How to make a bracelet. A selection of master classes. Fabric control bracelets with full color printing

DIY fabric bracelets, in particular from old T-shirts, are a great idea. You will not only recycle the T-shirt beautifully, but also get an original and very stylish decoration. After reading our instructions on how to do it, you will see that it is very simple, and even a teenager can do it.

If your teenage daughter keeps asking for new jewelry, offer to make her own. She will surely like this master class with a photo of how to make a fabric bracelet with your own hands, in particular from unnecessary T-shirts.

In order to make a fabric bracelet with your own hands, you will need old unnecessary T-shirts, scissors, a glue gun (needle and thread or clasp).

So, how to make a fabric bracelet with your own hands. Since we offer to make bracelets from unwanted t-shirts, the first thing you have to do is find raw materials, that is, that very unwanted t-shirt. And cut it into ribbons to make the so-called yarn. Depending on which bracelet you want to weave, the strips will be wide (for a massive bracelet) or thin.

Now you have to decide what kind of bracelet you want. We offer several options for making a fabric bracelet.

The simplest version of a T-shirt bracelet. Just take the "yarn" and wind it around your wrist several times. Fasten the end with a knot. You can combine the "yarn" of several colors. If it seems to you that this fabric bracelet looks too simple, you can decorate it with beads or dilute ordinary threads with a braid, woven from the same yarn.

You can fasten the ends of the bracelet either with a special fastener, or sew the ends of the threads with threads, and hide the seam by wrapping it with a piece of "yarn" of the same color as the bracelet itself.

This fabric bracelet is a little more complicated. Just follow the instructions and you will be fine.

For a massive bracelet and fabric, you will need a video instruction.

The next fabric bracelet is not complicated at all. This is an ordinary braid, braided from yarn. To make the bracelet brighter, you can take three threads of different colors or add a bright cord to the threads of the same color. By the way, this master class shows how to fasten the ends of the bracelet with a magnetic clasp.

We offer the production of fabric control bracelets according to standard and non-standard projects. The soft fabric is pleasant to the body and does not irritate the skin, and the plastic lock allows you to adjust the length of the product.

As soon as a disposable wristband is worn, the visitor has the right to enter the premises and can no longer take it off to pass it on to someone else. A fashionable and colorful accessory becomes a proof of paid services and a confirmation of the status of a participant, and this product guarantees the organizers of the event the absence of troubles associated with visiting uninvited guests.

In addition to organizational functions, a control bracelet can carry important information, increase company awareness and help revive demand for promoted products. The unusual design of the product is sure to draw attention to the corporate logo of your company. When ordering control bracelets from the Badge Holder company, you get high quality full-color printing, prompt production, low prices and a clear fulfillment of your personal wishes for product design. Disposable fabric wristbands are an economical and effective way to promote your services.

Prices for Fabric Control Wristbands with Full Color Printing

Prices for Fabric control bracelets with silk screen printing

Prices for Digitally Printed Fabric Control Wristbands

Primary ribbon colors

Available mounting colors

Fastening color

• Black
• White

Why us?

The price of our goods is formed not only by us, but also by the customer. It directly depends on the quantity of goods, its quality and the timing of the work. We we make discounts regular customers. We develop new technological solutions that can also affect the price of products.

There are many ways to make beautiful and colorful bracelets with your own hands. By clicking on the photo, you will be redirected to an article with a detailed description:

A brief description of the process: we sew a tape from a dense fabric, a dense trouser-type tape is sewn inside for greater density, fasten the clasp, sew on various beads, pendants, connectors. For the intermediate connection, semi-rings of dense wire are used, similar to those that are sewn onto the belt of a bag. It seems to me that it would be possible to replace this part with some kind of bronze-colored connector or wide end cap for ribbons.

Here's another interesting idea for using tape. This bracelet is made from brass. But I immediately came up with the idea to beat a beautiful ribbon using a polymer clay blank.

In the same blog, the bracelet is crocheted from a dense synthetic cord-yarn, and after that a thin chain is threaded between layers of threads.

If you do not know how to knit, you can simply use a piece of knitwear and glue it to the base:

And this way is for those who like difficult ways. The base is woven with wool for embroidery:

In this basis, thick wire, braid with rhinestones and ordinary knitting threads are used:

Pretty much the same meaning here. Only not a braid was used, but a ball chain:

Another option for weaving on a leather cord:

You can wrap the base not only with a waxed cord, but also with a fabric ribbon:

Or like this, more organized with ribbons:

And if you add decorative details:

I already gave a link to a bracelet of this type. But for the company one more time. various decorative elements are attached to the clasp, and then braided. A great way to recycle all sorts of ribbons, assorted chains, etc.

Chains are generally convenient for bracelets - they are strong, do not stretch, you can attach any clasp, they are easily decorated. For example, with these colors:

Here is another simple version with chains:

Another simple way is a bracelet on pins. This will require a few pins and a clasp:

Flowers can also be attached to a piece of fabric, as in this romantic bracelet:

Or like this:

What an interesting way to process the seam with a chain on a fabric bracelet:

Or even like this:

And here is a simple option for girls or a beautiful rep ribbon, with an elastic band. Literally one line on a typewriter:

And in this weaving, not beads, but nuts were used:

Another way with nuts:

Another way to make a braided bracelet with beads:

Or like this with small beads:

Slightly different model. If you wove rings from colored wire as a child, then the skill will come in handy for you to weave such bracelets from rope, cord, fabric and any dense material:

Or like this from a thick synthetic cord:

I like this variant of the clasp for braided bracelets even more.

Or weave from beads in several rows. Like in this necklace bracelet. For fastening, you can use crimps or skufeyki:

Another beaded bracelet:

Another option for the most patient. The bracelet is woven using macrame technique from threads for embroidery:

How did we forget about fashionable Shambhala bracelets:

And here are some more simple bracelets. In the style of shambhala bracelets:

Or here's a simple way to use beautiful connectors. How to make a slip knot is generally a very useful science. This method of fastening is perhaps the most convenient for making children's jewelry:

In general, any element with two holes will do. For example, a hook fastener:

Another simple option for girls using old bijou elements. The elements are simply sewn onto the cord base.

Braiding metal beads. The thought pulsated - to stick beads of this shape from polymer clay):

recycling option. Thick wire is threaded into the cord-seam of old jeans. You can further simplify the process if you use a memory wire, for example, here such a thickness of 1mm or even wider .

In general, memory wire is a gold mine. No clasps are needed, no special tools, just beads are strung on a wire, the ends are tucked into a ring. for such cases it is better to use

And here the lace is glued to the base ring for the bracelet:

A bit of polymer creativity.

How to make a one-piece polymer clay bracelet by clicking on the photo:

But I won this bracelet in one game, it will come to me soon. Master class on making a one-piece bracelet by clicking on the photo:

Another original and easy way to create a bracelet. To decorate the ends of the bracelet, you can use not only end caps, but also large caps. We recently brought large limit switches, see in this section:

That's all, not today! Have a good handmade evenings and sunny mood!!!

A fashionable bracelet is an indicator of the owner's sense of style and taste. Such an accessory will complement any image and make it complete. The main thing is to choose the color and shape. After all, not every bracelet looks good on everyone. Therefore, you can make the most suitable thing for yourself with your own hands.

Fenugreek

The most fashionable bracelets now that you can make with your own hands are shambhala. Decide on a color that matches most of the clothes in your wardrobe and start choosing materials. What you need for work:

• Three meters of waxed cord.
• ten beads.
• Scissors.
• Colorless nail polish.
• Board and two nails. This is necessary for weaving. Drive nails into the board at a distance of 30 centimeters from each other, you get a machine. It can also be purchased at a craft store.

This set of materials is suitable for beginner needlewomen. Having learned how to weave a regular Shambhala bracelet, you can master more complex techniques.

How to make a bracelet

1. Tie the edge to one nail
2. Pull it to another nail, leaving an extra five centimeters, cut it off.
3. String existing beads on it in the required order, starting after ten centimeters from the nail.
4. Pull the cord well and tie it to the second nail.
5. Cut 2.5 meters of cord. Step back two centimeters from the nail and tie through the center of the cut one. That is, the edges from the node should be the same length.
6. It should turn out so that the left part sticks out higher from the node. We start weaving with it. Pass it under the main thread and over the right.
7. We draw the right part above the main one and under the left one.
8. We tighten. The result was a node that will be used throughout the work.
9. If you did everything right, then the right side sticks out higher.
10. Now the right segment passes under the main thread and above the left part.
11. The left part is above the main and under the right cord.
12. We tighten. Weave twenty knots according to this plan.
13. You have almost learned how to weave a fashionable Shamballa bracelet. Now we add a bead to the usual knot. We braid it.
14. After the three base knots, another one with a bead follows.
15. Keep doing this until you run out of beads.
16. Weave fifteen more basic knots.
17. Remove the bracelet from the machine. Stepping back five centimeters from the base knots, weave two simple knots on the main cord. Cut off the rest.
18. Lubricate the last knots with prepared varnish.
19. To make a comfortable adjustable fastener, you need to close the edges of the main cord into a circle. We direct the ends of the cords with knots towards each other. With the ropes that did the main work, we make five basic knots.
20. Make simple knots on the remaining cord, cut off the rest. Lubricate with varnish.

You have learned how to make a simple version of the Shamballa bracelet. Experiment with bead diameters, colors, and even the number of rows.

fashion trend

Fashion is very relevant now. Do not be afraid of a large number of them, wear them on both hands, but make sure that the accessories are combined with each other in shape, texture or color. Use large sizes. How to do it? You will need an ordinary plastic bottle for the base and improvised materials for decoration. It can be a fabric of different textures, rhinestones, threads, paint, varnishes, brooches.

Progress:

1. Cut out a four-centimeter-wide bracelet from a plastic bottle.
2. If the bottle is colored, and you are going to work with a transparent material, then glue the base
3. Take a fabric with a design that suits you. Cut off a flap that is one and a half centimeters larger than the base on each side.
4. Glue a bracelet on them.
5. To trim the inside of the bracelet, use masking tape.
6. Cut out another strip of fabric and glue it inside.
7. Sew or glue beads, stones, rhinestones.

A lace or guipure accessory will look very gentle. You don't need to add extra details to it. This fashionable bracelet is notable for the fact that it requires minimal money and time. Each dress can have its own unique decoration.

Ethnic style

What bracelets are fashionable for more than one season? In ethnicity. They are easy to make from felt and floss threads matching it in color. Commonly used red, black, yellow, orange, burgundy, brown, white. As an example, take the felt of the last three colors and suitable threads.

Progress:

1. Measure the circumference of your wrist and add three centimeters. This length should be the product.
2. Draw circle patterns on paper. Two will be 4 centimeters in diameter, four will be 3, they are used for the base. Only half will be visible, the rest are needed to hide the wrong side. And cut out a few smaller circles for decoration.
3. Embroider a pattern on the smallest details, thus attaching them to the middle ones. It can be stitches and zigzags.
4. Now connect the middle parts with the largest ones in the same way.
5. Collect the bracelet. A photo of the finished product will help with this. Fold pairs of circles and connect with a decorative stitch.
6. Fasten the pieces to the sides.
7. For the fastener you will need two burgundy rectangles and a white one. The last one is a little shorter, make a hole in it for a button
8. Sew on a button.

The work is over. You can come up with different versions of this bracelet by changing the shape of the felt.

Polymer clay

Polymer clay is an excellent material for making a bracelet in ethnic style. Here you can use any colors, patterns and shapes. For work, you will need stacks for plasticine and improvised materials. Twist the bundles, make circles, squares, semicircles, leaves. Try any size. The bracelets are thin, so you need to make several of them at once and wear them together. The material is comfortable and supple, takes shape well, so it will not be difficult to work with it. It can harden in an oven or on its own.

Men's accessory

Fashionable made with love, will be a gift for a young man, friend or father from a girl. After all, the strong half is not fond of needlework. You can make such a thing according to the technique already known to us, used in weaving a Shambhala bracelet. Just don't use beads. For a man, a wider bracelet is suitable.

Materials:

• Lace or rope. You need to calculate as follows: per centimeter of the bracelet is 13 centimeters of cord. That is, for a 20-centimeter wrist, 2.5 meters of material is needed.
• Scissors.
• Buckle.
• Lighter.

Progress:

1. Tie a knot at one end of the buckle so that there is the same length of cord on either side of it.
2. We pass the ends into the second part of the buckle. A cord should be stretched as long as a man's wrist.
3. Bend the edges of the cord so that you can weave according to the principle of a Shamballa bracelet.
4. We skip the left part of the lace under the main threads and above the right part.
5. The right thread above the main and under the left.
6. Continue until you reach the second part of the buckle.
7. Solder the ends to the product with a lighter.

Leather bracelet

To please your man, learn how to make fashion bracelets with your own hands. MC will help you with this. Take a piece of leather and a clerical knife. Progress:

1. Cut a rectangle out of leather 3 centimeters larger than the desired size of the product.
2. Draw a drawing with a clerical knife.
3. Draw simple parallel lines that will later become weaves.
4. Cut the design on the skin by about a third of the thickness.
5. Cut the strips along the entire depth.
6. Tie them together and secure with a stick.
7. Punch holes along the edges for fastening.
8. Put the bracelet on the jar for ease of use.
9. When finished, boil the bracelet along with the jar. At this point, the accessory will take the necessary shape, and the pattern will look like a carving. The boil lasts three minutes.
10. Cool the product, correct the defects. Wrap the protruding sides of the skin with a cloth.
11. Polish the bracelet with sandpaper and coat with shoe cream of a suitable color.

Basic Techniques

The simple techniques described above will help you create a unique fashion bracelet for yourself and your boyfriend. If you are a creative person with time and a good imagination, then be sure to try making an accessory with your own hands.

A fabric control bracelet is a great solution for organizing attendees at any event. The product will serve as an entrance ticket, identification and separation of guests. Bright bracelets will decorate any holiday and help convey advertising information to the target audience. This production is ideal for events that last one day.

We offer the production of fabric control bracelets according to standard and non-standard projects. The soft fabric is pleasant to the body and does not irritate the skin, and the plastic lock allows you to adjust the length of the product.

As soon as a disposable wristband is worn, the visitor has the right to enter the premises and can no longer take it off to pass it on to someone else. A fashionable and colorful accessory becomes a proof of paid services and a confirmation of the status of a participant, and this product guarantees the organizers of the event the absence of troubles associated with visiting uninvited guests.

In addition to organizational functions, a control bracelet can carry important information, increase company awareness and help revive demand for promoted products. The unusual design of the product is sure to draw attention to the corporate logo of your company. When ordering control bracelets from the Badge Holder company, you get high quality full-color printing, prompt production, low prices and a clear fulfillment of your personal wishes for product design. Disposable fabric wristbands are an economical and effective way to promote your services.

• 
  
• 
  
• 
  
• 
  
• 
  

  Control bracelet made of polyester tape

• 
  
• 
  
• 
  

  Control bracelet, one-color silk-screen printing

• 
  

  Control bracelet made of polyester tape, full color printing

• 
  

  Control bracelet, two-color silk-screen printing

• 
  

  Control bracelet, full color printing

• 
  

  Control bracelet, single color printing

• 
  

  Control bracelet, silk-screen printing two colors

• 
  
• 
  
• 
  
• 
  
• 
  

  Price list for fabric control bracelet:

  Fabric control bracelet with full color printing (polyester smooth ribbon). Fabric control bracelet with silk-screen printing in 1-2 colors (rep tape).

  Name	Photo	vendor code	100 pcs +	300 pcs +	500 pcs +	1000 pcs +
  Fabric control bracelet with full color printing (satin ribbon).		TB-A	55 rub.	40 rub.	35 rub.	call
  	TB-P	60 rubles	45 rub.	40 rub.	call
  	TB-R	50 rub.	35 rub.	30 rub.	call
  Fabric control bracelet with digital full-color printing (polyester).		TB-C	60 rub.	45 rub.	40 rub.	call
  Additional Information:
  The standard width of the control bracelet is 15mm. The standard length of the control bracelet is 330mm. The standard production time for bracelets is 7 working days.