How to crochet a round neck. How to crochet a neck beautifully? Crochet neckline - diagrams and description. Finishing the edge of the product with a crochet

All needlewomen face the problem of processing open sections of products. Consider, for example, how to crochet a neck in several ways. We will also gradually analyze the proposed patterns of patterns and ornaments for finishing the edge.

Neck options

The raw edge can be finished in one of several ways. We list the main options for how to crochet a neck and decorate a product:

Narrow border (no more than 0.5-1.5 cm). A narrow edging or rib is ideal for light, openwork and children's things.
Border, turning into a collar (from 5-8 to 15-20 cm). Can be combined with any kind of products.
Wide finishing ornament (from 1.5 to 4-5 cm). Most often used in the design of the neck and the edge of the sleeves of pullovers and jumpers made of medium-weight yarn.

Sometimes beginner needlewomen do not know how to crochet a neck beautifully. In this case, you can use By the way, they are used not only to decorate wickerwork. An ordinary fabric dress can be easily turned into a festive outfit by decorating with a small accessory. Details contrasting in color look especially stylish (photo 1). Then a neck is not required at all. Schemes of such removable products are supposed to work in the direction from top to bottom. That is, at first several rows are knitted, the first of which will be the edge, and then, following the instructions, a slight uniform expansion is performed.

Processing the bottom of the product, processing the armhole or sleeves and crocheting the neckline in the same style

The most harmonious look is the same finish of open sections. Agree that cutting and stitching fabric inlays is a rather laborious process. And the use of other technologies (embroidery, macrame) can also be quite problematic. Therefore, very often for the design of products sewn from fabric or made with knitting needles, one of the most common types of needlework is used - crochet. Neck tying, especially on T-shirts, tops, dresses and other light (including openwork and children's) products with an open armhole or short sleeves, is usually carried out in the same way. The first row is usually done with single crochets. And then you can fantasize to your taste, using different techniques. Then the product will look stylistically finished, neat and beautiful. Let's start with the simplest step pattern, with which the neckline is most often crocheted. Schemes in this case will not be required, since it will be very simple to work on a textual description.

Execution of the "step step" pattern

How to crochet a neckline so that the edge is even and does not stretch? Use for this not simple columns, but a pattern unusual in its technology. The work in this case will be done in the opposite direction - from left to right, which is why the name of the mating is associated with cancer moving backwards. So, having reached the edge of the canvas and having completed the last loop of the row of single crochets, do not turn the product to the back. Insert the hook into the last element of the base, directing it from the front (rolling 90 ° clockwise), and pry the working thread, previously stretched to the left, through the hole. There are two loops on the tool, knit them. Then, moving back, follow the "crawl step" to the end of the row. The edge of the product will be in the form of scars obtained from overlapping threads. Such a neck finish can be carried out both with main threads to match the product, and with finishing threads.

Description of schemes for finishing the neck

Consider a few simple, but rather elegant ornaments that are made on top of a preliminary row of single crochets (in the diagrams - a chain of air loops).

The designation ** is rapport, that is, the repetition of the same elements until the end of the row.

Pattern one:

1 p. - *2 post. with 1 nak., 1 air. P.*;

2 p. - * arch of 4 air. n. over the column., 1 column. without nak. in the air P.*;

3 p. - *fan from alternation 5 pillar. with 1 yarn and 4 air. n. in one arch of the last row, then 1 pillar. without crochet into another arch *.

Pattern two:

1 p. - *pillar. with 1 yarn*;

2 p. - *fan of 4 pillars. with a crochet., 3 air. P.*;

3 p. - * in the post. last row 2 pillar. with 1 yarn, 3 air. p., pico from 3 air. p., 3 air. p., 2 pillar. with 1 yarn *.

Pattern three:

1 p. - *pillar. without nak., 3 pico out of 3 air. p., pole. without nak., 5 air. n. over 3 loops of the last row *;

2 p. - *pillar. without nak. in arches from air. p., 9 air. n. over the pico group *;

3 p. - *9 post. without nak. over air. p., 1 column. without nak. into a pole. previous row*.

The simplest and at the same time elegant way to finish the product with the "Fan" pattern

Any edge will look neat with this fairly simple ornament. It is not necessary to be a super-craftsman and know all the tricks on how to crochet a neck. It is enough to learn how to perform only a chain of air loops, and without it. The ornament consists of three rows, but if desired, they can be repeated several times. The result is a wider openwork border.

1 p. - along the edge of the canvas, perform arches of 5 air. loops (on the basis we skip 3 loops) and a pillar. single crochet;

2 p. - repeat the previous row, knitting a post. in air arches;

3 p. - alternate the column. without a crochet (with a similar column of the previous row) and a fan in an arch, made of 5 columns: 1 without a crochet, 3 with 1 crochet, 1 without a crochet.

Two ways to knit corners

What are the features of the edge processing with the above pattern? In the implementation of turning lines and corners. Tying can be done in two ways:

1. In the case when it is planned to perform only the main ornament without repetition, you can rely on the above photo. Then at the very corner there will be one of the scars.

2. If you want to make the openwork border wider, you should change the technology a little. To do this, when performing 1 row at the very corner, make an arch from the air. loops and single crochets (preceding it and ending it), knit in one loop of the base (on the very corner). Then, as a result, there will be no toothed fan on the corner. It will appear after repeating 1-3 rows.

Therefore, you should immediately decide how to crochet the neckline - make it in the form of a narrow embossed edge or a wide border. And only after that plan your further work. Otherwise, the neck will turn out to be tightened and with a concave corner connecting it to the product bar.

"Second life" of the neck. Repair of old things

Very often, knitwear loses its original appearance and shape during wear. In this case, the neck can be processed. In this case, the appearance will become fresh and attractive. Carry out the binding as follows:

Use sharp scissors to cut off the piping, trim, or collar;

If necessary, baste the edge with wide stitches, tucking the fabric inward by 0.5 cm;

If the fabric has a fine knit, a basting collar can be omitted;

Knit the first row with single crochets, slightly pulling the fabric down, they can also be alternated with 1-2 air loops (especially when using contrasting yarn), retreating from each other by 3-5 mm;

Repeat the work in a circle until the desired width of the knitted inlay is reached (usually 2-2.5 cm).

Making an openwork border

Let's analyze one of the options for tying the neck, relying on the proposed scheme:

1 p. - a chain of ordinary air loops;

2 p. - alternating pole. without nak. and arches from 3 air. loops;

3, 4, 5 p. - knitting in the arch: 2 pillar. with nak., 2 air. loops (3rd row), 3 air. loops (4 row), 4 air. loops (5 row), and in the column. bases - 1 column. with nak.;

6 p. - knitting in the arch 9 pillar. with 2 nak., alternating them with 1 pillar. with 1 acc. at the base;

7 p. - knitting in the first post. base 9 column. with 2 nak., alternating them with 1 air. loop, in the intervals between them - the execution of 2 arches of 4 air. loops;

8 p. - over arches of 9 pillars. with nak. execution of 4 arches from 3 air. loops, and on top of the arches from the air. loops - knitting a pillar. with 2 acc.

You can somewhat interpret the proposed pattern by finishing the work after completing the 5th row. Another, more compact openwork option is knitting 5-8 rows with an obligatory arched serrated edge.

How to crochet a neckline in the form of an openwork coquette?

In some cases, the work on finishing the open edge is done in reverse order. This means that first an openwork yoke is knitted, and then the whole product. This option is most often used in the manufacture of models with round trim parts. If the yoke should be square for an easier connection with the main fabric, increase in four places. The result will be corners adjacent on one side to the armhole, and on the other - to the upper horizontal lines of the front and back. At the same time, many products differ not only in the technology of making various details - an openwork yoke and the main fabric, made in dense ordinary knitting - various materials are often used. Now it is very fashionable, for example, to make an openwork yoke with a silk blouse. Or trim a knitted cardigan with a trellised collar.

Making the neck of fabric products with a hook

This knitted edging looks very fashionable. But, unlike knitted fabric, the fabric is quite problematic to crochet. What recommendations should be followed to get a beautiful neckline?

Use a knitting tool with a pointed tip to pierce the fabric more easily.

It is desirable that the structure of the thread and fabric match (for example, woolen yarn is more suitable for drape and a similar fabric).

Pre-treatment of the edge with an internal hem is required.

Of course, not all needlewomen succeed, and not everyone knows how to crochet a neck beautifully. But for sure, the tips and descriptions of patterns and patterns given in this article will help to make the decoration of products stylish, original and neat.

Such a simple way as tying a knitted neck with a hook will give your things a second life. An ordinary discreet dress, tied with a beautiful openwork pattern, will look much more attractive. Moreover, now knitted, or with some trimming in the form of openwork knitting, garments are in fashion.

We have several strapping options, which include a step-by-step description of the work, as well as diagrams and patterns for finishing the edges.

Crochet neckline patterns

An untreated edge can be trimmed with one of the proposed options. We will offer the main ways to crochet a neck, as well as give the product a peculiar look.

First way- this is a tying by the type of a narrow border. Such a not wide edging will look perfect on children's or light things made in openwork knitting.

Second way- this is a border smoothly turning into a collar with a width of approximately five to twenty centimeters. This option is suitable for any things.

AND the last way there will be a finishing ornament, a width of one and a half to five centimeters. Best paired with a medium thickness knit. Suitable for cuffs and neckline on a jumper or pullover.

We turn to the correct processing of the product with a description

Most often, the edges of the product, the neck and the edges of the sleeves are tied in the same way. Usually, the first row should be knitted with single crochets, after which they are woven according to any pattern you like. The simplest way is considered to be the "crayfish step", so let's start with it. Since its implementation will not be difficult, it makes no sense to provide a diagram, but the description will be more understandable.

To begin with, we tie the edge of the canvas with simple single crochet columns.

Then, without turning the work over, insert the hook into the remaining fragment of the base. Then you need to direct it forward, and pry the working thread stretched to the left through the hole. When two loops have formed, we knit them and, moving in the opposite direction, perform the “crawl step” to the very end of the row. The edging will look like corners obtained with overlapping threads.

Here are some easy options. You need to knit on a ready-made row of single crochets (shown in the diagrams as a chain of air loops).

** - fragment repetition.

In the first row, knit * 2 post. with a crochet and 1 air. loop*. Start the next row with an arch of four loops above the column, knit one column in the air loop without a crochet *.

In the third and last row we knit five columns with a crochet in the form of a fan and four air loops in one arch of the previous row. After that, we knit 1 column b / n into another arch *.

The first row consists of * double crochet *. In the second row we make a fan of four columns s / n and 3 v / n *. Third row: *in the column of the previous row we knit two columns of s / n, three air loops, a picot of 3 ch, three ch / p and a double crochet *.

The first row - *column b / n, 3 pico and three v / p, column b / n and five v / p over three loops of the last row *.

The second row - * knit a single crochet into an arch of air loops, and make nine air loops above the pico group *.

Third row - * knit nine single crochets over the air loop. In the column located in the previous row, tie one column w / n.

We try to qualitatively repair the neck of the finished product

Any knitted item tends to stretch with frequent use. The throat part is especially deformed. But with the help of a thread and a crochet hook, you can give a deformed thing a second life by tying a beautiful border around the neck. First you need to prepare the product.

To do this, first cut off the stretched collar or edging. If the fabric tends to fray, then it would be advisable to initially overcast the edge with a wide stitch, tucking the edge of the fabric inward by literally half a centimeter. If the fabric is made of fine knit, overcasting can be omitted.

So, we knit the first row with single crochets, while pulling the fabric down. To achieve the desired width, weave the same number of rows. At the end, fasten and cut the thread.

Create a beautiful border in the form of an openwork border

You can also make a border in the form of such an openwork border.

1 row: dial a chain consisting only of air loops.

2 row: this row includes alternating single crochets and arches of three v / p.

From 3 to 5 rows, knit in an arch: two columns with a crochet, two air. loops (third row), three air. loops (4th row), 4 in / p (5th row), we knit one double crochet into the base column.

6 row: we knit columns with double crochets in the amount of 9 pieces in the arch, alternating them with one column with one crochet in the base.

7th row: in the first column of the base we knit nine columns with two crochets, alternate them with one loop, and in between perform two arches of four air ones. loops.

8 row: over the arches of nine columns with crochets, make four arches of three loops, and over the arches of air. loop - a column with 2 crochets.

You can somewhat modify the proposed ornament by completing only the first or second part of it.

Video selection on the topic of the article

To give the newly knitted thing a complete look, you need to carefully tie its edge. At the same time, the knitted fabric will stop twisting, since its edges will become rigid, the old thing will take on a completely new look. This fairly simple job can be done in a variety of ways.

We bring to your attention video tutorials that tell you how to properly tie the edges of knitted products in various ways. It is not difficult to master them, and soon you will be able to give your work the beautiful look that they get after tying.

Very simple edge binding, quite understandable for beginners. The first row is knitted with single crochets, a French mesh is formed in the second and third rows, and fans are arranged on the fourth row, consisting of eight double crochets. This row is the most beautiful. The result is a border with a pattern composed of semicircular elements, the basis of which are connected fans.

For any fabric, it is enough to knit the first initial row, and then you can form a pattern. It makes a good edging for the collars of robes. It is simply sewn to the base material.

Video lesson:

The edge tied in this way becomes even and dense, resembling a pigtail. This method is used to tie armholes and necklines, the edges of the sides of knitted clothing, created with knitting needles or crocheted. This seam strengthens the edges of pockets and scarves. The method got its name because it is not formed in the usual direction from right to left, but vice versa, as if moving backwards.

You can use the same thread for tying with which the thing itself was knitted, but this thread can also be taken in a different color: the colored edging looks neat on any knitted thing, decorating its overall design with an unexpected frame.

Video lesson:

This beautiful finish consists of small pom-poms, each of which is attached to the edge of the material with two posts. It turns out a zigzag pattern, where a neat pompom is located at the top of each zigzag. The pattern looks very nice and smart. It can be used to decorate large items such as knitted blankets, shawls or pillows.

The use of "pompoms" creates a design that complements and highlights the knitted pattern that was used on the base item. For all the apparent complexity of the pattern, it is created very simply and quite accessible even for beginners.

Video lesson:

This method of tying the edge of knitted items is extremely simple, but looks impressive. Of the four columns without a crochet, a small bead is formed, dense and neat. A number of such beads, located close to each other, can decorate tightly knitted products, but they can also be suitable for patterned blankets or shawls.

Tying is not necessarily done along a straight edge; you can also tie curved surfaces, and even wavy edges. The resulting volumetric edge trim looks very nice if it is made in a different color, contrasting with the color of the main knitting thread.

Video lesson:

If there is a desire not only to strengthen the edges of a knitted item with a strapping, but to decorate them with an interesting pattern, try this knitting option. Their interlacing is formed with simple columns, and a pattern is obtained with arches and openings, repeated in two tiers.

For all the complexity of the pattern, getting it is quite simple - you just need not to get confused in the alternation of loops and in the arrangement of repeating columns. The pattern can be based on a completely arbitrary type of knitted loops, you can turn it over any knitted item, regardless of whether it was crocheted or knitted. It will still turn out beautiful.

Video lesson:

Five columns with one crochet, knitted in the same loop, form a small neat shell in which the loops make up the edge, and the columns form fan-shaped waves, as in a real shell. This is a simple and fun way to crochet the edge of a product, giving the edge of any knitted item an interesting look.

It is especially impressive if the shells are knitted from a thread of a different color than the main product, the resulting contrasting pattern perfectly frames any knitting. Even if the product is obtained by the simplest knitting method, its edging in a similar way gives it an interesting unusual look.

Video lesson:

It is proposed to tie the edge with a crochet hook for napkins or handkerchiefs in several versions. Napkins can be any, linen or silk, depending on the thickness of the fabric and the thickness of the thread used for edging. It is quite possible to use bobbin thread number 20-30 to match the tone of the napkin or in a contrasting color.

The handkerchief is cut out of the fabric strictly in the direction of the threads. One centimeter from each edge, one thread is pulled out, and for the resulting grooves we begin to make the strapping. A chain of loops is created along the edge of the napkin, which become the basis of the pattern created from the threads.

Video lesson:

Periodically turning the knitting over and using the instructions for creating the pattern, we get a fairly thick cord along the edge of the knitted item, resembling a caterpillar in appearance. A method of knitting such a pattern is also proposed without turning over the entire work, with intercepting the hook, which is convenient if an overall shawl or bedspread is knitted, which are inconvenient to turn over.

It tells in detail how to get a "caterpillar" on indirect, rounded knit edges, both convex and concave. In this way, sleeves, collars, the lower edge of the product and even the edges of caps are tied. It turns out a very decorative pattern.

Video lesson:

A small pattern is knitted from half-columns, fixed on every third loop of the row, and two loops are skipped. The result is a border of repeating small semicircles, following one after another. This border can also be knitted in a circle, detailed instructions are also given for this.

A large border will not come in handy for every thing, but still I want to somehow improve the appearance. In this case, a small border turns out to be ideal, which can be knitted from the same thread as the thing itself, or from yarn in a contrasting color. It is quite possible to decorate even a patterned knitted thing with such a border.

Video lesson:

We offer a master class on knitting borders. In every third loop of the thing being tied, a set of columns is made, which forms small neat semicircles. It turns out a simple, but very nice edging with a pattern of small semicircles.

This pattern can edging both solid and patterned knits, organize the edges of plaids and shawls, sweaters and cardigans. It will add grace and airiness to any pattern of the main fabric, harmonizing perfectly with any base knitting pattern. The border has a wave width of three loops, is not too conspicuous and serves as a modest decoration.

Video lesson:

It is quite simple to update a knitted blouse or make a new product more interesting - just crochet the neck. There are several well-known finishing techniques: some of them are used to process the neck in light dresses, cropped vests, summer jackets, others - in massive winter sweaters, poncho capes, pullovers. Our selection presents the most relevant ways to decorate the neck.

How to crochet a neck - an easy option

If you are new to knitting, go for a single crochet finish. Insert the hook from the back seam of the left shoulder. Pull the working thread out through the first edge loop, thread the thread through it and get two loops. Crochet the main thread again, pull through 2 p. And - the column is ready. Work around the entire edge.

This tying gives lightness to the product, so use it when making models from fine yarn - tops, T-shirts, blouses.

How to crochet a neckline - step by step

The essence of the method is that the strapping is carried out in the opposite direction - from left to right, that is, backwards (this is how cancer moves backwards in the river when walking, hence the name).

Fix the thread from the wrong side of the shoulder, bring it to the front and make an air loop.
*Catch the edge loop and pull the thread through it with the lift loop, leaving 1 loop on the hook*. Repeat ** until the end of the work.

Take a contrasting yarn for knitting and the thing will look new and elegant.

How to crochet a neck - knots

Canvas-type tying is very popular in products made from wool blend yarn. How to do:

knit a couple of centimeters with single crochets;
start making knots: * connect three airs with a connecting column with the first loop *, then skip four loops and again **.

How to crochet a neckline - pico

Typically, the pico element is used in the preparation of fantasy patterns, but this option is also suitable for decorating the neck of a jumper or sweatshirt.

Make a series of st. b / n, * pull out 3 in. p., lock them into a ring with a connecting column from the 1st c. *, knit 4 tbsp. b / n and repeat **. So - until full strapping.

How to crochet a neckline - openwork

Do you dream of looking elegant and feminine? Knit a blouse with an openwork neckline. Let's see how it's done:

border base - 1 row st. b / n;
2, 4, 6 rows - 3 in. p., 1 tbsp. s / n, 2 c. p., 1 tbsp. s / n, 7 century. P.;
3, 5, 7 rows - * 1 tbsp. b / n, 4 c. p. *, repeat ** to the end of the line;
8 row - * 3 c. p., 1 tbsp. s / n, 2 c. p., 1 tbsp. s / n * and so on **;
9 row - 4 tbsp. b / n, pico, 4 tbsp. b / n, pico, 3 tbsp. b / n, pico, 3 tbsp. b/n.

Do you want to freshen up a tired blouse? Make a guipure weave or tie a separate lace collar with subsequent sewing. Be sure - you will not see the second such little thing on anyone.

Knit with imagination, using our advice in practice, and soon you will learn how to create amazingly beautiful exclusive things.

We have several strapping options, which include a step-by-step description of the work, as well as diagrams and patterns for finishing the edges.

Crochet neckline patterns

An untreated edge can be trimmed with one of the proposed options. We will offer the main ways to crochet a neck, as well as give the product a peculiar look.

First way- this is a tying by the type of a narrow border. Such a not wide edging will look perfect on children's or light things made in openwork knitting.

Second way- this is a border smoothly turning into a collar with a width of approximately five to twenty centimeters. This option is suitable for any things.

We turn to the correct processing of the product with a description

To begin with, we tie the edge of the canvas with simple single crochet columns.

Here are some easy options. You need to knit on a ready-made row of single crochets (shown in the diagrams as a chain of air loops).

** - fragment repetition.

In the first row, knit * 2 post. with a crochet and 1 air. loop*. Start the next row with an arch of four loops above the column, knit one column in the air loop without a crochet *.

In the third and last row we knit five columns with a crochet in the form of a fan and four air loops in one arch of the previous row. After that, we knit 1 column b / n into another arch *.

The first row - *column b / n, 3 pico and three v / p, column b / n and five v / p over three loops of the last row *.

The second row - * knit a single crochet into an arch of air loops, and make nine air loops above the pico group *.

Third row - * knit nine single crochets over the air loop. In the column located in the previous row, tie one column w / n.

We try to qualitatively repair the neck of the finished product

So, we knit the first row with single crochets, while pulling the fabric down. To achieve the desired width, weave the same number of rows. At the end, fasten and cut the thread.

Create a beautiful border in the form of an openwork border

You can also make a border in the form of such an openwork border.

1 row: dial a chain consisting only of air loops.

2 row: this row includes alternating single crochets and arches of three v / p.

From 3 to 5 rows, knit in an arch: two columns with a crochet, two air. loops (third row), three air. loops (4th row), 4 in / p (5th row), we knit one double crochet into the base column.

6 row: we knit columns with double crochets in the amount of 9 pieces in the arch, alternating them with one column with one crochet in the base.

7th row: in the first column of the base we knit nine columns with two crochets, alternate them with one loop, and in between perform two arches of four air ones. loops.

8 row: over the arches of nine columns with crochets, make four arches of three loops, and over the arches of air. loop - a column with 2 crochets.

You can somewhat modify the proposed ornament by completing only the first or second part of it.