Pullover with openwork leaves. Jumper with embossed "leaves. Openwork pattern "leaves"

in this article we will consider the patterns and the process of knitting all kinds of knitted leaves. An openwork or voluminous leaf pattern will look great on a knitted coat or cardigan, hat or scarf, pullover or poncho.

harmoniously and effectively decorate not only knitted clothes, but also blankets, bedspreads and pillow covers that needlewomen knit for the home.

Having mastered knitting openwork or voluminous leafy patterns with knitting needles, needlewomen will be able to decorate with them a variety of types of clothing, as well as accessories and household items.

- although this pattern requires a diagram, and sometimes a detailed description of knitting, it is a fairly simple pattern. Even beginner knitters can master it.

"Oak Leaves"

Pattern repeat - twenty-eight pieces horizontally, thirteen - vertically.

The diagram contains blue cells. They don't count. To the required number of loops per pattern (according to the sample), we add two edge loops. The diagram shows both front and back rows, the calculation of loops on them and symbols.

Openwork pattern "leaves"

Report 18 loops and 18 rows. Please note that the scheme contains both front and back rows. Odd - purl, even - facial. Also note that the rows are listed from left to right.

Knitted leaves with knitting needles: openwork pattern for 11 rows

The report includes 12 loops. The diagram shows ONLY the front rows. Purl knit according to the pattern.

The pattern requires eleven rows in height. Next is the repetition of the pattern from the first to the eleventh row.

Knitted leaves with knitting needles: embossed branch

Knitted leaves with knitting needles: braid pattern with leaves

The rapport is equal to 16 loops. During work, the number of loops from row to row will vary.

Knitted leaves with knitting needles: the pattern is repeated from 1-26 rows. The purl rows are knitted according to the pattern.

We also have a good one, perhaps it will be interesting and useful to you.

Description of knitting sweater:

The sweater in the lesson will be knitted in sizes 42-48. At the same time, for size 42, the sweater will sit loose, and for size 48, it will fit the figure.

To knit a sweater you will need:

• - You will need 500 g of angora yarn: 60% acrylic, 40% mohair, yardage 500 meters in 100 grams.
• - Needles: 4.5mm-5.5mm.
• - Scissors, measuring tape, sewing needle.
• - Stitch markers. Instead of markers, you can use regular paper clips.

Knitting pattern for a sweater with a leaf pattern

We knit with a thread in two additions. We will divide the work on knitting a sweater into several parts: Sleeves, back, front. After knitting all the details, assembly is performed.

We will start the work by knitting the fabrics of the sleeves. In the sleeves, first we knit rows of elastic. And then proceed to the implementation of the main pattern.

A detailed description of the knitting of one repeat pattern of a branch with leaves in the sleeves is shown in the video.

Knitting the fabric of the back also begins to knit with an elastic band. After that, the loops are distributed and two rapports of the main pattern are knitted to the neckline. The front fabric is knitted similarly to the back, but with a deeper V-neck.

When all the details are connected, we will show you how to assemble the details of this knitted sweater into a finished product. During assembly, shoulder and side seams are performed. The sleeves of the sweater are sewn in and sewn together. After the assembly is completed, it is necessary to tie the V-shaped neckline.

Video of knitting a sweater with a leaf pattern

Sweater video part 1: In the first part of the video you will link with the master of the sleeve. It is shown in detail and step by step for beginners the knitting of an elastic band in the sleeves and the formation of a rapport pattern in the sleeve.

Knitting a sweater part 2 video: The second part shows the knitting of the front and back of the sweater. As well as the process of assembling the product and tying the sweater after assembly:

In the second part, you will tie all the other parts of the sweater in the video and assemble it.

Photo of a knitted sweater from different angles

White color, openwork leaves on the sleeves and pockets - this cute jacket is pleasant to wear and knit.

Dimensions: 38(40)42(44)

Finished product dimensions: bust -88(96)103(110) cm, total length - 55(56)57(58) cm.

You will need: Sandnes duo yarn (55% wool, 45% cotton, 124 m / 50 g) - 300 (300) 350 (350) g ​​natural white, circular knitting needles No. 3 and 3, 5, 7 buttons.

Knitting density: 22 sts in satin stitch on needles No. 3.5 = 10 cm.

Wrong surface: persons. rows - out. p., out. rows of persons. P.

Garter stitch: persons. and out. rows - persons. P.

Front and back: Cast on 191(207) 223(239) sts on circular needle #3 and work 5 rows in garter st. Change the needles to number 3.5 and knit 8 cm with the wrong side. Fasten on both edges with 1 mark thread, 47 (51) 55 (59) sts on each shelf and 95 (103) 111 (119) sts on the back. To fit, decrease the loops next. way: knit 2 sts after the first mark thread, 1 person. p., 2 persons. n. together. Decrease loops in the same way from the other edge. Repeat dec every 4 cm a total of 3 times = 179(195)211(227) sts. At 24 cm inc inc 1 st on both sides of the marking thread. Repeat inc every 4 cm 3 times total = 191(207)223(239 ) p. At a height of 36 cm from the set row, decrease the loops for the armhole of the sleeve: knit 46 (50) 54 (58) p., close 3 p., knit 93 (101) 109 (117) p., close 3 p., Knit 46(50)54(58) sts. Further, knit all the details separately.

Back: dec on both sides for armhole every 2nd row 3,2,2,1,1,1 (4,2,2,1,1,1)4,3,2,1,1,1(4, 3,2,2,1,1) p. = 73(79)85(91) p. 6.6(6,7,7)7,7,8(8,8,8) sts. Set aside the remaining 39(39)41(43) sts on an auxiliary needle for the neck.

Before: dec sts along the edge of the armhole as on the back = 36(39)42(45) sts. auxiliary needle. Bind off at the edge of the neck on every 2nd row 4,2,2,1,1,1 sts. Bevel the shoulder in the same way and at the same height as on the back. Tie the second shelf in a mirror image.

Sleeves: Cast on 83(83)97(97) sts on needles #3 and knit 2. row. Change the needles to No. 3.5 and knit according to scheme 1, knitting the sleeves at the same time (knit 2 sts together at the beginning and at the end of the row). Knit the pattern according to the scheme to the end and close the remaining loops.

Assembly: complete the shoulder seams.

Shelf planks: remove the loops along the edge of the left shelf on the knitting needles No. 3 (3 sts for every 4 rows). Work 7 rows in 1 x 1 Rib. Close the loops. Knit the strap on the right buttock in the same way, knitting 7 loops for buttons in the 4th row at the same distance.

A loop: close 2 p., dial them again in the next. row.

Neck strap: slip along the edge of the neckline on needles No. 3 about 139 (139) 143 (147) p. And knit 7 rows with an elastic band 1 × 1. Attention! On the 4th row, knit a loop for a button.

Pocket: cast on 19 sts on needles No. 3.5 and knit with openwork knitting according to scheme 2. Then knit 6 rows with an elastic band 1 × 1. Close the loops, tie the bottom of the jacket and the edges of the pocket with crochet 1 next to st. 6/n. Sew on the sleeves. Sew on buttons and pockets.

Dimensions

36/38 (40/42 – 44/46)

You will need

Yarn (100% wool; 95 m / 50 g) - 600 (650–700) g mustard yellow; knitting needles number 5; circular knitting needles No. 5, 40 cm long; 1 auxiliary needle; beads, sequins with a diameter of 6 mm and 15 mm and glass beads with a length of 12 mm and 30 mm.

Patterns and schemes

Garter stitch

Knitting in rows in forward and reverse directions: front and back rows - front loops.

Knitting in a circle: alternately 1 p. facial loops, 1 p. purl loops.

Pattern "Leaves"

Knit according to the above scheme in rows in the forward and reverse directions. Read front rows from right to left. In the wrong rows not shown in the diagram, knit the loops according to the pattern, unless otherwise indicated.

In width on the loops of the scheme, knit 1 time.

In height from the 1st to the 42nd river. perform 1 time, then from the 15th to the 42nd p. repeat 3 times, then perform 1 time from the 15th to the 40th p., while in the last rapport, starting from the 27th p., do not start a new motive, but knit on the middle 5 p. (= 2 out ., 1 p. remove, 2 out.) and increase (= knit 1 out. crossed loop from the broach). On the loops between them, knit with a garter stitch.

Attention!

In the 40th p. (= purl row) Knit 3 sts together with a tilt to the left not from the purl, but from the front. Knit 3 p. together with a tilt to the left: remove 1 p., as in knitting, knit 2 p. together with the front one, then stretch the removed loop through the knitted ones.

Knitting density

17 p. x 32 p. = 10 x 10 cm, knitted in garter stitch with needles No. 5;
from the 23rd to the 37th p. of the “Leaves” pattern = 13 cm, knitted with knitting needles No. 5.

Pattern

Completing of the work

Back

On needles No. 5, dial 81 (87–93) sts with a double thread and then knit for the lower bar with a single thread in garter stitch, starting with the front row.

After 2.5 cm = 8 p. from the beginning of the garter stitch, continue the work by distributing the loops of the patterns as follows: chrome, 14 (16–18) sts of garter stitch, 23 sts of the “Leaves” pattern, 5 (7–9) sts of garter stitch, 23 sts of the pattern “Leaves”, 14 (16–18) sts of garter stitch, chrome.

After 26 cm = 84 p. from the typesetting row, make on both sides for the armholes along the mark and continue working as before (see also the description of the “Leaves” pattern in height).

After 48 (49–50) cm = 154 (156–160) p. from the typesetting row, close on both sides for the shoulder bevels, first 4 (6–8) p., then in each 2nd p. 6 more times 4 p. = 25 (27–29) p.

Simultaneously with the 4th shoulder decrease, leave the middle 19 (21–23) sts for the neckline and finish both sides separately.

To round the neck, close from the inner edge in every 2nd p. 1 time 2 p. and 1 time 1 p. (all loops are closed).

Before

Knit like a back, but for a deeper neck, lower the last two motifs in the Leaves pattern in the middle and after 46 (47–48) cm = 148 (150–154) p. temporarily leave the middle 15 (17-19) p.

Finish both sides separately and, to round the neck, close from the inner edge in each 2nd p. 1 time 2 p. and 3 times 1 p.

Shoulder bevel to perform as on the back.

Finish the other side symmetrically.

Sleeves

On needles No. 5, dial 44 (48–52) sts with a double thread and then knit with a single thread in garter stitch, starting from the front row.

In the 8th r. from the typesetting row, add on both sides for bevels, first 1 p., then in each 8th p. 14 more times 1 p. = 74 (78–82) p.

After 44 (45–46) cm = 140 (144–148) p. from the set row, close all the loops in one row.

Knit the second sleeve in the same way.

Assembly

Prick the details on the pattern, moisten and leave to dry.

Run shoulder seams.

On circular knitting needles No. 5, transfer the left 19 (21–23) p. garter stitch inlay and after 3 cm = 9 p. close loops.

Run the side seams to the marks. Sew the seams of the sleeves. Sew on the sleeves. Fasten the ends of the threads.

Before the pullover, embroider with beads, glass beads and sequins, as in the photo or arbitrarily.

Photo: Burda magazine. Knitting" №1/2017

Here, similar sweaters were knitted on the aspen, there are a lot of useful things in the comments
http://club.osinka.ru/topic-158418?start=105

Here is a video with a detailed analysis of knitting leaves

Leaf scheme with video

Here is a video with knitting such a sweater - size 46, lanagold yarn classic

Well, now, let's proceed to the selection of yarn and calculations.
As I see it, this sweater can be knitted from a variety of yarns, the main thing is to knit a sample and calculate everything for your yarn, knitting needles and knitting density.

When calculating the number of sweaters needed for this, I started from the information in this post, where the girl already knitted such a sweater http://www.stranamam.ru/post/12192503/

So, there was yarn 50g - 225 m, in two threads, consumption 14 skeins (700 grams).
Thus, with a footage of 100 g - 225 m, the total length of the thread is 1575 meters.
Based on this calculation, it is possibleapproximatelyestimate how much we need yarn of various sizes:
footage 100 g - 175 m (knitting in 1 thread), 50 g - 175 m (knitting in 2 threads) - total 900 g of yarn
footage 100 g - 200 m (knitting in 1 thread), 50 g - 200 m (knitting in 2 threads) - only 800 g of yarn
footage 100 g - 225 m (knitting in 1 thread), 50 g - 225 m (knitting in 2 threads) - only 700 g of yarn
footage 100 g - 250 m (knitting in 1 thread), 50 g - 250 m (knitting in 2 threads) - only 650 g of yarn
footage 100 g - 275 m (knitting in 1 thread), 50 g - 275 m (knitting in 2 threads) - only 600 g of yarn
footage 100 g - 300 m (knitting in 1 thread), 50 g - 300 m (knitting in 2 threads) - only 600 g of yarn
footage 100 g - 450 m (knitting in 2 threads) - total 750 g of yarn

For this sweater I bought Superlambs Special Nako yarn (49% wool 51% acrylic), 100 g - 200 m, color like this, 181.


Now calculations

Pictured above is my drawing.these are the measurements of the girl the sweater is knitted on, size 40-42.
The bottom picture is already in cm, what the sweater should be, according to my calculations...

I want to make the elastic tighter so that it holds a little bit of the sweater and it is slouchy a little on top. I added 5 cm for the overlap. I calculated the width of the canvas as follows: chest volume + 20% + 2 cm for stitching.
As for the neck, I'm not sure yet, we'll look at the course of knitting.

Now we knit a sample. Girls, I highly recommend doing this! This will help you avoid unnecessary work. Yes, maybe laziness, you don’t want to wait until you tie it, until it dries ... but take pity on yourself and your work!

My sample


After we have washed the sample, we steam it (if the yarn allows) and now you can take measurements. I took measurements in a fixed form, as in the photo, that is, I stretched it a little. I was probably lucky with the yarn, because the sample sizes are the same before and after the second.

Further, my calculations of the loops, based on the size of the sample and measurements.

Well, now you can get started!

At the bottom I will have a 2 * 2 rubber band, then a leaf pattern on a branch of 3 facial loops, the leaves will be parallel to each other, I think that it will be possible to accommodate 3 pairs of leaves. Knitting needles for gum No. 4, for the main fabric No. 5

Based on the available patterns, and knitting in the video above, I made a leaf pattern, slightly increasing it. In the diagram, only the front rows, the wrong ones are knitted according to the pattern. The second leaf is knitted in a mirror.


Here is my start. Having connected one rapport of the leaves, I measured it, everything agrees with my calculations, so I knit further


I immediately knitted one report, after finishing the leaf I began to knit the second, but it seemed to me that they were too widely spaced. Therefore, I began to knit the second leaflet on the 33rd row of the scheme (the one that I drew with a pen). As a result, it turned out that in the photo, I liked it so much length 27 cm.


Here it is ready before!
I closed the neck according to the scheme below. Since the neck will be tied with an elastic band, then its depth is suitable, well, as I think



I closed the neck of the back in the same way, only I made the closing of the loops not so deep, but higher.

I immediately made the sleeve with a straight canvas, without expansion, but it didn’t look very nice, and it was cramped. So I made an extension.

For the sleeve, I cast on 32 loops and knitted with an elastic band for 13 rows. Then we add loops up to 45 (27 - rapport, purl 9 on the sides). And knit three leaves.
And when the fourth sheet begins, its first row, this will be the first row in the following increase scheme:

We make increases on both sides (near the edge) in the following rows - 3,7,11,15,19,23,27,31,35,37,39,41. In total, we knit 45 rows and close the loops.

My next step was WTO. I washed the parts of the sweater in cold water with shampoo, let the excess water drain and dried on a flat surface. Then I steamed all the parts, especially the edges, because they will need to be sewn together.

Having sewn the two halves of the shoulders on top, I began to tie the neck.


Here are links to very beautiful and neat necks, excellent MK