We decorate nails in various ways. How to glue stickers on nails: a description of the process and recommendations How to glue a vinyl sticker on glass

The fashion for themed drawings for decorating nails continues to be in trend this season. And if quite recently many women used the services of a nail art master and spent a lot of time in the beauty salon, while the specialist painstakingly performed drawings on the nails with a thin brush, today you can buy a suitable set of sliders and make a luxurious nail design at home. Modern stickers with drawings and patterns are made on thin films that are easily transferred to the nails, where they are securely fixed. If you use gel polish for home manicure, then you can decorate the color coating with water-based stickers and securely fix them with top gel. Before sticking stickers on your nails, be sure to familiarize yourself with the procedure for performing the procedure so that the fashionable manicure remains in its original form for several weeks.

One of the most popular areas of modern nail art is a slider design using water stickers. These sliders are sold as thin, pictured films that peel off easily from the paper backing when in contact with water. The film can be gently smoothed with an orange stick on the surface of the nail. Literally in half a minute you decorate each nail with a pattern of any complexity, saving time and money on visiting a beauty salon. If you want to learn how to properly stick stickers on the coating applied to the nails, watch the video tutorials for beginners and instructions with photos in this article. When choosing sliders for nail design, pay attention to the size of the pictures, which should match the size and shape of your nails. For a French manicure, you can use a slider fragment to highlight the free edge of each nail with a beautiful pattern, and you can easily cut off the excess film with scissors, and then smooth the edges with a soft nail file.

♦ CLASSIFICATION OF STICKERS BY APPEARANCE AND SHAPE

Silicone stickers.
Silicone stickers create a three-dimensional effect on the nails. Can be glued on a dried varnish, but be sure to fix it with a top coat;

French sliders.
Water based sticker sets. It is convenient to glue fragments with a variety of patterns on the free edge of the nail so as not to draw a “smile line” for French manicure with paint;

Stickers with 3D effect.
Decor with an adhesive base to create a three-dimensional manicure. The 3D effect is achieved due to the special arrangement of image fragments on the film;

Film stickers with patterns.
Ornament with repeating prints or small patterns (lace, monograms, graphic drawings). These stickers are easy to stick on not completely dry varnish or on a sticky layer of colored shellac. After the procedure, the completed design is fixed with a top coat;

Photo stickers.
High image quality with fine detail. In order to separate the photo sticker from the substrate, the workpiece should not be soaked with water.

♦ HOW TO GLUE WATER STICKS ON THE NAILS CORRECTLY

❶ First, we do a hygienic manicure and prepare the nail plates for applying the first layer of coating: we keep our fingers in a bath of warm water for 5-10 minutes, treat our hands with an antiseptic, push back and remove the cuticle with well-sharpened nippers, give the free edge of the plates the desired shape;

❷ Now you can grind the free edge of each nail with a glass file, and then treat the surface of the plates with a polishing buff. Move the tool in one direction;

❸ Soak a lint-free cloth with a degreaser and wipe each nail, removing grease stains;

❹ Now we apply several layers of a single-color background coating. It is desirable that the base for the decor be light, pastel colors. If gel polish is used as the base, then first you need to apply a base layer, and then polymerize in a UV lamp;

❺ Using scissors with straight sharp blades, cut out a fragment of the slider from a single sheet. When cutting out the sticker, consider the size and shape of the nail;

❻ Take the cut-out fragment with thin tweezers and dip it into water for five seconds, and then gently remove excess moisture from the sticker with a lint-free cloth (second option: dip a cotton pad into the water, wring it out a little and press the cut-out sticker against it for 10 seconds);

❼ Separate the printed film from the substrate and transfer it to the surface of the nail. We smooth out the wrinkles on the film with an orange stick. It is desirable that there is an indent of 1 mm between the cuticle line and the edge of the sticker;

❽ We apply a layer of top coat on the decorative element and seal the end (if we work with gel polish, dry the top in a lamp);

❾ At the end of the procedure, we rub softening oil into the periungual skin and cuticles with massage movements.

♦ WHAT IS 3D NAIL STICKERS

Today, all kinds of prints on clothes are very popular. Pants and jackets, t-shirts and jumpers, as well as other wardrobe items are decorated with stickers. They can be found both on children's clothes and on adults. It will not be difficult to buy clothes already with ready-made glued stickers, but it will also bring considerable pleasure to independently decorate your favorite thing with a similar decor. How to stick a sticker on clothes? - We will offer you different ideas and ways to create an original decor on things in this article.

Why do we need thermal stickers and where to find them?

How to stick a reflective sticker on jeans? Very often, interesting bright stickers are applied and glued to children's clothes, thus decorating the outfits that needlewomen-mothers sew for babies with their own hands. They are used not only for decoration, at other times they help to mask the defect.

You can buy this decor in different places:

In the distribution network of many stationery stores, sewing accessories and supermarkets, ready-made stickers for clothes are sold, which can be quickly and easily applied to any fabric.
If you want an original print, you can order a decor at a printing house, where they will make a picture for you according to your individual design. It is also possible.
If you are a creative person, then it will not be difficult for you to make a sticker on clothes yourself.

You will find interesting ideas and tips on how to make and attach stickers on T-shirts with your own hands below in the text of this article.

Varieties of stickers for textiles

Many from childhood remember stickers with Mickey Mouse, when a torn favorite thing was repaired with a similar application. Appliqués on clothes have always been fun and cute.

Nowadays, with the development of modern technologies and industrial capacities, the variety and quality of fabric stickers have received a new round in production. Knitted T-shirts, T-shirts and sweatshirts with various prints are mass-produced, and these prints are all the same fabric stickers.

Decals that are glued to clothes come in different types and sizes. There are also endless design options:

Stickers that imitate machine embroidery are very popular.
Imitations of photo printing look very interesting.
If you just want to brighten up boring clothes, you can opt for decals made of glittery elements and rhinestones.
Young people will definitely like stickers with emblems of fashion brands, logos of popular music groups.
There are many “neutral” images among decals: floral motifs and ornaments.
Children's stickers with the image of stylish cars, cartoon characters and fairy-tale characters will really please any kid.
Stickers can be made from flock, velvet, satin, satin or cotton. Most often they are pasted on paper.

Important!Fabric stickers for clothes can be bought at any fabric and accessories store.

neon stickers

In addition to simple thermal stickers, there are stickers that glow in the dark. They are widely used, applied to a special work uniform or to children's clothing, which will delight kids with their glow.

Do-it-yourself thermal stickers for clothes

If the thought of decorating your own dress or T-shirt with a sticker scares you, then you simply do not know all the nuances of this process. It's actually very quick, simple and easy to make hot stickers for clothes with your own hands.

Materials and tools

For this you will need:

A plastic bag with a high-quality image that will decorate your clothes in the future.
Scissors.
Parchment.

Important! Plain paper is not suitable for creating this type of sticker. Parchment can be replaced with baking paper, but it must be only beige.You can also use new paper cake pans in this case.

Iron.
The thing that the sticker is applied to.

Instructions on how to make a thermo-sticker on clothes with your own hands:

Cut out the drawing from the bag.
Attach the cutout to the place on the fabric where the sticker will be glued.
Cover it with parchment paper.
Iron the top well with a hot iron.
If the sticker does not stick very well, go over it again with a hot iron.

You can make a beautiful application not only from the package.

Making fabric stickers for clothes

You can also make your own fabric thermal stickers for clothes with your own hands. To make such an application, you need a printer that prints on fabric and an adhesive cobweb.

Important! Adhesive web is a special double-sided coated tape that must be laid between the thing and the sticker, and then carried out with a steam iron.

Manufacturing process:

Print image on fabric.
Cut out the drawing.
Stick the sticker on the fabric with a steam iron to the clothes using a glue gossamer.

How to stick a sticker on clothes?

The store sells a wide variety of thermal stickers that are very popular in our time. Using them, you will close a hole, hide a stain or some other flaw on your clothes, or simply update an item that has already become boring to you. When the thermal sticker is purchased, it is necessary to prepare everything necessary for gluing it and follow the instructions below.

Procedure:

Prepare the surface on which you will apply the thermal sticker to the fabric. An ironing board is best for this. You can also use a table. In extreme cases, you can do it on the floor.

Important! Be sure to place a dense fabric folded several times on a table or floor.

Lay the clothes flat on the surface without folds or wrinkles.
Attach the sticker in the place on the fabric where it will be in the future, pattern down. The paper layer should be on top.

Important! On the wrong side of any type of thermal application there is an adhesive layer. It is especially noticeable on textile stickers that imitate embroidery.

It is better to “move” the drawing in advance and imagine how it will look in the future on clothes.

Important! It will no longer be possible to move the application after exposure to the iron.

Be sure to stick with it.

Important! To prevent the fabric from spoiling, place paper on top of the sticker.

Place the iron on the paper under which the sticker is located, and press firmly. Hold for no more than 15 seconds. If the size of the pattern is larger than the iron, you should press down on the entire perimeter of the application several times.

Important! Iron the edges and small parts of the pattern well.

Remove the paper from the drawing. This should be done very carefully. Be sure to ensure that the entire pattern lies evenly. If you suddenly find a defect somewhere, you need to go over this place with an iron again.

Important!So that the sticker does not reach for the paper after removing the latter and does not deteriorate, you need to let it cool.

If you are sure that the entire design is evenly printed on the fabric, you can completely remove all the paper.
After - iron the place where the sticker is placed from the inside.

Application is ready! You can enjoy the result of your work and wear a “new” old thing.

Important!Do-it-yourself thermal stickers for clothesit is not difficult to apply, the main thing is to do everything correctly, point by point. If you make a mistake somewhere, in the end you risk ruining not only the application, but also the clothes.

Stickers bought in a store or made by yourself are no different from one another. All of them will please you as long as possible. Such fabric decor does not require special care.

We fix children's things with thermal stickers

No matter how neat your child is and no matter how hard he tries, little troubles will certainly happen in the process of wearing things: either a stain on your favorite T-shirt from chocolate will remain, or the trousers will tear. Do not scold children for such minor annoyances.

If desired, these things can be put in order without much effort. There are different options for how to fix such a thing:

The option with sewing up torn elements is suitable when there is a certain supply of fabric for strength. This option is good when the hole turned out along the seam - it was sewn up, and there are no problems.

Important! In order for the seam to hold and not diverge, you need about 3-5 mm of “spare” fabric.

In the case when a hole has formed far from the seam in a conspicuous place, it is better to eliminate it by gluing it on both sides.

Important! You need to repair the thing as soon as the hole appeared, while the edges have not yet frayed.

How to stick a thermal sticker on clothes to patch a hole?

When the hole is “fresh”, there should be no problems with its elimination. Especially if the tear occurred along the fabric of the jacket and the lining and insulation remained intact inside. In this case, only the top layer of fabric needs to be repaired from the front side:

You will need a thermal sticker and a piece of thin interlining. These elements should be at least a centimeter larger on each side in area than the hole.
Inside, carefully lay the interlining through the front torn fabric of the product.

Important! Interlining must be put with an adhesive layer up, that is, from the inside to the torn fabric itself.

You can do without thermal stickers. It is enough to glue the inner sides of the hole with interlining. In this case, you should carefully align the edges so that the interlining is not visible. And it is even better to choose non-woven fabric to match the color of the product.
In addition to attaching a sticker to a problematic area, you can stick the same decor, for example, on a jacket pocket. It will turn out like a factory decoration.

Important! If you just sewed up a hole, it is unlikely that your thing would have the same presentable appearance.

Subtleties of working with stickers:

If the basis of the sticker is transparent, it is necessary to iron it through gauze.
If after washing the fabric sticker is still peeled off, the adhesive web will help you restore the pattern.

Important! In order to prevent the decal from peeling off after washing, it is better to wash such things in a gentle cycle.The washed thing, on which the sticker is applied, should not be squeezed hard.

Clothes stickers: business idea

When you already know how to properly glue stickers on clothes, you can open your own business. Where do you need to start, in this case? What materials will be needed?

Opening such a business does not require a large initial capital:

You can start by embellishing clothes for your acquaintances by applying an original appliqué on them.
Then you can buy solid-colored T-shirts in bulk and apply an application on them yourself, for example, an original inscription or a famous cartoon character on children's T-shirts.
For young people, you can stick statuses or slogans that are popular at the moment in English letters.

Important! By selling such T-shirts, you can invest in further business development, and open your own small boutique or online store, where you can already take orders for applying original inscriptions and patterns on fabric.

footage

Iron-on stickers are the cheapest and easiest way to decorate or mend your own clothes today. Some home craftswomen even collect a collection of such applications. And this is a good decision. It is very convenient to always have such a set on hand so that you can use it when inspiration strikes again and you want to decorate one of your things, or you have to urgently repair a damaged outfit.

Attaching decals to clothing is becoming popular. This is a way not only to bring a damaged thing back to life, but also to decorate an unremarkable wardrobe detail.

Why you need a thermal sticker

Thermal application is also called a thermal patch or a thermal sticker. Gluing them is quite simple, because they are covered with a special adhesive layer on the reverse side. Under the influence of high temperature, it melts and provides adhesion to different surfaces. You can transfer any sticker at home using an iron.

When is it appropriate to apply a thermal patch:

Thermal stickers will allow you to turn an ordinary thing into an exclusive one. Various drawings in the form of animals, flowers, symbols will decorate clothes. Children will like it, because there are applications with cartoon characters, animals and toys, and it will be appropriate on youth casual clothes.
The sticker will hide small defects that have formed in the most visible place: holes, puffs, spots. This way you can save even a Bolognese jacket, which is indispensable in wet weather and on hikes.
The heat patch will strengthen fabric that is about to tear.

Iron-on applications can imitate hand embroidery or photo printing. Decorative elements are additionally attached to some samples - rhinestones, beads. The fabric for thermal stickers is usually flock, satin, satin or velvet. There are also neon stickers that reflect the light.

How to iron on a patch

How to stick a thermal sticker on a fabric with an iron, instructions:

The clothes to be appliquéd should be placed on the ironing board.
The protective film is removed from the reverse side of the patch.
The iron heats up to the maximum temperature that the fabric can withstand. If in doubt, it is best to check in an inconspicuous area to see if the clothing is damaged.
The steam function must be turned off.
If necessary, cut off the thermal sticker along the contour.
The fabric should be straightened so that wrinkles do not form under the application.
The place where the patch will be attached must be preheated with an iron.
The sticker is placed face up and covered with a sheet of paper or tracing paper.
A hot iron is placed on the paper and pressed with force, then held for 10-15 seconds to melt the adhesive surface on the patch.
If the sticker is large, then it is heated in parts.
Small parts are pressed down with the tip of the iron.
The lower the temperature, the longer you need to hold the iron on the fabric.
The protective layer is removed after 5-10 minutes, it needs to cool down.

Advice! It is better to glue the patch on cotton fabrics. It is not recommended to attach to synthetics, leather, silk and knitwear, so as not to deform the product.

Care rules

These rules will help the application last longer:

The product is washed by hand at a water temperature not higher than +40.
Before wet cleaning, clothes must be turned inside out.
Do not overuse friction. It is advisable to immerse in a soap solution or stain remover solution. Leave for 0.5-1 hour, depending on the dirt, squeeze several times, then take out on a towel and blot.
The item should dry naturally.
The product should also be ironed from the wrong side.

There is nothing complicated in attaching a thermal patch. The cost of the sticker will not affect the budget in any way, but this way you can save a hopelessly damaged item and even make it unique.

Beautiful nails and flawless manicure are the dream of any woman. This is not only a sign of grooming, but also a way to stand out from the crowd, to show your individuality. Today, the nail industry market offers a lot of original products, with the help of which any manicure acquires a special style and allows a woman to be in the spotlight. One of the most spectacular attributes of a perfect nail cover are sliders. What are their features and how to glue such stickers on gel polish?

Features of the decorative element

Nail sliders are one of the most popular manicure techniques. This term, translated from English, means "slide". These are special stickers, which are thin films with a pattern of various subjects. Due to the special composition, such films are securely fixed on the surface of the nail plate.

Slider design successfully replaces art painting, it looks flawless. Applied to gel polish and coatings on top with a fixative, it prolongs the life of a manicure, while not losing color saturation and glossy sheen.

The advantages of such a nail product include ease of use: you can design nails with stickers not only from a professional master in a beauty salon. Such pictures can become an adornment of all fingers or show off only on a few, which looks no less beautiful and impressive. They can be of different sizes, completely cover the surface of the nail plate or only the part chosen for the design. Such pictures are also appropriate on the jacket, if you stick them closer to the base of the nail.

Observing certain rules of application, you can decorate your nails with a manicure with sliders yourself at home. This saves time for painting nail plates, allows you to create both a full-fledged manicure and an emphasis on one finger.

Decorative stickers are safe for nails. They do not harm their structure, are applied easily and are rarely capricious when removed. In addition, sliders are freely available in many specialized stores, so it will not be difficult to buy them according to your preferences.

Such nail decorations have a wide price range, which allows you to choose both luxurious and expensive ones (from 500 to 1000 rubles) and more acceptable drawings (20 to 100 rubles), which are not inferior in beauty to expensive counterparts.

Depending on the type of stickers, they have different ways of gluing. Each technology has its own nuances, the violation of which will lead to the loss of an impeccable type of manicure.

The subject of the drawings

Colorful pictures can be bought at any cosmetic boutique. At the same time, their subject matter often strikes the imagination and baffles: you want to buy everything, no matter how beautiful it is. The most popular image motifs on such design elements are:

animalistic drawings (all kinds of kittens, dogs, snakes, tigers, panthers, leopards, bears);
birds (peacocks, seagulls, birds of paradise);

ornaments (geometry, scalloped lace, stripes);
prints (floral, abstract patterns, compositions with butterflies, reptile skin designs and animal skin color);
lace (web, all kinds of lace patterns, made in one or more shades, imitation of textile textures);

portraits (famous people, female faces, silhouettes);
cartoon characters (relevant for young people);
Japanese patterns (sakura, geisha, anime sketches, etc.);

New Year's theme (snowmen, snowflakes, bullfinches, deer, Christmas compositions);
fruits and berries (various patterns with one or more items);
rock style (skulls, crosses and similar paraphernalia);
glamor (hearts, bows, stars, gold or silver letters).

Patterns can be colored, monochrome, flat, with a small relief. Some drawings imply symmetry, others do not need it. Today, a free theme is more often used, in which accents are glued to just a few nails.

Kinds

Today, the choice of such products is quite wide. There are many varieties of stickers for nail design.

Aquatic

Water stickers are a thin film located on a white paper base. A feature of decals is the need to be based on a translucent base, so they need careful selection of the shade of varnish. The background should be in harmony with the color palette of the pattern and not merge with it into a single incomprehensible spot.

The disadvantages of this type of stickers include the likelihood of damage to the workpiece in the process of fitting it in size and shape.

Self-adhesive

Such drawings are a photo design (fragments with an adhesive surface located on a special substrate). Their feature is independence. In order to stick them, it is enough to separate the sticky layer and stick the fragment on the surface of the nail.

By themselves, stickers can represent individual items of a particular pattern or be a full-fledged object. They come in the form of a variety of sets of 10 plates, designed specifically to cover the entire area of the nail. The sets created for the jacket are made in the form of stripes.

3D

Stickers of this type differ in volume. They are slightly convex, unlike the usual flat pictures. This kind of sliders can be a full-fledged decorative element or a nail accent.

These stickers are water-based and adhesive-based. In general, they are not difficult to work with, although sometimes difficulties may arise (when designing a manicure on the entire area of \u200b\u200bthe nail). The presence of a small relief (bulge) does not interfere with everyday life, it does not scratch or cling to clothes and other objects.

The advantages of 3D stickers include the ability to combine them with other decorative design elements (such as regular stickers). They are easy to use and often look more beautiful than their counterparts. The disadvantages include the difficulty of removing the sticker when removing the coating. Special gel polish removers are not designed for such procedures, so this sticker will have to be scraped off.

Application methods

There are several methods for applying nail stickers. Each technique is unique in its own way, so you can choose the most optimal option. Implementing a slider design step by step is actually much easier than it might seem at first glance, it does not take much time.

Water based

The sliders are cut to the size of the nails, then lowered into the water. You can use a napkin soaked in water, attaching a cut-out fragment to it on one nail. The film with the picture will peel off easily in both cases.

On uncured gel polish

One of the most reliable slider design methods is the method when pictures are applied to a non-dried layer of pigment. Experienced craftsmen advise using a brush when smoothing the sticker. So the drawing will not tear and lie flat on the surface of the nail plate. The brush allows you to tightly fix the sticker to the base without air bubbles and waves.

The advantage of this method is excellent durability, as the coating layer dries along with the slider. The adhesion of the slider to the coating with this gluing option will be as strong as possible. Therefore, in this case, one layer of fixative (finish) is sufficient.

On top with a sticky layer

This method is very convenient and the easiest. Sliders are applied to the topcoat layer after the pigment. Unlike the base coat, the top coat has a denser and thicker consistency, which simplifies the procedure for applying pictures to the surface of the nail plates.

The sticker is straightened with a brush, and then fixed with a top coat. It is necessary to try so that the size of the sticker, if possible, does not go beyond the lateral borders of the nail plate.

For a finished manicure

This method allows you to update an already finished manicure. If the nails are painted with gel polish, but after a few days you want a change, this is the perfect solution. At the same time, it is not necessary to remove the old coating at all in order to change the design of the nails.

In this case, in order not to create an extra thickness of the coating and an unnatural look, it is better to stick the slider design on an ultrabond (acid-free primer). It does an excellent job of fixing stickers and will not create obstacles in work. After completing the design, you need to fix the manicure with a top coat without a sticky layer.

Photo design for long nails

In the process of work, you need to trim the stickers in shape and size that is most suitable for each specific nail. However, it is not scary if the film protrudes beyond the edge of the end of the nail: then it can be cut with scissors and, after drying, processed with a file.

Straightening the slider design with an elastic brush, you need to remove all voids. If the sticker does not fit well on the surface of the nail, small cuts can be made. Some experts use an orange stick to straighten the film with the design.

After gluing the film, it is fixed with a layer of topcoat without a sticky layer. It is better if the top is glossy: the look of the pattern will be more attractive. In addition, you should not stick such pictures on a dark base if the picture is faded and made in translucent muted colors.

Working with slider design will appeal to every woman, no matter what method of gluing pictures is chosen. The duration of the procedure will not take more than 10-15 minutes, provided that the work will be done calmly and accurately.

Not every experienced master can draw such patterns, and for much more time. The main rule of all stages of design is accuracy at every step. The technique of gluing water-based sliders is somewhat reminiscent of decoupage.

How long should you keep?

With the proper execution of the design, the stickers stay on the nails for at least two to three weeks and even more. The durability of such a manicure is affected by careful handling of the coating. This is especially true for household work, during which hands come into contact with water and aggressive detergents and chemicals.

In order not to have to wonder why the stickers do not stay on the nails for a long time and the beautiful coating quickly peels off, you need to follow all the rules of manicure with gel polish at each stage. It is important to perform all actions carefully, without defects. Any slightest imperfection in bonding will spoil the flawless appearance of the nails and eventually lead to the fact that the coating will have to be removed.

In addition, the durability of the colorful design with stickers is affected by the use of quality components in the work. It is better to buy gel polishes from reliable companies that are time-tested and have positive feedback from experienced craftsmen working with this type of coating.

The coating may shorten the durability in case of hormonal changes in the body during pregnancy. In addition, stickers may stay on the nails less if the nail plates themselves are unhealthy and very thin. A special strengthening gel can help thin nails, which does not need to be removed later by cutting.

How to translate at home?

Gel polish slider design technology requires knowledge of the techniques of the masters working in the salon. To prolong the life of a colorful design, you need to correctly and step by step follow all the instructions, starting from the very beginning.

Before applying the base coat, it is necessary to treat the nails and do a light manicure without soaking. In this case, it is necessary to remove the cuticle, trim the shape of the nails, carefully process the free edge of the nail. Not only the quality of the coating, but also its durability depends on how even it will be.

In addition, you need to consider that the perfect manicure implies the same length and shape of all nails. If oil or cream was used in the treatment of nails, they must be removed.

After that, the surface of the nail plate must be polished with a soft file for natural nails (bafa). This should be done delicately, removing only the gloss. If you press hard on the buff, you can damage the structure of the nail, removing not only its natural protective layer. Filed nails will look matte.

The next step is to use a degreaser (dehydrator). It will remove the residual sawdust after grinding and the remnants of cream or oil, if they were used at the very beginning. At this stage, it is important to pay special attention to the end of the nail, the inside of the free edge and the side ridges. If an untreated area remains, it can lead to a violation of the resistance of the coating.

Having completely removed the keratin layer, you need to use an acid-free primer. It is especially necessary in cases where the nails are thin and soft. This component of manicure helps to improve the adhesion of coatings to the surface of the nails, strengthening their structure.

After preparing the nails for coating, apply a base coat. It should be thin, evenly distributed over the entire surface of the nail plate. It is important not to forget about the end of the nail and the sides. The base coat has a sticky layer that must not be touched: it makes the nail adhere to the pigment to the maximum. When working, you need to try to do everything carefully so as not to violate the integrity of the coating.

A distinctive feature of the entire manicure using gel polish is the need to dry each applied gel-based layer. Imperfections must be removed before polymerization in a UV or LED lamp. A thick layer can quickly crack, which will affect the quality and durability of subsequent steps.

Buying a special lamp can confuse unenlightened shoppers. However, this is an important tool for manicure, because it is thanks to it that gel polish, base and top harden.

You can purchase a budget version of a compact size lamp. It is not necessary to buy a powerful device for drying two hands at the same time: at home, a neat device purchased at an affordable price is quite enough.

After the base coat, a colored gel polish is applied. It usually has good dense pigmentation, so one or two thin layers will be enough for an even background without stripes and unpainted areas. After applying each layer, they are polymerized in a lamp. Drying time depends on the type of lamp.

The LED device is more powerful and reduces the overall time for creating a manicure. Drying of one thin layer in such a lamp is 10-30 seconds. However, manufacturers often produce nail products that are not designed to work with it. In this case, it is better to buy an ultraviolet lamp, it is a universal device for all types of coatings. The polymerization time of one thin layer in it is 2 minutes.

Sliders are glued to the prepared surface. Their design can be the most diverse, it depends on the imagination and style of the intended composition. The method of applying stickers differs from their varieties. This process is very exciting and creative. By gluing pictures, they can be decorated with small rhinestones and microbeads.

After the slider design, you can apply the finishing layer. The top is a fixer, it is applied in a denser layer, and therefore it dries a little longer. The polymerization time in the LED lamp of the top coat is 1 minute, in the ultraviolet - 3-4 minutes.

It is worth noting that UV lamps differ in power. When buying such a device for home use, it is better to choose a model with a power of 36 watts. This is the optimal value so as not to harm the manicure and not disturb the water balance of the skin.

In addition to observing all the above rules, experienced craftsmen working in the nail field recommend choosing the main shade for stickers. thoroughly.

If white is chosen, it is desirable that it be pure, without impurities. It is better to glue bright and attractive stickers on such a background. Such a base is ideal for any slider design, as it can make drawings richer.
One of the actual shades of gel polish for pictures are flesh and beige-pink tones. Thanks to light shades, the picture will not lose its expressiveness and will be clear.

When choosing a contrasting background for drawings, it is important to consider the color combination. The shade of gel polish should be a harmonious basis for the pattern.
Before starting work, you need to prepare the necessary tools so as not to be distracted by searching for them during the manicure.

When designing with water stickers, it is better to use warm water: this way the film will move away from the substrate faster.
If the picture lay in the wrong place, as it was intended, do not try to move it. In this case, there are two ways out: redo it all over again or try to fix the defect with the help of other decor elements (rhinestone, sequin).
A fully finished manicure should be protected from contact with water for at least half an hour after drying the finish layer.
In order for the slider to be a durable and high-quality nail decoration, you need to pay special attention to sealing the free edge of the nail. You must not forget about it with each layer of coating, otherwise the stickers will begin to peel off after a few days.

Problems at work

Sometimes performing all the steps step by step, it is not possible to achieve an impeccable result. The reasons for this usually lie in the following:

If the sticker falls off along with the topcoat layer, then the reason lies in the fact that the top coat or varnish layer has not dried well.
The formation of wrinkles on the surface of the picture indicates that the quality of the sticker is low or its film is thick. However, the reason may be that the slider is too wet.

Chips in the top coat may indicate that it lacked the minimum clearance on the side bolsters.
Flaking of the coating may be caused by insufficient sealing of the butt of the nail. This is a mandatory step of the manicure, which is needed to form a kind of pocket that holds the sticker.

A product such as a vinyl sticker is applied to a car quite easily. Therefore, the procedure for pasting the surface is available for both experienced craftsmen in a car service, and for beginners. This product has become widespread in the circles of motorists due to its affordability, as well as properties.

Vinyl is a flexible and resilient material that can be perfectly printed with full color printing. It also prevents the formation of scratches, which protects the paintwork of the car.

car sticker

The film selection process includes:

choice of color, sticker texture. Variations are possible here: glossy or matte models, as well as black, blue, red or white films;
choice of quantity. This can be done based on the surface area to which the coating is to be glued. Coverage is sold in running meters. This means that even if you need to buy a few centimeters of film, you will have to make a purchase of 1 running meter.

car sticker

Do-it-yourself car stickers consist of the following components:

mounting cover for the possibility of transfer to the surface;
products directly;
white paper base.

In order to successfully do the job of gluing a vinyl film, you will need:

the surface of the car, which was previously washed and cleaned;
a dry rag to level the surface and remove excess moisture;
stationery knife for trimming excess stickers;
squeegee made of rubber, plastic or felt. It is designed to level the surface and remove air bubbles from there;
soap solution (if you will be gluing in a wet way);
household or building hair dryer to heat the workpiece and give it elasticity.

Vinyl application tools

Operation features

To glue the workpiece for a long period of time and not be afraid that it will fall off, follow a few rules:

do not wet the paper backing, otherwise it will be difficult to remove. Paper particles remaining on the surface will help to peel off the workpiece;
do not overheat the vinyl with a building hair dryer to a temperature above 70 degrees, or it will begin to deform and lose its properties;
use a plastic squeegee for mounting cover so as not to scratch the vinyl itself;
the temperature in the room or on the street should not be lower than +10 and not higher than +30 degrees. Under other temperature conditions, gluing the sticker will be very problematic;
indoors or outdoors, where you will glue the film, there should not be a lot of dust. If it gets under the film, it will prevent it from sticking to the surface.

Car wrapping with vinyl

Pasting method

Pre-treatment of the surface of the car will help you fix the stickers on the car with your own hands correctly. It needs to be washed from dirt, all kinds of stains and dust. If dirt remains on the vehicle, it will be visible under a very thin film.

After that, you need to try on the blank on your car and determine the boundaries of its gluing. Please note that the edges of the workpiece will be cut with a clerical knife or wrapped when gluing, so take the workpiece with a margin of several centimeters. By the way, you can glue a large workpiece not immediately, but in parts.

The further algorithm of actions is as follows:

attach the workpiece to the surface of the car. After that, if the product is large, cut it at the junction of the auto parts, pressing it to the surface. It is necessary to cut the product along the gaps located between the parts of the machine;
put the sticker with the vinyl down to remove the paper base by picking it up with a knife or other object;
Moisten the adhesive side of the film, as well as the area of \u200b\u200bthe machine where you plan to place it. If you are using the dry gluing method, simply start gluing the blank onto a dry surface;
apply the product to the prepared area. Check for correct gluing. Until the product is completely dry, you can change its location. To do this, you will need to completely peel it off and start sticking again (do not move);
to make the fastening of the workpiece durable, use a spatula (squeegee) made of rubber or felt. Start smoothing from the center, removing moisture and air bubbles from under the surface. The movements should be zigzag (no matter which way). After that, you will need to work on the second side of the sticker. In order not to have to repeatedly re-glue products, first fix only flat places.
after smoothing flat areas, start working on moldings, spoilers and other parts of the car, the design of which can complicate gluing.

Auto vinyl on the hood of the car

If the main sticker does not lag behind the film, carefully peel it off with a knife and attach it to the body. Once you have an evenly glued surface, you will need to go over it again with a squeegee to remove any residual air bubbles and moisture. If necessary, use a needle or syringe to pierce the vinyl and remove air.