Crafts from modular origami with diagrams. Modular origami. Japanese magazine with master classes

In the world of needlework, there are a lot of ideas, the implementation of which allows you to make simple crafts for the New Year or for another holiday to please yourself and your loved ones. Modular origami for beginners is a very interesting activity. A person can learn how to create small figures from modules quite quickly, it's easy. There are simple schemes on the Internet, the description of which will allow you to make a rooster out of paper, a temple, a flower, etc.

Modular origami for beginners is a very interesting activity

Step-by-step instruction:

1. There is an option to purchase separate paper for modular origami in the stationery store. But for assembling a rooster, plain colored paper is also suitable, however, it is thinner. It is recommended to use yellow material.
2. A square sheet of paper is folded in half. The resulting side strip should be folded and cut along the fold line.
3. The paper is then folded in half to form a rectangle.
4. It is important to ensure that the top and bottom edges match. The fold line should be ironed.
5. After that, the sheet unfolds. The square is folded again, only this time on the other side.
6. The paper is folded vertically, that is, from left to right.
7. After the fold is made, the leaf unfolds. If everything was done correctly, then there should be a cross in the center of the sheet.
8. The upper right corner is applied to the lower left corner. Then a fold is made. The action is repeated, but only on the other side.
9. The right bottom side of the paper with the crease is folded towards the center. The resulting square is folded into a rhombus. In this method, triangular leaf shapes should not be obtained. If the figures of triangles were formed, this means that the needleworker did not follow the plan correctly.
10. The corners of the figure must be collected towards the middle. The top corner is adjusted to itself. Next is the fold. Three other folds are folded back.
11. The top corner of the square rises up along the fold line. The other two folds fold inwards.
12. The upper edges of the sheet are folded inward. You need to straighten them out.
13. The outer edges of the resulting diamond are folded in the center. The right fold folds towards the left.

At the last stage, the figure is flipped, and the top corner of the bottom layer is folded to the top corner.

Gallery: modular origami (25 photos)

Modular origami for beginners: swan (video)

Herringbone using modular origami: step by step instructions

Such a three-dimensional creation, like a paper Christmas tree, can decorate pictures, stands or wooden decorative boards.

So, detailed technique:

1. The Christmas tree should be made of green paper. You can use both colored and plain paper. If the choice fell on the usual one, then you should use paints so that the material acquires a green tint.
2. Collect the Christmas tree should be from a square sheet. Fold lines are made in height, width and diagonals. The paper unfolds.
3. Then the basic model of the figure is formed - a triangle. A fold line is outlined in the figure. The right side turns towards her.
4. Next, use the fold line so that the right corner of the figure is centered on the base of the triangle.
5. All corners are wrapped.
6. Then you need to use scissors so that the Christmas tree then becomes voluminous. Three cuts should be made on the right and on the left side.

Such a three-dimensional creation, like a paper Christmas tree, can decorate pictures, stands or wooden decorative boards.

At the last stage, the resulting segments are bent to the sides.

Small human figurine: a simple description and diagram

For each detail of the little man, you can use paper of different colors, for example, make the top yellow and the pants blue. But to simplify the task, it is better to use a single-color material. A pencil is not needed to create a little man.

1. So, the square material is bent in half, then the side corners of the figure are bent.
2. A zipper fold should be made at the bottom of the sheet. The corner drops at the top. Then the figure is flipped.
3. The corner is slightly bent. You do not need to bend it too much, just slightly outline the fold line.
4. After that, you need to carefully flatten the "pockets" of the resulting figure, bending the resulting triangle.
5. One half of the product is bent back.
6. The corner is pulled up, part of the paper is pulled out. An elongated figure is an almost finished little man.
7. After pulling the shape up, only the "nose" of the triangle should remain visible.
8. The corner bends inward, and the man's head rises up.
9. The remaining upper corners are bent inward on each side.

For each detail of the little man, you can use paper of different colors.

At the end, the arms and head of the little man should be glued to the body.

Tips for those who are engaged in modular origami

• By connecting several origami with a thread, you can decorate a room with this. Lots of ideas! For example, you can hang crafts on a nail by the door. It looks very nice, especially if the origami is multi-colored.
• A beginner who wants to improve his skill can experiment with different materials and colors.
• Thread origami through the thread must be very careful not to damage the paper.
• In such work, it is recommended to use thin paper designed specifically for modular origami. Why? It is thinner and easier to work with. Although people who fold paper very intensively can tear it, but if everything is done carefully, then the craft turns out to be very beautiful.
• Origami is a great gift. By the new year, you can make a Christmas tree, and by February 23 - a tank.
• There is an alternative material for creating modular origami - this is foil. From it, crafts are more durable, besides, they are shiny.
• In order to follow an environmental plan for preserving the environment, you can use not new, but recycled paper.
• If a person plans to donate origami, then the last step of its completion is recommended not to be done in advance, but before delivery. So the craft will not look "rumpled".

By connecting several origami with a thread, you can decorate a room with this

To create a beautiful craft, the main thing is to make smooth edges. That is why it is not recommended to use poor quality material. If the sheet is torn, then elegant origami will not work.

How to make modular origami in the shape of a heart?

1. Take a sheet of square paper. The colored side is turned upside down. The top left corner folds towards the center. The edges should be evenly attached to each other.
2. The action is repeated with a different angle. As a result, the material should have several fold lines. There is no need to unfold the leaf after this.
3. The bottom of the material is folded towards the center.
4. Then the leaf is completely straightened and turned over to the other side. If before that everything was done correctly, then a bulge should form in the center of the sheet.
5. Next is a horizontal fold.
6. The sheet is turned over again.
7. The two edges of the paper are folded towards the center. The edges of the shape should touch.

Such a gift is very romantic.

What do you need to prepare for work?

• Paper. For modular origami, specific thin paper is sold. But if this was not found, then you can use the usual material. The main thing is that it should be square.
• Flat surface. It is convenient to work on a flat surface on which the paper will lie flat.
• Ruler. A ruler is used to give the folds an even look. However, it is not necessary to use it.

Paper strawberries for beginners (video)

If you follow the instructions correctly, you can make the most beautiful modular origami with your own hands. The main thing is to have a desire, and then it will be possible to create even the most complex paper products.

Origami is the art of folding all kinds of crafts using paper. In most cases, the lesson does not involve the use of glue and scissors. This direction arose in 610, when the secret of making paper came to Japan from China. The monks learned how to fold figurines that decorated temples and were used in rituals. In the Middle Ages, this arts and crafts became an element of the culture of Japanese aristocrats. If you want to master this hobby, the article contains interesting origami paper patterns.

Origami for beginners

This skill resembles a trick - a beautiful figure is born from a simple leaf in a few minutes. The lesson does not require large material costs, it is absolutely safe even for small children. Origami allows you to create a whole world without special abilities. This hobby develops beginners' spatial imagination, fine motor skills, motor and spatial memory, concentration, communication and gaming abilities, horizons, and creative skills. The paper patterns below will help you make original, unusual toys, gifts, figurines.

What materials will be required

Before you start doing origami, you should stock up on the necessary set of tools. First, you should choose paper, preferably office paper, because it is not too smooth and its density is enough for folding according to patterns. To attach small parts, gluing, you will need an adhesive stick or PVA glue, and an aerosol glue is needed if you need to glue two multi-colored sheets of paper. The last technique allows you to create interesting crafts by combining textures and colors.

You can use a more convenient adhesive mass, with which any part is easily attached inside or outside the craft, and then removed if necessary, without leaving marks. If the craft is made of white paper, then after it is covered with spray paint. Sometimes several pairs of sharp scissors with blades of different shapes and lengths are required. In some cases, it is possible to replace them with a cutter. This tool is necessary when trimming, cutting straight lines. The blade must be sharpened for a smooth, clean cut.

Triangles, rulers, protractors are needed for marking according to the scheme when folding the figures, cutting out the base, observing a certain assembly angle, symmetrical placement of the composition based on the panel. You will need a mechanical pencil with a replaceable thin lead. In addition, needlewomen use ready-made eyes for toys, leftover yarn, ribbons, fabric, beads, beads, sequins for decoration, thread with a needle to connect individual parts.

Paper selection

The result of the work depends on the correct choice of paper, since the whole process of creating origami according to the schemes consists in folding, bending. The list below will help you decide which material is better and which is worse for this type of needlework:

• Office white paper is thick, not too smooth, so the modules hold well when connected. It is better to start doing origami with such material, since it is a pity to throw away a damaged model. Its disadvantage lies in the fact that moss appears at the place of the fold.
• Colored office paper - does not turn white on the folds, differs in density, is used in modular origami.
• Stickers, note paper - can be dyed in different colors, used to create kusudama, in modular origami.
• School colored paper is thin, loose, easily torn, not suitable for this hobby. On the folds it is erased, white stripes appear.
• Foil paper - durable, does not tear, is used when creating complex patterns, twisted models, modules. When straightened, the folds remain dense stripes.
• The pages of glossy magazines are dense, fold well, and hold their shape.
• Banknotes are durable, do not wear out on the folds, suitable for small modules, making gifts.
• Special paper for origami - sold in sets, with a variety of patterns, can be double-sided, monotonous.
• Rice, papyrus, craft, parchment, cigarette, mulberry, silk and other expensive types of paper - each type has its advantages and disadvantages, allowing you to create interesting crafts according to patterns.
• Drawing graph paper, tracing paper - suitable for the first attempts at creating complex works.

Types of origami in pictures

Origami is a great opportunity to occupy yourself with something interesting, useful, have fun, developing new skills and abilities. In addition to the classical direction, there are many other alternative techniques:

How to learn to make animals - schemes for children

Children's pranks, the inability to sit in one place is often due to the fact that the baby has nothing to do, and the energy needs to be directed in some direction. Invite boys and girls to do origami, which will calm them down, captivate them, make them feel like little wizards who work wonders. This is a useful hobby that develops attention, patience, artistic taste, and thinking. Learning how to make origami animals is simple: take a piece of paper, fold it according to the diagram below and get a funny little animal.

How to make a box with a lid

An origami box is an irreplaceable thing that is useful for a gift. You can roll it up in minutes. No glue or scissors are required to create, just a couple of pieces of paper. For the box, it is better to choose colored beautiful paper. When working, remember that the lid must be larger than the base. From above, you can decorate the box for the occasion: ribbons with New Year's prints, buttons, and other decor items. Step-by-step instruction:

• We draw a sheet from one corner to the opposite diagonally.
• We bend one corner to the center.

​

• Let's do the same with the rest of the corners.
• We bend back two corners, fold the remaining ones flush with the center line in half, as in the photo.

• Do the same with the other two corners. The result is a blank, as in the photo.
• We make cuts.

• We bend two corners to the center.

• Next, fold, as in the photo.

• This is the bottom of the box. In the same sequence, we make the cap 5 mm larger on each side.

Beautiful flowers - paper rose

An origami rose is a popular craft in this technique. It is made quickly and easily from one square sheet of paper, painted red on both sides. Step by step instructions:

• Fold the sheet in half.
• Fold in half again.

• We open, flatten the top layer.
• We turn the workpiece over, turn over the square.
• We repeat the third step.

• Bend two corners to the top.
• We bend the triangles in half, outlining the lines.

• We open, flatten the triangles by pulling down the corners.
• We bend the upper parts of the resulting pockets down.

• With the second side, repeat steps 6-9.
• We make a fold by bending the top corner.

• We open the lower part of the blank like a book.
• We take the places indicated in the picture, pull, flatten to get two triangles on the side.

• We turn over the workpiece.

• Raise the triangle.

• Bend the lower right square from top to bottom diagonally.

• We turn the product 180 degrees. We repeat the previous step.

• I put the blank on the left palm. With the fingers of the right hand, we take the walls of the craft, twist clockwise until we get a rose. We twist the petals beautifully with a pencil or a thin stick.

Modular 3D white paper origami - swan

Modular origami allows you to create very beautiful, voluminous crafts. This master class shows you step by step how to assemble a beautiful swan. Such a product can become a decoration of your home. Instruction step by step:

• According to the scheme, we make 458 white triangular modules. One orange or red for the beak.
• We take three modules, insert the corners of two into the pockets of the third.

• Let's add two more.
• In the same way, we add two modules.

• We arrange the structure as shown in the photo.
• We insert the corners into the pockets.

• We collect three rows in this way, each of which consists of 30 modules. We close in a circle.
• Similarly, we put on the modules of the fourth and fifth row.

• We take the workpiece, gently press the center with our thumbs, turning the product inside out.

• The edges are folded up.

• We put on the sixth row, placing the modules in a checkerboard pattern.
• In the seventh layer we make wings: we put on 12 modules, skip two corners, attach 12 more. There will be a neck on the missed narrow section, and a tail on the remaining wide one.

• In the next row, we reduce the wing by one module.
• Similarly, we reduce each row until one triangle remains.

• We make the tail according to the principle of decreasing by one module in each new layer.
• We make the neck and head 10 white and 1 red module, on which you need to glue the corners so that the beak is not forked. The neck is assembled like this: we insert the corners of one into the pockets of another module.

• So we collect the rest, arching the neck.
• We put the neck in the right place.

What else can be made from paper: assembly diagrams

All kinds of origami techniques make it possible to make many interesting crafts. This is an ideal pastime for a child in the form of a game. Such arts and crafts does not stand still: it gradually gained experience, transformed, as a result of which many schemes for assembling various figures of snowflakes, cars, airplanes, furniture, animals, etc. arose.

Fighter aircraft

Many in childhood folded airplanes from leaves torn from a school notebook and launched them at a break, watching the flight. In the origami technique, there are a lot of options and forms of this craft, from the simplest to the most complex models. The diagrams below demonstrate the assembly of fighters, which will require a little patience and paper.

cars

The next popular paper craft is considered a typewriter. Every boy loved to play with them in childhood. If you do not know how to make it, the following easy diagrams of racing and ordinary cars, trucks, police cars below will help you. If you follow the instructions, the assembly of the model will not take much time, and the result will be excellent.

minecraft

Minecraft is a sandbox construction game. It allows players to create, destroy various blocks, use objects in the surrounding three-dimensional environment. If you are familiar with the Minecraft game, you will be interested in creating its blocks and heroes using the origami schemes below. You can use white paper and draw the desired image on it, or print templates.

Furniture

It is very exciting to make origami furniture according to paper patterns. You can create a window, a sofa, a table, a bed, a desk, an armchair. Such crafts are suitable for future children's games, creating a dollhouse, applications. You can choose any paper, different shades. By creating several figurines, you will get a whole set of miniature furniture. All schemes are easy, so even a child can do crafts.

Snowflake

Origami and kirigami paper snowflakes are a great way to decorate your own home for the New Year holidays. You can hang such crafts near windows, on a Christmas tree, a chandelier, make a garland out of them and hang them along the walls, a children's mobile. Each scheme allows you to create a unique, inimitable snowflake. You can paint the finished products with silver, blue glitter paint from a spray can, or apply glue with glitter around the edges to make the decoration even more interesting.

Many have been familiar with the art of origami since childhood, when we were taught to make light fakes out of paper. This word comes from Japanese and means "folded paper". This is an ancient Japanese art of creating all kinds of paper shapes without the use of scissors or paper. Today we will tell about modular origami, figure assembly schemes will be useful for beginners.

The origami technique has a relaxing and concentrating effect, and for children it is a great way to develop finger motor skills. There are currently about 10 subspecies of this skill, and all of them are unique.

Introduction to modular technology

To date, the most popular technique is modular origami. For many people, this is a new term and, at first glance, it is very difficult to guess what it is. But the figures created using this technique literally fascinate and amaze with their beauty. Here are some examples:

Today on the Internet you can find various origami schemes from modules in Russian. Many of them contain video tutorials. The level of proficiency in this art can be improved through ordinary practice. Perhaps in the future you yourself will be able to create schemes for your author's figurines of animals or flowers, or maybe something more complicated.

Volumetric origami from modules, the schemes of which are quite detailed, will not cause you great difficulties. And this process will certainly become your hobby. Created by yourself, unique and bewitching figurines will find their application in the interior of the house or serve as an excellent gift for friends or colleagues.

I advise you to start your acquaintance with modular origami by making the main element - a modular triangle. Simple, at first glance, triangles require special attention, because they are the basis for all modular-type figures.

First of all, carefully study the scheme for creating a model element:

To perform the basic module, it is better to use paper that holds the shape.

When finished, it looks like this:

Simple origami schemes from modules

Now that the main points of this technique have been studied, I suggest you try your hand and fold a simple model of a modular origami heart according to a detailed video tutorial:

I also picked up some easy-to-execute schemes that even a beginner origamist can handle:

For example, a detailed diagram for assembling a Christmas tree from modules:

paper strawberries

Some figures are made so realistic! How do you like such an appetizing strawberry? Doesn't it make you want to eat it?

To complete it, we need only 59 triangular modules in red and green. By the way, pay special attention to the quality of the paper and its color, then the finished figure will look as bright and accurate as possible.

So, following the step-by-step instructions, we begin the assembly of the berry. The first three rows should consist of 13 modules

We close the workpiece in a ring:

Turning out the shape:

We add another row of 13 models, and after it we add 7 more modules for the last row of berries:

Add 7 green corners to the corners of the first row:

Our strawberry is ready:

See the video for more details:

Photo frame and simple valentine

In modular origami, in addition to multi-level figures, you can make flat models. For example, a frame for a photo or a valentine-heart. To do this, triangular modules are inserted into each other in a row.

Due to the peculiarity of the connection, in the future the figure can be given the desired shape.

Having made several such circles, we glue them together and get an original and easy-to-make photo frame:

When adding the heart in this way, we need to prepare two identical blanks:

They will be connected to each other with the help of two triangles, which must first be deployed. Like this:

And the lower ends of the heart must be lubricated with transparent glue and connected:

Try your hand at a new art for yourself, perhaps it will become your favorite kind of creativity and a way to relax after a hard day's work.

Christmas tree:

Soaring Eagle:

Parrot Macaw:

Children always demand attention. When choosing activities for children, many are interested in creativity and are looking for interesting ideas, including modular paper origami schemes for beginners. In social networks, finding a master class in the origami technique is not a problem. Experienced craftsmen explain in detail how to create a triangular module and design schemes for various crafts.

Step by step instructions for modular origami for beginners contains a method for manufacturing a triangular-shaped module and diagrams of three-dimensional figures using the origami technique.

Folding three-dimensional figures from identical paper parts is called modular origami. This activity is very time-consuming, but at the same time exciting. Being engaged in the technique of modular origami, children develop not only fine motor skills of their hands, but also mental, creative abilities.

First learn how to fold the module. Take sheets of A4 paper and fold in half until you get 16 rectangles. Cut the sheets along the lines obtained into 16 parts.

For the manufacture of crafts, schemes are used that contain information about how many modules need to be made and what color they should be.

Mounting methods

The module has 2 corners along the edges and 2 pockets on the fold line. These parts of the triangle are involved in attaching the modules to each other. Triangles are placed in two ways - on long or short sides . Binding options:

1. Take three elements. Two elements are placed next to each other with long sides and 2 corners are inserted into the pockets of the third element, which is on the short sides.
2. Two elements stand on long sides, insert 2 corners of one triangle into the pockets of the second.
3. Two triangles stand on the short sides, one triangle is inserted with corners into the pockets of the other triangle.

white paper fantasies

Modular origami for beginners made of white paper looks very impressive. It is used to make a bunny, a dog, an owl, a rose, a camomile, a dove, a white swan.

White Rose

Take a sheet and fold it into 32 parts. Blanks are folded from small rectangles, a total of 110 white blanks.

The first 3 rows are made up of 18 blanks. In the 1st row and in the 3rd row, the modules are placed with the short sides up, the 2nd row - with the long side up.

Take 8 modules, insert the short side down. The top of the modules is pressed against each other, and the rosebud is ready. The cocktail tube is glued with green paper and glued to the rosebud.

The first crafts from the modules

Small origami figures from modules are not inferior to large structures, they are also beautiful and interesting. Beginners easily collect a Christmas tree, lemon, strawberry, flower, watermelon peel, small swans.

Step-by-step instructions for constructing a Christmas tree:

To make a small lemon, you need to make 96 dark yellow, 16 white, 16 yellow modules. Each row of a modular lemon consists of 16 blanks, which are placed with the short side up. The bottom of the lemon consists of three rows of modules. Yellow blanks are placed in the first row, white in the second row and dark yellow in the third row. After that, 5 more rows of dark yellow modules are made. The lemon is ready.

Flower for beginners

Master class for beginners: a simple daisy flower.

The masters offer beginners step-by-step instructions on how to make a modular paper origami swan. You can make a small white swan, a large swan and the Swan Princess.

Diagram of a small figure

To make a baby swan, requires 22 dark yellow triangles, 120 white and 1 red triangle. The first circle and all subsequent circles of the small swan figurine are made up of 15 blanks.

The body of the swan is made up of 3 rows of elements, then the product is connected and raised with the corners of the triangles up, 4. 5, 6, 7 rows of blanks are inserted from top to bottom. After finishing the 7th row, they begin to fold the wings. The wing is assembled anywhere in the workpiece of 6 elements.

The wing begins to be made from 1 dark yellow element, 4 white, again 1 dark yellow. In the future, each row of the wing is reduced by one white element, while the dark yellow modules remain at the end of each row. The work is completed when only 1 dark yellow module remains. The second wing is made in the same way. The neck is folded, putting on a triangle in a triangle 15 white pieces and at the end 1 red beak. The finished strip is inserted between the red modules. Usually they put together a whole family of small swans.

Great white swan

A white large swan is made up of 355 white modules and 1 red one. When working on a craft, make sure that the direction of the modules matches.

The body of the swan begins to build according to the scheme:

To make the Swan Princess, you must definitely follow the step-by-step instructions and the assembly diagram.

For the construction of three-dimensional figures it is necessary to have diligence and perseverance. DIY crafts are the most valuable and expensive! It is the best gift for family and friends!

Attention, only TODAY!