How to make daisies from plastic bottles. Flowers from plastic bottles for the garden, garden and cottage - photo and description of how to do it yourself

To decorate your garden, you can make crafts from improvised materials, such as daisies from plastic bottles. Many simply throw them away, not realizing such an unusual application. Such crafts will help transform the cottage, make it unusual. By turning on the fantasy, you can come up with many options.

Photo: what can be made from bottles

Unusual cacti will help you mentally transport yourself to the hot desert. They are made of green plastic and decorated with flowers made of the same material.

If you take a lot of empty containers and fasten them together with adhesive tape, you get a sofa or chair on which you can sit down and relax.

On the eve of the New Year, an artificial Christmas tree will come in handy.

Such unusual twigs are suitable as decor. At first glance, it is difficult to determine what exactly they are made of.

Chess lovers can make such figures for the game.

And this is not all the fakes that you can make with your own hands. It is not difficult to come up with the design of a summer cottage, a playground, a kindergarten and just a living space, you just have to connect your imagination.

On a note! For the manufacture of crafts, containers of various shapes and sizes are used: from eggplants to Imunele bottles.

Master class on creating daisies from bottles - step by step

Artificial daisies will be a great addition to fresh flowers in the backyard. If they are made large and expressive, they will attract attention. Daisies are placed in a flower bed, house or fence. There are several options for making such flowers.

Below is a description step by step for beginners with a photo:

Chamomile is ready. To make the stem, the wire is fixed under the petals.

Chamomile can be made in another way. Below is a master class:

The necks and bottoms of two plastic containers are cut off, and then the petals are cut out of them.
A disposable yellow plate is taken, several holes are made in it in a circle. Then petals are inserted into them, part of which (inside the plate) is burned with fire. This will allow them to be firmly held and not crumble.
Holes are made in the center of the plate where the wire is inserted. This is a stem, it is fixed from below.

Such a flower will become a pleasant decoration of a summer house, garden or vegetable garden.

Video: how to make a plastic camomile with your own hands

Garden bottle crafts for beginners

From this material, you can make a whole decorative pond, equipping it with everything you need.

The simplest solution that gardeners have been using for many years is a spray watering can. She is primitive in her performance. All that is required is to make a few holes in the lid.

From eggplants and other plastic containers, you can equip a whole children's corner, which will be unique and inimitable.

Garden crafts are distinguished by their diversity. Everyone can choose the one that will suit their taste. Moreover, they are made very simply.

Video: how to make plastic fly agarics with your own hands

Photo of crafts in the garden 2016: sun, pig, bee

Cute piglets are used not only as a decoration, but also with benefit. For example, like a flower bed. Such a pig is designed simply. You will need an eggplant, a few cut bottlenecks at the expansion points (for the legs), a wire for the tail, two blanks for the ears, pink paint and a brush. Slots are made for the ears and legs in the eggplant. Eyes can be made from beads or drawn.

The cheerful sun will cheer you up even on a cloudy day. To make it, you will need a tire, several small bottles, and paint. The tire digs a little into the ground, then “rays” are glued to it. You can close the tire clearance with a plastic blank. Everything is opened with yellow paint, when it dries, the muzzle of the sun is formed.

A plastic bee is made quickly and easily. An ordinary bottle is taken in which two slots are made. Then, wings are cut out of a similar material and threaded into these slots. To decorate the bee, you will need yellow and black paint.

There are many options for crafts for the garden (pigs, peacocks, daisies from plastic bottles) - the choice is up to the owner.

Now we will tell you how to make a wonderful chamomile from plastic bottles with your own hands, exclusive with a minimum of costs.

For this job you will need:
1) Empty plastic bottles in three colors: white, yellow and green;
2) Candle and matches or lighter;
3) Thin marker or felt-tip pen;
4) Good sharp scissors;
5) Awl;
6) A piece of thick wire, about 25-30 centimeters long;
7) A sheet of white paper;
8) Ruler;
9) Compass;
10) Superglue (or any other);
11) Round nose pliers;
12) Scotch.

So, you can start.

First you need to cut off an even part from a white bottle and divide it in half. Use a compass to estimate the size of the circles that will fit on this piece of plastic, you need two of them, transfer this size to paper and draw a template.

Cut this circle out of paper and attach it to the plastic, circle it with a marker and cut it out.

Without cutting to the middle of the workpiece, make frequent proportional cuts and additionally round each petal.

If you're not sure what you'll get by eye, make a markup with a ruler, divide the circle into 16 parts, then round each of them to make petals.

Put the flowers aside, time to work on the leaves.

Randomly draw a proportional leaflet on paper, cut it out. On a piece of a green bottle, attach your template, circle and cut out two leaves and an arbitrary star for a cup.

Now you need to cut a green thin strip of about 5 millimeters for the stem, half a meter will be enough.

From a yellow bottle, cut a small circle for the core, make small frequent cuts along the edges. From the bottom you need to cut off one convex edge so that it can cover the core almost completely.

Now all our blanks are ready, it's time to give them a rounded shape so that the flower looks like a real chamomile. To do this, it is necessary to warm up over the fire and slightly bend the white blanks, the core, the leaves and the cup. Light a candle. Gently bring the blanks to the fire to melt them slightly.

You need to make a stem. Take a thin green strip and wire, bringing it to the fire, gradually wrap plastic around it, leaving about a centimeter of wire free. Warm up the edges more so that the fixation is maximum.

It remains to fix everything. Put a cup, petals and core on the left tip of the stem, bend the wire with round-nose pliers,

now glue the convex yellow piece. Arrange the leaves on the stem, you can attach it with adhesive tape or glue.

Your work of art is ready, everyone will be delighted with such a gift. Everything is simple, easy and elegant!

The final look of the craft.

In addition to various flowers, our site also presents crafts for children, for example, a plane from a bottle, which a child can also make.

The process of making chamomile from plastic bottles is very simple. To work, you will need a minimum of materials and tools and very little time. From a bottle, you can make flowers of various shapes and sizes: small or large, lush, with sharp or rounded petals. You can even use plastic spoons to make them. Such a product will not wither, unlike real chamomile, and will delight with its appearance all year round.

Show all

Chamomile with large petals

The easiest option, suitable for beginners. For work you will need:

liter plastic bottles of white color from milk or kefir;
covers from them (orange or yellow);
wire for needlework with a diameter of 4 mm;
awl;
green teip tape (for the stem);
pencil;
sharpened scissors.

Step-by-step instruction:

1 The bottle is pierced with an awl at the point where it begins to expand. Poke scissors into the hole, cut off the upper part. The cut line should be straight and parallel to the bottom.
2 They do the same with other bottles, but they also cut off the neck (the part on which the cap is twisted).

3. Each blank is marked out: draw lines parallel to each other with a pencil from the neck to the bottom. These are future petals. They can be made wide or narrow, like a real chamomile.

4. Scissors cut the plastic along the marked lines. The cuts should end at a small (a few cm) distance from the top of the workpiece, otherwise the whole structure will fall apart.

5. Give the petals the desired shape at the ends - round off the wide ones, make the narrow ones sharp.

6. The first blank (with a neck) is placed on the table, the rest are put on it.

7. Begin to unbend the petals so that the flower opens.

8. Screw the lid on the neck. It will simultaneously serve as the center of the chamomile and hold the entire structure.

9. The lid is pierced with an awl in two places. Holes are needed to push the wire through them.

10. A piece 2 times longer than the future stem is cut from a coil of wire. Fold in half. Both ends are inserted into the holes on the lid.

11. Pull out both pieces of wire from the bottom of the cover. Connect both parts by twisting them together.

12. The resulting trunk is wrapped with teip tape.

The product is ready. Having collected several of these flowers, you can stick them into the ground in a flower bed.

If you take, instead of a liter bottle, small ones, with a volume of 100 ml, then with the help of this master class you can make elegant small daisies.

flat daisy

The process of making such a flower with your own hands is a little more complicated, but the resulting chamomile with sepals and leaves can decorate not only the garden, but also the house.

Result

For work you need to prepare:

plastic bottles of green, white and yellow colors;
glue gun;
wire 0.2 and 4 mm;
a candle with matches or a lighter;
pencil;
awl;
scissors;
scotch;
ruler;
paper;
pliers;
compass.

The process consists of 4 steps: first the petals are made, then the stem and leaves, then the core, and at the end all the details are assembled into a single structure.

petals

They are made from a white bottle.

Making petals

The bottom and neck are cut off from it. Draw a line along the ruler with a marker from one cut point to another. On the opposite side draw another one of the same. Cut with scissors. You should get 2 equal halves.

A flower template is drawn on the sheet: a circle is drawn with a compass. The size of the flower depends on the diameter of this circle. Cut out a blank from paper and apply it to half a plastic bottle. Draw around with a pencil. Cut out the circle.

Now we need to make the petals. To make them the same and even, it is better to first mark the workpiece with a pencil - draw lines from the edge to the middle, not reaching the center a few centimeters.

petal formation

Cut with scissors and round off the ends of the petals.

Flower blank

The tips are brought to the fire with candles or lighters so that they melt a little and bend.

Changing the shape of the petals

In the same way, make the second blank.

Stem and leaves

Draw a leaf and a sepal on paper, cut them out.

A green plastic bottle is cut in half. One part is divided in the same way as the white part. A leaf and sepal template is applied to the resulting plastic sheet, cut out.

The other part of the bottle is cut in a spiral to get a thin ribbon.

leaflets

Stalk wrapping tape

A piece is cut from a coil of wire to make a stem. Attach the leaves with a thin wire (0.2 mm in diameter) to the stem. Wrap it with plastic tape. The ends are fixed by holding them over the fire.

Core

To make the center of the flower, take a yellow bottle. The bottom is cut off from it.

At the bottom there is usually a bulge in the center, this is the part that is needed. Carefully cut it out in a circle.

Assembly

The parts are connected with a glue gun. First, 2 blanks with petals are glued together, a yellow center is fixed in the center of the top.

flower assembly

When the glue hardens, the sepals are attached from below. This design is connected to the stem. The flower is ready.

small daisies

For work you will need:

plastic white bottles;
straws for green drinks;
glue gun;
several yellow lids from small plastic containers;
pencil;
scissors.

Work materials

Procedure:

1 At the bottom of the bottle, at a distance of a few cm from the bottom, draw a line in a circle.
2 Scissors cut the container along the drawn line. For flowers, only the part with the bottom is required.
3 Petals are drawn on the workpiece with a pencil - from the cut point to the center. Cut out with scissors.

4. Use a gun to glue yellow covers in the center of the bottom. The workpiece must be held at the same time so that the petals are directed downwards.

5. Turning the flower over, glue the stem (green tube) to the center of the workpiece with a gun.

6. Several tubes are cut lengthwise, straightened and cut out from them leaves. Glue to the stem with a gun.

From one plastic bottle, you can make blanks for two different daisies - use the bottom for the last master class, and make a flower with large petals from the part with the neck.

Daisies are one of my favorite flowers, I like them for their simplicity and at the same time they attract a lot of attention. The middle of a chamomile is like a small sun that radiates beauty around itself. When I make flowers from any materials, I don’t know why, but I want to make a camomile first. Chamomile is a very delicate and beautiful wild flower, which is loved by many craftsmen. Only at first glance, chamomile seems simple, but like any other flower, it requires a lot of attention. In order for the chamomile to turn out like a living one, you must definitely make an effort and try.
Dear friends, today I want to share with you a small master class on making chamomile from plastic bottles, I hope everything will be clear to you.

What you need to make daisies from plastic bottles:

* Plastic bottles (Transparent and green.)
* Eyes for toys, you can buy in the sewing department.
* Semolina.
* Any white paint.
* Marker.
* PVA glue.
* Scissors.
* Thermal gun.
* Acrylic art yellow paint.

How to make chamomile:

We take a plastic bottle, cut off the neck and bottom from it, and we will use the middle. See that the plastic bottle is even without any bulges on it. Draw daisies on it with a marker. If you don’t know how to draw daisies, find some kind of stencil on the Internet, print it out and circle it on the bottle. A little lower I will attach a few stencils for those who cannot find anything. This is how you should be able to.

It took me two flower blanks to make one chamomile. Now we cut out our blanks. Here's what I got.

Now we need to make a string from a plastic bottle to make a stem. Let's take a green bottle and make a string for the stem out of it. It is best to cut the bottle in a circle so that we have a long rope. Look at what I got a rope from a plastic bottle ...

Now we will make a stem from this rope. Let's take a copper wire and start winding our rope on it, while I slightly heated it over the candle and quickly wound it onto the wire. Look, do not burn yourself, you do not need to heat the rope much.

Now the most interesting thing, we will make blanks for the middle of our flower, for this we will use ordinary purchased eyes for making toys. The eyes need to be selected in size so that they are not too big or too small. Instead of eyes, you can use buttons or any other suitable material.

We coat them with PVA glue and immediately dip them in semolina until the glue is dry. The croup should lie evenly over all the eyes, make sure that there are no gaps.

Now you need to wait for the eyes to dry and then start painting them. I painted with yellow acrylic art paint, you can use the paint of your choice.

Now we take blanks of daisies and paint them with white flowers, I had white spray paint from a spray can, you can also paint with the paint you have. I painted the blanks twice so that there were no gaps. It is best, of course, to choose a white plastic bottle, then you will not need to paint it.

When the paint dries, we begin to make our daisies. Glue the finished center of our flower to the middle of the flower with a thermal gun. Then we connect the barrel and the chamomile itself with each other, also with a thermal gun. Chamomile is almost ready, she still needs to make leaves.

From a green bottle, we cut out the leaves so that they look like real leaves like chamomile. Lightly melt them over the candle, be very careful.

We take a thermal gun and glue their stalk. Chamomile from plastic bottles is ready.

Despite the poor image quality, I hope my master class on making daisies will come in handy for you, I will also be glad for your feedback. THANK YOU.

And here are the promised patterns for chamomile.

Chamomile from a plastic bottle already used in the house is a budget beauty! Needlewomen make countless flowers from plastic bottles. One of the beautiful and realistic flowers is chamomile. Large daisies from bottles are made to decorate flower beds, front gardens, summer cottages. And small ones can decorate the interior of an apartment or house, and you can also make a composition for a gift.

Below are step-by-step instructions for making both small and large daisies.

We make small daisies from a plastic bottle with sharp petals

These little beauties of chamomile look great in a bouquet on the windowsill in the apartment. You can also make a gift with these daisies or give them yourself.

To make these daisies you will need:

Small white bottles (for example, from Aktimel drink)
yellow lid
Wire

For one chamomile, three bottles are needed. The neck is cut off from the bottle, leaving a bend, future petals will curve beautifully from it. Next, the bottles are cut into strips along the entire length, not reaching the bottom of 1 cm. Each strip must be sharpened with scissors and bent to the sides. Then in the bottom you need to make slots or holes. Through the slot, put all the blanks of the petals on the wire, the end of which must be clamped with a loop. The first blank, go through with glue from below, no matter what the future chamomile falls. Pour glue into the middle of the blanks and put on the lid. Spread the petals. Chamomile, made by yourself from a plastic bottle, is ready.

Let's try to make a variant of delicate daisies with rounded petals

Such flowers can decorate both the interior of the apartment and the area in front of the yard. Densely planted daisies in front of the house resemble a chamomile field.

For crafts you will need:

Clean plastic bottles (white, green, yellow)
Candle (lighter)
Scotch
Marker
White paper
Wire
Scissors, awl, compasses, ruler, pliers

Petals.

Cut off the neck and bottom of the white bottle. Cut the bottle in half and lengthwise to make pieces of plastic. On a piece of white paper, use a compass to draw a round template, the size is selected for the pieces of plastic. Transfer the template to plastic and cut it out. Draw strips on plastic circles and cut, not reaching the middle of 0.5-1 cm. Round off the edges and bend a little over the fire.

Leaves, sepals and stem.

Draw a leaf and a sepal on white paper, cut it out and transfer it to a green bottle. Cut the leaves and sepals. Cut the rest of the bottle in a circle into a thin long strip. Wrap the strip on the wire and burn a little over the fire.

Core.

Cut out one convex part from the bottom of the yellow bottle and bend it slightly over the fire

All blanks are ready. The flower is easy to assemble: a sepal is put on the wire, then white petals, round the end of the wire with pliers and glue the yellow center on top. Glue the leaves to the stem as well. Ready!

Flowers come out medium in size, look beautiful in front gardens or in flower beds.

Materials:

Three plastic white bottles
yellow cap
Wire

Technique.

Cut the bottles in half, at the point of expansion. Cut off the necks of two bottles. Cut all blanks into petals and round the edges. Insert two bottles in turn into a bottle with a neck, pierce with an awl and insert a wire, fix with glue. Screw the cap on the bottle with the neck. Straighten everything. Chamomile made from plastic bottles!

Such daisies are very large. They decorate household plots, flower beds, front gardens. You can see these flowers from afar.

Materials and tools:

Large white plastic bottles
plastic plate
strong wire
Candle or lighter
Scissors, knife, awl

Step-by-step instruction.

Cut off the necks and bottoms of the bottles. Cut lengthwise and cut petals from these blanks, give shape, slightly bending them over the fire. It is better to take a plastic plate yellow, if there is none, then it must first be painted. Make holes on the edges of the plate with a knife and insert the prepared petals into them. From the inside of the plate, gently burn the inserted edge of the petal with fire. This will not make them fall out. Make a hole in the middle of the plate and thread the wire through it, imitating the stem of a flower. Chamomile is ready!

From the same materials, everyone will get their own beautiful chamomile, with its own special zest, which will definitely fit either into the interior of the apartment or into the design of the backyard. And a creation made with your own hands will always please the eye.

Each craftsman has his own tricks for making daisies from plastic bottles, and some are willing to share them. A few little tricks can be learned from the video master classes: