Marble gel manicure. Marble effect manicure - various techniques for step-by-step design with a photo

Marble effect on nails, water manicure how to do, step by step instructions

The nail design imitating natural stones looks very beautiful. This type of nail art is called "marble manicure". There are several ways to create it, here we will consider three, of varying degrees of complexity. However, all of them are doable at home, even if you do not have special training as a nail master. :-)

1. "Marble" on varnish.

1) We cover the nails with a layer of dense blue, let it dry completely.
2) Apply a layer of blue on top.
3) With a crumpled piece of cling film, with jerky movements, lubricate the freshly applied coating.
4) Align the varnish in the cuticle zone, using a wide bevelled.
5) We fix the top.
6) We erase smears and bloopers from the skin.
Ideally, you should use a protective film, then all errors and imperfections will remain on it, and it will be even easier to remove them.

2. "Marble" on varnish.

1. We choose varnishes with which you can imitate the "texture of natural stone", for example:,.

2. We use emerald as a base, apply in two layers, wait for complete drying.

3. We crumple a piece of cling film and cover it with black varnish.

4. We print the excess on paper, transfer the rest to the nails.

5. Repeat the same with a golden hue.

6. Using black and gold coatings, draw the veins with a thin brush.

7. We cover.

The next version of the marble design is called a water manicure, because it is done with water. We will need: for the cuticle, either narrow adhesive tape or fat cream, orange (someone will be more comfortable using toothpicks), a glass of water, and varnish (any other contrasting shades), patience and time.

3. Marble design. water manicure.

1) Apply to the skin around the nail plate or glue it with narrow adhesive tape (we smear it with a fat cream).
2) We paint the nails with white varnish, let it dry completely.
3) We drip white varnish into a glass of water, then red in the middle of the formed spot. Once again white and red, white and red, white and red (about 6-8 times in total).
.4) With an orange stick, "cut and twist" the lacquer blot, creating a pattern.
5) Dip your finger into the glass.
6) We wrap the excess pattern around the nail on the orange stick.
7) We take out the finger, remove the protective film or adhesive tape.
8) We fix.

Beautiful fancy patterns, smooth lines and interesting stains can be easily created on the nails by making marble nail art. And, despite the intricate design, this manicure is easy enough to do at home. Using plain water, a simple bag and a few favorite polishes.

Extraordinary combinations, abstract patterns and colorful overflows can be easily created on your nails by making an original marble manicure. Moreover, this technique allows not only to create a unique design, but also gives a chance to show your individuality and demonstrate to everyone a sense of style. In addition, do not think that marble manicure is very difficult to do at home. Due to the ease of design and the variety of ways to perform this technique, this design can be easily done from improvised means using a standard manicure set and a few favorite varnishes.

The color palette of this nail art

Before proceeding with the procedure for decorating nails and creating a unique masterpiece at home, you should pay attention to the combination of a shade of varnish. First of all, you need to know that marble design allows you to use and mix absolutely all colors, without adhering to any quantitative and color restrictions.

However, nail masters recommend mixing shades that are similar in color. For example, a combination of nude polishes looks very beautiful and gentle, yogurt tones in a duet with ordinary light polish are also a great solution, and traditional red-pink or blue-blue overflows look simple but original.

In addition to the smooth combination of the same shades, you can experiment with contrasting colors. The design looks very stylish in red and blue lacquer, black and white, beige and green or pink and purple. It is worth noting that each time a marble manicure will turn out completely differently, and this is another opportunity to create completely different patterns from the same varnishes.

Nail art on the water

There are several ways to recreate the unusually beautiful patterns of a noble stone on the nails. And the most common way is aqua design, that is, nail art made on the water. And do not think that this technique is not feasible at home, on the contrary, everyone can create a marble manicure, and in just a few minutes.

See how to make a water marble manicure.

But before you test your design skills, you should prepare for the nail design procedure and prepare the necessary tools and material. Namely: a manicure set, base, top, several varnishes or gel polish, toothpicks, cotton swabs, hand cream and warm water. Once all the necessary tools are at hand, you can safely get to work.

First of all, you need to put your nails in order using a manicure set.
Then apply the base on the surface, and after it dries, apply a decorative layer
When the second layer is dry, you can proceed to the main nail design procedure.
You should take a glass of warm water or another small container, such as a saucer. Then, one drop of gel polish should be dropped into the center of the glass or a regular product should be used. After waiting until the varnish spreads, drip into the center with another varnish, and then repeat the procedure again until a striped pattern forms on the surface
Armed with a toothpick, you can make original patterns from the resulting striped decor by running a toothpick over the surface in one or more directions.
To make the design look neat, generously lubricate the skin around the nails with a fat cream
Next, dip a few nails into a colored film made with varnish and, after waiting a few seconds, remove the remaining varnish with a cotton swab, and remove the nails from the water. It should be noted that all excess from the skin should be removed only after the surface is completely dry.
Then cover the manicure with a top

Making a manicure with a package

Marble manicure using a package is a great alternative to the usual aqua design. In addition, such a simple option is very easy to do, while not smearing a single finger.

First of all, it is necessary to carry out all hygiene procedures
Then you should apply a transparent base, and after drying, apply a colored gel polish
While the first layer dries, it is necessary to prepare ten small pieces of the film, crushing it into lumps
Then apply on the first light shade, a varnish of a more saturated color, and without waiting for drying, apply the prepared lump of film to the nail with a sharp movement, thereby making small gaps and streaks
It is worth noting that each nail should be designed separately, and in case of contamination of the periungual part, clean it with acetone
To fix the manicure, you should cover the surface with a top

See how a marble manicure is performed using plastic wrap.

Manicure without staining

To create a design with streaks without staining your nails, it is recommended to use a tight bag, several gel or simple varnishes and a regular needle. Using this method, you should not be surprised and wonder how to make a marble manicure without using the basics of nail art. For this you need:

Paint a dense film with a light-colored varnish, then apply drops with another varnish, and drip with a third varnish in the center. Until the surface is dry, patterns or simple stains are made with a needle.
When the color base on the film dries, it is necessary to carefully remove it and try it on the nails, cutting out 10 templates
Paint the surface of the nails with the base and apply the template on the nail, pressing it firmly
Then remove unnecessary parts with scissors and cover with top

As a result of such uncomplicated actions, the nails will be decorated with extraordinarily beautiful patterns, and the nail art created by your own hands will impress not only its owner, but also those around you.

Nail design in the form of bizarre streaks is called "marble manicure". It imitates the surface of a noble stone. An unobtrusive ornament is universal, the main thing is to choose a color. At the Spring/Summer 2015 fashion show, a marble manicure graced the nails of Tracey Reese's models. In 2016, marble nails were seen at the shows of Phillip Lim, Christian Siriano, Tadashi Shoji.

And designers draw inspiration from the creations of Persian masters. Craftsmen from Persia many centuries ago made marbled paper with beautiful stains for making book bindings. Later, the marbling technique began to be applied to other materials: wood, plastic, metal, fabric, and gradually reached the nail plates of modern fashionistas.

Marble manicure with gel polish

You can make a marble manicure not only in the salon. If you practice gel polish manicure at home, try the water technique for creating a pattern on your nails.

Prepare nails: shape, cut cuticle, buff the surface of the nail.
Degrease nails and apply a special primer.
Cover your nails with base and dry in a lamp.
Take a container of warm water - a disposable cup will do, and drop a drop of gel polish of the selected shade onto the surface of the water.
Depending on the intended result, add a couple of drops of varnish of a different shade.
With a toothpick, create random stains by mixing shades.
When the result resembles a natural stone, proceed to coloring the nail. Dip your finger into the water so that the surface of the nail is parallel to the surface of the water.
With a toothpick, remove the varnish film from the nail to the edges of the container, remove your finger from the water.
Using a gel polish remover and a Q-tip, touch up the manicure by removing the polish from the skin around the nail.
Dry the nail in the lamp.

Experiment - do a marble manicure with a design. Decorate your nails with rhinestones or broths. Before drying the nail in the lamp, add stains using a brush.

Marble manicure with regular varnish

If you are just trying to create a marble manicure at home, mistakes may appear. Gel polishes are an expensive pleasure, and the material consumption when using water technology is colossal. At first, practice doing a marble manicure in a different way - using polyethylene.

Prepare nails: remove cuticle, file, file, buff nails.
Coat your nails with a base coat to ensure the durability of the manicure.
Apply colored varnish, wait until it dries completely.
Apply a layer of varnish in a different shade and immediately start designing.
With the help of a crumpled piece of plastic wrap, make stains on the surface of the nail. Perform patting movements or “swiping” - run the film over the nail, but do not press hard.
Wait for the colored polish to dry and apply a clear protective coat.
Correct mistakes - remove varnish from the skin around the nails, using an orange or cotton swab dipped in acetone.

What shades of varnishes to choose for a marble manicure

Pink marble manicure is popular among young fashionistas. Use white and pink polish or two or three shades of pink - from pastel to fuchsia.
Marbled manicure in blue and gray tones suits girls with a cold skin tone.
Marble manicure in nude tones - for owners of warm beige and peach skin.
Red marble manicure - for brave ladies. Black and red stains on the nails will complement the Gothic look, and use red with white or red with blue to support the marine style.
Shades of green and turquoise are suitable for imitation of malachite and turquoise. For such a manicure, wear rings with the appropriate ornamental stones.

Mistakes in creating a marble manicure

When using water technology, you used cold or too warm water.
The use of varnishes from different manufacturers - their formulas are not combined with each other.
Too thick varnishes.
A narrow container in which you accidentally touched its edges with your nails.
Do not clean the toothpick before creating each divorce.
The toothpick was immersed in the varnish film by more than 5 mm.

When you have mastered the marbled manicure technique to perfection, start developing an exclusive design. Take a look at the various options for a marble jacket. Make the edge monophonic or, conversely, decorate the edge with stains on a plain nail.

An original manicure helps any woman feel more beautiful and more confident. At present, there are many different techniques for performing, but marble on nails is especially popular. They are covered with a coating that imitates the texture of natural stone. It looks stylish and unusual, it will appeal to girls who love an original, attention-grabbing manicure.

Marble nail design

A manicure made using this technique is called "marbling". It looks unusual, but not vulgar, and is very popular. For a marble design, you will need at least two varnishes. They are applied to the nails, forming abstract patterns, creating an imitation of the texture of natural stone. Depending on the color, the nails will resemble malachite, sapphire, ruby, amethyst. There are a number of ways to perform a marble manicure: using water, cling film, brushes. It is worth noting that it looks great on both short and long nails.

There are many solutions in which stone manicure looks advantageous both on its own and with other types of design. Application is practiced both on all nails, and on several to create an accent. It is allowed to use additional decor details in the form of rhinestones, broths, sparkles, thin ribbon. Manicure color ideas:

Classic white marble. Calm nail art. Divorces in black and gray are applied to the base white color. Lovely manicure for everyday wear, looks stylish.
Visualized french. Marble effect is created on the free edge and separated by a clear smile line. Color performance can be any, but more often light options are preferred.
Dusty gray marble. Manicure in this range looks attractive. Light options are suitable for everyday wear, and dark ones are suitable for going out.
Pale pink marble. Looks sophisticated and feminine.
Sapphire blue marble. Exquisite manicure. Combines blue, purple stains, imitates the texture of sapphire.
Azure. Coated marble nails in vibrant turquoise and blue tones are bold and eye-catching.
Black marble. The manicure does not look gloomy, because the dark background is decorated with white stains. Looks neat and elegant.

Marble on short nails

If the length of the plate is small, then the choice of manicure should be approached taking into account some features. On short nails, sweeping and complex small patterns look bad, but marble is a great option. What you need to take into account when doing a manicure:

The shape of the nails can be any. The most advantageous will be a clear and soft square. An oval is suitable if the length of the nail plate is close to medium.
On short nails, water or brush application techniques are more suitable. It will be difficult to make a marble effect with a film.
Choose your colors carefully. Dark shades visually reduce the nail plate. Light ones will make it bigger.

Marble effect on long nails

Marbling will look very nice. Particular attention should be paid to the shape of nails, both natural and artificial from gel or acrylic. For marble, oval and slightly pointed almonds are best suited. As for color, you should not be limited to the classic black and white combination. A manicure in blue, burgundy, emerald green tones will look very expressive. You can try to emphasize the stains with thin gold or silver stripes. This will quickly turn a simple design into a sophisticated evening.

Technique for performing marble manicure at home

There are several ways to design the nail plate. The marbled effect will be slightly different depending on which lacquer technique you choose. Each of them is very simple. With a little practice, you will learn how to do a marble manicure at home very quickly in any of three ways: using cling film, a brush or water. Try different techniques to see which works best for you.

This technique of making marble is one of the simplest. To create a design, you will need two varnishes in contrasting shades, several toothpicks, a handy container for water and a very oily hand cream. Step-by-step instruction:

Prepare your nails. Give them the desired shape with a nail file. Apply base coat.
Lubricate your fingers with cream, without touching the nail plates. This must be done so that excess varnish can be easily removed from the skin.
Fill a bowl with warm water. Apply one drop of each nail polish and use a toothpick to create a pattern by making random strokes.
Gently dip your finger into the water with your fingernail down on the varnish film so that the pattern remains on it. Carefully remove excess with a cotton swab.
Adding drops of varnish as needed, coat all fingers.
Apply top coat to nails and let dry completely.

There is a second way to perform a marble manicure on the water, in which the pattern will be more realistic. An added benefit is that the process takes less time. Step-by-step instruction:

Prepare your nails. Apply a base coat on them, a varnish of the main color in two layers. Let dry well.
Treat your fingers with a fat cream.
Drip a varnish of one contrasting color into the water. Let the material loosen up a bit. Spray some hairspray on top.
Dip your nail into the container so that a film with stains is transferred to it.
Wipe off excess and apply clear top coat.
Repeat the procedure for all other nails.

This way of doing a manicure is not as easy as the previous one, but you can easily master it if you practice. To make a marble pattern, prepare a piece of plastic bag or cling film about 5x5 cm in size. Take two nail polishes in contrasting shades. It is desirable that they be thick, because with liquid the effect of marble on the nails may not work. Step-by-step instruction:

Prepare your nails. Apply base coat to them. Dry well.
Apply a second polish. While it has not yet frozen, crush a piece of polyethylene in your hand and touch it to each nail in turn. Do not hold the film, immediately remove it from the surface. Part of the material will be removed, stains and streaks will remain.
Having received the desired pattern, wait for the coating to dry completely and apply a glossy fixative.

To perform a marble manicure, you will need acrylic paints. You can also use contrasting varnishes, but the effect will not be as realistic. Step-by-step instruction:

Prepare your nails. Shape them, apply base coat and base coat. You can't wait for it to dry.
Prepare a very thin brush and acrylic paints in contrasting colors. To start, take one shade. Gradually, you will be able to work with several colors at once.
Dip the brush into the paint of your choice and draw broken, curved lines on the plate. They should be different in thickness and diverge in directions, imitating cracks. The more asymmetry the better.
Apply topcoat and dry.

There is a way to perform a manicure for people with limited time. Some manufacturers let in varnishes in which several shades are mixed at once or color blotches are added. The coating imitates the effect of marble. The advantages include the fact that such a varnish is easy and quick to apply. This does not require special practice or time costs, as is the case with performing a manicure on water, with a brush or film. Minus - the price of marble varnishes is high.

Video

Marble manicure has long been a "hit" among the many options for nail design. It looks spectacular, but both perseverance and attentiveness are required from the master in order to get the proper result.

Outwardly, a marble manicure looks like stains of various shades, smoothly replacing each other.

The color scheme can be both classic and unusual, bright, the main thing is to choose shades that are in harmony with each other.

So, combinations of gray and white, blue and white, white and pink are in demand.
If you mix different tones of green, you can imitate the color of the malachite gemstone, while cyan and blue give a shade of turquoise.
Golden lines will simulate layers of mica.

Often this type of manicure gel polish is called water. This is due to the fact that one method of its implementation requires water.

However, some masters also practice the waterless technique - painting with a brush, and even use plastic bags or cling film.

Water is a platform for mixing gel polishes. The finger in the water is easily enveloped, the color is easy to apply and dries well.

Consider the technology for obtaining such an original design using water.

For work you will need:

dishes for water (it is better to take a disposable cup and throw it away after the procedure is completed),
at least two gel nail polishes in different colors,
primer, base and top,
toothpicks or a needle to create stains,
water at room temperature
drying lamp.

Operating procedure:

Prepare the nail plate - sand, buff, trim the cuticle.
Degrease the nail, apply primer. After a minute, the base and dry it.
Drop varnish into a container of water. It should spread over the entire water surface. Put a dot on the water with the second gel polish. Repeat the procedure several times with the alternation of the selected shades. Then, with a toothpick or a needle, draw patterns on the surface of the water - spirals, zigzags, stripes or other elements.
Hold the nail parallel to the gel polish film on the water and smoothly, without jerking, lower the finger into the water. Using a clean toothpick, roll the polish remaining on the water away from the nail. Repeat the procedure with other nails.
Using a cotton pad, clean the skin around the nail from excess coating (or apply a special protective agent to protect the skin).
If necessary, edit the drawing by drawing elements.
Dry the coating in the lamp.
Apply the base and dry in the lamp for three minutes.
Remove sticky layer.

VIDEO INSTRUCTION

If aqua manicure with gel polish did not work out, it is possible:

the water was too hot or too cold (water should be at room temperature),
gel polishes were old or too thick,
varnishes from different manufacturers "did not make friends" with each other.

If you do not want to use liquid, you can purchase marble effect gel polish which does not require the use of water. It is enough to cover the nail plate with it and dry it well.

Instructions - how to make marble nails with gel polish

Consider the option of creating such a manicure without the use of water.

Operating procedure:

Prepare the nail plate by sanding and filing it. Degrease the surface. Cover with primer.
Apply and dry base coat.
Apply a layer of pigmented gel polish, dry it in a UV lamp.
Apply a layer of transparent gel polish (do not dry).
We take the foil, put a drop of dark gel polish on it. We drip a little clinser into a small container - to clean the brush. With a thin brush we create a drawing. Apply slightly curved lines, short and long, intersecting and any that can imitate the structure of the stone. After drawing each line, dip the brush into the clinser, and re-walk over it, lightening and diluting a little. The convenience of gel polish is that it does not dry out, so you don’t have to rush.
Dry the finished drawing.
Cover nails with top coat and dry under UV lamp.
Remove sticky layer.

Marble nail design gel polish- an option not for every day, but rather for a special occasion, for example, for a celebration or vacation at sea.

There are an incredible number of options for patterns and color combinations, so you can safely experiment.