How to wrap a gift in gift paper: original ideas. How to wrap a box with gift paper: the best packaging options

Love to give gifts? Then you have to pack them often. Of course, it's easier to buy a holiday package for the box and put it with the rest of the gifts. But most of all, gifts with original packaging that you can make yourself will be remembered.

How to gift wrap a standard size box

To pack a gift of a regular size, you do not need special skills. If you strictly follow the step-by-step instructions, you will wrap it quickly.

Prepare the following materials and tools:

wrapping paper;
Double-sided tape;
scissors.

Package:

Calculate the size of paper you need to use for packaging. This can be done using this formula. The width of a sheet of paper will be equal to the sum of the length and height of the box, which you multiply by 1.5. To determine the length, measure twice the width and height of the box, add them together, then add 4 cm to the total.

Arrange the gift on the back of the paper according to the size. Glue a strip of adhesive tape on top of the cardboard along the entire length. Remove the protective layer from it.

Fold the short edge of the paper onto the cardboard. Press the tape in place so that the package fits snugly against the cardboard. Press the fold lines with your fingers.

Fold up the opposite edge of the paper by 2 cm. Glue the tape along the fold line, remove the tape.

Pull the package tightly around the present, fold the paper over the lid of the box and glue its edge, as shown in the photo.

Now wrap the sides of the package. To do this, first fold the paper from above, iron all the folds formed. Stick tape on top.

Alternately fix the corners of the paper on the cardboard.

On the sides of the triangle that turned out, apply double-sided tape.

Then press the triangle firmly against the box. Repeat all steps with the other side.

Decorate the top with a bow and packing tape.

How to wrap a round box in gift paper

Round-shaped gifts are quite problematic to pack, but possible. With the next method of decorating the box, you use a minimum of paper and decor.

For round packaging you will need:

patterned paper;
hole punch, scissors, stapler;
glue gun;
cardboard circle;
ribbon or twine.

Package:

Measure the box height and diameter. In size, cut out a rectangle whose height will correspond to the height of the gift, multiplied by 1.5; and the length of the figure is the diameter. Cut the paper into strips no more than 3 cm wide.

From one narrow edge of the strip, make one hole with a hole punch. Glue the other side of them onto the cardboard in a circle. You have a round fan of stripes. Wait for the glue to dry.

Place the gift in the center of the figure. Cut the ribbon and thread it through the holes in the strips. To do this, gradually bend the strips to the middle of the circle, tightly tightening the tape.

When you put the last strip through, tie a knot in the ribbon. So you collect all the blanks together, and they will not fall apart. Cut off the excess tape. Hide the knot with a bow, which is made from the remnants of the ribbon.

How to wrap a long box in gift paper

Narrow and long gifts can be wrapped like standard ones, but it is much more interesting to wrap them in the form of a large candy.

Packing materials:

corrugated paper;
scissors, transparent tape;
decorative tape.

Cut the colored paper into a long rectangle where its length is twice the length of the box. The height of the figure will be twice the sum of the width and height of the gift. Add 3 cm to it for allowances.

Place the gift in the center of the parchment and wrap it around. Fix the paper cut on the cardboard with transparent tape.
Pull the paper together with a piece of decorative tape on each side. If desired, make curls with the sharp edge of the scissors.

Cut off the excess parchment along the edges of the package.

Decorate the top of the gift with any decor.

How to gift wrap a custom size box

Sometimes presents have a non-standard shape. Their packaging is not as complicated as it seems at first glance. Take:

two types of wrapping paper;
scissors;
glue gun;
Double-sided tape;
decor.

Package:

Wrap a non-standard gift in thin parchment. You can do without this action, but this way you will smooth out the corners of the box. Cut off a small piece of wrapping paper depending on the size of the box. Place the box on one end. Tape on this side.

Wrap the box around with paper. On one side, press the edges of the package and lightly iron the folds. Wrap the edge several times towards the center and fix with glue.

Press down firmly on the packaging so that the adhesive is completely cured.

Fold the other side of the package in the same way, but at a right angle to the other edge of the package. So you get a three-dimensional triangle.

Decorate the packaging with any decor.

Giving gifts is an art. It is easy to learn if you follow such simple master classes. Now your presentations will always be original and will be remembered among many others.

See the video for three more ways to pack the box:

Creating and decorating gift wrapping is an art. After all, it is on the "clothes" that the present will be met. As they say, you can't make a first impression twice. If you have prepared a wonderful souvenir and think that the preparation for the festive event is over, then you are mistaken. Be sure to ask how to pack the box in gift paper. After all, unformed cardboard gives the impression of haste, slovenliness, boredom, and, in the end, lack of taste. No one wants to leave that opinion of themselves, so even if you're really pressed for time, just opt for lightweight packaging options. Simplicity can be beautiful too.

Materials and tools

Before learning how to wrap a box in gift paper, decide on a set of necessary tools. You will need the following:

wrapping paper (thin, thick, corrugated, crepe, embossed, mother-of-pearl, decorative);
ruler or meter;
scissors;
double sided tape;
decorative elements (ribbons, bows, flowers, beads, thematic, for example, New Year's decorations).

In fact, nothing special is needed. It is important to choose the right combination of paper and decor. Do not overdo it. Everything should look harmonious and neat.

Material calculation

The range in which you can wrap gifts is now huge. Some options are cheap, others are much more expensive. In order not to overpay or, conversely, not to end up in a situation where the purchased material was not enough, it is important to understand how to determine the right amount of paper to pack the box. This is done with the help of simple measurements and simple mathematical calculations.

If you have a round or oval box, proceed as follows:

attach a tailor's meter or a regular thread (ribbon) to the side of the box and measure its length (in fact, a circle or an oval);
measure the height of the box and lid;
determine the diameter of the base (cover);
proceed to the calculations: you will need a strip as long as the circumference of the lid and as high as the box, taking into account allowances (no more than 2 cm on each side, depending on the size of the box) and two squares with a side equal to the diameter of the circle of the lid, also taking into account allowances;
add up the measurements.

If you have a square or rectangular box, proceed as follows:

measure the width of the box and the dimensions of the side parts;
determine the length of the entire surface, that is, sum the dimensions of all the faces along which you will wrap the box with paper;
do the calculations: add twice the height of the side faces to the width of the box - this will be the width of the required sheet; add the gluing allowances to the size determined in step No. 2 - the length of the sheet was also calculated.

As you can see, the calculations are simple. If this math is still not very clear to you, just take newsprint, wrap the box, and unfold it, measure the material used.

How to pack a box in paper

How to properly wrap a box in a decorative sheet? Let's study. Speed will come with experience. To begin with, it is worth practicing on unnecessary paper so that the final packaging comes out neat. In addition to the process of wrapping the box, which will be described below in the relevant sections, it is also important to decorate the packed box in an original way. The following apply:

satin or paper ribbons of one or more shades;
bows and small bows;
fabric and paper flowers;
lace;
beads;
buttons;
themed decor (Christmas or children's toys, hearts, stars, snowflakes).

Naturally, decorations and the general style of decoration should correspond to the occasion on which the present is presented, and the preferences of the person to whom you give. If in doubt, it is better to stay on a discreet classic without pretentiousness and extravagance. By the way, if possible, it is worth making the wrapper so that it can be easily removed without tearing.

Square box packing

If you have figured out the calculations of the amount of paper and practiced on a newspaper, then it will not be difficult to figure out how to pack a box in gift paper. Basically, first you wrap the box around the entire center of the surface so that both sides have the same amount of paper, and then gently fold the side elements. First work with the top edge, then with the side ones. Lastly, fold the bottom with a double fold. Everything is very simple.

How to wrap a round shape

To wrap the box in gift paper, you will need to cut out a few individual parts from the sheet and then glue them together. So, work as follows.

Cut a strip for the side surface, taking into account the gluing allowance and folds at the top and bottom (calculation of dimensions was given above).
Cut out two circles for the bottom and lid (bottom with allowance, lid without).
Make a strip along the height of the lid with a fold allowance.
Glue the circle to the bottom of the box, securing the folded allowances to the side surface.
Glue the side strip by folding the top seam allowance inside the open box.
Secure the lid circle to the surface by folding the allowances down to the side.
Glue the side strip, also hiding the excess inside the lid.
Decorate the box.

How to quickly wrap a gift in paper with your own hands

If there is no time for measurements, cutting and gluing at all, use the simplest option - wrap the souvenir neatly in paper with a beautiful texture or even just in corrugated or crepe in a spectacular shade or, for example, with sparkles. It is better to buy paper with a margin, and tie loose "tails" with a beautiful ribbon and decorate with a bow. If the "leftover" is too large, trim it to shape after packing.

So, you have learned how to wrap a box in gift paper. If there is absolutely no time for this, it is better to wrap the thing beautifully in paper even without a box, but with decorations and a spectacular texture. The original wrapper will always make a better impression than a banal white or brown cardboard box. Try to get creative with gift wrapping!

DIY gift wrapping: how to wrap a gift in paper

Gift wrapping has become a major challenge for many people year after year, and the main problem most of us face is how to wrap the box neatly and the first time without wasting the entire roll of paper and duct tape. I hope this step-by-step instruction will help you avoid standard mistakes:

1. Wrap the box with paper and mark the cut with a margin of 3-4 cm.

2. Fold the paper in the indicated place - this will allow you to cut exactly the sheet you need for packaging.

3. Cut a sheet of paper along the fold. You can press it down with a box if the paper curls.

4. Bend one long edge 1.5-2 cm.

5. Fix the other end with a small piece of adhesive tape 1-2 cm from the center of the box. Fix the folded edge on top also with one small piece, and preferably with double-sided tape. The joint should run in the center of the box. In the future, you can close it with a beautiful ribbon.

6. Fold the edges of the paper on the other side of the box to form a triangle.

7. Bend the bottom edge 1 cm.

8. Press the top edge firmly against the box and secure with a piece of tape.

9. Now press the bottom edge against the box and fix it carefully (it is also better to use double-sided tape here).

10. We do the same with the opposite side (this time it is better to put the box upright).

If your gift was sold without packaging, you can make a gift box with your own hands.

simple square gift box

Consider what size box you will need to pack your gift and make a blank from cardboard or thick paper according to the diagram.

It remains only to bend and glue the edges of the box.

Rectangular box with lid

For a rectangular box with a lid, you will need a large blank postcard or two sheets of cardboard or thick paper of the same size.

Draw each sheet as shown in the photo.

A ruler and any pointed object will help to evenly bend the cardboard along the lines.

Make cuts as shown in the photo.

Fold the walls of the future box.

Apply glue and fix the walls with paper clips until the glue dries completely.

Do the same with the second sheet.

Gift box with lid is ready!

Helpful Hints

When a holiday and we begin to select the right gift, we want everything to be perfect.

You may doubt the gift or be absolutely sure that this is exactly what you need, but beautiful packaging is not enough to complete the picture.

It is not necessary to order or buy special gift packaging - you can decorate the gift yourself.

On our website you will also find:

How to make a box
DIY Christmas packaging
DIY gift wrapping
15 smart and original packages
How to make Christmas gift wrapping

Beautifully wrapping a gift (be it a New Year's or a birthday) is not difficult, you just need to know a few secrets.

It is worth noting that there are many ways to decorate a gift, and you can find out about the most interesting, original, simple and not so here.

How to wrap a gift in paper. The easy way.

How to make a gift with your own hands

You will need:

Wrapping paper

decorative ribbons

Scissors

Tape measure

Double sided tape

First you need to determine the right amount of wrapping paper. To do this, cut out a rectangle.

* To find out the required width of the rectangle, measure the perimeter of the box with a tape measure. After that, you need to add 2-3 cm to the hem.

* To find out the length, you just need to know that it is twice the height of the box.

Helpful advice: in case you are doing gift wrapping for the first time, test it out on a regular newspaper. This way you can determine the correct dimensions.

1. You cut out a rectangle of the desired size from wrapping paper. Place the gift box in the center of the paper.

2. Now you need to bend the left or right vertical edge by about 0.5-1 cm and stick double-sided tape to the fold.

3. The gift box must be wrapped tightly. Remove the film from the tape and stick the folded edge of the wrapping paper.

4. The top of the wrapping paper needs to be folded as shown in the picture. It must be pressed tightly against the end of the box.

5. The side parts must also be bent and pressed firmly.

6. To secure the lower part neatly, you need to bend it and press it against the end of the box. After that, you need to bend this part and bend it again, but now in the middle.

7. Glue tape to this part and attach to the end of the box.

8. Repeat the same process on the other side.

How to decorate a gift Option 1.

First you need to cut a paper strip of a different shade. Wrap this strip around the box and tape the ends together. You can add a decorative cord.

How to decorate a gift with your own hands. Option 2.

This option can be used if you have a bilateral wrapping paper. Leave more paper wide and use this part for decoration.

How to decorate a gift box. Option 3.

Try using several satin ribbons in different colors.

How beautiful to decorate a gift. Option 4.

A lace ribbon can also help decorate a gift. Wrap it around the gift wrap and secure the ends with double-sided tape.

How to wrap a gift beautifully

You will need:

Roll of wrapping paper

Double sided tape

Scissors

bright ribbon

1. Prepare a roll of gift paper, unfold it on a flat surface (table) with the pattern down (wrong side up).

2. Take the gift box and turn it upside down. Next, place the box on gift paper.

3. Cut the paper, leaving a margin of about 2-3 cm.

4. Stand on the side where you have the roll. On the opposite side, stretch the paper and fasten it with double-sided tape.

5. Unwind the wrapping paper roll and cover the entire box with paper. You also need to cover the part of the box that is slightly covered on the opposite side. The paper should protrude from the edge of the box by about 2-3 cm.

6. Bend the stock of 2-3 cm inward and fix it on the box along the fold using double-sided tape.

7. Side protruding ends of the paper must be folded inward. You need to make four flaps that bend at a 45 degree angle. Next, fold the paper along the flaps.

8. The top sash must be carefully bent to obtain even corners. To achieve this, you need to bend along the top edge of the gift. Next, the sash needs to be bent again to get a line along which you can cut off the excess with scissors. After you cut off the excess paper, glue it to the box.

9. Do the same with the bottom sash.

10. Repeat steps 7, 8 and 9 for the other side of the box.

11. Prepare a bright ribbon, which should be about five times the length of the box. Put the wrapped gift upside down on the ribbon, stretch it and wrap the gift as shown in the picture.

12. Turn over the box. The ribbon must be tied into a double knot, and make a bow.

13. You can cut a triangle at the ends of the tape.

How to pack a gift with your own hands. wedding option.

You will need:

Light colored wrapping paper

Satin ribbons

beads

Lace

Double sided tape

Scissors

stapler.

1. First you need to measure the right amount of wrapping paper - just take the necessary measurements. It is worth noting that in this case, the width of the paper must be calculated so that the gap between A and B is about 1-1.5 cm, taking into account that edge A is bent by 0.5 cm.

2. Apply a strip of tape to edge B of the wrapping paper. This must be done from the front side and at a distance of about 1-1.5 cm from the edge.

3. Prepare a lace ribbon - its length should be 2 times the length of the wrapping paper.

4. Remove the protective film from the double-sided tape and glue the lace to the paper.

The easiest way to wrap a gift is to wrap the finished box in wrapping paper. After all, very often the things that we buy as a gift are already in a cardboard box. In this master class - how to pack a box in gift paper. In fact, there is nothing difficult in this, you just need to know how to correctly calculate the dimensions of the wrapping paper and how to properly wrap the box in paper.

What you need to pack the box
- wrapping paper;
- decorative ribbons, cords;
- scissors;
- tape measure;
- double-sided tape (try to get double-sided tape, as pieces of ordinary tape are very noticeable and will need to be carefully masked).

How to determine the right amount of packaging paper
In order to pack a rectangular or square box, we need to cut out a rectangle from the wrapping paper, respectively. To determine the width of the rectangle, take a measuring tape and measure all four sides of the box around the perimeter (full turn), and add 2-3 cm for the hem. And the length of the rectangle is one box length + two box heights.

A little advice
If you are packing for the first time, do it first on regular newspaper. See if you have determined the dimensions correctly, where the tape should be located, how the folds look, etc.

How to pack a box Basic steps.

Step one. Place the gift box in the center of the paper rectangle. Bend the left or right vertical edge by 0.5-1 cm, glue a strip of double-sided tape to the fold.

Step two. Wrap the box tightly with paper as shown in the photo. Then remove the protective layer from the adhesive tape and glue the folded edge of the paper.

Step three. Check that the protruding edges of the paper from the ends of the box are the same. Then bend the top of the paper as shown in the photo, press it firmly against the end of the box.

Step four. Fold and press the sides of the paper firmly.

Step five. Bend the lower part first and press firmly against the end of the box. Then bend it back and bend it approximately in the middle. Stick a strip of tape on it and glue this part to the end. Do the same on the other side of the box.

How to decorate a paper-wrapped box

1st option. Cut out a small strip of paper in a different color, wrap the box around it, and tape the ends together. Tie with a decorative cord.

2nd option. If the wrapping paper is double-sided, then you can leave a larger width allowance and use this for decoration.

3rd option. You can use several ribbons of different colors and textures.

4th option. You can use openwork lace, the ends of which are also connected with double-sided tape.

In general, there are a huge number of decorating options, we have given you just a few to stir up your imagination a little.

You can wrap the purchased gift in a special department of the store, where you can be offered different types of wrapping paper and several types of bows. But if you want to make your gift original and unusual, then it is best suited DIY gift wrapping.
Before thinking how beautiful and original to pack a gift with your own hands and proceed with the choice of packaging material, it should be noted that different people have different attitudes to gift wrapping:

- DIY gift wrapping for a man should be restrained and concise, you do not need to use all kinds of bows and jewelry in it - men simply will not pay special attention to this and will not appreciate your efforts. Wrapping paper, choose a solid color or with a clear geometric pattern. If there is a choice, then you can choose paper that matches the hobby or profession of a man (with musical attributes, for example);

- corporate packaging gifts should also not be distinguished by flashy colors; it is best to use paper bags or handbags with the company logo. In this case, it is better to make a wholesale order, you are unlikely to master it manually;

- in a gift box with your own hands for woman you can fully show your imagination and use all possible materials - beads, sequins, ribbons, rhinestones, feathers, etc. Although, women are also different, so be guided by personal preferences;

- children's gift to, naturally, and should look childish - use bright rainbow colors, balloons, sweets, funny applications, stickers of your favorite cartoon characters, small toys, etc.

- do-it-yourself gift wrapping must take into account theme of the celebration and use different attributes and characteristic colors. For example, gifts for the new year can be decorated with Christmas tree branches and bells, and gifts for the bride should be combined with her wedding dress.

Depending on the form of the gift itself, handmade gift wrapping, is divided into two groups - hard gift wrapping (when the gift is in a hard cardboard box) and soft gift wrapping (when the irregularly shaped gift itself is packed in soft packaging material).

Solid Packing Methods.

1) Wrap the finished box in paper. Often, purchased gifts are in a ready-made factory cardboard box. In this case, your efforts are minimal - you just need to pack the finished box in wrapping paper with your own hands and decorate with various accessories.

2) Wrap the cardboard box with packing material. If you purchased a gift without a box, then you can get out of the situation by pasting the finished box (for example, from shoes) with packing material or cloth with your own hands, and put the gift in a beautiful box, which you then tie with a ribbon. For breaking things, you can put a special filler in the box - tissue paper, light fabric such as chiffon, decorative feathers, dry flower petals, and the like.

3) Make a gift box with your own hands. If the gift is small in size or irregular in shape, then you can make a do-it-yourself box for it from colored cardboard or scrapbooking paper, which can now be purchased quite easily. There are a lot of ways here - these are all kinds of boxes, chests, packages and envelopes, as well as boxes made in the origami style.

Soft packaging methods.

1) Wrap the gift itself in soft, easily draped wrapping material. It can be special crumpled paper or tissue paper (“cigarette”), which is sold in large stationery stores. Corrugated wrapping paper, polysilk, soft felt paper are also suitable. In this case, the gift is wrapped in the form of a candy, tied on both sides with ribbons or decorative cords. Or you can choose the shape of a truffle, when only one end is tied with a ribbon, and the other becomes a stable base.

2) You can use the Japanese technique of wrapping gifts in cloth - furoshiki, which has a number of advantages over paper packaging. Firstly, such packaging is considered the most environmentally friendly - the fabric can be reused and not thrown away like paper after unpacking the gift. And secondly, thanks to a wider choice of colors and coloring of fabrics, it is possible to achieve greater expressiveness and individuality in gift wrapping.

3) From fabric, felt paper or even thick paper, you can sew a bag with your own hands and put a gift in it, and then decorate with ribbons and accessories.

How to decorate a wrapped gift.

This is truly a creative process that expresses your personality, so you can use whatever you want. To decorate a gift wrapped in paper (or other material), paper and satin ribbons, lace, decorative cords and ropes are used. You can also use foil, tinsel, sequins, beads, beads, chains, stickers, various tags and labels, feathers, dried flowers and leaves, shells, small stones, buttons, coins, etc.

And now how to tie a ribbon beautifully.

So, we have a box of a correctly rectangular shape, wrapped in wrapping paper. It is required to tie a ribbon or any other decorative braid, lace, tourniquet, etc. beautifully and neatly on it.

METHOD #1

1. Tie the gift box in a criss-cross pattern and secure with a knot in the center. For a more convenient description, we denote the ends of the tape by the letters A and B.

2. Take tape A and make first one and then the second loop for the bow so that they look like a figure eight (see photo). Use your fingers to press the center of the figure eight to the center knot of the ribbon. Part B is on the sidelines for now.

3. Holding the figure-eight bow with one hand, take tape B with the other hand and cover the middle of the figure-eight with it, wrap it around the central knot and make another loop, only from tape B. Straighten all the loops and make them the same. Trim the ends at an angle.

METHOD #2

1. Separately fold the bow, following the instructions in the photo.

2. Tie the box with a different kind of ribbon. It is best to use contrasting, but matching ribbon colors. And the tapes themselves are of different widths.

3. Attach a ready-made bow to the center and tie the ribbons so that the resulting bows are perpendicular to each other.