Crochet flowers for beginners. Crochet small flowers: a bouquet of threads. Bulk crochet flower for beginners

Knitting flowers is a very exciting and enjoyable activity, and each flower is sure to be used as a decoration for a blouse, handbag, hat or a surprise for a girlfriend. Here is a collection of small miniature crocheted flowers with a detailed description and knitting patterns.

A flower with multi-layered petals.

Description of crochet flower:

At the beginning of knitting, we form an initial ring from the thread and knit into the ring 1st row:* Art. b / n, half-column, repeat 5 times, then tighten the ring well and fix the end of the thread. 2nd row: we knit arches for the first row of petals, for this we knit *st.b / n for a column in the first row, an arch of 3 air loops, we also repeat 5 times, finish the row with a connecting loop in the first table. 3rd row: from each arch, knit a half-column, 3 st s / n, half-column, between the arches make st b / n. 4th row: we knit arches for the next row of petals from 5 air loops, fixing them by knitting st b / n for the leg of st. b / n of the previous row (as a relief concave st b / n). 5th row we knit the petals from the arches by knitting a half-column, 5 st s / n, a half-column, between the arches st b / n. Next, knit according to the scheme, increasing the number of loops in the arches and tying them with a large number of s / n columns.

Crochet flower pattern:

It is worth noting that the use of different types of yarn gives its effect when knitting a flower. For example, from a thin woolen thread we get a fluffy soft flower, when knitting flowers from cotton, clear contours of the petals stand out, and mercerized cotton adds extra shine.

Description of knitting flowers:

In the initial ring, knit 3 lifting air loops and 19 double crochets, then pull the ring and fasten the thread, make a connecting loop in the 3rd air. lifting loop. Then cut and fasten the thread for knitting the second row or make 2 air. loops and then start knitting 2nd row, knitting again * in the initial ring st. b / n, arch of 4 air loops, art. b / n in the initial ring through 4 columns of the first row, repeat from 5 times, finish the row with a connecting loop in the first column. 3rd row: knit the petals by knitting a half-column from the arches, 5 sts s / n, a half-column, st b / n between the arches. 4th row: we knit arches from 5 air loops, fastening from st. b / n per leg st. b / n of the previous row. 5th row: we knit petals from arches: half-column, 9 sts s / n, half-column, st b / n between the arches.

Crochet flower pattern:

Knitted flowers acquire a complete image with an additional decoration with a leaf, curlicue, bead.

In this flower model, the number of petals increases, while fixing each next row of arches with st. b / n for the previous arches evenly adding one more arch.

Crochet flower pattern:

Flat flowers with wavy petals.

A beautiful wave to the petals gives a large number of art. s / n knitted from each arch.

Crochet flower:

Little flowers:

Knit in the initial ring 5 tbsp. b / n, through one air loop, pull off the ring, make a connecting loop in the first column and knit the petals: * 3 air. loops, 2 st s / n from air. loops of the previous row, 3 air. loops, connecting loop in the next column, repeat from * 5 times. In the last row we make a strapping st b / n, 4 air. loops, st. s / n to the top of the petal, st b / n at the base (you can make a strapping with a thread of a different color).

Tiny little flowers look beautiful in large numbers from different shades of yarn.

In the initial ring, knit 3 air. lifting loops instead of the 1st tbsp. s / n, 2 air. loops, then knit 5 st s / n, after 2 air loops, pull off the ring and make a connecting column into the 3rd lifting loop. Next, knit the petals from the arches: * 3 air loops, 2 st s / n, 3 air loops, fasten them with a connecting loop, then knit a connecting column from the next arch and repeat from * to the end of the row.

Bulk crochet flower.

Make 5 air loops and close them into a ring, knit st. b / n, * dial 10 air. loops, st b / n. into the ring, then tie an arch of 10 loops of the 10th st b / n. When finished tying, turn the work and knit the next st b / n in the initial ring, while the resulting petal is slightly twisted. Then repeat from * 5 more times. Having finished the first row of petals, knit arches of 14 air loops, fastening them with st b / n between the previous petals, in the next row make a strapping of the formed arches.

Sew on flowers decorating the core with a bead.

Flowers with divided petals.

Crocheted flowers are beautiful decorative elements that can decorate hairpins, women's handbags or summer sundresses. There are a lot of knitting options. This article will help you decide how to crochet flowers. Schemes and descriptions will help you easily understand this needlework process. Knitting requires very little - a little yarn, a hook, a detailed description, and even better - a little imagination.

Legend:

St / b / n - single crochet;

St / s / n - double crochet;

V.p. - air loop.

Master class number 1. We knit a flower with petals

Crocheted flowers are beautiful products that can be simple or voluminous. In this tutorial, we will look at how to create a simple flower with five triangular petals. By adding the number of loops, you can make the flower more voluminous.

1. We make the first loop, after which we perform 4 ch. We close in a ring with a connecting loop.
2. We carry out the rise, ch 3, 2 unfinished st / s / n to the center of the circle, we knit together.
3. We make a pico of three air loops.
4. Three air loops and st / s / n, we reduce everything to the center of the circle. One petal is ready.
5. Similarly, we perform the 4 remaining flowers.

This is an easy way to crochet flowers for beginners.

Master class number 2. Bulk crochet flower

We perform 4 vp, which are closed in a ring. We knit five arches of three air loops into the ring: lifting loop, ch 2, after which we perform 5 st / s / n into the ring. We complete the work with a connecting loop in the first lifting loop. We got 5 arches. Now you need to tie the next row, which consists of bags, or corn kernels. To do this, we perform st / w / n under the arch, three air loops, under the arch we make five st / s / n. We turn the work, insert the hook into the first st / s / n and connect. So we got the so-called corn grain. Now we perform 3 vp, which we connect with the arch. Crochet voluminous flowers are created in this way.

Now we do the following:

1. Lift loop, create an arch of three air loops.
2. We tilt the knob forward a little and connect the loops with the single crochets that we performed earlier.
3. We take the same sequence of actions for the rest of the corn grains.
4. The next row is a lifting loop, st / b / n under the arch, 5 air loops.
5. On the arch we create a bump from the columns, which are knitted with two crochets: we need 5 of them according to the number of grains.
6. We turn the work, insert the hook into the first column with two crochets and tighten.
7. We perform 5 air loops and fasten into the same arch.

Our original three-dimensional flower is ready!

Master class number 3: Flowers with bumps in the center

We collect 5 air loops, which we close in a ring. Lifting loop, we carry out in the ring 14 st / b / n. Crocheting flowers in this way is quite simple. The second row is the bumps. Lift loop, 4 air loops, 5 tbsp. with two crochets in the same loop. We turn the work, after which we insert a hook into the top of the first column and create a connecting loop - the bump is ready. We fix it on the ring. We skip two columns, enter the hook into the third - this is important, since these two empty columns will be useful to us later. At the end of the work, we insert the hook into the lifting loop and make a connecting loop. A number of cones is ready.

The third row is the petals. They will be created in place of the two missing columns. We bend the bump, insert a hook into the column and perform st / b / n. Now you need to create 4 ch, at the same point - two columns with two crochets, 2 tbsp. with two crochets, we perform in an adjacent free column. In the same column we make 4 air loops and st / b / n. We have the first petal. The rest we do in place of the missed columns. The row ends with the introduction of a hook into the first single crochet, after which we connect the loops. The flower is ready!

Master class number 4: We knit the simplest flowers

To do this, we need to tie 5 air loops that close into a ring. One lifting loop and 4 air loops. We do 3 tbsp. with three crochets in a ring. We do 4 ch. and attach them to the base. Our first petal is ready. By analogy, we create a few more petals. If you are looking for how to crochet a flower in the easiest way, then this option is just right for you. The following version of simple knitting involves the stages of work:

• 5 air loops are closed in a ring;
• 3 air lifting loops;
• arch of three air loops;
• we perform three st / s / n;
• 3 air loops;
• we perform three st / s / n;
• 6 petals are made in total.

It was the first row. The second row is the petals. We carry out three air loops, under the arch we knit a half-column and 5 st / s / n, 1 half-column and st / b / n. So we created the first petal. In the same way we create the rest of the petals. We will get a neat and dense flower, the center of which can be decorated with a bead.

The third option is small crochet flowers, patterns for which are not needed. We create 5 air loops, we create a ring based on them. Now we knit one air loop, connect the loops with a ring, perform 9 st / b / n. We complete the row by connecting to the center. The second row is the petals: 1 air loop for lifting, in a column in the previous row we knit 5 tbsp. with 2 crochets. We fasten the petal with a single crochet. In the same way we create four more petals.

Master class number 5: Flowers for openwork lace

5 air loops close in a circle. We carry out one loop for lifting and into the ring - 9 st / b / n. We complete the row with a connecting column in the first lifting loop. Second row: one lifting loop, 4 air loops, 1 tbsp. with three crochets in the same base loop. On the next column we knit 3 tbsp. with three crochets, repeat this with the adjacent column. We knit 4 air loops and fasten them into the same loop of st / b / n. So we created the first petal. The rest of the petals are created in the same way. We carry out 4 air loops and fasten them to the lifting loop. These crocheted flowers allow you to create a whole canvas that looks like lace.

Master class number 6: We knit a chamomile with a voluminous middle

1. We close 3 air loops in a ring.
2. Lift loop, 2 air loops are fixed into the ring with a single crochet. It turned out an arch - we need only 5 of these.
3. The next row - under the arch we perform st / b / n, 4 air loops, we knit three columns with two crochets with a common top under the same arch. One loop should remain from the column. 4 loops remain on the hook, which are knitted together. 4 air loops, fasten them with a single crochet under the arch. We repeat throughout the row.
4. We perform a lifting loop, three air loops that form an arch. We introduce the hook into the single crochet of the previous row and create a single crochet again. 3 air loops, 2 st / b / n. To make it more convenient to work, the petals should be tilted a little - it will be easier to work.
5. The next row is the petals of the central part. We carry out the rise, 4 air loops, 3 tbsp. with two crochets with a common top. We knit all the columns together. Under the arch we knit 1 st / b / n, 4 air loops and under the arch we again knit three columns with two crochets with a common top. Thus, we have created the central part of our future flower. By the way, such crochet flowers are suitable for decorating hats.
6. To create the next row, we need a contrasting thread, take a white one. First, we attach it to the yellow thread, we collect three air loops, we fasten them with a single crochet. We bend the petal, perform two columns, collect 3 air loops, again a column for fixing. The row of white arches is completed.
7. We got the arches that we need to knit the last row of petals: one lifting loop, 5 air loops, under the arch we create 4 columns with three crochets - they remain unfinished. We create five such columns, after which we connect the left crochets. Again 5 vp, which we fix to the arch, knitting 2 st / b / n.

For greater beauty, the flower can be decorated with a strapping. To do this, another row is performed: under the arch we perform 3 st / b / n from 5 air loops, one half-column, three st / s / n - all under one arch. At the top of the knitted columns we create three st / s / n. Here we knit another column - the top is ready. Now we create an arch - 4 st / s / n, half-column, 3 st / s / n. Thus, we are preparing the strapping of the first petal. It turns out a beautiful flower, it remains to tie the rest of the petals. Our decorative element will immediately become brighter and more beautiful.

Master class number 7: We knit a double-sided flower

We collect 8 air loops and close them in a ring. Now we create 3 air loops, st / s / n, picot of 11 air loops - this will become the basis of our petal. We knit another st / s / n, and one more - above it we perform 11 air loops for pico. Crocheted flower patterns are quite simple, and even a beginner can handle this process. We knit two st / s / n, and above the third we create a pico - there should be 6 of them. This completes the first row. Second row: 1 air loop, we tie all 11 loops of our pico with a double crochet, we knit three st / s / n at the top of the flower. We fix the petal in the next column. Thus we tie all the petals.

Third row: tying the petals with yarn of a different color. First we create an air loop, in the next column we knit a half-column, in the next - 1 half-column and 1 st / s / n, then - 1 st / s / n and so on to the end. The top of the petal will be higher, so here we knit 3 st / b / n at once. When we reach the bottom of the flower, we do the following: we pull the loop through the base of the flower, grab the working thread and pull it out, but do not pull it together. We knit a neat loop. We carry out the binding of the remaining petals in the same way.

Master class number 8: Flowers from individual petals

As always, we make 5 air loops and close them in a ring. We perform 4 air loops and 4 more air loops, after which we create 1 tbsp. with two crochets, create a circle. We turn the work over and perform an air loop under the arch, then 1 st / b / n, then a pico of three air loops, a half-column and another pico of three loops. We turn the work again, perform 5 st / s / n on the front side. We fix the first petal and attach it to the base with a connecting loop.

Now we create 4 air loops, we knit 1 tbsp. with two crochets - they will become the basis for the second petal. Such crochet flowers look very airy and beautiful. The master class will help you in creating such beauty. Individual flowers can be created from threads of different colors to make the final composition bright and beautiful.

Knitted flowers are widely represented on various Internet sites. But most of the beautiful flowers are crocheted. We have compiled a small selection of knitted flowers that are interesting in our opinion.

knitted flowers can be used to decorate almost any knitted item: hats, bags, scarves, tops, dresses, baby blankets, T-shirts, etc. You can also make beautiful compositions from knitted flowers - panels, or put them in a vase, pot. Flowers, though not alive, but they will add zest to your interior.

Knitted flowers are widely used in women's accessories. From flowers you can make earrings, a necklace or an unusual hairpin, brooch.

If you have a photo or description of beautiful knitted flowers, send it to our website. We will publish them for sure.

Knitted flowers, schemes from the Internet.

MK from Irina Chernysheva for knitting a flower

interesting selection on the site 20 models for adults, without children

Openwork knitted flowers from Victoria Babkina

The flowers that will be discussed are so simple that even a child can handle them! Some 5 minutes and the flower is ready! You can decorate with them both interior items and personal items, and use them in the manufacture of clothes for dolls and other toys. We will need: a pair of knitting needles, yarn, scissors (the size of the flower directly depends on the yarn you choose).

Knitted rose flower

Flower spokes needle chrysanthemum

Simple flower knitting from a hollow cord

Video tutorial on knitting a hollow cord:

Knit a hollow cord with knitting needles of a suitable size (65-70 rows).

Divide the cord into 5 equal parts, fold it in the shape of petals, pull the needle and thread through the center and collect the flower.

Cut the thread and fasten off. The flower with knitting needles is ready!

Knitted flower knitting rose:

Cast on 20 sts.
1st p. (IR): out. loops
2nd row: *1 person., yarn over, *, finish 1 person.
3, 5th p.: out. n. (knit yarns out. crossed).
4, 6th p .: * 1 person., nakid *, you will finish 1 person.
7th row: close 8 out., * 1 long loop 1 row below, knit it together with the next. p. out. p. and close it, close 7 out; rep. from * 5 times, * 1 long p. 1 row below, knit this one together out. from the next p. and close it, close 10 out; rep, from * 3 times, * 1 long p. 1 row below, knit this together out. from the next p. and close it, close 13 out; rep. from * to the end.

Purple knitted flower with knitting needles:

Cast on 12 stitches.
Row. 1: slip 1, knit 11 facial.
Row. 2: remove 1, knit 11 purl.
Row. 3: slip 1 and knit pattern *1 front loop, 1 yarn over*
Row. 4: slip 1, purl.
Continue knitting in stockinette stitch until
petal length and width of your choice.
Then start knitting together 2 loops on each side of each 2nd row.
Link the number of petals you have chosen. On this sample - 6.
Sew all the petals together, fastening in the center and decorate with buttons or beads.

Knitted flower knitting poppy:

Crochet a ring of 4 ch, tie 6 sts into it without a crochet, then 2 columns in each loop, total 12, cast on knitting needles along the edge (short, for knitting socks, circular is not very convenient)
1 row - facial
2 row - knit 3 from each loop
3 row - facial
4 row - knit 3 from each loop
5 row - facial
6 row - knit 3 from each loop
then 3 rows of facial and if more, how much is needed to achieve the desired size
close loops

Knitted flower with mohair knitting needles:

We start knitting a petal from 2 balls (we knit each part separately). On one knitting needle, dial 3 sts from each ball.
Row 1: (1 st, add 1 st, 1 st, add 1 st, 1 st) she is the first 3 sts from the first ball, then the same on the loops from the second ball.
Row 2: 5 and 5 pi
Row 3: (1 st, add 1 st, 3 sts, add 1 st, 1 st) she is the first 3 sts from the first ball, then the same on the loops from the second ball. (it came out 7 and 7 p.)
Row 4: We connect both parts of knitting.
6 PI, 2 p. together out., 6 PI
Row 5: 1 st, inc 1 st, 11 sts, inc 1 st, 1 st
Rows 6, 8, 10,12, 14
Row 7: K6, K3 together (middle top), K6
Row 9: RL 5, knit 3 together (middle top), RL 5
Row 11: K2 sts together with tilt to the left, 2 LP, 3 sts together knit (middle top), 2 LP, 2 sts knit together
Row 13: Knit 2 sts together with tilt to the left, knit 3 sts together (middle top), knit 2 sts together
Remove for extra knitting needle and knit 3 more such petals.
Then collect all 4 petals on one knitting needle, purl 1 row, then collect all the stitches on the thread, tighten and fasten.
Translation from julia_kh from Osinka.

Knitted flowers with knitting needles. Schemes from our site

Knitted flower cornflower

To knit a flower, you will need: dark blue, bright blue and blue wool yarn and knitting needles.

Knitted flower knitting stockrose

To knit a flower, you will need: dark pink and light pink cotton yarn, stocking needles No. 4.

Knitted rose flowers in 15 minutes

Knitted flower rose bud

Rose is the queen of flowers. This is probably why there are many different variations on the theme of knitted roses, not only crocheted but also knitted. Our flower collection contains the most roses. Here is another description of how to tie a rose in a bud. A chic brooch can be made from a single flower or bouquet.

Knitted flowers video tutorials

For those who do not like to knit according to patterns and descriptions, there are video tutorials on the Internet.

The video should load here, please wait or refresh the page.

How to knit voluminous flowers with knitting needles

Hi all. Glad to welcome you to my channel. Today we will learn how to knit charming flowers with knitting needles. With such flowers, in the future, you can decorate any knitted product. This will allow you to make it more interesting.

The video should load here, please wait or refresh the page.

Simple flower knitting

The video should load here, please wait or refresh the page.

For those who know how to knit not only with knitting needles, but also with a crochet, we present a large selection of knitted flowers on the site.

Separately, see the digest of crocheted flowers in pots.

Crocheting is becoming an increasingly popular hobby. The wardrobe and the house of the needlewoman and her relatives are filled with beautiful, original things. Lacy, unusual and exclusive products become a source of pride and excellent gifts.

As in any other process of creating something with your own hands, the level of craftsmanship in crochet increases with the increase in the number of crafts. Experienced needlewomen demonstrate real works of art made from magic loops. At the same time, no matter how much beginners learn to knit, they would not immediately want to portray something as grandiose, the best option for honing their skills would be knitting small decorative elements, such as flowers.

Despite the fact that knitting them is quite simple, the flowers are a great decoration. They make beautiful brooches, hairpins, with these products you can decorate a scarf or dress, give zest to even the most ordinary hat or bag.

Step-by-step master classes will help beginners in needlework create their own masterpiece.

A very simple little flower.

1. Dial a chain of 3 air. loops.
2. First row. in the ring tie 3 air. lifting loops (instead of 1 double crochet), 2 air. loops, * 1 tbsp. with a crochet, 2 air. loops * repeat from * to * 4 more times.
3. In each arch of 2 air. tie loops (3 air loops + 2 double crochets + 3 air loops) knit 1 connecting column between the petals.

Pretty flower with eight petals.

Fasten and cut the thread. The flower is ready.

Another simple flower.

1. Link 4 air. loops.
2. Tie them into a ring with a connecting post.
3. First row, knit in a ring. Knit 3 air. lifting loops, * 3 air. loops, 1 tbsp. with a crochet * knit from * to * 6 times. It turned out 7 tbsp. with a crochet after 3 air. loops, finish with a connecting column.
4. Second row. Knit 8 arches out of 17 air. loops, fixing them with 2 tbsp. without a crochet knitted into an arch of 3 air. loops of the previous row.
5. Third row. In each arch, knit 8 half-columns + 1 air. loop + 1 st. with a crochet + 1 air. loop + 1 st. with a crochet + 1 air. loop + 1 st. with a crochet + 1 air. loop + 8 half-columns. Between the arches knit 1 tbsp. without a crochet.

The flower is ready.

Flower with lush petals.

1. Link a chain of 6 air. loops.
2. Lock it into a ring with a connecting post.
3. First row. 1 air. lifting loop, 12 tbsp. without a crochet in the ring. Finish the row with a connecting post.
4. Second row. Knit 6 arches from 3 air. loops, fixing them with 1 tbsp. single crochet through 1 loop of the previous row.
5. Third row. knit in each arch (5 air loops + 1 lush column + 5 air loops), knit 1 connecting column between the petals.

Lush column knit as follows: start as with a regular double crochet (double crochet, pull out a loop) knit 2 loops (2 loops on the hook), repeat the yarn over and pull out the loop, knit 2 loops (now there are 3 loops on the hook), in the same way knit 3 more unfinished columns (6 loops on the hook). Knit 5 loops. Knit the remaining 2 loops.

Another master class Making it more complex layered flower.

Embossed concave column knit with a crochet as follows: make a crochet, insert the hook from right to left under the loop of the double crochet of the previous row so that the “body” of the column is behind the hook, pull out the loop, then knit like a regular double crochet.