Knit scarf collar. How beautiful to knit a circular scarf snood with knitting needles? The easiest way

New 2017-2018

In pursuit of fresh trends of the autumn-winter season, many women of fashion choose for themselves and as a gift men's or women's snoods. Scarves can be simple or in the form of a "Mobius strip", which allows for a tighter fit around the neck. There is an option where the snood is not sewn into a ring, but is fastened with buttons, such accessories are distinguished by a small diameter.

Products in one turn have different lengths - they are put on the head in the form of a hood, or are provided exclusively for warming the neck. When choosing the first option, the pattern is drawn along the short or long side of the product.

How to knit snood with knitting needles? The knitting pattern depends on the type of yarn, thick products with embossed patterns and braids, mohair openwork designs, and models created in jacquard technique are in fashion. Fur and beads are used for decoration.

How to knit women's snood - patterns, patterns

pearl pattern

An excellent solution for a coat or jacket would be RicoCreative TwistSuperChunky light gray snood. The principle of rice knitting is based on the alternation of one person. and one out. loops, but the main difference from a single elastic band is the alternation of loops. Above the facial loops in subsequent rows, purl ones follow and vice versa.

Dimensions according to wearer's age:

From 3 to 5 years: 150 mm - width and 990 mm - length.

From 6 to 8 years: 180 mm - width and 1130 mm - length.

From 9 to 11 years: 200 mm - width and 1270 mm - length.

For adults: 220 mm - width and 1410 mm - length.

Material preparation:

Thread RicoCreative TwistSuperChunky (1 skein 100g) in light gray No. 004

For children from 3 to 5 years, 1 package is enough.

From 6 to 8 years: 2 packs.

From 9 to 11 years old: 2 packs.

Adults: 3 packs.

Knitting needles are straight with limiters 1 cm wide (No. 10).

Density: 15 rows and 8.5 loops = 100 * 100 mm.

Step by step instructions:

On the knitting needles, dial, based on the selected parameters 13 (15; 17; 19) loops and knit rows:

1 row (on the front): * 1 p. Stitch, 1 out. *, knit from * to * to * the end of the row, the last loop must be done front. Continuing knitting, repeat the 1st row, forming a moss pattern. Upon reaching 99 (114; 128; 142) cm, work should be completed.

Product assembly

Sew the short sides of the scarf. Place the snood on a flat, hard surface, for example, on a table where you need to spread a towel or sheet first. Place a wet washcloth on top. Leave until completely saturated with moisture. Remove the towel at the top and leave the scarf in a predetermined position until completely dry. Snood is ready to wear.

English gum

To work, you will need a thin woolen thread (50 g), knitting needles No. 9, scissors and a needle.

The first row is knitted according to the scheme:

One satin stitch, 1 thread thrown over, removing an unknitted loop. Repeat. So you need to knit the entire row.

When performing the 2nd row, it is required to throw on the thread, remove the loop without knitting, knit the loop and yarn over from the previous row together.

For the 3rd row, it is necessary: knit a yarn over with a loop from the previous row, throw on the thread, remove the loop, without knitting.

All further rows are represented by alternating the 2nd and 3rd rows until the specified height of the scarf-collar is reached.

To connect the beginning and end of the snood, many knitters prefer to leave the loops open on the last row. Putting the knitting needle with loops aside, you should use a hook and an additional knitting needle to collect the same number of loops from the beginning of the product. The result will be 2 knitting needles with loops at different ends of the scarf, pointing in the same direction.

The knitting needles are applied one to the other and with the help of the 3rd knitting needle, all the loops from the two working knitting needles are closed in order of priority. The resulting seam will have a thickness less than usual, but more reliable.

If you use several shades of yarn when creating a scarf, the thing will turn out to be more colorful and attractive.

Snood "Pink Ashes"

In the considered version, 2 types of knitting are used: “rice” and “braid”.

Knitting "rice":

1 row (from the front side): alternating 1 p. Stitch and 1 out. n. until the end of the row.

2 row (from the wrong side): according to the pattern.

Step by step instructions:

Having typed 129 loops, you should start 1 row from the front side. The sequence of loops: 20 purl, 8 facial, 20 purl, 1 stitch stitch crossed. Following is the “rice” pattern 1 by 1 by 2 (31 loops), 1 person. crossed and again: purl 20, facial 8, purl 20.

New row (wrong side): according to the pattern.

Next 5 rows: following the sequence of one front and back loop.

On the 8th front row, 20 purl loops are provided, 4 stocking loops are removed for additional. knitting needle before starting work, 4 l. loops, 4 l. loops with additional spokes. Then 20 out. loops, 1 front loop crossed, 31 loops according to the pattern "Rice 1 * 1 * 2". It remains to make 1 person. crossed loop, 20 purl loops, 4 l. n. remove for extra. knitting needle behind the product and knit 4 l. p., 4 p. stitch from the other knitting needle, 20 out. P.

Knit 15 rows, following the sequence of knit and purl.

Repeat rows for the specified number of times.

Spring scarf-snood

The pattern is created from a garter stitch and a braid based on long loops taken off.

Garter stitch requires all rows to be knitted.

For braiding from removed long loops, you need to dial 26 loops. The total number should be a multiple of 6 + 2 loops on the edges.

1 row is created from facial loops.

2 - from purl.

3 - all loops must be converted into each front with 3 turns. To do this, you need to enter the knitting needle into the loop from left to right, wind its end 3 p. to the right.

4 - remove, without knitting from the left to the right knitting needle 6 loops (next, after the edge), due to the turns they must be pulled out at the same time, then return 6 loops to the left knitting needle, and insert the right one into the 4th, 5th and 6th loops, pulling in height and stretching the first 3 loops in them. Then put 4-6 loops on the left knitting needle and pass 6 loops out. P.

5 row by analogy with the 3rd.

6 - knit 3 removed loops in turn out. p., * discard the turns, removing 6 loops on the right knitting needle, raise the first 3 p. with the front knitting needle and stretch 3 next loops through them (by analogy with the 4th row). The stretched 3 loops must be put on the left knitting needle again and go through 6 loops in turn. n. From * repeat until the end of the row. At the end of 3 rows, purl and edge loop.

7th row - repeat the pattern from the 3rd row.

Alternate placement of patterns or in compliance with a checkerboard pattern is allowed. Permissible length - 1 or 2 turns.

openwork patterns

small braid

Required:

Circular knitting needles No. 6, length 60 - 90 cm.

Threads 100 m per 50 g (6 packs).

Yarn needle.

Size: 950×350 mm.

Density: 14 pet. * 23 rows = 10x10 cm

Procedure:

Create 128 pet. (or 252 for circular knitting).

Row 1: *1 st in satin stitch, 1 st inside out, 3 sts in satin stitch, 2 sts inside out*. So knit to the remaining 2 loops. One of them to pass stocking stitch, the second inside out

Row 2: *1 st in st, 1 st inside out, 1 st in st, yarn over, 1 st in st, slip 1 st without working, 2 sts inside out, slip 2 purl through slipped st*, knit until 2 sts will not remain. Finish 1 st in satin stitch and 1 st inside out.

Row 3: *1 st in satin stitch, 1 st inside out, 2 sts in satin stitch, 3 sts inside out*. Follow the scheme until you get the remaining 2 loops. Finish 1 st in satin stitch and 1 st inside out.

Row 4: *1 st in stockinette stitch, 1 st inside out, slip 1 st. without knitting, 2 stitches, stretch 2 l.p. through the removed loop, 1 p., throw on the thread, 1 p. inside out *, pass until 2 loops remain. Finish 1 st in satin stitch and 1 st inside out.

Repeat 4 rows until a height of 350 mm is reached.

Finish the product. Join 2 halves if non-circular knitting is selected.

Hide the ends of the threads.

"Pink tenderness"

Materials:

100 g DropsVivaldi threads from Gamstudio (56% mohair, 14% wool, 30% polyamide, 280 m/50 g).

Hosiery needles: 3.5 mm (0.8 m).

Size: circumference 90 cm, width 400 mm.

Density: 20 p. * 28 rows = 100 * 100 mm. The number of loops in the rapport of the pattern changes in every second row - 8 or 9 pet.

Step by step instructions:

Dial in a circle. spokes 180 loops.
Knit 4 circles of boards. viscous (1 circle - all facial, 2 circle - all purl).
1 circle l. p., at the same time evenly decreasing 4 loops = 176 loops.
Apply the scheme when passing 9 vertical rapports (the resulting height will be 39 cm).
1 row in stocking st while decreasing 22 sts (knit 2 together every 7th and 8th st) = 154 sts.
Work 4 rows in stocking pattern. To finish work.

"Rhombus"

Dimensions: length 1340 mm, height = 275 mm.

Density: 17 loops * 28 rows = 100 * 100 mm.

Materials: 411 m of ManosSilkBlend yarn (71% merino, 29% silk, 138m/50g) - 3 packs; circle. knitting needles 5 mm, marker for knitting.

Procedure:

Knitting is done in a circle using a double-sided pattern. Cast on 224 stitches. Connect knitting in a circle, without twisting. Use a knitting marker to mark the 1st stitch of the round.

Pass 3 p. - all out.

Use pattern chart for circles 1-69.

At the beginning of each circle on the 23rd, 27th, 31st, 35th, 59th, 63rd and 67th, remove the marking of the beginning of the circle, return the last pet. circle on the left needle, change the marker, then put the removed loop on the right needle = schematically these cells are marked with a yellow tint. Knit 3 rows - all purl. Close all pet., as purl. Hide the thread.

"Herringbone"

List of materials:

Yarn LionBrand Superwash Merino Cashmere (72% merino wool, 15% nylon, 13% cashmere; 40g/80m) - 4 packs, shade Slate (slate).

Circle. knitting needles 5 mm, length 0.4 m.

Density: 17 p.

Round 1 and 3: garter stitch.

Circle 2: 1 l., * (throw a thread, 2 p. connect in one person with a slope to the left) - 2 times, 1 p. 1 p. Stitch, repeat from * in a circle.

Circle 4: 2 sts in satin stitch, * yarn over, 2 sts to connect in one person. with a slope to the left, yarn over, remove 1 st with a broach (remove 1 loop, knit the adjacent 2 loops according to the pattern, throw the removed loop on those already knitted), yarn over. Then connect 2 p. together into 1 facial. Throw a thread and dial 3 liters. n. Repeat from * to the last 9 loops. Throw a thread and 2 p. Connect in 1 front with a left bias. Yarn over and remove 1 p. with a broach, throw on a thread, 2 p.

Repeat from 1st to 4th row.

Product diagram:

Cast on 131 sts, mark the 1st st of the row with a marker and connect the work in a circle.

Knit a pattern.

Having received 23 cm, complete the work.

"Waves"

Dimensions: 157.5 cm long, 28 cm wide.

Knitting density: 18.5 loops * 17 rows = 100 * 100 mm

What to prepare:

Yarn A - 3 packs of IndulgenceByPrism yarn (68% silk, 15% wool, 12% mohair, 5% nylon, 84 m / 56 g);
Yarn B - 1 pack of GossamerByPrism (80% mohair, 20% nylon, 850 m / 100 g);
Yarn AB - two connected threads A and B;
Needles 0.5 cm.

The product is created using straight and reverse rows. Then you need to connect the first and last row. Yarn B will be used for sections B. Yarn B should be transferred after passing each row up.

How to knit:

With thread A, create 51 loops.

Row 1 (right side): knit to the pattern repeat line, repeat 2 rows, go to the end of the pattern.

Continue knitting up to 24 rows. Repeat rows 1-24 for another 10 p. You will get a length of 157.5 cm. Close the pet., Connect 2 halves.

"Small square"

Dimensions: circumference - 180.5 cm, height - 33 cm.

Material: 2 packs of Cascade Heritage Solids (75% merino, 25% nylon, 100g/400m). Needles number 4.

Density: 24 pet. * 28 row. = 100*100 mm.

Pattern scheme:

The number of loops is a multiple of 15, the rapport is designed for 15 rows.

1 circle (before) - * 1 p. Stitch, throw on the thread, 2 together with stocking stitch to the left, 9 p. Stitch, 2 together front to the right, 1 p. Stitch, repeat from *.

2 circle - out. P.

3 circle - * 2 stitches (throw a thread, 2nd decrease, yarn over, 1 l.) - 3 p., 1 stitch, repeat from *.

4 circle - * 1 p. inside out, 13 p. stitch, 1 out. p., repeat from *.

5 circle - go by analogy with the 3rd row.

6th circle - similar to the 4th row.

7 circle * 2 stitches, thread thrown over, 2nd decrease, thread on, 5 stitches and thread thrown over. Double decrease, thread over, 2 stitches, repeat from *.

8 circle - * 1 st inside out, 5 sts inside out, 3 sts inside out, 5 sts inside out, 1 st inside out. Repeat from *.

9 circle - similar to the 7th row.
10 circle - go like the 3rd row.

12 circle - like the 4th.

13 circle - like the 3rd.

14 circle - purl loops.

15 circle - “2 knit together to the right, thread thrown over, 11 stitch stitch, thread thrown over, 2 knit together to the left, repeat from *.

16, 17 and 18 circles - satin stitch.

Process description:

Cast on 81 sts (75 sts of the pattern and 3 sts for the rim on both sides).

Knit 6 rows with knit loops.

7th row: 3 sts in stockinette stitch, repeat the 1st row of the pattern 5 times in width, finish 3 sts. P.

Continue knitting with a pattern, adding 3 l. n. on both sides to obtain a handkerchief.

Repeat 1-18 rows of the pattern 26 more times.

Knit 3 rows of stitches.

Finish drawing.

Facial loops from faces. sides, purl with out. n. side.

Facial loops from the wrong side.

2 together to the right.

2 together to the left.

Double reduction.

Male models

"Network"

Options:

51 cm in circumference and 21 cm in height on small needles without elastic.

56 cm in circumference and 28 cm in height on large needles. These parameters are increased by adding 2 * 2 elastic at the edges. The description considers the option of a collar without an elastic band.

200 meters of DK or WORSTED yarn, based on 200 meters per 100 g. Pictured is Blue Sky Alpasa "Suri Merino", shade #418, Dusk.

Circle. knitting needles 4 mm and 5 mm thick, 0.8 m long. Additionally, you will need a knitting needle for a braid and knitting markers or bright threads.

Density:

24 stitches and 32 rows = 100*100 mm in stocking pattern on 4 mm needles.

20 loops and 24 rows = 100 * 100 mm, according to the pattern with braids on 5 mm knitting needles.

Definition of values:

LKb - remove 4 sts for additional. knitting needle before starting work, 2 l., then return 2 removed out. p. back to the left knitting needle. Knit them purl, then 2 l. n. with add. spokes.

PK6 - removing 4 loops on the auxiliary knitting needle in the process, 2 facial, returning 2 removed purl loops back to the left knitting needle and knitting them with purl, then 2 facial with additional. spokes.

K5Z - removal of 4 loops on an auxiliary knitting needle in the process of work, 1 l. p., returning 3 of the 4 stitches removed back to the left knitting needle, then (before the loops are knitted). It remains to transfer the auxiliary knitting needle with one loop forward between the used knitting needles to the left of the working yarn: 3 l. n. from the left knitting needle and 1 l. n. with add. spokes.

Braids 1 (pattern width 26 loops)

Row 1: 2 sts inside out, LK6, (2 sts inside out, 2 sts in satin stitch) twice, purl 2, PC6, purl 2.

Rows 2-6: 2 sts inside out (2 sts in satin stitch, 2 sts inside out) - 6 p.

Row 7: 2 out. sts, 2 sts in satin stitch, 2 sts inside out, LK6, 2 sts inside out, PC6, 2 sts inside out, 2 sts in satin stitch, 2 sts inside out.

Rows 8-12: repeat 2-6 rounds.

Knit rows 1-12.

Braids 2 (5 loops wide)

Row 1: K 5Z

Rows 2-6: 5 stocking stitch.

Repeat rows 1-6.

Step by step instructions:

Create 124 loops, connect in a circle.

First row: repeat 4 p.

Second row: knit row 1 of braid 1, then row 1 of braid 2. Go up 12 rows (1 repeat of braid 1, + two repeats of 6 rows of braid 2 each).

Knit 4 rapports of braid 1 (8 rapports of braid 2) = 48 rows.

To finish work.

Snood «Fishbone Snood»

Width: 250 mm.

Finished length: 600 mm.

To work, you need 300 g of Bulky yarn (100-120 m in 50g). Aran yarn (160 - 200 m in 100 g) looks good, provided that the number of loops is increased and knitting needles with a smaller diameter are used.

The size of the circular needles 6 and 7 mm. When choosing a larger needle size, a looser canvas is formed. To create a test sample, Schulana Merlana yarn (55m/50g) 6 packs was taken.

Basic actions:

Cast on 180 stitches on circular needle size 6mm, leaving a marker at the end of the row, connect the knitting and knit in a circular pattern.

Using knitting needles of 6 mm, you need to knit 6 rows with the order of the front and back rows (create a garter stitch).

1 row knit persons. n. Change knitting needles to 7 mm -1 row knit faces. on 7 mm needles.

To achieve a given height, the scheme proposed below will serve. Even rows must be knitted in a pattern.

1 row of faces. p. on knitting needles 7 mm.

Change needles to 6mm and knit 1 row of faces.

Knit 6 rows in garter stitch, alternating knit and purl, cast off.

Children's options

For children, snoods, scarves and collars, scarves made of thick yarn are ideal. They are also quite suitable for teenage girls.

Snood from very thick yarn

One of the proposed options is equipped with one button. The thread is very voluminous (80% acrylic, 20% wool, 100 m / 170 g).

Below is a skein of very thick yarn:

To eliminate errors in the calculations, you should dial 20 loops, having previously selected knitting needles with a thickness of 9 mm. After the 10th row, the number of loops in 100 mm should be calculated. So it will turn out to find out how many loops are required to achieve the desired length.

Material preparation:

Bulk threads - 1 skein.

Hosiery needles - 9 mm.

Button - 1, width 2 cm.

Buttons - 3 pcs.

The product has a width of 22 cm, a length of 66 cm. Initially, you need to dial 65 loops on the knitting needles, then knit with circular knitting needles, since knitting is carried out in width. In the absence of circular knitting needles, you can use the usual ones, but you get a tight knit. Having typed 65 loops (it is possible to change the quantity, based on the type of yarn), it remains to knit 15 rows of facial ones. After closing the loops, you will need to sew on a button and buttons from the inside.

Material blanks:

Thread - 1.5 balls.
Buttons - 4 pcs.
Buttons - 4 pcs.

Brief instruction:

Throw 22 loops on the knitting needles and knit 8 rows of facial ones.
9 row: facial.
10 p.: out. P.
11 p.: 22 out. p. + nakid.
12 p.: 23 persons. P.
13 p.: 23 out. p. + nakid.
14 p.: 24 out. etc.

Add until 33 loops are typed. For the lapel, you can use garter stitch or 2/2 elastic as the bottom of the snood. Knit up to 48 rows, which will allow you to get closer to the middle of the product, and then knit in a mirror image. It is important to track the symmetry of both halves. Close loops. Sew on buttons and buttons from the inside.

Snood clamp

The pattern is based on the alternation of front and back knitting. The resulting product can be worn down, around the neck, under a jacket, or over a hood. Especially the product is worn well in the winter season, since during severe frosts the lower part of the baby's face will not freeze.

Below is a knitting pattern:

The list of materials includes:

Wool Baby Wool (200 m / 50 gr.) - 2 balls.

Hosiery needles 4 mm. You can use simple ones (3.5 mm), then sew on the canvas.

When using knitting needles with a diameter of 3.5 mm, an increase in their number is required. The resulting product will have a width of 52 cm, a height of 24.5 cm. You can increase the parameters after trying on.

Scheme for a set of 80 loops:

1st and 2nd row: 1 st in satin stitch, 1 st inside out, 1 st in satin stitch, 1 st inside out. Repeat until the end of the row.

3rd and 4th row: 1 st inside out, 1 st in satin stitch, 1 st inside out, 1 st in satin stitch. Repeat until the end.

Then repeat as in row 1. A tangle pattern is formed. When using circular needles, you need to mark the beginning of the row with a pin. Next, you need to continue knitting to a given height (can be measured with a ruler or meter). The collar is knitted to a height of 21 cm (58 rows), and then you need to dial an elastic band 2/2 (2 facial, 2 purl) another 3.5 cm (7 rows). At the end of knitting, it remains to close the loops.

Long scarf

Scarves or shawls with long stripes are the hit of the season. The stripes are sewn to the product at the end of the work. They can be thin or wide. The ends are decorated with tassels or pompoms.

To create brushes, a cardboard of the given parameters will serve, where you need to stretch the thread on top and wind the yarn. The splendor of the brush depends on the amount of thread. Then you should pull the top thread tightly and make an additional tie lower, also tighten. Trim the bottom of the brushes with scissors.

To create a scarf, use the usual garter stitch, knitting needles will be required with a thickness of 9 mm.

Loops to dial, as on a garter stitch. For a scarf, light gray yarn with white stripes will serve. Thread - wool mixture (50% wool, 50% cotton).

The thickness of the spokes is 8 mm. 10 cm of knitting = 13 loops / 16 rows. Dial 6 loops on the needles and knit, adding 1 loop in all rows. Knit with increments to the row where there are already 22 loops. Further width is kept at 22 loops, with the addition of a white thread after 10 rows. Then - use a light gray thread to a given length. Having decided on the center of the product, you should continue knitting in a mirror image. Finish the scarf with 6 loops, add a pompom.

Collar scarves or, as it is now fashionably called, snoods, are very warm, versatile and quite comfortable things. They can be worn any time of the year when it's cool. This applies to late autumn, and early spring, and cold winter. How does the knitting of the collar, we learn from the article.

We knit and wear

Undoubtedly, it is absolutely not necessary to knit such a scarf yourself. You can simply buy it in the store, where the attention of buyers is provided with models of different colors and styles.

And yet, some women want to at least sometimes be a home needlewoman, so that knitting a collar with knitting needles brings not only a new thing to the wardrobe, but also the pleasure of the fact that the accessory is knitted with one's own hands. Indeed, such an act is very correct, because by creating on your own, there is an opportunity to satisfy your taste and even express yourself.

We wear it right

Knitting collars of scarves-snoods is carried out in three ways:

A strip sewn at the very end of the work.

2. A regular strip, in which the parts are connected with buttons.

3. Seamless collar - when knitting, circular knitting needles are used.

So, knitting a scarf collar is behind. Now one question remains: how to wear it correctly. Such a fashionable modern accessory should be combined with the color of a bag or shoes. You can wear almost everything with it: skirts of various styles, and familiar jeans, and even classic trousers. With all things, the collars will look very harmonious.

Collars can be decorated with beads, brooches, sequins. And potential buyers can only choose what they like.

Important differences

At first glance at such scarves, it seems that they look exactly the same, in fact, they do not differ in anything. But is it really so? The most important distinguishing feature is the size. There are scarves that are usually worn for a couple of turns. The first turn pounces on the head, but the second - on the neck. There is also an option in which it is envisaged to wear only one girth, if the size of the scarf does not make it possible to do it differently.

But even in single-turn options there are differences. The knitter knits her product as a simple straight scarf, and after finishing work she sews it with a knitted stitch into a ring. If the seam is not welcome, then you need to knit a scarf collar around. When using the first method, you can choose both the short and long sides of the scarf.

And the threads with which such a scarf is supposed to be knitted are of different composition. You can choose a thick and soft yarn, which will make a relief pattern with braids. If you take mohair, you will get a cobweb out of it. For some models, jacquard technique is chosen in a circle. In this case, the clamp is obtained without purl strips.

We knit for men

Knitting a collar, intended for representatives of the strong half of humanity, is now quite a fashionable activity. On guys, such products look very impressive due to the laconic colors and simple patterns.

Those who consider themselves to be minimalists prefer these scarves for their simplicity and ease of use. Those who consider themselves modern men will never refuse such an accessory. After all, this is in a sense a prestigious thing that allows you to notice that its owner keeps up with the times.

Let's figure out how it should be carried out (collar-scarf), which has recently been so popular both among young people and among the population of mature age.

Stages of work

How to knit a scarf collar for men using any pattern? We need knitting needles number six and seven for work, we need to have about 300 g of yarn. 180 loops are typed on knitting needles number 6 (circular), at the end of the row you must definitely put a marker. Now knitting can be connected and knitted in a circle. On such knitting needles it is necessary to knit six rows, constantly alternating: a row of purl loops, a row of facial loops. It turns out a garter stitch.

Knit one row with facial loops. Next, knitting needles No. 7 come into play. One row is knitted on them. Now the scarf can be knitted according to any chosen pattern up to the height that is needed. Even rows should be knitted strictly according to the pattern.

Next, knit one row with facial loops using knitting needles No. 7. Change to knitting needles No. 6 and knit a row with facial loops. Six rows that come later, you need to knit, doing in turn - a row of facial and a row of purl loops (this is a garter stitch). Now you need to close the loops. The scarf is ready.

For lovely ladies...

Knitting a collar for girls and women involves an almost endless choice of various patterns and, in fact, knitting options. Here is one of them. For work, the craftswoman will need 50 g of yarn and circular knitting needles No. 5 (their length should be one hundred centimeters).

241 loops are cast on the knitting needles, everything is in a circle, and then it is knitted according to the scheme:

first row - only facial loops;
second row - knitting two loops together with the front one (the right loop should go over the left one), yarn over *, repeat in the same way from * to * until the last loop, one front;
third row - all loops are purl;
fourth row - we make one front, yarn over, remove one loop not knitted, one front, throw on the knitted loop removed *, repeat from * to * until the end of the loops on the knitting needle.

All the rest of the work consists in knitting rows to the width that the craftswoman needs.

For beginner knitters

Not all ladies who pick up knitting needles are craftswomen with considerable experience. But they will also want to join modern fashion, decorating themselves with a fashionable accessory today. Knitting a collar, the description of which will be given below, will take just a few days, and the work will not be difficult.

Such a collar is knitted with a viscous garter because the pattern is simple, and plasticity is increased. The upper part of the pipe will fit snugly around the fashionista's neck, and the rest of the pipe will lie fan-shaped on her shoulders.

After the set of loops is completed, you can start knitting the first row. Edge loops are marked separately. They should be knitted very carefully, so that later, at the end of the work, do not trim the edges of the snud. When the strip is already made in garter stitch, you need to leave the last loop and knit it inside out.

Now the product must be turned and removed on the right knitting needle the first loop without knitting. Keep going. Knit the last loop in the same way - purl. After the product is knitted to the required length (everyone here can choose what they need for themselves), close the loops like this: pull the next loop through the one on the knitting needle.

This illustrative example shows that knitting collars can be quite simple. The job description will give a detailed explanation of how and what should be done. And in the end you get a beautiful and comfortable accessory for any outerwear.

We knit for children

How to knit a collar with knitting needles? The knitting pattern for such a scarf for children is very simple. A beginner knitter can handle it. In addition, such a scarf will even be useful: if the child is fidgety, he will not be able to take it off himself, therefore, he will be protected from cold winds. And if mom knits such a collar in the colors that the baby loves, it will be a great gift for him. By the way, not all kids love pompoms and strings. In the case of a clamp, these problems will not arise.

If we consider a snudik with a girth of 72 cm and a height of 23, then only one hundred grams of yarn consisting of viscose, merino wool and polyamide, circular knitting needles No. 5.5 and 6 (their length should be forty centimeters) will be required for work.

The elastic band with which part of the scarf will be connected is the most common - in turn, you need to knit a pair of front and the same number of wrong ones. The scheme of the main pattern is also simple.

First row: five facial loops, one purl; so knit to the end.
Second: everything is the same, only you need to shift one loop to the right, that is, from the beginning of the row it will be like this - four facial, purl, five facial, purl, facial.

Third row: again we shift by one loop: three facial, purl, five facial, purl, a pair of facial.
Fourth: two facial, one purl, five facial, one purl, three facial.
Fifth: facial, purl, five facial, purl, four facial.
Sixth row (last): purl, five facial, purl and five facial.

In this pattern, the number of loops is a multiple of six. Repeat from the first to the sixth round of knitting all the time. One hundred loops are cast on circular needles number 5.5, closed in a ring and the beginning of the circular row is marked. Then you need to knit three centimeters with an elastic band, and in the last row evenly add two loops. In total, one hundred and two loops are obtained.

We pass to circular knitting needles at number 6. The work continues with a diagonal pattern. So you need to do seventeen rapports. After knitting twenty centimeters from the initial row, again go to the previous circular knitting needles and knit with an elastic band. In the first row, you need to evenly reduce all knitting by two loops so that you get 100 loops.

When three centimeters are connected from the beginning of the gum, it is necessary to close the loops according to the pattern. Now it has become clear that knitting collars, scarves, snoods is not such a difficult thing as it might seem at first. But the result is sure to impress.

Knitted snood with knitting needles will be an excellent decoration for an autumn or winter look.

The snood scarf has been a popular piece of clothing for several seasons now. This kind of scarf adds to the image of femininity and sophistication.

Now many women will want to go shopping to buy this accessory for themselves.
But with each new autumn or winter look, you will need to wear a new scarf. It is expensive to buy many models of snoods, and it is not always possible to find what you need in the store.
Therefore, it is worth knitting or knitting a new thing for yourself, which will become a favorite thing in the wardrobe, and will perfectly replace the headdress.
When you learn how to knit snood with a simple knit, you can create a more complex and original masterpiece of the autumn-winter look.

How to knit a snood with knitting needles for a woman: new models with a description

Of course, every woman will want to create a novelty, or knit a product that no other lady has. You need to buy yarn of an interesting color, knitting needles, and choose a unique model from those that will be offered below.

So, how to knit a snood with knitting needles for a woman: new models with a description:

Zigzag elastic band looks very interesting. Knitting such a collar is easy, you will need 350 grams of soft yarn and knitting needles No. 3.

To knit such a scarf collar, follow these steps:

First, determine how many loops you have in 10 cm of the knitted pattern. The total length of the snud will be approximately 150 cm. Now calculate how many loops you need to cast on. Type on the circular needles the required number of loops, a multiple of 3 plus 1 more loop.
1st row - knit 1 loop inside out. Then cross to the left: with the right knitting needle at work, knit the second loop on the left knitting needle with the front stitch behind the back wall. Knit the first stitch and slip both stitches off the left needle. Knit like this until the end of the row.
2nd row - 1 front loop. Now cross to the right with purl loops: with the right knitting needle, before work, knit the second loop on the left knitting needle inside out, leaving both loops on the knitting needle. Knit the first stitch inside out and slip both stitches off the left needle. Knit in this pattern to the end of the row.
Now repeat the 1st and 2nd rows. Get a zigzag elastic band.
Knit in this pattern to the desired width of the snood, close the loops.
Sew the edges - the original scarf collar is ready!

Video: Gum knitting Zigzag. Knitting patterns.

Braid pattern allows you to create a beautiful and comfortable thing with your own hands, which will perfectly complement any image. With such a snood, you will always be on the wave of fashion!

How to knit a snood with knitting needles for a woman - a braided pattern

Follow these steps:

Calculate how many stitches you need to cast on in 150 cm of knitting, knitting 10 cm of the pattern.
Cast on the required number of loops. Now work 3 sts in stockinette stitch, 5 sts in purl, 3 sts in stockinette stitch again. Rapport of the pattern: 5 - inside out on the front side and front side on the wrong side, and 3 - front side on the front side, inside out on the wrong side. Repeat the pattern to the end of the row.

Here is a detailed knitting pattern for the Braid pattern:

How to knit a snood with knitting needles for a woman - a diagram

Video: Knitting: Braid Pattern

Faceted gum - this pattern allows you to make the product voluminous, warm and beautiful. Such a snood can be worn both over a sweater and over a winter jacket. Even if you are a beginner knitter and knit slowly, you will complete this snood quickly.

How to knit snood with knitting needles for a woman - faceted elastic pattern

Knit these rows:

If you want to put on a collar without wrapping yourself several times, then its circumference should be 80 cm. If you want to make a chic snood so that you can wrap it around your neck 2 or 3 times, then you need to knit 120 cm or 150 cm of such a scarf. Calculate how many loops you get in the required length by knitting 10 cm of the pattern.
Cast on the desired number of stitches, a multiple of 4.
1st row - purl 1, knit 3 - continue to the end of the row.
2nd row - knit 1, purl 1, knit 2 - continue to end of row.
Now alternate the 1st and 2nd rows.

The trim in this collar can be a braid pattern. It is easy to knit - 3x3 or 4x4, crossing the knitting needles from the front side, and knitting according to the pattern from the inside. If you have never knitted such a pattern, watch the video.

Video: We knit a decorative braid with knitting needles. How to knit a braid or harness pattern?

Women are very capricious, they always want something refined and luxurious, especially when creating their image.

An openwork pattern is an original type of knitting that will perfectly decorate any wardrobe item, especially when it comes to sweaters, shawls or snoods. A scarf with openwork emphasizes beautiful facial features, rejuvenates and adds freshness to the image.

Openwork snood with knitting needles - knitting patterns, new items:

Collar with an interesting openwork pattern in gray. If you wish, you can add such a snood with a hat - an interesting and fashionable set.

The knitting pattern for this pattern is simple:

Knit on the front side and purl on the wrong side.
To make an openwork, knit 1 yarn over, and slip 1 loop, as if from the front, every 3 loops.
At the beginning of the rapport, remove 1 loop as a front one, then knit 2 front ones together and throw the removed loop on the wrong side. The pattern continues to the end of the row.

The hat is also knitted according to diagrams A1, A2 and A3. Work 5 cm in garter st first, then in 19-20 cm pattern.

Below are a few more schemes for creating the most delicate openwork snoods:

Pink snood cape - a gentle addition to the image.

white collar which adds solemnity and sophistication.

When a woman stands at a crossroads and needs to make a choice, she is always at a loss. Also when choosing a pattern for a knitted snood, because there are so many models and patterns - what will suit this or that image, how to tie it to make it beautiful and stylish?

So, we knit snood with knitting needles: which pattern to choose, schemes? Pay attention to these models:

Fashionable gray snood with a button on the cuff . Suitable for any autumn look. The knitting pattern is simple: 7 cm - elastic band 2x2, 12 cm - front surface, and again 7 cm - elastic band 2x2. The cuff is knitted with the front stitch, size 7x10 cm.

Snood with knitting needles with a pattern of original blackberry cones . Attracts attention if you combine with a coat or raincoat. Knitting pattern is simple: Knit the 1st row with purl loops, start knitting the 2nd row with bumps - 3 loops together with the wrong side and so on until the end of the row. 3rd row knit with purl loops. 4th row - 1 front loop and then 3 loops together inside out. Repeat this pattern until the end of the knit.

Hit of the season - bactus-snood . Knitted on circular needles. First, short rows go with the wrong side, then with the front stitch.

Pattern-scheme of how to knit a bactus collar, but with a slightly different pattern:

Video: How to tie a bactus. Bactus knitting needles. Triangular scarf or shawl.

If you need to quickly knit a beautiful snood, then choose a "pearl pattern". The product will turn out to be stylish and feminine, it will decorate the face and image as a whole.

How to knit snood with pearl pattern? To do this is simple:

Dial the desired number of loops
1st row - 1 edge loop, then start alternating - front, back and so on until the end of the row
2nd row - 1 edge loop, then alternate - purl, front
The 3rd row is repeated as the 1st, and so on until the end of knitting.

Pearl pattern scheme:

Knitting snood: pearl pattern - scheme

Important: You can make a larger pearl pattern (2x2 or 3x3). But in this case, you will need more concentration so as not to mix up the loops. Above the purl loops should always go facial, and above the facial - purl.

Video: Pearl pattern small and large

The pattern "Spit" is able to knit every needlewoman, even a beginner. Therefore, you will not surprise anyone with related things with such a pattern. I want to create something beautiful and special.

Hat and snood with interesting braids - a diagram with a description:

A cap

Calculate how many loops of the pattern will be in 10 cm of knitting. You need 54 cm of knitted fabric for a hat, and 150 cm for a snood. Cast on the required number of loops for a hat on circular knitting needles.
Knit 5 rows in purl stitch.
6th and 7th rows - facial loops.
8th row - cross 10 loops to the left: remove 5 loops on the auxiliary knitting needle before work, knit the other 5 loops, then knit 5 loops from the auxiliary knitting needle with the front stitch. Next 5 stitches in stockinette stitch. Then repeat the pattern to the end of the row.
9th and 10th rows - knit facial loops.
11th row - 5 loops of the front loops, then cross 10 loops to the right: remove 5 loops on the auxiliary knitting needle at work, knit the next 5 loops with the front stitch, then knit 5 loops from the auxiliary knitting needle with the front stitch. After that, 5 stitches in stockinette stitch and continue to the end of the row.
Knit the next rows according to the 15 cm pattern, and then start skipping loops and knitting 2 loops together according to the pattern.

Snood

Cast on the required number of stitches on the needles.
Knit according to the pattern, like a hat, starting with two front rows at once.
At the end of knitting, close the loops - the product is ready.

Braids and Harnesses are the most common pattern used to create knitted items. Snood associated with the use of such patterns can be associated in different ways: with one braid and a tourniquet, with several of these patterns, in combination with pearl and other patterns.

If you are a beginner craftswoman, then you need to knit simple patterns. Snood knitting with braids and plaits - a diagram with a description:

You can make such a pattern with a combination different braids and flagella . It will turn out a beautiful snood - warm and dense.

More simple braids in combination with front and back stitch.

The dimensions of a full-length snud with such a pattern should be no more than 80 cm - 120 cm. It should be worn in one or two turns - no more, otherwise it will turn out to be too thick and uncomfortable scarf.

See how to knit a snood with the Braids and Harnesses pattern in the following video.

Video: How to knit a scarf-snood with knitting needles? Double knitted scarf-snood with knitting needles. Knitted scarves with knitting needles

The pattern "Scythe with a shadow" or "Royal braid" was invented for several seasons ago. Since then, this pattern has been the most popular for creating knitted items: cardigans, scarves, hats and snoods. A collar with the use of such a pattern turns out to be voluminous and warm.

The diagram shows the front and back loops. To make a weave, swap the loops. To do this, prepare an additional knitting needle. Snood knitting braid with a shadow - a diagram with a description:

Cast on the required number of loops.
from the 1st to the 5th row, knit as follows: 5 loops inside out, 8 loops in front stitch, 10 loops inside out and so on until the end of the rows.
Now start knitting braids according to the pattern: 5 loops inside out, leave 4 loops at work, knit 5 loops with the front surface, then knit the removed loops from the auxiliary knitting needle with the front surface.
Repeat 5 rows again, as from the 1st to the 5th row, and then again knit according to the pattern.
When knit to the end, close the loops and sew the snood.

Video: Knitting pattern "Braid with a shadow"

There are many double-sided patterns, so you can choose any that you like. For example, a simple diamond pattern is beautiful and unusual. Knit a snood with a double-sided pattern with knitting needles - a diagram with a description:

The size of a snud of such knitting can be from 150 cm to 200 cm, so that it can be wrapped several times. Knitting is double-sided and not bulky, so it will turn out interesting and stylish.
Type on the spokes the number of loops, a multiple of 9.
1st row - knit 2, purl 5, knit 4, repeat further along the pattern. Last 7 sts: purl 5, knit 2.
2nd row - purl 1, facial 7, purl 2, repeat to the end of the row according to the figure. Last 8 stitches - knit 7, purl 1.
3rd row - purl loops.
4th row - repeat the 2nd row.
5th row - repeat the 1st row.
6th row - purl 3, facial 3, purl 6, repeat according to the pattern. Last 6 stitches - knit 3, purl 3.
7th row - knit 4, purl 1, knit 8, repeat to the end of the row. The last 5 loops - 1 purl, 4 facial.
8th row - repeat the 6th row.
Next, from the 1st to the 8th rows, repeat according to the pattern.

How to knit a snood collar - a circular scarf with knitting needles?

Many experienced craftswomen come up with patterns on their own when creating knitted items. See the models as you can knit a snood collar, a circular scarf with knitting needles:

Beautiful model with "harnesses" and knitted braid , which is inserted into the elastic band with a 2x2 pattern.

Openwork snood made of light yarn with voluminous "royal braids" - beautiful and stylish.

Easy combination of knit and purl stitches , and how beautiful the snood looks!

"English gum" and finishing from "Kos" - an unusual snood with elements of simplicity and luxury at the same time.

Yarn with sectional dyeing when knitting creates a fantasy texture. When knitting with such yarn, the craftswoman does not know what she will succeed, but this is the whole secret. However, it always turns out beautifully and in an original way, because these are threads that are dyed in a special way.

Snood with knitting needles from sectional yarn - a diagram with a description:

Often, needlewomen knit scarves and snoods without a pattern from such threads: front or wrong side. After all, you still get a beautiful texture and color scheme.
The sizes of such a snood can be very diverse: from 80 cm to 200 cm. If you want to wrap yourself in a warm collar in winter, then you should make a long scarf.
After knitting, sew a snood, wash it and you can safely wear it.

Patterns "Leaves", "Large braids and plaits" - all this helps to create interesting snood collars and scarves. Against the background of such knitting, the face looks miniature and beautiful.

Large knitting snood - a diagram with a description:

Important: The size of a snood of such knitting should not be large - 80 cm or longer, but not more than 100-120 cm. Otherwise, you will not be able to wear it, it will not be comfortable.

Here are some more models of snoods with a coarse knit “Braids” pattern.

Large knitting snood - stylish and original

Snood model made of thick yarn with one scythe at the bottom.

The voluminous snood with the “Royal braids” pattern looks the most beautiful. The scheme and description of the knitting of this pattern is above. If you want to tie the collar with another three-dimensional pattern, then pay attention to the models below.

Volumetric knitting snood - a diagram with a description:

Knit a "bump" from 6 loops, turn the knitting over and thread the 2nd loop through the 6th until 1 loop remains. Knit "braids" as described above.

These "Scythes" are knitted with hands, not with knitting needles - in a peculiar and eccentric way.

So you can make such “braids” - the wrong side with skipping loops in the rows.

Volumetric knitting snood - braids "loop"

Two-tone voluminous snood with autumn colors - unusually stylish!

Snood voluminous with knitting needles - voluminous and bright!

Video: Scarf-pipe, knitted snood. Knitting for the winter volumetric scarf. Knitting(Hobby)

The trumpet scarf was in fashion back in the 90s of last year. But so far it has not lost its popularity. Fashionistas of our time knit such snoods of different models and colors to decorate their autumn or winter look.

Snood pipe with knitting needles - a diagram with a description:

Tie yourself one pink scarf , and wear over a coat or jacket. It will warm in the cold and add delicate colors to the image.

Snood hood with knitting needles - knitting patterns, sizes

The hooded scarf is very comfortable to wear in autumn or winter. The hood does not fit snugly to the head, and therefore will not spoil the lady's hair, especially if she has a beautiful styling. Therefore, every woman should have such a snood hood in her wardrobe.

Stylish scarves-hoods with knitting needles - knitting patterns, sizes:

This turquoise snood in full length is 2 meters and 40 cm in diameter. If you wish, you can knit a bag - you get a beautiful set.

Snood hood knitted from melange yarn

Video: Snood with a hood (Peluzzo)

Knitting mohair snood - knitting pattern

Knitted things from mohair are warm, soft and gentle. Wearing them is a pleasure. Therefore, mohair has been valued since ancient times by women all over the world.

Knitting snood from such threads is easy. White mohair snood is associated with the use of "horizontal hemstitching". The remaining rows are knit and purl loops. The "Merezhka" pattern is knitted like this:

Knit 2 rows with purl stitches and 2 rows with knit stitches.
Now knit 2 stitches together and yarn over. Repeat this until the end of the row.
The pattern is repeated until the end of knitting.

Interesting mohair snood patterns with knitting needles - knitting pattern:

The mohair front is simple but stylish.

Knitting mohair snood - diagram

Openwork pattern of fine mohair - gentle and noble. Any openwork pattern can be knitted from such threads.

Openwork snood from mohair with knitting needles - knitting pattern

"Snood-loop" with ties also connected with the front stitch - original and unique.

Snood from thin mohair with knitting needles - knitting pattern

Snood with English rib knitting - description

Snood, connected with the "English gum" pattern, looks spectacular and bright. It seems that nothing unusual is a simple scarf, but at the same time it attracts the eyes of others.

English rib can be knitted in the usual way or made in a wavy effect. Snood with English rib is knitted with knitting needles in a single fabric in full length (150 cm - 200 cm), and then the edges are sewn together. Description of knitting a simple and wavy "English gum":

Video: How to Knit an ENGLISH GUM with Knitting Needles? Knitting for Beginners

If you do not want to part with the original image in the summer, then tie a snood for the warm season. To do this, use cotton threads or special melange yarn. The pattern for knitting can be anything, as long as the threads are soft and thin.

Summer snood with knitting needles - a diagram with a description, dimensions:

Summer snood from colored melange yarn. Great for spring and summer. The fabric is knitted from the front or wrong side, as you like. The edges are sewn together with a needle and thread.

Multi-colored snood made of thin threads of acrylic and a small percentage of wool. An interesting gradient texture is created by special threads. Such a snood will warm you on a cool summer evening; you can throw it over your shoulders over a dress or T-shirt.

Snood with knitting needles is easy and simple to knit. You can create several models on your own, so that later you can wear them with different things and sets of clothes.

Video: 15 Summer Cotton Knitting Snood

In this article we will tell you what should be the standard snood length in two turns , let's also talk about the comfortable width of the product and the consumption of yarn for it.

At first glance, it seems - what could be simpler than a snood, a simple product resembling a pipe around the neck? However, many knitters have problems making it. First of all, in calculating the optimal length and width of this important thing for the cold season.

The length of a snood in two turns for an adult: what we started from

Having considered, having studied a wide variety of descriptions and recommendations for knitting, we came to the following conclusion. The most popular and comfortable size of a snud in two turns for an adult ranges from 140 to 170 centimeters long, 25 to 50 centimeters wide .

Such a product not only looks beautiful, it is also comfortable to wear. In it, the neck is not blown and is not lost in too voluminous folds. Also, if desired or necessary, such snood length in two turns allows you to use it as a hood.

In the latter case, we note that the wider the snood, the more convenient it is to use it as a hood. But if you need a snood that “sits” rather narrowly on the neck and gathers in beautiful folds, it’s tedious to choose a smaller length and width.

Another tip from experienced knitters - in two turns should correspond to the "wingspan". In this case, we mean the distance between your straight and outstretched arms.

Useful tips for calculating the length of a snood in two turns and the number of loops for different models of snoods, taking into account patterns and knitting density:

The consumption of yarn is made depending on the complexity and volume of the pattern, the thickness of the yarn and knitting needles and the density of knitting. For a snood in two turns, knitted with a garter or stocking stitch with an average knitting density, it takes 250 grams of yarn. On average, a skein of warm yarn is 150 grams or 120 meters, in total we need 2 skeins of such yarn per snood.

Snood in two turns with knitting needles - a simple but effective model with a description of the work and assembly process

Today, snood is one of the most popular models of scarves. This accessory is very stylish and quite warm. The collar can also be knitted with your own hands, elementary knowledge of knitting needles and diligence will be quite enough to please yourself and your loved ones with a handmade thing.

How to knit a snood scarf with knitting needles

Before starting work on a snood, you need to decide which particular scarf should be knitted.
There are several different models of this product. Despite the fact that the design of the snood seems rather simple and monotonous, there are significant conceptual and design differences among the shape and type of scarves.

How to knit a snood scarf - models

At first glance, it seems that the scarves are visually almost the same, but there are many differences in them. Starting from the length, the nature of knitting and design, ending with the way of wearing and decorative function. Consider the differences between snoods and analyze the specifics of such knitting and design.

Snood scarf models in length

This classification divides scarves of similar knitting into types depending on the size.

Short. These models are worn only in 1 turn around the neck. Such options are more accessories than real sources of heat.
Medium. Such scarves are already worn in 2 turns around the neck. By knitting, they are warmer and retain heat better than the first.
Long. Such products can even be worn instead of a headdress. They are good because they are very warm and functional.

Snood scarf models in width

Models of a scarf snood knitted with knitting needles are of the following type in latitude.

Wide. Such accessories are extremely functional, because even if the model is short, it can be used as a scarf, as well as instead of a headdress.
Narrow. These scarves are designed to be worn around the neck only. They can also be short or long.

Snood scarf models according to the manufacturing method

Snood scarves can be made with different knitting techniques.

To create such an accessory, an ordinary scarf weaving pattern can be used, only at the end of the loop they are not just closed, but the beginning and end are connected into a continuous ring.
Often, for this kind of products, circular knitting is used, thanks to which the scarf is seamless. This technique also allows the use of various schemes and designs.
When knitting such products, different types of yarn are used. The choice of threads will determine how well the product will retain heat and its appearance.
When knitting a collar, it is recommended to use thick threads so that you can get a scarf capable of retaining heat.
For not too cold weather, you can make a mohair collar. This type of yarn allows you to decorate the snood with an openwork pattern.
The jacquard pattern, which is created only by circular knitting, looks very interesting.

Knitting Snood scarves with knitting needles: patterns with a description

Today there is a wide variety of options for knitting collars. Some are simple, while others are considered more difficult options. The choice of a certain one of them depends on the skill of the one who got down to business, and the moment what kind of snood should turn out.

How to knit a snood scarf with knitting needles: scheme for beginners No. 1

Even knitters without experience can make such a scarf on their own. This option is made quite simply. First, a model and pattern for the future product are selected, and only then yarn with knitting needles is selected.

In this case, the ability to set ordinary loops is important for the normal start of the knitting process. It is also necessary to understand by what principle the ends of the product are connected after the knitting is completed.

To link a simple snood model, you must follow the following rules and follow the sequence.

You need to dial 129 loops on the knitting needles.
Knit 1st row as follows:

20 purl loops;
then 8 - facial and again 20 liters. P.;
the next step is 1 crossed l. P.;
then 31 loops should be knitted according to the pattern (front row: 1 l. p., then 1 out. p.) this combination is repeated the required number of times until the desired length of the scarf is reached;
to knit the wrong side, you need to knit all the loops in the same combination as the front one, and then again 20 out. p., 8 l. n. and again 20 out. P.

2nd row: a purl row is knitted according to the combination of the pattern according to the following principle:

knit 5 more rows like this, while it is important not to forget about alternating the front row with the wrong one;
8 row must be done completely facial: it consists of 20 of. n, then 4 liters are removed on the auxiliary knitting needle. p., and then knit another 20 out. p., 1 l. p. of the crossed type, and 31 p. is knitted according to the combination of the pattern;
after the drawing, knitting continues with the following method: 1 crossed l. p., 20 of. n., then another 4 l. n. and you need to remove 4 l on an auxiliary knitting needle. P.;
the next step is these 4 l. sts are removed from the auxiliary knitting needle and 20 more are knitted from. P.;

In the same way, another 15 rows are knitted. It is important to remember about their alternation.
Further, the rows are repeated as many times as necessary to achieve the desired length of the scarf.

Knitted scarf for beginners: scheme for beginners No. 2

A simple collar can be connected in a different way. For this we need:

yarn, preferably thick;
knitting needles, matched to the thickness of the threads.

The sequence of actions when knitting will be as follows:

dial the desired number of loops, which will determine the height of the scarf;
knit the entire 1st row l. P.;
all other rows must be knitted in the same way, until the required length is reached;
all loops must be closed;
at the end, connect the ends of the clamp.

Snood scarf made of thick yarn with knitting needles: scheme for beginners No. 3

A scarf made of thicker threads will have approximately the following parameters:

in width - 22 cm;
length - 144 cm.

In order to get such a collar, you need to take about 300 g of thread.
It is recommended to choose knitting needles with a diameter of 10 mm.
In terms of density, knitting will turn out something like this: there will be 15 rows and about 8 loops per 10 cm of knitted fabric.
Now cast on 19 stitches and follow the following knitting instructions:

The 1st row is knitted with an alternation of 1 l. n. from 1 of. p., this combination is repeated to the end, the last loop should be facial;
the rest of the scarf is knitted in the same way and knitting does not end until the length of the collar reaches the desired mark;
then all loops are closed and snood is going;
for this you need to sew the short sides of the scarf;

At the end, process the product, and put the scarf on something solid. Place a towel folded 4 times under it. Place a wet cloth on top of the product and do not remove until the scarf is saturated with moisture. Then remove the fabric and leave the product in a horizontal position until it is completely dry.

We knit a scarf snood with knitting needles with a scythe

To make a collar with this pattern, we need knitting needles No. 4.

Work sequence:

Cast on 63 stitches on needles.
Start knitting a pattern that will permeate the entire product.
Try to work so that the odd rows are of the facial type, and the even rows are of the purl type.
From rows 1 to 7, the knitting should be as follows: 1 chrome, 4 l. p., 15 l. n. Repeat this pattern as many times as necessary.
From 2 to 8 rows fit like this: 1 chrome., 4 l. p., 15 of. n. You need to repeat this combination until the end of the 8th row.
9 row: 1 chrome., 4 l. p., and then 10 loops are crossed to the left side, 5 of them must be left on the auxiliary knitting needle, and 5 l. p. are knitted with an auxiliary one), we finish all the 5th l. n. This sequence is repeated to the end.
From 10 to 18 rows are knitted, as well as a sequence from 2 to 8.
From 11 to 17 rows are knitted in the same way as they were knitted from 1 to 7.
For the 19th row, the scheme of the 9th is used.
Then continue according to the scheme starting from the 1st.
Finish knitting the product and assemble it.

After the snood scarf has been knitted with a braid, it is necessary to check the resulting seam for strength.

We knit a circular scarf snood collar with knitting needles: scheme

This knitting option is very simple. The basis is "English gum".
To make this scarf you need:

woolen yarn, medium is better;
knitting needles number 9;
needle;
scissors.

Process sequence:

dial the desired number of loops;
1st row start with 1 l. n, then yarn over, remove the loop, but do not knit, but repeat the combination.
2nd row: Yarn over, slip a loop, but do not knit, but knit a crochet with a removed loop together and finish this row;
3rd row: 1 yarn over and a loop from the previous row are knitted, 1 more yarn over is made, a loop is removed that is not knitted and so it is knitted to the end;
the rest of the part is knitted by alternating the 2nd and 3rd rows until a certain width is reached;
at the end, sew the ends of the product.

Knitting pattern for a voluminous scarf with knitting needles

This collar is pretty easy to make. If the scarf should turn out to be voluminous and airy, then the knitting needles can be taken thicker, if more dense - less.

You will need the following materials:

thick yarn - at least 400 g;
circular knitting needles - 10 mm.

Knitting pattern:

Dial as many loops as required - an average of 90 pieces. Mark the start of work with a special marker.
To make the edges softer, knit 4 rows with an elastic band.
The 1st row is knitted completely with facial loops.
The 2nd row is also knitted in this way.
From 3 to 6 rows are knitted according to the scheme: 2 l. n. and 3 of. n. This combination is repeated to the end.
Then knitting is repeated starting from the 1st row.
Once the process is completed, you need to carefully hide the ends of the threads.
Before wearing, the scarf must be steamed. This procedure will give the loops a smooth look.

Original schemes of scarves with knitting needles for beginners

You can make a collar using more interesting techniques. This approach is not always complicated, some ornaments are obtained by a completely simple combination of loops and a simple knitting technique. Let's consider some of them.

Knitted mohair snood scarf

Knitting a snood from such yarn is very simple. For this we need:

mohair threads;
knitting needles for the thickness of the threads.

Knitting pattern:

You need to dial an odd number of loops.
On the 1st row, all stitches are knitted.
From the 2nd row, the knitting changes to the wrong side.
The next 2 rows are again knitted with facial loops.
For the 5th row, a combination is used: 2 l. p. knit together, yarn over, and then another 1 l is knitted. n. This method should be worked until the end of the row.
Row 6 is knitted again in st.
Further, the pattern is repeated from the 1st row.
After finishing the pattern, you need to collect the product and steam it.

Openwork scarf snood knitting

To knit such a product, you will need 300 g of threads of medium thickness. It will be about 25 cm wide, the length of the folded snood will be approximately 60 cm. For such a product, it is better to use circular knitting needles 6 and 7 mm. To get a free web, you can take even thicker knitting needles.

Knitting pattern:

It is necessary to dial 180 loops. Place a mark at the end of the row and connect the loops in a circle.
1 row is knitted only in the front way. Change the needles to thicker ones.
Knit 1 more row on them. P.
Next, knitting begins according to a certain pattern. Knit 4 out. p, 1 l. p., 1 of. p, 1 l. p., 3 of. P.
Next row: 5 l. p., 1 of. p, 1 l. p., 1 of. p. and 2 l. P.
Further, the combination is as follows: 6 out. p, 1 l. p., 1 of. p., 1 l. n. and 1 of. P.
Fourth row: 7 l. p., 1 of. p., 1 l. P.
Fifth row: 1 l. p., 7 of. p., 1 l. p., 1 of. P.
Sixth row: 1 l. p., 1 of. p., 7 l. p., 1 of. P.
Seventh row: 1 l. p., 1 of. p., 1 l. p., 7 of. P.
Eighth row: 1 l. p., 1 of. p., 1 l. p., 1 of. p., 6 l. P.
Ninth row: 2 out. p., 1 l. p., 1 of. p., 1 l. p., 5 of. P.
Tenth row: 3 l. p., 1 of. p., 1 l. p., 1 of. p., 4 l. P.
This technique is repeated until the end.

The scheme of a beautiful scarf snood for a girl with knitting needles

Snood for a child is knitted no less easily than a regular collar. You just need to choose the right size. To do this, it is important to know the age of the child.

from 3 to 5 years - 22 cm wide, 66 cm long.
from 5 to 10 years - 22 cm wide, 70 cm long.
from 10 to 16 years - 22 cm wide, 75 cm long.

What you need:

The yarn is thick, the knitting needles are selected already under it. For a more airy product, thick tools are needed, to obtain a tight knit, thinner ones.

Snood scarf knitting pattern for a girl:

Cast on 22 stitches.
Row 1: Knit.
Further, the process continues also until the desired length is reached.
After finishing knitting, you need to connect the scarf.
Steam the snood before wearing.

Knitting patterns for a scarf snood

The most popular patterns for snood today are "Rice" and "English gum".

Scarf snood knitting pattern: "Rice"

This pattern is completely simple. The basis of the technique is the alternation of facial and purl loops in the 1st row, then purl with facial in the 2nd and facial with purl in the 3rd row. In this way, the snood is knitted to the end until the desired length is reached. The result is a canvas that resembles the structure of rice.

Scarf snood knitting with a description of the scheme: "English gum"

This drawing looks very beautiful and is created quite simply.

The 1st row is knitted by alternating front loops with a crochet. Next, the loop is removed and not knitted. In this way, a whole series is knitted.
In the 2nd row, you must first make a crochet, and then remove the loop and do not knit it. Then knit these two elements together.
3rd row starts again with yarn over. It is connected to the loop and knitted, and then you need to remove the loop, but you do not need to knit it.
Further, these combinations must be repeated from the very beginning.

How to knit a snood scarf on 2 knitting needles

Almost all snoods are knitted on 2 knitting needles. Consider the option, which is considered one of the simplest.

Knitting pattern:

Cast on 160 loops.
Knit an elastic band 10 cm in size. At the same time, the front and back loops alternate.
Continue working in garter stitch: 1 row - facial loops and 1 row - purl loops. This combination must be repeated up to about 20 cm.
Next, you need to return to the elastic band and knit another 10 cm with such a viscous.
At the end cast off all stitches of the last row.

A warm and beautiful handmade accessory will be the best gift. The complexity of knitting lies only in following a clear sequence, but if you set a goal, then such a thing will work for you and your loved ones for many years.