Fruit trees from beads. Beaded trees weaving technique for beginners (photo). From red beads you need to make

Beads, multi-colored small balls, can serve as the basis for a variety of artistic products. So, it is quite possible to make trees from beads so believable that it is difficult to distinguish them from real branches with leaves and bright fruits.

Features of making trees from beads

When creating beaded trees, you will have to master several beading techniques, different to imitate different types of trees.

The craftsman creates each branch and each leaf by hand, stringing beads on thin wires.

The work requires increased attention and adherence to a certain sequence of actions.

Our selection of video tutorials tells how to make beaded crafts for beginners with your own hands. It is enough just to carefully follow the actions of the teacher and copy his main movements. The master will tell in detail about the technique of weaving, drawing the attention of the audience to some features of working with delicate material. Let's take a look at some videos.

Money Tree.

Such a tree is a talisman of wealth and financial well-being. Consider how to make a tree from beads and wire. In addition to beads of appropriate colors and pieces of wire of various thicknesses, you will need more coins so that the tree can play its role as a talisman.

Holes are drilled in the coins, for which they are hung on tree branches. A tree is set up in a well-lit place, a red ribbon is tied to the trunk, figures of a three-legged toad and other symbols of wealth are placed under the tree. Green beads are strung on wires of various thicknesses.

Video lesson:

Yin yang style bonsai tree.

Such a tree is made of two-color beads - white and black. Beads of the same color strung on a wire form petals, of which there are 9 pieces on each branch. When the petal is dialed, the wire is twisted. Next, three leaves are twisted in threes. The finished branch is wrapped with yarn in one layer on PVA glue.

The branches are tied together, the PVA yarn holds them together. Half of the tree is white, half is black. The crowns are pressed against each other, the trunks are twisted together, wrapping around each other. The tree is mounted on an alabaster base.

Video lesson:

Bonsai tree.

A master class is offered on how to make a classic bonsai tree from beads, with a short thick trunk. For weaving, dark green beads and a wire with a diameter of 0.3 mm are used.

The order of work is as follows:

• 8 beads are put on the wire, a ring is obtained from them.
• 8 beads are also put on the second end of the wire, and the same ring is folded. It turns out green leaves on a wire branch.
• 150 such leaves are made for the whole tree, but if the tree is conceived as small, you can get by with less.
• Twisting the leaves three together, we get 50 branches.

Video lesson:

Tree from beads.

This is a neat little Christmas tree with a height of 11-12 centimeters. It is made from dark green beads or silver if you are creating a blue spruce. The wire is selected with such a diameter that it can pass through the beads twice. This is necessary for needle weaving.

The color of the wire does not play a role, since it is practically invisible under the beads. For branches, elastic steel wire is required. A wire with a diameter of one and a half millimeters will go to its trunk. A thin wire is cut into segments of a certain length, from which the needles of the Christmas tree are woven, connected together.

Video lesson:

Love tree.

This tree, reminiscent of sakura, brings happiness and love to the house. It is done quickly, the cost of materials is low, weaving from beads is simple, but beautiful. For work, pink large beads and a wire 0.3 mm thick were used. The beads are put on the wire, and the wire is twisted, forming small legs.

The beads are collected in threes, after which they are collected into larger ones, and then a tree is formed from them. On the stand, the tree is fixed with alabaster, which, after solidification, will hold the trunk well. Alabaster is painted to match the color of the used beads.

Video lesson:

Dionysus tree.

The wire for stringing beads is 0.3 mm. Green beads are taken in different shades, this will give a more natural color.

• Beads of different shades are mixed with each other and typed onto the wire in random order.
• Beads strung on a wire are taken by 7 and twisted into leaves. It turns out wire branches with leaves that are collected in bunches. The twisting technique is shown in detail in the video tutorial.
• The bases of the branches are wrapped with paper on PVA glue. When the branches are connected to each other, it turns out very much like a living green branch.

Video lesson:

Autumn tree.

To convey all the shades of autumn, beads of red, orange, yellow and green colors are used. Wire with a diameter of 0.4 mm. Beads of the same color are strung on a wire, after which several beads are taken, and the wire is twisted, forming colored leaves.

Prepared twigs are wound onto a thick 2 mm wire with a tape. Each branch is assembled from beads of the same color, and then they are assembled into a whole tree. At the top, red twigs are used, below - orange, yellow, and green ones complete the work. The finished tree is fixed with alabaster on a stand.

Video lesson:

Sakura tree.

This tree is made of pink beads with the addition of natural stone - rose quartz and Swarovski glass beads. The barrel is made of plaster and mounted on a homemade stand. Each leaflet is formed from a wire, on which beads are strung, collected 10 pieces into loops. A branch is formed from such loops.

The loops can be located next to each other or with some indentation, then the branches are more fluffy. For a tree, about 30 such branches will be required. Rose quartz stones are also placed on the wire, each of which is fixed separately.

Video lesson:

Tree heart.

An interesting beaded valentine is knitted in the form of two branches of different colors woven together, forming the image of a heart.

Cutting and beads of white and red colors are used.

• White beads are collected on a wire with a diameter of 0.4 mm, from which flower petals of different sizes are formed.
• A flower is assembled from five petals, into which stamens are inserted - a single bead on a wire. Such colors will require six white and six red.
• Next, we start weaving twigs. A heart-shaped frame is bent from a thick wire, on which twigs and flowers are attached.

Video lesson:

Birch from beads.

Birch is made using the technique of loop weaving. Yellow beads are strung on the wire, then 14 beads are counted and bent into a loop depicting a yellow birch leaf. From such loops, leaves on wire legs are obtained, collected in a neat twig. Branches can be made different, there are 31 of them in total.

A barrel is made of thick wire, mounted on an alabaster on a stand. Branches are screwed onto the trunk, forming a structure resembling a real tree. The trunk and branches are treated with plaster with the addition of PVA glue. The branches are painted with white gouache, and black strokes are made on them.

Video lesson:

Bead weaving is an ancient occupation that has not lost popularity in our time. Those who wish to master this skill need to be patient and persevering, because small beads do not want to fit into elegant patterns on the first try. It seems that volumetric figures are more difficult to make. This is not entirely true, for example, even novice craftswomen can weave beaded trees.

How to make a beaded tree with your own hands (tutorials for beginners)

There are several beading techniques. Beginners often use 2 of them: knot weaving for and stringing. It is in the stringing technique that trees and similar crafts are made from beads. One-color or multi-colored beads are put on the copper wire, after which loops are formed from the wire. They form branches, inflorescences and a crown. The main attention is paid to the selection of shades of beads. In a similar technique, you can create exotic, familiar and even mystical plants and wondrous beauty.

How to weave a money tree from beads

Feng Shui uses coins as a symbol to attract money luck. But these are not ordinary pennies, but special symbolic coins of a special shape and with a hole for stringing. Each drawing and hieroglyph carries a semantic load. For example, some coins can be worn around the neck as a pendant or woven into a bracelet. You can also string large beads or pebbles on “macrame-style bracelets”.

The coins are tied with a red thread. Their number also matters. For example, two coins are a symbol of attracting money. Six - attract good luck. Four and seven coins are not used in Feng Shui. Coins can be woven together with beads or tied with red thread and tied to ready-made branches.

It is better to buy coins in special stores that sell Feng Shui talismans. And the rest of the materials can be purchased at the needlework store.

For the money tree need:

• small beads of dark green, light green and yellow-green hue - 100 g each;
• copper wire with a cross section of 0.3 mm (coil);
• Chinese coins with a hole (the number is a multiple of 2) or ordinary iron coins;
• red thread - 1.5-2 m;
• wire for strengthening branches and trunk - 1 m;
• brown thread or floral tape for winding branches;
• PVA glue;
• alabaster;
• brown gouache paint;
• container for fixing (small pot);
• scissors, round nose pliers, wire cutters, brush, bead container.

Operating procedure

Branch preparations:

The whole tree will need up to 80 of these branches.

Formation of branches with coins and a trunk:

Installation:

If you have Chinese coins, you can tie them in pairs with red thread and tie them to an already finished tree.

Other original ones can be made from the remnants of beads.

How to make an autumn tree from beads

autumn trees look advantageous precisely due to the combination of bright shades - red, orange, yellow. Intermediate shades can be obtained independently - mix the primary colors in different proportions.

For a medium tree (height 15-18 cm) you will need:

• beads number 10 (medium size) red, yellow, orange and gold - 50 g each;
• beads No. 10 (medium size) green - 20 g (for individual leaves);
• copper wire 0.3 mm;
• gray floral tape
• aluminum wire 5 mm for side branches - 80 cm;
• sand, cement and alabaster to form the base;
• foil to protect branches.

To begin with, you can only buy wire and beads, and the rest of the tree components can be purchased in the course of work.

Operating procedure:

From red beads you need to make:

• Small branches (9 loops): 10 pcs.
• Medium branches (15 loops): 12 pcs.
• Large branches (21 loops): 10 pcs.

Similarly, you need to make sprigs of their red, orange and gold beads in the same amount. Part of the beads can be mixed and part of the twigs can be made in mixed shades. In autumn branches, you can add 1-2 leaves of green beads. The total should be: small twigs - 40 pcs., Medium - 48 pcs., Large - 40 pcs.

Assembly:

Tree base:

The photo shows how to make autumn beads from beads. maple tree.

How to make a Yin-Yang tree from beads

Yin and Yang are two elements two opposites, male and female attractive start. The dark and bright fields are symmetrical, but not the same. They complement each other, creating harmony.

For the Yin-Yang tree you will need:

• beads No. 10 black and white - 100 g each;
• white and black wool threads;
• copper wire 0.3 mm - coil;
• bowl, alabaster, cement, sand for the base.

Operating procedure

When both trees are ready, Let's start building:

By this principle, you can make a tree of love from beads. One has only to choose contrasting colors, in accordance with the temperaments of lovers. This tree can be a wonderful gift for St. Valentine's Day or for a significant date. And do-it-yourself colored ones for a girl and a guy, woven with their own hands, will help to maintain a romantic mood.

How to make according to the patterns of beads and elegantly arrange them, you can see in the photo.

How to make a beaded bonsai tree

Bonsai trees are a special kind of fine art that came to us from Japan. This is a landscape in miniature, which requires a lot of time, skill and patience. And if not everyone can grow a real bonsai, then even beginners can weave it from beads.

To make a bonsai you will need:

• beads No. 10 of saturated shades of green - only 300 g (it is better to take several shades and mix them in equal proportions - this will turn out beautiful play of foliage);
• copper wire 0.35 mm - coil;
• wire 3 mm for the barrel - 30 cm;
• light brown floss threads for branches and trunk;
• glue "Moment" for decoration;
• alabaster;
• bowl.

Operating procedure

You can “plant” a tree in a separate bowl or make a separate stand out of alabaster. Decorate the stand with decorative elements, pebbles or artificial grass.

White trees look elegant, as if powdered with snow. For their manufacture you will need:

• white, silver or bluish beads - only 300 g;
• copper wire 0.3 mm - coil.

Light branches are less noticeable, so you need to prepare a lot of branches. The scheme for making branches is the same as for the autumn tree, only more branches should be obtained:

• Small branches (7 loops): 45 pcs.
• Medium branches (9 loops): 60 pcs.
• Large branches (15 loops): 40 pcs.

Join branches together possible without winding. The contrast of copper wire and light beads looks very nice.

• Mimosa is a spring favorite of women. You can not wait for the holidays and make it yourself. In the video, the master talks in detail about all the stages of work and the rules for decorating a tree.

• The tree itself creates a festive mood. And making a Christmas tree from beads using needle technology will help brighten up the expectation of the holiday and save living Christmas trees from extermination.

Were you impressed by the beading lessons? Tell us about your favorite crafts made from multi-colored beads.

Beaded trees weaving technique for beginners (photo)

Beaded trees weaving technique for beginners (photo)

Bead weaving is one of the most common modern hobbies. Most often, this technique creates beautiful decorations and weaves pictures. But that is not all. A popular trend is flowers and trees made of beads. From small shiny beads, original and almost “living” trees are obtained that can decorate any interior or become a wonderful gift. At the same time, it is not so difficult to weave a tree with your own hands - it is enough to prepare the necessary materials and follow the scheme.

Where to find a beaded tree diagram

Weaving a fabulous tree without a scheme will be quite difficult for beginner craftswomen. There can be many “pitfalls” in weaving that are simply not known to beginners, but can greatly complicate the work. Therefore, it is best to navigate according to the scheme. You can find the right scheme of work on our website. There are also instructional videos and master classes with step-by-step photos that will help you deal with some of the difficult moments of work. The diagrams indicate the most complete information about all the necessary materials: the number and quantity of beads (indicated in grams), the thickness of the wire, etc. The progress of work is also fully disclosed there. The scheme describes in detail the method of making branches, how many of them need to be made for a particular model.

Getting Started

Before you start work, you can familiarize yourself with photo and video master classes, which explain in detail how to make a decorative tree from small beads. It is better to stock up on all the necessary materials in advance. The variety, color and size of the beads depends on how the finished tree should look. You need to make a Christmas tree - a small green one will do, an orange tree - combine small green beads with larger orange beads. In order to make a tree-amulet, you can combine beads with Chinese coins, natural stone or Turkish “eye” stones.
You will also need wire to work. It should be stiff enough to keep its shape well, but thin enough to easily string the beads.
For decoration, we need floral paper - it will hide the wire. If it is not possible to purchase this, in some cases ordinary threads are enough.

Basic techniques for weaving trees

Weaving branches by twisting Despite the bewitching appearance of the finished tree in the photographs, making such a tree is not so difficult even for a beginner. Weaving beaded trees is not so much a difficult task as it requires patience and perseverance. At the core are basic schemes that are familiar even to craftswomen who are just starting to study this type of creativity.
Tree bead weaving begins with the most important thing - weaving twigs. Depending on the type of tree chosen, the techniques will vary, but in any case, they are easy to master.


Weaving twigs by twisting The easiest way to weave twigs is “twisting”. To do this, beads of the desired color are strung on the wire. It should be a normal chain. We step back from the edge of the wire, count 3 beads and make a twist. We repeat twisting approximately every 5 mm until the ends of the wire with and without leaves are at the same level.
After that, we twist the remaining free wire around the working one - the result should be a zigzag on the leaves.
To make the tree more magnificent, you can make branches - so that the branch resembles the letter Y. To do this, we twist the free wire approximately in the middle, pick up a chain of beads and continue to work.
The result is a branch with very small leaves. In this way, you can make, for example, birch branches.






Eyelets. It is performed in exactly the same way as twisting. The difference is mainly in quantity. Take 6 beads instead of 3 - you get a small loop. You can take more (the amount depends on the model). In addition, the number of beads can be the same, but in order to make the Wisteria bead tree, you will need to make leaves of different sizes on one branch - from 6 to 14.


Loop weaving method



In order to weave a fabulous tree, you can use a pattern similar to "hoarfrost". We collect 3 beads on the thread, skip one. We pass one end of the wire through the 2 remaining beads. Then we string 2 beads on one end of the wire, skip 1, draw the wire. Likewise, at the other end. Then we connect both ends of the wire, fix it with 1 bead. You should get 2 "needles". We repeat weaving the required number of times, as necessary according to the scheme. You will get branches from which you can assemble a Christmas tree. A beaded fern will look very original - twigs can be made according to the same pattern.
















As you can see, using basic beading techniques, trees can be woven quickly and easily. If beginners have difficulty making the first crafts, photo master classes and training videos are created to help them.

We collect a tree

The number of branches for each craft may be different. If in order to make a birch you need to make 49 branches, then for some models you will need more than 100. The exact number is always indicated in the diagram or description.
When all the branches are ready, you can start assembling crafts. To do this, we twist 2 branches together, then adding the rest 1 at a time. We wrap each resulting large branch with 2 cm floral tape. We connect large branches together, wrap the flight one again to make the trunk smoother. Each large branch must also be connected to a solid base. For this, a rigid rod is used, if there is none, you can twist several wires or use any materials at hand: a wooden skewer or a pencil. We wind large branches to the base, close the wire with floral tape. If desired, it can be replaced with threads, and silk ones will look most impressive. Some craftswomen use gypsum to process the trunk: with its help, you can make the tree even more realistic. But using this material requires experience that beginners don't have. To learn all the subtleties of this work, you can watch a master class on making trees from beads with step-by-step photos or a training video.








When the beaded tree is completely ready, it remains only to “plant” it in an ordinary pot or any other suitable container and fix it with plaster, plastic or plasticine. After that, it remains only to give the tree the necessary shape, decorate with additional elements: for example, close the plaster with beads, beautiful pebbles. Everything - the bead tree is ready. The result is definitely worth the effort. And thanks to the simplicity of the technique, the weaving process itself is very exciting and interesting, and besides, it is possible to quickly build a whole garden of fabulous trees.

How to avoid mistakes at work

Even with strict adherence to the scheme, it remains possible to end up with a completely different tree that you would like to see. If this happens, there is a possibility of quitting the job. It is especially important not to lose the mood for craftswomen who are just starting to learn beadwork.


To make exactly that beaded tree and not make mistakes, you can watch step-by-step photos on the Internet or video master classes. But equally important is the right attitude to work.
Experienced craftswomen, authors of courses and training master classes are advised to set aside time every day that can only be spent on needlework. Attempts to weave crafts in between daily activities or in parallel with watching your favorite movie usually lead to the fact that nothing works. Needlework is shelved, and the creation of a tree remains only one of the graphs in the plan. Therefore, oddly enough, following the system is also important in a hobby. Every day you can allocate at least a little time - even for 10-15 minutes, but this will allow you to distribute work and not abandon it for lack of free time. You should not try to weave a beaded tree in one evening. For all its simplicity, this work is rather monotonous and requires attention. In addition, when working with beads for a long time, the eyes get very tired.
Another common mistake is to “wear out the old beads”. A fairly economical strategy, but does not always guarantee a good result. Beads, like any material for creativity, may eventually lose their appearance, and as a result, the work will not look the best.
This is also the source of the third mistake – “I’ll just try”. This attitude makes you take your work seriously. Initially, it begins to seem that the craft is just a “draft”, but the next one will be sure to be successful. In fact, when a beaded tree turns out to be completely different from what we would like, the fighting spirit is lost.

DIY beaded sakura

In conclusion - a small master class: let's do
. For work, pink beads are most often used to get cherry blossoms. But this is not an axiom: you can use red beads (the tree will turn out to be autumn), and green. In total, you need about 200 grams. To make the tree more realistic, you can use beads in two shades.
We turn to weaving branches of crafts. To make 1 leaf, we collect 6 beads on the wire, twist. We leave 1 cm, again we collect 6 beads. There should be 11 leaflets in total. We twist the branch starting from the top or bottom, as it is more convenient.
We do the rest of the branches in the same way. The more you make them, the more magnificent the sakura will turn out. Usually, 70 to 100 small branches are made from beads for a tree.















Next, take 3 branches-blanks and twist them together. You will get one big branch. We twist 2 large blanks together - this will be the top branch of the sakura branch. There should be 2 of them.
To make one middle branch, we take 3 large blanks, twist them together. There will be 3 middle branches in total.
The lower branches of sakura can be made 2 or 3. To do this, we twist 5 blanks.




We proceed to the assembly of the tree. We take the base - a thick wire, and fasten the upper branches. Wrap with floral tape.
A little lower we attach another wire, we attach the middle branches. Wrap the barrel with tape again. Even lower we fix the base with the lower branches, wrap it with tape or floral tape.





The tree itself is ready. Now we install it in a mold, bend it slightly, fill the mold with alabaster. We process the tree trunk with the same solution. In order not to damage the leaves, they can be covered with foil. When the solution is completely dry, cover the barrel with paint and then with varnish. When the trunk is completely dry, you can remove the foil and straighten the branches beautifully.

Given all the possible mistakes and having familiarized yourself with the master class, weaving a tree with your own hands is not so difficult. There are a lot of models of beaded trees - you can weave the usual apple trees, Christmas trees, sakura, etc. Or you can create an unusual tree with your own hands, as if from a fantasy world (for example, the same whispering Eywa tree). The principle of weaving in any case will be general, which means that it will not be difficult to cope with this work. The main thing is to connect your imagination and not be afraid to experiment.

Detailed tutorials on making trees from beads

Necessary materials

So, what do we need to make trees from beads: beads of various colors and quality, sequins, beads, wire of different thicknesses, rigid rods, floral tape, gypsum for fixing the product, decorative stones, sand and more. Actually, you shouldn't be so scared. Beading is not a one-day activity, so over time you will be able to acquire everything you need.
In this article, MirSovetov will tell you what techniques you can start with so that the difficulties caused by manufacturing do not discourage your appetite for creativity. Here, two examples will be considered to give impetus to your imagination, and the manufacturing process will be shown step by step.
So, for starters, we only need beads, leaf-shaped sequins, wire. At the final stage, it will only be necessary to choose a form for planting the resulting beaded tree.

thread for beads

Making the first tree - cherry blossoms

This tree is the best educational material for those who want to learn how to weave trees and flowers from beads. It is done quite simply, and the result is impressive.
First you need to cut a lot of pieces of wire. The length of each piece is about 25cm:

Now we string 5 beads on the wire and twist them into a loop at a distance of about 5-7 cm from the end of the wire. Stepping back 1-1.2 cm, we make another same loop. And in this way we make several loops (always an odd number), leaving the free end of the wire 5-7 cm long:

We bend the wire on the central loop

Twist the ends of the wire together

One branch of the future sakura is ready. Now you need to make about 100 such branches - it is with this amount that the beaded tree will look quite magnificent.
When the branches are ready, proceed to the assembly. Twisting the branches together, it is necessary to form bundles of 10-12 branches.

Twisting the branches together, it is necessary to form bundles of 10-12 branches

Next, we collect the resulting beams near the solid base. A solid base is ideally a rigid rod - a special metal stick for obtaining beaded stems or used to make artificial flowers. In the absence of such a stick, MirSovetov advises using improvised means - you can take a wooden skewer for barbecue, you can use a pencil, in general, everything that comes to hand. By winding the resulting twigs-bundles, the very shape of the tree is formed.
To make the tree trunk look natural, two main methods are used - winding the trunk with floral tape (this is such a sticky, slightly corrugated paper in the form of a tape) and winding the trunk with threads. Silk thread will look especially impressive on the trunk.
After that, it comes to planting a bead tree. You need to choose the appropriate form, method of decoration. With the help of gypsum, the tree is fixed in shape, and then decorated with any materials you like. Gypsum can also be replaced with other materials, for example, plasticine or a specific plastic that hardens over time.
So, the result of the last "gardening" work will be as follows:

In this case, some green beads were used to make the sakura tree, which are found in greater concentration at the bases of the branches. A glass square plate was used for planting, and artificial decorative stones were used for decoration. The barrel is wrapped with brown silk thread.

Making a red branch from sequins

Here we will consider another wonderful and very easy way to make pretty trees with your own hands.
For this method, you will need sequins in the form of leaflets.
Just like in the first method, first you need to cut wires 20-25 cm long. We will create branches from these pieces.
So, we string a sequin on a wire and twist a leg about 1 cm high under it:

We string a sequin on a wire and twist a leg about 1 cm high under it

We twist the free ends of the wire together and again make the next two leaves:

We twist the free ends of the wire together and again make the next two leaves

We twist the free ends of the wire together to the end. One branch of the future tree is ready. In this work, you also need to make about 100 such branches (the number varies based on the desired splendor of the tree). To make one tree branch, you will need about 10-12 branches of the main branches:

It will take about 10-12 branches of the main branches to make one tree branch

Twisting the branches-blanks together, we get a branch of a tree:

Twisting the branches-blanks together, we get a branch of a tree

beaded orange tree

beaded orange tree

Here, orange beads play the role of oranges. A wicker basket was used for planting, and artificial decorative stones and beads - fallen oranges - were used for decoration.
A sprig-blank for an orange tree made of beads is made according to the following scheme:

Twig-blank for an orange tree from beads

"Big-eyed" beaded tree

"Big-eyed" beaded tree

On this beaded tree, the role of “fruits” is played by traditional Turkish “eyes”

On this beaded tree, the role of “fruits” is played by traditional Turkish “eyes”.

Birch from beads

Birch from beads

The difficulty in making a birch is in the trunk. Ideally, you can find white floral tape. But if there are difficulties with the tape, then you can get by with a medical adhesive plaster. Next, with a black felt-tip pen, strips are applied to the trunk.

Sakura from beads

Mix pink 45 grams and green beads 15 grams (there are two shades of pink in the photos).

We cut the wire 70 cm for a small tree. We retreat from the end of 15 cm, make a loop. We string beads on the long end.

We make leaves of 4-5 beads every 0.5-0.7 cm.

We reach the loop, pour the rest of the beads into a bowl.

Fold the branch in half and twist

Fold the branch in half and twist

We straighten the leaves.

For a small tree, 5 small branches are taken in a bunch, for a more magnificent one - 8.

We make 9 such bundles.

In the example, 6 small branches were collected, only 9 large ones turned out, i.e. 54 small branches.

Then we twist 2 large ones - 3 pieces and one of the three large top branches.

Pot (casket)

You can wrap it with white floral ribbon, wire turn to turn, or floss threads.

We plant in a pot in plasticine or silicone

We decorate the ground

We paint the trunk with brown paints, in the example, ordinary, children's ones are taken. Be sure to straighten all the branches and the tree is ready! Weeping Willow Tree

Weeping willow is a delicate tree with a thin, slender trunk and long, delicate branches that descend to the ground. Here is a tree I tried to make from beads.

It took about 100 gr. green beads and about 30 gr. light green color, thin wire for branches, steel wire for the trunk, florentine, floor sponge, pot, pebbles for decoration.

From light green beads we make the upper small branches, then I mixed the remaining light green with green beads and the lower, long branches were made only from green beads.

Step 1.1. We cut a thin wire into segments from which we will form branches. We string 7 beads, shifted to the middle of the wire (Photo 1).

Step 1.2. Then twist several times (Photo 2).

Step 1.3. Now we make such a leaflet on one side, then on the other and twist the wire again (Photo 3).

Step 1.4. Then twist a few times
(Photo 4).

Step 1.5. Thus, we make the required number of leaves on the branch (Photo 5).

Step 1.6. So, we do everything: 14 branches of light green color, 17 leaves of 7 beads,
24 green branches with 17 leaves of 7 beads, 24 green branches with 25 leaves of 7 beads, 17 green branches with 33 leaves of 7 beads. It turned out such a bunch of branches (Photo 6).

Now we collect branches from 4-5 long branches, 5-6 medium, 3-4 small branches, screwing them onto thick wire rods. We wrap the branch with florentine, pulling it tightly. (Photo 7) I got 5 such branches.

Now we cut off several pieces of thick wire and form the trunk and roots (Photo 8).

The willow has a very even and smooth trunk, so we wrap all the irregularities of the wire with rags cut into thin strips (Photo 9).

We wrap the trunk with floral tape (Photo 10).

Now we strengthen the tree into a floor sponge (Photo 11).

We put the tree in a pot, cover it with pebbles, fix everything with glue.

We straighten the branches, bending them in the right directions. Our tree is ready (Photo 12).

Sakura

From five beads we make a loop, twist, then we make another loop around, immediately giving it the shape of a leaf. I made 170 such branches-blanks of 3 leaves on each.
Then we twist them 2 branches together. And from them we are already making blanks for the main branches - we collect 3-4-5 such branches in bunches. Wrap with floral tape or thread.
From such bundles we make the main branches, wrapping them with floral tape or masking tape on a thick wire.

Fig. 5 - on it we have the main trunk, and the formed crown, we thicken the branch with a winding to the thickness we need, we make a bend. And we wind the rest of the branches. I have 4 sides.

We give the trunk and branches the intended look, since after plastering the trunk with gypsum, you don’t need to touch the tree until it dries completely, otherwise severe cracks will appear.
Before plastering, I wrap the trunk again so that nothing sticks out, we check if the branches are staggering. We fasten the tree to the stand. I use a glue gun for this. If you plant a tree on gypsum in a plastic pot, remember that they crack from gypsum, and very often.
I spread the gypsum with PVA glue, coat the trunk and twigs with a liquid mixture with a thin layer, a thin synthetic brush (I bought it at a hardware store). When everything dries, you need to apply the bark, for this the mixture becomes thicker. twigs. We make the roughness. I make the bark itself and the grooves with a small knife from an old manicure set. Here it is necessary to catch the moment when the gypsum begins to dry out a little, then we form it. When this layer dries up, we remove everything superfluous with a small file, if the dried piece of bark has fallen off, it can be attached with a wet brush.

Then we paint with acrylic paint (you can also use gouache, but adding PVA to it), I usually use many shades ... For example, thin twigs are light, then darker, the trunk is greenish from moss ...
Since the gypsum gave us roughness, we will use this when painting, we apply the last layer with a “dry brush”, that is, the brush should be hard, rough, dry. We dipped it into the paint, holding it perpendicularly, trying to remove excess paint from the brush (I use an old cutting board for this). There should be very little paint left on the brush. We hold the brush perpendicular to the trunk and gently pass the brush along the texture of the bark, barely touching, we try not to get into the cracks in the bark. Let dry again. Then we take another shade and repeat the painting procedure. The next layer can be lighter, or vice versa... The number of layers is not limited. From above, you can walk with mother-of-pearl paint (gold, copper), this will add a little shine. But all layers only with a DRY brush!
If you don’t like something, paint it dark again and experiment again.

I make a coaster - pebbles, glue gun, glue all small pebbles on varnish (acrylic)

I varnish the wood.
ALL!!!

Olive

Material: Small beads of four colors - salad, light green, green and dark blue.
50 oval glass green olive beads.
For leaves: wire 0.35mm 50-60 m, brown or green.
For twigs: 9 pieces of 35 cm wire 1 mm thick.
Brushes for thickening, floral tape, silk threads for the trunk and twigs, glue, pebbles, ceramic stand.

Leaf making:
7 leaves in French weave with a central row on one wire. Each leaf consists of 4 rows. Dial a lot of beads on a coil of wire (at least 60 centimeters). Leave 15 cm of bare wire (this is the center of the branch), separate 9 beads, and twist the 10th bead four times (this is approximately 4 mm and is the central row for a leaf of 4 rows). The 10th bead is the top of the leaf and there is no need to bend the central row at the end of weaving - fig.1.
Then count another 9 beads and twist a loop of 18 beads twice - fig.2.
Now, as with French weaving, lift the thread with beads up, wrap around the single 10th bead - fig. 3 and lower it down, make a 1 cm shank - fig. 4.
We make side leaves: count 9 beads, leave about 12 millimeters of bare wire - Fig. 5 and twist under the 10th bead four times - Fig. 6. Then we count 9 more beads and twist 18 beads twice - Fig. 7, make the third row - Fig. 8, then the fourth row and the stalk - Fig. 9. We make the third leaf on the other side - Fig. 10, twist in the center 1 cm - Fig. 11. Then we make the fourth leaf - Fig. 12, etc., in total 7 leaves - Fig. 13.
If you want to make a leaf with a large number of rows, then near the 10th bead you need to twist more times so that there is a greater distance - Fig. 1. And in the second and subsequent leaves, leave bare wire not 12 mm, but more - Fig. 5.
Make 36 such branches of 7 leaves: 19 lettuce, 6 light green, 11 green. In all shades of green beads, dark blue is added in a ratio of one to eight to make specks.

Olive production:
We string a bead, an oval bead, a bead onto a coil of wire. We leave a bare wire of 15 cm and with this end, skipping the bead, we pass only into the bead and now we twist both ends of the wire under the second bead at a distance of 1-1.5 cm. stalk 1.5 cm. Two olives turned out on one wire.
Make 16 double and 18 single olives from 50 beads.

Assembly:
From 9 pieces of wire 35 cm each, make 9 branches of 4 branches with an interval of 1-2 cm. Place olives in these intervals. Collect everything with the help of a floristic tape, which is cut in half lengthwise to make a tape 0.5 cm wide. And at a distance of 13 cm from the top, wrap the branches with brown silk threads.
(Then, after the final assembly and planting of the tree in a ceramic vase, to form a crown, bend these wrapped parts of the branches with a thick knitting needle, winding it around it).
Make two large branches from 4 and 5 branches, adding thickening brushes in the right places. Wrap with floral tape, and then with silk threads on top at a distance of 8-9 cm. Now connect these two branches into a common stem, also adding brushes in the right places. Bend it and wrap it with floral tape, and then with silk threads on top. Plant in a ceramic vase and strengthen with a glue gun or plaster and finish the decoration to taste.

Additions:
In the master class, I indicated a wire thickness of 0.35mm, since 0.3mm - the wire is weak for so many leaves on a branch, and 0.4mm - I think it will be difficult to twist the top bead. But if you still took a wire 0.3 mm thick, then the twig can be strengthened like this: when you have woven three leaves (Fig. 10, see the master class), additionally take another piece of wire 25 cm long, fold it in half and put it between the leaves, now the center of the twig is between your leaves will be twisted from four wires (and not from two - as in Fig. 11). I will put this addition in the master class and another photo of the coil of wire on which I wove olives and autumn trees.

wish tree

You will need:
1. Wire

Trees made of beads are a separate area of ​​creativity, sometimes it is impossible to believe that this can be created from ordinary beads and wire. Today we understand the technology of making trees from beads.

Weaving a tree from beads is a laborious process, because the master creates each branch, each leaf by hand. Gradually forming the crown of a tree from small details, a whole tree is obtained. At the same time, many different schemes have been developed today that convey the features of different types of trees.

How to weave a tree from beads?

To weave a tree, you first need to master the basics of beading, namely the sequence of stringing glass beads on a wire and forming even loops.

For work you will need:

Bead tree: instruction

Since each tree is individual and differs in texture, there cannot be a single instruction, each scheme is individual. And even starting to work, you will be convinced that your result will differ from the original picture.

Bead Tree for Beginners

For beginners, it is worth starting work with the simplest tree according to the scheme - sakura. You will need only one color of beads in a soft pink shade.

1. Cut about 1 meter of wire for the first branch.
2. String 6-7 beads on the wire and fix them by twisting the ends of the wire as shown in the figure, so that you get a petal.
3. Step back about 1-1.5 cm and repeat the steps from point 2.
4. Make 11 petals, fold the wire in half and weave the petals in pairs to make a twig.
5. For a whole tree, weave about 90-120 such branches, large branches will be obtained by weaving 3 ordinary ones.
6. Gradually wind all the branches onto a thick rod forming a trunk, use adhesive tape to secure the fastening.
7. To attach the tree to the base, use gypsum or alabaster, mold the bark of the tree and roots smoothly into the ground on the existing base. Be careful not to stain the crown of the tree.

Tree from beads, scheme for mountain ash

To collect a bright autumn beauty, you will need not only beads, but also bright red beads that look like berries.

1. Each branch of rowan consists of 9 leaves and a bunch of berries. For the leaflet, use the diagram below.
2. Cut the wire about 70 cm long, place a green bead in the middle.
3. For the next row, pass both ends of the wire through 2 beads and pull them up so that they are above the bead of the first row. And so on according to the scheme, collect 9 petals.
4. For berries, cut a wire about 70 cm long, place a black bead in the middle, pass both ends of the wire through a large red bead, and then through brown beads. According to this scheme, collect 16 berries for one bunch.
5. Form a sprig of berries and petals. For a tree, you will need about 70-100 branches.
6. Form all the branches into a crown and twist around the stem-rod, with the help of plaster, fix the tree on the base.

Incredibly beautiful winter mountain ash can be made using transparent beads to simulate snow.

Step by step beaded autumn tree

To weave an autumn tree, you need to use beads of yellow, red, green tones. For example, a step-by-step scheme for weaving maple.

1. A maple leaf consists of 5 individual petals. Each petal is woven according to the following pattern (refer to the pictures below):

• string 1 red bead on the wire and place in the center
• pass the two ends of the wire through two red beads
• pass the two ends of the wire through the red, yellow and red bead
• pass the two ends of the wire through the red, two yellow and again red bead
• pass the two ends of the wire through 3 yellow beads
• pass the two ends of the wire through 2 yellow beads
• pass the two ends of the wire through 1 green bead

• When weaving the next petal in the fifth ore, pass the wire through the fifth row of the first petal so that they hold together. Finish the petal as shown in the diagram, twisting the ends together.

1. Assemble a leaflet from 5 parts, you will need about 150 leaves in total
2. Form sprigs from 3-5 leaves, twisting the ends and securing with floral tape
3. Form a tree from the branches, the ends of the wire can be wrapped around a heavy stone, which will be the basis
4. Using plaster or alabaster, give the texture of the tree to the trunk
5. Once dry, paint with acrylics.

Tree of beads and copper wire: step by step photo

The combination of delicate blue beads and rich copper color gives a feeling of an air haze around the tree. In this example, the wire will remain uncovered, since such beauty cannot be hidden in any way.

We offer instructions for creating such a tree with a photo:

1. String 17 beads on a piece of copper wire about 80 cm long.
2. Form a loop in the middle of the wire, step back about 1 cm, string the beads again and form a loop on each side of the center.
3. Twist to form a branch. Each branch should have seven petals.
4. Twist about 150 branches in total.
5. From 3 branches, collect a large branch, you will get 50 branches in total.
6. Collect the entire trunk from large branches, forming separate large branches and smaller branches, increasing the volume towards the bottom. Wind the ends of the wire into a ring of small diameter.
7. Dilute the gypsum in a container, fill a mold under a tree by a third and place the ends of the wire there, pour in the remaining gypsum and hold for 10-15 minutes until the mixture sets.
8. From above, gypsum can be sprinkled with the remains of beads.
9. Arrange the branches as you wish.

Money tree from beads

It is believed that a money tree or a fat woman will bring prosperity to the house, but if you are not a plant lover, then you can weave an artificial tree with your own hands. For work you will need:

• beads of several shades of green
• wire
• coins
• gold paint
• scotch

1. Cut a wire about 70 cm long, string 7-8 beads of various shades on it and form a loop, string another 7-8 beads without indentation, form a second loop, repeat 6-8 times, as a result you will get a dense bud.
2. Twist about 60 buds for a small tree.
3. Cut the wire about 50 cm long, form a small loop in the middle and twist the ends. Glue a coin to the loop, you will need 15 of these branches.
4. Take 1 coin branch and 4 green ones, twist together, repeat 2 more times and collect a large branch from the resulting 3 branches by wrapping the wire with paper adhesive tape. Color the ribbon golden brown. Repeat for other branches.
5. Attach all branches to the stem-rod, wrap with tape and cover the trunk with plaster. Using acrylic paint, give the natural color of the wood to the plaster.

Yin-Yang tree from beads

The Yin-Yang tree is a combination of two colors of beads, white and black, symbolizing the feminine and masculine, as well as their relationship and complementarity. In nature, of course, you will not find such trees, but with the help of beads it is easy to betray this idea.

You will need white and black beads, thin wire, a rod and a base.

1. Cut the wire into pieces about 70 cm long.
2. String 5 white beads onto the wire and form a loop in the middle, retreat 1 cm from each side, form 2 more loops and continue until you get 7 loops on the branch. Wrap the twig with white thread or ribbon. Collect 50-60 white branches.
3. String 5 black beads onto the wire and form a loop in the middle, retreat 1 cm from each side, form 2 more loops and continue until you get 7 loops on the branch. Wrap the twig with black thread or ribbon. Collect 50-60 black branches.
4. Collect the branches of each color into a tree and twist their trunks together.
5. Attach to the base with plaster, decorate the top of the base with a Japanese pattern, the Yin-Yang symbol.

Tree of love from beads

According to the manufacturing technology, the tree of love is very similar to the Yin-Yang tree, two colors are also involved here, but not as contrasting combinations as black and white, but more delicate ones, for example, blue and pink, white and blue, etc.

Such a tree will be an excellent gift for a wedding, because it will symbolize the strength of the bonds of the family that was born today.

1. Cut the wire into pieces about 70-90 cm long.
2. String 5 pink beads onto the wire and form a loop in the middle, retreating 1-1.5 cm from each side, form 2 more loops and continue until you get 7 loops on the branch. Wrap the twig with pink thread or ribbon. Collect 50-60 rose branches.
3. String 5 blue beads onto the wire and form a loop in the middle, retreat 1 cm from each side, form 2 more loops and continue until you get 7 loops on the branch. Wrap the twig with blue thread or ribbon. Collect 50-60 blue branches.
4. From small branches of each color, form larger ones.
5. Collect the branches of each color into a separate tree, weave the bases of the trunks together and lay out the halves of the heart from the branches of each color.
6. Attach to the base with plaster, paint the trunk pink and blue, on the base you can draw the initials of the newlyweds and the date of the wedding.

Wisteria - crafts from beads

Wisteria is one of the most beautiful flowering plants on earth, bright colors and incredible color transitions can conquer anyone. In beads, you can convey this beauty using various shades, and the heaviness of the resulting branches will give the necessary shape.

You will need:

• beads in purple, soft pink, green and blue shades
• wire
• core and base

1. Cut the wire into 100 pieces 1 meter long.
2. On each piece of wire, roll the loops as shown in the diagram, smoothly changing color from white to purple, twist the branches. Collect 70 white-purple twigs.
3. On the remaining pieces of wire, twist green loops for foliage.
4. Collect all the branches, imitating the hanging crown of wisteria.
5. Wrap the ends of the wire around the heavy base and fill with plaster.

Master class pine beading, scheme

The most popular trees in Russia are spruce and pine, they can also be made from beads and even decorated for the New Year.

• Cut the wire into pieces 30 cm long.
• String 8 beads onto the wire, leaving the last bead, pass the second end of the wire through the remaining 7, so that you get a needle.

• On the remaining end of the wire, string 8 beads again and repeat step 2. You should get 5 needles on 1 wire, then twist the ends.

• A small pine tree will need 150-200 of these blanks.

• From small branches we twist large ones, fixing with tape or tape.
• We assemble the trunk from large branches, twist the ends of the wire into a coil and fix it at the base.
• Straighten the branches to make the pine fluffy.

beautiful beaded tree

A beautiful tree can be obtained using several different techniques and by mixing materials, for example, add pebbles by gluing them on loops, or use bright leaves.

Photo: Tree of beads

For you, a few more tree ideas that can be made from beads.

Beading technique opens up huge opportunities for you. From such tiny elements you can create serious masterpieces that will decorate your home and a great gift for family and friends. New creative success to you!

Video: Bead tree