How to tie St. George ribbons step by step instructions. St. George's Ribbon: what it means, how to wear it correctly. With kanzashi flower

Despite the fact that even the organizers of the distribution of St. George ribbons offer to tie them on handbags, car antennas or wrists, it would be more correct to honor the memory of soldiers and show respect for veterans - to pin this symbolic sign on the chest from the side of the heart, so as not to desecrate it.

The St. George ribbon is most often fastened to clothing as a badge on the lapel. The easiest way is to fold the ribbon in the shape of a loop or zigzag (the best option for a short ribbon) and pin it to the clothes with a safety pin, piercing the ribbon itself in the overlap area. A simple bow from the St. George ribbon is easy to get from the previous version: fold the ribbon with a loop, as in the photo above, and then pull the top of the loop to the overlap (intersection) of the two ends of the ribbon and pin the center (the most multi-layered place of the bow) to the clothes with a pin. The center can be tightly wrapped with a thread (orange or black) vertically, then the bow will be more elegant. Such a bow is already made from three pieces of ribbon. If you want the bow to be 15 cm wide and high, cut two 30 cm ribbons and one small one (its length should be twice the width with a small margin):

On one long ribbon, cut corners on both sides.
Scorch all raw edges of all pieces of tape with fire so that they do not “spread”.
Fold the second long piece in the shape of a circle (connect the edges from below with a slight overlap), flatten the middle of the tape so that it is exactly above the junction of the two ends. Sew with thread or use a glue gun to secure the workpiece.
Wrap the middle of the workpiece with a short piece so that the edges of the piece are connected on the reverse side, sew or glue the edges and fasten the elements together. It turned out the basis of the bow.
Fold the piece with cut edges into an “L” shape and attach the top of the corner to the back of the bow.

Like the previous version, with minor complications, you can fold the St. George ribbon into a shape that vaguely resembles a little man. In this case, you will need two long ribbons of 45 cm or more and one short one, as in paragraph 3, singe all edges:

Fold a long ribbon into a circle, connect the edges from below.
“Flatten” the sides of the circle so that you get a “figure eight”. Temporarily secure the contact point with a needle or pin.
Squeeze the “figure eight” vertically so that the top, the fastening needle and the junction of the edges are clearly under each other. Get a double bow. Baste or glue the connections, remove the needle.
Wrap the bow in the center with a short piece of tape, fasten the junction of the edges on the back of the workpiece.
Fold the remaining free long ribbon in a loop, as in step 1, and attach it to the back of the bow at the crossing point.

If the center of the bow in option 3 or 4 is slightly gathered up and decorated with a brooch, beads or a flower instead of a transverse ribbon, the bow will already look completely different. An elegant bow from a long St. George ribbon can be made like this:

Lay the end 40 cm long on the table, hold the rest of the tape in your hand.
Lay the next layer in the opposite direction, measuring approximately 25 cm.
Fold the tape in a zigzag, shortening the side by 3-5 cm each time.
At the last stage, leave a "tail" 15-20 cm long from the center of the bow.
Secure the middle with thread or a safety pin.
Place the ends of the tape in a corner, secure in this position.
Cut the corners around the edges and singe.

An unusual bow, but it is done simply:

Fold the St. George ribbon 30 cm long with a “figure eight”, as in the photo, fasten the junction of the edges.
Wrap the center with a short piece of tape, sew in the workpiece from the back.
From two black ribbons 25 cm long, fold the bases of the bows (the joint of the ends from the bottom in the center) and connect the blanks together with a cross.
On top of the black “cross”, fasten a bow from the St. George ribbon.

04. 05.2017

Catherine's blog
Bogdanova

Dear friends and readers of the site "Family and Childhood"! We continue to prepare together with you for the wonderful May holiday - Victory Day. And we will march in the Parade with our heads held high, because we are all descendants of the Great Winners who liberated the whole world from the Nazis. We have already considered together with you the option of modeling a patriotic one. A wonderful accessory can be repeated by everyone.

But for those who still have some questions about how to make a loop, or do not have time for such experiments at all, another article is presented. From it you will learn how to tie a St. George ribbon beautifully. The final photo shows 3 simple options. Choose any.

By itself, a striped orange-black ribbon already looks rich, it is not necessary to decorate it with kanzashi elements. And you can make a small accessory for yourself and loved ones in a matter of minutes, having only a thread with a needle and superglue in your arsenal. You don't even need a glue gun. So, let's look at all the details in detail.

1 version of the St. George accessory - the famous loop

To model it, you only need a ready-made tape 2.5 * 25 cm in size and waste cardboard from which the template should be cut. The template is a rectangle about 6 cm wide and of arbitrary length with beveled edges (on one side). Trim the corners on one side of the rectangle so that a 2 cm long side remains in the center and the beveled sides become 3.5 cm.

Lay out the St. George ribbon horizontally, put cardboard on it so that the beveled end is clearly on it. Bend first one side of the tape, then the other. Thus, you will get an even loop, which can be further decorated with kanzashi elements.

But our plans include modeling the simplest option. That is what you can use. You will not need any additional details, only an invisible needle, which is convenient to fasten the resulting loop to the jacket. Holding the accessory in the center with your finger, remove the template, attach it to the jacket and secure with an invisible or clip. That's all.

St. George's accessory option 2 - a bow with double loops

To make such an accessory, which is more suitable for women and children, you will need 4 pieces of a striped St. George ribbon with dimensions: 20 cm, 18 cm, 14 cm, 7 cm (each one). And also for fastening you will have to use superglue or a thread with a needle.

Leave the smallest segment 7 cm for the middle. Bend two parts 18 cm and 14 cm to the center to make double loops. Place the larger piece on top of the smaller one. At this stage, you can already glue the layers of the bow or leave it like that for now. Bend a length of 20 cm in half and split to the sides.

Lay a 7 cm piece on the central part of the bow.

Close the ends of the small section at the back of the bow by sewing or gluing them together. From below, glue the longest, bent in half segment to show the ponytails. Photo 6 The resulting bow can be sewn to the jacket, pinned with a pin.

St. George's accessory option 3 - a bow with four loops

To make another model of a bow, you will need 2 pieces of St. George's ribbon 16 cm each, 1 piece - 14 cm long and 1 piece - 5 cm. Again, the method of fastening is a thread with a needle. Photo 7

Bend two strips of the same length 16 cm in half in the same way as in the second case - pointing the opposite ends towards the center. Lay both parts together, arranging them lengthwise end to end. Pull the thread through the center with large stitches. Cut a length of 14 cm from both ends in the shape of birds, bend in half.

Pull the thread into a tight knot. Wind a small piece of 5 cm in the center. The upper and lower parts of the brooch are ready.

Sew the resulting bow to the ponytails.

Think of a mounting method. Naturally, a pin is the easiest option.

Dear friends, now you know 3 simple but reliable ways to model a beautiful St. George's loop. Going to the parade, stop by the store to buy accessories, the recommendations presented will allow you to quickly make wonderful accessories for the whole family. Share the article on social networks, this information may be useful to one of your friends. And all of you will go to the main square of the city with memorial signs of respect to veterans.

Sincerely, Ekaterina Bogdanova

Before learning how to tie a ribbon, you need to know where this accessory can be worn. So, the tape can be worn by attaching it to the chest on the left side (near the heart). It can also be tied around the wrist with a double knot or simply on the sleeve. It is strictly forbidden to tie a ribbon on a dog's collar, tie it into the hair or use it instead of laces, as well as pin it below the waist (including on the belt).

There are many ways to tie a ribbon, but the most popular are the classic bow, the figure in the form of the letter "M" and the loop.

The easiest way to attach ribbon to clothing is to make a loop with one end longer than the other.

An equally simple way to tie a ribbon is the option in the form of a bow. To create it, first of all, make a wide loop, then connect the place of crossing the ribbons with the middle of the loop and tie with a thin elastic band in the color of the same color of the ribbon.

The third way is the letter "M". Take the ribbon, fold it four times, then stretch its ends in different directions to get the desired letter "M".

Well, the last way is a tick. To create it, you need to bend the tape so that one end is a third longer than the other, and then stretch its ends to the sides.

The fact that the people remember their significant deeds. An awkward and shameful moment is the realization that, having acquired such a valuable attribute, you go to the extreme of not knowing how such a precious symbol should be beautifully and correctly tied.

First, let's determine where she appears. would be appropriate: on the handles of a handbag, on a side mirror, on a car antenna, in the form of a symbol - decoration with a bow on clothes.

It is forbidden to decorate with St. George's ribbon: hair, dog collar, jeans belt. According to traditions, the St. George ribbon must be slaughtered by a society whose relatives were touched by the war years; citizens who know and understand what the price was for the sake of the taste of triumph and happiness of future generations; remembering and filled with pride for their homeland and its ancient past. This symbol of Victory should not be used as a regular decoration.

It is also unacceptable to use it in an inappropriate way. For those who do not want to break traditions and show disrespect for military personnel, there are tips on how to use the St. George ribbon, properly form it into a bow and attach it.

How to tie a St. George ribbon

1. First, lay the tape on a straight surface and grab it by the right end.

3. A similar process must be carried out with a different ending.

4. Without additional fastening, such a bow cannot keep its shape and will open, from this we pierce it in the area where the limbs are crossed with a sewing pin and at the same time fasten it to the surface of the garment.

5. Hold both ends of the ribbon with your fingers.

6. Place the left ending on the right, then draw near it and pull the end of the tape down at a right angle on the right side, and up on the left.

7. Thus, the initial node is formed.

8. Then lay the lower end in this way to form a half bow.

9. In the next step, you need to find a half bow with the other unused end and tighten it into a loop almost to the end to create the next half bow.

10. And finally, pull both loops horizontally in opposite directions, after which you need to tighten the knot.

How to tie a bow with an elastic band:

Now the bow - the symbol has come to an end, we fix it to outerwear, a purse, or to a car. Create your own symbol - the St. George ribbon and wear it in honor of Victory Day and as a sign of memory of the fallen soldiers and pride in your Fatherland.

How beautiful to tie a St. George ribbon (bow) - video

St. George's Ribbon has been a constant symbol of victory for many years. Few know its history and understand the importance of this attribute. Where to wear a St. George ribbon, how to tie it beautifully - you will find the answers in the article.

The wearing of a ribbon folded in the form of various shapes is gaining popularity. It is not necessary to purchase this symbol, you can tie the ribbon yourself on the eve of Victory Day.

How can you beautifully tie a St. George ribbon?

There is no difficulty in tying the ribbon yourself for the purpose of decorating clothes, a bag. You can even tie a ribbon on the car beautifully. Although it is becoming popular to decorate with a ribbon whatever you want, in honor of the memory of the heroes and as a sign of respect, attach the ribbon to the clothes on the left side. So you do not desecrate the sacred symbol, but show respect to the memory of the fallen. You can attach a ribbon by securing it with a safety pin or by making a brooch. You can purchase a base for a brooch or use a regular pin.

Several ways:

A loop
lightning
Letter M
butterfly
bow
Tie
star
rosette
flower
You can make a kanzashi brooch from a St. George ribbon

How to tie a St. George ribbon

How to tie a St. George ribbon step by step

As mentioned above, tying the ribbon in a loop is the most common and easiest way. The main thing is that one end of the loop is slightly higher than the other.

St. George Ribbon

To get a lightning figure: Fold the tape in three
Pull the top end to the right

St. George ribbon - lightning

Ribbon in the form of the letter M: Fold the ribbon in half 2 times Pull the upper end to the right
Bottom - left

St. George ribbon with the letter M (May)

How to tie a St. George ribbon with a bow?

A classic bow can be easily obtained by folding 2 loops. Pin the middle with a pin, where the two ribbons overlap. If you tie a ribbon around the middle, wrap it with a thread or secure with an elastic band, then the bow will look more elegant.

St. George ribbon bow

For a more complicated St. George's bow, you will need 4 pieces of St. George's ribbon.

Cut pieces from the tape 18, 9 (x2), 5 cm long
Fold the long piece in half so that the joint is in the middle

With a 5 cm cut, wrap the resulting workpiece in the middle, closing the joint. Secure everything with glue or thread
In two identical segments, pull off one edge and cut the other with cloves
Attach the ends to the workpiece

George's bow

You can fold an interesting bow in the form of a man from 4 pieces of St. George's ribbon

Cut ribbons 24, 14, 10 and 7 cm long
Make a loop out of the longest ribbon
Roll the ribbons of 10 and 14 cm into a ring, press and lay on top of each other, securing with a pin
Wrap with a 7 cm ribbon at the point of attachment with a pin
Place the workpiece on the prepared loop
Fasten all the parts together with thread, glue gun or pins
You can decorate the center with a flower or a rhinestone

St. George ribbon bow

From a very long ribbon, you can make a chic bow:

Lay the end of the tape on the table (about 35-40cm)
Lay the tape on top of it in layers, make each row shorter by 4-6 cm on each side
Leave the end of the ribbon about 20cm long from the center of the bow
Secure the layers with a pin
Cut the ends in a zigzag and place in a corner

Gorgeous St. George ribbon bow

The figure-eight bow looks unusual, but making it is very simple:

Take a ribbon 25-30cm long
Fold the tape into a figure eight, fasten the edges
With a smaller ribbon, tie a figure eight at the junction, secure
From two black ribbons 20-25 cm long, fold a cross
Connect all the details

Bow from St. George's ribbon in the form of a figure eight

How to tie a St. George ribbon with a tie?

St. George Ribbon Tie

Such a tie looks beautiful and unobtrusive, especially on kids.

Wrap the ribbon around so that the right end is longer than the left
Lay the left end on the right, passing under it crosswise
Make another circular weave, forming a loop
Pass the right end into the loop formed, moving from the bottom up.
Pull it out of the loop, then thread it into the eyelet
Tighten

How to tie a tie from a St. George ribbon

The algorithm for tying a St. George ribbon is no different from tying a regular tie and amazes with a variety of knots. I suggest you familiarize yourself with several more complicated schemes:

How to tie a tie

St. George Ribbon Tie

How to tie a St. George ribbon with a star?

In order to make an asterisk from a St. George ribbon, you will need 5 pieces 6 cm long.

Sew the piece in half in the middle
Bend the segment to form a beam
Repeat the same with the rest of the segments.
Gather all the rays together and form an asterisk

Asterisk for Victory Day

You can make a bow, as described above (bow-eight), from two segments connected by a cross. Place a star in the center of the bow - this way you will get a wonderful brooch

St. George ribbon brooch

To get a pointed star:

Cut 5 pieces of tape 6 cm long
Fold the piece in half and cut at an angle. As a result, you will get a trapezoid
Solder the cut points with a soldering iron or, in extreme cases, sew or glue them
Turn inside out
Repeat the procedure with the remaining four segments.

How to make a star from a St. George ribbon

Next, you can connect the rays with a soldering iron. Depending on which sides you connect the rays, you will get different versions of the star.

Star for Victory Day

A star from a satin ribbon looks beautiful. If you don't have a soldering iron, you can solder the ends with a lighter or over a candle flame.

Cut 5 lengths of 3.5cm and one - 11cm
Fold the short piece in half horizontally and solder one side
Unfold to make a corner
Fold the edge over to the next black line, repeat for the second edge.
Solder the end

Repeat the operation with the rest of the segments
connect rays
Fold a long segment with the letter L, after cutting the edges with cloves
Connect the parts, you can add some kind of decoration to the center

St. George Ribbon Star

Video: How to tie a St. George ribbon with a rose

How to tie a St. George ribbon with a flower, diagram

Prepare five pieces of St. George's ribbon 6 cm long and one piece 15 cm
Fold each short section in half
String all the petals on a thread and tighten it, forming a flower

How to make a flower from St. George's ribbon

Fold the long piece into an L
Sew the flower to the ribbon
You can decorate the middle with a rhinestone or a badge

How to tie a St. George ribbon on a car and on a bag?

St. George's ribbon is a symbol of victory, a tribute to the heroes, so keep an eye on its appearance. It is unacceptable to use a tape instead of laces or a collar for a dog or cat. If you don't want to attach the tape to your clothes, you can tie it around the handle of your bag, your car's antenna, or your rearview mirror.

How to tie a St. George ribbon on a car

How to tie a St. George ribbon on a bag

How to tie a St. George ribbon beautifully, video

babyben.ru

How to tie a St. George ribbon

The St. George ribbon is a symbol of honor and victory. Today it is customary to wear it only for the celebration of Victory Day on the ninth of May. But in fact, the history of the tape goes far into the past.

St. George's Ribbon is quite revered in the country. Putting it on on Victory Day, a person expresses his deep gratitude to the veterans of the Great Patriotic War for saving him from the Nazis and delivering his native land from the German invaders.

Today there are many ways to tie the St. George ribbon. The most popular are:

A loop. To implement the tying method, it is enough to take the tape and put one edge on the other so that a loop is obtained. It is important to remember that one edge of the tape should be longer than the other.
Check mark. This is one of the easiest ways to tie a ribbon. It looks perfect and looks very conservative. For implementation, you need to fold the tape in half. Next, you need to slightly push the edges of the tape. One end should be longer than the other.
Tie. In this case, you will need a non-standard length ribbon, as it will be tied with a tie around your neck.
Knot. For this method, it is enough to tie a knot on the tape itself. It is necessary to tie not very tightly for an attractive appearance.
Bow. With this method of tying, it is necessary to initially make a loop with a very wide opening. We mark the middle at the top and apply it to the junction. You can fasten with a pin or sew. You can try to glue it to the intersection.

These are the most common and popular methods of tying a St. George ribbon. For an attractive appearance of the products, burn the ends with a lighter so that they do not split.

A complex bow is a more difficult task for those who wish, but it is quite feasible. In this case, you may need two St. George ribbons of the same size.

To tie in a way, it is initially necessary to make a loop and sew the middle of the upper part with the base of the intersection. From the second tape you need a wavy product. Unfold the ribbon and starting from both edges, wrap them.

Attach by sewing. How many layers to make is decided directly by the person himself. The best option is to have three layers. This product must be sewn under the main bow.

For beauty, decorate the junction of the upper base with the intersection with a brooch or sew on beads, sequins or glue rhinestones.

Where can I attach

To achieve an attractive appearance of the ribbon, it is not enough to tie it correctly. It is necessary to attach it in such a way that it is in the most visible place, but does not look defiant and does not catch the eye sharply. After all, this symbol of victory is an individual sign of respect and gratitude to the people who defended our native land.

Traditionally, the St. George ribbon is tied with a loop and attached to the chest with a pin. It is desirable to attach from the side of finding the heart.

It is important to remember that the St. George ribbon is not only a symbol of victory, it represents the prototype of the Order of St. George, it is highly undesirable to use it as an elastic band for hair or other items of the image.

The best option is to attach the tape directly to clothing. If there is no such probability due to damage to the product, tie a ribbon in the form of a bracelet on your hand.

It must be remembered that the St. George ribbon is a symbol and must be treated with great respect.

One way is to tie a St. George ribbon on the car. So a person symbolizes his gratitude for the opportunity to move freely around the country thanks to the actions of the defenders of the Fatherland.

Where not to tie a St. George ribbon

By tying a ribbon, a person expresses his gratitude to the veterans for the peaceful sky above their heads. Therefore, this piece of matter must also be treated with respect. You can not tie the ribbon in such images as:

On a bag or other items.
Use a ribbon of a similar color instead of laces for sneakers or other shoes.
Use as a rubber band.
To be tied completely imitating the presence of a belt at the waist.
Use as shoelaces or animal leashes.

The history of the St. George ribbon

For the first time the St. George ribbon appeared in the seventeenth century. In ancient times, it symbolized valor, courage and honor. Awarded for great achievements in the field of military operations.

The colors for the St. George ribbon were chosen personally by Catherine II. According to the story, orange means flame and fire, and black smoke during battle.

The history of the St. George ribbon implies the passage of stages:

Introduction of the Order of St. George by Great Catherine II. It is to her that the St. George ribbon owes such a unique color scheme.
After the introduction of this order, a special building was allocated for its award. This happened in the eighties of the seventeenth century.
In the eighteenth century, the order was awarded for military merit.
After the October Revolution, the ribbon disappeared for a while. It began to be replaced with ribbons with other colors.
In 1943, the government of the country restored the ancient traditions and appearance of the St. George ribbon. The most honorary medals and orders were attached to it.

After the Great Patriotic War, the St. George ribbon began to serve as a symbol of victory over the Nazi invaders. On its basis, medals received in combat were awarded.

The ribbon got its name because of the initial award of the order. After all, it was this title that was originally awarded for courage and bravery on a ribbon of this color.

In Ukraine and Russia, the mass use of this symbol of victory fell on the beginning of the nineties of the nineteenth century.

The St. George Ribbon has become a symbol of respect, it symbolizes gratitude for the years of war spent and human lives lost in the struggle for peace.

zheleznaya-lady.ru

How to tie a St. George ribbon

Despite the fact that even the organizers of the distribution of St. George ribbons offer to tie them to handbags, car antennas or wrists, it would be more correct to honor the memory of soldiers and show respect for veterans - to pin this symbolic sign on the chest from the side of the heart, so as not to desecrate it.

The St. George ribbon is most often fastened to clothing as a badge on the lapel. The easiest way is to fold the ribbon in the form of a loop or zigzag (the best option for a short ribbon) and pin it to the clothes with a safety pin, piercing the ribbon itself in the overlap area.

A simple bow from the St. George ribbon is easy to get from the previous version: fold the ribbon with a loop, as in the photo above, and then pull the top of the loop to the overlap (intersection) of the two ends of the ribbon and pin the center (the most multi-layered place of the bow) to the clothes with a pin. The center can be tightly wrapped with a thread (orange or black) vertically, then the bow will be more elegant.

Such a bow is already made from three pieces of ribbon. If you want the bow to be 15 cm wide and high, cut two 30 cm ribbons and one small one (its length should be twice the width with a small margin):

On one long ribbon, cut corners on both sides.
Scorch all raw edges of all pieces of tape with fire so that they do not “spread”.
Fold the second long piece in the shape of a circle (connect the edges from below with a slight overlap), flatten the middle of the tape so that it is exactly above the junction of the two ends. Sew with thread or use a glue gun to secure the workpiece.
Wrap the middle of the workpiece with a short piece so that the edges of the piece are connected on the reverse side, sew or glue the edges and fasten the elements together. It turned out the basis of the bow.
Fold the section with cut edges into an “L” shape and attach the top of the corner to the back of the bow.

Fold a long ribbon into a circle, connect the edges from below.
"Flatten" the sides of the circle so that you get a "figure eight". Temporarily secure the contact point with a needle or pin.
Squeeze the "eight" vertically so that the top, the fastening needle and the junction of the edges are clearly under each other. Get a double bow. Baste or glue the connections, remove the needle.
Wrap the bow in the center with a short piece of tape, fasten the junction of the edges on the back of the workpiece.
Fold the remaining free long ribbon in a loop, as in step 1, and attach it to the back of the bow at the crossing point.

If the center of the bow in option 3 or 4 is slightly gathered up and decorated with a brooch, beads or a flower instead of a transverse ribbon, the bow will already look completely different.

An elegant bow from a long St. George ribbon can be made like this:

Lay the end 40 cm long on the table, hold the rest of the tape in your hand.
Lay the next layer in the opposite direction, measuring approximately 25 cm.
Fold the tape in a zigzag, shortening the side by 3-5 cm each time.
At the last stage, leave a "tail" 15-20 cm long from the center of the bow.
Secure the middle with thread or a safety pin.
Place the ends of the tape in a corner, secure in this position.
Cut the corners around the edges and singe.

An unusual bow, but it is done simply:

St. George's ribbon 30 cm long, fold the "eight", as in the photo, fix the junction of the edges.
Wrap the center with a short piece of tape, sew in the workpiece from the back.
From two black ribbons 25 cm long, fold the bases of the bows (the joint of the ends from the bottom in the center) and connect the blanks together with a cross.
On top of the black "cross" fasten a bow from the St. George ribbon.

St. George's ribbons can be decorated with a flower made using the "kanzashi" technique (more details here). Attach a pin for a brooch on the reverse side of the decoration from the St. George ribbon, you can buy them in the needlework department.

The St. George ribbon should be worn carefully and with dignity, because this is a way to express your respect for the warring generation of heroes, to feel a patriotic mood and pride in the Motherland!

sovetclub.ru

How to tie a St. George ribbon?

Not only veterans and officials, but also all townspeople are preparing for the upcoming May 9 holiday. Bright posters and signboards appear on the streets, stages for concerts are set up, everywhere we see festive symbols and a permanent attribute of the Victory Day - St. George's ribbons.

What does the St. George ribbon symbolize?

The St. George ribbon itself was established back in 1769, it was supplemented with an equilateral cross or star. Such an award was awarded only to the elect, who showed wisdom, honor, courage and patriotism.

The St. George ribbon was part of the highest military award - the Order of St. George. The specific color of the ribbon has not changed since then, 3 black stripes and 2 orange, the piping is also made in orange.

Orange and black were considered state colors, as they were used on the coat of arms of the time of Catherine II. These colors symbolize smoke and fire, death and resurrection, the struggle and difficulties that soldiers have to face in war.

For modern society, the decoration of clothes with a St. George ribbon symbolizes honor and respect for veterans, a tribute to the fallen wars.

Where to buy a St. George ribbon?

The main attribute of the Victory holiday is the St. George ribbon. A small piece of two-color fabric, only about 20 centimeters long, today is associated with Victory Day in the Great Patriotic War. Usually, on the eve of the holiday, volunteers distribute free ribbons to everyone in the central squares and stopping points. Those who were not lucky enough to get to the distribution can purchase tapes:

in kiosks ROSPRINT
at souvenir sellers on the day of the holiday
in fabric and sewing shops

The cost is low, from 10 to 30 rubles, depending on the conscience of the seller.

How to tie a St. George ribbon beautifully?

Despite the small size, there are many ways to beautifully tie a St. George ribbon. First of all, you should choose where exactly you want to attach it, to the lapel of a jacket, to a buttonhole, to a tie or bag.

Ways to tie a St. George ribbon

We offer you several common patterns for tying a St. George ribbon.

How to tie a St. George ribbon with a check mark: diagram

Fold the ribbon in half, tighten so that one end is slightly shorter.
Pull the short end up a little to form a loop.
Now use a pin to secure it to your clothes.
Folding the ribbon into a bow is also very simple, in fact you need to make two checkmarks, you don’t need to tie anything. It is enough to make two loops at an equal distance from the center.
Now fasten the ribbon to the clothes with a pin so that the bow does not fall apart.

How to tie a St. George ribbon with a bow with dressing?

Fold the bow according to the previous scheme so that it does not fall apart. You can tie the place of the crosshair with a thread or an elastic band.

How to tie a St. George ribbon with a big bow?

A complex ribbon bow will require a creative approach. First, cut the tape into 3 pieces, two pieces of 30 centimeters and one 5 centimeters.

At a long segment, connect the ends so that you get a vicious circle.
Fold the circle in half.
Wrap the middle with the shortest tape and secure the ends with a glue gun or sew.
Fold the second long piece in half and spread the ends to make a regular checkmark or letter "L". Attach the first blank to the top of the letter.

How to fold a St. George ribbon with an elegant bow?

For such a scheme, you will need a long cut about 1.5-2 meters long and a small piece about 40 cm long.

To begin with, put a short cut on the table, start laying the tape across it in a zigzag pattern, that is, each time reducing the length by 5 cm.
You can start at 25 cm and end at 5 cm with 4 moves in each direction.
At the end, throw the free end of the short cut through the middle of the workpiece and secure with pins or a glue gun.

How to fold a St. George ribbon with a zipper: diagram

Another original way is to fold the tape in the form of a zipper or an inverted Z. Laying should be done directly on the clothes on which you plan to attach the tape. You just need to fold the tape three times and spread the ends in different directions by 30 degrees. Now gently pin it to your clothes.

How else can you tie a St. George ribbon: photo

We offer you a couple more options on how to tie a St. George ribbon beautifully:

Where can not attach the St. George ribbon?

St. George's Ribbon is a symbol of respect and honor. Usually it is placed in the place where veterans wear their orders and medals, that is, on the left side of the chest, near the heart. Can be worn on the wrist.

It is unethical to place the St. George ribbon below the waist, on the head, on the dog's leash, on shoe laces.

Motorists can decorate the car by tying a ribbon around the antenna, mirrors or windshield wipers. It is also worth noting that any holiday, having begun, requires completion, so do not forget to remove the ribbons. From city dust and dirt on the roads, they quickly get dirty and look unattractive.

Preparations for the holiday and the holiday itself on May 9 are held in their own way for everyone: someone prepares photographs of grandparents for the immortal regiment, someone visits older relatives, most go for festivities in the city center or in nature. To make this holiday memorable for you and your children, spend it with dignity, say thanks to the veterans and visit the monuments to fallen soldiers.