How to find out the size of the ring with a thread. How to determine the size of the ring at home in accessible ways. How to find out your finger ring size from another ring

We warn you right away: there is nothing complicated in choosing the right ring size. Everything you need to know is already in this article. Just follow one of the tips below.

Method number 1

If you have a ring handy but still don't know your size, just take a ruler and measure the inside diameter of the ring (at its widest point). The number in millimeters that you see on the ruler is the size of the ring. For men, it is 19 or 23 mm, (respectively, the 19th and 23rd size), and for women from 15 mm and above (respectively, the 15th size).

Method number 2

Print out a table with actual ring diameters.
Place a ring on each circle in turn and find the one whose diameter most closely matches the diameter of your ring.
If the size varies between the two options, choose the larger one. The line should be inside the ring, not outside, so you will measure the size accurately and correctly.

Download "Table with ring diameters" (PDF)

Method number 3

You will need a small piece of thread, twine, or a thin strip of plain white paper.
Wrap it tightly around your finger, but not too tight.
Remember, or mark with a pen the connection points of the edges of the thread or paper.
After that, attach the resulting segment to the ruler printed in the PDF document. All dimensions are in natural size, which does not require the calculation of special formulas, etc.
If your size falls between two marks, choose the larger one.

Download "Control line" (PDF)

Method number 4

Download "Measuring tape" in PDF

Method number 5

The size of the ring can be determined using an ordinary thread, wrapping it around the finger. Do not clasp his phalanx too tight, as well as too loose. Make a mark where the ends of the thread meet. Using a ruler, measure the resulting segment.
The table will help determine the size. Or you can simply divide the result by 3.14.

size table

In order to know exactly your ring size in the future, follow a few tips. Do not pick up rings:

in the morning;
during critical days;
after the flight (in the transit zone of the Airport);
after playing sports.

After a night or a long flight, a large amount of water remains in the human body, which leads to swelling of the limbs. The same principle applies after a grueling workout - the fingers are still swollen and those rings that puff up at the right time will become too big for you in a couple of hours. This will lead to discomfort when wearing jewelry - the ring will constantly slip and twist. In addition, a large ring is very easy to lose.

do not measure rings in very hot or cold weather - fingers also swell;
it is best to pick up rings during the day, in a calm state, at a temperature and well-being that is comfortable for you.
to determine whether you are comfortable in a ring, simply clench your hand into a fist several times. No discomfort? The size is correct. Presses, "bites"? The ring is not enough.

Tips for men: how to discreetly find out the size of the ring of your beloved

Method number 1: temporary abduction.

Take one of the girl's rings and take it to the jewelry store. Ask the seller to determine the size of the jewelry. Attention! You must remember exactly on which finger your beloved wears this ring. On the right hand, all fingers are half a size larger than on the left. Therefore, be careful. If the ring finger of her left hand is 16 cm, then the right one is 16.5. The rule applies if your favorite is right-handed, if left-handed - everything works the other way around.

Method number 2: try on yourself.

If a girl already has a ring that she wears on the ring finger of her right hand, finding out the size is easy. Just wait for the moment and try on her jewelry for yourself. Put the ring as deep as possible on your finger (any) and mark this place on the skin with a pen. Remove the ring and measure the diameter of the finger at the mark. Calculate the size according to the table above.

Method number 3: best friend.

Ask the girl's best friend to unobtrusively find out the size of her beloved's ring. Only on the condition that she knows how to keep secrets!

Method number 4: operation "Ninja".

The main thing here is the speed and dexterity of your hands. When the girl is sleeping, wrap her finger several times with a thick thread, tie it in a knot, and carefully cut it with scissors. Measure the resulting segment, compare with the size chart. Keep in mind that the ring must pass through the knuckle, which is always wider than the base of the finger, so do not tie the thread too tight. And always round the result up.

Method number 5: draw a little.

Steal her ring for a few minutes. Lay the decoration on a sheet of paper and trace around the inner circumference with a pen.

Important point when choosing a ring directly: pay attention to the thickness of the shank. If it is thin, the ring must be bought back to back. For example: if a girl has a size 18, you buy a thin wedding ring of strictly 18 size. But a wide ring should be taken already 0.5 sizes larger. Remember that you can increase or decrease only a ring with a smooth base. And that's half a size. Max size. If the shank is strewn with stones - such a ring cannot be modified!

Zlato.ua told the easiest and most affordable ways to find out the size of the ring. Now you can confidently choose rings in our online store, even without trying them on.

Going to buy an engagement ring, men often try to take jewelry from their beloved's jewelry box and purchase an item of the same size. The stronger sex knows that different fingers are not the same in width.

However, gentlemen often do not suspect that the fingers of the same name on different hands are different. The ring finger on the working hand of right-handers is about 0.3 mm thicker than on the left. Left-handers, on the contrary, have a smaller width of the ring finger of the right hand. Therefore, grooms, and indeed anyone who needs to determine the size of the ring at home, it is better to resort to accurate calculations. Here are some formulas for success.

Cut off a strip of paper, wrap around your finger. Mark the connection point and cut off the excess. Measure the length of the workpiece. The resulting figure is the circumference of the finger. Find it and the size of the product corresponding to the number in the table below.

Finger circumference in mm.	Appropriate ring size
47,60	15,5
50,80
52,40	16,5
54,00
55,60	17,5
58,70
60,30	18,5
61,90
63,50	19,5
65,10
66,70	20,5
69,90
71,50	21,5
74,60

The width of the strip of paper should approximately match the dimensions of the ring you plan to purchase. The fact is that wide products require more space between them and the finger, otherwise the decoration will be difficult to dress and crush. Thin rings are always ¼, ½ the size smaller than their massive counterparts.

Check that the paper ring goes through the joint, getting stuck on it a little. This requirement is also true for a real ring. If the jewelry will be dressed with ease, it will easily fall off.

Consider the season in which you take measurements. In winter, the fingers get a little thinner. In summer, on the contrary, the size is slightly larger than the true one, due to the expansion of tissues in the heat.

Fingers swell and in pregnant women at any time of the year. If the jewelry is intended for a future mother, it is better to choose not a solid model, but with divided edges on the back. Such a product can be compressed when the edges are closely adjacent to each other, and can be stretched when there is a gap between them.

Print out a narrow line using the printer. Cut out the blank and wrap it around your finger. So you do not have to separately measure the paper tape. There are ready-made schemes for printing on the Internet. Instructions are included with each.

Take a dense cotton thread (preferably for crocheting). The surface should be smooth, and the length should be approximately 50 centimeters. If the thread is shorter, the calculations are inconvenient.

It is necessary to make five turns around the finger, cut off the excess, measure the length of the workpiece with a ruler. Take the number not in centimeters, but in millimeters. It should be divided by 15.7. The resulting number will be the desired size of the ring. The indicator should be rounded up to the nearest half millimeter. For example, if the total is 17.3 mm, you should purchase a product for 17.5 mm.

There are no sizes 17.3 or 19.7. Patterns provided in jewelry stores are split only by half a millimeter. By the way, the size of a ring is nothing but its diameter. It is this figure that interests the sellers of the store.

If you decide to buy a set with a bracelet, then, for sure, you will need its size. It is determined even easier than that of the ring. The size of the bracelet is not the diameter of the inner side of the product, but the girth of the wrist in centimeters. It is enough just to use a centimeter tape or a regular thread.

Measurements should be taken exactly in the place of the hand where the jewelry is supposed to be worn. Now it is fashionable to wear bracelets above the elbow. Some people like products dangling on the wrist. Others, on the contrary, are samples that fit snugly to the hand.

Note to travelers

People go to Milan, Paris, New York not only for clothes, but also for jewelry. In order not to make a mistake with the choice, you should familiarize yourself with the discrepancies between the Russian sizes of the same rings and foreign ones. In addition to the domestic, there are two scales - American and English.

In the first, the designations, as in Russia, are digital. In the second - letters. Below is a table of sizes for all three systems. Since there are more standards for rings in the USA, non-standard domestic sizes with quarter millimeters have been added to the list.

International Ring Size Conversion

		Russia	USA	England
Ring size
		15 ,5
	15,75

	16,5
			6 , 5
	17 , 25
	17,75

	18,5

	19 ,5

	20,25		10,5
	20 ,75
			11 ,5
		21,25
		21,75	12,5

So, when buying a ring outside of Russia, it is worth remembering the size difference. They coincide with domestic ones only in Germany and neighboring countries. There are also non-standard options. So, there are people whose finger width does not allow using finished products. They have to be improved. The service is available in almost all jewelry stores and workshops. At the request of the client, the ring can be enlarged or reduced.

When purchasing jewelry, you should definitely try it on. In fact, the size of finished rings sometimes fluctuates. Instead of 18.5, the product may have an indicator of 18.6 or 18.7. These are production costs, especially manual ones. It is difficult to meet standards down to the millimeter. Therefore, if you buy for yourself, it is better to play it safe. Differences are usually minimal. But, sometimes this is enough for the ring to press a little or, conversely, fall off.

Looking for rings on the pages of specialized stores, but do not know which product is right for you? Measure the diameter of your finger yourself or go to a store that offers such products. You will be prompted how to find out the size of a finger for a ring, or they will make the necessary measurements.

If you decide to proceed without outside help, remember that the value may not be accurate. For such methods, errors are permissible. Please consider this information before placing an order and making payment.

By measuring the ring, you get its inner diameter, this is the desired value. When it is required to measure a finger, they are guided by the diameter of the middle phalanx. All numbers are displayed in millimeters.

Knowing the desired indicator, you can easily pick up a ring for yourself or another person. Find a suitable home method for yourself or apply several methods, then by calculating the average value you will find out the exact diameter.

Basic measurement methods

use the table

Determining by table is the easiest option. Print out the actual diameters of the rings, and then attach the ring you have to the circle that matches it the most.

If there are two suitable diameters, choose a larger value. Focus on the line that is inside the ring, and not on the outside, then the size will be correct.

Take measurements with a paper strip

Prepare narrow paper (0.3 cm wide) of short length (12 cm is enough). Go through the following steps.

Wrap the prepared paper around the finger on which you plan to pick up the jewelry.
Fix the strip and draw a line at the point where its sides touch.
Keep in mind that the product will pass through the joint - measure the thickness of the finger in this area as well.
You have two values, calculate the average.

Let's figure out how to determine the size of the ring on the finger with a thread. It is important that the prepared thread is strong, of medium thickness. Proceed according to the following scheme.

Wrap the thread around the desired finger, making sure that it does not squeeze the joint too tightly.
Carefully remove the thread from your finger without disturbing its integrity.
Divide the thread into two equal parts.
Measure half of the thread with a ruler.
Use the figure in millimeters, divide it by 3.14.

If you decide to use this method, getting the right diameter will be very easy for you. For example, if your finger circumference is 58 mm, then your size is 18.5.

Other Methods

We will explain how to measure the size of a finger for a ring using other methods. Perhaps they will be more convenient for you to use.

The methods available for independent use include the mathematical method and the method of measuring with a control ruler. Delve into their essence and choose the one that you think is the most accurate.

We will tell you how to find out your ring size using the knowledge of mathematics. There is nothing complicated in this method, you just have to make some calculations.

Use a thread or paper strip.
Determine the length of the part of the strip that wrapped around your finger.
Divide the resulting figure by π (3.14), this will be the desired diameter.
To make sure what ring size is yours, see the data presented in the table.

Thread or paper length, mm	Diameter decorations
47,12	15
48,69	15,5
50,27	16
51,84	16,5
53,41	17
54,98	17,5
56,55	18
58,12	18,5
59,69	19
61,26	19,5
62,83	20
64,4	20,5
65,97	21

Explaining how to find out the size of a ring on a finger, we suggest understanding this technique. To implement it, prepare a thread or narrow paper.

Place the material on the phalanx, as close to the joint as possible, and determine the point of contact.
Do not press too hard, allowing the strip to move freely over your finger.
If you used paper material, make a cut in the area where the joint occurred.
If you use thread, wrap your finger with it. You will get a ring that should be divided into two parts.
Attach the material to the printed control ruler (available on the Internet). The length of the printed and used strips must match. Find the right option.

Do not choose a ring in the morning, because after a night's rest, a lot of water accumulates in the body and the fingers swell slightly. Choice after sports is also not recommended.
In hot and cold weather, you should also not take measurements, as the ring may be large.
Determine the desired values during the day. To get an error-free result, measure your finger three times throughout the day - at different times of the day, and check the difference.
Calmness is as essential as a comfortable air temperature.
If you do not know how to determine the size of a ring on a girl's finger, take her ring and go to a jewelry store with it. They will tell you the right size and help you choose the right product. Can't take the ring with you? Place it on paper and trace around carefully. Since the thickness of the decorations varies, trace the inside, not the outside.

Conclusion

Now you know how to find out the size of your finger in a variety of ways. If you are not lazy and ready to act independently without the involvement of specialists, implement several measurement options. Get the average value, this will be the number you need to buy jewelry.

We hope that the tips on how to measure your finger size will be effective for you, help you quickly and accurately solve your problem.

We all have to deal with the choice of a ring on a finger at some time - this is always an exciting moment, so you need to know how to correctly determine its size, so as not to run to a jewelry workshop to reduce or increase it.

If you always thought that the size of the ring is determined by its diameter, then you were wrong! Jewelers calculate ring sizes along the length of their inner circumference and nothing else! In this case, this length should correspond to the girth of the finger for which you want to purchase the ring.

There is a special ring size chart, which in different countries differs in its numbering of one size or another. This is very convenient, because, knowing the girth of the finger on which you want to put the ring on, using the table, you can order or buy it in any country.

Ring size chart

Experts recommend that women buy rings with fitting, i.е. it is best if you put it on and take it off several times before buying it. It is advised to do this in the middle of the day, because. in the morning and in the evening, the fingers may swell and the ring will fit more tightly to your finger. The temperature regime at which the fingers can become thicker will also play a role.
In every jewelry store there is always a finger gauge - this is a set of rings of various diameters that will help you choose the right size for your future jewelry.

If the purchase involves the absence of the person to whom the ring is intended, then approximate size can be found by gloves or even clothing size. Accordingly, if the size of clothes varies from S to M, then most likely the ring will be at the time from 15.5 to 17.5, if more, then the ring should be looked after from size 17.5 and above. Remember one thing: any ring that is large in size, the jeweler will be able to reduce, but it is not always possible to do the opposite!

An important role in the choice of the ring is played by its width. Wide rings suggest free space around the finger, but narrow rings just don’t! Keep in mind that the width and size of the fingers on the left and right hand can differ significantly, so it's better not to risk it, but measure the girth of the right finger well.

Self-sizing of the ring:

1. Wind the thread around your finger 5 times, then fold the two ends of the thread and cut off at the base, count the length of the entire thread and divide it by 15.7. The result will be the estimated size.

2. Wrap a piece of thin paper around the finger without bending it at the joint line to form a circle, then measure its length and see the result in the table.

3. Take a school ruler, where there are circles of different diameters, try on a finger in them and thus determine the size.

Christina Tsurtsumiya

2015-02-12 12:00:00

Sooner or later, the moment comes when a man decides to end his bachelor life and propose to his girlfriend. The main difficulty faced by the representatives of the stronger sex is not at all the scenario of the marriage proposal, but the size of the ring. You need to know it as accurately as possible and at the same time not give a surprise.

Here are some simple ways to find out the size of the ring so that she does not suspect anything.

Method number 1: agent 007

One of the most accurate ways is to discreetly take the ring from the girl that she wears on her ring finger.

When it works: If you have access to your girlfriend's jewelry box, which contains several rings that she constantly changes. So the beloved will not have time to notice the loss until the time you return the trophy to its place.

Don't miss! It is necessary to take exactly the jewelry that she wears on her ring finger. In order not to get confused at the sight of sparkling and, in your opinion, similar products to each other and to accurately identify the “victim”, watch your girlfriend for a while. Then you will definitely remember the right ring.

Action plan: Learn from the good old Bond: the main thing is the clarity and speed of action. Take the ring to the nearest jewelry store, where the seller will easily determine the size using a ring gauge.

Then discreetly return the jewelry to its owner. And - mission completed.

Method number 2: without noise and dust

Another proven method is to take measurements yourself, as they say, at the crime scene.

When it works: If a girl does not part with her favorite ring, and it is not possible to “steal” it, she will have to act in the field.

The hardest part is being in the right place at the right time. If she removes her jewelry before going to bed, washing dishes, cooking or other household chores, don't miss the moment!

Otherwise, you will have to create "favorable conditions" yourself.

Action plan: When the girl leaves the room, put the ring on a piece of paper and circle it along the inner (!) Outline. The diameter of the resulting circle, measured in millimeters, will be the size of the ring. However, you can go to the store directly with a picture.

If you are not strong in geometry or simply do not trust your artistic abilities, leave an imprint of the ring on some kind of plastic material, such as plasticine.

So that the plan does not fail, stock up on everything you need in advance. And don't forget to get rid of the evidence.

Method number 3: measure seven times

A quick and reliable way is to try on the ring yourself.

When it works: In the event that the cherished decoration lies unattended, but time is limited, and there is a threat that your cunning plan will be revealed. Or just not at hand

turned out to be the necessary "tools". And even if you trust your visual memory.

Action plan: Put the ring on any finger and remember the level to which it fits (for fidelity, you can make a mark with a pen). In this case, the decoration should sit most comfortably.

In order not to arouse suspicion, bandage the finger with the mark or stick it with adhesive tape.

Method number 4: reconnaissance in force

You can try to find out the size from the girl herself. True, as a real intelligence officer, you will have to lull her vigilance and show miracles of conspiracy.

When it works: This method is suitable if your girlfriend likes to take psychological tests like those printed in glossy magazines.

Action plan: Find some kind of compatibility test (for example, "Find out if you are a good match for each other") and adjust it by including the right question in the questionnaire. It is advisable that you answer the questions separately, and then compare the answers. This is the only way you can get the information you need.

Keep in mind one “but”: a girl may suspect “something is wrong” if up to this point you answered all her offers to pass such tests: “What nonsense!”.

Method number 5: joint creativity

Show your imagination and perpetuate your love. And at the same time, find out the right size.

When it works: If you are a fan of unusual surprises and crazy ideas and often indulge your soulmate with your inventions. Agree, to receive such an offer from a serious business person is at least strange.

Action plan: Invite your loved one to make a joint handprint on art clay or other materials that are now fashionable. Paper and bright gouache are also suitable for this.

Combining business with pleasure, you will have a great time with your beloved and, in addition, you will know the size of her finger. Perhaps the most difficult thing is to get the resulting art.

Method number 6: glove

Do not despair if all the previous methods do not work for some reason, or if your girlfriend does not wear rings. Remember Cinderella's glass slipper? The principle is the same, only instead of a shoe, a glove of your beloved.

When it works: When the gloves are made of thin leather. All other materials will give a strong error.

Action plan: Once you have the “accidentally left” gloves, grab them and rush to the jewelry store, where they will help you determine the size of the ring. In extreme cases, you can ask sellers to try on an accessory. The hand of the one that the gloves are suitable for will become a guideline when choosing a ring for the future bride.

Alexey 31.08.2019

take her ring and try it on - well, how else? or choose together in the store. The process of choosing and fitting is also a pleasure. Answer

Olga 12.08.2019

The easiest option, which will not arouse suspicion, is to admire the size of your beloved's fingers, compare them with your "huge" fingers, to top it off, remove the ring from her finger, put it on yours, notice to what level the ring fit. And run to the store))). Answer

Olga 25.07.2019

good tips and ideas. but the most effective and accurate way to take her friend as an ally, who, without any suspicion, will know the size of the ring))). Answer

Inna Koval 23.07.2019

There are no solutions for this. I liked the idea of having a ring around it inside. The main thing is to get a ring for this of course. Answer

Oksana Ivanova 07.07.2019

You can send a friend to find out her size. Or a mother, for example. Tips are cool especially circle the ring on the inside. Answer