How to make a bell to ring. Bells for the Christmas tree master class. Gold and silver bells from glasses

As a rule, Chinese wind chimes, or the so-called wind chimes, are made from hanging pipes, sticks, bells made of wood or metal. They are hung outdoors, they serve as an excellent decoration for the main entrance, terrace, balcony or garden.

Bells can be made from simple pencils, and from buttons, and even from ordinary iron caps. And then proudly hang the result of your creativity, for example, on the terrace of a country house.

However, see for yourself:

coast wind music
Many have shells brought back from their vacations at home. So why not use them to create unique wind chimes? You will need a pretty branch, a few sheer threads, and an object that can be used to poke holes in the shells.

Pencil bells
You can also make bells out of stationery. For example, take a ruler as a base and hang colored pencils from it.

Bells from flower pots
You can also use small ceramic flower pots: just paint them and hang them on ropes. You can also paint leaves and flowers on them, however, do not forget to apply a protective fixing layer after painting.

Bells from children's toys
Her one original idea is to make wind chimes from an old children's xylophone: use the colored parts and hang them on a metal base.

just use fin pieces and some pretty shells. Drill small holes in the pieces of wood and attach them to the beaded shells.

Bells made of pebbles
Pebbles picked up on the beach can also be a great bell. To do this, make a small hole in each stone and fasten them to a wooden base, adding beads to the end of the thread to secure it.

musical items
Kitchen utensils can be creatively used to create wind music, it can be spoons, forks, whisk, spatula

Earring bells
Yes, yes, earrings are needed not only as jewelry. Hang the earrings on the round base and you will get a charming wind chime.

Vintage wind chimes
Be practical: put trash to good use. You can combine various unnecessary things into one - into Chinese vintage bells.

bottle caps
When opening a bottle of drinks, do not throw away the caps: they will make an excellent Chinese bell.

colored keys
You can also use extra or unnecessary keys, just paint them and hang them from a branch.

teapot bell
Use a teapot with a lid, beads, chain, cable clip, cable and rings. This bell can be used indoors and outdoors.

Fin
A fin bell can be a very original decoration, you will need the fin itself, a rope, a drill, which will need to make holes.

silver spoons
Bells made from silver spoons are very original. Spoons are suspended from a base made of a fork. The presence of beads at their ends gives the system an additional charm.

garden bells
These bells are simple and beautiful. They are made from dry branches or driftwood, pottery shards, fishing line and beads, and look especially good hung on a tree.

metal cans
If you have a few empty metal cans, then you can use them to create that same wind chime. Simply paint the jars different colors, make a small hole in the bottom of the jar and then secure with string or string. Use a knitted hoop or any other round object as

Christmas tree toy "Christmas bell" Master class with step by step photos.

Crafts with children for Christmas from junk material.

Sidorova Zoya Grigorievna, teacher of the MBDOU "Kindergarten of the combined type No. 8" Aistenok ", Michurinsk
Description: this master class is intended for children from 6 years old, educators, teachers of additional education, loving parents and creative people.
Purpose: Christmas decoration, gift, and also can serve as work for the New Year, Christmas exhibition, competition.
Target: making crafts from waste material - egg cells, using paper napkins.
Tasks:
Learn how to use waste material to make crafts.
Familiarize yourself with the technique of performing trimming.
Develop creativity, imagination, fantasy, aesthetic taste.
To cultivate diligence, patience, accuracy, the desire to bring the work begun to the end, the desire to do something pleasant for relatives and friends.

Dear colleagues, today I want to present a master class on making a Christmas bell toy. This master class is designed for children 6-7 years old. The work will be of interest to everyone who likes to please friends and relatives during the Christmas holidays.

Some interesting information
The main decoration of Christmas is a spruce, or, as we used to say, a New Year tree. In the harsh winter, they were decorated with candles and all kinds of decorations.
This tree will be your home tree tonight. This is the tree of the world, a sign of the infinity of life, since all its branches always remain green. Look how it is directed to heaven. Let's gather around him and meet this day with gifts from the heart and the fire of candles, the ringing of Christmas bells.
Have you ever wondered why bells ring loudly at Christmas?
Winter pagan holidays could not do without bell ringing - from there this tradition came to us. In winter, it was believed that the sun had died and there was a strong evil spirit. To drive away the evil spirit, it was necessary to create a strong noise. Until now, the tradition has been preserved at Christmas to ring the bells loudly, while singing and screaming loudly. In Christian churches, bells greet the coming of Christ.

Silver Christmas Bell
He rings, rings until the morning,
His ringing is heard everywhere, far away,
It means joy again - Christmas!

Today I bring to your attention a master class on making a Christmas tree toy from egg cells.
Materials needed for work:
1. A cell from under the eggs.
2. Paper napkins.
3. Gouache, plasticine.
4. Cardboard.
5. Glue "Moment".
6.Ruler, simple pencil, paint brush,
7. Stapler, measuring tape, satin ribbon (width 0.5 cm, length 30 cm), fastening from a Christmas decoration, 2 beads, decorative ornaments.

Step by step workflow
The teacher prepares the elements from the cell in advance by cutting a strip of the cell with a knife.

Then he divides into parts. (we distribute the cut parts of the cell to the children, ready for painting)

Paint the base for the bell with gouache

You can use gouache of different colors

We paint blanks with gouache, choosing a pattern as desired

We measure the diameter of the workpiece with a centimeter tape (I got a length of 19cm)

From cardboard we cut strips 1.5 cm wide, 19 cm long (one strip is needed for one bell)

We cover the cardboard strips with a layer (1-2mm) of plasticine

Smoothen the surface evenly

We attach a strip coated with plasticine to the lower edge of the bell with a stapler or glue "Moment"

Decorate a strip coated with plasticine with trimming
We cut paper napkins into squares with a side of 2 cm (the larger the size of the square, the higher the pile)

For further work, we need to prepare a tool for facing. We use a sharpened pencil. Put the pencil tip in the center of the square.

Crumple the square and roll the tip of the pencil between your fingers. We will get a tube-end.

We press the trimming on the plasticine and take out the pencil.

We stick each next trimmer into plasticine next to the previous one. We try to put the trimmings tightly to each other so that there are no gaps.

Thus, we fill the entire workpiece.

Facing can be done with napkins of the same color, or you can use several shades to depict a pattern.

Decorate the bell with a bow
With a sharp object we make a hole in the upper part of the bell (the bell blank is soft, you can pierce it with a ballpoint pen)

From below we insert a satin ribbon (30 cm) with a loop. In this case, the two ends of the tape remain at the bottom.

Tie a bow from a loop

Finished mount from a Christmas tree toy

Insert into the hole in the top of the bell

Attach the beads to the ends of the satin ribbon

You can add decorative embellishments if you wish.

The Christmas bell is ready, you can put it on the Christmas tree.

It is better to prepare for the New Year in advance. Making your own hand bells for the Christmas tree is a good idea. Even in the writings of ancient authors, the ability of bells to drive away evil forces was reflected. There are many options for making wind chimes from scrap materials. We have selected the most original of them.

We will need:

Bandage or gauze.
Eggshell.
PVA glue.
Tassel.
Paints (including gold).
Putty, beads, semolina (optional).

Manufacturing Method No. 1

We take the shell and bandage. We glue the bandage "overlap" with PVA glue.

We strengthen our bell, it should dry well.

Primed with white paint so that the shell does not shine through. When the bandage is dry, cut out the petals with scissors.

Make a hole at the top with a sharp object. The hole is for the string. Glue the husk on top and paint.

Bells are painted with Easter dyes + watercolors. The leaves of the bells can be safely bent.

Manufacturing Method No. 2

We take the shell, bandage and PVA glue. We glue the shell inside. This is also a way to strengthen the shell. Leave to dry on the battery. Then we cover the outside with white paint.

Cut off all unnecessary with scissors. Cuts easily.

After we apply putty and you can paint it with a pattern. Let's dry. We paint and go through the bulges with gold paint. We make a hole for the lace on top.

You can decorate it with beads on top, you can make a “spraying” of semolina. We coat the top with a brush with glue and sprinkle with semolina. Turn on the fantasy and make a toy.

For 1 bell you will need:

Styrofoam or cardboard (cone, mini size).
Yarn or twine.
Felt.
Palettes.
Decorations.

Tools:

Glue is universal.
Scissors.
Needle.
Tweezers.

We will need:

Plastic cups.
A branch of an artificial Christmas tree.
Spray paint.
Glue.
Beads.
Ribbons.
A piece of lace.

We take two plastic cups (you can use yogurt). We paint cups and a spruce branch with spray paint. Color can be any: golden, silver, bright red.

While the cups are drying, prepare the decoration. You can cut flowers from lace, guipure. Sew beads in the middle.

We coat the flowers with glue and attach to the bell.

We wrap the edges with yarn.

We take a beautiful ribbon, collect it in the middle on a thread with a needle and make a magnificent bow.

Fasten the bow with a needle and thread. We hang it on a Christmas tree or glue the bells together at an angle, glue it to a spruce branch and hang it on the wall with adhesive tape.

A small ringing bell carries a lot of symbolic meaning. This cute interior element symbolizes the beginning of a new year: whether it's the academic or calendar year. It is for these reasons that a gift in the form of a hand-made bell will be relevant to so many people: schoolchildren, students, relatives and relatives. In our article, you will learn a lot of useful information on how to make a bell quickly and easily with your own hands, using a variety of techniques, techniques and materials.

We make a souvenir bell with our own hands from an old cup

Such a handmade craft can be a wonderful gift for your student or teacher on September 1st.

You will need the following materials:

A beautiful tea cup with a handle;
Decorative jingle bells;
Satin ribbon to decorate the design;
Superglue "Moment";
Nice thin lace.

Tie a small piece of thin string to the decorative bell. Glue this design to the bottom of your tea cup from the inside. Glue another piece of string on the outside of the cup. For it, your cup will be suspended, so fix it as tightly and securely as possible.

Tie the string on the outside with a bright wide satin ribbon, tie a large bow out of it and fix it. If you wish, you can make a bow using the kanzashi technique.

Your bell is ready! Such a bell will perfectly cope with the role of giving the last bell at graduation in the academic year.

Let's analyze simple and affordable ways to make a toy bell

As a New Year's toy that can decorate your fluffy Christmas tree or apartment, you can make a bell from disposable cups.

All you need to do is thread a beautiful string into a colored plastic cup, hang a large bead and decorate the sides with decorative stickers or drawings. As a decor, you can use confetti, tinsel, sequins, rhinestones, beaded decor or New Year-themed napkins. An indispensable addition to such a bell will be a bright or contrasting dark satin ribbon.

Another easy and fun way to make Christmas bell crafts is to decorate eggshells.

Take the eggshell, bandage and PVA glue. Glue the egg shell inside with a bandage and PVA glue. Thanks to these actions, you will strengthen the egg walls. Leave to dry completely on the battery. Then cover the outside of the shells with white paint.

Cut off everything unnecessary and superfluous with scissors.

After that, apply putty on the surface of the shell and you can paint it with a beautiful festive pattern. Let dry completely.

Next, start coloring the eggs. Paint and go over the bulges of the bell with gold paint. Make a hole in the top for the string. Instead of a string, you can crochet or knit a chain of air loops and tie it to the shell.

You can decorate the surface of the egg bell with beads, you can make a "spray" of semolina. Spread on top with a brush with glue and sprinkle with semolina.

You can also make bells out of paper or foamiran. For breast bells, you can use special stencils, with the help of which even the most inept master can cope with the task and create very cute bells in the shortest possible time. These coloring pages can be purchased at many magazine kiosks, stationery stores, or simply printed off the web. Such a blank must first be painted by hand, and then carefully cut along the contour and, if desired, glued onto a thicker sheet of paper or even thin cardboard.

In order for paper bells to look fun and bright, it is better to stop using ordinary colored pencils or thin felt-tip pens and use acrylic paints or thick markers.

Add voluminous and convex details and accessories to the decor of the bells. So, on a paper bell, you can glue a multi-layered appliqué flower or a neat silk ribbon bow in contrasting shades. Alternatively, this bow can be strung on a decorative needle-hairpin with a mother-of-pearl pearl at the end instead of the eye of the needle and with its help pin the bell to the buttonhole or breast pocket.

A selection of videos on the topic of the article

All the videos we have selected will help you learn how to make bells quickly and easily with your own hands. Watch the videos and learn even more new tricks and secrets, as well as ideas for creating extraordinary compositions.

A good fisherman's equipment is always in perfect order. After all, otherwise do not wait for a rich catch. An important role in the assembly of gear is played by a bite signaling device, which should be quite sensitive in time to fix the fact of the approach of the fish, thereby prompting the fisherman the time to hook and fish.

Many purchased signaling devices are similar to each other in terms of the principle of operation. There are devices with the performance of sound and light functions at once. It is quite possible to make a simple mechanical device like a bell or a rattle with your own hands, which will be no worse than purchased models, and the savings will be decent. The bell is mainly used for feeder fishing by attaching to the tip of the spinning rod.

As vibrations appear on the water, the device will begin to make sounds, and the angler will no longer miss his prey. How to make a bell yourself with good sensitivity when casting gear over long distances, what material will be required, how the device will work should be considered in more detail in the form of step-by-step instructions in this article.

How to make a bell with your own hands?

A bell is a simple acoustic bite signaling device, the features of which include:

How to catch more fish?

I have been active fishing for quite some time and have found many ways to improve the bite. But the most effective was and remains.

It attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates their appetite. Suitable for both summer and winter fishing.

lack of interference when fishing fish;
low cost and can be invented from improvised materials;
ease of use;
quick recognition of bites;
sound signals without delay;
Can be used for day or night fishing.

The signaling device during fishing begins to act like a rattle, immediately emitting vibrations on the water when biting. Of course, you can buy a regular bell in the store and make improvements to improve the signals.

In order to save money, it is easy to make the device yourself at home:

cut off from a thin-walled rubber hose (3 mm in diameter) a ring 1.5 cm long;
make a small cut on one side of the hose to get an oval;
pull off one side of the rubber, cut;
pass a bolt of a suitable size through the eye of the bell;
drill a small hole on the cut side of the rubber ring according to the diameter of the bolt;
pass the bolt through this hole with the cap inside;
wind the fishing line around a circle 1 m long;
tighten in the form of a loop;
connect the bell by tightening the nut;
screw in another nut to lock the first one.

As a result, you should get a bell with a rubber hook, which will remain hanging on the fishing line closer to the tip of the fishing rod in order to avoid losing the device at the time of hooking.

This design is quite simple and will start to work immediately after casting the tackle and when the fish approaches.

What will be needed for this?

For mounting a bell, a handy material can actually be anything:

springs, contacts from an old alarm clock;
pieces of plastic;
LEDs (can be removed from an old mobile phone);
batteries (3 V);
reed switch (can be removed from any radio component);
magnet for mounting to a metal plate;
insulating tape;
metal thin plates;
light tubes to simplify the process of tracking fishing when fishing on a feeder at night;
dye.

Tools

To make a classic version of a bell-shaped strumming rattle, you will need:

clamps, ordinary clothespins for fixing to feeder gear;
rubber band for fixing the bell;
wire;
nuts or bolts;
threads;
needle;
hollow balls with bearings to create a sound effect;
spiral wire (10-12 cm long);
LED, indicator, if desired, make an electronic luminous device.

The bell as a bite signaling device is an excellent device when fishing on a feeder for modern strikes.

Manufacturing

It is possible to make a signaling device even better than other purchased models, which often fail in operation. So the bell can turn out to be correct, which will avoid false bites and fish coming off, and it can be used for quite a long time. When hooking, the device will not fly off the tackle, and therefore interfere with the process of fishing.

When making a simple homemade sound device, the steps are as follows:

take spiral wire in length 10-12 cm;
take bells in the form of 2 hollow balls with bearings inside;
attach to the wire
on one side put a clothespin on the wire, press one of the sides of the bell;
attach the bells to the tackle rack, leaving a small gap to ensure the free movement of the bell and the timely transmission of vibrations on the water.

To make a mechanical side bite alarm for bottom tackle fishing, thus providing the best signals on the water, which is important in difficult weather conditions you can go the following way:

take a springy steel wire 20 cm long;
give it the shape of an arc;
attach one end to a metal tube, pre-drilling a hole and bending the tube at an angle of 90 degrees
attach the wire to the tube using Moment glue
process all connections;
pick up a mounting clamp and drill holes in it;
insert a tube into it so that it is parallel to the fishing rod;
screw the tube into the hole so that it is fixed quite steadily and does not shake;
put a collar on the rod.

Such a signaling device will bend down to the feeder when the tackle is pulled at the moment of bites.

pros

Bells are simple mechanical sound structures that you can make yourself with handy materials. There are different variations of attaching the structure to the feeder or spinning gear.

The main advantages of a simple device:

excellent performance in any weather;
the possibility of using when fishing on reservoirs with winding banks and many cliffs;
adaptability to improvements as necessary by manufacturing, for example, electronic devices;
no breakage when wet, sharp jerks of fish
ease of use;
lack of interference when fishing for fish due to the ease of the device;
creating a rather pleasant fishing process.

The main thing is to properly assemble the bell so that the signals do not arrive late, and the device accurately predicts the moments for making hooks, especially when catching fish from a long distance.

Refinement of the bite signaling device “bell”

You can increase the sensitivity and functionality of the signaling device if you modify it and again on your own, without buying expensive devices.

So, as a receipt of a device with a firefly - a beacon, you will need to work:

foil or chocolate wrappers, which can be twisted into a tube around the main fishing line;
lateral nod in the form of a metal rod by attaching one end to the top of the feeder gear to increase sensitivity;
chemical capsules(2 pcs) with a substance inside to create a glow on the water when a chemical reaction occurs as a result of bursting one capsule and mixing with the contents in another;
piezoelectric element, which can be taken as the basis for the design;
magnet with sensor when, when connecting the elements, the sensor will quickly receive sound signals;
squeaker, taken out of a children's toy for self-manufacturing of an electronic device;
indicator pendulums to reflect bites when using bottom gear;
plastic tube with a loop at the end for attaching a bell.

On a note! When using a pendulum indicator, the main thing is to set it correctly in relation to the rod, i.e. at an angle of 45 degrees, so that it reflects the strengthening, weakening of the stretched main line in a timely manner.

So, as a simple refinement, to add a light effect to the bell, you can take 2 chemical ampoules and attach it to the top of the fishing rod or the side nod. The indicator will begin to create the effect of photoluminescence and glow on the water when one ampoule is destroyed and the chemical compositions are mixed. When biting, you will need to pull the feeder rod slightly towards you. Bites will be clearly visible even with a strong current in the pond.

Refinement of the holder of the bite signaling device

With the accumulation of experience, many anglers begin to complete, modify their gear, taking into account the characteristics of the reservoir, weather conditions. Usually improvements take place directly at the place of fishing by using handy and randomly found materials.

To refine the signaling device holder, which is important when arranging a large number of gear and visual tracking of all at the same time, you need to:

take a rubber hose 3 cm in diameter with thin walls;
cut a ring 15 cm wide;
make an incision on the ring;
thread into the ear of a bell;
fasten with a bolt.

Do-it-yourself bells are distinguished by a special sound that can no longer be confused with the sounds of nearby fishermen - neighbors.

Assembling the bell

The feeder itself is quite sensitive gear, but with a strong gust of wind or surf, the visibility of bites is significantly reduced. In this case, a side signaling device or a quivertip, which you can buy, just comes to the rescue.

If a home-made device in the form of a rattle - a bell is ready, then it remains to assemble it and check it in operation:

attach the nod to the fishing rod, planting on a plastic clamp at an angle of 45 gr;
stretch out through a nod main line;
bend down as close to the rod as possible;
mount magnet at the end of the arc;
connect the battery to the rod, LED, squeaker, reed switch, if you need to create a light and sound device;
attach the bell to the string wire to achieve greater sound;
make a vertical cut at the bottom of the tube, retreating about 1/3 of its height;
stop the structure locking ring so that it moves heavily back and forth in order to determine the degree of penetration of the gear when lowering into the water.

If you buy an ordinary bell, then you can assemble the signaling device as follows:

take a wine cork, drill a hole in the middle for a bell;
pierce the cork diagonally with a needle and thread so that the needle goes into the drilled hole;
put a little glue on the ear of the bell;
drill a hole in the cork so that the ear fits snugly;
after the glue has dried, make a slot for the fishing line over the cork;
connect the structure together, leaving the free end of the fishing line of the required length.

Thus, you can make an electronic alarm yourself and thereby simplify the process of fishing.

Price

The price of bells can vary from 15 to 240 rubles, depending on the material used and the accessories included in the model:

SIWEDIA brand single bell – 8-10 rub .;
double bell made of plastic with a clothespin — 9 rub .;
bell in the form of double bells - 10-12 rub .;
fluorescent firefly - 10-12 rub .;
fixture with a double nest for a firefly - 15 rub .;
a device in the form of a large rounded bell in gold - 39 rub .;
sleeve on a clothespin - 54 rub .

Experienced anglers are quick to advise:

use a more sensitive nod in the manufacture of the bell from a metal thin plate;
using light tubes for the manufacture of fireflies, it is desirable to paint them in bright colors;
side bite alarms are preferably made independently rather than buying expensive appliances that can quickly fail, or cannot withstand getting wet, sharp jerks of fish;
when casting tackle, it is better to turn off the sound signaling device, so as not to disturb once again the fish that may be nearby.

With the correct manufacture of a bell using diagrams, instructions and recommendations from experienced anglers, it is quite possible to make a good signaling device with efficiency and functionality no worse than other purchased models.

How long have you had a really BIG CATCH?

When was the last time you caught dozens of HEALTHY pikes/carps/breams?

We always want to get results from fishing - to catch not three perches, but ten kilogram pikes - this will be a catch! Each of us dreams of this, but not everyone knows how.

A good catch can be achieved (and we know this) thanks to good bait.

It can be prepared at home, you can buy it in fishing stores. But it is expensive in stores, and to prepare bait at home, you need to spend a lot of time, and, to tell the truth, homemade bait does not always work well.

Do you know that disappointment when you bought bait or cooked it at home, and caught three or four bass?

So maybe it's time to use a really working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?

It gives the very result that we cannot achieve on our own, all the more, it is cheap, which distinguishes it from other means and there is no need to spend time on manufacturing - ordered, brought and go!

Of course, it is better to try once than hear a thousand times. Especially now - the season! When ordering, this is a great bonus!

Learn more about bait!