How to crochet moccasins on the sole with your own hands. Detailed master class. Beautiful and cozy slippers-moccasins with your own hands! Detailed description of the work Crochet baby moccasins

Moccasins have always been considered the most comfortable, lightest shoes. We will crochet slippers using the principle of the structure of moccasins.

Let's start knitting with a triangle, which is called the outer toe. Then we knit the sides and the sole. In each detail, we start counting the rows from the first row.

Slipper size 37-38.

Materials and tools:

For work, I took bulk yarn 100% acrylic in three colors.
Hook number 3.5.
Scissors and tapestry needle.

Abbreviations used in the text

VP - air loop;
runway - air lifting loop;
RLS - single crochet;
CCH - double crochet;
PS - a magnificent column.

Description of work

sock

Outer toe We start knitting from the base of the triangle. We collect 15 VP.

1 row. 3 runways, in the fourth loop from the hook we knit a magnificent column: it consists of knitted 3 runways and two double crochets, knitted in half. Then we knit 3 loops on the hook in one go. We get the first lush column with a common top. Further, in each row, we knit the first magnificent column in this way. Then we knit ** 1 VP, skip one loop of the previous row, and in the next loop we knit a magnificent column of 3 CCH with a common top **. We repeat the pattern between the stars so that 8 magnificent columns are obtained in a row. In the last loop of the PS, we change the color of the yarn, we do not cut the working thread of the first row.

2 row. 2 runways. We knit lush columns in this row between the PS of the first row, introducing a hook under 1 VP. After each magnificent column we knit 1 VP. Lush columns are arranged in a checkerboard pattern.

3 row. Change the yarn color to orange. And we knit 6 lush columns in this row.

4 row. Again we pick up a dark green thread and knit 5 lush columns.

5 row. We knit four lush columns with a light green thread. At the end of the row, cut off the light green thread and switch to the orange thread.

6 row. We knit three lush columns with an orange thread. And go to the dark green thread. In total, for this size, seven rows should be connected and in the last row there are two magnificent columns.

Borders

When the triangle is ready, you can start knitting the sides. We introduce a hook on the right side of the triangle, pick up the thread and knit 35 VP. The number of loops depends on the size of the foot and the thickness of the yarn and hook, but in any case, it should be odd. We attach a chain of air loops to the second side of the triangle with a connecting loop.

1 row. We knit the sides with double crochets. We knit 2 runways, we knit the first double crochet into a loop, from which we knitted lifting loops. On a chain of air loops we knit 35 CCH.

We lay the free "tails" of the cut threads along the row and knit them into the canvas. When we reach the top of the triangle, we knit 3 CCHs from the side of the row, 3 CCHs into the arch between the lush columns, 3 CCHs on the other side of the row.

We continue to knit 3 dc on each side of the row. When we knit the third column of the last side, we knit only a crochet, then we insert the hook into the first column with a crochet of the beginning of the row and change the color of the yarn to orange.

2 row. 2 runways and 1 SSN in the same loop. Next, we knit columns with a crochet in each loop of the previous row.

In the toe part, we also knit without additions.

3 row. Enter the third color. 2 runways and 1 SSN in the same loop. Do not forget to tie the free ends of the thread into the fabric so that the wrong side is clean.

In the toe part we knit without additions. We do not cut the dark green thread.

The board is connected. Fold the workpiece in half, find the middle of the back and toe.

Mark the center of the heel and toe with a marker or thread of a contrasting color.

Sole.

We start knitting from the place where we finished knitting the side.

1 row. 2 runways and knit with double crochets to the middle of the heel, marked with a contrasting thread. We knit 3 CCH with a common top: in each column we knit a loop with a crochet.

We knit 4 loops on the hook in one step.

In the toe part, we also knit the central three columns with a lush column with a common top.

We knit a row to the end with double crochets. We close the row with a connecting loop into the second lifting loop. This is the first row of the sole.
2, 3 and 4 rows knit as the first.

Cut the thread and fasten.

Take a tapestry needle. Having fixed the thread at the beginning of the row, we begin to sew the workpiece with a seam over the edge. We capture both parts of each loop with a needle.

almost ready.

It remains only to tie it. We introduce a working thread, knit 1 runway and tie the upper part with single crochets.

We tie the base of the triangle in this way: we knit one RLS at the top of the magnificent column, we knit the next RLS under 1 VP.

We change the color of the thread and knit the final row with a “crustacean step”.

Similarly, we knit the second slippers.

Slippers-moccasins are ready.

The master class was prepared by Svetlana Chalkina

Like the product and want to order the same from the author? Write to us.

More interesting:

See also:

Booties "bumps", crocheted
In our section "Knitting" replenishment: meet cute crochet booties, a description of the work from Mar...

Knitted booties - unicorns
Now a very fashionable theme for girls is unicorns (winged horses with a horn on their foreheads that grant wishes) ...

Booties "Sheep"
Another master class by Lilia Pervushina is crocheting booties for a newborn in the form of sheep. ...

We start with the sole.

Knit the sole as follows: cast on a chain of 10 loops, then make a single crochet in 2 loops from the hook and the remaining 8 loops in stb, and you have 9 loops, that is, stb. It was row 1.

2.3, 4, 5.6 row we make an air loop and then in each column, or (loop) we knit 1 stbn.

7 row we make an addition: we knit one stbn in the next 4 loops in the 5th loop we knit 2 stbn further 1 stbn in the remaining 4 loops, that is, you should have 11 stbn

8 row and 20 knit in each loop for 1 stbn and that 11 loops in each row, but do not forget to make an air loop at the beginning of each row.

21 rows in the first 4 loops, one stbn each, then in the 5th and 6th loop, 2 stbn each and the remaining 4 loops, 1 stbn each.

22 row of 26 air loops and dalia in each loop for 1 stbn and that 12 loops i.e. stbn.
27 row we make a decrease, we knit the first five loops of 1 stbn, and we knit the 6th and 7th loop together stbn, the next 5 loops of 1 stbn each should turn out 11 stbn

28 row air loop and in each loop 1 stbn total 11 stbn

29 row we make a decrease as follows: we knit the first 4 loops by 1 stbn, then 5,6,7 we knit the loop together with one stbn, the next 4 loops by 1 stbn, it should be 9 stbn

30 row 1 stb in each loop and you should have 9 stb

31 row again decrease: the first 3 loops are knitted by 1 stbn, the next 4, 5, 6 loops are knitted together with one stbn and then the last 3 loops are 1 stbn each. You must have 7 stbn

32 row, 1 stbn in each loop, as a result, 7 stbn. This was the last row of the foot. Do not cut the thread.

Dalia we tie the sides of 1 stbn. 35 stbn should come out on the side, then 1 stbn on the heel and there should be 7 stbn, the next side again 1 stbn each, as a result there should be 35 loops in the sock where the first column is done stbn. next loop pstb. the next 3 loops, one dc each, then pst and the last loop of stbn
We complete the work. You should have 78 stitches in the circle. We tear off the thread. The foot is ready (oh, sorry, when tying on the heel there should be 9 stbn).
Mark 12 points where you will decrease as shown on the slipper.

Now let's move on to the sides. We knit like this. Make a connecting loop, that is, attach the thread where you will make a strap or (I don’t know how to do it in Russian) And then we make 2 air loops and start knitting towards the heel. We hold the seamy side to you, that is, to the face.

1 row: 1 pst in each loop behind the back wall of the loop, that is, it will be a loop that is towards you, but where you have outlined, we make a decrease, i.e. 2 loops with one pst, and so in a circle, as a result, you should have 66 pst, connect with 2 air loops . Do not break the thread, continue to knit.

2 row: 2 air loops, unfold the knitting and knit 1 pst in each loop. We consider the air loops as the first pst, as a result, we connect 66 pst with 2 loops on the air column.

3 row: we make 2 air loops, Air loops are considered as the first pst. We unfold the knitting and in the first loop we make a half-column not for the loop, but for the previous column. the next loop pst and so on until the end of the row in and toga you should have 66 pst 33 of them pst for the loop and 33 pst for the front post we connect with 2 loops on the air column.

4 row: We make 2 air loops, turn the knitting and knit 1 st in each loop at the end of the row we connect with 2 loops on the air column, why the column and because every time you make 2 air loops it is considered that the first st should be 66 pst.
5 row: in this row we begin to make a strap in this row we do not turn knitting. 2 air loops. We consider the air loops as a pst, the next will be a pst for the front walls of the previous pst. farther pst for the loop and so we alternate to the place where you have the label of the strap. We make 2 air loops and turn the knitting, then we knit in the direction of the heel, 1 pst in each loop to the next point where you have planned a strap. We do not break the thread
We make 2 air loops and turn knitting 1 stitch behind the front wall of the previous stitch. 1 pst, 1 pst for fart, 1 pst, 1 pst for fart and 1 pst. It turns out 6 plst. we make 2 air loops and turn the knitting repeating from * We knit such 6 rows. We make 1 air loop and knit stbn in each loop for a total of 6 columns. We break the thread.
from the second row, knit for both loops
toe
cast on 8 stitches
1 row: in the 2nd loop from the hook your first stb, the rest of the sts to the end of the row.

2 and all subsequent rows, knit stbn, and do not forget to do air at the beginning of each row.

When you tie the length you need, tie in a circle exactly as the sole was tied, only in the corners knit 2 stbn in one loop.
This is for rounding.
I don't sew. and I knit with a connecting loop for both loops that are on the tongue and on the basis, that is, on the side.
8 loops are for all sizes, but I’ll pick the length myself, but if you want, I’ll send you the translation as in that scheme
According to the description, then you must knit 11 rows of 7 stbn and then tie as I said before.

Here are such wonderful knitted moccasins on the sole that lasievna offers to knit and shares with us a detailed master class.

So, I knit for my daughter, this is size 38, it doesn’t matter, we will follow the pattern. The yarn I have is Cotton Gold from Alize, 330 m in 100 g in two additions and one thread of Lily for strength. It turns out that I have one single crochet with a size of 5 * 5mm. I knitted tightly, hook Clover No. 3, the usual 1.5 mm metal. Whom the yarn is different in size, we go according to the pattern. Slippers are ordinary, Kislovodsk, such in Fix Price cost 50 rubles.

We cut off the fabric and pierce the sole along the edge at a distance of 5 mm in a circle along the upper edge for tying. Then we take a nylon thread (or main thread) and tie the edge of the sole. To do this, from the outside to the inside, we thread the hook into the hole, grab the thread, pull it out to make a loop.

Then we drag another loop from the adjacent hole and knit them together.

We repeat this action in a circle, we fix the thread, I just tied the beginning and end and cut it off. Then we take our yarn for moccasins and tie the sole in a circle under the resulting arches to a height of 2 cm in rows with a lifting loop. We cut the thread and hide it.

Now we measure the sole in length, at half the length we put markers on both sides. Mark the center front with a marker. We measure the widest part of the foot on the sole, take half and measure in both directions from the marker in the middle. This will be our toe. I got 9 loops (4.5 cm). We knit for the back halves of the loops (internal in our case), at the end we need to climb to the next row. To do this, we knit two connecting posts in the next two loops and turn the moccasin with the heel towards us, we knit the second row in the opposite direction. Again, in the next two loops of our side we knit 2 connecting posts, they end all rows. Knit more carefully!!! Otherwise, your moccasin will blow up to the Aurora cruiser by the end of knitting, it is better to write down each row according to the number of loops. From the third row, we begin to add loops in the front rows to expand the toe, in each first and last loop we knit two columns instead of one, in the wrong rows we knit without changes.

We knit our toe with increments to the markers, then we start the tongue. We knit 2 cm without increments (I have 4 rows), we begin to cut, I cut the loops three times on both sides through the row, that is, I cut the loops in the front rows. Then I got a tongue width of 7 cm, knitted another 3.5 cm (7 rows) without changes, close the loops, remove the thread. We tie the tongue with columns without a crochet.

We start knitting a back. We measure 3 cm from the connection of the toe with the side towards the front of the moccasins. We knit for the front halves of the loops along the tongue, then the rest of the heel for both halves of the loops in a circle around the heel (sorry for the pun), turn and knit in the opposite direction from the marker to the marker one more row. Then we decrease one loop, a single crochet, over the next two single crochets we knit 2 air loops (this is a hole for the lace), then we knit single crochets. For 4 columns before the end of the row, we knit 2 air loops, after 2 columns without a crochet, another column, we do not knit the last column for reduction. In the opposite direction, we knit all the loops with single crochets. It turned out two pairs of rows, with and without a hole. We alternate pairs so that we get 3 holes on each side, the last pair of rows - without a hole.

For the lace, I knitted a chain of 90 cm air loops, adding Italian lurex. For those who want to knit exactly according to the photo, you need to measure for the heel not 3 cm, but 1.5 cm towards the toe, the reductions are the same as in my case, only without holes. Then, on the side of the harness, we knit a row of single crochets, in the second row we leave places for holes for the lace, the third row is single crochets. At the junctions with the boot we make connecting posts. We tie the heel with a crustacean step, thread the lace. For knitting on the insole, everything is the same, only the insole is pierced from the bottom up.

Save so you don't lose.

For several seasons, the podiums have not left moccasins. Why is this happening? The answer is obvious, because these are the most comfortable and practical shoes. Of course, when choosing moccasins, you need to pay attention to a lot so that the fashionable look is in harmony with the shoes. Moccasins are very different: men's and women's, children's, made of fabric, leather, all kinds of colors and finishes. But there is a great alternative to expensive models from boutiques - do-it-yourself crochet moccasins.

History and features

The origins tell us that the first moccasins appeared in North America, they were considered the traditional shoes of the Indians.

The first moccasins of the Indians

Initially, they were sewn from the skin of animals, protecting the legs from sharp ledges of rocks, sharp cacti, bites of poisonous snakes and insects.

Moccasins are shoes with a really long history.

A little later, in the early 30s of the twentieth century, such shoes conquered the colonists with their originality and practicality, smoothly moving from the prairies to the cities.

Originally, moccasins were the shoes of the North American Indians.

With a confident step, moccasins gradually gained popularity in Europe. Fashionistas in France and Italy were the first to gladly change their tight and uncomfortable shoes, preferring incredibly comfortable moccasins.

Antique moccasins from the 30s - 50s

The first models of moccasins were completely made of leather, including the sole.

Vintage suede moccasins

Leather moccasins

Later, designers increased the practicality of such shoes with more durable rubber or polyurethane soles.

Moccasins with polyurethane soles with a small heel

Over the years, moccasins have changed a bit, plain-looking models have been replaced by bright colors, various materials, grace and elegance have been added.

Modern moccasins

The soft sole, stitching-contour and "tongue" remained unchanged.

Features of knitted patterns

The trend of the new fashion season is knitted shoes. What is their feature?

Uniqueness. Knitted shoes are a fresh fashion idea. Leather shoes do not surprise anyone, there are also a lot of fabric models. But tying shoes is a completely new look at the design of moccasins.

Knitted moccasins are comfortable and original shoes

External design. It is undeniably beautiful, elegantly unusual.

Handmade moccasins make women's legs even more attractive

Exclusive. Do-it-yourself moccasins, knitted or crocheted, always look original and exclusive.

Creative knitted loafers in the form of bunnies

Individuality. Creating such extraordinary shoes with your own hands, you can take into account all the structural features and the width of the foot, the rise and the exact size.

Handmade moccasins will surely warm and delight their owners.

Comfort. The convenience of knitted shoes lies not only in the softness of the material.

Knitted moccasins are warmth, convenience and comfort

Thanks to the knitting technique, the leg always "breathes", so moccasins can be worn not only in spring, but even in the summer heat. Knitting moccasins is not at all difficult. The main thing is self-confidence, basic knitting skills, a set of good knitting tools and successful patterns to help. Thus, you can create not just standard shoes in any style - from elegant romance to sports, but a real highlight of your individual image.

Yes, not only women love these shoes. But men also managed to appreciate the comfort and convenience of moccasins.

Knitted men's home moccasins

To knit men's moccasins, we need a good creative mood and a set of the following materials:

ready-made insoles of the appropriate size;
threads (multiple colors can be used);
knitting needles;
exact diagram.

Crochet moccasin pattern

The knitting algorithm is step-by-step, garter stitch is taken as the basis:

To begin with, 48 loops are cast on, four rows are knitted.
In the fifth row, you need to add after every fourth one more loop, for a total of 60 loops. Thus, as many rows are knitted as the depth of the slipper is planned.
Let's start knitting the heel. For this there is a scheme of loops 26 + 8 + 26. The middle eight loops are knitted at the end of each row two together until 8 loops remain.
Additional loops from the edges are recruited from the side walls. In total, 24 loops are obtained, which are knitted to the bone in about 16 (individually) rows.
The loops are reduced according to this principle: the first 8 loops are knitted as usual constantly, and the remaining 8 loops are knitted together with the loop from the side. So we knit until the middle 8 loops remain.
The final stage is recruited from the edge loops on the sides of the middle ones in such an amount as the length of the top of the moccasins is planned. The first four rows of loops are knitted, and then there is a decrease according to the already familiar principle.

This model of moccasins is distinguished by its versatility, so it is suitable for both men and women.

To give the moccasin slippers a final look, you need to tie them according to the principle of a crustacean step. Depending on the selected sole option, such moccasins can be slippers or original shoes. You can add decor in the form of a large button or metal rivets.

Men's moccasins with felt soles

When it’s already warm outside, but it’s not time for sandals yet, it’s important to keep your baby’s feet warm while walking. In this case, booties-moccasins will ideally help out. Such models of children's slippers, knitted or crocheted, are absolutely universal and will suit both boys and girls. The choice of color depends entirely on the preferences of the craftswoman.

Crochet baby moccasins

For work you will need a scheme, threads, a hook.

Crochet pattern for baby booties-ballet flats

The job description is as follows:

A chain of seven air loops is dialed. Starting from the second loop and to the end of the row, knit with a single crochet and turn the product over.
From the second to the fifth row, the description is as follows: 1 air loop is knitted with a single crochet, each time turning the product over.
Starting from the sixth row, the addition of loops begins according to this principle: one air, then two columns of b / n are knitted, and then one column of b / n to the penultimate loop. In the extreme loop of the row, two single crochets are knitted and the product is turned over.
From the seventh row to the tenth, the description is as follows: an air loop is made, after that one column b / n, and so on until the end of the row.
From the eleventh row, the algorithm of work is repeated. And only from the sixteenth row does the decrease begin: one air is typed, then one is skipped, after which it is knitted with a b / n column to the two extreme loops in the row.

Having connected the sole (two elements), we tie it with a half-column and begin to rise up. Be sure when knitting vertical elements, the hook is inserted from right to left!

Crochet process from right to left

The knitting circle begins with two air loops, is knitted with a column with two crochets on the next seven loops. Next, a simple single crochet is performed until the last eight loops. In the last 8 loops, knit one column with two crochets. In the final circle, you need to make a decrease in the loops. Since moccasin booties for babies are always bright, you can add decor in the form of ribbons, contrasting piping or colored buttons.

How to crochet baby booties

Women's summer moccasins

Incredibly fashionable, handmade moccasins will always draw attention to slender and graceful legs.

In general, there is every reason for such a creative and interesting work. For summer shoes you will need: a unique pattern, cotton yarn, a hook.

Crochet pattern for women's moccasins

The description of knitting is only for the upper part of the moccasins, so the sole must be prepared in advance. There are two schemes - a toe and a sidewall.

Mysok. First, a chain of 15 air loops is dialed. Further, according to the scheme, 12 rows are knitted.
The heel and sides of the moccasins are knitted according to the second pattern. On the upper part, one row of single crochets is made, then two single crochet and pico. This pattern is repeated as much as necessary according to the unique sizes of moccasins.
Assembly. First, the toe and side parts of the slippers are sewn according to the scheme, and then they are all sewn together to the sole. For a special elegance and grace, it is better to choose a ready-made knitted sole.

Very soft and comfortable handmade knitted loafers

Hand-knitted moccasins are always stylish and original.

Soft and comfortable knitted loafers-slippers - relaxation for women's legs

We must not forget about the financial side of the issue, since the exclusive created by oneself is not only more effective than store models, but also much cheaper.

You can knit not only for yourself. Original moccasins will be a great gift for a loved one. Knitting booties for your baby is not only beautiful. Mom passes on a particle of her soul during creative work, giving the child all her love.

Crochet women's moccasins

Nobody will dispute the popularity of knitted shoes. From year to year it does not go out of fashion. And there are reasons for that.

If earlier our grandmothers knitted only socks, and a little later knitted shoes were purely homemade knitted shoes, then today in such shoes and in a feast and in the world ...

Every year more and more opportunities and materials are provided for creating beautiful knitted shoes, in which you really are not ashamed to appear in public.

If earlier craftswomen used old boring shoes as the basis for knitting shoes, today the choice of soles is very diverse. And how much yarn!

The insoles in the shoes were purchased from the store.

Nadezhda is very pleased with the moccasins. Knitted shoes are comfortable and light.

Many thanks to Nadezhda for allowing me to show her work on my website. By the way, here you can see Severyuzhka's knitted handbags. Cool ones like that.

Note to needlewomen:

How to choose the sole for knitted shoes

We measure the length of the foot.

To the length of the foot, we add the thickness of the material for making shoes, multiplied by 2. The resulting amount will correspond to the size of the sole.

Yarn "Linen"

A linen product shrinks quite a bit when washed, but when worn, it returns to its original size. Comfortable in both hot and cold weather.

At Nadezhda Severyukhina has its own shop at the Fair of Masters livemaster.ru/severushka