How to make a rabbit out of paper using the origami method. How to make a paper rabbit (for beginners). Great hobby for the whole family

Let's try to master the art of origami using this gift paper rabbit as an example. It is assumed that you already know basic origami techniques like reverse fold.

Step 1: Materials

colored paper
penknife
Ruler

Step 2: Template

We need to turn it into an A4 sheet and cut the rectangles along the dotted lines. You will need 1 large, 1 medium and 2 small squares.

Step 3: Start

Take a large square and fold it in half. The pattern must be visible on both sides from the outside.

Step 4: Preparation

We unfold the sheet back with the side without a pattern to our face.

We bend the edges, as shown in the figure, so that 2 hieroglyphs can be seen.

Step 5: Corners

We bend all 4 corners to the middle line of the square.

We get 2 triangles on the left and right. We bend them towards the center.

Step 6: Reversal

We unfold again. Now we need to make not 2 triangles on each side, but 2 rhombuses with the same sides. We hold the sheet with one hand, and with the other we slightly raise and smooth first 1 triangle from above, then from below. We act similarly on the other side.

Step 7: Eyes

We turn on the part of the rhombus, as shown in the figure. Before us, 2 points should be visible, the eyes of a rabbit.

Step 8: Fold

Turn the paper over and fold it in half to create a crease in the middle.

Step 9: Ears

We bend along 2 edges on one side (see picture) to make rabbit ears.

Step 10: Head

We turn over. Create the head by folding the top part.

Step 11: Form

We fold the paper product in half.

Carefully draw out the ears.

We make bends so that the neck is visible.

The origami rabbit scheme is available for all ages. Origami rabbit is performed according to the following points

1. Let's outline the middle line and fold the sides to it.

2. Sequentially fold the halves of the upper side to the central vertical. We will open and flatten two pockets, turning the outlined lines of the “valley” into “mountains”.

3. Let's check the result - we got two triangles. After picking up one layer of paper, begin to align the long side of each triangle with its top. Open and flatten the bottom two pockets. The top edge of the figure is bent down.

4. Check the result and turn the figurine over.

5. Bend the sides to the central vertical.

6. The position of the fold line is determined by eye.

7. Open the back of the resulting strip. The fold lines are inside. Their position is shown by dots.

8. The fold line comes out of the corner and bisects the corner.

9. Let's open and flatten the pocket, throwing the lower right part of the figure to the left.

10. Bend the left half of the figurine back and turn the figurine.

11. Bend the left side in half, bending the horizontal edge down. Let's repeat the action from behind.

12. Pull out two layers of paper.

13. Front and back, bend the left vertical edge to the right edge.

14. On the right, we will bend the triangle inward, and on the left, we will perform the technique invented by Neil Alais. This is not an easy action. On the right in the upper part of the figure are three "ribs". The first and third ribs must be flattened.

A paper rabbit can become a Christmas tree decoration, help you tell a fairy tale to your child, or “act in” at home. To give the figurine color, you can pick up beautiful paper.

You will need

● Paper
● Scissors
● Ruler

Instruction

First, on the sheet, you need to outline a line that crosses it diagonally.
The next step is to turn the sheet so that the fold line lies vertically towards you. After that, the sides of the sheet are folded to the middle line to make a kind of "kite".
Now the “head” of the kite (that part of it that was not folded to the center) needs to be bent down along the dividing line of the “head” and “body” of the kite, that is, bent to the parts of the sheet folded in the previous paragraph.
Next, we mentally divide the “head” of the kite into two parts by a horizontal line approximately in the middle and bend it in the opposite direction from the “torso”.
In place of the former "head" of our future crafts, we see 3 triangles. One is directed with its apex in the opposite direction from the figure and is located in the middle, while the other two triangles look at the figure with their vertices and are located at the edges. We sequentially add them along the line connecting them with a large triangle.
Flip the resulting figure.
We see two parts of our figure - the main one and the triangle, which is visually separated from the rest. Ignoring this triangle, fold the figure in half with a horizontal line
Now fold in half away from you with a vertical line.
Now we have a quadrilateral. If you look at it so that the figure is located sideways, then we will see that it is divided into three parts - a long triangle, a smaller triangle and a trapezoid. We take a long triangle and pull it up and towards ourselves (the craft is located towards us with two corners) by about 45 degrees. We got future ears a rabbit.
Cut the triangle that you wanted to pull towards you in the previous step in half from the sharpest corner to the right corner of this triangle.
Symmetrically bend a part of each ear down so that the ends of the ears look at the floor.
Lift up the top layer paper on each part that was bent in the previous step, and press it to the figure. You should get two triangles with an additional fourth corner at the base in the middle.
Now, without taking into account the fourth corner in the middle, bend the ears back along the base of the triangle and press the upper half of the ear slightly against the lower half on each side.
It remains only to color the resulting model as you like, and the rabbit is ready!

Origami paper figures can not only decorate the room and give the interior a thematic mood, but also become a great way to have fun and spend time usefully. How to make a rabbit out of paper? There can be a huge number of options for instructions. Some models, the simplest ones, can be made even by beginners.

cute bunny

Cute handmade bunnies can become a cute Easter decoration. It is advisable to use special paper for origami, but this is not at all necessary. How to make a rabbit out of paper? If you train well and follow the instructions carefully, it may take no more than one minute. It is better to start practicing the art of paper folding with the simplest and least time-consuming and patience figures.

Necessary materials

For work you will need:

medium weight paper;
coloring materials (markers, paints, colored pencils).

Instruction for beginners

First you need to decide on a color. It can be an ordinary white bunny, but you can consider more interesting and bright options. You can draw a muzzle and ears both before and after folding. But it is best to apply tinting and background graphics in advance. If paints are used for coloring, then the main work should be started only after the base has completely dried. Detailed instructions will answer the question of how to make a paper rabbit. So let's get started:

1. Fold a square piece of paper in half diagonally to make a triangle.

2. Carefully fold the side of the triangle that used to be the diagonal for the square.

3. Then we fold the figure in half so that the fold line from the previous step is not visible, and then unfold it back.

4. Take one of the sides of the triangle (ear) and fold it to the top without crossing the fold line from the previous step.

5. Do the same on the other side.

6. Turn the rabbit right side up and fold the bottom corner inward about 2 cm to make the chin less pointed.

7. Do the same with the upper part of the muzzle.

Ready! So you have learned how to make a rabbit out of paper, even if it is one of the easiest options possible. You can do everything according to the template, or you can go even further and use scraps of paper, natural materials, fabric, stickers, rhinestones, and so on. Give free rein to your imagination!

How to make an origami paper rabbit?

The Leaping Paper Bunny is a variation on the traditional origami jumping frog. This fun project is also fairly easy to complete. Thanks to a special way of folding, a spring effect is achieved. If you press on the rabbit's back, it will bounce up. Fast and fun, but what a joy for the kids!

What will be needed? A sheet of paper, felt-tip pens, scissors, glue or tape. Detailed instructions will show (origami for beginners):

Take paper or cardboard with dimensions of 6 by 10 cm. For best results, the blanks should have straight sides and square corners. Bunny size may vary. The main thing is to keep the proportions (3:5). You also need to prepare small pieces of paper or cardboard of the same color to make the ears, otherwise the bunny will look more like a frog.
Fold the sheet along the dotted lines as shown. This will help to make a triangle that will contain two more triangles.
Then fold the bottom ends of the large triangle towards its top.
The sides of the rectangle also fold to the center.
After that, the lower part of the rectangle is superimposed on the upper part of the figure. The lower corner of the rhombus serves as a guide for laying the fold.
We cut out two rabbit ears and use glue or tape to attach them to the head of the animal. You can also draw eyes and a nose on the head.
In order for the rabbit to jump, you need to fold a Z-shape from the back of the figure, which will act as a spring.
All is ready. Now you can have competitions with your friends to see whose rabbit jumps the highest.

Great hobby for the whole family

With the help of paper, you can do anything, from cute animals to original decor elements. Now you know how to make a do-it-yourself paper hare (origami). All you need is paper, paints, pencils and a little imagination.

Origami rabbit is one of the most popular paper origami. If you do not know how to make an origami rabbit, then on this page you will find everything you need to assemble this simple paper figurine.

In the first photo you can see what you get if you follow the assembly diagram below. The second photo of the origami rabbit was taken by one of our site users. He turned out to be a rather interesting and at the same time uncomplicated rabbit made of paper. If you have photos of the origami you have collected, send them to the address This email address is being protected from spambots. You must have JavaScript enabled to view.

Assembly diagram

Below is an assembly diagram of an origami rabbit from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then the assembly of the origami rabbit will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make an origami rabbit quickly and without peeping into the diagram.

Videos master class

Assembling an origami rabbit for beginners can seem like a daunting task. Therefore, we advise you to enter the query "origami rabbit video" on the largest video hosting site on the Internet, YouTube. There you will find many different videos about the origami rabbit, which clearly show the steps for assembling the rabbit. We hope that after watching the video of the assembly master class, you will have no more questions on how to make an origami rabbit.

You can easily assemble a similar paper rabbit by watching this tutorial video:

If you need an origami of a running rabbit, then this video will teach you how to make it:

Symbolism

The rabbit in many cultures is a lunar animal, a companion of the moon goddesses. The image of the rabbit was actively used in paganism. In a broader sense, the rabbit has become a symbol of fertility and vitality.