A gift suitable for any occasion and mood - a bouquet of balloons. He will certainly make everyone smile. Such a present is far from a banal way to decorate the birthday of your child or best friend.

In this article we will tell you about several ways of this interesting action.

You will need:

Preparation

So let's get started. First, cut round holes inside two pieces of cardboard. One is approximately 15 cm in diameter and the other is 10 cm.

Don't worry if it doesn't look pretty, you'll be using the pieces of cardboard as a holder or template, not for the final product.

Inflate five balloons for flower petals. It is better to choose them from the same color range. When inflating the balloons, push each one into the center of the cardboard template 15 cm.

If it's too big and won't fit in the hole, bleed some air out and fit it to the correct size. Tie off the end of the balloon after checking.

The center is made of two small balls. But they should already be of different colors in order to stand out from the petals when the flower is collected. Then you need to do the same procedure - put the balls into a cardboard hole with a diameter of 10 cm.

Then choose the right size accordingly and tie the balloon when you are done.

Making the flower itself

Tie two balls of flower petals together.

They should be facing opposite directions when you tie their ends together.

Use a piece of thin wire. If you are afraid to pierce, then you can take a regular thread.

Tie the remaining three balls together as well. They should be evenly spaced, and try to create a Y-shape when tying. Use the previously selected material for fastening the cylinders. Hold the balls together with one hand and wrap the wire or thread around the ends with the other.

Tie two sets of ready-made flower petals together according to the old pattern.

The balls should protrude outward, with all ends joined together in the center.

After that, they may look ridiculous, don't worry, everything will fall into place after adding the middle.

Tie the center pieces together. These smaller balloons should be facing in opposite directions when you tie the ends together. Then comes the final stage.

Take the two center balls and wrap them around the flower petals so that one center ball appears on each side surrounded by petals. This will create a 3-D effect.

We tie the ribbon in order to conveniently hold a beautiful product. Then it’s a matter of fantasy and desire, you can attach a stem made in advance.

Instead of ribbon, consider purchasing wooden sticks that you can paint green to use as a stem.

If you're planning to hang these flowers for party decor, it's best to wait closer to the start to avoid sagging.

How to make chamomile

To do this, we need balls of different colors, from long models.

We do everything the same as for an ordinary flower, only we bend the balls for the petals in the middle.

Flower from ShDM

To do this, we need two balls for modeling different colors, a hand pump, a little skill and a good mood. To begin with, we make the future flower, without a stem yet.

We inflate our balloon completely, leaving 2-3 centimeters at the tip, and tie it into a knot. Then fold in half and twist 3 times in the center. Soon we evenly make 3 parts, twisting at two points. It will look like baby sausages. We put those three parts into a kind of accordion. We do this with one hand, holding the beginning and end with the thumb and forefinger. With the other hand, twist the ball 2 times. As a result, we got the top of our flower, which consists of six petals.

Of course, you have seen more than once clowns, circus performers who fold balloons into the most unimaginable shapes. So, this is called "twisting". Now we will describe how to make a bouquet of special balloons using this technique.

For the bouquet that we want to make, we will need a few things, namely:

• 6 5 inch balls;
• 5 10 inch balls (or more)
• 5 green balls and 6 multi-colored modeling balls;
• hand pump.

Have you stocked up on everything you need? Great!

Key points

First, let's take a look at the main points. These are iron rules that must be followed not only in our particular case, but in each case of working with balloons in this technique:

1. You can not inflate the balloon to the end;
2. Twist (yes, we will twist the balloon) the balloon in one direction only;
3. Twisting start from the "neck".

A short twisting course has been completed, let's proceed to the master class itself.

How to make a balloon flower?

We start creating a bouquet with the flower itself. To do this, take a red balloon and inflate it almost completely so that about 3 cm at the end remain deflated. Tie a ball is not difficult: wrap the tip around the middle finger and index finger, forming a loop, and pass the tip of the ball into it.

Take two balls, tie a double knot at the ends so that a ring is formed. Fold the ring in half and twist in the fold area twice.

We take a folded ball, divide it into three, twist it in two places

We fold the ball into the shape of an accordion. We take the accordion that we got, grab it with one hand at the twisting point, and with the other hand we scroll the ball in the center. Voila! We get a flower.

How to make a stem of balloons?

This is the easiest step. To make a regular stem, we need one green ball. We inflate it, leaving a couple of cm at the end not inflated. We make a knot.

We count with the eye about 10 cm from the knot, bend it, look at what level the knot turned out to be and twist the ball in the place so that the knot hides.

How to arrange a bouquet?

We'll show you two ways to turn individual balloon flowers into a beautiful, cohesive bouquet.

1 way: a bouquet in a "ribbon"

We inflate the modeling balloon so that at the end there is 7 cm of uninflated space. “By eye” we measure 4-5 cm from the knot and make a twist.
The tail with a knot is wound to the place of twisting.

So that the tip does not interfere under the arms, we cut it off almost under the knot. As a result, the ball turns into an air "ribbon".

To complete the composition, we decorate the ribbon with a bow. We take a balloon for modeling, inflate it almost completely.

We make a large loop at a distance of about 30 cm from the knot.

Next we make a loop of the same size. The ends of the balloons must be the same length. We get a "bow".

We connect the "ribbon" and "bow", beautifully bend the ends of the bow.

After all this, you can insert previously made “air flowers” ​​into the workpiece.

Method 2: Bouquet with stand

For this bouquet, we need ordinary balloon flowers, without twisted green leaves.

We take the flowers, level them in height, tie them with a thread.

We determine the height of the structure, determine where the stand will be, tie the stems together in that place.

Before diving headlong into the creative process, pay attention to the twisting technique. All twists are performed in one direction. Use your free hand to hold the first and last bubbles, this will help keep the shape and prevent the ball from spinning.

One - chamomile, two - chamomile!

To make chamomile from balls, you will need two green and white balls, a hand pump. The white color of the ball does not limit your choice, to create a multi-colored bouquet, choose the color you like.

Using a pump, inflate the balloon so that the tip is at least 3 cm long. Tie the beginning and end of the balloon with two knots. Bend the structure in half and twist in the middle twice. Divide the ball into three equal parts and twist in two places. Fold the harmonica and take it with your index finger and thumb at the twist points. Twist the three petals with your right hand. This completes the creation of the flower and it's time to move on to the stem.

Inflate the green balloon to the end, but not too tightly so that twisting manipulations do not cause damage to it. Step back 10 cm from the knotted knot, bend and twist the ball so that the knot is located at the place of twisting. Insert the stem into the middle of the flower.

Million Scarlet roses

Another fairly simple flower that can be obtained from a modeling ball is a rose. To make it, you need two red balls and two green ones. Fill the balloons with a pump and secure the end firmly. To get a bud, fold the ball in half, twist its ends and mark the middle. Fold the resulting design in half again and twist. As a result, you will get four petals.

Fold one of the green balls in half and tie off the edges. Divide the ball by eye into three equal parts to get three leaves. Fold each piece in half and twist. Screw the ends of the red bud ball obtained earlier to the middle of the corolla. The second green ball will become the base of the stem. Bend future leaves in the form of a loop and twist around the stem.

The second red ball will become part of the bud. Inflate the balloon and tie in a loose knot, tie the ends together. To connect the two parts of the bud into the second element, put your hand in, squeeze the four petals and thread them like a loop. Attach the stem to the end of the first bud by twisting the ends. To get a bouquet, connect several flowers with a bow ball.

To create balloon bouquets, you will need special modeling balls, which are abbreviated as BDM. They are long, round in shape, made of 100% latex. The townsfolk usually call them "sausages". The art of twisting balls to obtain various shapes, including flowers, is called twisting. We can call this art modeling, which allows you to create various figures and flowers using balloons, which will make beautiful flower arrangements, often used as a gift or decoration.

Bouquets of balloons

CDMs are different in shape and size, they also differ in color and, of course, in quality, which determines their cost. The first thing that will definitely interest you if you decide to do balloon bouquets, these are their sizes, for this you need to learn how to read the symbols on the packages. On each package you can read the numerical designation, where the first number determines the diameter, and the rest - the length. For example, if you see the designation 260 on the package, then you can determine that the diameter of the inflated "sausage" will be two inches, and the length will be 60 inches. We know that one inch is approximately 2.5 cm, so the 260 inflated balloon has a diameter of 5 cm and a length of one and a half meters.

The most common sizes for creating from balls are 160 and 260, but manufacturers can meet 350 and 646, however, balls with the same markings from different manufacturers may vary slightly in length and volume, as well as their shades. There is another secret, for example, if you first stretch the ball by the tips, then after inflating it will turn out to be longer.

The color palette you choose depends on which manufacturer you choose. There are two main types of staining: the "pastel" group offers rich, pure colors that have a matte finish; the metallic group offers balls with brilliant shades. There are also other types of shades - "mother of pearl", "satin", "crystal", "decorator", which will help you create unique floral airy compositions.

Different color groups differ in latex density, so "pastel" is usually plastic and soft, and "metallic" is more elastic and rigid. If you want to get a beautiful bouquet of identical flowers, then it is better to use the same group of balloons, then the composition will look neat.

Bouquets of balloons

On the market, you can find cheap and expensive balloons that vary in quality. Different manufacturers offer a different palette of shades. Producers Kualateks and Sempertex stand out, they offer "sausages" of different sizes.

Manufacturers also produce packs designed for professional or amateur use. For professionals, they offer packages of 100 pieces, sometimes 400, of the same or different colors. Assorted packs usually contain 6-7 colors. Amateur packs of 10-20 pieces, in addition, they usually add a small deposit, and the pack may also contain instructions for twisting simple shapes. An amateur set will allow you to master the basics of twisting. However, you should be prepared for the fact that the cost of one CDM in an amateur pack is much higher than in professional packaging. At the same time, they are inferior in quality. An amateur can afford to buy a pack of 100 pieces of high-quality 210 or 160 CDM, preferring the assorted pastel group. And if you still doubt your ability to twist balls into a beautiful flower, you may like the idea of ​​\u200b\u200bhow to do it.

If you decide to do balloon bouquets, photo which you are probably impressed on the Internet, then you will be interested in the following question: how long will they retain their original appearance. In other words, how long will the balloons remain inflated, which will allow the flowers to be beautiful and voluminous. Professionals make models that can keep their shape for up to five days, beginners are unlikely to achieve such results, and the first flower can be preserved for only a few hours. At the same time, direct sunlight or exposure to wind gusts on the CDM should not be allowed.

How to make a balloon bouquet

DIY balloon bouquet can be performed together with the child, it will be an excellent leisure for the family, in the process of developing the game, children will learn to create and model, the process itself has a positive effect on micromotor skills, and this is reflected in the development of brain activity. But for adults, modeling will be a very interesting activity, especially if you want to decorate a room for a holiday or present a bright, spectacular gift. often sold at fairs and holidays, so if you learn how to twist beautiful bouquets and flowers, this can turn into an article of family income.

Bouquet of balloons for birthday will be a bright decoration of the holiday, as well as an original gift. And although such a bouquet will not wither, but after a few days it will lose its beauty.

Now you know a lot about the different types of CDM: about their sizes and color palette, about the quality that various manufacturers offer, as well as about the kits that you can buy in the store to try to create for the first time bouquet of flowers from balloons, which will become original and unique and not only for a child, but also for an adult woman, in whose soul there always lives a child who loves balloons.

You will be surprised that not all people are delighted with balloons, and what causes violent emotions in most of us - joy, happiness, fun, for some can cause panic and horror. The reason for this is a very rare phobia, which is observed only in a few people in the world, called "globophobia". For some, this fear may seem ridiculous and ridiculous, but those who suffer from it are trying to get rid of the phobia with the help of psychologists. The patient is terrified at the sight of an inflated balloon, and also at the thought that it might burst. In addition, they are afraid that they can fly away on a balloon into the sky, and therefore they will never agree to either inflate it or hold the bundle in their hands. Before decorating the room for a celebration, ask if one of your friends has such a phobia.

Balloon bouquets: master class

We will not get a beautiful flower arrangement if we do not learn how to twist flowers, so we go directly to the lesson on how to make balloon bouquets, master class Let's take a closer look at creating flowers. The set of materials is very modest - two balls, one is always green for the stem, and the second is spring, bright, floral. And for fast and convenient inflation, we will use a manual pump.

For a flower, we take a red balloon and inflate it with a hand pump, leaving the tip of three centimeters not inflated. We tie the other end to a tight knot so that air does not escape. Then you need to connect the ball into a ring and tie the end and the beginning of the ball into two strong knots. The resulting ring should be bent in half, twisting twice in the middle, now we have a ring that consists of two sausages of the same size.

The resulting workpiece must be divided again: this time into three equal parts, and in order to separate them, it is necessary to twist in two places. Each twist consists of two turns. After that, we managed to separate three parts. Next, you need to fold the workpiece into an "accordion". This “accordion” must be fixed with the fingers of the left hand, and twisting with the right hand should be done to form petals. Now we have a flower ready, but still without a core and without a stalk, in order to understand the phased implementation, a photo lesson will help you, in addition, balloon bouquets video the master class will help you complete.

After the petals are ready, you need to inflate the green ball, because we are starting to make the stem. We will inflate the green balloon to the very end, without leaving a free tip, but at the same time it should not be inflated tightly, otherwise the ball will simply burst when twisting. The tip of the ball must be tied in a tight knot.

About 10 centimeters should be retreated from the edge with the knot, then fold the tip in half and twist so that the knot is in the place of twisting. This resulting ball must be inserted into the middle of the petals. It remains only to twist the stem to get two leaves and we can assume that our flower is ready. Several of these flowers can be folded into a bouquet by tying the stems with a ribbon.

How to make a balloon bouquet

Of course, the simplest option how to make a balloon bouquet, it's easy to tie a few ready-made flowers with floristic tape, but you can weave the stems into a basket, and then you get a beautiful flower arrangement. Its main advantage is that it is stable - you can put it on the floor or on the table, so the flower basket will be a wonderful holiday decoration.

Looking at the master classes in the pictures, you see that the models are lying on the table, however, when making figures, the balls should always be held in hands, on weight, pressing to the body. If you perform twisting on the table, dust particles can get on the rubber surface, which can cause microdamages. As a result, due to such microcracks, the ball itself may burst.

When you twist the basket, make sure that the bubbles on each tier are the same length, so try on carefully before twisting. Performing tier after tier, you will get a beautiful basket. Baskets are also made in a different way: first they create a base with guide lines, and then they wrap these “lines” with sausages.

Many different options can be found, which are obtained bouquets of balloons, photo you will be delighted, and you will definitely want to twist such a charming flower out of a rubber "sausage" yourself. These skills will help you decorate any holidays, whether it's a child's birthday or an office party on March 8th. And if you learn how to make other figures, working not only with "sausages", but also with ordinary round balls, then for the New Year you will have an unsurpassed one.

Instructions for making flowers from balloons.

Modeling Balls (SMBs) are often used for aero design. With their help, they decorate weddings, birthdays, make voluminous bouquets and various sculptures. Also from such scarves you can make numbers for your birthday. Below we will tell you how to make flowers from such balls.

How to make flowers from balloons with your own hands: step by step instructions, photos

Below is a step-by-step instruction for making flowers from birthday balloons.

How to make a simple flower from long balloons CDM: diagram, photo

One of the easiest options is to make a chamomile or tulip from balloons. They can be made for Valentine's Day or Teacher's Day. Below are the diagrams.

How to make a chamomile from long balloons CDM: diagram, photo

Instruction:

• It is necessary to inflate the sausage from the ball, you should not inflate it very much, because then it will be difficult to twist and work with it. Make sure that the ball is a little soft, but elastic enough.
• After the sausage of the desired color is ready, roll it into a ring. After that, fold in half, you get a double sausage.
• Next, you need to divide it into three parts and twist in these places. As a result, you will get 6 cute sausages. After that, fold them together at the folds. Twist, you will get a flower of 6 petals.
• Now start making the stem. To do this, take a green ball. In the same way, inflate it not tightly and make a loop in the upper part. Pass the loop up through the flower, you can begin to form the leaves.
• Make a ring in the middle part of the stem, make another one a little higher. As a result, you will get a pretty flower with six petals with a green center on a stem with leaves.

How to make a rose from long balloons CDM: diagram, photo

One of my favorite flowers is the rose. Despite the fact that its manufacture seems rather complicated, it is not. It is much easier to make a rose than an ordinary chamomile or even a tulip. This is a great gift option for February 14, 23 or March 8.

Instruction:

• To do this, you need to make 3 main flower knots. 1 part is a bud, that is, a loop that will be in the center of your flower. You need to make a double loop from the sausage, then roll the knot from the other ball.
• Make another knot. Thus, you need to wind the ball around the ring. You will get some interesting turntable. Now insert a prepared loop made from another ball into this twisted ring.
• Now you can start making the stem. To do this, inflate a green sausage and twist the petals. Insert the ball into the bottom of the bud, that is, you need to connect the flower and the stem.

How to make a complex flower of long balloons CDM: diagram, photo

Below is a video detailing the manufacturing process.

VIDEO: Complex flower

How to make a flower from round balloons: diagram, photo

If you don't have modeling balloons, you can use ordinary balloons, which are sold in any store.

Instruction:

• Inflate 5 balloons of one color and one of another.
• Now, by twisting their tips together, connect the five balls into one. Attach a ball of a different color in the center. As a result, you will get a ball of 5 petals with a center of a different color.
• Such balloons are used to decorate arches when organizing weddings, they are also often used to decorate the porches of restaurants where they celebrate the New Year or birthdays.

How to make a bouquet of flowers, daisies from long CDM balloons: diagram, photo, description

Bouquets of balloons look very nice and unusual. To do this, you need several manufactured flowers.

Instruction:

• To make a bouquet, you can choose either a simple chamomile, or a rose or a tulip. By the way, the tulip is the easiest to make.
• To do this, you need to inflate the balloon, long enough. After that, roll it into a ringlet and conditionally divide it into three parts. Now at the folds you need to connect these three parts. At the very end, you should have something that looks like a bunch of sausages.
• Now attach a green stem to this flower. It is necessary that each stem has one leaf. In the central flowers, do not make any leaves at all, because they will interfere. Because of this, the bouquet will fall apart.
• You can make a bouquet of 5 or more balloons. When all the flowers are individually ready, just tie them with a bow from the same modeling ball.

How to make a flower arrangement from balloons: aero design ideas, diagram, photo, description

There are a huge number of flower arrangements. They can be used on September 1 and open Knowledge Day. Below are the most interesting options.

The best do-it-yourself balloon flowers: photo

Almost any flower from a balloon can be made independently. To make flowers from balloons, you need to purchase suitable balloons and follow the scheme. Below are the color schemes.
DIY balloon flowers

DIY balloon flowers

Try to decorate your holiday yourself. To do this, use aerodesign.

VIDEO: Bouquets of balloons