2. From the opposite edge, the strip is folded like an envelope, clamped with tweezers and fixed with fire.

Petals are glued onto a circle of felt along the very edge. The next layer is glued closer to the center. The petals are placed visually between the petals of the first layer. The same is done with all layers. The number of petals in each subsequent level decreases. The finished flower is decorated with a bead core. You can also combine the colors of the petals.

Bell

When making a bell, the following materials are needed:

Bell petals are ordinary sharp petals turned inside out with a seam. One stamen is glued to each petal at the base. Then you need to glue their sides to each other, forming the flower itself.

The leaves of the bell are made similarly to the petals, only the ribbon must be taken of a smaller width. They should be fixed with a glue gun under the flower so that they peek out slightly.

Hibiscus

To make hibiscus you will need:

From the squares it is necessary to cut tear-shaped petals. Before assembling the flower, they need to be corrugated. To do this, the petal is folded with an accordion in 4 rows, then twisted with a tourniquet and carried over the fire for several seconds. The cooled petal is unfolded.

A wire is glued to half of the petal from the wrong side. Such petals should be from 7 pieces. It all depends on the desired amount of hibiscus. Several stamens twist with each other, and a bud of petals is formed around them. Then the petals are slightly leveled and arched.

Narcissus

To make one daffodil you need:

scissors;
fire;
tweezers;
glue;
5 squares of white satin ribbon 5 × 5 cm;
3 yellow squares 4x4 cm.

The petal is done like this:

A square of white satin is folded diagonally twice. Sharp corners must be folded with an accordion in 1 row on each side, then clamped with tweezers, cut off the excess and soldered with fire. You should get a petal with two folds inside.
The upper edge of the petal is clamped in the middle with tweezers and melted with fire. It has a slightly pointed shape.

The stamen is made in a similar way, only the upper edge is not sharpened.

Flower assembly is a sequential gluing of all elements. The resulting daffodil is almost indistinguishable from the real one.

poinsettia

Even beginners can make a poinsettia flower from satin ribbons with their own hands.

The required materials are:

pieces of tape 5 cm wide and of different lengths;
scissors;
fire;
glue;
large stamens;
wire.

Petals need to be cut. To do this, the pieces of tape are folded diagonally and cut out so that a petal is obtained. From above, along the edges, 2 cuts are made on each side. The blanks are melted on fire and the edges are slightly deformed. In total, you need 3 petals 5 cm long, 5 petals 6 cm long and 5 petals 7 cm long. Leaves are made in the same way - from segments of 5 × 7 cm.

Flower assembly begins with successive gluing together of petals of the same length. The first layer of small petals is glued to the stamen, then the next layer of larger petals, and the largest ones are glued last. Petals must be staggered.

On the leaves you need to glue the wire on the back. They are attached to the flower by wrapping the stamen with wire.

kanzashi dandelion

To make a dandelion you need:

The execution technique is as follows:

The tape must be cut into strips 7 cm long. Fold each in half and solder the ends. These will be dandelion petals. Greens need at least 25 pieces, yellow at least 27 pieces.
Green petals are glued around the perimeter on a circle of felt with a glue gun around the perimeter. The second layer in a checkerboard pattern is also glued from green petals.
All subsequent layers are glued to their yellow petals. Thus, a voluminous chamomile is obtained, which is perfect for decorating headbands and hairpins.

Sunflower

Any kind of sharp petal is suitable for making a sunflower, for example, like an aster. A two-layer flower will need at least 26 petals. On a circle of felt with a diameter of 5 cm, petals are glued along the very edge. A little closer to the center, you need to glue the second layer in a checkerboard pattern.

The middle can be made from a circle of even felt or leatherette with a diameter of 4–4.5 cm. Beads or large black beads are glued to it. The middle is glued to the flower, and the sunflower can be considered ready. Optionally, you can add decor in the form of a butterfly or a bug.

Lilac

To make a lilac branch, you need:

The tape must be cut into strips 1.5 cm long. You will need at least 60 pieces. Flowers are made from them in the same way as jasmine flowers. Just before tightening the thread, it is necessary to stick a wire with a bead strung on it into the center of a piece of ribbon. The result is a lilac flower on a stem.

When all the flowers are ready, it is necessary to form mini-branches of 3 pcs. and fix with one of the wire legs. A lilac branch is formed from these branches and wrapped with floral tape.

Ranunculus

For the manufacture of ranunculus, you will need a standard set:

To make petals, you need pieces of satin:

2×2 cm - 18 pieces;
2.5 × 2.5 cm - 18 pcs.;
3×3 cm - 14 pieces;
3.5 × 3.5 cm - 24 pcs.

From them it is necessary to cut out round petals, like a peony, cut the base, melt it over the fire, fold the base with an accordion, clamp it with tweezers and fix it with fire. The core of the ranunculus is made from a piece of satin 5 × 5 cm, into which a cotton ball is sewn. It turns out a ball on which the petals will be attached.

The assembly of the flower must begin with the smallest petals, pasting over the stamen ball with them. Thus, a very beautiful flower is obtained, which is suitable as a decor for any decoration.

Ribbon bridal bouquet

Over the past few years, wedding bouquets made from satin ribbons have been very popular. It's unusual and beautiful. Such a bouquet will please the eye for a long time, because it will not wither.

Do-it-yourself flowers from satin ribbons for a wedding bouquet will become a kind of symbol of family happiness.

Combining various flowers from satin ribbons with your own hands, you can create decorations for hairpins or headbands, as well as themed bouquets.

To complete it, you need to make a suitable number of flowers from ribbons (roses are more often chosen) and stick them on a foam ball with a handle. For greater strength and beauty, you can stick a needle with a stone at the end into the middle of each flower. The handle must be wrapped with a strong satin ribbon. As an additional decor, you can use rhinestones, pearl beads.

Flowers made from satin ribbons are a spectacular way to decorate accessories, household items, children's things, and even make a wedding bouquet.

Video how to make flowers from satin ribbons with your own hands

How to make roses from satin ribbons with your own hands, see the video clip:

We make flowers with our own hands from satin ribbons:

Flowers from satin ribbons look very beautiful. Every person who sees such an ornament will want to repeat it with his own hand. This activity is exciting and addictive. At first, something may not work out, but after a while you can learn everything. This will help step-by-step instructions for folding flowers from ribbons with your own hands.

Making satin flowers

Making flowers from satin ribbons is no more difficult than learning how to knit. The main thing is to carefully study the schemes for creating crafts. Then everything will work out. To work, you will need the following materials:

1. Ribbons of different width and color.
2. Threads of various shades.
3. Scissors.
4. Needles.
5. Sequins.
6. Fishing line.
7. Glue gun.
8. Tweezers.
9. Ruler.
10. Beads.
11. Candle.
12. Table lamp.
13. Chalk or soap.

There are two ways to make flowers from ribbon - this is a reflow or a kanzashi technique.

The second manufacturing method came to Russia from Japan. In this way, the locals hairpin. In this case, several types of petals were used: sharp, round and long. Hairpins, clothes, hairpins or a headband are decorated with crafts.

Kanzashi Ribbon Color Scheme

1. To begin with, a workplace is being prepared.

2. You will need a table and a lamp with bright light.

3. A tape 6 cm wide is taken.

4. It is cut into identical squares.

5. The square is folded diagonally, after which the two corners fall to the central fold.

6. Thus, a rhombus is obtained.

7. The side corners are bent back, the cut point is clamped with tweezers.

8. It is straightened with scissors and then pollinated by fire.

9. The result is a round petal.

10. You will need several blanks.

11. The resulting parts are assembled with a thread.

12. It turns out a bud, which is glued to the base.

13. The middle is glued on top.

Flowers from satin ribbons using the kanzashi method are ready!

Flower of fused petals

Another common way to make crafts is the reflow method. Typically, the method is used for a large composition, for example, for a basket of flowers. When performing crafts with this technique, some nuances are taken into account:

1. Kanzashi petals look more neat than those made by melting.
2. This method is time-consuming, so it may not work the first time.
3. Not all ribbons are suitable.
4. Only ordinary, brocade, satin or nylon are used.

First, a blank is drawn on a sheet of paper. The template is cut out. A minimum of 12 petals are made. The template is applied to the tape, outlined in chalk, then cut out. Each petal is made smaller than the previous one. Flame pollinates the edge of each piece.

Ready-made crafts are collected in a bud. The work is done carefully so that the flower is symmetrical. The base of the craft is stabbed with a needle or pin, a sequin or bead is sewn into the middle. The flower is ready by melting. Such flowers from satin ribbons are well combined into bouquets.

Chamomile from satin ribbons

Chamomile has always been a symbol of sincerity and tenderness. This craft can decorate a bag or clothes. Chamomile is made in different ways. To do this, you need ribbons of various widths.

A 1.5 cm wide ribbon is taken. To make a flower, you will need scissors, a satin yellow ribbon, a fabric base, a 1.5 cm wide ribbon, matches and a glue gun.

1. The tape is cut into 28 rectangles.
2. The length of each is taken at 4 cm.
3. The top of the segment is cut in such a way that a semicircle is formed.
4. The resulting workpiece is melted with a flame so that the edges are bent.
5. The lower front corners are wrapped towards the center.
6. The same is done with the rest of the segments.
7. The base is being prepared, a circle with a diameter of 2.7 cm is cut out of dense fabric.
8. 14 petals are glued onto the prepared base.
9. A few more pieces of blanks are glued under them.
10. The middle of the craft is twisted from a yellow ribbon.
11. It is fixed with a glue gun on the received product.

Beautiful chamomile is ready!

Ribbon flower 5 cm wide

To make the product beautiful and symmetrical, you need to follow the scheme of how to make a chamomile from a satin ribbon. There are two ways to form a flower. First option:

1. For a DIY ribbon chamomile master class, you will need the following tools: matches, satin ribbon, tweezers, scissors, glue gun, white satin ribbon 5 cm wide.
2. The white satin ribbon is cut into 14 pieces.
3. Each craft is cut 5 cm wide.
4. A round petal is made using the kanzashi method.
5. They stick together.
6. Then the middle is made: a loop is made from a satin cord, another one is superimposed on it.
7. Loops are held with tweezers.
8. The right end of the cord is punched through 3 holes.
9. A knot forms. The edges are singed with a candle.
10. The finished center is fixed on the camomile. The flower is ready!

To make crafts according to the second method, you will need a needle, matches, scissors, threads, yellow and white satin ribbons, a glue gun and a candle.

The ribbon is cut into thin strips. The length of the workpiece is taken 7 cm. The edges are singeed with a candle or matches. Each blank is folded in such a way that a corner is obtained. The petals are turned over and the two sides are connected again. It turns out one big one. It will take only 5 blanks.

The middle of the bud is made, for this a circle of small diameter is cut out of cardboard, a yellow satin ribbon is glued to it. Now the flower is coming together. The petals are superimposed one on top of the other, sewn with a needle and thread. The middle is attached with a glue gun. The product is ready.

Craft from a tape 0.5 cm wide

To complete the work, you will need a white satin ribbon 0.5 cm wide, base fabric, glue gun, scissors, matches, yellow beads.

The white ribbon is cut into 24 pieces. The length of each workpiece is 8 cm. Each product is folded in half, a fold forms in the middle. The edges are melted with a candle. All blanks are performed in a similar way.

Then the base is made, for this a circle is cut out of dense fabric. Diameter 2.5 cm. 8 petals are glued to the base. Between them, the rest of the blanks are fixed. After that, the middle is done. The workpiece is smeared with glue, yellow beads are poured onto it. When it sticks, the remnants are shaken off. Use a toothpick to form a circle.

satin roses

Craft from satin ribbon and buttons

To complete the work, you will need a ruler, scissors, a tape of small width, buttons, matches and a glue gun. To make a simple flower, a ribbon is cut into 6 or 8 thin strips. The edges are pressed with a match. The ends of the future flower are glued to the center of the blank with a glue gun. The elements are glued together in such a way that a bud is obtained. A button is glued to the center of the joints.

simple flower

To work, you will need scissors, matches, a pink satin ribbon, a needle and thread, a pencil and a glue gun. The pink ribbon is cut into 5 identical strips. The edges of the workpiece are melted by the flame. Using a pencil, a mark is made in the center of each part. The edges of the workpiece are fastened with a needle and thread.

The strips are folded in two. A few drops of glue are applied to the inner surface of the product and the sewn-in part is glued. The petals are strung on a thread and sewn together. A button or large beads are used as decoration of the core.

Felt roses

Flowers are made not only from satin ribbons, but also from felt or felt. For such a rose, you will need a needle and thread, super glue, blue ribbon, chintz, green felt, wire.

A loaf of the future product is cut out of green felt. Six petals are made from chintz. The wire is wrapped with green tape, the edges are glued with a glue stick. The blanks are folded in two. Along the cut, they are strung on a thread. When the fabric is dry, it can be used for work.

Next, proceed to the manufacture of the button. To do this, an inflorescence is attached to the end of the wire, a stem is put on through a hole in the felt. A finished piece of petals is glued into the center. You can make several flowers, combine them into a bouquet. Tie everything with a beautiful ribbon. This set is perfect for a gift.

Pansies

Making pansies is very simple - the craft is done using the kanzashi method. For pansies you will need:

1. Purple ribbon 3, 4 and 5 cm wide.
2. Tweezers.
3. Beads.
4. Glue.
5. Hairpins.

Squares are cut out of the fabric, they are folded diagonally. The resulting triangle is folded in the middle twice. The edges of the fabric are cut off, melted with a flame. It turns out a petal. Several blanks are strung on a thread and tied together. By this method, a petal of a sharp shape is obtained. To get a round petal, the corners are bent towards the center. The same is done on the other side.

The corners fold inward. The ends are cut off, melted and fastened. The resulting pieces are strung on a thread and pulled together. What shape to make the petals, pointed or rounded, the needlewoman herself must decide. Next, a frame for pansies is made. A bud will be glued to it. A circle is cut out of cardboard, it is pasted over with a lilac fabric, a frame is placed on it. From the inside, the workpiece is attached to the hairpin.

Peonies from the atlas step by step

1. To make peonies, you will need a needle and thread, beads, matches, a pin, scissors, thick cardboard, organza or rayon.
2. From cardboard, you need to cut out two templates for future petals.
3. One workpiece should be several millimeters smaller than the other.
4. Then the template is outlined with a pencil on the fabric.
5. Thus, you need to prepare 8 crafts of different sizes.
6. The edges of each petal are processed with a flame.
7. This is done carefully so that there are no scorch marks.
8. With the help of a thread, three petals are collected.
9. First, large blanks are taken, then they move on to smaller petals.
10. Thus, a pion is formed.
11. Beads are sewn into the middle of the workpiece, and the clasp is attached from the inside.

Peony hairpin

Peony is made using the kanzashi method. To make it, you need a green ribbon 10 cm long and 5 cm wide. Multi-colored ribbons 1 meter long, thread, needle, scissors, candle, sheet of paper and pin.

First, a pattern of petals is cut out on a sheet of paper 5 cm high and 2.5 cm wide. The blank is folded in half, then cut out. The resulting template is outlined on the tape and cut out.

Petals are formed from the ribbon. You can simultaneously perform several blanks, for this the fabric is superimposed on each other in several layers. Thus, three rows are obtained. Three samples of different sizes are created. 3 rows of 6 blanks are cut out, their edges are fired. The bud is grouped. Two petals are folded together and stitched. The remaining 6 parts are stitched in a checkerboard pattern. You need to complete 2 rows.

Then the stamens are made from a yellow satin ribbon and inserted into the center. All rows are pulled together with a thread and stitched. Then the leaves are made: the edges of the ribbon 10 cm long are scorched, then folded and stitched.

To decorate the product, a circle is cut out of green felt. A finished bud and leaves are glued on it. A pin is attached to the inside. Satin ribbon flowers are easy to make. Products are beautiful and unusual.

The best videos on the topic - how to make flowers from satin ribbons with your own hands.

When people hear about flowers from ribbons, everyone imagines a different picture: someone is a parody of real flowers, someone is a simple gerbera. The truth is that very few people make imitations of fresh flowers, as they are made for quite a long time and require a lot of attention and skill. But the process of making beautiful and eye-catching flowers from ribbons is very exciting. It will help to distract from the pressing problems of any person.

kanzashi art

Kanzashi is the art of decorating women's hairpins that originated in Japan. The thinnest shreds of silk are folded in the form of petals of chrysanthemums and other flowers, they are used as decorations for women's hairstyles.

The passion for creating artificial flowers from satin ribbons has gained immense popularity in our country. The advantage of this whole lesson is that at the end of this action you will get satisfaction, because after 30 - 40 minutes you will definitely get a more or less decent flower. Yes, the first time you will get ridiculous flowers, but over time you gain experience, and the following instances will be more acceptable.

The advantage of doing this is that it does not take you a lot of time and does not require talent. All you need is to gain more experience and watch a couple of training videos on the Internet.

All flowers from ribbons are made quite durable, but if you are making a one-time decoration, then naturally the special strength of the product is useless. Agree, everyone can have a situation in which the strength of this product is necessary. For example, if a flower serves as a decoration for a child's gift, strength will not hurt here, otherwise your flower will last a maximum of two days.

Types of Kazan

There are about nine types of kanzashi. The most common - Hana kanzashi. Usually they are created by Japanese craftsmen from small squares of silk by folding. This folding technique is called tsumami in Japan. A small square of fabric is folded with tweezers or tongs and, thus, turns into a petal of a flower. Then, such petals are interconnected with a thread and a needle or attached to some kind of base to make a full-fledged flower.

Geisha kanzashi are worn depending on the month, season or holiday. Each month can have its own specific color. So, for example, in January kanzashi there are green, red, white colors. The autumn months are characterized by colors such as yellow, red, orange.

Kanzashi needlework is now becoming very popular not only in Japan and China, but throughout the world. In Russia, there are already many sites and forums describing the tsumami technique. Anyone, even a child, can master this simple technique.

In the creation of kanzashi, there are two main types of petals - sharp and round. And each of them can have countless options for execution. Some craftswomen come up with new forms of petals. For example, a small curl is made in a sharp petal or the petal is completely turned inside out.

Each master of kanzashi appears in the form of an artist, since the composition of the flower itself from the various forms of the petal is a real art. Unlike Chinese and Japanese craftsmen, many Russian craftswomen create kanzashi from ordinary satin ribbons. Sometimes any other fabric can be used, from chintz to even denim. Usually, the resulting compositions of petals are attached to hair ties, thereby obtaining a very elegant bow, suitable for any holiday. In addition, many craftsmen attach them to a blank for a brooch, making and selecting colors for a suit or dress.

Also, kanzashi began to be used to make whole bouquets of ribbons. Such bouquets are now gaining very great popularity, as they will never wither and, no doubt, will delight anyone even on the most cloudy day.

Ribbon roses

After reading this article, you will know how to make a flower from ribbons, which will be in no way inferior in beauty to store ones, will serve as a wonderful decoration, both for a gift and for a dress. If you are interested in this lesson, then do not stop there, but experiment and improve.

You should know that there are several basic manufacturing techniques on which, in principle, all these products are based. Let's say right away, do not try to make an exact copy of fresh flowers, give free rein to your imagination. Only in this way you can feel more deeply all the subtleties of this art.

Before you start making, you must prepare the following props: good scissors, thread with needles, a so-called glue gun and a few sticks of glue, and the most basic material is, of course, satin ribbons. You will also need a few tongs, beads, fishing line, and a lot of other things that an avid needlewoman will definitely have. For convenience, your workplace should be free from all unnecessary and well lit. Because the quality of your work depends on it.

melted petals

Now let's talk about a method that is ideal for people who want to do voluminous work. But that technique has its drawbacks:

First. Petals that have undergone a melting process do not look as perfect as flowers made using other methods. So it is undesirable to use flowers of this origin with other works. Since the difference in the accuracy of the works will be too obvious.
Second. You must be patient and clearly understand that not everyone will succeed in such a voluminous work the first time.
Third. Choose your material carefully. Since not every tape is suitable for this method. And to find out which material is most suitable for this method can only be through trial and error. It is advisable to use satin or nylon ribbons.

Flower in the technique of "melted petals"

Learning to craft with our own hands

If you make roses from ribbons yourself, and not buy them in stores, then you will significantly reduce your costs for these products. We will not go into step-by-step instructions for making this product, but will briefly talk about the variations of this type of ribbon jewelry.

There are several of these variations. One option is to glue the triangles together. This method is performed quite quickly and is not very difficult.

The second variation is the so-called twisted rose. The beginning of this method is somewhat reminiscent of the previous one, but after the formation of the center is completed, it is necessary to turn the ribbon, thereby twisting it layer by layer. When the work is completed, the finished product must be fixed.

Also, do not forget that the aesthetics of the finished product also depends on the quality of the material from which the tapes are made. It will look good if you combine a couple of different colors in one composition. It is advisable to choose tones of a more delicate shade.

If you want to make a bouquet of flowers, then it is not necessary to make a bunch of simple flowers and combine them into a bouquet. Although you can go this way, but if you want to make a bouquet, then there is a much easier way. Let us explain in general terms how this product is made.

So, for starters, the main part (base) is assembled. It consists of a ball of a suitable size and a pen. We fasten this design and then decorate it with ribbons and ribbon flowers.

Roses from ribbons of various techniques have become a real boom in modern design art. They began to decorate not only gift boxes, but also clothes, accessories, hats and everything that catches your eye.

Making roses without stitching

There are many different options for making fabric roses. Weaving, stitching, twisting, and many other simple movements are based on techniques. In this article we will offer you a couple of options for a simple, but very beautiful and neat rose. After studying the material, you yourself choose which method you will use.

For creative work, you will need a ribbon that is 5 cm wide and 75 cm long.
First of all, it is necessary to singe the edges of the ribbon so that they do not bloom. Take the edge and fold it to the opposite side so that you get a triangle.
Now this corner needs to be twisted and then fixed. Here, the middle of our rose is ready.
Now bend the tape to the edge on the other side. Then we fold the tape as if we want to make a paper boat. We fix these actions with a “needle forward” seam, which has been known since the school curriculum.
We continue to bend the tape and secure it with a thread, using this principle until the very end of the ribbon. As a result, you should get a spiral.
Pull the spiral a little with a thread and evenly distribute the folds, which will later become the petals of our rose.
Now we begin to form a bud, twist the ribbon, stitching it with a thread from time to time so that our beautiful rose does not fall apart and bloom.
To make the flower more like a natural one, we need a leaf. Making it is just as easy. We fold a small piece of tape, 5 cm wide, with the edges inward, then again in half lengthwise, after that we wrap it according to the principle of a paper bag.
We fix it, collect the rose with petals, glue it and you're done.

Rose sewn from satin ribbons

For this option, you will also need a tape, the width of which is 5 cm. This time we cut this tape into equal squares. Each square, later, will become an independent petal.
Make about 25 elements and singe them around the edges with a lighter so that they do not bloom. You can use tweezers for convenience, but you can do without it.
We bend the square in half, now we bend each corner to the middle.
Now let's move on to the most jewelry action in our work, cut off the bottom edge and melt it over the lighter. The same work must be done with the rest of the squares that we have prepared for the petals.
We take the blank for the petal and twist it and sew it with a thread. We apply the second petal, wrap the first one with it and sew it in the same way. We do exactly the same work with the rest of the petals, we try to make the petals shift along the axis, so that the bud looks like a real one.
The level of the petals is also important; if done correctly, the bottom of the bud should turn out flat. After the bud is ready, proceed to the leaflet.
You will need a tape measuring 8 cm long and 4 wide, bend them as if we want to twist. Now fold it in half, putting one part on top of the other. After that, you should bend all the corners into one and cut off the corner or tail, which will turn out from behind. We solder the cut lines with a lighter. The leaf is ready.
It remains the case for small - to collect the whole flower. We glue the bud to the leaves and our decoration is ready to use.

Openwork tricolor flower

We will tell you how to make a light, airy and delicate flower on an elastic band from satin ribbons.

We will need:

satin ribbons in three shades. Tape width 4 cm,
narrow rep tape 9 mm wide,
to decorate a flower, you will need artificial pearls on a string,
felt circle, elastic band and for the middle of the flower you need three milky beads (their diameter is about 8 mm),
lighter, thread with a needle, pins, foam bobbin as an auxiliary material, glue gun, candle.

Let's start our work with the darkest tape. We need 7 segments of 8 cm. Fold the segments in half, cut them off with a pin, and cut off the corners and edges. It turns out the shape of an oval. Now in the upper part of the petal we make a notch with scissors about a centimeter and a half. Now we make blanks from a pink ribbon. From this tape, you need to make 4 pieces of 8 cm. We make a cut at the fold.

We get 4 segments of 8 cm. Fold them in half again, fix with a pin, cut off the corners and edges. We do not make a notch on this petal. Now you need to make 6 pieces of 7.5 cm from the milky-colored ribbon. Cut it at the fold, add one more of the same strip, now fold the three strips in half, and cut it at the fold. In total, you will get 6 segments. Peel off with a pin and cut off the corners and edges of the tape.

Now let's make the petals. To do this, you need a candle or a lighter. Also use tweezers to protect your hands from burns. Here you need to bring the petal high to the fire, because the atlas melts very quickly, we turn the petal 180 degrees, add two - one to one, clamp the fold with tweezers and melt it with fire, we get a double petal. All petals should be airy and light. Then we melt the petals of the lower tier, it has a notch. You need to catch a stream of hot air, then the atlas will curl up as it should, the ends will bend beautifully.

We continue to work

After we have prepared the petals, we begin to work with the babina. We take a needle and thread, stick the blunt end with an eye into the foam plastic with a sharp movement, it is very easy to do this, and now we string the darkest petals with a twist on the needle. We place them so that the inversion looks down. You can do it in a checkerboard pattern. Then we place the other two colors with the folds up.

After all the petals are strung, we take out the needle from the foam, pull the thread and make a few stitches to secure the petals. This method is more reliable than gluing with glue.

Let's start making a flower. To do this, take three beads and string them on an ordinary fishing line, pull it tightly so that they fit in the form of a triangle. The center for the flower is ready. It needs to be glued to a felt mug.

Pink satin peonies

We will need: pink satin ribbon 2.8 cm wide, lilac a little narrower - 2.7 cm, we also need a ribbon 5 cm wide. You can take milky and golden ribbons, and to finish the rim, take an imitation of a pearl thread, rhinestones on a thread . Also take a metal rim pasted over with a film, a lighter, tweezers, a glue gun.

From the tape we make segments 14 cm long. Folds the tape in the form of a tongue along in half, combine the edges, then remove the finger, pinch, and melt with fire, not reaching the satin edge now.
In this way, we process a petal from a pink ribbon, then proceed to a lilac ribbon.
We fold the front side, go diagonally to the upper corner, fuse the edges so that later the ribbons do not disperse.
You should get a beautiful corner with folds, you can pinch it with tweezers if it’s more convenient for you, and cut off the corner.
To give a leaf a bend, it must be heated.
We fold the blanks in pairs, glue them in three pairs, leave the rest of the leaves not glued.
Now you need to measure a segment of the chain with rhinestones, apply glue with a toothpick. We glue the rhinestones very carefully, distributing evenly along the desired length, and apply a chain with rhinestones.
Thus, we prepare a bunch of beautiful leaves of 5 pieces, there should be 10 bunches in total. They need to be glued on the fold and clamped with tweezers for a few seconds so that the glue hardens.
We glue the prepared stamens of the name and stamens. We apply three drops of glue at the base and glue the decorative stamens.
Such a flower is a bit like a peony bud. You can make several opened flowers and two or three buds.

layered rose

We will need:

Scarlet satin ribbon 4 centimeters wide, we need it 42 cm.
We also need a finishing tape (the edges are organza, and the center is satin).
Gradient ribbon - width 4 cm, we need it 96 cm.
Felt circle with a diameter of 3 cm, and the middle for a flower.
Lighter, scissors, needle and thread.

Work process:

Let's start with a satin ribbon. Cut off a 14 cm strip, fold it in half. Then put the front side inward, now step back from the fold 3 cm and cut off the corner, but do not cut off the upper corner.
We clamp the cut with tweezers, melt it with fire.
The remaining 3 millimeters will melt, they will not be visible on the tape, but when you make a leaf in this way, this corner will never tear, the leaves will keep their shape well.
We bend the sheet, make it convex. Now just cut off the corners. The cut is treated with fire.
We sew with wide stitches along the entire length of the cut. We tighten the thread, fasten it. You will have a beautiful petal. We need three of them.

Now let's start making the flower itself. We need 8 pieces of 12 cm.
We fold the segment, combining the corners, turn it inside out, process it with fire, fold it in half, turn it back to the center. Align the ribs in height, cut off the corner. We pay the cut. The cut makes it possible to put the petal at an angle of 45 degrees. Most importantly, combine the corners and melt the material well. The corners can be lowered down, align the folds, cut off the corner, melt with fire.
You need to make 8 such petals, they will never turn out the same, this is not necessary, such a flower looks more alive, like a real one.
Glue the leaves on a felt circle.

Glue the petals directly onto the workpiece. We apply glue to the cut and attach the leaf to the workpiece so that it looks up.
We glue the petals at a distance of 1 cm to get a neat middle.
We glue the four petals first, and then place the rest of the petals between them.

Satin Ribbon Narcissus

For work, we need a ribbon of two colors.
We cut from it 6 segments 14 cm long (tape width 4 cm).
We use yellow and cream color.
Felt circles with a diameter of 3 cm, beads on a thread with a diameter of 4 mm, stationery clip, thread with a needle, glue gun.
Let's start by processing the tape sections.
Then we begin to collect the petal. We fold the segment in half with the front side inward, cut off the right corner, stepping back from the edge of 1 cm. We melt the cut with fire.

Now we turn it inside out, fold the cuts and ends so that the corners are aligned. We make an envelope and along the edge of the edge of the front side, we put the part on a needle and thread in small folds.
Then we do it with a ribbon of a different color. Don't forget to melt the cuts. Turn inside out, fold edges in.
We collect the petal on a needle and thread. It turned out a yellow petal.
Thus, alternating color, collect all the petals - yellow and cream. Pull the thread, tie the edges. We turn the product inside out, making sure that all corners are on top.
You can pull the flower together by inserting the needle into the loop. Cream petals should be on top.
This flower resembles a daffodil. The top tier is a cup of narcissus.

Daffodils with a yellow center

In this material, we presented 6 step-by-step master classes for beginners, following which you can make flowers from ribbons for making / decoration with your own hands:

Artificial flowers (interior);
wall panels;
Topiary;
Decorative and wedding bouquets;
Jewelry (rings, brooches, necklaces, bracelets);
Hair accessories (headbands, headbands, hairpins, rubber bands);
Buttonhole;
Gift wrappings;
decorative pillows;
Jewelry boxes and other small items;
Albums and notebooks;
Applications for clothes, bags and shoes;
… and much more! This selection of photos shows only a small part of the crafts that you can do by mastering various techniques for making flowers from ribbons:

In addition to step-by-step instructions, you will find 30 photo ideas for inspiration, as well as a useful selection of videos.

Master class 1. Twisted rose from a single ribbon

Let's start, perhaps, with the simplest and fairly quick way to make roses from ribbons with your own hands. Having mastered the technique of twisting a rose from a ribbon, you can do them while sitting in front of the TV. Depending on the width and length of the tape you use, you can twist both small and lush buds. You can use a ribbon from any material - organza, satin, cotton and even linen strips.

What you need:

Any ribbon - the longer and wider it is, the larger the bud will turn out. For a medium-sized rose, a ribbon 2.5 cm wide will suffice.
Thread with a needle or hot glue gun.
Scissors.

How to twist a rose from a ribbon:

Step 1. Straighten and lay the tape in front of you, then bend one of the ends of the tape (any) along the oblique, as shown in fig. 1.

Step 2. Wrap the tip of the ribbon into a roll in two or three turns to make the core of a rose, fix its lower part with glue or simply sew (see Fig. 2).

Step 3. Now we start to form the rose petals. To do this, again bend the ribbon obliquely to the outside (see Fig. 3) and wrap it around the core of the rose, holding (and, if desired, fixing with thread / glue) the entire workpiece from below (see Fig. 4).

Step 4. Next, continue to “build up” the layers of “petals” according to the scheme: bend the tape to the outside - wrap the bud - bend the tape to the outside - wrap the bud, etc. (See Fig. 5). Periodically fix the layers of tape at the base of the bud with glue or thread with a needle. Remember that the most important thing is not to let the ribbon bloom.

Experienced decorators can twist the rose, fixing the layers of tape just a couple of times (at the beginning and at the end), while it is easier for beginners to stitch / glue the “petals” of the rose much more often.
It is more convenient to twist the rose by holding the base of the bud between the index and middle fingers so that the flower seems to be lying in your palm.

Step 5. When the rose reaches the desired size, press the end of the tape to the base and tie / glue (Fig. 6).

Practice twisting ribbons of different widths and lengths, experiment with the angle of the ribbon, the number of folds per layer, or the density of the twist to achieve the effect you like best. So, for example, a rose twisted from a ribbon can be very multi-layered or, on the contrary, softer, have sharper corners or, conversely, rounded ones.

If you still have questions, we suggest watching a video on how to make a flower from a satin ribbon with your own hands using this technique.

Master class 2. Realistic flowers from ribbons (peonies, roses or ranunculus)

Now we suggest that you familiarize yourself with the technique, following which you can achieve the most realistic and elegant appearance of the petals, which is only possible for flowers made by yourself. Take a look at this collection of photos and see for yourself.

With all the beauty and apparent complexity, even a beginner can make such flowers from ribbons with his own hands.

You will need:

Candle or lighter.
Ribbon 5 cm wide (for a medium peony) made of 100% polyester (this can be either rayon / satin or organza). Keep in mind that ribbons made from natural materials will not work. If you want to make a large and lush peony, then you can use either more petals and / or a 7-8 cm wide ribbon.
Scissors.
Needle and thread to match the ribbon.

How to make a peony with your own hands:

Step 1. Cut the tape into squares in the following sizes and numbers:

5×7 cm (6-10 pieces);
4×6 cm (6-10 pieces);
3×5 cm (6-10 pieces);
2×4 cm (6-10 pieces).

As a result, you should get a minimum of 24 and a maximum of 40 squares. The more petals you make, the more magnificent and larger the bud will turn out.

Step 2. Now arrange the groups of squares into piles. Then cut petals from each stack (the shape is shown in the figure below). Keep in mind that accuracy is not important here, everything can be done by eye, without measurements and without using templates. The main thing is that you get petals of different sizes: very large - large - medium - small.

Step 3. It's time for the fun part - giving shape and volume to our petals. To do this, light a candle or lighter and, holding the edges of the petal at a distance of about 2 cm from the fire, melt them (but do not set them on fire!). Rotate the blade slowly but quickly. Thus, you need to process all your workpieces.

If you want the petal to take on a more rounded shape, hold it over the fire a little longer, but do not reduce the distance from the fire. However, sometimes the petals slightly blackened from the fire look quite organic.

Step 4. Take one of the smallest petals, roll it into a roll and make a couple of stitches in its lower part to fix it. You have obtained the core of your flower.

Step 5. Attach the second small petal and secure it with a couple of stitches as well. Continue attaching the petals one by one, following a checkerboard pattern. When you are done with the small petals, start adding the medium petals, then the larger ones, and finally the largest ones.

Flowers from ribbons of two shades

Flowers from ribbons of the same shade

Well, that's it, the peony is ready!

By the same principle, but by changing the number, shape, size and color of the petals, as well as adding stamens from beads or floss threads, you can create roses, tulips, poppies or ranunculus.

Following our master class, you can make flowers not only from satin ribbons, but also from organza. Why not use old ribbons for children's bows?

Master class 3. Simple flowers from ribbons in 5 minutes

If you need to make flowers from ribbons with your own hands as quickly as possible, for example, to wrap a gift, then this step-by-step instruction will help you out.

What you need:

Any tape;
beads;
Scissors;
Hot glue gun.

How to make a ribbon flower:

Step 1 Cut out a small circle about 5 cm in diameter from cardboard or thick paper. This circle will become the base of your flower and will be hidden under the petals, so it does not have to be cut neatly.

Step 2. Start gluing the tape on the top edge of the circle, while forming a pleat, as shown in the photo below.

Step 3. Continue sticking the tape in a spiral in 3 or more layers. When you get to the center, cut off the excess tape, tuck the end in, and glue it gently.

Step 4. Put a large drop of hot glue in the center of the flower and quickly fill it with beads.

Master class 4. A small textured flower from a braid-wave

If you want to decorate a ring, headband, brooch or necklace with a flower, then a rose made from wave braid will work best. After all, it turns out so neat, strong, elegant and small.

What you will need:

A braid-wave of medium width and a length of 50-60 cm (for one rose) or two ribbons of different colors of the same width, 25-30 cm long (if you want to make a two-color rose). However, the length can be more or less, it depends on what size you want to make the bud.
Scissors.
Sewing machine.
Threads with a needle to match the braid.

Step 1. Take two ribbons-waves of the same length and twist them together as shown in the photo. Before you start weaving, fasten the two ribbons with some sort of clamp so that they do not unravel.

Step 2. Machine stitch the edge of your piece to secure the weave.

If you don't have a car, no problem. Just walk with large stitches along the entire length of the braid.

Step 3. To make a flower, just start folding the braid from one end, in some places fix the layers with hot glue.

STEP 4 When you're done, you should end up with a bud like this. The remaining tip of the braid is simply tucked under the flower and fixed with glue.

Step 5. Glue a small circle of felt, cardboard or thick fabric to the base. In the future, you can glue anything to this base - from hairpins to rings.

Step 6. Have you noticed that all the petals of our flower are closed? In this form, it looks more like a peony or ranunculus. If you want the flower to become a rose, simply spread each petal outwards one by one.

Master class 5. Poinsettia with leaves

It's time to tell you about how to make poinsettia from ribbons, with which you can decorate anything, for example, an autumn wreath as in the photo below.

What you will need:

Ribbon 4-6 cm wide red, cream or any other desired shade;
Green ribbon (for leaves) 2-3 cm wide;
Scissors;
Needle and thread to match the ribbon for the petals or thin copper wire (jewelry);
beads;
Hot glue.

How to make a ribbon poinsettia:

Step 1. Cut three pieces of the same length from the tape. How long should the segments be? It depends on what size flower you need. If you want to make a flower with a diameter of 12 cm, then the segments should be exactly that length.

Step 2. Give the resulting rectangles a diamond shape. You can do this in the following way: stack the segments on top of each other, fold the stack in half, then give the resulting square the shape of a triangle, cutting off the excess on the sides. Voila, we got rhombuses!

Step 3. Squeeze each diamond in the middle and tie the folds with thread (you can make a couple of stitches) or jewelry wire.

Step 4 Fold all three blanks next to each other, then tie them with thread or jewelry wire to make a flower. Adjust the petals if necessary.

Step 5. Glue a few stamen beads in the center of the flower.

Step 6 Now let's take a look at the leaves. Cut two pieces of green tape 6-9 cm long (the length of the pieces should be about three times the width of your green tape). Lay one of the rectangles wrong side up on the table. Bend its right side down obliquely so that the workpiece acquires an L-shape (see photo). Now fold your letter G in half to make a blank in the form of a house with a roof. Gather the bottom of the "house" with a couple of stitches or glue.

Step 7. Now the leaves can be glued / sewn to the back of the poinsettia, to the felt round base (if any) or directly to the decor object (rim, pillow, etc.).

Master class 6. Lace ribbon flower

And finally, we present another express method for making a simple but beautiful flower with your own hands. The principle of operation in this technique is similar to that described in MK No. 3, but instead of glue, a thread with a needle is used here to fix the craft, and lace instead of a satin ribbon. However, you can use any other. Lace flowers make beautiful brooches and hair clips.

What you will need:

Lace ribbon;
Scissors;
Needle and thread to match the ribbon;
beads;
Hot glue.

How to make a lace flower:

Step 1. Baste the ribbon along the bottom edge with wide stitches.

Step 2. Once you're done sewing, gather the ribbon by pulling on the thread and bring the two ends together to complete the circle and make the first layer of petals.

Step 3. Glue a small circle of felt or other fabric in the center on the wrong side of the flower. Sew the necessary accessories to it, for example, a pin, to make a brooch.

Step 4. Glue beads, rhinestones, stones or other decor in the center.

If you want to continue your acquaintance with the art of making flowers from ribbons with your own hands, then we offer the following step-by-step video instructions for viewing. From this video, you will learn how to make kanzashi flowers from 2.5 cm ribbon.

This video shows how to make a rose from a satin ribbon, different from our master class number 1.

Here is another tutorial on how to make a shabby chic rose.