How to sew a simple dress? Schemes of the simplest dresses without patterns: straight, evening, long. How to sew an evening dress with your own hands

0 606400

Photo gallery: Floor-length dresses with long sleeves: photos and patterns

Dresses are an integral part of a woman's wardrobe. They come in various models and styles, so you can always choose a model that suits your figure. In 2016, floor-length dresses with long, one-piece sleeves are at the peak of popularity. You can wear them both to festive events and to work and school. One of their advantages is that they look good not only on slender girls, but also on overweight women. Such an outfit will hide flaws and focus attention on advantages.

Photos of fashionable dresses for the fall-winter season 2016-2017

Floor-length dresses look incredibly feminine and elegant; they can decorate any girl. Such clothes will always be in fashion despite the popularity of short skirts, jeans and trouser suits. You only have to look at the current models for the fall-winter 2016 and 2017 seasons to want to wear something similar.

During this period, outfits with bright floral prints, plain, striped, and with an elegant belt at the waist are in fashion. It is acceptable for the neckline, shoulders or back to be open. The fabric can be either light and translucent or quite dense. You can choose models with lace, rhinestones or embroidery. A straight silhouette is popular.

Photos of stylish dresses:

Patterns for floor-length dresses with sleeves

It often happens that a woman is unable to find a suitable straight dress in a store, or its price is much higher than what she can afford. This is why some girls prefer to sew their own outfits. This not only helps you save money, but also allows you to create unique clothes. Moreover, you can make an outfit of different types: without darts, loose fit, straight silhouette, tunic type, without sleeves and with them, etc. As for the size, it can be any, at least 40, at least 50 or 60. The most important thing is that a homemade outfit with sleeves will not cost much. And it can be done for summer, autumn, winter and spring. The main thing is to know how to sew correctly.

To make your task easier, you can use ready-made patterns. This will significantly speed up the process and also give you an idea of ​​what style of outfit to make.

Simple basic pattern:

Step by step how to sew a floor-length dress using a pattern

Sewing a woman's dress yourself is not the easiest task for those who have little experience in this matter. Therefore, for beginners, it is worth considering the process step by step to make it clearer how the outfit is made.

We sew a tight-fitting dress as follows. First you need to cut out the material, this pattern will do:

Sewing is done as follows. It is necessary to gather and distribute the edges on the central areas of the back, connecting and central areas of the front. Cut out 2 cups from woolen fleece, as well as the central and connecting elements of the front.

Now you should grind the central parts of the front. Attach a strip of fabric for lining to the gathered part. Start stitching from the marked seam line to attach the cups. Next, you need to sew the connecting particles of the front to the central ones.

Next, you will need to sharpen the side front elements to the connecting ones. The next step is to grind the shoulder seams on the yokes. Cut seam allowances, overcast and iron. Edging the neck edges with bias tape.

Baste the cups to the shoulder yokes. Place the parts of the cups made of crepe and the lining fabric on top of each other and stitch the upper edges. Baste the details of the cups at the bottom and sides. Next, grind them to the front and leave it like that. On the front zone of the lining fabric, make raised and middle seams. Sweep the bottom. The lining and before aligning, stitch the top edge, stitch to the seam allowances of the stitching. Then baste the cuts on the sides of the front area and the lining.

Now you need to sew a zipper to the central sections on the back. Attach the back shoulder yokes to the top edge, sew raised seams on the lining, and overcast the bottom. Sew the lining to the zipper, sweep away the side sections of the crepe and lining material. Sew the seams on the sides. Sew the hem allowance on the bottom by hand.

Sleeve seams should be made according to the French type. The allowances should be joined and stitched at a distance of about 2 mm. Hem the edges of the cuts, then sew on the buttons and add air loops from the thread. All that remains is to sew in the sleeves.

If everything was done correctly, you can end up with a dress like this:

Options for the resulting floor-length dresses from our readers

Making clothes with your own hands is not an easy task, but it can be done. In order for the product to turn out beautiful and neat, you will need to try. Our readers shared outfits that they sewed themselves. Each option looks great, and this once again confirms that you can make a loose dress yourself that will look better than a store-bought one.

Choosing a dress for the New Year is not an easy task. As a rule, there is no time to run around shopping in search of “the one.” It’s scary to buy on the Internet, because the size may not fit, and it’s unclear what color and fabric will arrive in your package, and most importantly, when. Many girls are ready to sew a dress on their own, but not everyone has enough experience and it is not always clear where to start. Let's figure it out together.

What fabrics are best for beginners?

The choice of fabrics is now not limited by anything, except, perhaps, price. Look at the styles we offer and decide exactly what your dress will be. After this, feel free to go to a store, for example, fabric house "Tissura", and choose something to your liking.

To ensure that the result does not disappoint you in the end, it is important to choose the right fabric - beautiful and not difficult to work with.

1. Do not buy silk or satin fabrics under any circumstances. that do not stretch or crumble along the edges (especially light ones). They are usually very difficult to work with. For a dress to look decent, every line must be placed perfectly, all seams must be in place.

2. Better opt for knitwear. Don't be alarmed, knitwear can be very thin and light. If the fabric stretches slightly, it will be much easier for you to cut, and the dress will fit perfectly. There will be no need for any extra darts or complex tucks. In addition, it is easy to process the edge of such fabric. Sometimes it’s enough to carefully cut off the excess and you don’t have to hem it at all.

3. Don't choose a complex print. The ideal option would be, or vice versa, a dusty shade, or a light, barely noticeable ornament.

4. Before you go to the store, be sure to decide on the style , calculate the amount of fabric needed and take into account all additional materials: threads, machine needles, elastic, buttons, zipper, bias tape for finishing edges, chalk.

How to sew a sleeveless knitted dress

Even a beginner with zero experience can sew such a dress. You will need 2.5-3.5 meters of knitwear (depending on the length of the dress and your height) and your favorite T-shirt for the pattern. The sewing process itself will take you a couple of hours, but as a result you will get not only an outfit for a festive dinner, but also a dress for every day.

The video shows the pattern of cutting and sewing in detail.

If your level of mastery of the material and sewing machine reaches the “master” level, then you can safely transform the proposed lesson and complicate the dress model. For example, add sleeves or transparent inserts along the bottom of the skirt and in the neckline. Choose a more complex fabric or use multiple layers.

How to sew a floor-length dress with a peplum

This lesson offers very detailed and clear instructions. with a peplum and a beautiful cutout on the back (although it’s not really a dress, more like a suit), it turns out that you can sew it in just four hours. Every girl's dream.

The cut of this dress is not as simple as in the previous tutorial. But if you take dense, high-quality fabric that does not fray or stretch like knitwear, everything should work out for you.

The first video will help you take measurements correctly and accurately create a pattern for your dress. The author of the video also explains how to lay out the pattern on the fabric. If you want to slightly modify the silhouette of the dress, with these instructions it will be very easy to do so.

The second part of the video shows the sewing process from start to finish. Starting with how to correctly connect the elements, ending with processing the edge and neckline with bias tape.

Outfits that are easy to make based on this dress. Add decorative metallic elements, change the shape of the skirt or the model of the top. The choice of color is also up to you: the best option this year is, of course, red.

How to sew a stylish dress with one seam

If you don’t have time at all, then try sewing a dress like this, with just one seam. You will need three meters of flowing fabric (silk, chiffon, crepe, satin and others). If the fabric doesn't seem too festive to you, try lace, a shiny texture, or even a fabric with sequins. The sewing process itself will not take more than an hour, unlike shopping.

Outfits that are easy to make based on this dress. For those who know how to cut on their own, I offer a few more simple models that can be sewn in just an evening.

Probably, many have encountered the problem that cutting and sewing magazines are full of a variety of patterns for everyday and business outfits, but there are very few evening models. As a rule, they are boring and do not always follow fashion trends. On this occasion, a selection of evening dress patterns from the catwalk from world couturiers has been created for you. Sexy mermaid dress, A-line with a deep neckline, classic straight and disco short - these outfits will always be relevant.

Mermaid

We can say that the mermaid is the most interesting style for designers. The fitted silhouette and flared skirt remain unchanged, but what the bodice and tail will look like depends on your imagination.

We present to your attention a simple model with straps and a light drapery on the bodice, which will give a small volume to the chest and focus attention on the neckline area; a wide belt will further contribute to this.

Front modeling

1. Add the length of the skirt you need on the basic pattern and flare it out. The splendor of the “tail” depends on the width of the flare.
2. Draw the neckline and armhole. Close the dart.
3. The bodice is cut off, so set aside 15-16 cm from the neckline and model a belt 8-9 cm high (see pattern).
4. The belt is ready, we will cut it.

Bodice modeling

Cut the front of the bodice along the lines and widen it by two cm (see picture). The distance between parts can be increased to 3 cm if you want the number of assemblies to be large.

Back modeling

Model the back in the same way as the front of the dress.

This outfit should be very tight-fitting to the silhouette, which means that minimal increases in freedom of fit are made.

Decoration of the belt and bow

1. To drape the belt, you need a rectangle with a width equal to the width of the front part of the belt (detail 2). Its height is 2 times greater.
2. Sew the rectangle along the sides, carefully pull it evenly to the width of the front waistband. Baste them together and stitch them together. Then baste the drapery along the top and bottom edges. Then sew as a single-layer piece.
3. For the bow, also cut out two rectangles. Their finished width should be equal to the width of the front part of the belt, and their length should be 75 cm.
4. Sew all the details of the dress. Sew the finished bow elements into the sides of the mermaid and tie with a bow.

Half couture

At one of the shows, Elie Saab presented a red chiffon dress with the illusion of nudity.

The cut of the model is quite complex, so we will consider the sewing stages in detail.

Required for work:

• lining fabric to match the skin tone;
• Chantilly lace;
• chiffon:
• lightning.

Constructing a pattern

Please note that there are 2 options for creating an evening dress pattern with your own hands:

• draw on graph paper and then cut out;
• use the RedCafe program.

The program has a convenient function that divides lines by color, so you can see the location of all the lines.

Note that modeling a skirt is quite simple and you can immediately do it on fabric.

Cutting out the lining

The modeling stage is over, let's start working with the fabric.

• Print out the pattern and fold it into a single piece, matching the corners.
• Then transfer the pattern to the lining fabric and trace the lines with soap or a piece of chalk. You can use a disappearing marker.

Sew darts and side seams on a machine without backtack and with a wide stitch width. This basting is necessary to check the desired fit of the bodice on the mannequin.

Since the model is difficult to sew, check the fit frequently. This way you will be more successful in achieving the desired results.

Working with lace

Cut out the lace fabric according to the pattern of the lining fabric. Fasten it on the sides and sew the darts, after cutting off the excess lace along all the cuts.

Sew the darts at the waist and press them towards the center. Make sure that they are not visible on the lace from the front side.

Stitching raised lines

At this stage, the sequence of stitching the embossed binding is important. The pattern should be beautiful, without overlapping lines. To understand which line will come first, make a sample. For contour lines, use knit bias tape. It is shine-free and easy to work with.

Processing slices

Use knitted tape to trim the edges of the armhole and neckline. Finish the neckline, which turns into a slit on the back, with tape stitched into a spread.

Cut out your skirts

The half-sun skirt consists of a thick lining and transparent chiffon.

Make the bottom radius the desired width.

Working with large cuts has its own characteristics:

• Make sure there are no defects, stains, or stitches on the fabric;
• Try to buy the material in stock, so you won’t overpay.
• Keep in mind that chiffon with natural threads can shrink, so carry out a damp-heat treatment on a sample of the material.

Get rid of the edge. After making a cut, tear it off along the bottom and top edges of the fabric.

To assemble the skirt along the waist line, lay 2 lines 1 cm apart and carefully pull to the desired width. It is better to take reinforced threads, they are resistant to strong tension.

Sew a lined chiffon skirt. Process the cuts using an overlocker. Attach the resulting hem to the bodice of the dress on the mannequin. Correct any discrepancies if necessary.

Sew the zipper into the middle seam of the skirt.

At the final stage, connect all the parts. Sew the belt to the skirt with frills along the bottom edge, and then to the top of the dress.

Short dress with one sleeve

The one-shoulder evening option not only allows you to move away from the usual styles, it has a number of advantages, such as practicality. The dress pattern will be relevant for any occasion. The solemnity of the model will depend on the chosen material, but you can adjust the length to your liking.

Modeling

1. On the base pattern, cut the chest and shoulder darts.
2. Align the shoulder sections.
3. Close the darts and decorate the neckline.
4. Model the back.

The increase in looseness of fit depends on the fabric you choose. If it is elastic, then the increase is minimal - 1.5 cm. When modeling, be sure to completely retake the back and front of the outfit onto tracing paper.

Hello, my dear readers of the blog “site”! I am glad to welcome you! And today we will sew something beautiful floor length dress, evening, or maybe not (if you take a different fabric). In any case, if you understand the general principle that I will outline below, you can sew any number of a wide variety of dresses for yourself using this one model.

First, I want to clarify that the downloadable pattern below is designed for the following sizes:

• St (half waist circumference) = 37 cm;
• Sb (half hip circumference) = 50 cm;
• Arm length = 61 cm.

The finished pattern corresponds to sizes 44-46, the dress is made of fabric that is very stretchy.

For this dress you will need:

1. 3 -3.5 meters of stretch fabric;
2. Bias tape for knitwear - 1m;
3. Needle for knitwear and stretch for sewing machine;
4. Mesh (30 cm) - optional, to decorate the bottom of the dress.

Download the pattern for the top of the dress and sleeves.

And we will build the skirt ourselves. The skirt is part of a circle, such skirts are called conical or conical. And the construction is carried out using a coefficient that is chosen depending on the shape of the skirt.

I wanted to sew a half-sun skirt; in my opinion, this is a very good choice for an evening dress. Perhaps a circle skirt would look and play even better, but such a dress requires twice as much fabric. So I opt for this skirt model.

Half-sun skirt. Construction.

In order to build a skirt, you need to fold the fabric face to face so that you get a square with sides of 1.5 meters (this is taking into account that the width of the fabric you bought is 1.5 meters, sometimes 1.4 - will also work).

Please pay attention to the side where the edge of the fabric passes - this is the grain of the fabric, and we will build a drawing by laying the fabric on the floor, just like the fabric, marking with chalk or soap.

In the drawing it will look like this:

In the upper left corner under the fold of the fabric we place point A.

From point A we draw a straight line parallel to the edge to the very bottom of the fabric.

From point A we put down = St × coefficient = 37 × 0.64 = 23.7 cm. We put point T.

From point T, set down the desired length of the skirt from the waist. For me it is 110 cm.

We place a compass at point A and draw arcs from points T and H. In the drawing this is done with a compass, and on the fabric with a measuring tape: hold the tape at point A at the starting mark with one hand, and with the other hand hold the tape at point T with a piece of chalk, and draw the radius along the fabric like a compass.

We also draw an arc from point H.

On the arc from point T we plot the width of the skirt along the waist line - for us it is 37 cm. Through the resulting point and point A we draw a straight line along the entire width of the fabric. The drawing should look like this.

We cut out our skirt, take allowances of 1.5 cm.

From the remaining fabric, cut out the front part of the top with a fold, the back part of the top with a fold and the sleeves. I would like to note that 3 meters of fabric were taken end to end, so try to lay it compactly; to be on the safe side, you can take 3.5 meters of fabric initially.

Now we definitely need to hang up our skirt sag, having previously stitched the waist line with a straight stitch. Why is this being done, you ask? This skirt is cut on the bias, i.e. the lobe line runs along the side, and in the center of the skirt there is an oblique line. And in order for the product not to sag when worn, you need to hang the skirt in this way (as in the photo below) for 3 days. This time is enough for the oblique threads to stretch out as much as possible under the weight of the skirt itself and not then deform the finished product when worn.

Do not neglect this point; you will be surprised how much stretched fabric you will have to cut later.

After three days, you need to put the skirt back on the floor, and straighten the bottom of the skirt (cut off the excess) so that there is 110 cm from the waist everywhere (this is mine, you take your own length).

Sew the skirt along the side seams.

Now let's start processing the neck of the dress. We measure the front neckline with a centimeter tape, cut out this length (you need to take a little more - 2-3 cm) from a knitted trim.

We go around the cut of the neck with bias tape, folding it in half and putting the cut into it, basting it if you are doing this for the first time. And carefully and carefully sew it on the machine. Here you need to adapt and “get the hang of it” so that the edging turns out perfect, I got it right the first time, although I had to loosen it up a little and correct it. I hope everything works out for you too))

The photo shows the treatment of the neck of the dress, only made of red fabric.

It turns out such a neat edging. Not very well, however, black on black is clearly visible in the photo, but I couldn’t photograph it any other way(.

We sew the sleeve into an open (as in the photo) or closed (then first we sew the top of the dress on the sides, and sew the sleeve with a tube) I'll get it.

We process the cut of the sleeve near the wrist: we turn the seam allowance to the wrong side and sew it on the machine.

Sew the top of the dress to the skirt, matching the side seams.

We process all internal cuts with an overlock or zig-zag stitch. Although, to be honest, my fabric did not fray at all, but folded up like a tube, so I did not process the seams on the inside.

Then I wanted to decorate it, and I sewed a strip of mesh on the bottom, 8 cm wide and length = the circumference of the skirt. And along the edge of the mesh I also sewed a piping 1 cm wide and length = the circumference of the mesh.

Here. This is such a cute dress. And the most wonderful thing is that it is sewn in 2 hours!!!

Watch another video with an idea on how to quickly and easily sew a floor-length dress:

I wish you good luck and creative success! And sew with me! See you soon on the pages of the blog “Sheisomnoy.rf”!

On the front half of the dress, place 24-27 cm upward from the waist line. Draw a horizontal line along the armhole line of the dress.
Place 4 cm down along the front. Draw a line for the neckline of the dress using the pattern.
Set aside 3 cm from the middle of the front of the dress along the waistline of the dress. From the right side of the chest dart of the dress, draw a straight line to point 3.
From the left side of the chest dart of the dress, draw a relief line along the pattern.
Move the waist dart of the dress to the center front. From the waist dart of the dress, draw a line for the second relief along the pattern.
Cut off the front of the dress at the waistline.
Model the back of the dress as shown in Figure 2.
Additionally, construct a draping part of the dress. To do this, you need to measure the length along the waistline of the front of the dress. Plot this value along the line.
The length of the part on the side is equal to the length of the dress on the side from the waist to the bottom.
Remove the side part from the side of the dress. Extend the part 20 cm downwards. Cut out 2 identical pieces for drapery, sew them along the bottom, turn them inside out and press them through. Then apply the resulting detail to the front of the dress skirt and sweep along the sides. Next, sew the skirt as a single layer.
Additionally, re-edit the top of the dress with a width of 3 cm in finished form. Additionally, cut out: a belt loop for the draping part, 10 cm wide (5 cm in finished form) and 15 cm long (one end of the belt loop is placed on the waist section of the dress under the drapery part, the second end is folded over the draping part and placed on top).
From the lining fabric, cut out all the details of the dress minus the facings.
The raised seams are reinforced with bones.

OPTION 3
This little black dress, embroidered with rhinestones, will make you the star of any party! You can sew such a dress yourself if you follow our instructions.

Pattern modeling.

Since the dress model is very tight-fitting, there is no need to give an increase in the looseness of the fit.
On the front of the dress, move the vertical chest dart to the middle of the front, model the neckline, move the dart along the waist of the dress to the side of the dress.
Cut the pattern for the front of the dress along the horizontal dotted lines and move it apart by 2-3cm for gathering.
Make the length of the dress according to your own measurements. (Including the frill of the dress).
Model the frill of the dress additionally as shown on the dress pattern.
Model the part embroidered with rhinestones as shown in dress pattern 3.
This part must be cut out additionally in 2 copies.
Reinforce one piece with thermal fabric, embroider it with rhinestones or stitch on ready-made motifs.
The collar of the dress should be modeled additionally.
Model the back of the dress as shown in dress pattern 4.

IMPORTANT! This dress gathers at the side seams and is very form fitting. Therefore, fabrics should be selected with elastic additives in their composition.

Additionally, cut out the lining (without additives for gathering at the seams).

How to sew a dress.

From the main fabric, cut out:
In front of the dress – 2 children.
The back of the dress is 2 pieces.
Dress frill – 2 children.
Dress collar – 1 piece. with fold + 2 parts.
Central detail embroidered with rhinestones – 2 pieces.

Front of the dress – 1 child. with fold
The back of the dress is 2 children.

How to sew a dress.

On the sides of the front and back of the dress, sew stitches with a stitch length of 4mm. Pull to the desired length according to the pattern.
Along the middle seams of the front of the dress and the back of the dress, sew lines with a stitch length of 4 mm. Pull and gather.
Baste the side seams of the dress and stitch.
Baste the middle seam of the front of the dress and stitch.

Sew the lining of the dress along the side seams and along the middle seam of the back of the dress until the zipper slit.
Fold the dress from the main and lining fabrics face to face, baste and stitch along the top seam.
Turn the dress inside out and sweep the top clean.
Reinforce the central part with thermal fabric. Tuck in the sides.
Place the piece on the dress, baste, straightening the gathers of the dress.
On the second piece, tuck in the seam allowances along the sides.
Align the parts with each other, place the second part on the wrong side of the dress on the lining, and baste.
Topstitch 2 pieces with one line to the edge.
Sew rhinestones and beads onto the top part by hand.
Sew the frill of the dress on the sides. Pull along the top of the frill.
Place the main fabric on the bottom of the dress, baste and stitch.
Fold the lining of the dress along the bottom and baste it by hand, covering the allowances.
Fold the bottom of the dress frill and stitch it.
Place the dress collar part reinforced with thermal fabric onto the central part and stitch it.
Place the second collar piece on top of the first and stitch along the top and sides.
Turn onto face and sweep clean.
Fold the bottom edge of the collar, baste, and stitch.
Manually embroider the collar with rhinestones or ready-made motifs.
Sew loops and hooks along the middle seam of the back collar.

OPTION 4
This dress is a real treasure! Such a dress can be made from iridescent gold satin with elastic threads, from taffeta or any other dress material.

Pattern modeling.

Since the dress is tight-fitting, you can leave no or very minimal allowances for loose fitting.
Transfer darts to the front half of the dress and to the back of the dress, as shown in the dress pattern. Model relief seams along the dart lines. Shorten the front and back of the dress to the desired length of the skirt (without flounce).
Model the flounce of the dress separately. If it is not possible to cut out the flounce of a dress without seams, you can make 2 seams that will coincide with the side of the dress.

Additionally, cut out the belt of the dress.

How to cut a dress.

From the main fabric you need to cut:
Dress detail 1 – 1 child. with fold
Dress detail 2 - 2 children.
Dress detail 3 – 2 children.
Dress detail 4 – 2 children.
Flounce dress – 1 child. (or 2 pieces with a fold)
Dress belt – 2 children.
The piping details on the top of the dress completely duplicate the dress pattern up to the waist.
Hemming of dress details 1 – 1 child. with fold
Turning detail dresses 2 – 2 children.
Turning detail dresses 3 – 2 children.
Turning detail dresses 4-2 children.
The facing parts of the dress must be reinforced with thermal fabric.

From the lining fabric you need to cut out:
Parts 1-4 minus facings.

Additionally, you need to buy bones for the side seams of the dress and the reliefs of the back of the dress.

How to sew a dress.

Baste and stitch the raised seams of the dress and the side seams of the dress.
Take side seam allowances together and stitch them 0.7 cm from the seam. Place a stitch from the top of the bodice of the dress to the waist line of the dress.
Cut the bone to measure for threading into the resulting drawstring. The length of the bone should be 1cm shorter than the drawstring. Insert the bone.
Re-stitch the drawstring along the top of the dress and along the waistline of the dress so that the bone does not fall out.
Sew a hidden zipper along the back of the dress.
Baste and stitch a flounce along the bottom of the dress.
Reinforce the facing details of the top of the dress with thermal fabric.
Baste the facings of the dress with the details of the lining of the dress.
Baste the side and raised seams on the lining of the dress.
Place the lining with the dress face to face. Baste and stitch along the top and zipper bands.
Turn the dress inside out, sweep the top clean and iron.
Fold the bottom of the lining and baste it by hand with blind stitches, covering the seam allowance for the dress flounce.
Fold the flounce of the dress at the bottom and hem it by hand with hidden stitches.
Baste the waistband of the dress and sew along all sides, leaving an open area for turning.
Turn the waistband of the dress inside out and iron it.
Sew the open area manually using hidden stitches.
Place the belt on the dress along the seam and sew it tightly to the dress with hidden stitches.
Tie a bow at the front of the dress.

OPTION 5
This dress is for the young and brave!

Pattern modeling.

If you plan to sew a dress from elastic fabric, then when creating the pattern for the base of the dress, make a minimal increase in the looseness of the fit (1.5 cm).

IMPORTANT! When modeling a dress, the front of the dress and the back of the dress must be completely re-shot on tracing paper.

The cutting of the dress must be done on the fabric laid out in one layer (beyond the ruffle of the dress). You need to cut out 2 identical flounce parts, one for the back of the dress, the second part for the front flounce of the dress.

OPTION 6
This cute silk dress captivates, first of all, with its simplicity of design and execution.

Pattern modeling.

How to design and sew a dress.

On the front half of the dress, move the chest dart to the side.
Shorten the dart by 2 cm. Model the neckline by setting aside 24 cm from the bottom of the front neckline.
Flare the front of the dress along the side by 4 cm.
The back of the dress is modeled in the same way.
Draw a horizontal line from the bottom of the armhole of the dress. Cut off the top.
Move the waist dart to the center of the back of the dress.
Flare the back of the dress on the side by 4-5 cm.
Additionally, cut out 2 strips of fabric for the bow: one 65 cm long and 20 cm wide (finished 10 cm), the second 70 cm long and 15 cm wide (finished 7.5 cm).

OPTION 7
This dress is a real dream! The dress is made of elastic satin, and its accent is the unusual pleats along the skirt.

Pattern modeling.

Do not increase the looseness of the fit, as the model is very tight-fitting
Re-draw the pattern for the front of the dress onto tracing paper completely.
Draw modeling lines on the bodice of the dress.
Trim off the excess along the top of the dress.
Flare the skirt as shown in the dress pattern.
The more you flare the skirt, the fuller it will be towards the bottom.
Mark squares on the wrong side of the dress pattern as shown on the pattern.
The length of the dress depends on the side of the square that you specify. Remember that when making folds, we reduce their length by 2 times.
On the pattern, the length of the dress skirt from the fold line will be 40 cm (3 squares of 10 cm (with folds) and 1/2 square along the bottom of the dress to level the bottom of the dress.
Model and mark the back of the dress in the same way.
The folds are not ironed, but are only basted along the blue dotted lines to the cover of the dress, which is additionally cut out using the same pattern.
Then the folds are secured with horizontal stitches, each 5cm long.
The lining of the dress is cut 4cm shorter than the dress.

How to cut a dress.

From elastic satin you need to cut out:
Front of dress – 1 piece with fold
The back of the dress is 2 pieces.

From lining fabric:
Front of the dress – 1 child. folded
The back of the dress is 2 pieces.

Additionally, cut out a strip of fabric 8cm wide and 30cm long to make a rose.

IMPORTANT! The hidden zipper should not be long - only about 30cm and should end before the folds.

How to sew a dress.

On the front and back of the dress, use running stitches to transfer the fold markings to the front side.
Do the same on the lining parts.
On the front of the bodice of the dress, cover up the darts. Stitch.
Baste and sew darts on the back of the dress.
Baste the dress along the side seams and stitch.
Sew the lining details of the dress in the same way.
Lay the dress and lining face to face, baste and stitch along the top of the dress bodice. Turn out, iron.
Sew a hidden zipper along the back of the dress.
Turn the dress inside out. Place the folds according to the markings, sewing them to the lining of the dress with short horizontal seams (5cm each).
Trim the excess lining so that it is 3-4cm shorter than the dress.
Fold the bottom of the dress and sew it to the lining by hand using blind stitches.

How to sew a rose

Fold the strip of fabric in half lengthwise and then twist it in a spiral, starting from the center of the flower, securing it with stitches as the petals form.
Hide the edge of the strip under the bottom of the flower.
Sew a flower to the dress.
Decorate the bodice of the dress with ready-made motifs.

OPTION 8
Do you want to be the star of the party? Then, without hesitation, sew this dress for yourself!

Pattern modeling.

Allow the minimum increase in freedom of fit – 1.5 cm.

Transfer the pattern of the front half of the dress and the back half of the dress onto tracing paper and model the bodice and skirt as shown in pattern drawings 1 and 2.

Additionally, you will need to cut out 2 strips of fabric for the bow: one 20cm wide (finished 10cm) and 80cm long, the second 30cm wide and long (finished 15cm) and 60cm long. The bow can be reduced as desired.

OPTION 9
This charming dress is simply made for noisy parties! And you should definitely sew this dress! After all, modeling it is very simple, the main thing is to put in a little effort and you will be a star!

Pattern modeling.

In this case, allowances for loose fit are not given.
The mesh width for the skirt must be calculated as follows: Hip volume multiplied by three. The calculation given on the pattern is based on a hip volume of 96 cm.
The length of the mesh for the skirt is 80 cm (finished - 40 cm).
Mark the folds as shown in pattern 1.
Model the bodice of the front of the dress and the back of the dress as shown in patterns 2 and 3.
Additionally, you need to cut out the bottom of the dress from lining fabric.

How to cut a dress.

From the main fabric, cut out:
The middle detail of the front bodice of the dress is 2 pieces. with bend
The side of the front of the dress is 4 pieces.
The side of the back of the dress is 4 pieces.
The middle detail of the back of the dress is 4 pieces.
Dress skirt – 1 panel
From the lining fabric, cut out:
Front part of the dress skirt – 1 piece. with fold
The back of the dress skirt is 2 pieces.

Additionally, cut out a belt, 8-10 cm wide (4-5 cm in finished form), and 100 cm long. Flare the ends of the belt by 2-3 cm.

How to sew a dress.

Reinforce the details of the bodice of the front of the dress and the back of the dress with thermal fabric.
Baste and stitch the details of the front bodice and back of the dress along the raised seams. Stitch.
Only allowances on the side seams, taking them together at a distance of 0.7 cm from the connecting seam. Insert a bone into the resulting drawstring, 1 cm long shorter than the side seam without allowances.
Place pleats on the skirt of the dress made of the main fabric, as shown in the pattern. Ideally, you should end up with a ball of folds.
The mesh is calculated based on the volume of the hips, so at the waist, each fold must be placed a little further than the intended line.
The same can be done along the bottom of the dress, then the shape of the skirt of the dress will look more like a ball.
To ensure that the folds hold well, make short fastenings on each fold that will hide under the layers of fabric.
If the above diagram does not suit your figure, you can lay out the folds in a chaotic manner directly on the mannequin.
Baste the bottom of the dress and the top of the dress. Sew the zipper along the back.
Try it on and make adjustments if necessary.
Sew in a hidden zipper.
Baste and stitch the bodice parts from the main fabric (dress lining) without reinforcement with thermal fabric.
Baste and stitch the details of the skirt of the dress from the lining fabric.
Connect the top and bottom of the dress lining by basting and stitching along the waist seam.
Place the main garment and the lining of the dress face to face.
Baste and stitch along the top of the dress bodice.
Baste and stitch the dress and lining along the bottom.
Turn the dress onto the face through the open area and sweep cleanly along the seams.
Fold the zipper allowances under and hand sew with a blind stitch.
Additionally, sew a belt for the dress. To do this, you need to cut out 2 parts 4-5 cm wide and 100 cm long.
The ends of the dress belt have a flare of 2-3 cm.
Place the details of the dress belt on top of each other face to face.
Baste and stitch along all sides, leaving an open area of ​​about 5cm for turning.
Turn the belt inside out, sweep it clean, and press it.
Sew the open section of the belt manually with a hidden seam.

The following models are developed on the basis calculated in the "Cutter" program.
You can download a demo version of this program.

OPTION 10
The dress is tight-fitting at the waist and tapered at the bottom, made of non-stretch dress fabric. In front is a bolero with a jacket collar and lapels. Shoulders slightly slumped. Asymmetrical closure with a hidden zipper moved to the side seam. The flap of the front is stitched to the fold of the bolero lapel. The back has reliefs from the armhole and a slit at the bottom. Under the dress there is a corset trimmed with lace.

Model processing technology

Sew the zipper into the left front relief up to the fold line. Stitch the edges of the relief cuts and the lapel with facings, turn them right side out and sweep the edges. Unscrew the loose part along the fold, baste it to the shelf and baste the open sections together. Sew the side dart on the shelf and stitch the relief of the shelf. Stitch the edge of the edge and the shoulder of the bolero lapel with lining. Stitch the armhole of the bolero from the shoulder to the notch. Turn the bolero pieces right side out. Stitch the armhole of the bolero from the notch downwards in relief. Sew the right front to the bolero. Stitch the middle back seam, shoulder darts and reliefs. Stitch the back armhole with a facing. Sew shoulder seams of top and lining. Sew the side seams by placing the edges of the front and bolero between the edges of the back and back facing. Finish the collar and sew it into the neckline. Process the bottom of the product.

OPTION 11
Dress of a fitted silhouette with one sleeve, cut in the middle, and a strap. Bodice with an asymmetrical hem in front, the back lowered from the waist. There is a zipper on the back. The skirt is flared.

Since the dress has an asymmetrical shape, it is necessary to have 2 sets of bases and build the right and left parts of the front and back separately. On the right and left shelves, move the shoulder dart to the side cut. Glue the right and left shelves along the front cut and apply model cut lines along the top and bottom of the front part of the bodice. On the left back, mark the width of the shoulder equal to the width of the front shoulder from point P along the line, because The back in this model is without a dart and draw the armhole line from point P to P3. Draw model cut lines on the left and right back. Measure the length of the strap on the front and back. Cut the sleeve in the middle and widen its front and back parts.

OPTION 12
An evening dress made of soft jersey, tailored exactly to your figure, with a large neckline, cascading flounce, a high side slit, and long sleeves gathered at the wrist. The evening dress is designed on the basis of a dress of an adjacent silhouette with a single-seam sleeve without a dart.

To model this dress, you need two sets of patterns and increase the sleeve length by 10 cm..

On the shelves, move the shoulder dart to the side cut. Connect two shelves along the middle cut and draw model lines. Cut off the right side of the shelf. Mark cut lines on the right side of the shelf.
Cut the allowance for the dart and cut the right side of the front along the marked lines, not bringing the cuts to the side cut by 0.5 cm. Move the cuts apart at the same distance from each other, while closing the side dart. Trace the resulting pattern and cut it out.

Close the shoulder dart on the back; to do this, draw the shoulder line from point A2 to point P and draw the armhole from point P to point P3. Deepen the back neckline. Draw the shuttlecock in the form of a spiral. The length of the internal spiral is equal to the sum of the lengths of the neck cut and the shelf cut. The width of the shuttlecock at its widest point is 15 cm.

Gather the sleeve at the bottom along the stitching seam.

OPTION 13
Evening dress made of brown chiffon with pink satin lining. The top has a feminine drape. Strongly flattering cut. Bodice with a cut in the middle of the distance from the chest line to the waist line. Skirt full sun. The armhole and neck sections are finished with elastic braid. The side seam has a hidden zipper. All sections of the top and lining are sewn down at the same time, only the chiffon skirt at a distance of 10 cm from the bottom is sewn down without a lining.

Based on a dress with an adjacent silhouette, cut off the bodice along the intended relief line. On the shelf, close the dart from the shoulder. On the front and back, mark the location of the neckline and armhole cuts according to the model. Close the waist darts on the lower parts of the front and back. These are the details of the satin lining. The chiffon parts should be 1.5 times wider along the shoulder and bottom sections, as well as along the side sections of the lower parts of the shelf.

Cut out the full sun flared skirts onto the fabric:
The radius of the notch at the waist is St/3. Along the bias thread, reduce the notch at the waist by 1.5 cm. From the waist, using auxiliary segments equal to the length of the skirt with an allowance for processing, draw a line for the bottom of the skirt.

Fabric consumption for a full sun flared skirt:
L = 2R + √ (2R)2 - W2

Where:
L - blade length
R - radius of the circle
R = St/3 + skirt length with processing allowance
W - web width

OPTION 14
The evening dress is made of thin knitted fabric. There is a deep neckline in front, reliefs from the armhole. The back bodice consists of three triangular-shaped parts. At the end of the upper part of the bodice there is a 2 cm air loop. The side parts of the back bodice end with ribbons, which are threaded into the loop of the upper part and tied. The back skirt consists of two parts.

The model is developed on the basis of a dress with an adjacent silhouette, in which all allowances are reduced to zero for a tight fit to the figure.

OPTION 15
The dress is fitted along the bust line and widened at the bottom, made of crepatlas. There are folds in the front, with ruffles sewn into the folds. Finishing stitches are placed on the folds down to the bottom. There are soft pleats on the sleeves. Bugle beads are sewn along the bottom of the sleeves and between the folds, shimmering in the dim light.

The model is developed on the basis of a straight silhouette dress with one-seam sleeves. In the measurement “Arm length to the first joint of the thumb” (Dr1c), you must enter the length of the sleeve for this model, namely to the elbow. In the Ozap measurement, enter the measurement of the shoulder circumference at the top of the OPV. Pb=5, Popv=20, Pozap=10 cm.
On the shelf, mark the lines for stitching in the ruffles, cut the base along these lines and move the parts apart by 2 cm. The dotted line marks the facings of the neckline of the front and back.

Model processing technology

Finish the ruffles with a zigzag stitch with a double hem, preferably using a snail foot. Finish the end sections with a hem stitch. Overcast the front and back sections except for the shoulder sections, neckline and armhole sections. Fold the bottom of the shelf and stitch at a distance of 2 cm from the fold, leaving 5 cm from the side edges unstitched.

Mark the fold lines for the folds on the shelf. Baste the ruffles to the fold folds to a depth of 1 cm. Sew the ruffles with a 0.5 cm seam from the fold fold and continue stitching to the bottom.

Baste the ruffles to the shelves and stitch them onto the shelves, placing a stitch in the ruffle stitching line. Overcast the neck facing and sew it around the front neckline. Stitch the facing seam 1 mm from the fold. Iron the facing to the wrong side, securing it along the shoulder edge. Stitch and iron the back seam. Overcast the facing and stitch around the back neckline, leaving the shoulder seam allowances unstitched. Stitch the facing seam to the facing 1 mm from the fold.

Place the shoulder sections of the shelves together with the facing between the shoulder sections of the back and the facing of the back neckline, stitch the shoulders and overcast from the side of the shelves. Iron the back neck facing inside out. Stitch side seams and iron. Fold the bottom of the back and stitch at a distance of 2 cm from the fold. Overcast the sleeve sections, except for the edging section. Place the folds in the direction shown in the drawing. Place folds in the middle of the sleeves and secure them with a zigzag stitch, 4-5 punctures in one place. Sew bugles onto the sleeves. Stitch the side edges of the sleeves and hem the sleeves. Sew the sleeves into the armholes and overcast the stitching seams on the front and back sides.

OPTION 16

Dress made of soft crepe satin. The bodice is loose with one-piece sleeves. There is a double collar to keep the dress on the shoulders; there is an openwork braid at the back. The skirt is slightly tapered at the bottom. Wide belt with a bow tied twice.

The model is developed on the basis of a dress with a straight silhouette. The body position is 0, Pk=0. The chest dart is closed from the shoulder and open from the waistline. The bases of the front and back bodice are connected so that their middle cut is on the same line. Distance |A4,H| equal to the length of the sleeve plus the width of the shoulder slope "Shp". The model is cut without middle and shoulder seams.

OPTION 17
Slim fit dress made of chiffon with lining. The bodice lining is duplicated. Side closure with hidden zipper. The length of the dress on the short side is mid-calf, with the length reaching to the ankle. The figure-flattering cut makes it look slimmer.

The model is developed on the basis of a dress with an adjacent silhouette. Two sets of patterns were printed. On both halves of the shelf, the darts are closed from the shoulder, and open from the side cuts. The shelves and backs are connected vertically, then all the design lines necessary for the model are drawn, taking into account that the shoulder width of the bodice in the cut should be twice as wide as in the finished form. The skirt consists of two wedges, the shape and cutting method of which are shown in the drawing.

OPTION 18
Strongly flattering cut. Seam at the waist and under the bust. The upper part of the bodice is draped. The lower part of the bodice fits tightly to the figure. The shoulder is dropped, there is a deep neckline in front. Flared skirt". Length 6 cm below the knee.

The model is developed on the basis of a dress with an adjacent silhouette. Mark a cutting line on the shelf. Move the shoulder dart to the lower edge of the upper part of the front. Lengthen the shoulder by 5 cm and create a new armhole shape. Outline the shape and depth of the cutout. Draw the lower part of the shelf horizontally, shortening it by the amount of the dart. Mark a cut line on the back. Draw the shoulder line from point A2 to point P in a straight line and continue the shoulder by 5 cm and draw a new armhole shape. Mark the cut of the neck and the middle cut of the back. Reduce the lower part of the backrest horizontally by the amount of the dart depth.

The flared skirt is constructed according to the calculations given below:
FROM = St * 1.4 - radius of curvature of the waist line.
TB = Dts/2 - distance from waist to hips.
TN = skirt length
TT1 = St + Fri
BB1 = Sat + Pb

Where:
Lts - back length to waist.
St - half waist circumference.
Sat - semi-circumference of the hips.
Fri - waist allowance.
Pb - allowance for hips.

OPTION 19
Dress made of fine knitted fabric with a satin effect. The top of the dress is straight cut. The skirt is two-layer, tightly fitting to the figure. At the top of the back there is an elastic band sewn with a zigzag stitch. The seam of the bodice and skirt is sewn with an elastic band using a zigzag stitch.

The model is developed on the basis of a dress with a straight silhouette. It can be done without side seams on the bodice by connecting the sections.

OPTION 20
Dress made of knitted fabric with a fitted silhouette, sleeveless, and high shoulders. Asymmetrical neckline. There is a strap on one shoulder, a thick gather on the other.

The model is developed on the basis of a dress with a fitted silhouette without any allowance for a loose fit. Connect the drawing of the right and left shelves along the half-skid line and cut the drawing from one highest point of the chest to the other and cut out the middle part from dart to dart. Close the right dart from the shoulder by turning the cut out part of the drawing around the highest point of the right chest. Connect the highest point of the neck with point A7 on the left side of the drawing with a convex line. Design the neck according to the model. Narrow the shoulders to the desired strap width.

OPTION 21
Dress of a fitted silhouette made of silver crepe satin with a lining, along the bottom of which a black frill is sewn. The flyaway yoke is assembled under the jumper.

The model is developed on the basis of a dress with an adjacent silhouette. The shoulder dart has been moved to the middle section of the front.

By sewing a long dress using this design, but without a frill at the bottom, you will get a wonderful evening dress.

Model processing technology

Glue the straps and lower parts of the finishing strips with non-woven material. Sew the jumper along the side edges and turn it right side out. Stitch the middle edge of the yoke to the right side. Sew the dart on the yoke to the front side, after inserting a jumper into the seam from the wrong side. Fold and stitch the bottom of the flap yoke.

Assemble the top of the trim strips. Stitch the strips along the upper side edge. Turn the planks right side out and secure with a stitch along the bottom and side edges. Sew the strips between the shelf yoke and the flyaway yoke at a distance of 4 cm from each other. Secure the lower cut of the jumper to the seam of the yoke dart from the front side. Overcast the shelf and its lining.

Sew the yoke to the front, placing it between the front and the lining. Overcast the sections of the back and its lining. Sew the middle back seam and press. Sew the darts on the back. Stitch the top edge of the back with lining. Place the elastic between the back and the lining and sew it with a zigzag stitch.

Stitch the back straps and turn them right side out. Stitch the front straps along the outer edge, inserting the back straps into the neckline. Sew the front straps along the inside edge to the yoke seams and turn right side out. Sew the front straps to the front side of the yokes.

Sew the side sections of the front and back together with the lining to the waist, and then sew the sections of the dress and lining separately. Fold the front straps on the wrong side and stitch them near the stitching seam. Finish the frill and stitch it to the bottom of the lining. Hem the bottom of the product.

If the model seems simple to you, then you are mistaken)) Look what you can create from this pattern:

OPTION 22
Dress made of thin knitted fabric, tightly fitting the figure. Parts of the bodice are intertwined, the harnesses on the back are twisted. Elastic band (elastic band) is sewn with a zigzag stitch along the side and back sections on the wrong side.

The model is developed on the basis of a dress of an adjacent silhouette with a preliminary increase in the values ​​of the vertical measurements of the figure, namely: chest height - Vg, length of the front to the waist - Dt.p, length of the back to the waist - Dt.s, oblique shoulder height - Vp.k, length sides - db, all 1.3 times. Allowances for freedom of fit Pg, Pt, Pb are equal to zero. Connect the upper and lower parts of the bodice by turning the upper part as indicated by the arrow.

Bodice processing technology

The straight upper sections and the lower ones from notch to notch of both parts of the bodice are processed with a hem seam with a closed cut. Sew the right side of the bodice along the bottom edge to the notches. Place the left side of the bodice into the hole formed on the right side of the bodice after stitching and stitch until the notches. Sew the bodice to the shelf.

OPTION 23
Dress made of crepe-satin or chiffon, lined, tightly fitting the figure. Concealed zip fastening in the back. The top of the dress is finished with bias tape made from the main fabric. The model is developed on the basis of a dress with an adjacent silhouette; the undercut on the chest from the shoulder section has been moved to the side section.

OPTION 24.
A very beautiful tunic model, easy to sew. Suitable for a cocktail dress, for pregnant women and luxurious women.

OPTION 25.
A basic dress pattern for ladies with appetizing shapes + 2 cocktail dress patterns and a lot of ideas, including evening dresses!
Watch and

OPTION 27. Corset dress!
Look .

OPTION 28. In this magnificent dress you will be the queen of any evening!
Look .

OPTION 29. Luxurious satin dress!
Look .

OPTION 31. Evening satin dresses!
Look .

OPTION 32. Strapless dresses!
Look .

OPTION 33. The sexiest and easiest dress to sew!
See and.

OPTION 36. Dress with draping at the neck!
Look .

Fashionable review of evening dresses from leading fashion houses! Season 2011-2012!

Many women choose a dress as their outfit for the New Year. In our opinion, no suit or incredibly stylish trousers combined with a blouse will emphasize your femininity and sexuality as much as a dress! So what dress can you wear for New Year?

Fashionable dress for New Year 2012 - fabric
Having decided on the model, take no less seriously the choice of material from which your holiday masterpiece is woven. It can be silk, satin, etc., but the undisputed leader of fashion shows are dresses made of velvet: luxurious, flowing, a little reminiscent of the surface of water.

Fashionable dress for New Year 2012 - color
The mega fashionable palette today is headed by the alluring and mesmerizing color of silver and gold, as well as all shades of gray, beige, sand, bright red and deep purple and, of course, stylish black and chic white have not sunk into oblivion.