Knitting pattern herringbone with knitting needles scheme and description. Joint knitting of the herringbone pattern with knitting needles. Knitting on the front surface of the openwork "Christmas tree"

herringbone pattern in a circle

Herringbone pattern in a circle, can be used for children's knitting, as well as for knitting various accessories. The herringbone pattern is one-sided, has a slightly springy texture and can and can be used as an openwork elastic band. Its scheme is very simple, and if you take a closer look, you will see that the pattern is based on the most common vertical zigzag. And the relief texture of the pattern is formed due to yarns and loops knitted together with an inclination in different directions.

circular herringbone pattern

Description and scheme of the herringbone pattern in a circle: The report of the herringbone pattern is 6 loops and 8 rows in height. In order not to get confused in the pattern, when knitting in a circle, mark the beginning of each new row with a marker. Be sure to follow the slope of the loops knitted together, the quality of the pattern depends on this.

2nd row: * 2 persons., 2 persons together. with tilt right, nakid, 2 persons. *;

4th row: * 2 persons together. with tilt right, yarn over, 4 persons *;

6th row: * 2 persons., nakid, 2 persons together. with an inclination to the left, 2 persons. *;

8th row: *k4, yarn over, k2tog. tilted to the left*.

If you need to knit a pattern on straight knitting needles, use the following diagram. Its main difference from the previous one is the presence of purl rows, and, accordingly, purl loops knitted together.

herringbone pattern diagram

Pattern report 6 loops, both front and back rows are indicated on the diagram. Knit the front rows according to the scheme from right to left, and the wrong ones from left to right. Repeat the pattern from the 1st to the 8th rows.

Herringbone pattern for straight knitting:

1st row: * 3 persons., 2 together with a slope to the right (behind the front walls), yarn over, 1 persons *, repeat the pattern from * to * to the end of the row;
2nd row: * 2 out., 2 together out. cross., yarn, 2 out. *;
3rd row: * 1 person., 2 persons together. with tilt right, yarn over, 3 persons. *;
4th row: * purl 4, yarn over, purl 2 together. cross*;
5th row: * 1 person., nakid, 2 persons together. with a slope to the LEFT (remove 1 p. without knitting, knit the next loop with the front one and stretch it through the removed p.), 3 persons *;
6th row: * 2 out., 2 together out., nakid, 2 out. *;
7th row: * 3 persons., nakid, 2 persons together. with an inclination to the left, 1 person. *;
8th row: * purl 2 together, yarn over, purl 4 *.

We bring to your attention a master class on knitting the herringbone pattern. This pattern looks like a fabric called "tweed". If you knit with thick yarn and thick knitting needles, then the knitted product turns out to be very dense and warm. Suitable for knitting coats, jackets, cardigans.

Video master class on knitting the herringbone pattern with knitting needles:

Description of the process of knitting a herringbone pattern with knitting needles:

The number of loops can be any.

1 row: edge, knit 2 loops together with the front loop behind the back wall of the loop, then only one loop out of two is dropped from the left knitting needle, the second loop remains on the knitting needle. Then it is knitted with a new loop 2 together with the front behind the back walls and one loop is dropped from the left knitting needle. The second remains, for knitting the next 2 loops. Thus, we continue knitting until the end of the row. At the end of the row, we have one loop left, we knit it with the front one.
2 row: similar to 1, but there we knitted facial loops, and in this row we purl. Edge, we knit 2 loops together with a purl loop, then only one loop is dropped from the left knitting needle, out of two, the second loop remains on the knitting needle. Then it is knitted with a new loop 2 together with the wrong one and again one loop is dropped from the left knitting needle. The second remains, for knitting the next 2 loops. Thus, we continue knitting until the end of the row. At the end of the row, we have one loop left, we knit it with a purl loop.

We knit the remaining rows, repeating the 1st and 2nd row.

We hope everything worked out for you.

Even, you, loops.

We are waiting for your comments.

The herringbone pattern is one of the most versatile knitting techniques. It is suitable for all wardrobe items, from mittens to coats, goes well with other patterns, can serve as a good background for decorative elements, and with the right choice of size and color scheme, creates a self-sufficient geometric pattern. As a rule, this ornament is associated with winter things, but it also looks good in a light version of thin threads. There are several different options for knitting a herringbone pattern with knitting needles, which differ in their complexity and delicacy.

Easy option

The easiest to make herringbone pattern is a one-sided pattern that resembles tweed fabric. A description of this technique can be seen below.

When using thick threads with this pattern, you can knit a dense warm scarf or hat, it is great for knitting sweaters and coats.

If you want to complicate the task a little, you can use threads of several colors, a gradient looks good on this pattern, as well as vertical or horizontal contrasting stripes. A distinctive feature of these "herringbones" is the use of any number of loops. Pattern repeat - two rows.

In the first row, two loops should be tied behind the back walls together with one front loop. Then one of these loops is removed from the knitting needle, leaving the second. Then, in the same way, you need to knit the next two loops, moreover, one of them is the one that remains from the previous pair. Thus, the entire first row is knitted.

In the second row, knitting continues in the same pattern, with one exception - two loops are tied together from the wrong side, and not from the front.

Oblique "herringbone"

This version of the pattern is also created using only front and back loops, but the pattern is double-sided in the end, so it is well suited for creating scarves and snoods. The rapport of this pattern is 10 loops and 20 rows. All even rows must be knitted according to the pattern, odd - in accordance with the scheme, strictly observing the sequence of loops.

In order to turn a scarf knitted in such a technique into a snood, it is imperative to knit the rapport of the pattern to the end, then when the ends of the product are connected, the “Christmas trees” will match. Snood should be connected with a knitted seam, which with such a pattern will be invisible.

Products decorated with such an ornament look strict and restrained, so the "Christmas trees" can be used in both men's and women's clothing.

Openwork option

The openwork "herringbone" looks better from thin threads, thanks to which the airiness and lightness of the pattern are preserved. This fabric is suitable for berets, light scarves, pullovers and cardigans. Pattern repeat - 18 loops and 12 rows. The second and all subsequent even rows must be knitted with ordinary purl loops. If you want to increase the "Christmas trees", their number can increase proportionally.

The “herringbones” in this pattern are formed by yarn overs and facial loops, the “trunks” form three loops knitted together from the wrong side, the remaining fabric is knitted from the wrong side. The "trunk" of each Christmas tree in rapport remains in one place - the tenth loop, and the "branches" form a triangle, tapering upwards.

The first row is knitted from one front loop, nakida, two front, five purl. Then three loops follow, knitted together from the wrong side, five more wrong ones, two front ones and one yarn over.

In the third and subsequent odd rows, the yarns are gradually, one loop at a time, shifted to the center of the rapport. In addition, the number of purl loops is reduced, the 11th row is knitted only with facial, crochets and three purl-related.

Difficult terrain

A more complex version of the pattern - embossed "Christmas trees" - is knitted on four knitting needles. Such a pattern is suitable for warm voluminous sweaters and hats; when knitting with thin threads, the pattern will not keep its shape. Rapport - 6 loops and 8 rows.

In the first four rows, the elements of the pattern will be tilted to the right, in the next - to the left, thus slightly beveled triangles will be formed. Knitting is done in a circle. On two knitting needles, you need to dial the number of loops in a classic set, a multiple of 12. The base is knitted with front loops, they are distributed over four knitting needles, while pulling up the loops so that they are more dense.

In the first row, three loops should be knitted, two more - crossed (behind the front walls). This is followed by yarn over and one simple front loop. After that, the rapport is repeated. In the second row, you need to tie two front ones, followed by two front crossed ones. Then you should make a yarn over and knit two more loops with facial ones. The third row starts with one face. Then - two together with one facial crossed (also behind the front walls). The row ends with one crochet and three ordinary facial loops.

In the fourth row, first knit two together for the front walls of the front crossed, then yarn over and knit four front ones. From the fifth row, the elements of the pattern should lean to the left. In this row, one regular knit is knitted, then a crochet is made, and after it two loops are knitted along with a broach. In order to tie such a loop, you need to remove the first one, knit the next front one (behind the back wall), and then reshoot the first of them through the second one. Next, three facial ones are knitted (each of them is already behind the front wall).

In the sixth row, two facial knit, make a crochet. After they knit two together with a broach, they complete a row of three ordinary facial ones. In the seventh row, you need to knit three facial ones, double crochet and knit two together with a broach. The row ends with two facial ones. In the eighth row, four knits are knitted, then a yarn over follows, two together with a broach, and the row ends with one knit. This completes the rapport. In the process of knitting on four knitting needles, you will periodically have to remove the loops from one to the other, therefore, when making this pattern, it is especially important not to get confused in the loops and not knock down the pattern.

Video on the topic of the article

Any needlewoman wants to improve and expand her knowledge in the field of applied art in which she is engaged. We invite our readers to master the Herringbone pattern using standard knitting needles. This option for designing a knitting fabric with the help of a pattern is available even for beginner needlewomen. We offer you to learn more about the process of creating such a versatile and simple pattern using knitting needles with your own hands.

The original and unusual herringbone pattern on the knitted canvas has a pattern similar to the fabric called "tweed". If you use threads with a thick diameter and thick knitting needles for knitting, then the fabric will turn out to be very warm and dense. This pattern is very well suited for knitting warm sweaters, jackets, cardigans, as well as coats.

We knit a herringbone pattern with knitting needles: a detailed and step-by-step master class

We bring to your attention a detailed and step-by-step description of the process of knitting a fabric with a herringbone pattern. Choose the right threads and needles for your product. Now you can start the process of knitting a fabric with an original pattern.

Type on the working knitting needles any number of loops. You can pick up a small number of loops on the surface of the needles to learn how to create patterns.

First row: edge loop, then knit two loops together with the front loop behind the back wall of the loop, then drop only one loop out of two from the left knitting needle, the second loop should remain on the knitting needle. Then knit the remaining stitch with the new stitch, knit 2 together behind the back walls and drop one stitch from the left needle. The second loop should remain, for knitting the next two loops. Thus, continue knitting until the end of the row of your fabric. At the end of the row you have one loop left, you need to knit it in the front way.

Second row: similar to the first, but there you knitted facial loops, and in this row you need to form purl loops. Make an edge loop, then knit two loops together using the wrong loop, then drop only one loop from the left knitting needle, out of two, the second loop should remain on the working knitting needle. Then you need to knit it with a new loop, purl two together and again drop one loop from the left working knitting needle. The second remains for knitting the next two loops. At the end of the row you have one loop left, knit it in the wrong way.

The remaining rows must be knitted, repeating the manipulations of the first and second rows of the fabric. Your herringbone canvas is now complete!

We bring to your attention a master class with a detailed knitting pattern for a double-sided herringbone pattern using knitting needles. In the diagram presented to you, both the front and back rows of knitting are indicated. Facial rows - from left to right, purl - from right to left. The pattern repeat is twenty stitches wide and twenty eight rows high.
For symmetry, before rapport, tie nine loops, after rapport, form ten more loops.

In patterns where yarn overs are required on the purl rows, knit two or three loops together. It is also necessary to follow the instructions for knitting these loops.
An empty cell is a facial loop. In the front rows of your knitting - the front loop, and in the wrong side - the wrong loop.
Two front loops must be knitted together with the front loop with an inclination to the right. Insert the needle into the second loop and the first loop, starting from the second loop, and knit them together.
In the purl rows, knit a loop with the same designation as two purl ones together with a slope to the left.
Knit two knit together with a slope to the left. Remove the first loop as with the front knitting method, knit the second loop with the front knitting method and pull the removed loop through it. In the purl rows, knit a loop with the same designation as two purl ones together with a slope to the right.
Knit three loops together with the front method with an inclination to the left. Remove one loop without knitting, knit the next two loops together behind the front walls, and stretch the resulting loop through the removed one.
yarn over

A selection of thematic video for the article

In order for you to create a herringbone pattern, we suggest you watch a selection of interesting videos. It shows a clear example of knitting and the step-by-step creation of the correct rows of a product with a pattern. After viewing and studying the materials in detail, you will probably be able to repeat the rapport pattern yourself. Enjoy watching!

If you decide to knit herringbone pattern, and try to find it on the Internet, then the worldwide search engine will give you a considerable number of samples and diagrams. And all because there is no single classic pattern under that name. Basically, these are openwork or dense patterns that are performed with alternating front and back loops, as well as yarns. Let's take a closer look at what a knitted herringbone pattern is.

Description of the execution of the pattern

This short workshop will show you how to knit a herringbone that looks like tweed fabric. If you use thick yarn and thick knitting needles in your work, then the fabric will turn out warm without any gaps. This knit can be used for jackets, coats and cardigans.

The most interesting thing is that when knitting such a Christmas tree, you can use a completely different number of loops. So, after you have dialed the links, you can get to work:

the first row begins with the edge stitch, then knit two stitches together in the front way behind the back wall, then remove 1 stitch from the knitting needle, which is in the left hand, and let the second one remain in place. Tie it together with the next link and drop one buttonhole again in the same way as the previous one. According to this scheme, continue to knit the pattern to the very end. At the end of the strip, you should have 1 st left, which is knitted. way;
The second row is almost identical to the first. The only difference is that before that we used faces. p., and now we will knit purl. As always, you need to tie the hem, then two joint out. P. Next, as in the previous description, remove 1 p., And leave the second on the left tool. Continue with the analogy. At the end of the row, knit the remaining one buttonhole inside out.

Video: Learning to knit a pattern

Knitting on the front surface of the openwork "Christmas tree"

The next Christmas tree is considered one of the simplest. It is used in knitting skirts and blouses, as it is done in person. smooth. The scheme and description will also be presented in the article.

You need to cast on loops, the number of which will be a multiple of fourteen plus two edge loops to form the edge of the canvas. Then knit all the stripes of the front of the product as shown in the diagram. When you turn the fabric to the wrong side, knit all the buttonholes in the same way, that is, from the inside. This also applies to wraps.

Pay attention to how the figure shows the performance of decreasing stitches. If the pattern is lacy, then it is very important to turn the links as shown in the detailed description. If this is not done, your ornament will not look beautiful and neat, and in some places even careless. Therefore, you will have to dissolve your sample and start over.

Pattern with alternating different loops

After you were able to master the previous knitted patterns, the next pattern will not be difficult or incomprehensible for you. A fragment of the canvas, which can be seen in the photo, is made of faces. and out. etc. and, of course, yarn, without which characteristic holes will not work. A feature of this pattern is that the Christmas tree itself is knitted not by persons. etc., as it was previously described, namely the wrong side, which is why it turns out so beautifully.

We have offered you some well-known examples for your consideration. And on their basis, you can make beautiful and openwork weaves with knitting needles, combining them with other patterns to create an absolutely exclusive product for yourself.