Origami paper bear for kids. How to make an origami bear - a step-by-step diagram with a photo. Video: Assembly lessons for different bear models

1. Mark two diagonals on the square and bend two opposite corners towards the center.

2. Fold the two edges back to the center line. To perform this action, it is better to turn the figure to the opposite side.

3. Fold the right and left edges towards the center vertical, pulling the pieces at the back outward. Rotate the figurine.

4. Bend the bottom back.

5. Pull down to the stop two triangles inside the figure. Open and flatten the left edge of the figurine, folding it in front and behind along the indicated lines.

6. Open and flatten pockets.

7. Bend the triangle back on the left, and mark two lines in the middle of the figure.

8. In order to perform this action, flatten and bend up the edge of the paper passing from the bottom in the middle of the figure.

9. Mark two lines. Holding the figurine in the circles, raise the triangle of the future head.

10. Bend the two triangles on the left and fold the oblique edges of the figure.

11. Push the future head onto the body and bend the right side outward.

12. Bend inwards the back triangle in the back area and bend the two triangles in the chest area. Concave the bottom triangle.

13. Bend the triangle in the back area into the resulting pocket. Open and flatten the triangles of the ears. Form a muzzle. The triangle that is bent on the right should be inside the figure.

14. Open the ears, making them voluminous. Form the paws. Origami bear is ready.

Everyone knows the origami technique, even in kindergarten we are taught to fold interesting things from an ordinary sheet of paper. Yes, and adults rejoice like children when in their hands a colored sheet comes to life and takes on a funny shape of an animal or object. And to assemble a craft from modules is to build a real origami constructor.

Today we have an origami bear coming to life from ordinary brown paper, as well as from a variety of modules. With step-by-step instructions, even a novice needlewoman can cope with this difficult, but original technique.

This master class will teach us how to fold a paper bear from ordinary colored or white paper. A detailed assembly scheme will help even a novice craftswoman to cope with the work. As a result, we will get a bear, as in the photo:

To work, you only need a square sheet of colored or white paper, any size, but not too small to make it easier to do crafts.

How to assemble a figurine step by step. We turn over the bear blank so that we get a rhombus. And we bend the corners along a predetermined line (by eye) to the center, as in the figure. Now it bends both edges back to the top line, so that it turns out evenly, we turn the workpiece over in advance.

We bend the right and left edges to the center, while pulling the back out. And again we turn over the future origami bear. We bend the workpiece in half horizontally.

Now we carefully pull down the 2 triangles that are in the figure. At the same time, we open the flattened left edge of the workpiece and bend it along the marked lines, as in the diagram. Open the pockets and flatten them.

Only at first it seems that everything is complicated. In fact, we have already managed to make almost half of the bear. Now on the left we bend the triangle back and outline two lines in the center. We follow the scheme of work.

We outline 2 stripes and raise the head of the origami bear cub. We perform bends according to the scheme, thereby drawing the body of the bear with our own hands.

We set inward the triangle on the back, which is located behind the workpiece, and also bend two triangles on the chest of the clubfoot.

And finally, we bend the triangle on the back into the resulting pocket, open the ears. We form a muzzle, while the curved element is inside.

It remains to form the paws and give volume to the ears and our origami paper bear is ready!

In the master class, we learned how to make a neat and beautiful paper bear, the work is painstaking and rather complicated, but with due perseverance, anyone can do it.

Video: Bear origami

3D teddy bear from origami modules

In this MK we will assemble a beautiful modular origami Bear. We will use standard modules (m.) - triangles assembled according to a template:

Folding each row in stages, in the end we will get a beautiful bear, as in the photo:

According to the instructions, for work we need brown (K) and beige (B) modules, the number of which can be changed depending on the desired size of the teddy bear. As well as self-made ears, eyes and paws (cut out of paper and glued together).

We present a detailed description of the assembly in the form of a table with a photo and the number of elements for greater clarity:

In such a simple and visual way, we have collected one of the ideas of a pencil stand in the form of a bear.

If you want to try something different, here is an origami teddy bear in the form of a diagram for assembly. Try and experiment!

Many people find it easier to watch video material in order to understand how to assemble origami or fold modules correctly. Especially for this, we suggest watching a few videos on creating bears.

A little effort and a simple sheet of paper turns into a cute bear figurine. Such magic is called in one word - origami.

A paper bear made using the origami technique will bring a smile to the face of an adult and delight a child. It is not difficult to make such a figure, but it will require two square sheets of colored paper. The color can be anything, even if only white office paper is at hand, start creating anyway. Cut off the excess, turning the rectangles into squares, and start creating!

Fold one sheet diagonally and in half on both sides.

Then connect the top axis with the left one so that the sheet is concave inward. Do the same with the right and bottom axis, resulting in a triangle.

After that, bend the top of the resulting triangle to the center and unfold the sheet. In front of you is a square bend.

Turning the triangle over, bend the side perpendicular to the opposite so that the bend passes through the center of the figure.

In the next step, connect the centers of the legs and connect them by pointing down the figure. As a result, you will get a rhombus - press its upper faces to the lower ones.

To give the origami bear the missing volume, fold exactly the same figure from the second square sheet. On one side, fold small triangles to the main figure.

Hide the small triangles visible from the back.

Make a fold towards the center.

Fold the sides perpendicular to the folds obtained earlier to create new ones.

Bend the upper part of the resulting triangles in half, and tuck the protruding one.

Lift both sides up diagonally and fold them to the central part of the figure, resulting in a white triangle.

On the reverse side of the figurine, make folds, forming ears. To form a muzzle, slightly bend the triangle and push the fold line.

From the second part, fold the figure.

Bend both sides to the center. Legs are easy to get by bending the extreme corners of the figure to the center and lifting them up. Create a kink to form a triangle and straighten it along the camber.

Connect both parts into a finished figure.

Now you know how to make an origami bear, practice to demonstrate your skills to friends without looking at the diagram. Read more about the origami technique and its types. Look for other master classes in the "Needlework" section.

Visit us more often to plunge into the world of women's hobbies and find a new hobby for yourself.

Paper figures are not only interesting to make, they can also be used for staging home performances. The bear is a frequent character in folk tales, so it will definitely come in handy in many home productions. Younger schoolchildren and preschoolers can easily cope with making a bear out of paper with their own hands.

How to make a paper bear toy with your own hands?

To make a paper bear, we need:

brown paper;
yellow paper;
glue;
checkered paper;
scissors;
black pen.

How to make a paper bear

Let's make a pattern for a paper bear. It should consist of the following parts: head, muzzle, torso, tummy, front paw, palm, hind paw, two ear parts. We draw these parts of a paper toy on paper in a cage and cut it out.

Take brown and yellow paper and cut out the details of the bear using a pattern. From brown paper we cut out the head, torso, two front and hind legs, two ears. From yellow paper we cut out a muzzle, a tummy, two small parts of the ears and two palms.

On the details of the muzzle, draw the nose and eyes with a black pen.

Glue the muzzle to the head.

We roll the part of the bear's head into a tube and glue it.

Glue the tummy to the part of the bear's body.

Let's fold the part of the bear's torso and glue it.

Glue the body of the bear and the head.

Glue yellow pieces to the brown parts of the ears.

Glue the ears to the bear's head.

Glue yellow palms to the front paws.

Roll the details of the bear's hind legs into tubes and glue them together.

Glue the paws to the body of the bear.

The paper bear is ready. By slightly changing the pattern, you can make several bears of different sizes, for example, for the fairy tale "Three Bears".

An accordion paper bear is a great and easy craft for kids. The technique is popular, taking it as a basis, you can make a lot of funny animals and birds.

The following materials are used in the work:

brown cardboard;
Orange cardboard;
A simple pencil, compasses, scissors, glue stick;
Markers.

Paper bear accordion step by step

We make the torso

The body of the bear is long strips of cardboard folded into an accordion.

Cut 2 strips across the entire long side of the A4 paper. If you need a large bear, you need to cut off two more strips and glue them to the ends of the first ones. Or, initially, use larger paper so that you can immediately cut out the strips. The width of the stripes is selected based on the size of the bear. In this master class - 2 cm.

Apply glue to the tip of one strip and glue another strip to it to form a right angle.

Start making an accordion by moving the strips one by one on top of each other. For example, first point the bottom up and press, then the right strip, etc. You do not need to use glue at this stage.

But when both strips form an accordion, the tip must be glued.

Draw and cut out the double legs. The top should be slightly wider than the accordion to make the bear look stocky and clumsy.

Glue both parts in front and behind the accordion and the body will take a stable position.

We make a head

The easiest way to create a bear head is to use ordinary circles. After all, even kids draw a completely realistic bear using small and large circles.

Using a compass or stencil, draw and cut out:

From brown cardboard, a large circle that will be the bear's head;
Two small brown cardboard circles - for the ears;
Orange circle - for the muzzle;
If desired, make a small accordion neck, using the same technique as the torso. That is, use thin and small stripes.

Glue ears, a muzzle on a large circle-head, draw semicircles in the ears, a nose, a smile and eyes. The latter can be made of paper, use purchased moving eyes.