Hats crochet knitting patterns new items. Crochet knitted hats for women: a variety of shapes and designs. Positive women's hat with pompom-spirals

Dear accomplices! This is not cheating. These hats are really crocheted, not knitted. And this online was created in order to introduce you to the technique of knitting such hats.

https://img-fotki.yandex.ru/get/15541/124053456.26/0_11c80d_b43d6b9a_orig.jpg

UPD 08/24/2016 New video

The first few rows are the most difficult, then knitting is easier.

https://img-fotki.yandex.ru/get/6604/124053456.b/0_82837_981c628c_orig.jpg

Be careful.
Stick the hook exactly into the back / far loop of the loop, otherwise the pattern will turn out different, not a 1x1 elastic band.
Periodically count the number of loops in the row so as not to lose columns and not add extra ones.
Try to knit all loops and columns evenly, especially along the edges, so that there are no tightened sections or sagging threads in the fabric.
Keep track of which way you turn the knitting when moving from row to row, the appearance of the edge depends on it.

Since the connecting column is the lowest of all columns in height, the increment of the fabric is slower than with ordinary knitting. In addition, the habit of knitting a connecting column in two steps slows down the speed. To increase the speed, you need to choose the optimal position of the hands and learn how to knit a connecting column in one go. About setting hands when crocheting here You can also find recommendations for left-handed knitters on the link.

Partial knitting
Hats are knitted across with sectors / wedges. The crown is formed according to the principle of partial knitting, i.e. knitting in short rows.

The first way of partial knitting

https://img-fotki.yandex.ru/get/6408/124053456.b/0_8351c_edbdf8c7_orig.jpg

The formation of a "ladder" of the first sector and knitting the initial row of the next sector.
1 - the first sector is connected, it turned out a "ladder"
2 - start knitting the first row of the next sector
3, 4, 5 - we sequentially knit the cloves, here we need to work very carefully to knit as many loops as in the first row of the sector
6 - the first row of the second sector is knitted
7, 8, 9 - we turn the work and knit the next row of the second sector, then we knit in the same way as the first sector was knitted, according to the same pattern, to get exactly the same "ladder"
10 - again we do not finish the row to the end in order to get the first step of the "ladder" of the second sector
11 - all steps of the second sector are knitted
12 - repeating steps 2-6, close the steps of the second sector and get the first row of the third sector

The second way of partial knitting

https://img-fotki.yandex.ru/get/4509/124053456.2a/0_13e816_779b45c1_orig.jpg

Recommendations for choosing yarn and selecting a hook.
Yarn is selected depending on the season. For winter and autumn/spring, wool, acrylic or mixed fiber yarns are suitable.

https://img-fotki.yandex.ru/get/6709/124053456.2a/0_13e819_e195d3aa_orig.jpg
In the photo from left to right
YarnArt Wool (80% wool 30% polyamide, 100g 340m) hook 2.5mm
Alize Baby Wool (40% wool 40% acrylic 20% bamboo, 50g 175m) 3mm hook
YarnArt Crazy Color (35% wool 65% acrylic, 100g 260m) 3.5mm hook

https://img-fotki.yandex.ru/get/4133/124053456.2a/0_13e614_c2885ea7_XL.jpg
And this is a sample of double thread Alize Baby Wool Batik Design (40% wool 40% acrylic 20% bamboo, 50g 175m) hook 4mm

In addition, you will need scissors, a tapestry needle (with a blunt end), a centimeter tape. You can also use knitting markers, a notebook, a pen, a pencil for calculations.

https://img-fotki.yandex.ru/get/6509/124053456.2a/0_13e815_aa7440e0_orig.jpg

Sample and calculation
For the calculation, you need a measure of "head circumference". The height of the hat is dictated by the style. For head-hugging hats, you can use the table data in the calculation

https://img-fotki.yandex.ru/get/5820/124053456.2a/0_13e826_6c2cec9f_L.jpg
Table from here

We knit a sample to determine the density of knitting. It is advisable to wash it in accordance with the recommendations on the label, then dry without stretching. Then, on a slightly stretched sample, we count the number of loops / columns horizontally, and the number of scars vertically (1 scar = 2 rows).

We do the calculation. The direction of knitting hats - around the circumference of the head. For example, horizontally 5cm = 17 loops, which means for a hat height of 22cm the chain will be 75 loops, and vertically 5cm = 10 scars, which means 55cm (head circumference) will be 110 scars. Since the hat is knitted in sectors / wedges, it is necessary to distribute the resulting number of scars by sectors. I picked up the ratio of 11 sectors of 10 scars = 110 scars.

Errors in determining the number of sectors.
The number of sectors can be reduced or increased. The more sectors, the easier it is to correct knitting if an error crept into the preliminary calculations. It will be enough to knit or dissolve one or two sectors so that the hat fits the circumference of the head.

https://img-fotki.yandex.ru/get/9748/124053456.2a/0_13e817_44021f4e_orig.jpg

Errors in determining the length of the typesetting chain
At first, especially when working with unfamiliar yarn, errors occur in determining the length of the typesetting chain. If the stacking chain is short, the cap height is insufficient. If the dial chain is long, the height, on the contrary, turns out to be excessive. What to do in such cases? If you do not want to bandage the hat, in case of insufficient height, you can tie a strip of the required width from below

https://img-fotki.yandex.ru/get/6414/124053456.2a/0_13e818_60c7627b_orig.jpg
In case of excess height, you can unscrew the excess outward or tuck it on the wrong side. If such options are not suitable, you will have to dissolve the hat and bandage it.

Making a seam

https://img-fotki.yandex.ru/get/5504/124053456.8/0_632c8_a620eeae_L.jpg

Just a hat
Suitable for children and adults. Well fits the head and covers the ears.

https://img-fotki.yandex.ru/get/6400/124053456.2a/0_13e82d_6da3ebf7_orig.jpg
Hat height approx 20-22cm

https://img-fotki.yandex.ru/get/3211/124053456.2a/0_13e81a_108b53c_L.jpg
Alize Superwash (75% wool 25% polyamide, 50g 210m or 100g 420m) or YarnArt Wool (80% wool 30% polyamide, 100g 340m)
Hooks 2.5 or 3mm.

https://img-fotki.yandex.ru/get/4614/124053456.2a/0_13e33f_232a9b39_L.jpg

Video of the hat knitting process (no sound, all explanations are in the credits).

We collect a chain of 75 air. loops + 1 air. lifting loop and knit the “ladder” of the first wedge with partial knitting in the first way according to the algorithm
1 scar - leave 1 loop untied
2-7 scars - leave untied 2 loops each
8 hem - leave 4 loops untied
9 scar - leave untied 5 loops
10 hem - leave 6 loops untied
In total, 11 such wedges / sectors must be connected.
At the end of knitting, carefully pull off the loops at the crown, sew the edges and tuck the tails into the fabric.

The yarn consumption is about 2/3 of a 100g skein.

https://img-fotki.yandex.ru/get/3110/124053456.2a/0_13e81b_e533266_XXL.jpg
To knit from another yarn, you need to make your own calculation.

Header Examples
By the same principle, you can knit a variety of hats.

Classic Stocking Cap design Nancy Nehring

For a lapel, it is necessary to increase the number of loops of the typesetting chain. You can choose a different pattern for the lapel.

Rib Stitch Cap design Nancy Nehring

Corkscrew Tassel Cap design Nancy Nehring

Spiral scheme

https://img-fotki.yandex.ru/get/4607/124053456.2a/0_13e81d_f41a820f_orig.jpg

Ear-covering hats
These hats differ from simple ones only in the figured bottom, the presence of ears. The technique of knitting with connecting columns allows you to create a curly edge.

https://img-fotki.yandex.ru/get/4605/124053456.2a/0_13e81e_5818fd43_orig.jpg

To form the bottom line of our knitted hats with ears, you can use the patterns for sewing fleece hats.
For example, this is how a pattern for sewing a hat looks like

Source blog http://igoletti-and-strocilli.blogspot.com/2012/12/blog-post_24.html
The author compiled it using a free pattern from Ottobre magazine. Download patterns for sizes 50-52-54-56 cm here
http://www.ottobredesign.com/fi/kaavat/pdf/nallelakki_fi.pdf

Scarves will complement the hats.

The process of knitting a hat with a lapel
Modeled after Rib Stitch Cap design by Nancy Nehring

No description. I knit according to the picture.
YarnArt Crazy Color yarn (35% wool, 65% acrylic, 100g 260m). Hook 3.5mm.
I knitted a sample and determined the density, approximately 5 cm - 13 loops. Stacked chain 78 ch (10 loops - decoration of the crown, 50 loops - hat, 18 loops - lapel) + 1 ch lift. The number of sectors was not previously considered. I will knit and try on.
In this hat, I decided to do partial knitting in the 2nd way https://img-fotki.yandex.ru/get/4509/124053456.2a/0_13e816_779b45c1_orig.jpg
The sector is five scars, but the reductions fit only in four scars. The last, 5th scar is knitted completely without reductions (i.e., the entire row to the end), this will be the decoration of the crown.

Stacked chain 78 ch + 1 ch lift. Markers marked 10th, 15th, 20th, 25th loops

So that there are no holes in the canvas on the mating line of the wedges, it is necessary to insert the hook into the loop of the step and the back wall of the loop of the previous row and knit them together.

We knit three steps of the ladder by picking up the loops, and we knit the last 4th step on the contrary, without picking up the loop. The holes that have turned out there will be useful to us in order to tightly pull off the decoration of the crown.

The wedge is tied. In the last row of the wedge, there should be 78 loops as in the typesetting chain. You can remove the markers and mark the 10th, 15th, 20th, 25th loops again.

The remaining wedges knit in the same way as the first.

Knit as many wedges as you need so that the hat fits the circumference of the head.

UPD-2 07.10.2015

There are 18 wedges in this hat.

Making a seam

A correctly made seam can only be identified by a small scar on one side. When the hat is on the head and the elastic is stretched out, this scar is very difficult to see.

Ready-made hat as in the original with a collar...

But you can wear it like a beanie.

I wish everyone to impose more hats, good and different!
Light loops to us!

Hat photos can be added to Album for finished works

A knitted hat has long been a fashion accessory. A perky pom-pom or other decorative elements make it not only functional, but also a very beautiful piece of clothing. Cool hats cheer up and fit perfectly into any color scheme. They fit both a leather jacket and an elegant coat, you just need to master the crochet hat and learn a few simple patterns.

How to crochet hats

Crochet baby hats for boys and girls

You have probably seen children walking around in bright funny hats. Funny ears and faces of animals can be crocheted. First you need to take measurements, as shown in the diagram.

Basic knitting pattern for a baby hat

You will need:

80-100 grams of acrylic yarn (30 g pink and 60 g gray);

some white and black yarn for decoration;
hook number 4.

Operating procedure:

start knitting with gray (pink) threads, starting from the crown;
form a ring and tie it with a half-column to form a circle;
continue to work and form the bottom of the cap in this way;
when the bottom is ready, continue knitting with gray threads, but no longer add loops to form a circle;

knit half of the cap and switch to pink (gray) threads;
continue to work to full size and fasten the thread from the wrong side;
mark a place for long ears, fasten the pink thread and knit with a simple half-column 4-5 cm;
continue knitting the fabric until the length of the ear is sufficient (the order of knitting according to the scheme can be changed if you want more length of the ears);
tie a symmetrical ear on the other side;
follow the scheme of the upper round ears and the nose of the mouse;
sew all the details to the hat.

Funny hares or teddy bears will decorate a hat for the little ones.

You can crochet other cute and practical things by mastering "crocheting for children".

Crocheted warm hats for women with patterns

Classic berets never go out of style. They are refined and elegant and are loved by women of all ages.

For a beret you will need:

mohair with a small inclusion of synthetic fibers - 90 g;
hook number 4.

The order of work according to the scheme:

knit a chain of 8 loops and close it in a circle;
start circular knitting with a regular column so that you get a round beret bottom;
keep adding loops until you reach the desired diameter;
knit several rows without adding loops - this is how you arrange the transition and the desired crease line in the beret;
continue knitting with decreasing loops in the same pattern until you reach the desired head diameter;
knit a circle loop into a loop, but wind the hook not into the front, but into the wrong side of the loop - this will be the transition to the elastic band that holds the beret on the head;
knit the required number of rows loop in loop until the width of the rim is 3-4 cm;
finish knitting by fastening the thread and pull the working thread inside the beret.

Look at other schemes for warm berets.

Crocheted slippers will help you warm up not only on the street, but also at home.

Winter women's hat, crocheted with lush columns

A voluminous hat is appropriate on cold days. Cozy and elegant hats knitted with a fluffy column will suit any style of winter clothing. They keep their shape perfectly and are a stylish accessory that you can make yourself.

Yarn for this style should keep the volume well, not wrinkle and not lose the pile. Otherwise, after a few days of wearing, the product will lose its appearance.

You will need:

yarn - 150-250 g (depending on whether you will make the pompom yourself);
hook number 4.

To get started, consider the nuances of the work:

the hat is knitted from the bottom up;
the multiplicity of loops for the pattern should be equal to 5;
work is carried out not only in a circle, but in different directions: when the circle is completely passed in every second row, make a connecting column and continue the work of the third row in the opposite direction.

Operating procedure:

Many people think that voluminous braids can only be knitted on knitting needles. But the craftswomen prove the opposite and offer many voluminous crochet patterns.

To create three-dimensional patterns, the hook itself is very important. The size should be chosen optimally and in accordance with the thickness of the yarn. Then the patterns will be uniform throughout the thickness, but without gaps. The thickness of the hook should be uniform along the entire length, since when making a pattern, there can be 5-8 loops on the hook at the same time.

The patterns themselves are not that complicated.. It is enough to master with the basic elements and learn the necessary notation on the diagram.

Look at a few patterns made in bulk knit.

But finished products that can be created even from multi-colored yarn remnants.

Such a three-dimensional pattern can be used to knit even the most popular stocking hat or a three-dimensional beret today.

A crochet beanie hat can please you after a few days of work according to a given pattern.

Sometimes even the most beloved warm hat is so annoying that you want to decorate it in any way possible. And one of the fastest and most effective solutions is to crochet flowers and attach them to a hat.

There is another benefit to this method as well. Let's say you're learning "crochet patterns" and you're just practicing to get your hands full. So, the result of training can be visible results in the form of flowers. Or, for example, you decided to knit a beautiful snood, but there are no longer enough threads for a hat. A few flowers on the hat will decorate and unite the set together.

Individual flowers can be made according to different schemes, and then they can be arranged into compositions.

Hats for beloved men are so severe that they fit, of course, without openwork patterns and the slightest hint of ornament. Simple patterns and clear lines are only used to knit a simple hat for warmth. Look at some simple patterns with which you can knit warm hats for your men.

Using basic patterns and interesting color combinations, you can knit hats for even the most brutal men.

Video with master class lessons

The author of the video tells what simple crochet techniques make up a women's knitted beanie hat. A detailed pattern and alternation of columns and chains will even help to create an elastic band along the edge of the cap, which is very difficult to do with a hook.

Lush columns are the basis for fashionable women's hats. A video with a crochet lesson is useful for women who prefer hand-made hats to all purchased hats.

The voluminous hat looks like it is knitted from fashionable and very expensive today alpaca or merino yarn. But no, only stitches and crochets, combined with skill, will help you knit a beautiful two-tone hat for a girl.

A children's hat should not only be warm and beautiful, but also cover the child's ears well. A detailed master class on knitting a perky hat for a girl with a description of the decor elements and an analysis of the pattern. And from the leftover yarn, you can learn to crochet toys for your kids.

Hello, today's topic is this is KNITTING HAT… I will show you the most beautiful models of women's hats for the winter of 2016-2017 and tell you exactly how they are connected ... In this article I will reveal to you the general principle of knitting women's hats and berets(both crochet and knitting). You can already about one photo to understand exactly how this hat is connected... and LEARN without diagrams and descriptions to figure out for yourself what and in what sequence you need to do in order to eventually knit just such a winter hat as in the photo.

Today we will knit...

hats-caps on knitting needles (elongated and on the head)
beret hats on knitting needles and crochet (fluffy and not so)
women's turban hats (I will show one simple way on knitting needles)
knitted hats with fields and visors (I will tell you in detail how to make fields)
winter hats with elegant soft lapels
and dried wool caps designed like an English lady.

So, let's start knitting our autumn and winter hats.

Let's start with the simplest ones... and move on as the task becomes more complex.

Women's hats SIMPLE KNIT spokes ...

(cut CAP)

The fastest knitting hat is when you just chose one simple pattern(gum, English gum, knit-rice) ... And drive almost the entire (or even all) part of the canvas in one pattern. Starting from the crown - in each row we begin to decrease the loops, and when 15-20 loops remain on the knitting needles - we pull the thread through them - and simply pull them into one bunch-point at the back of the head. According to this principle, the cap is knitted in the photo below - (25 rows of knitting of the "rice" pattern ... and 15 rows of purl loops with decrease).

And in the same knitting with the “rice” pattern, it would be nice to knit a cozy scarf-snood (collar).

In such a RUNNING PATTERN (of the same type) can be connected as dense winter hat (covered over the head) ... So loose spacious knitted hat pattern. You can decorate a women's hat with one or two fur pompoms.

Can be knitted HAT-CAP - as in the photo below . She looks best when it has a fairly wide (16-20 rows) gum. With a narrow elastic band, such a hat is not suitable for anyone ... as it visually cuts off the skull. A wide elastic band, on the contrary, visually stretches the oval of the face ... opens the forehead and gives volume.

To knit any hat pattern exact knitting pattern in principle, it is not needed ... Since all the hats in the world are knitted according to the general principle. Below I give a general knitting pattern for hats-caps... And a little lower I will give a knitting pattern for all berets.

GENERAL KNITTING SCHEME

for any caps.

Such hats-caps can be knitted according to a simple WITHOUT A PATTERN ... or according to a RELIEF or OPENWORK pattern. Choose any knitting pattern on any site ... and go.

Step 1 - START KNITTING

First and we knit an elastic band (in 12-15 rows) and further ( without adding loops on the knitting needles) we knit an already patterned fabric of a hat. We get a model similar to the photo of the purple hat is above.

Or after knitting the elastic we can add stitches on the needles... and our canvas will begin to expand ... and we will get a model of a cap that is lush in volume (as on the pink model from the photo above ).

An important rule for adding loops.

When adding loops when knitting a hat with a pattern only one thing matters - the total number of loops on the knitting needles should be DIVIDED BY THE REPORT of the pattern (by the number of loops that are repeated in the pattern pattern) ...

For example, the report (repetition) of our pattern is 8 loops ... which means that the total number of loops on the knitting needles should be divided by 8 ... For example, it should be 160 ... or 168 ... or 176 loops ... (edge-edge loops do not count).

Step 2 - BASIC KNIT.

Further, when the loops are added we begin to knit a pattern ... repeating reports ...
We drive the patterned canvas on rows 40, if you want the usual size of the cap ... (it also depends on the thickness of the threads) Trying on the head ... in the process of knitting, you yourself will understand when it’s enough to drive in a straight line and it’s time to narrow the fabric at the crown. (You can run such a patterned canvas longer so that the hat is higher ... or finish earlier so that the hat wraps around the head, and does not stick out or hang down - everything is up to you)

Step 3 - COMPLETING THE HAT .

Then when our hat approaches the back of the head(or whatever length you want)… we start to close the loops 4 each (or 6 ... or 8 each) in each row - the more you cast off the loops in the row, the faster your knitting will end. Since knitting is completed when 16-20 loops remain on the knitting needles

An important rule of DECREASE loops.

We know that there are fewer stitches on the needles if knit two loops together (as one) ... But in order for the decrease in loops to be UNIFORM - you need to do this decrease in any place ... and in certain sectors of the cap ... (so that these decreasing places are at the same distance from each other). That is, the entire circumference of the cap - we divide it into sectors (as we divide a round cake into equal pieces with a knife) ... sectors usually an even number can be 6 ... or 8 or 10 ...

If you have a hat with a pattern(in which some drawing-report is repeated) - then the drawing itself can be a sector ... Then we make the decrease in a certain (at your choice) place of the pattern- and so in each repetition of the pattern we knit two loops together as one.

Here's what it looks like in the process sector decrease loops when knitting any hat or beret ... (it doesn’t matter if you knit it on two knitting needles or on circular ones).

For example- we have 160 loops on the knitting needles - and we have reached the top of our hat and we need to decrease. We decide to decrease evenly in 10 places of each row ... So we need to divide our hat into 10 sectors.

Then we divide 160 by 10, we get the number 16 ... (that is, we mentally divide the hat into sectors - 16 loops in each sector). And so we continue...

In our first decreasing row we will knit at the end of each 16th loop two loops together(that is, we pick up each 15th and 16th together and knit as one) ...

In the second decreasing row there is one less loop in the sector (and we will already pick up together every 14th + 15th loop in a row) ....

In the third decreasing row- in each sector there are even fewer loops (and we will knit together every 13th and 14th loop).

Everything - now you can complete the knitting.

We collect these remaining loops on a thread... we tighten the thread by collecting all the loops into a bundle and tie it into a knot (we hide the ends of the knot inside). We close the back seam of our hat... and you're done.

LOWERED hat in coarse knit…

If you knit a hat-cap on thick knitting needles and thick threads ... then it’s better to make it SMALL - ON THE HEAD ... and wear it slightly tilted back (that is, without pulling it over your forehead).

The knitting principle is small low hat- exactly the same as that of a high cap-cap ... It’s just that here the FRONT PART of the knitted fabric will not be so long ... that is, we’ll move on to the TOP PART with its loop-reducing rows early.

Knitted hats - WITH EARS.

HAT WITH EARS №1 (dark gray in the photo below) You can KNIT the ears separately and then sew them to the right place of the finished knitted hat.

HAT WITH EARS №2 (light gray in the photo above) - we knit a hat in the form of a pipe - without reducing the loops at the top, and then just close the loops and sew the front and back of the hat together in a straight line. T about there, the top of the pipe was flattened (and this flattened edge was sewn together)

And then the corners of this straight seam we turn into ears. To do this, we make a seam with threads DIAGONALLY cutting off this corner. We make a seam with a thread, pierce through both layers (front and back) and not with a needle, but with an ordinary crochet hook we thread the thread back and forth. Thus, our corner will not be pulled over the head like the whole hat, but stick out like a separate ear. And from the other corner of our flattened and sewn cap pipe we make out the same eye, in the same way.

Or such ears can be conceived on a knitted hat with braids - with a lush embossed pattern. It is easy to knit with your own hands.

Knitted HATS with knitting needles - WITH BRAIDS.

LARGE RELIEF KNIT "BRAID" looks very nice on women's hats

And braids can be placed vertically(as on the ash-pink hat from the photo below).

Or you can make a longitudinal knitting of a hat - not from the forehead to the top of the head, but along the side line (along the girth of the head) - and then our braids will be horizontal left to right - like on the gray hat from the photo below.

KNITTED HATS -

With lapels and FIELDS.

Fashionable hats with fields- reminiscent of elegant hats - so feminine, ideal for an elegant coat with flirty gloves ... Under loose curly hair

Sometimes the fields are knitted SEPARATELY and then sewn to the edge of the finished hat ...

Sometimes, in order to give such fields the necessary rigidity, special blanks of felt fields are cut out ... and inserted inside the fields folded in half (like a bookmark in a book). This is exactly what is done on the knitted hat from the photo below.

Here, try to make the same (as in the photo above) fields on your hat - it's easy to do it yourself ...

Step 1 (preparatory)

First you knit a hat ... Then you cut it out of felt a figure resembling a bagel (a pancake with a hole)... the inner edge of the donut hole should be the same size as the circumference of your head and the edge of the hat.

Step 2 (knitting )

Then on the needles we will knit DIRECT (rectangular fabric gum pattern).

To do this, we collect such a number of loops ... so that the future canvas is equal to the length of the OUTER circumference of a donut made of felt (you can measure it with a centimeter or a school formula) ...

The length of the canvas should be twice as wide as the thickness of the donut - to wrap the donut around it from below and above (since the knitted fields at the cap go both above and below) ... That is, we knit the fabric and from time to time try it on to the width of the cut donut - we wrap the barrel of the donut from the lower and upper sides and see how many more rows are missing ... we knit to the desired length.

Step 3 (stitching )
When the canvas is connected (that is, it has reached a sufficient width for wrapping and sewing a “donut-blank” into it), we are on our canvas close the loops ... remove it from the knitting needle.

We wrap our felt bagel with a knitted cloth ... so so that the fold of the canvas is along the OUTER edge donut ... and the connecting seam of the doubled fabric went along the inner edge of the donut fields was ... (that is, we immediately wrapped and sew the halves of our canvas along the inner edge of the donut)

And then along the edge of the same seam we sew our finished fields to the finished hat. And that's it. You can now crochet a beautiful fluffy flower and add it to the side of your hat.

Another way to make fields on a knitted hat.

And in the fashionable model of a light beige hat (from the photo below) - the fields are formed by themselves when bent in half knitted classic elastic band (one front, one purl). it's easy to do it by hand.

That is, we knit an elastic band for a hat twice as long what the margins should be... and then fold it in half. We stretch the bend slightly with our hands in breadth so that it protrudes with a visor.

Sometimes a fishing line is inserted into such a protruding bend of the elastic- this is done so that the edges of the fields do not wrinkle from wear, but always remain even and elastic.

Sometimes a corset tape is inserted inside the bend - for rigidity(the tape with which the trousers are hemmed below) - and with sewing threads (tone on tone) it is neatly and imperceptibly sewn with through stitches through the edge of the fields.

And here is a hat with WIDE lapels-brims .

Here, the lapel is knitted in the shape of a bell ... which has two sides (inner - light, and outer dark). Now we will make it with our own hands.

Such a hat must be knitted starting from the back of the head... that is, from top to bottom (since it will be convenient to adjust the scope of the fields ... and in which case, it will be convenient to dissolve them and knit again ....

A simple knitting pattern for this WIDE TWO-COLOR BRIM HAT…

Knitting this black hat with white fields - we start from the top ... just knit a straight fabric (or a straight pipe, if on circular knitting needles) ... The fabric of this pipe should be so long that it covers the head from the crown to the forehead.
We turn to white threads - and sharply expanding canvas from the edge of the forehead (adding loops in each row). A shape similar to a bell is formed (we reach the very edge of the fields - trying on in front of a mirror to decide whether such a width of the fields was enough for us). It was we who tied the white side of the fields (the one that is visible in the photo).
We change the threads to black ones and knit the Narrowing in the opposite direction (reducing the same number of loops in each row as we added before). ... this will be the reverse side of the lapel of the fields (dark) which is not visible, hidden-turned away in the photo.
It turns out a design in the form of ... first a narrow black pipe .... then an expanding white part... and then a narrowing black part.
At the widest point of the canvas(where the white turns into black again) we bend the canvas in half (we folded the fields of the cap in half ... And we sew this addition-we fasten it with threads - we fix this double sandwich of fields.
And then only remains sew the top crown seam of the cap - fold it with an envelope as seen in the photo and secure with threads ... and (if we did not knit on circular knitting needles) we make the back seam of the cap.

Note - if you knit such a hat from thick dense threads, then the fields can not be made DOUBLE - without this they will turn out to be dense and upright .

(If suddenly it was unclear explained - write in the comments, I will explain in more detail and even draw ... and maybe even calculate the number of rows and loops in a row).

Knitted hat with brim - crochet.

And here is a MULTI-COLORED hat, which is crocheted. Crochet fields are generally easy to knit. There is no need to be smart here - know, drive the columns in a circle, sharply adding their number in the fields.

And then, at the very edge of the fields (on the last rows), you need to slightly reduce the number of columns so that the cap itself asks for a neat bend upwards.

KNITTED HATS -

WITH SOFT VALVES.

The fields of a knitted hat can be soft and easy to turn away to the hat... then we have an elegant lapel on a knitted cap.

Here in the photo below we see an example of how a ONE-SIDE SIDE lapel is made.
How exactly it is made, I think everyone understands.

knitting first top of the cap... And then we knit the lapel part itself as a separate long canvas on knitting needles (similar to a scarf). There is only one pattern - both from the front and from the wrong side we knit all the time one face loop... we get a ribbed pattern (it is thanks to this ribbed pattern that our fields keep their shape well).

Buttonholes are not required- just sew the edges of the canvas overlapping each other ... and sew on buttons for decoration.

Here is the front opening . The hat is knitted on two needles (without elastic) so that the fabric itself is wrapped up with a beautiful roll up. The pattern looks like RICE...

But the lapel, which is uniform around the entire circumference of the cap. It is decorated with a neat flower.

Hat with cuffs - soft angora.

And here is another fashionable hat - in it we see a non-standard circular knit - and the direction of the knitted fabric goes across - this made it possible to come up with such beautiful lapel fields.

Here the knitting direction is HORIZONTAL (and apparently in the shape of a trapezoid)... which is then sewn into a hat (if suddenly something extra is connected) you can always correct it with scissors (roughly) and close the cut with threads.

To be sure, we can first do Trial mock-up of a hat from a piece of an old sheet(to guess its shape) ... then knit the canvas according to the shape of the layout ... and fold such a hat.

And even better... tie such a hat ONE SIZE BIGGER ... and therefore DECREASE-DOWN it (like a felt boot) in hot water (40 degrees) in a washing machine ... The knitting will immediately become very dense - the hat will become denser and one size smaller.

MORE ABOUT THE RULES OF FELTING I will tell you right now using the example of the following two hats.

HATS KNITTED WITH lapels - dried.

See what fashionable dried hats you can knit on knitting needles ... and dump in the washing machine.

They knit first larger than necessary. Then they are washed in hot water and the wool shrinks. decreases by 30% and the hat becomes plump and warm, as if made of soft felt fabric.

I’ll say in advance that both gray and pink hats are knitted according to the same instructions - this is the same model, it’s just that the manual drapery of the fields (with the help of hat pins) is slightly different.

A detailed description of the dumped hats from the photo above.

(gray and red hat).

Characteristics of the material and product.

200 g of yarn Wash+Filz-it! Fine

(100% wool, 50 g\100 meters No. 00120

circular needles No. 5, stocking needles No. 5
Buckle + pin, brooch, buttons (for finishing hat fields).

Product size before felting: head circumference 70 cm, height 26.5 cm.

Product size after felting: head circumference 54, height 20 cm.

Before starting work- you should knit a sample from the purchased yarn - mark a 10 by 10 cm square on it with a bright thread. Then dump this sample in the washing machine and check how it decreases.

According to the declared yarn- the density of knitting before and after felting should match the following:

Knitting density before felting: 10 x 10 cm = 16 stitches and 22 rows

Knitting density after felting: 10 x 10 cm = 20 stitches 29 rows

And if your data is different (and this may be due to a different yarn, too tight knitting, or vice versa, your habit of knitting loosely and sweepingly), then you need to dial the number of loops on the knitting needles a little different. In accordance with how your prototype differs from the one shown above.

In order not to peer into the small print and encrypted abbreviations, I decided to paint step by step and in rows the whole knitting process and hat assembly.

STEP 1 - knit the main part of the brim of the hat.

We start knitting from the fields - that is, we collect 124 loops on circular knitting needles and knit circular rows with the front stitch. 20 rows in a circle. And we get the straight part of the fields (gray shading on the pattern of the fields). And we will only have to connect that part of the fields, which will be an elongated triangular shape in the pattern from the diagram below.

STEP 2 - start changing the shape of the fields

(narrow on one side and wide on the other side).

At a height of 9 cm (= after 20 circular rows) we knit short rows- every other row we will decrease by 10 loops. This is necessary so that our fields turn out to be different in level - on the one hand, our field will turn out to be wider (there will be more rows), and on the other hand, our hat field will be narrow (in the place where we reduced every second row by 10 loops). Now you will learn how it is done, and understand how it will look.

I decided write each row, which you knit - so that you can knit without bothering your brain by strictly repeating the steps described below.

So, at a height of 9 cm (after 20 circular rows), we knit short rows as follows.

We have 124 loops on the knitting needles. We start knitting 21st circular row but we knit this row not to the end, but to the last 10 loops of the row(that is, we do not knit all 124 loops that are on the knitting needles, but only 114 facial loops) , after which we stop and we need to turn the work back to front (so that the wrong side of the knitting is already looking at us) and we can knit in the opposite direction of the circle.

And in this back way we do 1 yarn over on the right needle And knit the 22nd row – the same reduced by the number of 114 loops, but already on the wrong side. We knit this amount to the end and turn our knitting back to the front side to knit the next 23rd row. Here's what it looks like in a picture (I hope I made it clear).

On this front side and knit 23rd front row- but we also do not knit all 114 loops - but again we turn the knitting without reaching 10 loops to the end. That is, in the 23rd row we must knit 104 front loops. And turn to the wrong side - to knit on it 24th row - 104 purl loops (before each purl row, do not forget to make 1 yarn over on the right knitting needle). And we turn back to the front side.

25th row we also do not knit 10 loops to the end - but stop at knitted 94 front loops- and turn to the wrong side. Where do we knit 26 row - purl 94 loops. And we turn back to the front.

This 27th row we also do not knit up to 10 purl loops - that is, we only knit 84 front loops. Turn knitting inside out and knit 28th purl row - 84 loops. And again we turn to the front side.

This 29th row we also reduce by 10 loops - that is, we only knit 74 front loops, and turn the knitting on the reverse wrong side, and knit 30 row - 74 purl loops. We return to the front.

This 31 row- we again reduce by 10 loops - that is, we only knit 64 front loops. Turn inside out - knit 32 row - 64 purl loops. We return to the front side.

This 33 row 54 front loops 34th row - 54 wrong loops. Expand to the front.

This 35 row- we again reduce the knitting by 10 loops - we knit only 44 front loops. Turn inside out and knit 36th row - 44 wrong loops. We return to the front side.

This 37 row- we again reduce the knitting by 10 loops - we knit only 34 front loops. Turn inside out and knit 38th row - 34 wrong loops. We turn to the front side.

This 39 row- we reduce the knitting by 10 loops for the last time - we knit only 24 front loops. Turn inside out and knit 40th row - 24 purl loops. And after that, we turn the knitting with the front side towards us for the last time. This was the last short row. We are back on the front side.

And now we can continue our usual circular knitting- together with all 124 stitches in a row.

STEP 3 - knit the main dome of the cap.

So, we have 124 loops on the knitting needles, already connected fields hang from the knitting needles (on one side of the circle, the fields are wider 40 rows high, on the other hand, narrower 21 rows high.). Now we will knit the hat itself - the part that is pulled over the head.

The first thing we need to do is seal the transition from the brim to the dome of the hat. To do this, we knit each loop in together with a crochet.

Here is one way to close the loops - with a hook.

So, we closed 12 loops - and therefore we have 112 loops left on the knitting needles. Of these, we will knit the dome of the cap.

We transfer these loops from circular knitting needles for 4 stocking needles- 28 loops on each of the four knitting needles. And we knit in a circle 30 facial rows up. (Our knit rises another 13.5 cm (excluding margins).

Now we stopped and marked every 14th loop on our knitting (you can pass red ribbons between every 14th loop). We will need these marks (there will be 8 of them) in order to properly reduce the cap (narrow the dome).

We noted and in the next circular row we knit each 14th loop together with the previous one (that is, we knit 13 and 14 together). As a result, we have 104 loops left on the knitting needles.

Next, we knit like this.
In every 4 rows - repeat the decrease(we knit the loop marked with a ribbon together with the previous loop). Doing so 3 times. (That is, 3 rows are simple, 4 we decrease - 3 rows are simple, 4 we decrease and 3 more rows are simply 4 we decrease - three such calls). As a result, we have left 80 stitches on needles.

Now let's get stronger.

In each 2 rows we make the same decrease (in the same places marked with a red ribbon). We repeat 6 times. That is, 12 rows we alternate one simple + one subtractive. As a result, we have 32 loops left on the needles.

And now we come to the end of knitting.

Three rows in a row we make a decrease - in each row. In the same places marked with a ribbon. And on the spokes we have 8 loops left.

We finish knitting: cut the thread, stretch the tail of the thread through these last 8 loops. and pull tight. We fix the end of the thread in the body of the cap (using a crochet hook).

STEP 4 - we roll the hat

in the washing machine

+ form its final form.

And here is a detailed description of how such hats knitted from wool can be DOWN IN THE WASHING MACHINE ...

We place a hat in a laundry bag.
Fall asleep in the washing machine colored laundry detergent. DO NOT add fabric softener or detergent for woollens.
Choose mode - delicate wash(it is with a large flow of water - we need this). Mode for washing wool is NOT NECESSARY.
Setting the temperature 40 degrees.
Best with a hat in the car shove something rough(like jees or towels) - to create additional friction.
We start washing - as a result of which the product will decrease by 1/3 (i.e. 30%) After that, we take it out - wring it out and wet it PULL-STRETCH to the size of your head ... (so that she remembers this shape) ...
and then we put it on a BLUE where it will dry. It is, of course, understandable that you do not have hat blanks in your household - n oh you can find a replacement for her- for example, a suitable-sized children's ball or a three-liter jar (to increase the size of the jar, you can wrap it with several layers of newspaper, fix it with tape and put on a bag for cleanliness) - put on a hat and leave it like that until completely dry.
After you have pulled the hat onto the blank, you must level its fields - stretch the fields so that on one side they are 9 cm, and on the other 15 cm.
AND UNTIL THE HAT IS DRY, we do its styling. .

Here is a photo to help you. We approach the mirror and try to lay the fields as shown in the photo. The instructions say this:

Gray hat styling: Align the margins (by 9 cm and by 15 cm). Turn the fields up (both the short and long sides. Take the edge of the short field turned up and turn its half down. Stab this place with a hat pin (buckle + wand).

Volumetric hats are not only a suitable headdress for the winter, but also a real trend of this year. They are presented in a wide range, differ in style, design, pattern. Without a doubt, such hats look spectacular, and wearing them is a real pleasure.

We offer to crochet a voluminous hat with your own hands. The advantage of such a hat is that even those who are just trying their hand at needlework can knit it. And the work won't take long.

What you need to work

The headdress is knitted with a pattern of lush columns. In the process of work, they lie in different directions, forming a thick "braid".

Knitting in this technique does not require additional decorations. Only yarn and hook. A knitted snood or scarf can complement the accessory.

What yarn to choose

Best to use yarn with mohair in the following combination:

mohair - 40%;
acrylic - 60%.

For one product, 100 g is enough (one ball). Knitting in two threads.

A product made from such yarn turns out to be very warm, fluffy and keeps its shape perfectly. The color is chosen according to personal preference.

Important! It is useful for beginners to know that when working with a dark thread, it is more difficult to count the loops and see the pattern. Therefore, the first time it is more convenient to work with light yarn.

What kind of hook is needed for knitting

The size of the hook depends on the chosen yarn. Perfect for our bifold yarn hook size 3.5 mm.

Reference. It is best to choose a tool with an aluminum tip and a plastic handle. It is comfortable to hold, and the hand will not get tired in the process.

How to knit a women's voluminous hat

Now that everything you need is ready, you can start knitting. But first, let's decide on the size.

How to take measurements

A beautiful and appropriately sized finished product is difficult to make without taking measurements. Therefore, do not neglect this step. We need two measures.

OG (head girth) - the volume of the product depends on it.
MV (height from the crown to the bridge of the nose) - determines the desired height of the accessory.

If for some reason it is not possible to take measurements or the product is knitted as a gift, you can use the standard size chart.

Age	OG, cm	MV, cm
breastfed babies	25	11
Small children under 6 years old	35–40	10–15
Children and teenagers	40	19–20
Adults (small and medium sizes)	52	22–25
Adults (large size)	60	21–23

After the measurements are ready, you need to decide on the number of loops. The linked sample will help with this.

Cast on 10 stitches and work 10 rows with the pattern you plan to make the hat. Measure the sample with a ruler and, based on the exhaust gas measurement, calculate the required number of loops.

Attention! For the accuracy of the calculation, count how many loops are in 1 cm of the canvas.

For example, if there are 2.5 of them, and the OG is 52 cm, then the number of loops will be: 52 * 2.5 = 130.

How to knit a hat with fluffy columns

A voluminous hat for women can be knitted in several ways. The most common are knitting from the bottom up and from the top down. Before you get started, you need to learn how to knit the basic pattern.

Lush columns

Cast on the number of loops, a multiple of 5 + 3 lifting loops.
First row: *three double crochets, two air loops*. Continue to the end.
Second row: four lifting air loops, 2 air loops.
Next, in the arch of the two loops of the last row, knit 3 columns, proceed to create a magnificent column. * Yarn over, insert hook behind the second stitch of the last row, pull out a long loop *.
Repeat from * four more times.
Then knit all loops together. Knit an air loop and three columns from the next arch. So to the end.
The third and all subsequent rows are similar to the second.

The first way of knitting: from the bottom up

Cast on 140 stitches for 28 pattern repeats. You can score more or less, as long as the number is a multiple of five. Connect in a ring.
Knit two rows in the round according to the description of the pattern.
Knit the third in the opposite direction. This is necessary so that the columns look the other way. Do this until the end of the work.
Having reached the required height, start cutting the loops.
In each next row: instead of groups of three columns, knit two; knit one instead of two. And make lush columns not from five loops with crochets, but from four.
Next: conditionally divide the canvas into four equal parts. At the end of each of them, reduce one rapport. Do this for six more rows until four rapports remain.
Pull eight single crochets into a ring, secure.

Second way: top to bottom

Dial a chain of six loops, connect into a ring.
Make 6 lush columns like this. * Yarn over the hook, pull the working thread through the ring * five times. We stretch the thread through all the loops.
Knit the rest of the rows as follows. Add columns in the third after one, the fourth after two, the fifth after three, and so on.
when the width of the cap is necessary, continue knitting without increments.
After knitting to the required size, break the thread.

The hat is ready, it can be decorated with a pompom.

Reference. In the second version, the lush columns are even, and it is knitted in a circle.

How to make a pom pom hat

The finished product looks very interesting with a fur pompom. To make it, you will need:

piece of natural or artificial fur;
strong thread;
scissors;
a piece of synthetic winterizer
ribbon.

The work is performed according to the following algorithm.

Cut out a circle from cardboard. The larger it is, the larger the pom-pom will be.
Attach the template to the fur from the wrong side, circle, carefully cut out.
Take a thread with a needle, sheathe a circle with large stitches along the edge, without fixing the ends.
Roll the synthetic winterizer into a ball, tie it with a ribbon, leaving long ends, so that later you can attach the pompom to the hat.
Insert the synthetic winterizer inside the pompom, tighten the ends of the thread and tie into a knot.
Attach the finished pompom to the headpiece with ribbons.

Wear to health!

Winter is coming soon. It's time to crochet a new warm hat. In the cold, you should not go without a hat. And at the same time, I want to look beautiful. Therefore, we present you a selection of knitting patterns with descriptions of crochet winter hats with patterns and descriptions so that you have a choice for every taste.

Spectacular crochet winter hat

Warm cozy set for the winter

The first option is a bright knitted hat for the winter and. The kit is knitted from thick sectional dyed yarn, so you can knit it in a few days, even if you are a beginner knitter. The principle of knitting embossed columns is shown in the photo step by step, the pattern is completely simple.

You will need:
- yarn with parameters 100met / 100gr - 200 grams;
- hook number 8;
- faux fur pom-poms 15 cm in diameter.

Scarf pattern: (multiple of 4)
1r .: 3 air loops (VP), then s / n columns;
2p .: 2 VP, * 2 relief columns s / n (RSSN) behind the front wall (the hook must be inserted in front around the column s / n of the lower row), 2 semi-columns * - repeat from *, finish 2 RSSN behind the front wall, 1 half-column.
3p .: 2 VP, * 2 RSSN behind the back wall (insert the hook from the back into the bottom row), 2 half-columns * - repeat from *,
finish 3 half-column.
4r .: 2 VP, * 2 half-column., 2 RSSN behind the front. wall *, 3 half-column.
5r.: 2 VP, * 2 half-column., 2 RSSN behind the back wall * 3 half-column.
Repeat the pattern for the first time from 1 to 5 rows, then from 2 to 5 p.

Elastic band (for a hat): (circular rows, a multiple of 4)
1r .: 3 VP, then column s / n, finish 1 connecting column in the initial p .;
2p .: 2 VP together 1st p / st, * 2 RSSN behind the front wall, 2 p / st *, finish 2 RSSN behind the front wall, 1 p / st, 1 connecting column. to the second initial VP.

Density: main pattern 7 p. \u003d 10 cm.

Description of knitting cap:

Dial 36 VP, close in a circle with a connecting column.
Continue to work with a 14 cm elastic band.
Start rounding the hat to form the crown. In the first r. knit all half-columns together (= 27 stitches). In the second r. knit embossed st.s / n together (= 18p.). Next, knit a row of st.s / n, knitting them 2 at a time (= 9p.). Another r. without reduction and pull off the rest with a working thread. Reinforce firmly.
On the edge of the cap, make 1 p. crayfish step (st.s / n place from left to right).
Sew on a pom-pom.

Loop Scarf: Start with a chain of 24 ch and 3 ch for the instep. Continue with pattern for a 170 cm scarf. Sew along the short side.
Source: Little Diana magazine.

Beanie made of bulky yarn for the winter

Many girls and women love small neat hats. But in the winter cold you need to dress warmly. An excellent way out for this case is knitting from bulky wool yarn. The headdress will look stylish with fur coats and down jackets.

Size: 56-57 cm
Required:
- two types of yarn 1 - from Lana Grossa: Famoso dark gray (45% wool, 55% polyacrylic, 38met / 50gr) - 100 grams;
- 2 - Uno gray-black (52% wool, 48% polyacrylic, 65met / 50gr) - 50 grams;
- hook number 12.

Density: 5 p. \u003d 10 cm

Description of crochet hat:

Start at the top of the cap with two air loops with #1 thread. In the 1st circular row, tie 6 columns b / n in the second air.p.
In the 2nd r. continue in the same st and double sts (=12 sts). In the 3rd r. double after 1 p. (= 18p.).
In the 4th - after 2 p. (= 24p.).
From 5 to 14 p. knit without additions. Finish with a row of connecting posts.
Use yarn #2 to make a pom pom.

Source: Filati magazine

White lapel winter hat and fishnet scarf

White is always a trendy color for winter.

It is good when the hat is warm, but if there is also a lapel, then in winter it will be even warmer in it. And it will look chic over a jacket, fur coat, down jacket. Let's take a look at the knitting pattern for a warm winter crochet. But only those who own a hook and knitting needles can knit it.

Size 56 cm
Required:
- 450 g of yarn with parameters 190met / 100g;
- knitting needles No. 3.5;
- hook number 3.5.
Density: 23 p. = 10 cm

Scheme for making a women's hat:

Cast on 96 sts on needles, work in stockinette stitch for 23 cm in the round (all sts are knit).
For the top of the hat, knit in every second p. all loops two together. Pull off the remaining 24 sts and secure.
On the bottom of the hat for an openwork lapel, crochet 10-12 cm of the pattern according to the pattern. Bend the lapel 2 times, laying out a beautifully openwork pattern.
For a scarf, cast on 51 air sts. and knit 180 cm with a pattern according to the scheme (= 12 rapports and 3 sts for symmetry). Make 46 tassels (23 per edge) by cutting 8 strands 30 cm long for each tassle.

Crochet blue hat with a pom-pom for a girl

Crochet a bright hat for winter weather and it will immediately become warmer. The effect of stripes creates a thread of sectional dyeing.

For head circumference 50-54 cm.
Required:
- yarn with characteristics 250met / 100gr with changing colors - 100 grams;
- hook number 4.
Hat pattern: double crochets in a spiral without connecting sts.

Blue color for blue winter

How to crochet a hat?
Work begins with the top of the cap.

Dial 10 air sts, connect in a circle and tie 10 st.s / n.
Row 2: Double the number of stitches by inserting your hook twice in each gap (=20 stitches).
In the third r. increase after 1p. (= 30p.), In the fourth - after 2p. (= 40p.), 5 and 6 p. - without increments, 7 p. - add after 1p. (= 60p.), in 8 p. double every 6 sts (=70 sts).
Then continue without increments until a height of 22 cm.
Finish with one p. st.b / n.
Make a pompom from the rest of the thread and sew it to the hat.

Source: Little Diana Magazine

Delicate winter hat takes from mohair crochet

If we talk about the winter knitted fashion, then it is impossible to get around the products knitted from mohair. The yarn is soft, fluffy and warms well in the cold season. The presented version of the cap is very simple. Even a novice craftswoman, who picked up a hook for the first time, can knit it. So, the crochet knitting pattern for a winter knitted hat for women is step by step.

Mohair charm for winter

Head circumference: 54-56 cm, hat height without pom-pom - 21 cm.
You will need:
- Mochairlana yarn from Lana Grossa (42% mohair, 33% merino wool, 25% polyamide, 137met / 25gr) - 50 gr gray-lilac;
- hook No. 4.5 and No. 5.
Density: 18 semist. = 10 cm

How to knit a half-column: yarn over 1 on the hook, pull up a loop, then with one new yarn over all three sts on the hook. Knit half-columns in circular rows, each circle starting from 2 air p. lift.
How to add loops: from one half-column of the previous river. knit two at once.
How to decrease loops: yarn over the hook and pull 1 st through two loops, then with a new yarn over all the sts on the hook.

Step by step instructions for beginners:

Crochet No. 5 a chain of 4 air p., close them in a circle of connecting st. Next, knit the hat with semi-columns.
We make additions: 1 circle - dial 2 resp. for lifting and increase the number of half-columns to 10.
2 circle: double each half-column (= 20p.);
3rd circle: add after one p. (= 30p.);
Round 4: double every third half. (= 40p.);
5 circle: doubling every fourth half. (= 50p.);
6 circle: every fifth half-column (= 60p.);
7 circle: every sixth half-column (= 70p.);
8 circle: every seventh (= 80p.);
9 circle: - "- the eighth (= 90p.);
10 circle: - "- the ninth (= 100p.);
11 circle: - “- the tenth (= 110p.);
12 circle: - "- the eleventh (120p.)
13 circle: knit without additions.
At this point, you have knitted the flared part of the hat.
Now you need to decrease the loops:
14 circle: close 12 times all 9th and 10th p / st. together (= 108 stitches);
15 circle: 12 times all 8 and 9 p / column. together (= 96p.);
16 circle: similarly, knit together 7 and 8 p./St. - 12 rubles;
17th circle: 12 p. all 6 and 7 half-columns (= 72p.);
4. Next, we will knit a crochet hook No. 4.5:
18-23 circles: single crochet for 72 p.
Make a bomb with a diameter of 5 cm and sew to the hat.

Several models of winter hats for experienced craftswomen

For those knitters who already have considerable experience in crocheting patterns, it makes no sense to give step-by-step instructions, as for beginners. Enough patterns. You yourself will be able to do all the calculations and understand the pattern of the pattern.

Pattern for experienced craftswomen

Another crochet pattern for a winter women's hat

Star pattern for a hat

Knitted hat with colored stripes

Incredibly beautiful crochet hat pattern:

For lovers of exclusive hats

Stylish female hat style for a woman

Speaking of winter knitted hats, it is impossible to forget about caps. Your choice of two with a beautiful pattern.

You will need:
– Patons Canadian threads (100gr/187met);
- hook number 5;
- 2 buttons.
Density: 14 Art. - 10 cm

How to knit a hat:

Dial 3 v / n and lock into the ring. Knit from 1 to 14 rows according to the crochet pattern. Expansion stage.
Then repeat rows 13 and 14 until you reach 20.5 cm from the top.
We proceed to the manufacture of the bar: 1p. - 1 v / n, 1 column b / n in each column, connecting. pillar. (= 64p.). Repeat this row again.
Visor:
1r .: 1 v / n, (1 st. b / n in all columns) - 46 times, turn the product;
Row 2-10: repeat Row 1. turning rows "back and forth."
Unscrew the side edges of the visor as in the photo. Fasten them with buttons.

Volumetric knitted model for the winter

Development of the Urbu Garn style, forwarded from the Swedish by Marina Lindberg.
It will take 100g of medium thickness yarn and hook No. 4.

Classic beret - always in fashion

Knit a chain of 3 stitches and join in a circle. Each new r. start with an air loop. From the ring, knit 7 columns b / n. (STBN)
1r.: * 1 STBN, 2 columns each. in every 2nd column. previous river. *;
2p.: * 2 STBN, from one pillar. - two *;
3r .: as the second;
4r.: * 3 STBN, from one pillar. - two *;
5 and 6 p.: as the fourth;
7r.: * 5 STBN, from one pillar. - two *;
8r.: * 6 STBN, from one pillar. - two *;
9r.: we knit in the same way, increasing the loops in each 7th loop;
10p .: we add in the eighth p .;
11p.: we add in the ninth p.;
12p .: we add in the tenth p .;
13th p.: increase in the eleventh p.;
14r .: increase in the fifteenth p .;
15-18 rubles: without additions;
19r .: 13 STBN, * pull the item from the next column. (=2 sts on hook), pull sts from next st. (=3 sts on hook), pull through all 3 sts, 13 sts *
20r.: * 7 STBN, one on three p. As in 19r. *
Row 21-27: Knit according to pattern.
Next, we knit the bar: out of 70 STBN - 5 rows.

Visor: along the edge of the plank, knit 34 STBN - 2 rows. Then at the beginning of each r. skip 1 p. Such reductions must be done 8 times.
Finally, tie the entire STBN hat around the entire circumference.

Perky hat with columns

Morning trendy color - Bay of Biscay

A cheerful crocheted model of a winter hat, trendy this season, in the Bay of Biscay color, diversifies your wardrobe. The color looks especially advantageous in combination with dark chocolate.

Size: 52-54 cm
Required:
- sectional dyeing yarn with characteristics of 90 meters per 50 gr;
- hook number 6.
Pattern for the cap: circular p. in a spiral - * 1StBN, following p. skip with air.p. * - repeat from * . Knit the next rows of the column from the air section of the previous river.

Progress of work: complete a chain of 64 p, close in a circle with the help of a connecting stitch. and knit with a pattern for a hat. When you knit 14 cm, knit all 7 and 8 stitches together (= 56 stitches). In the second subtractive river. - 6 and 7th at once (= 48p.). Decrease in the same rhythm until 8p remains. Pull them together with a working thread and fasten. 8 cm in diameter.

Charming women's knitted hat with a bell

The knitting pattern has already been given on our website, you should not repeat it, follow the link under the photo.

The combination of a beautiful pattern and sectional yarn is incredibly beautiful!

Head circumference: 54cm
Required:
- yarn sectionally dyed Kid Royal Missisipi (62% kid mohair, 38% polyamide, 500met / 50gr) - 100 grams;
- hook number 1.5
- brooch clasp.
We knit with a thread in two additions.

A chain of 6 air.p. close in a ring. Then we continue according to scheme 1 to the desired diameter of the cap, then we knit straight. On the bottom edge of the cap, knit the pattern according to scheme 2. Diagrams 3, 4 and 5 show how to make 3 flowers. Connect them together. Pin onto the hat with a pin.

Two models of winter hats. Please note that the green cap is double.

Video master class on knitting hats for winter: