Sew a round hat for Little Red Riding Hood. New Year's costume of Little Red Riding Hood (photo). How to make a Little Red Riding Hood costume with your own hands

A holiday in kindergarten or school is always an important event for girls. They want to prepare the dress and jewelry in advance. Nowadays, almost all mothers go to the store to buy a ready-made outfit, without thinking that they can make it themselves. Sewing a Little Red Riding Hood costume with your own hands for a child is not as difficult as it might seem. Moreover, if this is done on the basis of a white dress from the “Snowflake” costume, left over from last New Year.

Sewing a Little Red Riding Hood costume

To make a New Year's costume, all you need to do is choose a master class that offers simple patterns.

Girl's outfit

To make a Little Red Riding Hood costume for a girl do it yourself you will need the following materials:

Red satin. A skirt and a hat will be made from it.
White satin for making an apron.
White lace.
Concealed zipper or elastic band.
Sequins.
Adhesive interlining.
Dark fabric to make a vest.
Two laces.

If there is no white dress, then you will need to sew or take a white blouse from another suit. The pattern is easy to pick up in the Burda magazine. To make a blouse you will need white satin 150 cm wide.

Made from red satin sew a half-sun skirt. If you have a white dress for the base, then a red skirt can be sewn on top of it. To do this, you need to rip off the bottom of the dress, and then sew it on again, but this time along with the red skirt. You won't need a petticoat.

In the absence of a ready-made white dress, a children's Little Red Riding Hood costume is sewn from scratch. In this case, a wide belt is sewn to the red skirt and an elastic band is threaded through it. This is if you choose the simple method.

For a more complex option, you need to sew a belt to the skirt at the waist and glue it with non-woven fabric. Here you will need a hidden zipper, located on the side. Decorate the bottom of the skirt with sequins, 5 cm from the edge. Decorations can be sewn on using a sewing machine.

The petticoat is made of tulle. The width of the fabric should be three times the circumference of the hips, then gather it on a satin belt.

To sew an apron, you will need a piece of white satin measuring 20 cm in length and 23 cm in width. This rectangle has two corners rounded. Trim the edges with lace, neatly folded . Lace will need approximately twice the perimeter, to which it is sewn. Next, cut out the ties for the belt on the bias and sew them to the apron, slightly gathered into folds.

To ensure that the lace lies well and does not curl, it is recommended to stitch the apron, 2 cm from the edge.

Red satin is used to make the headdress. The red riding hood pattern for the costume consists of two parts. The back piece is single, rectangular in shape with two rounded corners. The height of the part is equal to the distance from the base of the head to the crown. The pattern of the front part is also in the form of a rectangle. It should be double, glued with non-woven fabric. The width of the rectangle is equal to the distance from the top of the head to the forehead, excluding the lapel. For the lapel, it is enough to leave a reserve of 4-5 cm of fabric.

The front part of the cap is sewn to the back part, to its three sides. Therefore, the length of the front part should be equal to the sum of the lengths of the three sides of the back part.

To make the front part double, you need to fold its parts right side inward and sew them together. Then turn it inside out, iron it and stitch about 5 mm from the edge.

The front part of the hat is sewn to the back part, and the edges are finished with a zigzag. The remaining raw bottom edge of the back piece needs to be folded up and stitched.

On the Internet you can find visual diagrams of how to sew a cap for Little Red Riding Hood; there are different patterns for this accessory. The headdress can be crocheted. You need to sew strings to the cap or pin it to your hair using bobby pins.

A carnival costume will look original if you wear a vest. You can easily find its pattern in any fashion magazine. Brown spandex is suitable for making a vest. The fastener can be sewn in the form of air loops, then lacing can be done. Decorate the finished item with sequins.

The costume is ready, you can complement the look with white tights, beautiful shoes and a basket.

Halloween costume

You can sew a Little Red Riding Hood outfit for a girl. Here it is enough to copy the children's version, but make the sizes for an adult. Or change the pattern a little to emphasize the shape. Elements of a Halloween costume can include:

The blouse or dress should have a deep neckline and puffy sleeves. The skirt can be made fuller by trimming it with narrow strips of organza. A simple hat will do, for example, with ears sticking out to the sides. It is advisable to fill the basket with fruits or sweets.

You can make a suitable costume for any event.

Attention, TODAY only!

A holiday in kindergarten or school is an important event for a daughter. She prepares for it in advance and responsibly as an adult. The girl chooses a costume, jewelry and accessories. Most often, modern mothers began to buy ready-made outfits in stores, completely unaware that most of them can be sewn at home. It is enough to choose a suitable master class with simple patterns, which, for example, are offered for sewing a Little Red Riding Hood costume for a girl with your own hands today.

DIY hats for Little Red Riding Hood costume for girls

There are several types of headdresses available for the Little Red Riding Hood costume. They differ in the shape of the cut and the method of attachment to the child's head. The color of the cap remains unchanged - red. It is advisable to use a material that is soft, light and pleasant to the touch. For example, satin or cotton.

Materials and tools: red fabric, scissors, tailor's yardstick, chalk, sewing machine, matching threads.

Option #1

Stage 1

The girl's head circumference is measured. A piece of fabric is purchased using these measurements. Add 10 cm to the length and 4 cm to the height of the cap.

Stage 2

The rectangular cut is sewn on the sides, as in the picture above.

Stage 3

On one side you need to tighten the material. To do this, it is enough to lay a straight line with a stitch length of 3 or 4. After which you need to pull the thread that passed from below - the fabric will tighten. You can leave a small hole if your daughter has a long ponytail, which can be pulled out through this hole to make her hair more beautiful.

Stage 4

On the opposite side of the hole for the ponytail on the side of the face, a fold is made on the fabric. It is hemmed. The material can be folded twice.

Stage 5

And when finishing the work on the side of the face, the fabric is turned out slightly at an angle from the inside out. So we got the first version of the headdress of the Little Red Riding Hood costume for a girl with our own hands.

Option No. 2

This option is different from the previous one. The pattern shape has been changed. The assembly technique is complicated. The model stands out with lace decorations.

For the headdress, only medium-density fabric is used. The adhesive material (non-woven fabric) is installed inside. The handbag is treated with a thick layer of interlining fabric. The height is 12 cm with the width of one side being 8 cm.

It is advisable to insert a wire into the upper part. It will keep the desired shape of the scarf.

Option No. 3

This option is similar to the English bonnet. It’s as easy to sew as the first version of the headdress for the Little Red Riding Hood costume with your own hands.

For the pattern you need to know the circumference from the top to the girl's chin. ¾ of this length is used. The horizontal circumference is also measured. ¼ of this length is used. The resulting figure will be equal to the width of the top side along the fold line. The circumference of the bottom is done at your discretion. However, this figure should not be less than 1/3 of the head circumference.

Fabric parts are cut out using patterns. The top is being assembled. Folds are placed on the textile. You can pin them together with pins. At the very bottom there will be a drawstring and elastic band.

Lace is sewn along the edge of the product, but it is not necessary. You can simply turn the fabric to the outside.

The top is sewn in double thickness. A fold along the edge is required. The bottom does not need to be sealed with a double layer.

Option No. 4

The simplest pattern. Even a young girl who knows how to use a needle can sew such a hat.

DIY Little Red Riding Hood costume for a girl

A carnival costume consists of four elements: a blouse, a skirt, a corset, an apron and a cap. Options for hats were discussed in detail above. The pattern is designed for a girl of kindergarten age.

Materials and tools: tracing paper, white fabric for a blouse and apron, red fabric for a skirt, elastic band, scissors, chalk, tailor's yardstick, pencil, sewing machine, pins, matching threads, rope, awl, lace for a corset.

Stage 1

A paper pattern is made according to the specified parameters.

Stage 2

Fabric parts are cut out using patterns.

Stage 3

The blouse is being cut. The neckline and bottom of the sleeves are processed. It is advisable to make this element of the costume loose, not fitted.

Stage 4

The apron pattern is simple. It is a product in the form of a semicircle. It is advisable to decorate the bottom of the apron with gathered braid. The assemblies can be done independently by machine or by hand. The braid is simply strung on the thread like an accordion and sewn to the indicated place.

Stage 5

Belt. Its width is 5 cm excluding allowances. You can cut a rectangular fabric with a width of 12 cm, fold it in half, fold the edges 1 cm and sew it onto the apron, and then insert an elastic band. The elastic is inserted as desired.

Stage 6

The skirt represents half the circumference of the sun. No paper pattern is required.

The fabric is laid out on the table in double fold. Pick up a string, chalk and a meter. A rope is attached to the center of the upper edge of the fabric, and chalk is tied to the end. Knowing the measurements indicated in the picture, two circles are drawn. Two pieces are cut out for the skirt of the Little Red Riding Hood costume for a girl with your own hands.

The skirt is sewn at the sides, folded at the waist and an elastic band is inserted.

Stage 7

The technique of making a corset is more complicated. This item of clothing is sewn from satin fabric. The sides are connected at the chest using a lace.

The corset is cut in the same way as the skirt, from satin fabric. To make working with fabric easier, you can make the product two-layer and mirrored.

No pattern required. You need a rectangular piece of material, as in the picture. There will be only one cut. Its edges are processed. If the fabric is two-layer, then the edges are folded inward and one line is laid.

Holes are pierced along the edges for the lace. Requires 5 holes on each side. It is recommended to mark circles on the fabric with chalk, sew them on a sewing machine and only then pierce them with an awl. A cord is threaded crosswise into the holes.

Thin strips for the straps are cut from the fabric. If desired, you can make straps from ribbon or braid of a suitable color.

The Little Red Riding Hood costume for a girl is ready with her own hands. The costume comes with a small basket of pies!

Also find out...

For a child to grow strong and dexterous, he needs this
How to look 10 years younger than your age
How to get rid of expression lines
How to remove cellulite forever
How to lose weight quickly without dieting or fitness

Little Red Riding Hood, beloved by everyone since childhood, can decorate your home too! She has a cute lace apron, a pretty face and pretty shoes. Why not sew such a doll with your own hands?

The process of making it is not very difficult. Even a novice craftsman can make our Little Red Riding Hood. Of course, you will need to sew a lot of different parts - the body, clothes, boots and even a hat. But even more interesting! Moreover, each individual part is not difficult to manufacture.

In order to sew a doll with your own hands, you will need:

flesh-colored felt for the girl’s head and body;
some brown felt for the vest and shoes
yarn for hair, a piece of white fabric for an apron
some colored fabric for the dress, lace for trim
thick bright red fabric for a hat.

You can't do without scissors, pins, threads and needles. Also stock up on a small amount of padding polyester and fabric markers.

So let's begin! We do everything step by step, trying to make even, neat stitches. But don’t be discouraged if everything doesn’t work out right away! A little practice - and your dolls will be amazing.

To get started, download and print the patterns of all the parts of the doll and its clothes. Pin the patterns onto the fabric, draw lines with chalk, taking into account the indentations for the seams. After that, cut out all the parts and stack them so that they are already at hand.

Head

The head is the most important part of the doll! Take two pieces of the pink felt head and carefully sew them together.

Turn the head inside out and sew the ears.

Stuff the head with fiberfill and close the hole with a seam over the edge.

Now is the most crucial moment: we need to make Little Red Riding Hood’s eyes. If you feel strong enough, you can draw them yourself, with special markers, on white cotton fabric, cut them out and then glue them on your face. You can also buy eyes from craft stores or use black buttons lined with white felt.

Embroider the mouth with thick red thread. The face is ready!

Body

Sew the body along the side lines. Turn it inside out, fill it with padding polyester and insert a small wooden or plastic stick inside for stability.

After this, sew the leg pieces along the front line.

Turn them inside out. Now you can sew on the soles. Don't worry if it doesn't turn out very neatly: the doll will also put on shoes! If you put thick paper in the soles, the doll will stand more stable. After that, sew the handles. If you want the handles to bend, then insert wire into them.

Twist the ends of the wire with duct tape (for safety).

Mark the middle at the bottom of the body using a thick thread.

Sew the legs to the bottom of the body.

Attach the handles with wire. After that, sew along the shoulder line.

Insert the end of the stick into the head, sew the neck using a fairly thick thread. Take some light brown or tan colored yarn. Divide into two bundles as shown in the picture.

One bun will be used to form bangs, so it will be a little shorter on one side. Sew the hair to the top of the head.

Make a straight seam in the middle. You can simply glue the hair at the back.

Petticoat and pantaloons

Now it would be nice to sew our Little Red Riding Hood a beautiful petticoat and pantaloons. Knickers are sewn very simply: they consist of two rectangles. Sew lace to the bottom of the rectangles. Fold the rectangles and make two seams from point A to point B (as in the picture).

Place the future panties so that the seam is at the top, in the middle. Now we will make two seams from point B to points C.

Insert an elastic band or elastic thread at the top and bottom. Now the doll has lace pants!

The underskirt is very easy to sew, the main thing is not to forget about the seam allowance and sew on the lace. The length of the skirt is approximately 8-10 centimeters.

To sew an elegant dress, you will have to work hard.

First we sew the shoulder and side lines.

Let's cut the fabric a little in the armpit area so that the dress fits better.

Now gather the skirt and sew it to the waistband. Turn inside out, finish the seams and add lace to the collar. You can make buttons on the back.

Boots

To make boots, cut out the sole and the main part of the shoe from thick felt. Punch holes for the laces.

Sew the sole to the shoe. Here you will have to try to ensure that the seams are extremely even! Insert the laces (about 20 centimeters).

We put our boots on the doll!

You can always sew a children's Little Red Riding Hood carnival costume with your own hands, even if your sewing experience is minimal. In our master class, we focused on the details and got an elegant costume in which the child looks like a doll. The calculation is presented for a child 3-4 years old; accordingly, for girls younger or older, less or more material will be used.

To sew a Little Red Riding Hood costume with your own hands, you will need:

— tulle 1.5 m red;

— crepe satin or red satin 1-1.5 m;

— white crepsatine 0.5-1 m;

— thick satin or artificial leather in black 30 cm;

- threads to match the color of the fabric;

— bias binding 15m red;

— satin ribbon 5cm wide in white and black;

- white and black lace;

— satin ribbons and decorative elements in red and gold;

- elastic band 1.5 cm and 0.5 cm thick;

- adhesive dense fabric such as dublerin or a base for the collars of men's shirts.

How to sew a Little Red Riding Hood costume: job description

Cutting out a children's Little Red Riding Hood costume

Let's start with tulle. Our petticoat will be 30cm long. Therefore, we cut out 5 strips with a width of 30 cm and a length of 1.5 m along the piece of fabric. The total length of the petticoat without assembly will be 7.5 m.

Then let's move on to the red satin. A real Little Red Riding Hood simply cannot exist without a fluffy red skirt. Therefore, the costume will consist of a fluffy flared skirt. To do this, fold the fabric in half along the grain and mark a semicircle with a radius of 40 cm with a piece of soap or chalk. And one more - with a radius of 10-12cm. The centers of both circles lie at the same point.

We will also need a belt for the skirt and petticoat. These will be 2 rectangles measuring 80x8cm.

Now let's move on to the most important accessory of Little Red Riding Hood's carnival costume, in fact, the cap itself. It should be in the spirit of the time, i.e. with a large lapel and small lace around the edges.

The cut of our hat will be very simple. This is a rectangle measuring 40x25 cm and a drop of 12x7 cm. The sizes are presented for a child with a head volume of 47-48 cm.

Now the corset. The corset should be 5 cm less than the length of the child’s waist in order for the lacing to look beautiful. The corset will be slightly higher in front.

We cut out an apron from white crepe satin.

We will also make the blouse from white crepe satin. In order not to bother with the pattern, we take the base from a blouse that fits the child. I just increased the size of the shoulder so as to create pleats in front and behind. We make a fastener on the back.

(left - front, middle - sleeve, right - back)

Sewing and assembling a Little Red Riding Hood costume for a girl

Let's start with the petticoat. Sew all 5 parts of the cut together. Then we finish one edge with bias tape.

Then we reduce the thread tension to zero and make the maximum stitch pitch. In this mode, we make a line to assemble the petticoat, then carefully pull one thread and assemble the petticoat.

The already assembled petticoat will remain sewn to the belt. Insert the rubber band and you're done.

Let's start with the skirt. Before starting work, I heat-treated the outer and inner edges of the skirt. Then we process the outer contour with bias tape. It is better to sew bias tape with a decorative stitch.

We sew the belt.

Now we proceed to finishing with gold ribbon and white lace.

That's it, the skirt for the Little Red Riding Hood costume is ready.

The hat is the most important attribute of the costume, so it should look beautiful and elegant; I sewed lace on three sides of the rectangle.

Then we sew the remaining side of the rectangle to the “droplet”. Turn it inside out and finish the edge. This is what should happen.

We also heat-treat the apron, turn up the edge and sew on the lace.

We make the belt for the apron and ties from satin ribbon.

We start sewing the blouse in a classic way - from the shoulder seams. We lay the folds, sew and finish the seams.

We sew the sleeves along the side seam and gather them at the shoulder.

We turn up the bottom of the sleeve and sew on the lace.

We sew in the sleeves. We finish the neckline with bias tape and lace. The blouse is ready, all that remains is to insert the elastic bands into the sleeves and sew on the decor.

We sew a corset. Glue the adhesive fabric to one part of the corset. Then we sew both parts of the corset and turn them inside out. We sew lace along the front side with a decorative seam.