How to sew a hat from a knitted sweater. We sew a stylish hat from an old sweater

Helpful Hints

The time has come when we all start to warm up and pull sweaters out of the closet.

But if you notice that your old sweater has lost its former brightness, no longer suits you, or is out of fashion, do not rush to throw it away.

Instead, try using it to make a variety of things, from hats and scarves to throws and pillowcases.

See also: Hand-knitted scarf in 30 minutes and other snood scarves

hat from an old sweater

This hat is very easy to make and takes about 10 minutes.

1. You will need: an old sweater, scissors and an old hat you usually wear to measure your size.

2. Cut the bottom half of the sweater to your desired length.

3. Cut this part of the sweater along the seam.

4. Use an old hat to measure the right size and cut off the unnecessary.

5. Fold the resulting part into 3-4 layers.

6. Cut out the arc at the top.

7. Sew the two edges of the hat.

8. Sew the top arcs.

9. Cut off the excess along the seam, turn over and the hat is ready!

Here is a video instruction on how to make such a hat from an old sweater.

DIY decorative pillows from a sweater

Turn the sweater inside out. Put a pillow over your sweater.

Cut a square or rectangle from the sweater, leaving a seam allowance. Sew together the sides of the pillowcase, leaving room for the pillow to slip through. Turn out the pillowcase.

Thread a pillow through your sweater pillowcase and sew up the open opening by hand.

· Decorate as desired. To do this, you can use buttons or flowers from the remaining fabric of the sweater.

Mitts for beginners

These mitts are very comfortable to use your smartphone in winter.

From chrome For the sweater, cut a rectangle 30 cm high and 20 cm long. Cut along the seam so you have two pieces.

Fold both pieces lengthwise right side inward. Mark a hole about 6 cm wide for the thumb with pins, stepping back 5 cm from the edge.

· Then sew, leaving a hole for the thumb and making a hem at the bottom.

Plaid from old sweaters

If you have a lot of old sweaters, you can make a plaid out of them that will keep you warm on cold winter evenings.

· Cut the sweaters into square pieces and sort them by color. Arrange them randomly.

Sew the squares using the sewing machine. You can do this gradually, sewing two parts, then 4, and then connecting larger pieces.

· When all the pieces have been sewn, you can cut out the lining, for example from flannel, the same size as the front of the quilt.

Sew the edges of the blanket with buttonhole stitch.

Do-it-yourself mittens from an old sweater

It is easy to make warm mittens from an old sweater. One trick: when you make a mitten pattern, your thumb should be slightly to the side so that your mittens are comfortable.

Just sew the cut out parts, and the mittens are ready.

How to change a sweater? Pet bed

This comfortable bed will become your cat's favorite place.

DIY bag from a sweater

In order to make this handy bag you will need an old sweater, scissors and thread.

· Make bag handles by cutting off the sleeves and neck of the sweater.

· Lay the fabric so that the side seams are in front.

· Pin the bottom of the sweater right sides inward and sew to connect both sides.

· Turn the bag inside out.

If you want to make the handles more durable, fold each handle and sew.

Knitted leggings

These leggings are very easy to make from an old sweater. All you need to do is cut off the sleeves from the sweater and hem the edges, and you're done with fashionable and warm leggings. You can wear them under boots to protect your tights from fraying.

Clothes for a dog from an old sweater

Dress for a girl from an old sweater

To sew such a dress for a girl, you will need a children's dress, according to the model of which you can make a new one.

Lay it over the sweater and cut off at neckline, remembering to add seam allowances.

Cut off the top corners.

In the closet of each of us there is, if not a couple of skeletons, then certainly a certain amount of clothes that you will never wear and it is a pity to throw it away. Oddly enough, sweaters take the palm in the ranking of unnecessary / unfashionable / moth-eaten things. If you also found such a character on the mezzanine or in the depths of the wardrobe, but for sentimental reasons you cannot send him to the trash can, give things a second chance. Turn an old sweater into a cute trendy hat.

Actual beanie hat, made by own hands, can become a favorite accessory this spring. Or a nice gift for girlfriends on March 8th. If you have enough sweaters and an hour of free time. By the way, the ability to hold a needle and thread in your hands is not required at all in this case. And here, what you need, so this:

1. An old sweater (preferably with an elastic band at the bottom);
2.Glue gun;
3. Measuring tape or tape measure;
4. A scarf for visual measurement (although a “centimeter” can be used for the same purpose);
5.Sharp scissors;
6. Marker or chalk.

1. Tie a scarf around your head, fix so that it is comfortable: not tight, but not too loose.

2. Remove the scarf without untying it and attach it to the elastic band/edge of the sweater. The length of the scarf from hem to knot will be the width of your hat.

3. Attach a measuring tape to the middle of the scarf and measure the height of the future hat. Rely on your taste or take measurements from your favorite hat of a similar design. The average height of beanie hats is in the range of 24-29 cm.

4. Draw the shape of the future accessory. Do not be afraid to stain the fabric with a marker - as a result, the measurements will not be noticeable at all.

5. And now - cut. The main thing is to grab both layers of tissue at the same time. Because scissors must be really well sharpened.

6. After the two halves are ready, take the glue gun and connect them, gluing along the very edge, as shown in the photo. Do not forget to leave the bottom unglued, otherwise you will not be able to put on the hat.

7. After the hat has already begun to resemble a hat, it's time to take up the scissors again and trim its top a little. This step is necessary so that the beanie sits better, and does not resemble the “cockerel” familiar to many since the happy childhood.

8. Fold the hat, as in the photo below, and glue the edges of the formed “eight”.

In the closet of each of us there is, if not a couple of skeletons, then certainly a certain amount of clothes that you will never wear and it’s a pity to throw it away. Oddly enough, sweaters take the palm in the ranking of unnecessary / unfashionable / moth-eaten things. If you also found such a character on the mezzanine or in the depths of the wardrobe, but for sentimental reasons you cannot send him to the trash can, give things a second chance. Turn an old sweater into a cute trendy hat.

A trendy DIY beanie may be your favorite accessory this fall. Or a nice gift for friends. If you have enough sweaters and an hour of free time. By the way, the ability to hold a needle and thread in your hands is not required at all in this case. And here's what you need is:

1. An old sweater (preferably with an elastic band at the bottom);
2. Glue gun;
3. Measuring tape or tape measure;
4. A scarf for visual measurement (although a “centimeter” can be used for the same purpose);
5. Sharp scissors;
6. Marker or chalk.

1. Tie a scarf around your head, fix it so that it is comfortable: not tight, but not too loose.

2. Remove the scarf without untying it and attach it to the elastic band/edge of the sweater. The length of the scarf from hem to knot will be the width of your hat.

3. Attach the measuring tape to the middle of the scarf and measure the height of the future hat. Rely on your taste or take measurements from your favorite hat of a similar design. The average height of beanie hats is in the range of 24-29 cm.

4. Draw the shape of the future accessory. Do not be afraid to stain the fabric with a marker - as a result, the measurements will not be noticeable at all.

5. Now, cut. The main thing is to grab both layers of tissue at the same time. Because scissors must be really well sharpened.

6. After the two halves are ready, take a glue gun and connect them, gluing along the very edge, as shown in the photo. Do not forget to leave the bottom unglued, otherwise you will not be able to put on the hat.

7. After the hat has already begun to resemble a hat, it's time to take up the scissors again and trim the top a little. This step is necessary so that the beanie sits better, and does not resemble the “cockerel” familiar to many since the happy childhood.

8. Fold the hat, as in the photo below, and glue the edges of the formed “eight”.

The method of converting a sweater into a warm skirt is quite popular, but frankly, such a thing is far from being for everyone, since thick fabric visually enlarges the hips. We propose to make more practical things out of an old sweater - a hat and mittens.

Some simply cut out two parts of the hat from the fabric of the sweater and sew it together, but this is wrong, since the shape of the hat will look ugly. The neatest hat, sitting exactly on the head, is obtained from 3 or 5 petals. This applies to both male and female models.

1. Cut off the sleeves from the sweater and set aside, now you only need the breast and back.

2. Cut out 5 petals from the main canvas. To determine the width of the petal, measure the circumference of the head with a centimeter and divide these numbers by 5, add 1-1.5 cm on each side for allowances.

The length of the petal depends on the model: if the hat should sit tightly on the head, then the petal is equal to the length from the eyebrow to the middle of the crown. If you want an elongated model like a beanie hat, then the length of the part should be 10-15 cm longer.

3. Sew all the petals together on a typewriter. Inside, it is better to process the seams with a zigzag so that the threads do not fall.

4. The final step is sewing on the elastic band. If you cut out the details for the hat in the middle of the canvas, then the edge you get is raw, so you need to sew a strip of elastic there, which will be a border. If you cut the petals right up to the bottom of the sweater, that is, along with the bottom finished edge, then you do not need this step.

So, cut out a strip of fabric from the sweater with a length equal to the girth of your head, 6-5 cm wide, sew it into a circle. We bend the edges and, as it were, wrap the bottom edge of the cap with this strip. We sew with a zigzag.

That's all, with the help of such a simple sequence of actions, you can sew a hat from an old sweater with your own hands. The work takes from 30 minutes to 1 hour.

Sweater mittens: master class

So, the main part of the sweater went to sewing a hat, but the sleeves remained. Therefore, you can make excellent mittens from a sweater. To do this, you still need a lining fabric, such as fleece - then your mittens will be very warm.

1. Cut off the cuffs from the sleeves and open the seam. Cut out all the details of the pattern in 4 pieces: 2 from the main fabric and 2 from the fleece.

VERY IMPORTANT: for parts 1 and 2 - you need to cut 4 pieces as shown in the pattern, and 4 pieces in a mirror image.

2. Fold the two pieces of the inside of the mitten right sides together and sew the thumb area (the sides do not need to be sewn).

It should turn out like this:

3. Attach the upper part of the mitten to this part (right sides to each other) and sew along the perimeter except for the side where the arm will enter.

4. Do the same for the second mitten and for the details of the lining. You should have 4 mittens: two from the main fabric and 2 from the lining. Do not forget that lining mittens are sewn with seams inside.

Slide the lining mitten into the main one so that all the seams are inside.

5. From above, right side down to the edge of the mitten, sew the previously cut cuff.

6. Now it's time to see how the mitten turned out from the sweater - we turn the product inside out.

Now wrap the cuff and sew a button on top.

We hope that the sweater hat and mittens will delight you for a long time! So do not throw away old sweaters, but rather give them a second life!

Nobody wears them anymore, and it's a pity to throw them away. Common situation?

If you are planning to sort out your wardrobe, this does not mean at all that your old sweater, which has already served its purpose, should be thrown away. If you love knitwear, you can ennoble your home and yourself for the cold season, creating warmth and comfort around you. And it's all thanks to your sweater.

I bring to your attention 10 wonderful ideas that will make you feel like a kind of magician. Choose the "transformation" that you like!

1. Cute hat

From one or more old sweaters - for example, those that children will no longer wear because they have grown out of them, you can make warm hats for the winter.

You can also use additional fabrics to insulate or shape your new hat.

From a warm sweater, you can get 2 options for a winter headdress.

Put a hat of the desired size on the sweater, circle the outline (including seams). Sew the 2 pieces of the hat on a sewing machine or by hand.

Or this hat is very easy to make, and it will take about 10 minutes.

The sewing algorithm is simple:

1. You will need: an old sweater, scissors and an old hat you usually wear to measure your size.
2. Cut the bottom half of the sweater to your desired length.
3. Cut this part of the sweater along the seam.
4. Use an old hat to measure the right size and cut off the unnecessary.
5. Fold the resulting part into 3-4 layers.

6. Cut out the arc at the top.
7. Sew the two edges of the hat.
8. Sew the top arcs.
9. Cut off the excess along the seam, turn over and the hat is ready!

Here is a similar video instruction, but instead of using a glue gun, we will not glue, but sew the seams.

2. Warm mittens or mitts

All you need is a sweater, scissors, needles and thread (or a sewing machine).

Cut the mittens so that you can use the "gum" (the bottom of the sweater). Before cutting, take measurements from your hand or take the mitten of the person for whom you are making new mittens. Now you just have to sew the parts of the mittens from the inside out and turn them on the front side. Ready!

Do you want to have mittens made by your own hands in a matter of minutes?

Follow the next steps in the photo and read the instructions below to make sweater mittens:

. Prepare the sweater: A wool sweater works best for this idea (at least 80% wool, but 100% is preferred). Wash the sweater in lukewarm water, then dry it on a hot battery to keep the wool fibers tangled together so they don't fall apart when you cut. Your sweater will shrink significantly after drying. Hint: Wash your sweater in a mesh bag to avoid clogging the washing machine with wool fibers.

. turn out sweater inside out and lay it on the table. Place your hand on one of the side edges of the sweater and trace the shape of the mitten around it. Add about an inch around the perimeter to secure the seam. Don't forget to leave the bottom part for the cuffs.

. Cut out along your contour mitten.

. Fasten front and back layers with a few pins around the edges.

. Sew: Thread the floss needle and make simple stitches along your outline. Make sure the bottom of the mitten is wide enough for your hand to fit easily. Remove excess fabric. Be careful not to cut too close to the stitching as it may fall apart.

. Now the fun part! Turn the mitt inside out to see the finished handmade product.

. Decorate: Use buttons, colorful threads, and other embellishments to make the mitten even more interesting.

. Repeat all steps on the opposite side of the sweater for the other mitten.

It is even easier to make warm mitts:

These mitts are very comfortable to use your smartphone in the winter.

From the edge of the sweater, cut a rectangle 30 cm high and 20 cm long. Cut along the seam so you have two pieces.

Fold both pieces lengthwise right side inward. Mark a hole about 6 cm wide for the thumb with pins, stepping back 5 cm from the edge.
Then sew, leaving a hole for the thumb and making a hem at the bottom.

Or like this:

Cut out the cuff from the sleeve.
Determine your preferred glove finger length. Add about 2 cm to this length and cut off the sweater sleeve.
Secure the sleeve opening on the sewing machine with a zigzag stitch or overlock stitch.
Wrap the ends into the sleeve by 2 cm and sew with a needle and thread.
Put on a glove on your hand and determine the right place for the thumb hole. Cut where you want the hole to be. Carefully unravel the seam until the hole is a comfortable size for your thumb. Then secure the hole with a thread with a needle so that the threads do not continue to unravel.
Since the sleeves are a little looser than the gloves should be, you need to reduce the diameter a bit. To do this, put gloves on your hands, pinch the excess fabric along the length of the sleeve, secure with a few pins.
Take off your gloves. Secure by hand the trim and seam with a needle and thread, using a reverse stitch.

3. Elegant lampshade

Any sweater can be used for the lampshade, but if you want an original and beautiful decor, then it is better to look for something cute among unnecessary things.

Next, you need to pull the sweater over the lampshade and cut off the excess material at the top. At the same time, leave about 3-4 cm of material to fold over and glue the edge with hot glue along the top of the lampshade. Just a sight!

Or make something like this:

4. Gift box

Your autumn or winter gift can become soft and cozy! Cut out strips of fabric from an old sweater and make a stylish package of your own. You can use yarn for decoration (boubon, fringe). Or you can wrap the whole box and make a bow at the top. I want bright ideas!

5. Christmas wreath on the door

Warm greetings to everyone!
As a basis for a wreath, you can take a circle made of straw. And you will also need: a sweater (red, green or shiny is better for the New Year), a glue gun and decor.
Cut the seam of the sweater sleeve to wrap the sleeve around the wreath part. Glue the material at the seam and cut off the excess fabric. Take the rest of the fabric and finish the next section of the wreath in the same way. When the wreath is finished with fabric, add the desired decoration (letters, sparkles, cones, etc.).

6. Sweater for your favorite dog

For small dogs, you can only use the sleeve of a sweater, but make sure the dog will fit in it before you get started.

You can make a tank top or a three-quarter sleeve sweater. Your dog will look stylish and will not freeze on a walk or in a cold house.

Simple dog overalls

Before you decide to sew clothes for your pet, you need to accurately take measurements. This is done according to the scheme. Overalls for dogs do not require a large number of measurements. You only need to know the distance from the middle of the neck to the tail and the length of the limbs.

Well, if you decide to precisely fit the clothes to the size of the pet, then you will need to take more measurements: neck circumference, chest volume (at the level behind the elbows), the length of the hind and forelimbs, the distance from the neck to the tail, and also from the bottom of the neck to the navel. All measurements must be done with your own hands using a special tape with millimeter divisions.

Explanation of values:
A - neck girth;
B - distance from the middle of the neck to the tail;
C is the distance between the hind and fore limbs;
D - length from the collar to the edge of the sleeve;
E - chest girth behind the elbows;
F - girth of the hind limb in the widest part;
G - girth of the forelimb in the widest part;
H - girth of the muzzle.

Elementary pattern:

In order to make a pattern, you should determine the size from the neck to the tail of the dog, then divide it into eight parts. One part will become the cage of your circuit. Further on the cells, it will be possible to draw the details of the product, which will subsequently need to be transferred to the fabric of the sweater.

7. Cozy flowerpots, mugs

This is an easy way to decorate plastic pots. For example, an idea for the finishing touch when decorating a house at the last minute for a holiday party.

Sweater sleeves are suitable for decorating flowerpots. Measure the height of your pot and cut off part of the sleeve, leaving about 4 cm of margin. Put the fabric over the flower pot and finish the edges if necessary (sew, glue, etc.)

A simple but interesting touch to your interior:

By the same principle, you can dress vases, mugs, etc. in winter clothes.

8. Pet bed

We made a pillow for ourselves - take care of your four-legged friend too. Sewing a couch from an old sweater is probably even easier than a regular pillow.
To do this, simply insert a pillow into the sweater itself (preferably a dense one so that it does not sag under the weight of the animal), stuff the sleeves tightly with any fabric material, fasten them together so that they frame the resulting base and act as a side. Everything, the couch is ready.

If you are not strong in needlework, it will most likely not turn out to be very even, but believe me, your pet will be grateful to you anyway, especially since this bed will smell like you, and pets really appreciate things with the smell of the owner.

Want to be more precise?

1. Sew the neck of the sweater inside out and sew the sweater at the height of the cutouts
for sleeves to make a single side.
2. Fill the side with holofiber, padding polyester or other material.
3. Sew the cuffs of the sleeves together.
4. Inside the rest of the sweater, put a round pillow and connect everything with the sleeves.

Comfortable couch in front of you!

9. Pillows-"dumki"

One way to decide the fate of an old sweater is to sew decorative pillows on the sofa from it. Thus, those who do not know how to knit at all will have the opportunity to decorate their home with unusual knitted products.
To make pillows look more original, choose solid-colored sweaters with intricate knitting patterns, braids, "bumps", or sweaters with Scandinavian patterns on a white background.

First of all, consider an old sweater. Does it match in color to the design of the room, is it combined with existing accessories. The sweater should not be too worn, otherwise it will not turn out to be a beautiful, neat new thing. As a last resort, we use only well-preserved parts of it.

Attach the pillow to the sweater and mark the correct size.

We cut off the upper part of the sweater with a neck and sleeves and cut out a pillow cover of the size we need.
Sew the sides and top.

On the bottom, you can make a button fastener or just sew it up after the pillow is put into the cover.

It takes a minimum of cutting and sewing, but such pillows will delight the eye for a long time and create a warm and welcoming atmosphere in the house.
You can decorate them as you wish with buttons, flowers, or other decorations.

10. Plaid

In order to make a blanket with your own hands, collect all the woolen sweaters in the house. I think that every housewife will find things that have not been worn for a long time, but still have a very decent look and can serve as excellent material for a future blanket. Think about what color scheme you would like your plaid to be. For my plaid, I used about 10 sweaters in blue, gray and cream. But more can be used. I bought some of my sweaters on sale and they cost me only $1, you can also go to second-hand stores where they sell quite good quality items at a reasonable price. Ask your friends, they might be happy to give you their unwanted woolen clothes!

Pre-prepare your sweaters: open the seams, remove buttons, buttons, zippers. Sort fabrics by color and wash separately by color to prevent fading.
Put your sweaters in an old pillowcase to keep wool fluff from clogging the washing machine. Then wash them with detergent in hot and then cold water, then use a centrifuge to finish washing.
This is necessary in order to see which of the sweaters shrink more during the washing process, and which do not change their original shape at all.

To do this, prepare a template of the desired size from cardboard.

Having made the squares, figure out how they will be placed by laying them out on the floor.

You can start sewing. I used the largest straight stitch on my sewing machine. Leave an allowance of about 1/4 inch. Sew all the pieces together, gently pushing the fabric, if necessary, slowly drag it through the sewing machine. After sewing, the sewing machine will have to be thoroughly cleaned, as a lot of fluff remains.

Here are the large pieces that I finished with before making the final seams.

From the inside, it looks like this:

I also made a wool lining for my throw, you can use flannel, which also makes a great lining. I also rounded the corners of the blanket using the template.

As for the finishing, I do it by hand, using a closed overlock stitch. I really like the look that this stitching gives to the plaid. This is how I imagine a warm and cozy homemade blanket. I hope the photos help to better imagine how to make a stitch.