How to sew men's jeans in a belt. How to sew jeans in a belt

If last summer you bought fashionable shorts, and now they are large in size, you should not be upset. You can remake them and fit them to the figure in almost one evening. At the same time, it is not necessary to be an experienced cutter. It is enough to know the basics and the desire to quickly put on your favorite clothes.

It is possible to reduce the size of shorts without recutting if they are not sewn in much, by a maximum of 2 sizes. This will be a little more difficult to do, unlike altering a skirt or dress.

Important! Uncertainty in your skill is a reason to contact a specialist in the studio.

Materials and tools needed for rework

The skill of a craftsman is determined by his tools. Not a single seamstress will save on technical equipment and various devices. If the house does not have an electric or industrial machine, you can get by with improvised means. List of required tools:

sewing thread and needle;
needles and pins for basting;
threads of a contrasting color for basting;
threads to match the fabric;
large and small scissors;
tape measure;
chalk or soap for marking.

A thimble will help to avoid punctures if the fabric is thick enough and you plan to sew by hand. If there is a machine in the house, it will be much easier to remake the product.

Options for performing work to reduce the size of shorts: suturing in the waist, hips, across the leg

Before you sit down to alter shorts, carefully measure the excess fabric that needs to be removed. Try on your favorite wardrobe detail, pin the place for cutting with pins. Move a little, sit down. You need to make sure that after the alteration the thing will remain comfortable and beautiful.

Sew shorts only on the sides will not work. For proportionality, it is necessary to reduce the product on the sides and inside. There are several sewing options:

Waist

We undermine the belt at the back of the product and pull out part of the elastic band. Having fixed its part, you need to make sure that the shorts fit perfectly on the waist. We cut the elastic band and sew it on. After that, close the hole in the fabric. The greater the difference in size, the crease at the back of the belt will be more visible.

If there is no elastic on the product, you can easily add it. To do this, stretch the edge of the elastic band at the back of the belt and make cuts. Using a pin, thread it and make two lines from different sides.

On the hips

Put the shorts inside out and pin the excess material with needles. Having outlined the seam line, we open the side seam, pockets and belt, as well as the seam between the buttocks and cut off the excess. At the end, we make several decorative stitches on the sides by hand or on a typewriter.

Interesting! In a similar way, you can easily change the style of the shorts by making them narrower or by changing the flare to a flat model.

By leg length

Measure for yourself the desired leg length and make a mark with chalk. Before cutting the fabric, add a couple of centimeters for hemming and draw additional marks. Better if someone else does it. Bending down, the thing will rise, and perfect accuracy will not be achieved.

When sewing, be sure to check the length of the legs by folding the products in half.

Completing of the work

Shorts are sewn according to certain standards. Therefore, often even a thing that is suitable in size may not be suitable due to the structural features of the body. It is for this that it is worth learning how to sew things in the right places.

How to sew shorts on the side seams

Put the item inside out and mark the place of the stitching with an overlap of a few centimeters. This is necessary to shrink things after washing. Sweep the thing and repeat the fitting. If you are satisfied with the result, cut off the excess part and sew with a needle by hand or sew with a machine.

Important! For those sewing in clothes for the first time, it is best to cut off excess fabric after sewing in order to be able to rip the product.

Sewing by hand in this place will not work. Even experienced cutters do not take risks so as not to spoil the thing. Basting must be done by an assistant. Using a ruler, it is necessary to measure the same distance on the sides from the seam between the buttocks. Open the belt and draw a cut line. After sweeping, put the thing back on to make sure that the preliminary outlines are correct. Sew the seam on the machine and overcast with an overlock. For beauty, make finishing lines on the outer seam.

How to shrink shorts without ripping (using darts)

A dart is a tapering piece of fabric sewn inside a garment, specially assembled to reduce the size of the garment or to fit the figure. If the shorts are not much big, one tuck in the middle back is enough. Otherwise, you will need two on the sides of the back seam.

Draw the necessary tucks on the outside of the product and place it at an angle to you. Baste with a single thread from the narrow end to the wide end and tighten well. Iron the darts. Try on the shorts and carefully see if the tucks are pulled on them. Sew inside according to the basting and cut off the excess fabric.

How to downsize denim shorts without altering (using hot water).

When washed in hot water, jeans are well reduced in size. But the other material is also prone to shrinkage during heat treatment. To do this, it is necessary to lower the product for 15 minutes in boiling water (about 90 0). Prepare a container of cold water first. After immersion in hot water, quickly dip the shorts for a few minutes to cool down in cool water. Dry the item and iron it. The clothes will take the desired shape and become one and a half sizes smaller.

You can also use machine wash at maximum temperature. Please note that a long stay in boiling water will shrink not only the fabric, but also the threads with which it is sewn.

Attention! This method is one time. It will be necessary to do these manipulations after several appearances during the next wash.

To give your favorite clothes the right shape and size is the dream of every fashionista. With the help of simple tips, you can quickly and without much effort restore the attractiveness of comfortable shorts.

If you bought jeans and found at home that they are a little too big for you, do not be upset. Jeans that are large in size can be reduced a little, unlike small items that can no longer be done. In order to slightly adjust the size, you can choose the method that suits you best.

Method 1: Wash in hot water

The first and easiest way to downsize your jeans is to wash them in hot water. Put the jeans in the washing machine, then set the temperature to 95 °. When the wash cycle is over, stop it. This must be done before cold rinse water flows into the washing machine. Then start the machine again, but this time without the use of powder and any detergents.

After washing, dry the jeans either in the drum of the machine at maximum temperature, or on a hot radiator, or in the sauna steam room

You can also wash your jeans by hand. Pouring boiling water into a deep basin, lower them for 10-15 minutes. Do not add washing powder, otherwise the color of the material will fade. While the pants are in boiling water, pour cold water into another basin. Quickly remove the jeans from the boiling water and place them in cold water for a few minutes. Then wring out and dry the item. Denim tends to wrinkle a lot after drying. In order to iron it without much effort, turn on the “steam” function on the iron. After ironing, try on jeans and evaluate the result.

However, this method has a significant drawback. The fact is that after some time after wearing, jeans can again stretch and return to their original state. Therefore, periodically (for example, once every few weeks) you will have to re-wash your jeans in this way.

Method 2: sew in jeans

If you need to significantly reduce the size of your jeans, hot water will not help here. In this case, you can resort to a more time-consuming, but at the same time more effective option.

You can sew in jeans in one of two ways:

on the side seams
back seam

In the event that jeans are large for you both in the hips and in the waist, you will need to take them in on the sides. This is easy to do even if you don't have sewing skills. Open the side seams, then mark where the new stitching should go, and baste with thread. Next comes the sample. If the thing fits well, the seam is grinded, the jeans are tried on again, and after that you can cut off all the excess.

If the jeans are large at the waist, it is better to sew them in at the back seam.

To do this, first carefully unfasten the back loop. Then cut the belt exactly down the middle. On each half, make darts into which remove excess fabric. The amount of excess fabric can be determined during the fitting. Darts should not be made too long, otherwise the back pocket will bulge. Once you've tidied up the waistband, carefully sew it back onto your jeans and then put the belt loop back in place.

Other ways to shrink jeans

There is another way to reduce jeans by size - to take the excess fabric into the darts at the waist. These darts should be placed along the side seams, so they will not spoil the appearance of the thing. So that the finishing line of the side seams does not interfere, pre-stretch it. This method is applicable only if the denim is quite thin: not all home sewing machines can handle thick material.

Do not rush to immediately reduce jeans in size, especially if you bought them recently. Perhaps over time they will shrink even without the use of any special methods.

If you are completely unfamiliar with sewing, and are afraid to wash new jeans in hot water, you can contact any sewing studio. There you will be reduced the size of things to the required, while the work will be done professionally and efficiently. To achieve such a result at home is not easy, but still possible. In any case, which option you prefer is up to you.

Hello, dear readers of the site cutting and sewing site. Do jeans shrink? Certainly! And to sew in jeans along the side seams, this is the simplest thing that can be done. With the right approach, you can not even touch the rivet that secures the pocket near the side seam. It is also possible to sew in the belt. Believe it or not, jeans can even be enlarged at the waist. The belt in this case may remain "native". A belt is attached under the label in this case.

Can jeans be sewn in

So, you can sew in jeans. The question is how to get them. The proposed method is not quite standard. But first, let's see what happened before and what happens after.

Let's save abandoned flared jeans by making some kind of skinny out of them. Yes, just sew them on the sides. It makes no sense to do this on beautiful jeans. Better experiment with pants for which there is no feeling. who no longer receive any love.

Step 1: Turn Jeans Inside Out

By the way, it looks funny.

Step 2: Determine the allowance to be removed.

Pull excess fabric towards the side seam.
Starting from the knee line and to the bottom cut, using pinning, pick up excess fabric.
Both legs should look something like this

Step 3: Lay out the jeans

Carefully remove jeans (there are needles).

If there are jeans to look up to, then they can act as a template when comparing how the legs are pinned up. Just layer them on top and compare. The photo shows that the pins are pierced a little more than the template jeans. It's even good and normal. It is better to leave more. Big things can always be made small. You also need to focus on how the fabric stretches.

We smooth out all wrinkles. To sew in jeans along the side seams carefully, smooth out wrinkles from the side seam to the step. You may need to pierce a few pins. Main, make sure that the future seam along the entire length has no wrinkles.

Step 4: Draw the Seam Line

Using a ruler, create a straight line passing through the chipping points. At some point, the line will intersect with an existing seam. The transition must be smooth.

The cut line is drawn with perfectly evenly interconnected felt-tip pens. Better with a pen and marker. The purple line from the pen will be less visible than the black one. But on black it will be possible to expose the foot. In general, the thinner the stitching line is drawn, the more accurately you can lay a line. The indentation of the cut is approximately 1.5 centimeters.

Step 5: Sew a New Seam

First, let's try and sew between the stitching line and the cut line. We remove the pins as we stitch. If the legs need to be shortened, then you can undercut to the bottom cut. A fastener is placed.

Step 6: Remove Excess Material

We try on, if the width is amazing, then nothing needs to be done. It remains only to process the bottom cut. If the width is large, then we lay another line parallel to the one just laid. Focusing on the foot, we also sew in 1.5 centimeters. We use the previous line as a guide.

When we are satisfied with the width of the properly sewn jeans, we need to cut off the excess material. In this case, we cut along the first line.

The cut off surplus should match the shape as much as possible.

Step 7: Finishing the New Bottom Line

We turn twice. The slice will be closed. Each time the gates are ironed.

Step 8: Bottom Stitch

On a household machine, you can remove the sleeve platform. This will make it easier for the stitching on the bottom of the leg to run smoothly. Moreover, the bottom has become narrower, due to the fact that the jeans are sutured.

The bottom of the collar acts as a guide when laying a line. We sew starting from the step seam. We pass thickenings by turning the flywheel manually.

Step 9: Done

Jeans should lay out well on the plane.

How to sew jeans?

Jeans are by far the most versatile piece of clothing. We wear them in winter and summer, during work and leisure hours. It's comfortable and stylish... as long as the jeans fit you well. But what if the jeans are a little too big? In this article we will talk about how to sew jeans. Videos on this topic can be easily found on Youtube and also on this page.

We offer you instructions for sewing jeans. You will need:

centimeter,
ruler,
scissors,
tailor pins,
needle and thread,
sewing machine.

Important Points

Before we talk about how to sew in jeans, let's dwell on some important nuances. This is somewhat more difficult than , and here's why:

The main problem lies in the finishing seams, which are done on jeans with a contrasting thread. Their color and texture are difficult to reproduce accurately enough. However, if you pick up the threads to match, the difference will not be too noticeable.
Jeans are usually made from a dense material, and the seams on them are very thick. If your home machine is not designed for such a load, you will have to flash some sections manually.
For the same reason, sometimes you should not copy the denim seam “in the lock”. You can do with its imitation.
And finally, it is worth taking on this difficult task if you are going to sew in jeans for a size, in extreme cases - for two. Only then will the result be worth your efforts.

How to sew jeans in a belt

So you've bought new jeans and they fit great on the hips but are too big in the waist. This problem affects women more often than men, and is associated with the peculiarities of the female figure. Usually in such cases, jeans bulge at the back. Therefore, we will take them in at the back seam.

Step 1

Put on your jeans and use a measuring tape to measure your circumference at the waistband. Now take off your jeans and measure the length of your belt. Divide the difference between the two measurements by two. By this amount, we have to move the middle seam.

Step 2

Unlock the loop located at the back and the belt on both sides of it by 7-8 cm in each direction. Carefully spread the crotch a few centimeters to the right and left of the middle. Spread the middle seam, smooth it and pin it with pins, directing them perpendicular to the cut of the fabric. Set aside the distance from the old seam obtained in the first step. Using chalk and a ruler, draw a tangent to the curved section of the ripped middle seam.

Step 3

Stitch the jeans halves along the new middle seam. Trim the fabric 1 cm from the seam and finish the cut with a zigzag stitch. Iron the seam allowance and sew a double finishing stitch along the front side. Roll up the crotch again and topstitch along the right side.

Step 4

Now let's take a look at the belt. Attach it to the top of your jeans and mark where the belt touches the middle seam. Cut off excess fabric (don't forget the allowance!). Fold the halves of the belt with the right side and stitch. Iron the seam allowances and stitch the belt to the upper cut from the front side. If necessary, lay a finishing line. From the inside, it is better to hem the belt manually with a hidden seam. Sew on the loop again - it will close the seam on the belt.

How to sew jeans in the hips

Such a need may arise if you suddenly lost weight, but do not want to part with your favorite jeans. It can be even easier to sew jeans in the hips than in the waist, because the side seams are not always decorative, which means that your interference will be less noticeable.

The technology of operation is the same as described above. Only now you have to rip off the belt on the right and left and make two seams instead of one. In addition, rivets located on pockets may interfere with you. In this case, you will have to take the fabric from the back halves into the seam and use hand seams in the most inconvenient places. Try to hide the seams on the waistband under the side loops. And if you do everything carefully, the result will please you.

How to sew jeans in legs

Jeans almost never go out of fashion. But their shape can change from season to season. Now narrow models are relevant. Therefore, if you want to stay in trend, you can redo last year's pair.

Wear your jeans inside out and arm yourself with a pack of tailor's pins. standing in front of mirror, pin the fabric on both sides on one of the legs from the inside. Remove the jeans and draw a seam line so that it is even. Using pins and tailor's chalk, copy the line on the second leg also from the inside. Baste the seams and try on the jeans.

If everything suits you, you can proceed to stitching the seams. Before that, you need to undo the hem of the legs, and after sewing the legs, bend and hem the jeans again.

Tips on how to sew jeans on the sides, at the waist, how to alter flared jeans.

Many people have jeans or even a few pairs in their closet that they haven't worn in a long time. Perhaps the thing has gone out of fashion, or maybe the jeans have become too big or small. Today we will talk about the case when jeans became great. Namely, how to properly sew them in.

How to sew in men's and women's jeans on the sides?

Important: It’s worth saying right away that sewing on jeans on your own is not as easy as it might seem at first glance. If you are not confident in your abilities, it makes sense to contact the studio. Otherwise, you can simply spoil the thing.

However, if you think that your sewing machine should not just gather dust, but work, you can try it. Just do not forget, this is the case when they say "Measure seven times, cut one!".

For work you will need:

Sewing machine
Scissors
Tailor's pins
Threads
Overlock
Ripper
Chalk or bar of soap

First, try on your jeans to determine where you need to sew in the product. If you need to remove excess fabric only on the sides - this is one way, and if you need, for example, to sew in the hips - there will be another technique.

Let's discuss all the options one by one. Immediately, we note that women's and men's jeans are sutured in the same way.

You can often find extremely simple tips on how to quickly sew in jeans on the sides. The bottom line is this: put a model that fits your size on top of the old jeans, cut off the excess and sew. Of course, this is by no means the case.

Important: It will not work to sew in jeans only along the side seam, it is necessary to sew in both the side cut and the inner one. Otherwise, the product will be twisted.

If the jeans fit perfectly at the waist and it became necessary to remove a little fabric from the sides, you can do this:

Put on your jeans inside out.
With tailor's pins, mark the places where you need to take in, first on one leg.
Do this with the inside seam and the outside.
Without tearing or cutting anything, take off your jeans.
With chalk or remnants, mark a line for the line.
Sweep the product by hand.
Try on jeans again, sit down, walk around.
Make sure your jeans fit properly.
Only after that you can cut off the excess 1 cm further from the future seam.
Now it's time to sew the jeans on a typewriter with threads that match the color.
Sew the finishing stitch along the outer edge of the jeans with double thread.
Iron your jeans carefully.
Finish the cut edges with an overlocker.

Video: How to sew jeans on the sides?

How to sew jeans in the hips?

You can try to sew in jeans only in the hips. This is appropriate in the case when the hips are narrow, and only the jeans are large in the hips, but sit normally on the legs.

Important: You can sew in jeans in the hips if you need to remove no more than 4 cm. Otherwise, you will have to flog the codpiece, which is often beyond the power of a novice needlewoman.

Jeans can be sewn in a few centimeters

You can remove excess tissue on the hips in this way:

Open the side seams.
Open the middle seam around the buttocks.
Sew, taking into account the necessary preliminary measurements.
The edges must be sewn strictly in the same style as the old seams, otherwise it will look ridiculous.

Important: It is almost impossible to sew finishing lines without experience. Therefore, we suggest that you familiarize yourself with this process by watching a video tutorial.

Video: How to sew a finishing line?

How to sew jeans on the pope along the back seam at home?

To sew in the back seam of jeans, you will need the sewing tools listed above. Sewing jeans by hand in this place will not work.

So let's get started:

First, put on your jeans.
It is inconvenient to make basting in this part of the body on your own, ask someone to help you remove the excess and make a basting with pins.
Then you need to cut off the belt.
After that, you will have to rip the back seam, it is not difficult to rip it.
Measure with a ruler the same distance between the old seam and the pins on both sides.
With a remnant, draw a cut line, do not forget to leave a 1 cm allowance.
After that, baste the seam, then try on the jeans.
If the jeans fit well, you can sew a seam on a typewriter.
Overlock the cut with an overlocker.
On the front side, make finishing lines.

How to narrow the back of jeans

How to sew jeans on the pope

Now you need to properly trim the belt:

Shorten it to the desired length by cutting off the fabric on both sides.
Sew the sides of the belt together.
Then sew the belt to the jeans, make a finishing line.

How to sew jeans in the waist, belt?

If the jeans are large in the waist, it is best to take them in, as described above - along the back seam. If everything is done correctly, they will sit well on the pope.

If the jeans are too big in the waist and you don't want to bother, you can narrow the waist a little in an easier way.

You will need:

Rubber
Scissors
Sewing machine
Regular pin (in another way English)

Let's get to work:

Take a small piece of elastic. The length depends on how much you want to shorten the belt.
Make slits in two places in the belt (the distance between the slits is a few cm longer than the elastic band).
Now thread the pin through the elastic band and pull it along with the elastic band between the slots.
Pin with a pin to the jeans so that the tip of the elastic does not “run away”.
On the sewing machine, sew two stitches from both ends.

Pull the elastic in

How to sew jeans in a belt: before and after

Video: How to sew jeans at the waist?

How to sew in, narrow in the legs flared jeans, straight to narrow at home yourself?

The now unfashionable flared jeans can be narrowed and get modern skinny.

Important: You should not try to make skinny jeans from flared jeans if the flare is initially too wide. The cut is completely different, the result will not please you.

It makes sense to narrow the flare by a few centimeters (3-4 cm). In this case, arm yourself with sewing tools and get to work:

Iron your jeans and try them on.
Have someone help you pinpoint the inseam and crotch.
Open the folds, as well as the side and crotch seams.
Draw seam lines with chalk or a bar of soap.
Leave an allowance.
Cut off excess fabric.
Baste the seams by hand.
Try on jeans again, walk around in them, try to sit down.
If everything fits, you can sew the seams on a typewriter.
Finish the edges with an overlock or zigzag.

Flared jeans need to be sewn on both sides

How to sew in men's and women's jeans a size smaller?

Important: Jeans can be sewn in a size, a maximum of 2 less. It is easier to sew new jeans than to take them in more than 2 sizes.

If you do take the risk, be prepared to completely recut your jeans.

To downsize your jeans, put them on and take a close look at exactly where they sit ugly.

Try to choose the easiest way to rework, with minimal labor investment and the best possible result.

There are several ways to change jeans a size smaller:

Cut off the excess on the sides and the inner seam.
Sew along the back seam.
Remove a little in the hips only on the sides.

A few simple rules for successful sewing jeans:

Jeans, both women's and men's, are altered according to the same principle.
Before starting work, wash the product and iron it.
It is advisable to find an assistant (-tsu) to help you make correct and even marks.
Do not rush to cut off the excess, it is better to finally make sure that you are doing everything right.
Remember, there are some models that are not subject to redrawing.

How to sew jeans to size

How to shrink jeans at the waist without a sewing machine?

The above tips are suitable for those who have a sewing machine. If you do not have the opportunity to sew in jeans on a typewriter, you can resort to other methods:

Wash the product in water with a temperature of 90 °, the fabric will sit down for a while, however, then the jeans will become large again.
Choose a suitable belt if you need to collect only at the waist.
Sew the elastic by hand into the waistband.

In principle, it is possible to sew on the legs by hand, but it will not look aesthetically pleasing, finishing stitches cannot be done manually either.

Finally, I would like to say, if you are not sure of a good result, it is better to take your expensive thing to the studio, professionals will do everything right. However, following the advice, you can take in your jeans so that you can wear your favorite thing again. We hope everything works out for you. We suggest watching the video to better understand how to alter jeans.